diff options
Diffstat (limited to 'drivers')
59 files changed, 1226 insertions, 868 deletions
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig index 212735f3f074..35da507411a0 100644 --- a/drivers/acpi/Kconfig +++ b/drivers/acpi/Kconfig @@ -65,7 +65,7 @@ config ACPI_SLEEP config ACPI_PROCFS_POWER bool "Deprecated power /proc/acpi directories" - depends on PROC_FS + depends on X86 && PROC_FS help For backwards compatibility, this option allows deprecated power /proc/acpi/ directories to exist, even when diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile index 8a063e276530..73d840bef455 100644 --- a/drivers/acpi/Makefile +++ b/drivers/acpi/Makefile @@ -52,9 +52,6 @@ acpi-$(CONFIG_X86) += acpi_cmos_rtc.o acpi-$(CONFIG_DEBUG_FS) += debugfs.o acpi-$(CONFIG_ACPI_NUMA) += numa.o acpi-$(CONFIG_ACPI_PROCFS_POWER) += cm_sbs.o -ifdef CONFIG_ACPI_VIDEO -acpi-y += video_detect.o -endif acpi-y += acpi_lpat.o acpi-$(CONFIG_ACPI_GENERIC_GSI) += gsi.o @@ -95,3 +92,5 @@ obj-$(CONFIG_ACPI_EXTLOG) += acpi_extlog.o obj-$(CONFIG_PMIC_OPREGION) += pmic/intel_pmic.o obj-$(CONFIG_CRC_PMIC_OPREGION) += pmic/intel_pmic_crc.o obj-$(CONFIG_XPOWER_PMIC_OPREGION) += pmic/intel_pmic_xpower.o + +video-objs += acpi_video.o video_detect.o diff --git a/drivers/acpi/ac.c b/drivers/acpi/ac.c index bbcc2b5a70d4..9b5354a2cd08 100644 --- a/drivers/acpi/ac.c +++ b/drivers/acpi/ac.c @@ -308,7 +308,7 @@ static int thinkpad_e530_quirk(const struct dmi_system_id *d) return 0; } -static struct dmi_system_id ac_dmi_table[] = { +static const struct dmi_system_id ac_dmi_table[] = { { .callback = thinkpad_e530_quirk, .ident = "thinkpad e530", diff --git a/drivers/acpi/acpi_lpss.c b/drivers/acpi/acpi_lpss.c index 37fb19047603..569ee090343f 100644 --- a/drivers/acpi/acpi_lpss.c +++ b/drivers/acpi/acpi_lpss.c @@ -129,50 +129,50 @@ static void byt_i2c_setup(struct lpss_private_data *pdata) writel(0, pdata->mmio_base + LPSS_I2C_ENABLE); } -static struct lpss_device_desc lpt_dev_desc = { +static const struct lpss_device_desc lpt_dev_desc = { .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_LTR, .prv_offset = 0x800, }; -static struct lpss_device_desc lpt_i2c_dev_desc = { +static const struct lpss_device_desc lpt_i2c_dev_desc = { .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_LTR, .prv_offset = 0x800, }; -static struct lpss_device_desc lpt_uart_dev_desc = { +static const struct lpss_device_desc lpt_uart_dev_desc = { .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_LTR, .clk_con_id = "baudclk", .prv_offset = 0x800, .setup = lpss_uart_setup, }; -static struct lpss_device_desc lpt_sdio_dev_desc = { +static const struct lpss_device_desc lpt_sdio_dev_desc = { .flags = LPSS_LTR, .prv_offset = 0x1000, .prv_size_override = 0x1018, }; -static struct lpss_device_desc byt_pwm_dev_desc = { +static const struct lpss_device_desc byt_pwm_dev_desc = { .flags = LPSS_SAVE_CTX, }; -static struct lpss_device_desc byt_uart_dev_desc = { +static const struct lpss_device_desc byt_uart_dev_desc = { .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_SAVE_CTX, .clk_con_id = "baudclk", .prv_offset = 0x800, .setup = lpss_uart_setup, }; -static struct lpss_device_desc byt_spi_dev_desc = { +static const struct lpss_device_desc byt_spi_dev_desc = { .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_SAVE_CTX, .prv_offset = 0x400, }; -static struct lpss_device_desc byt_sdio_dev_desc = { +static const struct lpss_device_desc byt_sdio_dev_desc = { .flags = LPSS_CLK, }; -static struct lpss_device_desc byt_i2c_dev_desc = { +static const struct lpss_device_desc byt_i2c_dev_desc = { .flags = LPSS_CLK | LPSS_SAVE_CTX, .prv_offset = 0x800, .setup = byt_i2c_setup, @@ -323,14 +323,14 @@ out: static int acpi_lpss_create_device(struct acpi_device *adev, const struct acpi_device_id *id) { - struct lpss_device_desc *dev_desc; + const struct lpss_device_desc *dev_desc; struct lpss_private_data *pdata; struct resource_entry *rentry; struct list_head resource_list; struct platform_device *pdev; int ret; - dev_desc = (struct lpss_device_desc *)id->driver_data; + dev_desc = (const struct lpss_device_desc *)id->driver_data; if (!dev_desc) { pdev = acpi_create_platform_device(adev); return IS_ERR_OR_NULL(pdev) ? PTR_ERR(pdev) : 1; diff --git a/drivers/acpi/acpi_processor.c b/drivers/acpi/acpi_processor.c index 58f335ca2e75..92a5f738e370 100644 --- a/drivers/acpi/acpi_processor.c +++ b/drivers/acpi/acpi_processor.c @@ -170,7 +170,7 @@ static int acpi_processor_hotadd_init(struct acpi_processor *pr) acpi_status status; int ret; - if (pr->phys_id == PHYS_CPUID_INVALID) + if (invalid_phys_cpuid(pr->phys_id)) return -ENODEV; status = acpi_evaluate_integer(pr->handle, "_STA", NULL, &sta); @@ -215,8 +215,7 @@ static int acpi_processor_get_info(struct acpi_device *device) union acpi_object object = { 0 }; struct acpi_buffer buffer = { sizeof(union acpi_object), &object }; struct acpi_processor *pr = acpi_driver_data(device); - phys_cpuid_t phys_id; - int cpu_index, device_declaration = 0; + int device_declaration = 0; acpi_status status = AE_OK; static int cpu0_initialized; unsigned long long value; @@ -263,29 +262,28 @@ static int acpi_processor_get_info(struct acpi_device *device) pr->acpi_id = value; } - phys_id = acpi_get_phys_id(pr->handle, device_declaration, pr->acpi_id); - if (phys_id == PHYS_CPUID_INVALID) + pr->phys_id = acpi_get_phys_id(pr->handle, device_declaration, + pr->acpi_id); + if (invalid_phys_cpuid(pr->phys_id)) acpi_handle_debug(pr->handle, "failed to get CPU physical ID.\n"); - pr->phys_id = phys_id; - cpu_index = acpi_map_cpuid(pr->phys_id, pr->acpi_id); + pr->id = acpi_map_cpuid(pr->phys_id, pr->acpi_id); if (!cpu0_initialized && !acpi_has_cpu_in_madt()) { cpu0_initialized = 1; /* * Handle UP system running SMP kernel, with no CPU * entry in MADT */ - if ((cpu_index == -1) && (num_online_cpus() == 1)) - cpu_index = 0; + if (invalid_logical_cpuid(pr->id) && (num_online_cpus() == 1)) + pr->id = 0; } - pr->id = cpu_index; /* * Extra Processor objects may be enumerated on MP systems with * less than the max # of CPUs. They should be ignored _iff * they are physically not present. */ - if (pr->id == -1) { + if (invalid_logical_cpuid(pr->id)) { int ret = acpi_processor_hotadd_init(pr); if (ret) return ret; diff --git a/drivers/acpi/video.c b/drivers/acpi/acpi_video.c index cc79d3fedfb2..8c2fe2f2f9fd 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/acpi_video.c @@ -43,7 +43,7 @@ #include <acpi/video.h> #include <asm/uaccess.h> -#include "internal.h" +#define PREFIX "ACPI: " #define ACPI_VIDEO_BUS_NAME "Video Bus" #define ACPI_VIDEO_DEVICE_NAME "Video Device" @@ -78,26 +78,17 @@ module_param(brightness_switch_enabled, bool, 0644); static bool allow_duplicates; module_param(allow_duplicates, bool, 0644); -/* - * For Windows 8 systems: used to decide if video module - * should skip registering backlight interface of its own. - */ -enum { - NATIVE_BACKLIGHT_NOT_SET = -1, - NATIVE_BACKLIGHT_OFF, - NATIVE_BACKLIGHT_ON, -}; - -static int use_native_backlight_param = NATIVE_BACKLIGHT_NOT_SET; -module_param_named(use_native_backlight, use_native_backlight_param, int, 0444); -static int use_native_backlight_dmi = NATIVE_BACKLIGHT_NOT_SET; +static int disable_backlight_sysfs_if = -1; +module_param(disable_backlight_sysfs_if, int, 0444); static int register_count; +static DEFINE_MUTEX(register_count_mutex); static struct mutex video_list_lock; static struct list_head video_bus_head; static int acpi_video_bus_add(struct acpi_device *device); static int acpi_video_bus_remove(struct acpi_device *device); static void acpi_video_bus_notify(struct acpi_device *device, u32 event); +void acpi_video_detect_exit(void); static const struct acpi_device_id video_device_ids[] = { {ACPI_VIDEO_HID, 0}, @@ -157,7 +148,6 @@ struct acpi_video_enumerated_device { struct acpi_video_bus { struct acpi_device *device; bool backlight_registered; - bool backlight_notifier_registered; u8 dos_setting; struct acpi_video_enumerated_device *attached_array; u8 attached_count; @@ -170,7 +160,6 @@ struct acpi_video_bus { struct input_dev *input; char phys[32]; /* for input device */ struct notifier_block pm_nb; - struct notifier_block backlight_nb; }; struct acpi_video_device_flags { @@ -241,24 +230,6 @@ static int acpi_video_get_next_level(struct acpi_video_device *device, u32 level_current, u32 event); static void acpi_video_switch_brightness(struct work_struct *work); -static bool acpi_video_use_native_backlight(void) -{ - if (use_native_backlight_param != NATIVE_BACKLIGHT_NOT_SET) - return use_native_backlight_param; - else if (use_native_backlight_dmi != NATIVE_BACKLIGHT_NOT_SET) - return use_native_backlight_dmi; - return acpi_osi_is_win8(); -} - -bool acpi_video_verify_backlight_support(void) -{ - if (acpi_video_use_native_backlight() && - backlight_device_registered(BACKLIGHT_RAW)) - return false; - return acpi_video_backlight_support(); -} -EXPORT_SYMBOL_GPL(acpi_video_verify_backlight_support); - /* backlight device sysfs support */ static int acpi_video_get_brightness(struct backlight_device *bd) { @@ -413,25 +384,21 @@ acpi_video_device_lcd_set_level(struct acpi_video_device *device, int level) */ static int bqc_offset_aml_bug_workaround; -static int __init video_set_bqc_offset(const struct dmi_system_id *d) +static int video_set_bqc_offset(const struct dmi_system_id *d) { bqc_offset_aml_bug_workaround = 9; return 0; } -static int __init video_disable_native_backlight(const struct dmi_system_id *d) -{ - use_native_backlight_dmi = NATIVE_BACKLIGHT_OFF; - return 0; -} - -static int __init video_enable_native_backlight(const struct dmi_system_id *d) +static int video_disable_backlight_sysfs_if( + const struct dmi_system_id *d) { - use_native_backlight_dmi = NATIVE_BACKLIGHT_ON; + if (disable_backlight_sysfs_if == -1) + disable_backlight_sysfs_if = 1; return 0; } -static struct dmi_system_id video_dmi_table[] __initdata = { +static struct dmi_system_id video_dmi_table[] = { /* * Broken _BQC workaround http://bugzilla.kernel.org/show_bug.cgi?id=13121 */ @@ -477,110 +444,19 @@ static struct dmi_system_id video_dmi_table[] __initdata = { }, /* - * These models have a working acpi_video backlight control, and using - * native backlight causes a regression where backlight does not work - * when userspace is not handling brightness key events. Disable - * native_backlight on these to fix this: - * https://bugzilla.kernel.org/show_bug.cgi?id=81691 + * Some machines have a broken acpi-video interface for brightness + * control, but still need an acpi_video_device_lcd_set_level() call + * on resume to turn the backlight power on. We Enable backlight + * control on these systems, but do not register a backlight sysfs + * as brightness control does not work. */ { - .callback = video_disable_native_backlight, - .ident = "ThinkPad T420", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), - DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad T420"), - }, - }, - { - .callback = video_disable_native_backlight, - .ident = "ThinkPad T520", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), - DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad T520"), - }, - }, - { - .callback = video_disable_native_backlight, - .ident = "ThinkPad X201s", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), - DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad X201s"), - }, - }, - - /* The native backlight controls do not work on some older machines */ - { - /* https://bugs.freedesktop.org/show_bug.cgi?id=81515 */ - .callback = video_disable_native_backlight, - .ident = "HP ENVY 15 Notebook", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), - DMI_MATCH(DMI_PRODUCT_NAME, "HP ENVY 15 Notebook PC"), - }, - }, - - { - .callback = video_disable_native_backlight, - .ident = "SAMSUNG 870Z5E/880Z5E/680Z5E", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), - DMI_MATCH(DMI_PRODUCT_NAME, "870Z5E/880Z5E/680Z5E"), - }, - }, - { - .callback = video_disable_native_backlight, - .ident = "SAMSUNG 370R4E/370R4V/370R5E/3570RE/370R5V", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), - DMI_MATCH(DMI_PRODUCT_NAME, "370R4E/370R4V/370R5E/3570RE/370R5V"), - }, - }, - { - /* https://bugzilla.redhat.com/show_bug.cgi?id=1186097 */ - .callback = video_disable_native_backlight, - .ident = "SAMSUNG 3570R/370R/470R/450R/510R/4450RV", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), - DMI_MATCH(DMI_PRODUCT_NAME, "3570R/370R/470R/450R/510R/4450RV"), - }, - }, - { - /* https://bugzilla.redhat.com/show_bug.cgi?id=1094948 */ - .callback = video_disable_native_backlight, - .ident = "SAMSUNG 730U3E/740U3E", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), - DMI_MATCH(DMI_PRODUCT_NAME, "730U3E/740U3E"), - }, - }, - { - /* https://bugs.freedesktop.org/show_bug.cgi?id=87286 */ - .callback = video_disable_native_backlight, - .ident = "SAMSUNG 900X3C/900X3D/900X3E/900X4C/900X4D", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), - DMI_MATCH(DMI_PRODUCT_NAME, "900X3C/900X3D/900X3E/900X4C/900X4D"), - }, - }, - - { - /* https://bugzilla.redhat.com/show_bug.cgi?id=1163574 */ - .callback = video_disable_native_backlight, - .ident = "Dell XPS15 L521X", + /* https://bugs.freedesktop.org/show_bug.cgi?id=82634 */ + .callback = video_disable_backlight_sysfs_if, + .ident = "Toshiba Portege R830", .