diff options
Diffstat (limited to 'drivers/scsi/ufs/ufs-qcom-ice.c')
| -rw-r--r-- | drivers/scsi/ufs/ufs-qcom-ice.c | 245 |
1 files changed, 0 insertions, 245 deletions
diff --git a/drivers/scsi/ufs/ufs-qcom-ice.c b/drivers/scsi/ufs/ufs-qcom-ice.c deleted file mode 100644 index 745e48ec598f..000000000000 --- a/drivers/scsi/ufs/ufs-qcom-ice.c +++ /dev/null @@ -1,245 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Qualcomm ICE (Inline Crypto Engine) support. - * - * Copyright (c) 2014-2019, The Linux Foundation. All rights reserved. - * Copyright 2019 Google LLC - */ - -#include <linux/delay.h> -#include <linux/platform_device.h> -#include <linux/qcom_scm.h> - -#include "ufs-qcom.h" - -#define AES_256_XTS_KEY_SIZE 64 - -/* QCOM ICE registers */ - -#define QCOM_ICE_REG_CONTROL 0x0000 -#define QCOM_ICE_REG_RESET 0x0004 -#define QCOM_ICE_REG_VERSION 0x0008 -#define QCOM_ICE_REG_FUSE_SETTING 0x0010 -#define QCOM_ICE_REG_PARAMETERS_1 0x0014 -#define QCOM_ICE_REG_PARAMETERS_2 0x0018 -#define QCOM_ICE_REG_PARAMETERS_3 0x001C -#define QCOM_ICE_REG_PARAMETERS_4 0x0020 -#define QCOM_ICE_REG_PARAMETERS_5 0x0024 - -/* QCOM ICE v3.X only */ -#define QCOM_ICE_GENERAL_ERR_STTS 0x0040 -#define QCOM_ICE_INVALID_CCFG_ERR_STTS 0x0030 -#define QCOM_ICE_GENERAL_ERR_MASK 0x0044 - -/* QCOM ICE v2.X only */ -#define QCOM_ICE_REG_NON_SEC_IRQ_STTS 0x0040 -#define QCOM_ICE_REG_NON_SEC_IRQ_MASK 0x0044 - -#define QCOM_ICE_REG_NON_SEC_IRQ_CLR 0x0048 -#define QCOM_ICE_REG_STREAM1_ERROR_SYNDROME1 0x0050 -#define QCOM_ICE_REG_STREAM1_ERROR_SYNDROME2 0x0054 -#define QCOM_ICE_REG_STREAM2_ERROR_SYNDROME1 0x0058 -#define QCOM_ICE_REG_STREAM2_ERROR_SYNDROME2 0x005C -#define QCOM_ICE_REG_STREAM1_BIST_ERROR_VEC 0x0060 -#define QCOM_ICE_REG_STREAM2_BIST_ERROR_VEC 0x0064 -#define QCOM_ICE_REG_STREAM1_BIST_FINISH_VEC 0x0068 -#define QCOM_ICE_REG_STREAM2_BIST_FINISH_VEC 0x006C -#define QCOM_ICE_REG_BIST_STATUS 0x0070 -#define QCOM_ICE_REG_BYPASS_STATUS 0x0074 -#define QCOM_ICE_REG_ADVANCED_CONTROL 0x1000 -#define QCOM_ICE_REG_ENDIAN_SWAP 0x1004 -#define QCOM_ICE_REG_TEST_BUS_CONTROL 0x1010 -#define QCOM_ICE_REG_TEST_BUS_REG 0x1014 - -/* BIST ("built-in self-test"?) status flags */ -#define QCOM_ICE_BIST_STATUS_MASK 0xF0000000 - -#define QCOM_ICE_FUSE_SETTING_MASK 0x1 -#define QCOM_ICE_FORCE_HW_KEY0_SETTING_MASK 0x2 -#define QCOM_ICE_FORCE_HW_KEY1_SETTING_MASK 0x4 - -#define qcom_ice_writel(host, val, reg) \ - writel((val), (host)->ice_mmio + (reg)) -#define qcom_ice_readl(host, reg) \ - readl((host)->ice_mmio + (reg)) - -static bool qcom_ice_supported(struct ufs_qcom_host *host) -{ - struct device *dev = host->hba->dev; - u32 regval = qcom_ice_readl(host, QCOM_ICE_REG_VERSION); - int major = regval >> 24; - int minor = (regval >> 16) & 0xFF; - int step = regval & 0xFFFF; - - /* For now this driver only supports ICE version 3. */ - if (major != 3) { - dev_warn(dev, "Unsupported ICE version: v%d.%d.%d\n", - major, minor, step); - return false; - } - - dev_info(dev, "Found QC Inline Crypto Engine (ICE) v%d.%d.%d\n", - major, minor, step); - - /* If fuses are blown, ICE might not work in the standard way. */ - regval = qcom_ice_readl(host, QCOM_ICE_REG_FUSE_SETTING); - if (regval & (QCOM_ICE_FUSE_SETTING_MASK | - QCOM_ICE_FORCE_HW_KEY0_SETTING_MASK | - QCOM_ICE_FORCE_HW_KEY1_SETTING_MASK)) { - dev_warn(dev, "Fuses are blown; ICE is unusable!\n"); - return false; - } - return true; -} - -int ufs_qcom_ice_init(struct ufs_qcom_host *host) -{ - struct ufs_hba *hba = host->hba; - struct device *dev = hba->dev; - struct platform_device *pdev = to_platform_device(dev); - struct resource *res; - int err; - - if (!