summaryrefslogtreecommitdiff
path: root/drivers/tty
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/tty')
-rw-r--r--drivers/tty/hvc/hvc_console.c38
-rw-r--r--drivers/tty/serial/8250/8250_dw.c4
-rw-r--r--drivers/tty/serial/cpm_uart/cpm_uart_core.c10
-rw-r--r--drivers/tty/serial/fsl_lpuart.c3
-rw-r--r--drivers/tty/serial/imx.c8
-rw-r--r--drivers/tty/serial/mvebu-uart.c1
-rw-r--r--drivers/tty/serial/sh-sci.c56
-rw-r--r--drivers/tty/tty_io.c11
-rw-r--r--drivers/tty/vt/vt_ioctl.c4
9 files changed, 104 insertions, 31 deletions
diff --git a/drivers/tty/hvc/hvc_console.c b/drivers/tty/hvc/hvc_console.c
index 5414c4a87bea..27284a2dcd2b 100644
--- a/drivers/tty/hvc/hvc_console.c
+++ b/drivers/tty/hvc/hvc_console.c
@@ -522,6 +522,8 @@ static int hvc_write(struct tty_struct *tty, const unsigned char *buf, int count
return -EIO;
while (count > 0) {
+ int ret = 0;
+
spin_lock_irqsave(&hp->lock, flags);
rsize = hp->outbuf_size - hp->n_outbuf;
@@ -537,10 +539,13 @@ static int hvc_write(struct tty_struct *tty, const unsigned char *buf, int count
}
if (hp->n_outbuf > 0)
- hvc_push(hp);
+ ret = hvc_push(hp);
spin_unlock_irqrestore(&hp->lock, flags);
+ if (!ret)
+ break;
+
if (count) {
if (hp->n_outbuf > 0)
hvc_flush(hp);
@@ -623,6 +628,15 @@ static int hvc_chars_in_buffer(struct tty_struct *tty)
#define MAX_TIMEOUT (2000)
static u32 timeout = MIN_TIMEOUT;
+/*
+ * Maximum number of bytes to get from the console driver if hvc_poll is
+ * called from driver (and can't sleep). Any more than this and we break
+ * and start polling with khvcd. This value was derived from from an OpenBMC
+ * console with the OPAL driver that results in about 0.25ms interrupts off
+ * latency.
+ */
+#define HVC_ATOMIC_READ_MAX 128
+
#define HVC_POLL_READ 0x00000001
#define HVC_POLL_WRITE 0x00000002
@@ -669,8 +683,8 @@ static int __hvc_poll(struct hvc_struct *hp, bool may_sleep)
if (!hp->irq_requested)
poll_mask |= HVC_POLL_READ;
+ read_again:
/* Read data if any */
-
count = tty_buffer_request_room(&hp->port, N_INBUF);
/* If flip is full, just reschedule a later read */
@@ -717,9 +731,23 @@ static int __hvc_poll(struct hvc_struct *hp, bool may_sleep)
#endif /* CONFIG_MAGIC_SYSRQ */
tty_insert_flip_char(&hp->port, buf[i], 0);
}
- if (n == count)
- poll_mask |= HVC_POLL_READ;
- read_total = n;
+ read_total += n;
+
+ if (may_sleep) {
+ /* Keep going until the flip is full */
+ spin_unlock_irqrestore(&hp->lock, flags);
+ cond_resched();
+ spin_lock_irqsave(&hp->lock, flags);
+ goto read_again;
+ } else if (read_total < HVC_ATOMIC_READ_MAX) {
+ /* Break and defer if it's a large read in atomic */
+ goto read_again;
+ }
+
+ /*
+ * Latency break, schedule another poll immediately.
+ */
+ poll_mask |= HVC_POLL_READ;
out:
/* Wakeup write queue if necessary */
diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index fa8dcb470640..d31b975dd3fd 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -630,10 +630,6 @@ static int dw8250_probe(struct platform_device *pdev)
if (!data->skip_autocfg)
dw8250_setup_port(p);
-#ifdef CONFIG_PM
- uart.capabilities |= UART_CAP_RPM;
-#endif
-
/* If we have a valid fifosize, try hooking up DMA */
if (p->fifosize) {
data->dma.rxconf.src_maxburst = p->fifosize / 4;
diff --git a/drivers/tty/serial/cpm_uart/cpm_uart_core.c b/drivers/tty/serial/cpm_uart/cpm_uart_core.c
index 24a5f05e769b..e5389591bb4f 100644
--- a/drivers/tty/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/tty/serial/cpm_uart/cpm_uart_core.c
@@ -1054,8 +1054,8 @@ static int poll_wait_key(char *obuf, struct uart_cpm_port *pinfo)
/* Get the address of the host memory buffer.