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), - DMI_MATCH(DMI_PRODUCT_NAME, "XPS L521X"), - }, - }, - - /* Non win8 machines which need native backlight nevertheless */ - { - /* https://bugzilla.redhat.com/show_bug.cgi?id=1187004 */ - .callback = video_enable_native_backlight, - .ident = "Lenovo Ideapad Z570", - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), - DMI_MATCH(DMI_PRODUCT_NAME, "102434U"), + DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), + DMI_MATCH(DMI_PRODUCT_NAME, "PORTEGE R830"), }, }, {} @@ -1382,7 +1258,7 @@ acpi_video_switch_brightness(struct work_struct *work) int result = -EINVAL; /* no warning message if acpi_backlight=vendor or a quirk is used */ - if (!acpi_video_verify_backlight_support()) + if (!device->backlight) return; if (!device->brightness) @@ -1657,8 +1533,9 @@ static int acpi_video_resume(struct notifier_block *nb, for (i = 0; i < video->attached_count; i++) { video_device = video->attached_array[i].bind_info; - if (video_device && video_device->backlight) - acpi_video_set_brightness(video_device->backlight); + if (video_device && video_device->brightness) + acpi_video_device_lcd_set_level(video_device, + video_device->brightness->curr); } return NOTIFY_OK; @@ -1707,6 +1584,10 @@ static void acpi_video_dev_register_backlight(struct acpi_video_device *device) result = acpi_video_init_brightness(device); if (result) return; + + if (disable_backlight_sysfs_if > 0) + return; + name = kasprintf(GFP_KERNEL, "acpi_video%d", count); if (!name) return; @@ -1729,8 +1610,10 @@ static void acpi_video_dev_register_backlight(struct acpi_video_device *device) &acpi_backlight_ops, &props); kfree(name); - if (IS_ERR(device->backlight)) + if (IS_ERR(device->backlight)) { + device->backlight = NULL; return; + } /* * Save current brightness level in case we have to restore it @@ -1787,7 +1670,7 @@ static int acpi_video_bus_register_backlight(struct acpi_video_bus *video) acpi_video_run_bcl_for_osi(video); - if (!acpi_video_verify_backlight_support()) + if (acpi_video_get_backlight_type() != acpi_backlight_video) return 0; mutex_lock(&video->device_list_lock); @@ -1931,56 +1814,6 @@ static void acpi_video_bus_remove_notify_handler(struct acpi_video_bus *video) video->input = NULL; } -static int acpi_video_backlight_notify(struct notifier_block *nb, - unsigned long val, void *bd) -{ - struct backlight_device *backlight = bd; - struct acpi_video_bus *video; - - /* acpi_video_verify_backlight_support only cares about raw devices */ - if (backlight->props.type != BACKLIGHT_RAW) - return NOTIFY_DONE; - - video = container_of(nb, struct acpi_video_bus, backlight_nb); - - switch (val) { - case BACKLIGHT_REGISTERED: - if (!acpi_video_verify_backlight_support()) - acpi_video_bus_unregister_backlight(video); - break; - case BACKLIGHT_UNREGISTERED: - acpi_video_bus_register_backlight(video); - break; - } - - return NOTIFY_OK; -} - -static int acpi_video_bus_add_backlight_notify_handler( - struct acpi_video_bus *video) -{ - int error; - - video->backlight_nb.notifier_call = acpi_video_backlight_notify; - video->backlight_nb.priority = 0; - error = backlight_register_notifier(&video->backlight_nb); - if (error == 0) - video->backlight_notifier_registered = true; - - return error; -} - -static int acpi_video_bus_remove_backlight_notify_handler( - struct acpi_video_bus *video) -{ - if (!video->backlight_notifier_registered) - return 0; - - video->backlight_notifier_registered = false; - - return backlight_unregister_notifier(&video->backlight_nb); -} - static int acpi_video_bus_put_devices(struct acpi_video_bus *video) { struct acpi_video_device *dev, *next; @@ -2062,7 +1895,6 @@ static int acpi_video_bus_add(struct acpi_device *device) acpi_video_bus_register_backlight(video); acpi_video_bus_add_notify_handler(video); - acpi_video_bus_add_backlight_notify_handler(video); return 0; @@ -2086,7 +1918,6 @@ static int acpi_video_bus_remove(struct acpi_device *device) video = acpi_driver_data(device); - acpi_video_bus_remove_backlight_notify_handler(video); acpi_video_bus_remove_notify_handler(video); acpi_video_bus_unregister_backlight(video); acpi_video_bus_put_devices(video); @@ -2134,22 +1965,25 @@ static int __init intel_opregion_present(void) int acpi_video_register(void) { - int ret; + int ret = 0; + mutex_lock(®ister_count_mutex); if (register_count) { /* * if the function of acpi_video_register is already called, * don't register the acpi_vide_bus again and return no error. */ - return 0; + goto leave; } mutex_init(&video_list_lock); INIT_LIST_HEAD(&video_bus_head); + dmi_check_system(video_dmi_table); + ret = acpi_bus_register_driver(&acpi_video_bus); if (ret) - return ret; + goto leave; /* * When the acpi_video_bus is loaded successfully, increase @@ -2157,24 +1991,20 @@ int acpi_video_register(void) */ register_count = 1; - return 0; +leave: + mutex_unlock(®ister_count_mutex); + return ret; } EXPORT_SYMBOL(acpi_video_register); void acpi_video_unregister(void) { - if (!register_count) { - /* - * If the acpi video bus is already unloaded, don't - * unload it again and return directly. - */ - return; + mutex_lock(®ister_count_mutex); + if (register_count) { + acpi_bus_unregister_driver(&acpi_video_bus); + register_count = 0; } - acpi_bus_unregister_driver(&acpi_video_bus); - - register_count = 0; - - return; + mutex_unlock(®ister_count_mutex); } EXPORT_SYMBOL(acpi_video_unregister); @@ -2182,15 +2012,15 @@ void acpi_video_unregister_backlight(void) { struct acpi_video_bus *video; - if (!register_count) - return; - - mutex_lock(&video_list_lock); - list_for_each_entry(video, &video_bus_head, entry) - acpi_video_bus_unregister_backlight(video); - mutex_unlock(&video_list_lock); + mutex_lock(®ister_count_mutex); + if (register_count) { + mutex_lock(&video_list_lock); + list_for_each_entry(video, &video_bus_head, entry) + acpi_video_bus_unregister_backlight(video); + mutex_unlock(&video_list_lock); + } + mutex_unlock(®ister_count_mutex); } -EXPORT_SYMBOL(acpi_video_unregister_backlight); /* * This is kind of nasty. Hardware using Intel chipsets may require @@ -2212,8 +2042,6 @@ static int __init acpi_video_init(void) if (acpi_disabled) return 0; - dmi_check_system(video_dmi_table); - if (intel_opregion_present()) return 0; @@ -2222,6 +2050,7 @@ static int __init acpi_video_init(void) static void __exit acpi_video_exit(void) { + acpi_video_detect_exit(); acpi_video_unregister(); return; diff --git a/drivers/acpi/acpica/acdebug.h b/drivers/acpi/acpica/acdebug.h index 4169bb87a996..43685dd36c77 100644 --- a/drivers/acpi/acpica/acdebug.h +++ b/drivers/acpi/acpica/acdebug.h @@ -231,7 +231,9 @@ void acpi_db_open_debug_file(char *name); acpi_status acpi_db_load_acpi_table(char *filename); acpi_status -acpi_db_get_table_from_file(char *filename, struct acpi_table_header **table); +acpi_db_get_table_from_file(char *filename, + struct acpi_table_header **table, + u8 must_be_aml_table); /* * dbhistry - debugger HISTORY command diff --git a/drivers/acpi/acpica/aclocal.h b/drivers/acpi/acpica/aclocal.h index 87b27521fcac..ffdb956391f6 100644 --- a/drivers/acpi/acpica/aclocal.h +++ b/drivers/acpi/acpica/aclocal.h @@ -352,11 +352,21 @@ struct acpi_package_info3 { u16 reserved; }; +struct acpi_package_info4 { + u8 type; + u8 object_type1; + u8 count1; + u8 sub_object_types; + u8 pkg_count; + u16 reserved; +}; + union acpi_predefined_info { struct acpi_name_info info; struct acpi_package_info ret_info; struct acpi_package_info2 ret_info2; struct acpi_package_info3 ret_info3; + struct acpi_package_info4 ret_info4; }; /* Reset to default packing */ @@ -1165,4 +1175,9 @@ struct ah_uuid { char *string; }; +struct ah_table { + char *signature; + char *description; +}; + #endif /* __ACLOCAL_H__ */ diff --git a/drivers/acpi/acpica/acparser.h b/drivers/acpi/acpica/acparser.h index 74a390c6db16..0cdd2fce493a 100644 --- a/drivers/acpi/acpica/acparser.h +++ b/drivers/acpi/acpica/acparser.h @@ -70,6 +70,9 @@ * *****************************************************************************/ +extern const u8 acpi_gbl_short_op_index[]; +extern const u8 acpi_gbl_long_op_index[]; + /* * psxface - Parser external interfaces */ diff --git a/drivers/acpi/acpica/acpredef.h b/drivers/acpi/acpica/acpredef.h index a972d11c97c9..b9474b529fcb 100644 --- a/drivers/acpi/acpica/acpredef.h +++ b/drivers/acpi/acpica/acpredef.h @@ -105,6 +105,11 @@ * count = 0 (optional) * (Used for _DLM) * + * ACPI_PTYPE2_VAR_VAR: Variable number of subpackages, each of either a + * constant or variable length. The subpackages are preceded by a + * constant number of objects. + * (Used for _LPI, _RDI) + * * ACPI_PTYPE2_UUID_PAIR: Each subpackage is preceded by a UUID Buffer. The UUID * defines the format of the package. Zero-length parent package is * allowed. @@ -123,7 +128,8 @@ enum acpi_return_package_types { ACPI_PTYPE2_MIN = 8, ACPI_PTYPE2_REV_FIXED = 9, ACPI_PTYPE2_FIX_VAR = 10, - ACPI_PTYPE2_UUID_PAIR = 11 + ACPI_PTYPE2_VAR_VAR = 11, + ACPI_PTYPE2_UUID_PAIR = 12 }; /* Support macros for users of the predefined info table */ @@ -172,7 +178,7 @@ enum acpi_return_package_types { * These are the names that can actually be evaluated via acpi_evaluate_object. * Not present in this table are the following: * - * 1) Predefined/Reserved names that are never evaluated via + * 1) Predefined/Reserved names that are not usually evaluated via * acpi_evaluate_object: * _Lxx and _Exx GPE methods * _Qxx EC methods @@ -361,6 +367,9 @@ const union acpi_predefined_info acpi_gbl_predefined_methods[] = { METHOD_RETURNS(ACPI_RTYPE_PACKAGE)}}, /* Fixed-length (4 Int) */ PACKAGE_INFO(ACPI_PTYPE1_FIXED, ACPI_RTYPE_INTEGER, 4, 0, 0, 0), + {{"_BTH", METHOD_1ARGS(ACPI_TYPE_INTEGER), /* ACPI 6.0 */ + METHOD_NO_RETURN_VALUE}}, + {{"_BTM", METHOD_1ARGS(ACPI_TYPE_INTEGER), METHOD_RETURNS(ACPI_RTYPE_INTEGER)}}, @@ -390,6 +399,9 @@ const union acpi_predefined_info acpi_gbl_predefined_methods[] = { PACKAGE_INFO(ACPI_PTYPE1_VAR, ACPI_RTYPE_INTEGER | ACPI_RTYPE_BUFFER, 0, 0, 0, 0), + {{"_CR3", METHOD_0ARGS, /* ACPI 6.0 */ + METHOD_RETURNS(ACPI_RTYPE_INTEGER)}}, + {{"_CRS", METHOD_0ARGS, METHOD_RETURNS(ACPI_RTYPE_BUFFER)}}, @@ -445,7 +457,7 @@ const union acpi_predefined_info acpi_gbl_predefined_methods[] = { {{"_DOS", METHOD_1ARGS(ACPI_TYPE_INTEGER), METHOD_NO_RETURN_VALUE}}, - {{"_DSD", METHOD_0ARGS, + {{"_DSD", METHOD_0ARGS, /* ACPI 6.0 */ METHOD_RETURNS(ACPI_RTYPE_PACKAGE)}}, /* Variable-length (Pkgs) each: 1 Buf, 1 Pkg */ PACKAGE_INFO(ACPI_PTYPE2_UUID_PAIR, ACPI_RTYPE_BUFFER, 1, ACPI_RTYPE_PACKAGE, 1, 0), @@ -604,6 +616,12 @@ const union acpi_predefined_info acpi_gbl_predefined_methods[] = { METHOD_RETURNS(ACPI_RTYPE_PACKAGE)}}, /* Variable-length (1 Int(rev), n Pkg (2 Int) */ PACKAGE_INFO(ACPI_PTYPE2_REV_FIXED, ACPI_RTYPE_INTEGER, 2, 0, 0, 0), + {{"_LPI", METHOD_0ARGS, /* ACPI 6.0 */ + METHOD_RETURNS(ACPI_RTYPE_PACKAGE)}}, /* Variable-length (3 Int, n Pkg (10 Int/Buf) */ + PACKAGE_INFO(ACPI_PTYPE2_VAR_VAR, ACPI_RTYPE_INTEGER, 3, + ACPI_RTYPE_INTEGER | ACPI_RTYPE_BUFFER | ACPI_RTYPE_STRING, + 10, 0), + {{"_MAT", METHOD_0ARGS, METHOD_RETURNS(ACPI_RTYPE_BUFFER)}}, @@ -624,6 +642,9 @@ const union acpi_predefined_info acpi_gbl_predefined_methods[] = { ACPI_TYPE_INTEGER), METHOD_RETURNS(ACPI_RTYPE_INTEGER)}}, + {{"_MTL", METHOD_0ARGS, /* ACPI 6.0 */ + METHOD_RETURNS(ACPI_RTYPE_INTEGER)}}, + {{"_NTT", METHOD_0ARGS, METHOD_RETURNS(ACPI_RTYPE_INTEGER)}}, @@ -716,6 +737,10 @@ const union acpi_predefined_info acpi_gbl_predefined_methods[] = { METHOD_RETURNS(ACPI_RTYPE_PACKAGE)}}, /* Variable-length (Refs) */ PACKAGE_INFO(ACPI_PTYPE1_VAR, ACPI_RTYPE_REFERENCE, 0, 0, 0, 0), + {{"_PRR", METHOD_0ARGS, /* ACPI 6.0 */ + METHOD_RETURNS(ACPI_RTYPE_PACKAGE)}}, /* Fixed-length (1 Ref) */ + PACKAGE_INFO(ACPI_PTYPE1_FIXED, ACPI_RTYPE_REFERENCE, 1, 0, 0, 0), + {{"_PRS", METHOD_0ARGS, METHOD_RETURNS(ACPI_RTYPE_BUFFER)}}, @@ -796,6 +821,11 @@ const union acpi_predefined_info acpi_gbl_predefined_methods[] = { {{"_PXM", METHOD_0ARGS, METHOD_RETURNS(ACPI_RTYPE_INTEGER)}}, + {{"_RDI", METHOD_0ARGS, /* ACPI 6.0 */ + METHOD_RETURNS(ACPI_RTYPE_PACKAGE)}}, /* Variable-length (1 Int, n Pkg (m Ref)) */ + PACKAGE_INFO(ACPI_PTYPE2_VAR_VAR, ACPI_RTYPE_INTEGER, 1, + ACPI_RTYPE_REFERENCE, 0, 0), + {{"_REG", METHOD_2ARGS(ACPI_TYPE_INTEGER, ACPI_TYPE_INTEGER), METHOD_NO_RETURN_VALUE}}, @@ -808,6 +838,9 @@ const union acpi_predefined_info acpi_gbl_predefined_methods[] = { {{"_ROM", METHOD_2ARGS(ACPI_TYPE_INTEGER, ACPI_TYPE_INTEGER), METHOD_RETURNS(ACPI_RTYPE_BUFFER)}}, + {{"_RST", METHOD_0ARGS, /* ACPI 6.0 */ + METHOD_NO_RETURN_VALUE}}, + {{"_RTV", METHOD_0ARGS, METHOD_RETURNS(ACPI_RTYPE_INTEGER)}}, @@ -935,6 +968,9 @@ const union acpi_predefined_info acpi_gbl_predefined_methods[] = { {{"_TDL", METHOD_0ARGS, METHOD_RETURNS(ACPI_RTYPE_INTEGER)}}, + {{"_TFP", METHOD_0ARGS, /* ACPI 6.0 */ + METHOD_RETURNS(ACPI_RTYPE_INTEGER)}}, + {{"_TIP", METHOD_1ARGS(ACPI_TYPE_INTEGER), METHOD_RETURNS(ACPI_RTYPE_INTEGER)}}, @@ -959,6 +995,9 @@ const union acpi_predefined_info acpi_gbl_predefined_methods[] = { METHOD_RETURNS(ACPI_RTYPE_PACKAGE)}}, /* Variable-length (Pkgs) each 5 Int with count */ PACKAGE_INFO(ACPI_PTYPE2_COUNT, ACPI_RTYPE_INTEGER, 5, 0, 0, 0), + {{"_TSN", METHOD_0ARGS, /* ACPI 6.0 */ + METHOD_RETURNS(ACPI_RTYPE_REFERENCE)}}, + {{"_TSP", METHOD_0ARGS, METHOD_RETURNS(ACPI_RTYPE_INTEGER)}}, diff --git a/drivers/acpi/acpica/acutils.h b/drivers/acpi/acpica/acutils.h index 2b3c5bd222f1..d49f5c7a20d9 100644 --- a/drivers/acpi/acpica/acutils.h +++ b/drivers/acpi/acpica/acutils.h @@ -251,7 +251,7 @@ extern const u8 _acpi_ctype[]; #define _ACPI_DI 0x04 /* '0'-'9' */ #define _ACPI_LO 0x02 /* 'a'-'z' */ #define _ACPI_PU 0x10 /* punctuation */ -#define _ACPI_SP 0x08 /* space */ +#define _ACPI_SP 0x08 /* space, tab, CR, LF, VT, FF */ #define _ACPI_UP 0x01 /* 'A'-'Z' */ #define _ACPI_XD 0x80 /* '0'-'9', 'A'-'F', 'a'-'f' */ diff --git a/drivers/acpi/acpica/dsmethod.c b/drivers/acpi/acpica/dsmethod.c index d72565a3c646..85bb951430d9 100644 --- a/drivers/acpi/acpica/dsmethod.c +++ b/drivers/acpi/acpica/dsmethod.c @@ -116,6 +116,7 @@ acpi_ds_auto_serialize_method(struct acpi_namespace_node *node, walk_state = acpi_ds_create_walk_state(node->owner_id, NULL, NULL, NULL); if (!walk_state) { + acpi_ps_free_op(op); return_ACPI_STATUS(AE_NO_MEMORY); } @@ -125,6 +126,7 @@ acpi_ds_auto_serialize_method(struct acpi_namespace_node *node, obj_desc->method.aml_length, NULL, 0); if (ACPI_FAILURE(status)) { acpi_ds_delete_walk_state(walk_state); + acpi_ps_free_op(op); return_ACPI_STATUS(status); } @@ -133,9 +135,6 @@ acpi_ds_auto_serialize_method(struct acpi_namespace_node *node, /* Parse the method, scan for creation of named objects */ status = acpi_ps_parse_aml(walk_state); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } acpi_ps_delete_parse_tree(op); return_ACPI_STATUS(status); diff --git a/drivers/acpi/acpica/hwpci.c b/drivers/acpi/acpica/hwpci.c index c5214dec4988..f785ea788356 100644 --- a/drivers/acpi/acpica/hwpci.c +++ b/drivers/acpi/acpica/hwpci.c @@ -123,7 +123,7 @@ acpi_hw_derive_pci_id(struct acpi_pci_id *pci_id, acpi_handle root_pci_device, acpi_handle pci_region) { acpi_status status; - struct acpi_pci_device *list_head = NULL; + struct acpi_pci_device *list_head; ACPI_FUNCTION_TRACE(hw_derive_pci_id); @@ -177,13 +177,13 @@ acpi_hw_build_pci_list(acpi_handle root_pci_device, acpi_handle parent_device; acpi_status status; struct acpi_pci_device *list_element; - struct acpi_pci_device *list_head = NULL; /* * Ascend namespace branch until the root_pci_device is reached, building * a list of device nodes. Loop will exit when either the PCI device is * found, or the root of the namespace is reached. */ + *return_list_head = NULL; current_device = pci_region; while (1) { status = acpi_get_parent(current_device, &parent_device); @@ -198,7 +198,6 @@ acpi_hw_build_pci_list(acpi_handle root_pci_device, /* Finished