(ufshcd_readl(hba, REG_CONTROLLER_CAPABILITIES) & - MASK_CRYPTO_SUPPORT)) - return 0; - - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ice"); - if (!res) { - dev_warn(dev, "ICE registers not found\n"); - goto disable; - } - - if (!qcom_scm_ice_available()) { - dev_warn(dev, "ICE SCM interface not found\n"); - goto disable; - } - - host->ice_mmio = devm_ioremap_resource(dev, res); - if (IS_ERR(host->ice_mmio)) { - err = PTR_ERR(host->ice_mmio); - dev_err(dev, "Failed to map ICE registers; err=%d\n", err); - return err; - } - - if (!qcom_ice_supported(host)) - goto disable; - - return 0; - -disable: - dev_warn(dev, "Disabling inline encryption support\n"); - hba->caps &= ~UFSHCD_CAP_CRYPTO; - return 0; -} - -static void qcom_ice_low_power_mode_enable(struct ufs_qcom_host *host) -{ - u32 regval; - - regval = qcom_ice_readl(host, QCOM_ICE_REG_ADVANCED_CONTROL); - /* - * Enable low power mode sequence - * [0]-0, [1]-0, [2]-0, [3]-E, [4]-0, [5]-0, [6]-0, [7]-0 - */ - regval |= 0x7000; - qcom_ice_writel(host, regval, QCOM_ICE_REG_ADVANCED_CONTROL); -} - -static void qcom_ice_optimization_enable(struct ufs_qcom_host *host) -{ - u32 regval; - - /* ICE Optimizations Enable Sequence */ - regval = qcom_ice_readl(host, QCOM_ICE_REG_ADVANCED_CONTROL); - regval |= 0xD807100; - /* ICE HPG requires delay before writing */ - udelay(5); - qcom_ice_writel(host, regval, QCOM_ICE_REG_ADVANCED_CONTROL); - udelay(5); -} - -int ufs_qcom_ice_enable(struct ufs_qcom_host *host) -{ - if (!(host->hba->caps & UFSHCD_CAP_CRYPTO)) - return 0; - qcom_ice_low_power_mode_enable(host); - qcom_ice_optimization_enable(host); - return ufs_qcom_ice_resume(host); -} - -/* Poll until all BIST bits are reset */ -static int qcom_ice_wait_bist_status(struct ufs_qcom_host *host) -{ - int count; - u32 reg; - - for (count = 0; count < 100; count++) { - reg = qcom_ice_readl(host, QCOM_ICE_REG_BIST_STATUS); - if (!(reg & QCOM_ICE_BIST_STATUS_MASK)) - break; - udelay(50); - } - if (reg) - return -ETIMEDOUT; - return 0; -} - -int ufs_qcom_ice_resume(struct ufs_qcom_host *host) -{ - int err; - - if (!(host->hba->caps & UFSHCD_CAP_CRYPTO)) - return 0; - - err = qcom_ice_wait_bist_status(host); - if (err) { - dev_err(host->hba->dev, "BIST status error (%d)\n", err); - return err; - } - return 0; -} - -/* - * Program a key into a QC ICE keyslot, or evict a keyslot. QC ICE requires - * vendor-specific SCM calls for this; it doesn't support the standard way. - */ -int ufs_qcom_ice_program_key(struct ufs_hba *hba, - const union ufs_crypto_cfg_entry *cfg, int slot) -{ - union ufs_crypto_cap_entry cap; - union { - u8 bytes[AES_256_XTS_KEY_SIZE]; - u32 words[AES_256_XTS_KEY_SIZE / sizeof(u32)]; - } key; - int i; - int err; - - if (!(cfg->config_enable & UFS_CRYPTO_CONFIGURATION_ENABLE)) - return qcom_scm_ice_invalidate_key(slot); - - /* Only AES-256-XTS has been tested so far. */ - cap = hba->crypto_cap_array[cfg->crypto_cap_idx]; - if (cap.algorithm_id != UFS_CRYPTO_ALG_AES_XTS || - cap.key_size != UFS_CRYPTO_KEY_SIZE_256) { - dev_err_ratelimited(hba->dev, - "Unhandled crypto capability; algorithm_id=%d, key_size=%d\n", - cap.algorithm_id, cap.key_size); - return -EINVAL; - } - - memcpy(key.bytes, cfg->crypto_key, AES_256_XTS_KEY_SIZE); - - /* - * The SCM call byte-swaps the 32-bit words of the key. So we have to - * do the same, in order for the final key be correct. - */ - for (i = 0; i < ARRAY_SIZE(key.words); i++) - __cpu_to_be32s(&key.words[i]); - - err = qcom_scm_ice_set_key(slot, key.bytes, AES_256_XTS_KEY_SIZE, - QCOM_SCM_ICE_CIPHER_AES_256_XTS, - cfg->data_unit_size); - memzero_explicit(&key, sizeof(key)); - return err; -} |