*/
bdp = pinfo->rx_cur;
- while (bdp->cbd_sc & BD_SC_EMPTY)
- ;
+ if (bdp->cbd_sc & BD_SC_EMPTY)
+ return NO_POLL_CHAR;
/* If the buffer address is in the CPM DPRAM, don't
* convert it.
@@ -1090,7 +1090,11 @@ static int cpm_get_poll_char(struct uart_port *port)
poll_chars = 0;
}
if (poll_chars <= 0) {
- poll_chars = poll_wait_key(poll_buf, pinfo);
+ int ret = poll_wait_key(poll_buf, pinfo);
+
+ if (ret == NO_POLL_CHAR)
+ return ret;
+ poll_chars = ret;
pollp = poll_buf;
}
poll_chars--;
diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index 51e47a63d61a..3f8d1274fc85 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -979,7 +979,8 @@ static inline int lpuart_start_rx_dma(struct lpuart_port *sport)
struct circ_buf *ring = &sport->rx_ring;
int ret, nent;
int bits, baud;
- struct tty_struct *tty = tty_port_tty_get(&sport->port.state->port);
+ struct tty_port *port = &sport->port.state->port;
+ struct tty_struct *tty = port->tty;
struct ktermios *termios = &tty->termios;
baud = tty_get_baud_rate(tty);
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index 239c0fa2e981..0f67197a3783 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -2351,6 +2351,14 @@ static int imx_uart_probe(struct platform_device *pdev)
ret);
return ret;
}
+
+ ret = devm_request_irq(&pdev->dev, rtsirq, imx_uart_rtsint, 0,
+ dev_name(&pdev->dev), sport);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to request rts irq: %d\n",
+ ret);
+ return ret;
+ }
} else {
ret = devm_request_irq(&pdev->dev, rxirq, imx_uart_int, 0,
dev_name(&pdev->dev), sport);
diff --git a/drivers/tty/serial/mvebu-uart.c b/drivers/tty/serial/mvebu-uart.c
index d04b5eeea3c6..170e446a2f62 100644
--- a/drivers/tty/serial/mvebu-uart.c
+++ b/drivers/tty/serial/mvebu-uart.c
@@ -511,6 +511,7 @@ static void mvebu_uart_set_termios(struct uart_port *port,
termios->c_iflag |= old->c_iflag & ~(INPCK | IGNPAR);
termios->c_cflag &= CREAD | CBAUD;
termios->c_cflag |= old->c_cflag & ~(CREAD | CBAUD);
+ termios->c_cflag |= CS8;
}
spin_unlock_irqrestore(&port->lock, flags);
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index ac4424bf6b13..ab3f6e91853d 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -292,6 +292,33 @@ static const struct sci_port_params sci_port_params[SCIx_NR_REGTYPES] = {
},
/*
+ * The "SCIFA" that is in RZ/T and RZ/A2.
+ * It looks like a normal SCIF with FIFO data, but with a
+ * compressed address space. Also, the break out of interrupts
+ * are different: ERI/BRI, RXI, TXI, TEI, DRI.
+ */
+ [SCIx_RZ_SCIFA_REGTYPE] = {
+ .regs = {
+ [SCSMR] = { 0x00, 16 },
+ [SCBRR] = { 0x02, 8 },
+ [SCSCR] = { 0x04, 16 },
+ [SCxTDR] = { 0x06, 8 },
+ [SCxSR] = { 0x08, 16 },
+ [SCxRDR] = { 0x0A, 8 },
+ [SCFCR] = { 0x0C, 16 },
+ [SCFDR] = { 0x0E, 16 },
+ [SCSPTR] = { 0x10, 16 },
+ [SCLSR] = { 0x12, 16 },
+ },
+ .fifosize = 16,
+ .overrun_reg = SCLSR,
+ .overrun_mask = SCLSR_ORER,
+ .sampling_rate_mask = SCI_SR(32),
+ .error_mask = SCIF_DEFAULT_ERROR_MASK,
+ .error_clear = SCIF_ERROR_CLEAR,
+ },
+
+ /*
* Common SH-3 SCIF definitions.