when we reach the PCI root device (PNP0A03 or PNP0A08) */ if (parent_device == root_pci_device) { - *return_list_head = list_head; return (AE_OK); } @@ -213,9 +212,9 @@ acpi_hw_build_pci_list(acpi_handle root_pci_device, /* Put new element at the head of the list */ - list_element->next = list_head; + list_element->next = *return_list_head; list_element->device = parent_device; - list_head = list_element; + *return_list_head = list_element; current_device = parent_device; } diff --git a/drivers/acpi/acpica/nsprepkg.c b/drivers/acpi/acpica/nsprepkg.c index 8b79958b7aca..9bb251932b45 100644 --- a/drivers/acpi/acpica/nsprepkg.c +++ b/drivers/acpi/acpica/nsprepkg.c @@ -316,6 +316,13 @@ acpi_ns_check_package(struct acpi_evaluate_info *info, acpi_ns_check_package_list(info, package, elements, count); break; + case ACPI_PTYPE2_VAR_VAR: + /* + * Returns a variable list of packages, each with a variable list + * of objects. + */ + break; + case ACPI_PTYPE2_UUID_PAIR: /* The package must contain pairs of (UUID + type) */ @@ -487,6 +494,12 @@ acpi_ns_check_package_list(struct acpi_evaluate_info *info, } break; + case ACPI_PTYPE2_VAR_VAR: + /* + * Each subpackage has a fixed or variable number of elements + */ + break; + case ACPI_PTYPE2_FIXED: /* Each subpackage has a fixed length */ diff --git a/drivers/acpi/acpica/nsrepair.c b/drivers/acpi/acpica/nsrepair.c index 151fcd95ba84..77d8103d0094 100644 --- a/drivers/acpi/acpica/nsrepair.c +++ b/drivers/acpi/acpica/nsrepair.c @@ -497,10 +497,10 @@ acpi_ns_remove_null_elements(struct acpi_evaluate_info *info, case ACPI_PTYPE2_MIN: case ACPI_PTYPE2_REV_FIXED: case ACPI_PTYPE2_FIX_VAR: - break; default: + case ACPI_PTYPE2_VAR_VAR: case ACPI_PTYPE1_FIXED: case ACPI_PTYPE1_OPTION: return; diff --git a/drivers/acpi/acpica/psopinfo.c b/drivers/acpi/acpica/psopinfo.c index 20e1a35169fc..58310907fa7b 100644 --- a/drivers/acpi/acpica/psopinfo.c +++ b/drivers/acpi/acpica/psopinfo.c @@ -50,9 +50,6 @@ #define _COMPONENT ACPI_PARSER ACPI_MODULE_NAME("psopinfo") -extern const u8 acpi_gbl_short_op_index[]; -extern const u8 acpi_gbl_long_op_index[]; - static const u8 acpi_gbl_argument_count[] = { 0, 1, 1, 1, 1, 2, 2, 2, 2, 3, 3, 6 }; diff --git a/drivers/acpi/acpica/utfileio.c b/drivers/acpi/acpica/utfileio.c index 7e1168be39fa..857af824337b 100644 --- a/drivers/acpi/acpica/utfileio.c +++ b/drivers/acpi/acpica/utfileio.c @@ -198,11 +198,8 @@ acpi_ut_read_table(FILE * fp, table_header.length, file_size); #ifdef ACPI_ASL_COMPILER - status = fl_check_for_ascii(fp, NULL, FALSE); - if (ACPI_SUCCESS(status)) { - acpi_os_printf - ("File appears to be ASCII only, must be binary\n"); - } + acpi_os_printf("File is corrupt or is ASCII text -- " + "it must be a binary file\n"); #endif return (AE_BAD_HEADER); } @@ -315,7 +312,7 @@ acpi_ut_read_table_from_file(char *filename, struct acpi_table_header ** table) /* Get the entire file */ fprintf(stderr, - "Loading Acpi table from file %10s - Length %.8u (%06X)\n", + "Reading ACPI table from file %10s - Length %.8u (0x%06X)\n", filename, file_size, file_size); status = acpi_ut_read_table(file, table, &table_length); diff --git a/drivers/acpi/acpica/uthex.c b/drivers/acpi/acpica/uthex.c index aa448278ba28..fda8b3def81c 100644 --- a/drivers/acpi/acpica/uthex.c +++ b/drivers/acpi/acpica/uthex.c @@ -75,9 +75,9 @@ char acpi_ut_hex_to_ascii_char(u64 integer, u32 position) /******************************************************************************* * - * FUNCTION: acpi_ut_hex_char_to_value + * FUNCTION: acpi_ut_ascii_char_to_hex * - * PARAMETERS: ascii_char - Hex character in Ascii + * PARAMETERS: hex_char - Hex character in Ascii * * RETURN: The binary value of the ascii/hex character * diff --git a/drivers/acpi/acpica/utxferror.c b/drivers/acpi/acpica/utxferror.c index 306e785f9418..98d578753101 100644 --- a/drivers/acpi/acpica/utxferror.c +++ b/drivers/acpi/acpica/utxferror.c @@ -107,9 +107,16 @@ acpi_exception(const char *module_name, va_list arg_list; ACPI_MSG_REDIRECT_BEGIN; - acpi_os_printf(ACPI_MSG_EXCEPTION "%s, ", - acpi_format_exception(status)); + /* For AE_OK, just print the message */ + + if (ACPI_SUCCESS(status)) { + acpi_os_printf(ACPI_MSG_EXCEPTION); + + } else { + acpi_os_printf(ACPI_MSG_EXCEPTION "%s, ", + acpi_format_exception(status)); + } va_start(arg_list, format); acpi_os_vprintf(format, arg_list); ACPI_MSG_SUFFIX; diff --git a/drivers/acpi/apei/ghes.c b/drivers/acpi/apei/ghes.c index e82d0976a5d0..2bfd53cbfe80 100644 --- a/drivers/acpi/apei/ghes.c +++ b/drivers/acpi/apei/ghes.c @@ -729,10 +729,10 @@ static struct llist_head ghes_estatus_llist; static struct irq_work ghes_proc_irq_work; /* - * NMI may be triggered on any CPU, so ghes_nmi_lock is used for - * mutual exclusion. + * NMI may be triggered on any CPU, so ghes_in_nmi is used for + * having only one concurrent reader. */ -static DEFINE_RAW_SPINLOCK(ghes_nmi_lock); +static atomic_t ghes_in_nmi = ATOMIC_INIT(0); static LIST_HEAD(ghes_nmi); @@ -797,73 +797,75 @@ static void ghes_print_queued_estatus(void) } } +/* Save estatus for further processing in IRQ context */ +static void __process_error(struct ghes *ghes) +{ +#ifdef CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG + u32 len, node_len; + struct ghes_estatus_node *estatus_node; + struct acpi_hest_generic_status *estatus; + + if (ghes_estatus_cached(ghes->estatus)) + return; + + len = cper_estatus_len(ghes->estatus); + node_len = GHES_ESTATUS_NODE_LEN(len); + + estatus_node = (void *)gen_pool_alloc(ghes_estatus_pool, node_len); + if (!estatus_node) + return; + + estatus_node->ghes = ghes; + estatus_node->generic = ghes->generic; + estatus = GHES_ESTATUS_FROM_NODE(estatus_node); + memcpy(estatus, ghes->estatus, len); + llist_add(&estatus_node->llnode, &ghes_estatus_llist); +#endif +} + +static void __ghes_panic(struct ghes *ghes) +{ + oops_begin(); + ghes_print_queued_estatus(); + __ghes_print_estatus(KERN_EMERG, ghes->generic, ghes->estatus); + + /* reboot to log the error! */ + if (panic_timeout == 0) + panic_timeout = ghes_panic_timeout; + panic("Fatal hardware error!"); +} + static int ghes_notify_nmi(unsigned int cmd, struct pt_regs *regs) { - struct ghes *ghes, *ghes_global = NULL; - int sev, sev_global = -1; - int ret = NMI_DONE; + struct ghes *ghes; + int sev, ret = NMI_DONE; + + if (!atomic_add_unless(&ghes_in_nmi, 1, 1)) + return ret; - raw_spin_lock(&ghes_nmi_lock); list_for_each_entry_rcu(ghes, &ghes_nmi, list) { if (ghes_read_estatus(ghes, 1)) { ghes_clear_estatus(ghes); continue; } - sev = ghes_severity(ghes->estatus->error_severity); - if (sev > sev_global) { - sev_global = sev; - ghes_global = ghes; - } - ret = NMI_HANDLED; - } - - if (ret == NMI_DONE) - goto out; - if (sev_global >= GHES_SEV_PANIC) { - oops_begin(); - ghes_print_queued_estatus(); - __ghes_print_estatus(KERN_EMERG, ghes_global->generic, - ghes_global->estatus); - /* reboot to log the error! */ - if (panic_timeout == 0) - panic_timeout = ghes_panic_timeout; - panic("Fatal hardware error!"); - } + sev = ghes_severity(ghes->estatus->error_severity); + if (sev >= GHES_SEV_PANIC) + __ghes_panic(ghes); - list_for_each_entry_rcu(ghes, &ghes_nmi, list) { -#ifdef CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG - u32 len, node_len; - struct ghes_estatus_node *estatus_node; - struct acpi_hest_generic_status *estatus; -#endif if (!(ghes->flags & GHES_TO_CLEAR)) continue; -#ifdef CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG - if (ghes_estatus_cached(ghes->estatus)) - goto next; - /* Save estatus for further processing in IRQ context */ - len = cper_estatus_len(ghes->estatus); - node_len = GHES_ESTATUS_NODE_LEN(len); - estatus_node = (void *)gen_pool_alloc(ghes_estatus_pool, - node_len); - if (estatus_node) { - estatus_node->ghes = ghes; - estatus_node->generic = ghes->generic; - estatus = GHES_ESTATUS_FROM_NODE(estatus_node); - memcpy(estatus, ghes->estatus, len); - llist_add(&estatus_node->llnode, &ghes_estatus_llist); - } -next: -#endif + + __process_error(ghes); ghes_clear_estatus(ghes); + + ret = NMI_HANDLED; } + #ifdef CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG irq_work_queue(&ghes_proc_irq_work); #endif - -out: - raw_spin_unlock(&ghes_nmi_lock); + atomic_dec(&ghes_in_nmi); return ret; } diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c index 63d43677f644..b3628cc01a53 100644 --- a/drivers/acpi/battery.c +++ b/drivers/acpi/battery.c @@ -70,6 +70,7 @@ MODULE_AUTHOR("Alexey Starikovskiy <astarikovskiy@suse.de>"); MODULE_DESCRIPTION("ACPI Battery Driver"); MODULE_LICENSE("GPL"); +static async_cookie_t async_cookie; static int battery_bix_broken_package; static int battery_notification_delay_ms; static unsigned int cache_time = 1000; @@ -338,14 +339,6 @@ static enum power_supply_property energy_battery_props[] = { POWER_SUPPLY_PROP_SERIAL_NUMBER, }; -#ifdef CONFIG_ACPI_PROCFS_POWER -inline char *acpi_battery_units(struct acpi_battery *battery) -{ - return (battery->power_unit == ACPI_BATTERY_POWER_UNIT_MA) ? - "mA" : "mW"; -} -#endif - /* -------------------------------------------------------------------------- Battery Management -------------------------------------------------------------------------- */ @@ -354,14 +347,14 @@ struct acpi_offsets { u8 mode; /* int or string? */ }; -static struct acpi_offsets state_offsets[] = { +static const struct acpi_offsets state_offsets[] = { {offsetof(struct acpi_battery, state), 0}, {offsetof(struct acpi_battery, rate_now), 0}, {offsetof(struct acpi_battery, capacity_now), 0}, {offsetof(struct acpi_battery, voltage_now), 0}, }; -static struct acpi_offsets info_offsets[] = { +static const struct acpi_offsets info_offsets[] = { {offsetof(struct acpi_battery, power_unit), 0}, {offsetof(struct acpi_battery, design_capacity), 0}, {offsetof(struct acpi_battery, full_charge_capacity), 0}, @@ -377,7 +370,7 @@ static struct acpi_offsets info_offsets[] = { {offsetof(struct acpi_battery, oem_info), 1}, }; -static struct acpi_offsets extended_info_offsets[] = { +static const struct acpi_offsets extended_info_offsets[] = { {offsetof(struct acpi_battery, revision), 0}, {offsetof(struct acpi_battery, power_unit), 0}, {offsetof(struct acpi_battery, design_capacity), 0}, @@ -402,7 +395,7 @@ static struct acpi_offsets extended_info_offsets[] = { static int extract_package(struct acpi_battery *battery, union acpi_object *package, - struct acpi_offsets *offsets, int num) + const struct acpi_offsets *offsets, int num) { int i; union acpi_object *element; @@ -792,6 +785,12 @@ static void acpi_battery_refresh(struct acpi_battery *battery) #ifdef CONFIG_ACPI_PROCFS_POWER static struct proc_dir_entry *acpi_battery_dir; +static const char *acpi_battery_units(const struct acpi_battery *battery) +{ + return (battery->power_unit == ACPI_BATTERY_POWER_UNIT_MA) ? + "mA" : "mW"; +} + static int acpi_battery_print_info(struct seq_file *seq, int result) { struct acpi_battery *battery = seq->private; @@ -1125,19 +1124,21 @@ static int battery_notify(struct notifier_block *nb, return 0; } -static int battery_bix_broken_package_quirk(const struct dmi_system_id *d) +static int __init +battery_bix_broken_package_quirk(const struct dmi_system_id *d) { battery_bix_broken_package = 1; return 0; } -static int battery_notification_delay_quirk(const struct dmi_system_id *d) +static int __init +battery_notification_delay_quirk(const struct dmi_system_id *d) { battery_notification_delay_ms = 1000; return 0; } -static struct dmi_system_id bat_dmi_table[] = { +static const struct dmi_system_id bat_dmi_table[] __initconst = { { .callback = battery_bix_broken_package_quirk, .ident = "NEC LZ750/LS", @@ -1292,33 +1293,34 @@ static struct acpi_driver acpi_battery_driver = { static void __init acpi_battery_init_async(void *unused, async_cookie_t cookie) { - if (acpi_disabled) - return; + int result; dmi_check_system(bat_dmi_table); - + #ifdef CONFIG_ACPI_PROCFS_POWER acpi_battery_dir = acpi_lock_battery_dir(); if (!acpi_battery_dir) return; #endif - if (acpi_bus_register_driver(&acpi_battery_driver) < 0) { + result = acpi_bus_register_driver(&acpi_battery_driver); #ifdef CONFIG_ACPI_PROCFS_POWER + if (result < 0) acpi_unlock_battery_dir(acpi_battery_dir); #endif - return; - } - return; } static int __init acpi_battery_init(void) { - async_schedule(acpi_battery_init_async, NULL); + if (acpi_disabled) + return -ENODEV; + + async_cookie = async_schedule(acpi_battery_init_async, NULL); return 0; } static void __exit acpi_battery_exit(void) { + async_synchronize_cookie(async_cookie); acpi_bus_unregister_driver(&acpi_battery_driver); #ifdef CONFIG_ACPI_PROCFS_POWER acpi_unlock_battery_dir(acpi_battery_dir); diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c index c412fdb28d34..513e7230e3d0 100644 --- a/drivers/acpi/bus.c +++ b/drivers/acpi/bus.c @@ -470,6 +470,16 @@ static int __init acpi_bus_init_irq(void) return 0; } +/** + * acpi_early_init - Initialize ACPICA and populate the ACPI namespace. + * + * The ACPI tables are accessible after this, but the handling of events has not + * been initialized and the global lock is not available yet, so AML should not + * be executed at this point. + * + * Doing this before switching the EFI runtime services to virtual mode allows + * the EfiBootServices memory to be freed slightly earlier on boot. + */ void __init acpi_early_init(void) { acpi_status status; @@ -533,26 +543,42 @@ void __init acpi_early_init(void) acpi_gbl_FADT.sci_interrupt = acpi_sci_override_gsi; } #endif + return; + + error0: + disable_acpi(); +} + +/** + * acpi_subsystem_init - Finalize the early initialization of ACPI. + * + * Switch over the platform to the ACPI mode (if possible), initialize the + * handling of ACPI events, install the interrupt and global lock handlers. + * + * Doing this too early is generally unsafe, but at the same time it needs to be + * done before all things that really depend on ACPI. The right spot appears to + * be before finalizing the EFI initialization. + */ +void __init acpi_subsystem_init(void) +{ + acpi_status status; + + if (acpi_disabled) + return; status = acpi_enable_subsystem(~ACPI_NO_ACPI_ENABLE); if (ACPI_FAILURE(status)) { printk(KERN_ERR PREFIX "Unable to enable ACPI\n"); - goto error0; + disable_acpi(); + } else { + /* + * If the system is using ACPI then we can be reasonably + * confident that any regulators are managed by the firmware + * so tell the regulator core it has everything it needs to + * know. + */ + regulator_has_full_constraints(); } - - /* - * If the system is using ACPI then we can be reasonably - * confident that any regulators are managed by the firmware - * so tell