summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/thermal/imx_thermal.c20
-rw-r--r--drivers/thermal/intel_powerclamp.c11
-rw-r--r--drivers/thermal/thermal_core.c3
3 files changed, 33 insertions, 1 deletions
diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c
index 77a962f1837b..deab7baeeb72 100644
--- a/drivers/thermal/imx_thermal.c
+++ b/drivers/thermal/imx_thermal.c
@@ -7,6 +7,7 @@
*
*/
+#include <linux/clk.h>
#include <linux/cpu_cooling.h>
#include <linux/cpufreq.h>
#include <linux/delay.h>
@@ -73,6 +74,7 @@ struct imx_thermal_data {
unsigned long last_temp;
bool irq_enabled;
int irq;
+ struct clk *thermal_clk;
};
static void imx_set_alarm_temp(struct imx_thermal_data *data,
@@ -457,6 +459,22 @@ static int imx_thermal_probe(struct platform_device *pdev)
return ret;
}
+ data->thermal_clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(data->thermal_clk)) {
+ dev_warn(&pdev->dev, "failed to get thermal clk!\n");
+ } else {
+ /*
+ * Thermal sensor needs clk on to get correct value, normally
+ * we should enable its clk before taking measurement and disable
+ * clk after measurement is done, but if alarm function is enabled,
+ * hardware will auto measure the temperature periodically, so we
+ * need to keep the clk always on for alarm function.
+ */
+ ret = clk_prepare_enable(data->thermal_clk);
+ if (ret)
+ dev_warn(&pdev->dev, "failed to enable thermal clk: %d\n", ret);
+ }
+
/* Enable measurements at ~ 10 Hz */
regmap_write(map, TEMPSENSE1 + REG_CLR, TEMPSENSE1_MEASURE_FREQ);
measure_freq = DIV_ROUND_UP(32768, 10); /* 10 Hz */
@@ -478,6 +496,8 @@ static int imx_thermal_remove(struct platform_device *pdev)
/* Disable measurements */
regmap_write(map, TEMPSENSE0 + REG_SET, TEMPSENSE0_POWER_DOWN);
+ if (!IS_ERR(data->thermal_clk))
+ clk_disable_unprepare(data->thermal_clk);
thermal_zone_device_unregister(data->tz);
cpufreq_cooling_unregister(data->cdev);
diff --git a/drivers/thermal/intel_powerclamp.c b/drivers/thermal/intel_powerclamp.c
index 8f181b3f842b..67b608ef2cb2 100644
--- a/drivers/thermal/intel_powerclamp.c
+++ b/drivers/thermal/intel_powerclamp.c
@@ -206,6 +206,15 @@ static void find_target_mwait(void)
}
+static bool has_pkg_state_counter(void)
+{
+ u64 tmp;
+ return !rdmsrl_safe(MSR_PKG_C2_RESIDENCY, &tmp) ||
+ !rdmsrl_safe(MSR_PKG_C3_RESIDENCY, &tmp) ||
+ !rdmsrl_safe(MSR_PKG_C6_RESIDENCY, &tmp) ||
+ !rdmsrl_safe(MSR_PKG_C7_RESIDENCY, &tmp);
+}
+
static u64 pkg_state_counter(void)
{
u64 val;
@@ -500,7 +509,7 @@ static int start_power_clamp(void)
struct task_struct *thread;
/* check if pkg cstate counter is completely 0, abort in this case */
- if (!pkg_state_counter()) {
+ if (!has_pkg_state_counter()) {
pr_err("pkg cstate counter not functional, abort\n");
return -EINVAL;
}
diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c
index a621e90cbf40..338a88bf6662 100644
--- a/drivers/thermal/thermal_core.c
+++ b/drivers/thermal/thermal_core.c
@@ -781,6 +781,9 @@ emul_temp_store(struct device *dev, struct device_attribute *attr,
ret = tz->ops->set_emul_temp(tz, temperature);
}
+ if (!ret)
+ thermal_zone_device_update(tz);
+
return ret ? ret : count;
}
static DEVICE_ATTR(emul_temp, S_IWUSR, NULL, emul_temp_store);