*/
[SCIx_SH3_SCIF_REGTYPE] = {
@@ -319,15 +346,15 @@ static const struct sci_port_params sci_port_params[SCIx_NR_REGTYPES] = {
[SCIx_SH4_SCIF_REGTYPE] = {
.regs = {
[SCSMR] = { 0x00, 16 },
- [SCBRR] = { 0x02, 8 },
- [SCSCR] = { 0x04, 16 },
- [SCxTDR] = { 0x06, 8 },
- [SCxSR] = { 0x08, 16 },
- [SCxRDR] = { 0x0a, 8 },
- [SCFCR] = { 0x0c, 16 },
- [SCFDR] = { 0x0e, 16 },
- [SCSPTR] = { 0x10, 16 },
- [SCLSR] = { 0x12, 16 },
+ [SCBRR] = { 0x04, 8 },
+ [SCSCR] = { 0x08, 16 },
+ [SCxTDR] = { 0x0c, 8 },
+ [SCxSR] = { 0x10, 16 },
+ [SCxRDR] = { 0x14, 8 },
+ [SCFCR] = { 0x18, 16 },
+ [SCFDR] = { 0x1c, 16 },
+ [SCSPTR] = { 0x20, 16 },
+ [SCLSR] = { 0x24, 16 },
},
.fifosize = 16,
.overrun_reg = SCLSR,
@@ -2810,7 +2837,7 @@ static int sci_init_single(struct platform_device *dev,
{
struct uart_port *port = &sci_port->port;
const struct resource *res;
- unsigned int i, regtype;
+ unsigned int i;
int ret;
sci_port->cfg = p;
@@ -2847,7 +2874,6 @@ static int sci_init_single(struct platform_device *dev,
if (unlikely(sci_port->params == NULL))
return -EINVAL;
- regtype = sci_port->params - sci_port_params;
switch (p->type) {
case PORT_SCIFB:
sci_port->rx_trigger = 48;
@@ -2902,10 +2928,6 @@ static int sci_init_single(struct platform_device *dev,
port->regshift = 1;
}
- if (regtype == SCIx_SH4_SCIF_REGTYPE)
- if (sci_port->reg_size >= 0x20)
- port->regshift = 1;
-
/*
* The UART port needs an IRQ value, so we peg this to the RX IRQ
* for the multi-IRQ ports, which is where we are primarily
@@ -3110,6 +3132,10 @@ static const struct of_device_id of_sci_match[] = {
.compatible = "renesas,scif-r7s72100",
.data = SCI_OF_DATA(PORT_SCIF, SCIx_SH2_SCIF_FIFODATA_REGTYPE),
},
+ {
+ .compatible = "renesas,scif-r7s9210",
+ .data = SCI_OF_DATA(PORT_SCIF, SCIx_RZ_SCIFA_REGTYPE),
+ },
/* Family-specific types */
{
.compatible = "renesas,rcar-gen1-scif",
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index 32bc3e3fe4d3..5e5da9acaf0a 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -1255,6 +1255,7 @@ static void tty_driver_remove_tty(struct tty_driver *driver, struct tty_struct *
static int tty_reopen(struct tty_struct *tty)
{
struct tty_driver *driver = tty->driver;
+ int retval;
if (driver->type == TTY_DRIVER_TYPE_PTY &&
driver->subtype == PTY_TYPE_MASTER)
@@ -1268,10 +1269,14 @@ static int tty_reopen(struct tty_struct *tty)
tty->count++;
- if (!tty->ldisc)
- return tty_ldisc_reinit(tty, tty->termios.c_line);
+ if (tty->ldisc)
+ return 0;
- return 0;
+ retval = tty_ldisc_reinit(tty, tty->termios.c_line);
+ if (retval)
+ tty->count--;
+
+ return retval;
}
/**
diff --git a/drivers/tty/vt/vt_ioctl.c b/drivers/tty/vt/vt_ioctl.c
index a78ad10a119b..73cdc0d633dd 100644
--- a/drivers/tty/vt/vt_ioctl.c
+++ b/drivers/tty/vt/vt_ioctl.c
@@ -32,6 +32,8 @@
#include <asm/io.h>
#include <linux/uaccess.h>
+#include <linux/nospec.h>
+
#include <linux/kbd_kern.h>
#include <linux/vt_kern.h>
#include <linux/kbd_diacr.h>
@@ -700,6 +702,8 @@ int vt_ioctl(struct tty_struct *tty,
if (vsa.console == 0 || vsa.console > MAX_NR_CONSOLES)
ret = -ENXIO;
else {
+ vsa.console = array_index_nospec(vsa.console,
+ MAX_NR_CONSOLES + 1);
vsa.console--;
console_lock();
ret = vc_allocate(vsa.console);
generated by cgit v1.2.3 (git 2.39.1) at 2025-02-04 09:47:46 +0000