the regulator core it has everything it needs to - * know. - */ - regulator_has_full_constraints(); - - return; - - error0: - disable_acpi(); - return; } static int __init acpi_bus_init(void) diff --git a/drivers/acpi/device_pm.c b/drivers/acpi/device_pm.c index 735db11a9b00..717afcdb5f4a 100644 --- a/drivers/acpi/device_pm.c +++ b/drivers/acpi/device_pm.c @@ -98,17 +98,16 @@ int acpi_device_get_power(struct acpi_device *device, int *state) /* * The power resources settings may indicate a power state - * shallower than the actual power state of the device. + * shallower than the actual power state of the device, because + * the same power resources may be referenced by other devices. * - * Moreover, on systems predating ACPI 4.0, if the device - * doesn't depend on any power resources and _PSC returns 3, - * that means "power off". We need to maintain compatibility - * with those systems. + * For systems predating ACPI 4.0 we assume that D3hot is the + * deepest state that can be supported. */ if (psc > result && psc < ACPI_STATE_D3_COLD) result = psc; else if (result == ACPI_STATE_UNKNOWN) - result = psc > ACPI_STATE_D2 ? ACPI_STATE_D3_COLD : psc; + result = psc > ACPI_STATE_D2 ? ACPI_STATE_D3_HOT : psc; } /* @@ -153,8 +152,8 @@ static int acpi_dev_pm_explicit_set(struct acpi_device *adev, int state) */ int acpi_device_set_power(struct acpi_device *device, int state) { + int target_state = state; int result = 0; - bool cut_power = false; if (!device || !device->flags.power_manageable || (state < ACPI_STATE_D0) || (state > ACPI_STATE_D3_COLD)) @@ -169,11 +168,21 @@ int acpi_device_set_power(struct acpi_device *device, int state) return 0; } - if (!device->power.states[state].flags.valid) { + if (state == ACPI_STATE_D3_COLD) { + /* + * For transitions to D3cold we need to execute _PS3 and then + * possibly drop references to the power resources in use. + */ + state = ACPI_STATE_D3_HOT; + /* If _PR3 is not available, use D3hot as the target state. */ + if (!device->power.states[ACPI_STATE_D3_COLD].flags.valid) + target_state = state; + } else if (!device->power.states[state].flags.valid) { dev_warn(&device->dev, "Power state %s not supported\n", acpi_power_state_string(state)); return -ENODEV; } + if (!device->power.flags.ignore_parent && device->parent && (state < device->parent->power.state)) { dev_warn(&device->dev, @@ -183,39 +192,38 @@ int acpi_device_set_power(struct acpi_device *device, int state) return -ENODEV; } - /* For D3cold we should first transition into D3hot. */ - if (state == ACPI_STATE_D3_COLD - && device->power.states[ACPI_STATE_D3_COLD].flags.os_accessible) { - state = ACPI_STATE_D3_HOT; - cut_power = true; - } - - if (state < device->power.state && state != ACPI_STATE_D0 - && device->power.state >= ACPI_STATE_D3_HOT) { - dev_warn(&device->dev, - "Cannot transition to non-D0 state from D3\n"); - return -ENODEV; - } - /* * Transition Power * ---------------- - * In accordance with the ACPI specification first apply power (via - * power resources) and then evaluate _PSx. + * In accordance with ACPI 6, _PSx is executed before manipulating power + * resources, unless the target state is D0, in which case _PS0 is + * supposed to be executed after turning the power resources on. */ - if (device->power.flags.power_resources) { - result = acpi_power_transition(device, state); + if (state > ACPI_STATE_D0) { + /* + * According to ACPI 6, devices cannot go from lower-power + * (deeper) states to higher-power (shallower) states. + */ + if (state < device->power.state) { + dev_warn(&device->dev, "Cannot transition from %s to %s\n", + acpi_power_state_string(device->power.state), + acpi_power_state_string(state)); + return -ENODEV; + } + + result = acpi_dev_pm_explicit_set(device, state); if (result) goto end; - } - result = acpi_dev_pm_explicit_set(device, state); - if (result) - goto end; - if (cut_power) { - device->power.state = state; - state = ACPI_STATE_D3_COLD; - result = acpi_power_transition(device, state); + if (device->power.flags.power_resources) + result = acpi_power_transition(device, target_state); + } else { + if (device->power.flags.power_resources) { + result = acpi_power_transition(device, ACPI_STATE_D0); + if (result) + goto end; + } + result = acpi_dev_pm_explicit_set(device, ACPI_STATE_D0); } end: @@ -264,13 +272,24 @@ int acpi_bus_init_power(struct acpi_device *device) return result; if (state < ACPI_STATE_D3_COLD && device->power.flags.power_resources) { + /* Reference count the power resources. */ result = acpi_power_on_resources(device, state); if (result) return result; - result = acpi_dev_pm_explicit_set(device, state); - if (result) - return result; + if (state == ACPI_STATE_D0) { + /* + * If _PSC is not present and the state inferred from + * power resources appears to be D0, it still may be + * necessary to execute _PS0 at this point, because + * another device using the same power resources may + * have been put into D0 previously and that's why we + * see D0 here. + */ + result = acpi_dev_pm_explicit_set(device, state); + if (result) + return result; + } } else if (state == ACPI_STATE_UNKNOWN) { /* * No power resources and missing _PSC? Cross fingers and make @@ -603,12 +622,12 @@ int acpi_pm_device_sleep_state(struct device *dev, int *d_min_p, int d_max_in) if (d_max_in < ACPI_STATE_D0 || d_max_in > ACPI_STATE_D3_COLD) return -EINVAL; - if (d_max_in > ACPI_STATE_D3_HOT) { + if (d_max_in > ACPI_STATE_D2) { enum pm_qos_flags_status stat; stat = dev_pm_qos_flags(dev, PM_QOS_FLAG_NO_POWER_OFF); if (stat == PM_QOS_FLAGS_ALL) - d_max_in = ACPI_STATE_D3_HOT; + d_max_in = ACPI_STATE_D2; } adev = ACPI_COMPANION(dev); @@ -953,6 +972,7 @@ EXPORT_SYMBOL_GPL(acpi_subsys_prepare); */ void acpi_subsys_complete(struct device *dev) { + pm_generic_complete(dev); /* * If the device had been runtime-suspended before the system went into * the sleep state it is going out of and it has never been resumed till diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index 5e8fed448850..9d4761d2f6b7 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -59,6 +59,38 @@ #define ACPI_EC_FLAG_BURST 0x10 /* burst mode */ #define ACPI_EC_FLAG_SCI 0x20 /* EC-SCI occurred */ +/* + * The SCI_EVT clearing timing is not defined by the ACPI specification. + * This leads to lots of practical timing issues for the host EC driver. + * The following variations are defined (from the target EC firmware's + * perspective): + * STATUS: After indicating SCI_EVT edge triggered IRQ to the host, the + * target can clear SCI_EVT at any time so long as the host can see + * the indication by reading the status register (EC_SC). So the + * host should re-check SCI_EVT after the first time the SCI_EVT + * indication is seen, which is the same time the query request + * (QR_EC) is written to the command register (EC_CMD). SCI_EVT set + * at any later time could indicate another event. Normally such + * kind of EC firmware has implemented an event queue and will + * return 0x00 to indicate "no outstanding event". + * QUERY: After seeing the query request (QR_EC) written to the command + * register (EC_CMD) by the host and having prepared the responding + * event value in the data register (EC_DATA), the target can safely + * clear SCI_EVT because the target can confirm that the current + * event is being handled by the host. The host then should check + * SCI_EVT right after reading the event response from the data + * register (EC_DATA). + * EVENT: After seeing the event response read from the data register + * (EC_DATA) by the host, the target can clear SCI_EVT. As the + * target requires time to notice the change in the data register + * (EC_DATA), the host may be required to wait additional guarding + * time before checking the SCI_EVT again. Such guarding may not be + * necessary if the host is notified via another IRQ. + */ +#define ACPI_EC_EVT_TIMING_STATUS 0x00 +#define ACPI_EC_EVT_TIMING_QUERY 0x01 +#define ACPI_EC_EVT_TIMING_EVENT 0x02 + /* EC commands */ enum ec_command { ACPI_EC_COMMAND_READ = 0x80, @@ -70,13 +102,13 @@ enum ec_command { #define ACPI_EC_DELAY 500 /* Wait 500ms max. during EC ops */ #define ACPI_EC_UDELAY_GLK 1000 /* Wait 1ms max. to get global lock */ -#define ACPI_EC_MSI_UDELAY 550 /* Wait 550us for MSI EC */ -#define ACPI_EC_UDELAY_POLL 1000 /* Wait 1ms for EC transaction polling */ +#define ACPI_EC_UDELAY_POLL 550 /* Wait 1ms for EC transaction polling */ #define ACPI_EC_CLEAR_MAX 100 /* Maximum number of events to query * when trying to clear the EC */ enum { EC_FLAGS_QUERY_PENDING, /* Query is pending */ + EC_FLAGS_QUERY_GUARDING, /* Guard for SCI_EVT check */ EC_FLAGS_HANDLERS_INSTALLED, /* Handlers for GPE and * OpReg are installed */ EC_FLAGS_STARTED, /* Driver is started */ @@ -93,6 +125,16 @@ static unsigned int ec_delay __read_mostly = ACPI_EC_DELAY; module_param(ec_delay, uint, 0644); MODULE_PARM_DESC(ec_delay, "Timeout(ms) waited until an EC command completes"); +static bool ec_busy_polling __read_mostly; +module_param(ec_busy_polling, bool, 0644); +MODULE_PARM_DESC(ec_busy_polling, "Use busy polling to advance EC transaction"); + +static unsigned int ec_polling_guard __read_mostly = ACPI_EC_UDELAY_POLL; +module_param(ec_polling_guard, uint, 0644); +MODULE_PARM_DESC(ec_polling_guard, "Guard time(us) between EC accesses in polling modes"); + +static unsigned int ec_event_clearing __read_mostly = ACPI_EC_EVT_TIMING_QUERY; + /* * If the number of false interrupts per one transaction exceeds * this threshold, will think there is a GPE storm happened and @@ -121,7 +163,6 @@ struct transaction { u8 wlen; u8 rlen; u8 flags; - unsigned long timestamp; }; static int acpi_ec_query(struct acpi_ec *ec, u8 *data); @@ -130,7 +171,6 @@ static void advance_transaction(struct acpi_ec *ec); struct acpi_ec *boot_ec, *first_ec; EXPORT_SYMBOL(first_ec); -static int EC_FLAGS_MSI; /* Out-of-spec MSI controller */ static int EC_FLAGS_VALIDATE_ECDT; /* ASUStec ECDTs need to be validated */ static int EC_FLAGS_SKIP_DSDT_SCAN; /* Not all BIOS survive early DSDT scan */ static int EC_FLAGS_CLEAR_ON_RESUME; /* Needs acpi_ec_clear() on boot/resume */ @@ -218,7 +258,7 @@ static inline u8 acpi_ec_read_data(struct acpi_ec *ec) { u8 x = inb(ec->data_addr); - ec->curr->timestamp = jiffies; + ec->timestamp = jiffies; ec_dbg_raw("EC_DATA(R) = 0x%2.2x", x); return x; } @@ -227,14 +267,14 @@ static inline void acpi_ec_write_cmd(struct acpi_ec *ec, u8 command) { ec_dbg_raw("EC_SC(W) = 0x%2.2x", command); outb(command, ec->command_addr); - ec->curr->timestamp = jiffies; + ec->timestamp = jiffies; } static inline void acpi_ec_write_data(struct acpi_ec *ec, u8 data) { ec_dbg_raw("EC_DATA(W) = 0x%2.2x", data); outb(data, ec->data_addr); - ec->curr->timestamp = jiffies; + ec->timestamp = jiffies; } #ifdef DEBUG @@ -267,7 +307,7 @@ static inline bool acpi_ec_is_gpe_raised(struct acpi_ec *ec) acpi_event_status gpe_status = 0; (void)acpi_get_gpe_status(NULL, ec->gpe, &gpe_status); - return (gpe_status & ACPI_EVENT_FLAG_SET) ? true : false; + return (gpe_status & ACPI_EVENT_FLAG_STATUS_SET) ? true : false; } static inline void acpi_ec_enable_gpe(struct acpi_ec *ec, bool open) @@ -379,19 +419,49 @@ static bool acpi_ec_submit_flushable_request(struct acpi_ec *ec) static void acpi_ec_submit_query(struct acpi_ec *ec) { if (!test_and_set_bit(EC_FLAGS_QUERY_PENDING, &ec->flags)) { - ec_dbg_req("Event started"); + ec_dbg_evt("Command(%s) submitted/blocked", + acpi_ec_cmd_string(ACPI_EC_COMMAND_QUERY)); + ec->nr_pending_queries++; schedule_work(&ec->work); } } static void acpi_ec_complete_query(struct acpi_ec *ec) { - if (ec->curr->command == ACPI_EC_COMMAND_QUERY) { + if (test_bit(EC_FLAGS_QUERY_PENDING, &ec->flags)) { clear_bit(EC_FLAGS_QUERY_PENDING, &ec->flags); - ec_dbg_req("Event stopped"); + ec_dbg_evt("Command(%s) unblocked", + acpi_ec_cmd_string(ACPI_EC_COMMAND_QUERY)); } } +static bool acpi_ec_guard_event(struct acpi_ec *ec) +{ + if (ec_event_clearing == ACPI_EC_EVT_TIMING_STATUS || + ec_event_clearing == ACPI_EC_EVT_TIMING_QUERY || + !test_bit(EC_FLAGS_QUERY_PENDING, &ec->flags) || + (ec->curr && ec->curr->command == ACPI_EC_COMMAND_QUERY)) + return false; + + /* + * Postpone the query submission to allow the firmware to proceed, + * we shouldn't check SCI_EVT before the firmware reflagging it. + */ + return true; +} + +static int ec_transaction_polled(struct acpi_ec *ec) +{ + unsigned long flags; + int ret = 0; + + spin_lock_irqsave(&ec->lock, flags); + if (ec->curr && (ec->curr->flags & ACPI_EC_COMMAND_POLL)) + ret = 1; + spin_unlock_irqrestore(&ec->lock, flags); + return ret; +} + static int ec_transaction_completed(struct acpi_ec *ec) { unsigned long flags; @@ -404,6 +474,22 @@ static int ec_transaction_completed(struct acpi_ec *ec) return ret; } +static inline void ec_transaction_transition(struct acpi_ec *ec, unsigned long flag) +{ + ec->curr->flags |= flag; + if (ec->curr->command == ACPI_EC_COMMAND_QUERY) { + if (ec_event_clearing == ACPI_EC_EVT_TIMING_STATUS && + flag == ACPI_EC_COMMAND_POLL) + acpi_ec_complete_query(ec); + if (ec_event_clearing == ACPI_EC_EVT_TIMING_QUERY && + flag == ACPI_EC_COMMAND_COMPLETE) + acpi_ec_complete_query(ec); + if (ec_event_clearing == ACPI_EC_EVT_TIMING_EVENT && + flag == ACPI_EC_COMMAND_COMPLETE) + set_bit(EC_FLAGS_QUERY_GUARDING, &ec->flags); + } +} + static void advance_transaction(struct acpi_ec *ec) { struct transaction *t; @@ -420,6 +506,18 @@ static void advance_transaction(struct acpi_ec *ec) acpi_ec_clear_gpe(ec); status = acpi_ec_read_status(ec); t = ec->curr; + /* + * Another IRQ or a guarded polling mode advancement is detected, + * the next QR_EC submission is then allowed. + */ + if (!t || !(t->flags & ACPI_EC_COMMAND_POLL)) { + if (ec_event_clearing == ACPI_EC_EVT_TIMING_EVENT && + (!ec->nr_pending_queries || + test_bit(EC_FLAGS_QUERY_GUARDING, &ec->flags))) { + clear_bit(EC_FLAGS_QUERY_GUARDING, &ec->flags); + acpi_ec_complete_query(ec); + } + } if (!t) goto err; if (t->flags & ACPI_EC_COMMAND_POLL) { @@ -432,17 +530,17 @@ static void advance_transaction(struct acpi_ec *ec) if ((status & ACPI_EC_FLAG_OBF) == 1) { t->rdata[t->ri++] = acpi_ec_read_data(ec); if (t->rlen == t->ri) { - t->flags |= ACPI_EC_COMMAND_COMPLETE; + ec_transaction_transition(ec, ACPI_EC_COMMAND_COMPLETE); if (t->command == ACPI_EC_COMMAND_QUERY) - ec_dbg_req("Command(%s) hardware completion", - acpi_ec_cmd_string(t->command)); + ec_dbg_evt("Command(%s) completed by hardware", + acpi_ec_cmd_string(ACPI_EC_COMMAND_QUERY)); wakeup = true; } } else goto err; } else if (t->wlen == t->wi && (status & ACPI_EC_FLAG_IBF) == 0) { - t->flags |= ACPI_EC_COMMAND_COMPLETE; + ec_transaction_transition(ec, ACPI_EC_COMMAND_COMPLETE); wakeup = true; } goto out; @@ -450,17 +548,15 @@ static void advance_transaction(struct acpi_ec *ec) if (EC_FLAGS_QUERY_HANDSHAKE && !(status & ACPI_EC_FLAG_SCI) && (t->command == ACPI_EC_COMMAND_QUERY)) { - t->flags |= ACPI_EC_COMMAND_POLL; - acpi_ec_complete_query(ec); + ec_transaction_transition(ec, ACPI_EC_COMMAND_POLL); t->rdata[t->ri++] = 0x00; - t->flags |= ACPI_EC_COMMAND_COMPLETE; - ec_dbg_req("Command(%s) software completion", - acpi_ec_cmd_string(t->command)); + ec_transaction_transition(ec, ACPI_EC_COMMAND_COMPLETE); + ec_dbg_evt("Command(%s) completed by software", + acpi_ec_cmd_string(ACPI_EC_COMMAND_QUERY)); wakeup = true; } else if ((status & ACPI_EC_FLAG_IBF) == 0) { acpi_ec_write_cmd(ec, t->command); - t->flags |= ACPI_EC_COMMAND_POLL; - acpi_ec_complete_query(ec); + ec_transaction_transition(ec, ACPI_EC_COMMAND_POLL); } else goto err; goto out; @@ -490,8 +586,39 @@ static void start_transaction(struct acpi_ec *ec) { ec->curr->irq_count = ec->curr->wi = ec->curr->ri = 0; ec->curr->flags = 0; - ec->curr->timestamp = jiffies; - advance_transaction(ec); +} + +static int ec_guard(struct acpi_ec *ec) +{ + unsigned long guard = usecs_to_jiffies(ec_polling_guard); + unsigned long timeout = ec->timestamp + guard; + + do { + if (ec_busy_polling) { + /* Perform busy polling */ + if (ec_transaction_completed(ec)) + return 0; + udelay(jiffies_to_usecs(guard)); + } else { + /* + * Perform wait polling + * + * For SCI_EVT clearing timing of "event", + * performing guarding before re-checking the + * SCI_EVT. Otherwise, such guarding is not needed + * due to the old practices. + */ + if (!ec_transaction_polled(ec) && + !acpi_ec_guard_event(ec)) + break; + if (wait_event_timeout(ec->wait, + ec_transaction_completed(ec), + guard)) + return 0; + } + /* Guard the register accesses for the polling modes */ + } while (time_before(jiffies, timeout)); + return -ETIME; } static int ec_poll(struct acpi_ec *ec) @@ -502,25 +629,11 @@ static int ec_poll(struct acpi_ec *ec) while (repeat--) { unsigned long delay = jiffies + msecs_to_jiffies(ec_delay); - unsigned long usecs = ACPI_EC_UDELAY_POLL; do { - /* don't sleep with disabled interrupts */ - if (EC_FLAGS_MSI || irqs_disabled()) { - usecs = ACPI_EC_MSI_UDELAY; - udelay(usecs); - if (ec_transaction_completed(ec)) - return 0; - } else { - if (wait_event_timeout(ec->wait, - ec_transaction_completed(ec), - usecs_to_jiffies(usecs))) - return 0; - } + if (!ec_guard(ec)) + return 0; spin_lock_irqsave(&ec->lock, flags); - if (time_after(jiffies, - ec->curr->timestamp + - usecs_to_jiffies(usecs))) - advance_transaction(ec); + advance_transaction(ec); spin_unlock_irqrestore(&ec->lock, flags); } while (time_before(jiffies, delay)); pr_debug("controller reset, restart transaction\n"); @@ -537,8 +650,6 @@ static int acpi_ec_transaction_unlocked(struct acpi_ec *ec, unsigned long tmp; int ret = 0; - if (EC_FLAGS_MSI) - udelay(ACPI_EC_MSI_UDELAY); /* start transaction */ spin_lock_irqsave(&ec->lock, tmp); /* Enable GPE for command processing (IBF=0/OBF=1) */ @@ -552,7 +663,9 @@ static int acpi_ec_transaction_unlocked(struct acpi_ec *ec, ec_dbg_req("Command(%s) started", acpi_ec_cmd_string(t->command)); start_transaction(ec); spin_unlock_irqrestore(&ec->lock, tmp); + ret = ec_poll(ec); + spin_lock_irqsave(&ec->lock, tmp); if (t->irq_count == ec_storm_threshold) acpi_ec_clear_storm(ec, EC_FLAGS_COMMAND_STORM); @@ -575,6 +688,7 @@ static int acpi_ec_transaction(struct acpi_ec *ec, struct transaction *t) return -EINVAL; if (t->rdata) memset(t->rdata, 0, t->rlen); + mutex_lock(&ec->mutex); if (ec->global_lock) { status = acpi_acquire_global_lock(ACPI_EC_UDELAY_GLK, &glk); @@ -586,8 +700,6 @@ static int acpi_ec_transaction(struct acpi_ec *ec, struct transaction *t) status = acpi_ec_transaction_unlocked(ec, t); - if (test_bit(EC_FLAGS_COMMAND_STORM, &ec->flags)) - msleep(1); if (ec->global_lock) acpi_release_global_lock(glk); unlock: @@ -923,11 +1035,54 @@ static int acpi_ec_query(struct acpi_ec *ec, u8 *data) return result; } -static void acpi_ec_gpe_poller(struct work_struct *work) +static void acpi_ec_check_event(struct acpi_ec *ec) { + unsigned long flags; + + if (ec_event_clearing == ACPI_EC_EVT_TIMING_EVENT) { + if (ec_guard(ec)) { + spin_lock_irqsave(&ec->lock, flags); + /* + * Take care of the SCI_EVT unless no one else is + * taking care of it. + */ + if (!ec->curr) + advance_transaction(ec); + spin_unlock_irqrestore(&ec->lock, flags); + } + } +} + +static void acpi_ec_event_handler(struct work_struct *work) +{ + unsigned long flags; struct acpi_ec *ec = container_of(work, struct acpi_ec, work); - acpi_ec_query(ec, NULL); + ec_dbg_evt("Event started"); + + spin_lock_irqsave(&ec->lock, flags); + while (ec->nr_pending_queries) { + spin_unlock_irqrestore(&ec->lock, flags); + (void)acpi_ec_query(ec, NULL); + spin_lock_irqsave(&ec->lock, flags); + ec->nr_pending_queries--; + /* + * Before exit, make sure that this work item can be + * scheduled again. There might be QR_EC failures, leaving + * EC_FLAGS_QUERY_PENDING uncleared and preventing this work + * item from being scheduled again. + */ + if (!ec->nr_pending_queries) { + if (ec_event_clearing == ACPI_EC_EVT_TIMING_STATUS || + ec_event_clearing == ACPI_EC_EVT_TIMING_QUERY) + acpi_ec_complete_query(ec); + } + } + spin_unlock_irqrestore(&ec->lock, flags); + + ec_dbg_evt("Event stopped"); + + acpi_ec_check_event(ec); } static u32 acpi_ec_gpe_handler(acpi_handle gpe_device, @@ -961,7 +1116,7 @@ acpi_ec_space_handler(u32 function, acpi_physical_address address, if (function != ACPI_READ && function != ACPI_WRITE) return AE_BAD_PARAMETER; - if (EC_FLAGS_MSI || bits > 8) + if (ec_busy_polling || bits > 8) acpi_ec_burst_enable(ec); for (i = 0; i < bytes; ++i, ++address, ++value) @@ -969,7 +1124,7 @@ acpi_ec_space_handler(u32 function, acpi_physical_address address, acpi_ec_read(ec, address, value) : acpi_ec_write(ec, address, *value); - if (EC_FLAGS_MSI || bits > 8) + if (ec_busy_polling || bits > 8) acpi_ec_burst_disable(ec); switch (result) { @@ -1002,7 +1157,8 @@ static struct acpi_ec *make_acpi_ec(void) init_waitqueue_head(&ec->wait); INIT_LIST_HEAD(&ec->list); spin_lock_init(&ec->lock); - INIT_WORK(&ec->work, acpi_ec_gpe_poller); + INIT_WORK(&ec->work, acpi_ec_event_handler); + ec->timestamp = jiffies; return ec; } @@ -1237,30 +1393,13 @@ static int ec_validate_ecdt(const struct dmi_system_id *id) return 0; } -/* MSI EC needs special treatment, enable it */ -static int ec_flag_msi(const struct dmi_system_id *id) -{ - pr_debug("Detected MSI hardware, enabling workarounds.\n"); - EC_FLAGS_MSI = 1; - EC_FLAGS_VALIDATE_ECDT = 1; - return 0; -} - -/* - * Clevo M720 notebook actually works ok with IRQ mode, if we lifted - * the GPE storm threshold back to 20 - */ -static int ec_enlarge_storm_threshold(const struct dmi_system_id *id) -{ - pr_debug("Setting the EC GPE storm threshold to 20\n"); - ec_storm_threshold = 20; - return 0; -} - +#if 0 /* - * Acer EC firmware refuses to respond QR_EC when SCI_EVT is not set, for - * which case, we complete the QR_EC without issuing it to the firmware. - * https://bugzilla.kernel.org/show_bug.cgi?id=86211 + * Some EC firmware variations refuses to respond QR_EC when SCI_EVT is not + * set, for which case, we complete the QR_EC without issuing it to the + * firmware. + * https://bugzilla.kernel.org/show_bug.cgi?id=82611 + * https://bugzilla.kernel.org/show_bug.cgi?id=97381 */ static int ec_flag_query_handshake(const struct dmi_system_id *id) { @@ -1268,6 +1407,7 @@ static int ec_flag_query_handshake(const struct dmi_system_id *id) EC_FLAGS_QUERY_HANDSHAKE = 1; return 0; } +#endif /* * On some hardware it is necessary to clear events accumulated by the EC during @@ -1290,6 +1430,7 @@ static int ec_clear_on_resume(const struct dmi_system_id *id) { pr_debug("Detected system needing EC poll on resume.\n"); EC_FLAGS_CLEAR_ON_RESUME = 1; + ec_event_clearing = ACPI_EC_EVT_TIMING_STATUS; return 0; } @@ -1299,29 +1440,9 @@ static struct dmi_system_id ec_dmi_table[] __initdata = { DMI_MATCH(DMI_BIOS_VENDOR, "COMPAL"), DMI_MATCH(DMI_BOARD_NAME, "JFL92") }, NULL}, { - ec_flag_msi, "MSI hardware", { - DMI_MATCH(DMI_BIOS_VENDOR, "Micro-Star")}, NULL}, - { - ec_flag_msi, "MSI hardware", { - DMI_MATCH(DMI_SYS_VENDOR, "Micro-Star")}, NULL}, - { - ec_flag_msi, "MSI hardware", { - DMI_MATCH(DMI_CHASSIS_VENDOR, "MICRO-Star")}, NULL}, - { - ec_flag_msi, "MSI hardware", { - DMI_MATCH(DMI_CHASSIS_VENDOR, "MICRO-STAR")}, NULL}, - { - ec_flag_msi, "Quanta hardware", { - DMI_MATCH(DMI_SYS_VENDOR, "Quanta"), - DMI_MATCH(DMI_PRODUCT_NAME, "TW8/SW8/DW8"),}, NULL}, - { - ec_flag_msi, "Quanta hardware", { - DMI_MATCH(DMI_SYS_VENDOR, "Quanta"), - DMI_MATCH(DMI_PRODUCT_NAME, "TW9/SW9"),}, NULL}, - { - ec_flag_msi, "Clevo W350etq", { - DMI_MATCH(DMI_SYS_VENDOR, "CLEVO CO."), - DMI_MATCH(DMI_PRODUCT_NAME, "W35_37ET"),}, NULL}, + ec_validate_ecdt, "MSI MS-171F", { + DMI_MATCH(DMI_SYS_VENDOR, "Micro-Star"), + DMI_MATCH(DMI_PRODUCT_NAME, "MS-171F"),}, NULL}, { ec_validate_ecdt, "ASUS hardware", { DMI_MATCH(DMI_BIOS_VENDOR, "ASUS") }, NULL}, @@ -1329,10 +1450,6 @@ static struct dmi_system_id ec_dmi_table[] __initdata = { ec_validate_ecdt, "ASUS hardware", { DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer Inc.") }, NULL}, { - ec_enlarge_storm_threshold, "CLEVO hardware", { - DMI_MATCH(DMI_SYS_VENDOR, "CLEVO Co."), - DMI_MATCH(DMI_PRODUCT_NAME, "M720T/M730T"),}, NULL}, - { ec_skip_dsdt_scan, "HP Folio 13", { DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), DMI_MATCH(DMI_PRODUCT_NAME, "HP Folio 13"),}, NULL}, @@ -1343,9 +1460,6 @@ static struct dmi_system_id ec_dmi_table[] __initdata = { { ec_clear_on_resume, "Samsung hardware", { DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD.")}, NULL}, - { - ec_flag_query_handshake, "Acer hardware", { - DMI_MATCH(DMI_SYS_VENDOR, "Acer"), }, NULL}, {}, }; @@ -1427,6 +1541,43 @@ error: return -ENODEV; } +static int param_set_event_clearing(const char *val, struct kernel_param *kp) +{ + int result = 0; + + if (!strncmp(val, "status", sizeof("status") - 1)) { + ec_event_clearing = ACPI_EC_EVT_TIMING_STATUS; + pr_info("Assuming SCI_EVT clearing on EC_SC accesses\n"); + } else if (!strncmp(val, "query", sizeof("query") - 1)) { + ec_event_clearing = ACPI_EC_EVT_TIMING_QUERY; + pr_info("Assuming SCI_EVT clearing on QR_EC writes\n"); + } else if (!strncmp(val, "event", sizeof("event") - 1)) { + ec_event_clearing = ACPI_EC_EVT_TIMING_EVENT; + pr_info("Assuming SCI_EVT clearing on event reads\n"); + } else + result = -EINVAL; + return result; +} + +static int param_get_event_clearing(char *buffer, struct kernel_param *kp) +{ + switch (ec_event_clearing) { + case ACPI_EC_EVT_TIMING_STATUS: + return sprintf(buffer, "status"); + case ACPI_EC_EVT_TIMING_QUERY: + return sprintf(buffer, "query"); + case ACPI_EC_EVT_TIMING_EVENT: + return sprintf(buffer, "event"); + default: + return sprintf(buffer, "invalid"); + } + return 0; +} + +module_param_call(ec_event_clearing, param_set_event_clearing, param_get_event_clearing, + NULL, 0644); +MODULE_PARM_DESC(ec_event_clearing, "Assumed SCI_EVT clearing timing"); + static struct acpi_driver acpi_ec_driver = { .name = "ec", .class = ACPI_EC_CLASS, diff --git a/drivers/acpi/fan.c b/drivers/acpi/fan.c index 7a36f02598a6..bea0bbaafa97 100644 --- a/drivers/acpi/fan.c +++ b/drivers/acpi/fan.c @@ -158,8 +158,9 @@ static int fan_get_state(struct acpi_device *device, unsigned long *state) if (result) return result; - *state = (acpi_state == ACPI_STATE_D3_COLD ? 0 : - (acpi_state == ACPI_STATE_D0 ? 1 : -1)); + *state = acpi_state == ACPI_STATE_D3_COLD + || acpi_state == ACPI_STATE_D3_HOT ? + 0 : (acpi_state == ACPI_STATE_D0 ? 1 : -1); return 0; } diff --git a/drivers/acpi/hed.c b/drivers/acpi/hed.c index aafe3ca829c2..a322710b5ba4 100644 --- a/drivers/acpi/hed.c +++ b/drivers/acpi/hed.c @@ -27,7 +27,7 @@ #include <linux/acpi.h> #include <acpi/hed.h> -static struct acpi_device_id acpi_hed_ids[] = { +static const struct acpi_device_id acpi_hed_ids[] = { {"PNP0C33", 0}, {"", 0}, }; diff --git a/drivers/acpi/internal.h b/drivers/acpi/internal.h index d93628c65661..787c629bc9b4 100644 --- a/drivers/acpi/internal.h +++ b/drivers/acpi/internal.h @@ -138,6 +138,8 @@ struct acpi_ec { struct transaction *curr; spinlock_t lock; struct work_struct work; + unsigned long timestamp; + unsigned long nr_pending_queries; }; extern struct acpi_ec *first_ec; @@ -182,13 +184,6 @@ static inline void suspend_nvs_restore(void) {} #endif /*-------------------------------------------------------------------------- - Video - -------------------------------------------------------------------------- */ -#if defined(CONFIG_ACPI_VIDEO) || defined(CONFIG_ACPI_VIDEO_MODULE) -bool acpi_osi_is_win8(void); -#endif - -/*-------------------------------------------------------------------------- Device properties -------------------------------------------------------------------------- */ #define ACPI_DT_NAMESPACE_HID "PRP0001" diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c index 7ccba395c9dd..a5dc9034efee 100644 --- a/drivers/acpi/osl.c +++ b/drivers/acpi/osl.c @@ -175,11 +175,7 @@ static void __init acpi_request_region (struct acpi_generic_address *gas, if (!addr || !length) return; - /* Resources are never freed */ - if (gas->space_id == ACPI_ADR_SPACE_SYSTEM_IO) - request_region(addr, length, desc); - else if (gas->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) - request_mem_region(addr, length, desc); + acpi_reserve_region(addr, length, gas->space_id, 0, desc); } static void __init acpi_reserve_resources(void) @@ -540,7 +536,7 @@ static char acpi_os_name[ACPI_MAX_OVERRIDE_LEN]; acpi_status acpi_os_predefined_override(const struct acpi_predefined_names *init_val, - acpi_string * new_val) + char **new_val) { if (!init_val || !new_val) return AE_BAD_PARAMETER; @@ -1684,6 +1680,12 @@ int acpi_resources_are_enforced(void) } EXPORT_SYMBOL(acpi_resources_are_enforced); +bool acpi_osi_is_win8(void) +{ + return acpi_gbl_osi_data >= ACPI_OSI_WIN_8; +} +EXPORT_SYMBOL(acpi_osi_is_win8); + /* * Deallocate the memory for a spinlock. */ diff --git a/drivers/acpi/pci_irq.c b/drivers/acpi/pci_irq.c index b1def411c0b8..03e4b6c49c6d 100644 --- a/drivers/acpi/pci_irq.c +++ b/drivers/acpi/pci_irq.c @@ -44,7 +44,6 @@ ACPI_MODULE_NAME("pci_irq"); struct acpi_prt_entry { - struct list_head list; struct acpi_pci_id id; u8 pin; acpi_handle link; diff --git a/drivers/acpi/power.c b/drivers/acpi/power.c index e0bcfb642b52..93eac53b5110 100644 --- a/drivers/acpi/power.c +++ b/drivers/acpi/power.c @@ -684,7 +684,8 @@ int acpi_power_get_inferred_state(struct acpi_device *device, int *state) } } - *state = ACPI_STATE_D3_COLD; + *state = device->power.states[ACPI_STATE_D3_COLD].flags.valid ? + ACPI_STATE_D3_COLD : ACPI_STATE_D3_HOT; return 0; } @@ -710,8 +711,6 @@ int acpi_power_transition(struct acpi_device *device, int state) || (device->power.state > ACPI_STATE_D3_COLD)) return -ENODEV; - /* TBD: Resources must be ordered. */ - /* * First we reference all power resources required in the target list * (e.g. so the device doesn't lose power while transitioning). Then, @@ -761,6 +760,25 @@ static void acpi_power_sysfs_remove(struct acpi_device *device) device_remove_file(&device->dev, &dev_attr_resource_in_use); } +static void acpi_power_add_resource_to_list(struct acpi_power_resource *resource) +{ + mutex_lock(&power_resource_list_lock); + + if (!list_empty(&acpi_power_resource_list)) { + struct acpi_power_resource *r; + + list_for_each_entry(r, &acpi_power_resource_list, list_node) + if (r->order > resource->order) { + list_add_tail(&resource->list_node, &r->list_node); + goto out; + } + } + list_add_tail(&resource->list_node, &acpi_power_resource_list); + + out: + mutex_unlock(&power_resource_list_lock); +} + int acpi_add_power_resource(acpi_handle handle) { struct acpi_power_resource *resource; @@ -811,9 +829,7 @@ int acpi_add_power_resource(acpi_handle handle) if (!device_create_file(&device->dev, &dev_attr_resource_in_use)) device->remove = acpi_power_sysfs_remove; - mutex_lock(&power_resource_list_lock); - list_add(&resource->list_node, &acpi_power_resource_list); - mutex_unlock(&power_resource_list_lock); + acpi_power_add_resource_to_list(resource); acpi_device_add_finalize(device); return 0; @@ -844,7 +860,22 @@ void acpi_resume_power_resources(void) && resource->ref_count) { dev_info(&resource->device.dev, "Turning ON\n"); __acpi_power_on(resource); - } else if (state == ACPI_POWER_RESOURCE_STATE_ON + } + + mutex_unlock(&resource->resource_lock); + } + list_for_each_entry_reverse(resource, &acpi_power_resource_list, list_node) { + int result, state; + + mutex_lock(&resource->resource_lock); + + result = acpi_power_get_state(resource->device.handle, &state); + if (result) { + mutex_unlock(&resource->resource_lock); + continue; + } + + if (state == ACPI_POWER_RESOURCE_STATE_ON && !resource->ref_count) { dev_info(&resource->device.dev, "Turning OFF\n"); __acpi_power_off(resource); diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c index b1ec78b8a645..33a38d604630 100644 --- a/drivers/acpi/processor_core.c +++ b/drivers/acpi/processor_core.c @@ -184,7 +184,7 @@ phys_cpuid_t acpi_get_phys_id(acpi_handle handle, int type, u32 acpi_id) phys_cpuid_t phys_id; phys_id = map_mat_entry(handle, type, acpi_id); - if (phys_id == PHYS_CPUID_INVALID) + if (invalid_phys_cpuid(phys_id)) phys_id = map_madt_entry(type, acpi_id); return phys_id; @@ -196,7 +196,7 @@ int acpi_map_cpuid(phys_cpuid_t phys_id, u32 acpi_id) int i; #endif - if (phys_id == PHYS_CPUID_INVALID) { + if (invalid_phys_cpuid(phys_id)) { /* * On UP processor, there is no _MAT or MADT table. * So above phys_id is always set to PHYS_CPUID_INVALID. @@ -215,12 +215,12 @@ int acpi_map_cpuid(phys_cpuid_t phys_id, u32 acpi_id) * Ignores phys_id and always returns 0 for the processor * handle with acpi id 0 if nr_cpu_ids is 1. * This should be the case if SMP tables are not found. - * Return -1 for other CPU's handle. + * Return -EINVAL for other CPU's handle. */ if (nr_cpu_ids <= 1 && acpi_id == 0) return acpi_id; else - return -1; + return -EINVAL; } #ifdef CONFIG_SMP @@ -233,7 +233,7 @@ int acpi_map_cpuid(phys_cpuid_t phys_id, u32 acpi_id) if (phys_id == 0) return phys_id; #endif - return -1; + return -ENODEV; } int acpi_get_cpuid(acpi_handle handle, int type, u32 acpi_id) diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index 39e0c8e36244..d540f42c9232 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -94,7 +94,7 @@ static int set_max_cstate(const struct dmi_system_id *id) return 0; } -static struct dmi_system_id processor_power_dmi_table[] = { +static const struct dmi_system_id processor_power_dmi_table[] = { { set_max_cstate, "Clevo 5600D", { DMI_MATCH(DMI_BIOS_VENDOR,"Phoenix Technologies LTD"), DMI_MATCH(DMI_BIOS_VERSION,"SHE845M0.86C.0013.D.0302131307")}, diff --git a/drivers/acpi/processor_pdc.c b/drivers/acpi/processor_pdc.c index e5dd80800930..7cfbda4d7c51 100644 --- a/drivers/acpi/processor_pdc.c +++ b/drivers/acpi/processor_pdc.c @@ -52,10 +52,7 @@ static bool __init processor_physically_present(acpi_handle handle) type = (acpi_type == ACPI_TYPE_DEVICE) ? 1 : 0; cpuid = acpi_get_cpuid(handle, type, acpi_id); - if (cpuid == -1) - return false; - - return true; + return !invalid_logical_cpuid(cpuid); } static void acpi_set_pdc_bits(u32 *buf) diff --git a/drivers/acpi/resource.c b/drivers/acpi/resource.c index 8244f013f210..fcb7807ea8b7 100644 --- a/drivers/acpi/resource.c +++ b/drivers/acpi/resource.c @@ -26,6 +26,7 @@ #include <linux/device.h> #include <linux/export.h> #include <linux/ioport.h> +#include <linux/list.h> #include <linux/slab.h> #ifdef CONFIG_X86 @@ -621,3 +622,162 @@ int acpi_dev_filter_resource_type(struct acpi_resource *ares, return (type & types) ? 0 : 1; } EXPORT_SYMBOL_GPL(acpi_dev_filter_resource_type); + +struct reserved_region { + struct list_head node; + u64 start; + u64 end; +}; + +static LIST_HEAD(reserved_io_regions); +static LIST_HEAD(reserved_mem_regions); + +static int request_range(u64 start, u64 end, u8 space_id, unsigned long flags, + char *desc) +{ + unsigned int length = end - start + 1; + struct resource *res; + + res = space_id == ACPI_ADR_SPACE_SYSTEM_IO ? + request_region(start, length, desc) : + request_mem_region(start, length, desc); + if (!res) + return -EIO; + + res->flags &= ~flags; + return 0; +} + +static int add_region_before(u64 start, u64 end, u8 space_id, + unsigned long flags, char *desc, + struct list_head *head) +{ + struct reserved_region *reg; + int error; + + reg = kmalloc(sizeof(*reg), GFP_KERNEL); + if (!reg) + return -ENOMEM; + + error = request_range(start, end, space_id, flags, desc); + if (error) + return error; + + reg->start = start; + reg->end = end; + list_add_tail(®->node, head); + return 0; +} + +/** + * acpi_reserve_region - Reserve an I/O or memory region as a system resource. + * @start: Starting address of the region. + * @length: Length of the region. + * @space_id: Identifier of address space to reserve the region from. + * @flags: Resource flags to clear for the region after requesting it. + * @desc: Region description (for messages). + * + * Reserve an I/O or memory region as a system resource to prevent others from + * using it. If the new region overlaps with one of the regions (in the given + * address space) already reserved by this routine, only the non-overlapping + * parts of it will be reserved. + * + * Returned is either 0 (success) or a negative error code indicating a resource + * reservation problem. It is the code of the first encountered error, but the + * routine doesn't abort until it has attempted to request all of the parts of + * the new region that don't overlap with other regions reserved previously. + * + * The resources requested by this routine are never released. + */ +int acpi_reserve_region(u64 start, unsigned int length, u8 space_id, + unsigned long flags, char *desc) +{ + struct list_head *regions; + struct reserved_region *reg; + u64 end = start + length - 1; + int ret = 0, error = 0; + + if (space_id == ACPI_ADR_SPACE_SYSTEM_IO) + regions = &reserved_io_regions; + else if (space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) + regions = &reserved_mem_regions; + else + return -EINVAL; + + if (list_empty(regions)) + return add_region_before(start, end, space_id, flags, desc, regions); + + list_for_each_entry(reg, regions, node) + if (reg->start == end + 1) { + /* The new region can be prepended to this one. */ + ret = request_range(start, end, space_id, flags, desc); + if (!ret) + reg->start = start; + + return ret; + } else if (reg->start > end) { + /* No overlap. Add the new region here and get out. */ + return add_region_before(start, end, space_id, flags, + desc, ®->node); + } else if (reg->end == start - 1) { + goto combine; + } else if (reg->end >= start) { + goto overlap; + } + + /* The new region goes after the last existing one. */ + return add_region_before(start, end, space_id, flags, desc, regions); + + overlap: + /* + * The new region overlaps an existing one. + * + * The head part of the new region immediately preceding the existing + * overlapping one can be combined with it right away. + */ + if (reg->start > start) { + error = request_range(start, reg->start - 1, space_id, flags, desc); + if (error) + ret = error; + else + reg->start = start; + } + + combine: + /* + * The new region is adjacent to an existing one. If it extends beyond + * that region all the way to the next one, it is possible to combine + * all three of them. + */ + while (reg->end < end) { + struct reserved_region *next = NULL; + u64 a = reg->end + 1, b = end; + + if (!list_is_last(®->node, regions)) { + next = list_next_entry(reg, node); + if (next->start <= end) + b = next->start - 1; + } + error = request_range(a, b, space_id, flags, desc); + if (!error) { + if (next && next->start == b + 1) { + reg->end = next->end; + list_del(&next->node); + kfree(next); + } else { + reg->end = end; + break; + } + } else if (next) { + if (!ret) + ret = error; + + reg = next; + } else { + break; + } + } + + return ret ? ret : error; +} +EXPORT_SYMBOL_GPL(acpi_reserve_region); diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index 67509b23172c..2649a068671d 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -1769,15 +1769,9 @@ static void acpi_bus_init_power_state(struct acpi_device *device, int state) if (acpi_has_method(device->handle, pathname)) ps->flags.explicit_set = 1; - /* - * State is valid if there are means to put the device into it. - * D3hot is only valid if _PR3 present. - */ - if (!list_empty(&ps->resources) - || (ps->flags.explicit_set && state < ACPI_STATE_D3_HOT)) { + /* State is valid if there are means to put the device into it. */ + if (!list_empty(&ps->resources) || ps->flags.explicit_set) ps->flags.valid = 1; - ps->flags.os_accessible = 1; - } ps->power = -1; /* Unknown - driver assigned */ ps->latency = -1; /* Unknown - driver assigned */ @@ -1813,21 +1807,13 @@ static void acpi_bus_get_power_flags(struct acpi_device *device) acpi_bus_init_power_state(device, i); INIT_LIST_HEAD(&device->power.states[ACPI_STATE_D3_COLD].resources); + if (!list_empty(&device->power.states[ACPI_STATE_D3_HOT].resources)) + device->power.states[ACPI_STATE_D3_COLD].flags.valid = 1; - /* Set defaults for D0 and D3 states (always valid) */ + /* Set defaults for D0 and D3hot states (always valid) */ device->power.states[ACPI_STATE_D0].flags.valid = 1; device->power.states[ACPI_STATE_D0].power = 100; - device->power.states[ACPI_STATE_D3_COLD].flags.valid = 1; - device->power.states[ACPI_STATE_D3_COLD].power = 0; - - /* Set D3cold's explicit_set flag if _PS3 exists. */ - if (device->power.states[ACPI_STATE_D3_HOT].flags.explicit_set) - device->power.states[ACPI_STATE_D3_COLD].flags.explicit_set = 1; - - /* Presence of _PS3 or _PRx means we can put the device into D3 cold */ - if (device->power.states[ACPI_STATE_D3_HOT].flags.explicit_set || - device->power.flags.power_resources) - device->power.states[ACPI_STATE_D3_COLD].flags.os_accessible = 1; + device->power.states[ACPI_STATE_D3_HOT].flags.valid = 1; if (acpi_bus_init_power(device)) device->flags.power_manageable = 0; @@ -1950,6 +1936,62 @@ bool acpi_dock_match(acpi_handle handle) return acpi_has_method(handle, "_DCK"); } +static acpi_status +acpi_backlight_cap_match(acpi_handle handle, u32 level, void *context, + void **return_value) +{ + long *cap = context; + + if (acpi_has_method(handle, "_BCM") && + acpi_has_method(handle, "_BCL")) { + ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found generic backlight " + "support\n")); + *cap |= ACPI_VIDEO_BACKLIGHT; + if (!acpi_has_method(handle, "_BQC")) + printk(KERN_WARNING FW_BUG PREFIX "No _BQC method, " + "cannot determine initial brightness\n"); + /* We have backlight support, no need to scan further */ + return AE_CTRL_TERMINATE; + } + return 0; +} + +/* Returns true if the ACPI object is a video device which can be + * handled by video.ko. + * The device will get a Linux specific CID added in scan.c to + * identify the device as an ACPI graphics device + * Be aware that the graphics device may not be physically present + * Use acpi_video_get_capabilities() to detect general ACPI video + * capabilities of present cards + */ +long acpi_is_video_device(acpi_handle handle) +{ + long video_caps = 0; + + /* Is this device able to support video switching ? */ + if (acpi_has_method(handle, "_DOD") || acpi_has_method(handle, "_DOS")) + video_caps |= ACPI_VIDEO_OUTPUT_SWITCHING; + + /* Is this device able to retrieve a video ROM ? */ + if (acpi_has_method(handle, "_ROM")) + video_caps |= ACPI_VIDEO_ROM_AVAILABLE; + + /* Is this device able to configure which video head to be POSTed ? */ + if (acpi_has_method(handle, "_VPO") && + acpi_has_method(handle, "_GPD") && + acpi_has_method(handle, "_SPD")) + video_caps |= ACPI_VIDEO_DEVICE_POSTING; + + /* Only check for backlight functionality if one of the above hit. */ + if (video_caps) + acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, + ACPI_UINT32_MAX, acpi_backlight_cap_match, NULL, + &video_caps, NULL); + + return video_caps; +} +EXPORT_SYMBOL(acpi_is_video_device); + const char *acpi_device_hid(struct acpi_device *device) { struct acpi_hardware_id *hid; diff --git a/drivers/acpi/utils.c b/drivers/acpi/utils.c index cd49a3982b6a..67c548ad3764 100644 --- a/drivers/acpi/utils.c +++ b/drivers/acpi/utils.c @@ -712,3 +712,18 @@ bool acpi_check_dsm(acpi_handle handle, const u8 *uuid, int rev, u64 funcs) return false; } EXPORT_SYMBOL(acpi_check_dsm); + +/* + * acpi_backlight= handling, this is done here rather then in video_detect.c + * because __setup cannot be used in modules. + */ +char acpi_video_backlight_string[16]; +EXPORT_SYMBOL(acpi_video_backlight_string); + +static int __init acpi_backlight(char *str) +{ + strlcpy(acpi_video_backlight_string, str, + sizeof(acpi_video_backlight_string)); + return 1; +} +__setup("acpi_backlight=", acpi_backlight); diff --git a/drivers/acpi/video_detect.c b/drivers/acpi/video_detect.c index c42feb2bacd0..815f75ef2411 100644 --- a/drivers/acpi/video_detect.c +++ b/drivers/acpi/video_detect.c @@ -1,106 +1,61 @@ /* + * Copyright (C) 2015 Red Hat Inc. + * Hans de Goede <hdegoede@redhat.com> * Copyright (C) 2008 SuSE Linux Products GmbH * Thomas Renninger <trenn@suse.de> * * May be copied or modified under the terms of the GNU General Public License * * video_detect.c: - * Provides acpi_is_video_device() for early scanning of ACPI devices in scan.c - * There a Linux specific (Spec does not provide a HID for video devices) is - * assigned - * * After PCI devices are glued with ACPI devices * acpi_get_pci_dev() can be called to identify ACPI graphics * devices for which a real graphics card is plugged in * - * Now acpi_video_get_capabilities() can be called to check which - * capabilities the graphics cards plugged in support. The check for general - * video capabilities will be triggered by the first caller of - * acpi_video_get_capabilities(NULL); which will happen when the first - * backlight switching supporting driver calls: - * acpi_video_backlight_support(); - * * Depending on whether ACPI graphics extensions (cmp. ACPI spec Appendix B) * are available, video.ko should be used to handle the device. * * Otherwise vendor specific drivers like thinkpad_acpi, asus-laptop, * sony_acpi,... can take care about backlight brightness. * - * If CONFIG_ACPI_VIDEO is neither set as "compiled in" (y) nor as a module (m) - * this file will not be compiled, acpi_video_get_capabilities() and - * acpi_video_backlight_support() will always return 0 and vendor specific - * drivers always can handle backlight. + * Backlight drivers can use acpi_video_get_backlight_type() to determine + * which driver should handle the backlight. * + * If CONFIG_ACPI_VIDEO is neither set as "compiled in" (y) nor as a module (m) + * this file will not be compiled and acpi_video_get_backlight_type() will + * always return acpi_backlight_vendor. */ #include <linux/export.h> #include <linux/acpi.h> +#include <linux/backlight.h> #include <linux/dmi.h> +#include <linux/module.h> #include <linux/pci.h> - -#include "internal.h" +#include <linux/types.h> +#include <acpi/video.h> ACPI_MODULE_NAME("video"); #define _COMPONENT ACPI_VIDEO_COMPONENT -static long acpi_video_support; -static bool acpi_video_caps_checked; +void acpi_video_unregister_backlight(void); -static acpi_status -acpi_backlight_cap_match(acpi_handle handle, u32 level, void *context, - void **return_value) -{ - long *cap = context; +static bool backlight_notifier_registered; +static struct notifier_block backlight_nb; - if (acpi_has_method(handle, "_BCM") && - acpi_has_method(handle, "_BCL")) { - ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found generic backlight " - "support\n")); - *cap |= ACPI_VIDEO_BACKLIGHT; - if (!acpi_has_method(handle, "_BQC")) - printk(KERN_WARNING FW_BUG PREFIX "No _BQC method, " - "cannot determine initial brightness\n"); - /* We have backlight support, no need to scan further */ - return AE_CTRL_TERMINATE; - } - return 0; -} +static enum acpi_backlight_type acpi_backlight_cmdline = acpi_backlight_undef; +static enum acpi_backlight_type acpi_backlight_dmi = acpi_backlight_undef; -/* Returns true if the ACPI object is a video device which can be - * handled by video.ko. - * The device will get a Linux specific CID added in scan.c to - * identify the device as an ACPI graphics device - * Be aware that the graphics device may not be physically present - * Use acpi_video_get_capabilities() to detect general ACPI video - * capabilities of present cards - */ -long acpi_is_video_device(acpi_handle handle) +static void acpi_video_parse_cmdline(void) { - long video_caps = 0; - - /* Is this device able to support video switching ? */ - if (acpi_has_method(handle, "_DOD") || acpi_has_method(handle, "_DOS")) - video_caps |= ACPI_VIDEO_OUTPUT_SWITCHING; - - /* Is this device able to retrieve a video ROM ? */ - if (acpi_has_method(handle, "_ROM")) - video_caps |= ACPI_VIDEO_ROM_AVAILABLE; - - /* Is this device able to configure which video head to be POSTed ? */ - if (acpi_has_method(handle, "_VPO") && - acpi_has_method(handle, "_GPD") && - acpi_has_method(handle, "_SPD")) - video_caps |= ACPI_VIDEO_DEVICE_POSTING; - - /* Only check for backlight functionality if one of the above hit. */ - if (video_caps) - acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, - ACPI_UINT32_MAX, acpi_backlight_cap_match, NULL, - &video_caps, NULL); - - return video_caps; + if (!strcmp("vendor", acpi_video_backlight_string)) + acpi_backlight_cmdline = acpi_backlight_vendor; + if (!strcmp("video", acpi_video_backlight_string)) + acpi_backlight_cmdline = acpi_backlight_video; + if (!strcmp("native", acpi_video_backlight_string)) + acpi_backlight_cmdline = acpi_backlight_native; + if (!strcmp("none", acpi_video_backlight_string)) + acpi_backlight_cmdline = acpi_backlight_none; } -EXPORT_SYMBOL(acpi_is_video_device); static acpi_status find_video(acpi_handle handle, u32 lvl, void *context, void **rv) @@ -109,7 +64,7 @@ find_video(acpi_handle handle, u32 lvl, void *context, void **rv) struct pci_dev *dev; struct acpi_device *acpi_dev; - const struct acpi_device_id video_ids[] = { + static const struct acpi_device_id video_ids[] = { {ACPI_VIDEO_HID, 0}, {"", 0}, }; @@ -130,11 +85,23 @@ find_video(acpi_handle handle, u32 lvl, void *context, void **rv) * buggy */ static int video_detect_force_vendor(const struct dmi_system_id *d) { - acpi_video_support |= ACPI_VIDEO_BACKLIGHT_DMI_VENDOR; + acpi_backlight_dmi = acpi_backlight_vendor; + return 0; +} + +static int video_detect_force_video(const struct dmi_system_id *d) +{ + acpi_backlight_dmi = acpi_backlight_video; return 0; } -static struct dmi_system_id video_detect_dmi_table[] = { +static int video_detect_force_native(const struct dmi_system_id *d) +{ + acpi_backlight_dmi = acpi_backlight_native; + return 0; +} + +static const struct dmi_system_id video_detect_dmi_table[] = { /* On Samsung X360, the BIOS will set a flag (VDRV) if generic * ACPI backlight device is used. This flag will definitively break * the backlight interface (even the vendor interface) untill next @@ -174,137 +141,209 @@ static struct dmi_system_id video_detect_dmi_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 5737"), }, }, + + /* + * These models have a working acpi_video backlight control, and using + * native backlight causes a regression where backlight does not work + * when userspace is not handling brightness key events. Disable + * native_backlight on these to fix this: + * https://bugzilla.kernel.org/show_bug.cgi?id=81691 + */ + { + .callback = video_detect_force_video, + .ident = "ThinkPad T420", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad T420"), + }, + }, + { + .callback = video_detect_force_video, + .ident = "ThinkPad T520", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad T520"), + }, + }, + { + .callback = video_detect_force_video, + .ident = "ThinkPad X201s", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad X201s"), + }, + }, + + /* The native backlight controls do not work on some older machines */ + { + /* https://bugs.freedesktop.org/show_bug.cgi?id=81515 */ + .callback = video_detect_force_video, + .ident = "HP ENVY 15 Notebook", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP ENVY 15 Notebook PC"), + }, + }, + { + .callback = video_detect_force_video, + .ident = "SAMSUNG 870Z5E/880Z5E/680Z5E", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), + DMI_MATCH(DMI_PRODUCT_NAME, "870Z5E/880Z5E/680Z5E"), + }, + }, + { + .callback = video_detect_force_video, + .ident = "SAMSUNG 370R4E/370R4V/370R5E/3570RE/370R5V", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), + DMI_MATCH(DMI_PRODUCT_NAME, + "370R4E/370R4V/370R5E/3570RE/370R5V"), + }, + }, + { + /* https://bugzilla.redhat.com/show_bug.cgi?id=1186097 */ + .callback = video_detect_force_video, + .ident = "SAMSUNG 3570R/370R/470R/450R/510R/4450RV", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), + DMI_MATCH(DMI_PRODUCT_NAME, + "3570R/370R/470R/450R/510R/4450RV"), + }, + }, + { + /* https://bugzilla.redhat.com/show_bug.cgi?id=1094948 */ + .callback = video_detect_force_video, + .ident = "SAMSUNG 730U3E/740U3E", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), + DMI_MATCH(DMI_PRODUCT_NAME, "730U3E/740U3E"), + }, + }, + { + /* https://bugs.freedesktop.org/show_bug.cgi?id=87286 */ + .callback = video_detect_force_video, + .ident = "SAMSUNG 900X3C/900X3D/900X3E/900X4C/900X4D", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), + DMI_MATCH(DMI_PRODUCT_NAME, + "900X3C/900X3D/900X3E/900X4C/900X4D"), + }, + }, + { + /* https://bugzilla.redhat.com/show_bug.cgi?id=1163574 */ + .callback = video_detect_force_video, + .ident = "Dell XPS15 L521X", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "XPS L521X"), + }, + }, + + /* Non win8 machines which need native backlight nevertheless */ + { + /* https://bugzilla.redhat.com/show_bug.cgi?id=1187004 */ + .callback = video_detect_force_native, + .ident = "Lenovo Ideapad Z570", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_NAME, "102434U"), + }, + }, + { + /* https://bugzilla.redhat.com/show_bug.cgi?id=1217249 */ + .callback = video_detect_force_native, + .ident = "Apple MacBook Pro 12,1", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro12,1"), + }, + }, { }, }; +static int acpi_video_backlight_notify(struct notifier_block *nb, + unsigned long val, void *bd) +{ + struct backlight_device *backlight = bd; + + /* A raw bl registering may change video -> native */ + if (backlight->props.type == BACKLIGHT_RAW && + val == BACKLIGHT_REGISTERED && + acpi_video_get_backlight_type() != acpi_backlight_video) + acpi_video_unregister_backlight(); + + return NOTIFY_OK; +} + /* - * Returns the video capabilities of a specific ACPI graphics device + * Determine which type of backlight interface to use on this system, + * First check cmdline, then dmi quirks, then do autodetect. * - * if NULL is passed as argument all ACPI devices are enumerated and - * all graphics capabilities of physically present devices are - * summarized and returned. This is cached and done only once. + * The autodetect order is: + * 1) Is the acpi-video backlight interface supported -> + * no, use a vendor interface + * 2) Is this a win8 "ready" BIOS and do we have a native interface -> + * yes, use a native interface + * 3) Else use the acpi-video interface + * + * Arguably the native on win8 check should be done first, but that would + * be a behavior change, which may causes issues. */ -long acpi_video_get_capabilities(acpi_handle graphics_handle) +enum acpi_backlight_type acpi_video_get_backlight_type(void) { - long caps = 0; - struct acpi_device *tmp_dev; - acpi_status status; - - if (acpi_video_caps_checked && graphics_handle == NULL) - return acpi_video_support; - - if (!graphics_handle) { - /* Only do the global walk through all graphics devices once */ - acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT, - ACPI_UINT32_MAX, find_video, NULL, - &caps, NULL); - /* There might be boot param flags set already... */ - acpi_video_support |= caps; - acpi_video_caps_checked = 1; - /* Add blacklists here. Be careful to use the right *DMI* bits - * to still be able to override logic via boot params, e.g.: - * - * if (dmi_name_in_vendors("XY")) { - * acpi_video_support |= - * ACPI_VIDEO_BACKLIGHT_DMI_VENDOR; - *} - */ + static DEFINE_MUTEX(init_mutex); + static bool init_done; + static long video_caps; + /* Parse cmdline, dmi and acpi only once */ + mutex_lock(&init_mutex); + if (!init_done) { + acpi_video_parse_cmdline(); dmi_check_system(video_detect_dmi_table); - } else { - status = acpi_bus_get_device(graphics_handle, &tmp_dev); - if (ACPI_FAILURE(status)) { - ACPI_EXCEPTION((AE_INFO, status, "Invalid device")); - return 0; - } - acpi_walk_namespace(ACPI_TYPE_DEVICE, graphics_handle, + acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT, ACPI_UINT32_MAX, find_video, NULL, - &caps, NULL); + &video_caps, NULL); + backlight_nb.notifier_call = acpi_video_backlight_notify; + backlight_nb.priority = 0; + if (backlight_register_notifier(&backlight_nb) == 0) + backlight_notifier_registered = true; + init_done = true; } - ACPI_DEBUG_PRINT((ACPI_DB_INFO, "We have 0x%lX video support %s %s\n", - graphics_handle ? caps : acpi_video_support, - graphics_handle ? "on device " : "in general", - graphics_handle ? acpi_device_bid(tmp_dev) : "")); - return caps; -} -EXPORT_SYMBOL(acpi_video_get_capabilities); + mutex_unlock(&init_mutex); -static void acpi_video_caps_check(void) -{ - /* - * We must check whether the ACPI graphics device is physically plugged - * in. Therefore this must be called after binding PCI and ACPI devices - */ - if (!acpi_video_caps_checked) - acpi_video_get_capabilities(NULL); -} + if (acpi_backlight_cmdline != acpi_backlight_undef) + return acpi_backlight_cmdline; -bool acpi_osi_is_win8(void) -{ - return acpi_gbl_osi_data >= ACPI_OSI_WIN_8; -} -EXPORT_SYMBOL(acpi_osi_is_win8); + if (acpi_backlight_dmi != acpi_backlight_undef) + return acpi_backlight_dmi; -/* Promote the vendor interface instead of the generic video module. - * This function allow DMI blacklists to be implemented by externals - * platform drivers instead of putting a big blacklist in video_detect.c - * After calling this function you will probably want to call - * acpi_video_unregister() to make sure the video module is not loaded - */ -void acpi_video_dmi_promote_vendor(void) -{ - acpi_video_caps_check(); - acpi_video_support |= ACPI_VIDEO_BACKLIGHT_DMI_VENDOR; -} -EXPORT_SYMBOL(acpi_video_dmi_promote_vendor); - -/* To be called when a driver who previously promoted the vendor - * interface */ -void acpi_video_dmi_demote_vendor(void) -{ - acpi_video_caps_check(); - acpi_video_support &= ~ACPI_VIDEO_BACKLIGHT_DMI_VENDOR; -} -EXPORT_SYMBOL(acpi_video_dmi_demote_vendor); - -/* Returns true if video.ko can do backlight switching */ -int acpi_video_backlight_support(void) -{ - acpi_video_caps_check(); - - /* First check for boot param -> highest prio */ - if (acpi_video_support & ACPI_VIDEO_BACKLIGHT_FORCE_VENDOR) - return 0; - else if (acpi_video_support & ACPI_VIDEO_BACKLIGHT_FORCE_VIDEO) - return 1; + if (!(video_caps & ACPI_VIDEO_BACKLIGHT)) + return acpi_backlight_vendor; - /* Then check for DMI blacklist -> second highest prio */ - if (acpi_video_support & ACPI_VIDEO_BACKLIGHT_DMI_VENDOR) - return 0; - else if (acpi_video_support & ACPI_VIDEO_BACKLIGHT_DMI_VIDEO) - return 1; + if (acpi_osi_is_win8() && backlight_device_registered(BACKLIGHT_RAW)) + return acpi_backlight_native; - /* Then go the default way */ - return acpi_video_support & ACPI_VIDEO_BACKLIGHT; + return acpi_backlight_video; } -EXPORT_SYMBOL(acpi_video_backlight_support); +EXPORT_SYMBOL(acpi_video_get_backlight_type); /* - * Use acpi_backlight=vendor/video to force that backlight switching - * is processed by vendor specific acpi drivers or video.ko driver. + * Set the preferred backlight interface type based on DMI info. + * This function allows DMI blacklists to be implemented by external + * platform drivers instead of putting a big blacklist in video_detect.c */ -static int __init acpi_backlight(char *str) +void acpi_video_set_dmi_backlight_type(enum acpi_backlight_type type) { - if (str == NULL || *str == '\0') - return 1; - else { - if (!strcmp("vendor", str)) - acpi_video_support |= - ACPI_VIDEO_BACKLIGHT_FORCE_VENDOR; - if (!strcmp("video", str)) - acpi_video_support |= - ACPI_VIDEO_BACKLIGHT_FORCE_VIDEO; - } - return 1; + acpi_backlight_dmi = type; + /* Remove acpi-video backlight interface if it is no longer desired */ + if (acpi_video_get_backlight_type() != acpi_backlight_video) + acpi_video_unregister_backlight(); +} +EXPORT_SYMBOL(acpi_video_set_dmi_backlight_type); + +void __exit acpi_video_detect_exit(void) +{ + if (backlight_notifier_registered) + backlight_unregister_notifier(&backlight_nb); } -__setup("acpi_backlight=", acpi_backlight); diff --git a/drivers/gpu/drm/i915/intel_opregion.c b/drivers/gpu/drm/i915/intel_opregion.c index 71e87abdcae7..481337436f72 100644 --- a/drivers/gpu/drm/i915/intel_opregion.c +++ b/drivers/gpu/drm/i915/intel_opregion.c @@ -396,16 +396,6 @@ int intel_opregion_notify_adapter(struct drm_device *dev, pci_power_t state) return -EINVAL; } -/* - * If the vendor backlight interface is not in use and ACPI backlight interface - * is broken, do not bother processing backlight change requests from firmware. - */ -static bool should_ignore_backlight_request(void) -{ - return acpi_video_backlight_support() && - !acpi_video_verify_backlight_support(); -} - static u32 asle_set_backlight(struct drm_device *dev, u32 bclp) { struct drm_i915_private *dev_priv = dev->dev_private; @@ -414,7 +404,7 @@ static u32 asle_set_backlight(struct drm_device *dev, u32 bclp) DRM_DEBUG_DRIVER("bclp = 0x%08x\n", bclp); - if (should_ignore_backlight_request()) { + if (acpi_video_get_backlight_type() == acpi_backlight_native) { DRM_DEBUG_KMS("opregion backlight request ignored\n"); return 0; } diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c index 6f6f175f51f7..314a625b78d6 100644 --- a/drivers/pci/pci-acpi.c +++ b/drivers/pci/pci-acpi.c @@ -420,7 +420,7 @@ static int acpi_pci_set_power_state(struct pci_dev *dev, pci_power_t state) [PCI_D0] = ACPI_STATE_D0, [PCI_D1] = ACPI_STATE_D1, [PCI_D2] = ACPI_STATE_D2, - [PCI_D3hot] = ACPI_STATE_D3_COLD, + [PCI_D3hot] = ACPI_STATE_D3_HOT, [PCI_D3cold] = ACPI_STATE_D3_COLD, }; int error = -EINVAL; diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig index f9f205cb1f11..909133c6ffb7 100644 --- a/drivers/platform/x86/Kconfig +++ b/drivers/platform/x86/Kconfig @@ -71,9 +71,10 @@ config ASUS_LAPTOP depends on ACPI select LEDS_CLASS select NEW_LEDS - select BACKLIGHT_CLASS_DEVICE + depends on BACKLIGHT_CLASS_DEVICE depends on INPUT depends on RFKILL || RFKILL = n + depends on ACPI_VIDEO || ACPI_VIDEO = n select INPUT_SPARSEKMAP select INPUT_POLLDEV ---help--- @@ -95,6 +96,7 @@ config DELL_LAPTOP depends on X86 depends on DCDBAS depends on BACKLIGHT_CLASS_DEVICE + depends on ACPI_VIDEO || ACPI_VIDEO = n depends on RFKILL || RFKILL = n depends on SERIO_I8042 select POWER_SUPPLY @@ -109,6 +111,7 @@ config DELL_WMI tristate "Dell WMI extras" depends on ACPI_WMI depends on INPUT + depends on ACPI_VIDEO || ACPI_VIDEO = n select INPUT_SPARSEKMAP ---help--- Say Y here if you want to support WMI-based hotkeys on Dell laptops. @@ -144,6 +147,7 @@ config FUJITSU_LAPTOP depends on ACPI depends on INPUT depends on BACKLIGHT_CLASS_DEVICE + depends on ACPI_VIDEO || ACPI_VIDEO = n depends on LEDS_CLASS || LEDS_CLASS=n ---help--- This is a driver for laptops built by Fujitsu: @@ -247,6 +251,7 @@ config MSI_LAPTOP tristate "MSI Laptop Extras" depends on ACPI depends on BACKLIGHT_CLASS_DEVICE + depends on ACPI_VIDEO || ACPI_VIDEO = n depends on RFKILL depends on INPUT && SERIO_I8042 select INPUT_SPARSEKMAP @@ -280,6 +285,7 @@ config COMPAL_LAPTOP tristate "Compal (and others) Laptop Extras" depends on ACPI depends on BACKLIGHT_CLASS_DEVICE + depends on ACPI_VIDEO || ACPI_VIDEO = n depends on RFKILL depends on HWMON depends on POWER_SUPPLY @@ -296,7 +302,8 @@ config COMPAL_LAPTOP config SONY_LAPTOP tristate "Sony Laptop Extras" depends on ACPI - select BACKLIGHT_CLASS_DEVICE + depends on ACPI_VIDEO || ACPI_VIDEO = n + depends on BACKLIGHT_CLASS_DEVICE depends on INPUT depends on RFKILL ---help--- @@ -321,6 +328,7 @@ config IDEAPAD_LAPTOP depends on RFKILL && INPUT depends on SERIO_I8042 depends on BACKLIGHT_CLASS_DEVICE + depends on ACPI_VIDEO || ACPI_VIDEO = n select INPUT_SPARSEKMAP help This is a driver for Lenovo IdeaPad netbooks contains drivers for @@ -331,8 +339,8 @@ config THINKPAD_ACPI depends on ACPI depends on INPUT depends on RFKILL || RFKILL = n - select BACKLIGHT_LCD_SUPPORT - select BACKLIGHT_CLASS_DEVICE + depends on ACPI_VIDEO || ACPI_VIDEO = n + depends on BACKLIGHT_CLASS_DEVICE select HWMON select NVRAM select NEW_LEDS @@ -500,8 +508,9 @@ config EEEPC_LAPTOP depends on ACPI depends on INPUT depends on RFKILL || RFKILL = n + depends on ACPI_VIDEO || ACPI_VIDEO = n depends on HOTPLUG_PCI - select BACKLIGHT_CLASS_DEVICE + depends on BACKLIGHT_CLASS_DEVICE select HWMON select LEDS_CLASS select NEW_LEDS @@ -587,6 +596,7 @@ config MSI_WMI depends on ACPI_WMI depends on INPUT depends on BACKLIGHT_CLASS_DEVICE + depends on ACPI_VIDEO || ACPI_VIDEO = n select INPUT_SPARSEKMAP help Say Y here if you want to support WMI-based hotkeys on MSI laptops. @@ -824,6 +834,7 @@ config MXM_WMI config INTEL_OAKTRAIL tristate "Intel Oaktrail Platform Extras" depends on ACPI + depends on ACPI_VIDEO || ACPI_VIDEO = n depends on RFKILL && BACKLIGHT_CLASS_DEVICE && ACPI ---help--- Intel Oaktrail platform need this driver to provide interfaces to diff --git a/drivers/platform/x86/acer-wmi.c b/drivers/platform/x86/acer-wmi.c index 3ac29a1e8f92..f6b280dbfb33 100644 --- a/drivers/platform/x86/acer-wmi.c +++ b/drivers/platform/x86/acer-wmi.c @@ -2246,14 +2246,10 @@ static int __init acer_wmi_init(void) set_quirks(); if (dmi_check_system(video_vendor_dmi_table)) - acpi_video_dmi_promote_vendor(); - if (acpi_video_backlight_support()) { + acpi_video_set_dmi_backlight_type(acpi_backlight_vendor); + + if (acpi_video_get_backlight_type() != acpi_backlight_vendor) interface->capability &= ~ACER_CAP_BRIGHTNESS; - pr_info("Brightness must be controlled by acpi video driver\n"); - } else { - pr_info("Disabling ACPI video driver\n"); - acpi_video_unregister_backlight(); - } if (wmi_has_guid(WMID_GUID3)) { if (ec_raw_mode) { diff --git a/drivers/platform/x86/apple-gmux.c b/drivers/platform/x86/apple-gmux.c index 6808715003f6..0dec3f59917a 100644 --- a/drivers/platform/x86/apple-gmux.c +++ b/drivers/platform/x86/apple-gmux.c @@ -550,8 +550,7 @@ static int gmux_probe(struct pnp_dev *pnp, const struct pnp_device_id *id) * backlight control and supports more levels than other options. * Disable the other backlight choices. */ - acpi_video_dmi_promote_vendor(); - acpi_video_unregister(); + acpi_video_set_dmi_backlight_type(acpi_backlight_vendor); apple_bl_unregister(); gmux_data->power_state = VGA_SWITCHEROO_ON; @@ -645,7 +644,6 @@ static void gmux_remove(struct pnp_dev *pnp) apple_gmux_data = NULL; kfree(gmux_data); - acpi_video_dmi_demote_vendor(); acpi_video_register(); apple_bl_register(); } diff --git a/drivers/platform/x86/asus-laptop.c b/drivers/platform/x86/asus-laptop.c index 46b274693872..58d29c4f2840 100644 --- a/drivers/platform/x86/asus-laptop.c +++ b/drivers/platform/x86/asus-laptop.c @@ -54,6 +54,7 @@ #include <linux/slab.h> #include <linux/dmi.h> #include <linux/acpi.h> +#include <acpi/video.h> #define ASUS_LAPTOP_VERSION "0.42" @@ -1884,12 +1885,11 @@ static int asus_acpi_add(struct acpi_device *device) if (result) goto fail_platform; - if (!acpi_video_backlight_support()) { + if (acpi_video_get_backlight_type() == acpi_backlight_vendor) { result = asus_backlight_init(asus); if (result) goto fail_backlight; - } else - pr_info("Backlight controlled by ACPI video driver\n"); + } result = asus_input_init(asus); if (result) diff --git a/drivers/platform/x86/asus-wmi.c b/drivers/platform/x86/asus-wmi.c index 7543a56e0f45..6f8558f744a4 100644 --- a/drivers/platform/x86/asus-wmi.c +++ b/drivers/platform/x86/asus-wmi.c @@ -1364,7 +1364,7 @@ static void asus_wmi_notify(u32 value, void *context) code = ASUS_WMI_BRN_DOWN; if (code == ASUS_WMI_BRN_DOWN || code == ASUS_WMI_BRN_UP) { - if (!acpi_video_backlight_support()) { + if (acpi_video_get_backlight_type() == acpi_backlight_vendor) { asus_wmi_backlight_notify(asus, orig_code); goto exit; } @@ -1772,17 +1772,16 @@ static int asus_wmi_add(struct platform_device *pdev) stop this from showing up */ chassis_type = dmi_get_system_info(DMI_CHASSIS_TYPE); if (chassis_type && !strcmp(chassis_type, "3")) - acpi_video_dmi_promote_vendor(); + acpi_video_set_dmi_backlight_type(acpi_backlight_vendor); + if (asus->driver->quirks->wmi_backlight_power) - acpi_video_dmi_promote_vendor(); - if (!acpi_video_backlight_support()) { - pr_info("Disabling ACPI video driver\n"); - acpi_video_unregister(); + acpi_video_set_dmi_backlight_type(acpi_backlight_vendor); + + if (acpi_video_get_backlight_type() == acpi_backlight_vendor) { err = asus_wmi_backlight_init(asus); if (err && err != -ENODEV) goto fail_backlight; - } else - pr_info("Backlight controlled by ACPI video driver\n"); + } status = wmi_install_notify_handler(asus->driver->event_guid, asus_wmi_notify, asus); diff --git a/drivers/platform/x86/compal-laptop.c b/drivers/platform/x86/compal-laptop.c index b4e94471f3d5..f2706d27adff 100644 --- a/drivers/platform/x86/compal-laptop.c +++ b/drivers/platform/x86/compal-laptop.c @@ -82,7 +82,7 @@ #include <linux/hwmon-sysfs.h> #include <linux/power_supply.h> #include <linux/fb.h> - +#include <acpi/video.h> /* ======= */ /* Defines */ @@ -959,7 +959,7 @@ static int __init compal_init(void) return -ENODEV; } - if (!acpi_video_backlight_support()) { + if (acpi_video_get_backlight_type() == acpi_backlight_vendor) { struct backlight_properties props; memset(&props, 0, sizeof(struct backlight_properties)); props.type = BACKLIGHT_PLATFORM; diff --git a/drivers/platform/x86/dell-laptop.c b/drivers/platform/x86/dell-laptop.c index d688d806a8a5..01d081052b50 100644 --- a/drivers/platform/x86/dell-laptop.c +++ b/drivers/platform/x86/dell-laptop.c @@ -31,6 +31,7 @@ #include <linux/slab.h> #include <linux/debugfs.h> #include <linux/seq_file.h> +#include <acpi/video.h> #include "../../firmware/dcdbas.h" #define BRIGHTNESS_TOKEN 0x7d @@ -1920,13 +1921,8 @@ static int __init dell_init(void) debugfs_create_file("rfkill", 0444, dell_laptop_dir, NULL, &dell_debugfs_fops); -#ifdef CONFIG_ACPI - /* In the event of an ACPI backlight being available, don't - * register the platform controller. - */ - if (acpi_video_backlight_support()) + if (acpi_video_get_backlight_type() != acpi_backlight_vendor) return 0; -#endif get_buffer(); buffer->input[0] = find_token_location(BRIGHTNESS_TOKEN); diff --git a/drivers/platform/x86/dell-wmi.c b/drivers/platform/x86/dell-wmi.c index 6512a06bc053..f2d77fe696ac 100644 --- a/drivers/platform/x86/dell-wmi.c +++ b/drivers/platform/x86/dell-wmi.c @@ -35,6 +35,7 @@ #include <linux/acpi.h> #include <linux/string.h> #include <linux/dmi.h> +#include <acpi/video.h> MODULE_AUTHOR("Matthew Garrett <mjg@redhat.com>"); MODULE_DESCRIPTION("Dell laptop WMI hotkeys driver"); @@ -397,7 +398,7 @@ static int __init dell_wmi_init(void) } dmi_walk(find_hk_type, NULL); - acpi_video = acpi_video_backlight_support(); + acpi_video = acpi_video_get_backlight_type() != acpi_backlight_vendor; err = dell_wmi_input_setup(); if (err) diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c index 844c2096bde9..8cdf315f9730 100644 --- a/drivers/platform/x86/eeepc-laptop.c +++ b/drivers/platform/x86/eeepc-laptop.c @@ -37,6 +37,7 @@ #include <linux/pci_hotplug.h> #include <linux/leds.h> #include <linux/dmi.h> +#include <acpi/video.h> #define EEEPC_LAPTOP_VERSION "0.1" #define EEEPC_LAPTOP_NAME "Eee PC Hotkey Driver" @@ -1433,12 +1434,10 @@ static int eeepc_acpi_add(struct acpi_device *device) if (result) goto fail_platform; - if (!acpi_video_backlight_support()) { + if (acpi_video_get_backlight_type() == acpi_backlight_vendor) { result = eeepc_backlight_init(eeepc); if (result) goto fail_backlight; - } else { - pr_info("Backlight controlled by ACPI video driver\n"); } result = eeepc_input_init(eeepc); diff --git a/drivers/platform/x86/fujitsu-laptop.c b/drivers/platform/x86/fujitsu-laptop.c index 2a9afa261c61..1c62caff93fd 100644 --- a/drivers/platform/x86/fujitsu-laptop.c +++ b/drivers/platform/x86/fujitsu-laptop.c @@ -72,6 +72,7 @@ #if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE) #include <linux/leds.h> #endif +#include <acpi/video.h> #define FUJITSU_DRIVER_VERSION "0.6.0" @@ -1099,7 +1100,7 @@ static int __init fujitsu_init(void) /* Register backlight stuff */ - if (!acpi_video_backlight_support()) { + if (acpi_video_get_backlight_type() == acpi_backlight_vendor) { struct backlight_properties props; memset(&props, 0, sizeof(struct backlight_properties)); @@ -1137,8 +1138,7 @@ static int __init fujitsu_init(void) } /* Sync backlight power status (needs FUJ02E3 device, hence deferred) */ - - if (!acpi_video_backlight_support()) { + if (acpi_video_get_backlight_type() == acpi_backlight_vendor) { if (call_fext_func(FUNC_BACKLIGHT, 0x2, 0x4, 0x0) == 3) fujitsu->bl_device->props.power = FB_BLANK_POWERDOWN; else diff --git a/drivers/platform/x86/ideapad-laptop.c b/drivers/platform/x86/ideapad-laptop.c index b496db87bc05..bea022830944 100644 --- a/drivers/platform/x86/ideapad-laptop.c +++ b/drivers/platform/x86/ideapad-laptop.c @@ -38,6 +38,7 @@ #include <linux/i8042.h> #include <linux/dmi.h> #include <linux/device.h> +#include <acpi/video.h> #define IDEAPAD_RFKILL_DEV_NUM (3) @@ -903,7 +904,7 @@ static int ideapad_acpi_add(struct platform_device *pdev) ideapad_sync_rfk_state(priv); ideapad_sync_touchpad_state(priv); - if (!acpi_video_backlight_support()) { + if (acpi_video_get_backlight_type() == acpi_backlight_vendor) { ret = ideapad_backlight_init(priv); if (ret && ret != -ENODEV) goto backlight_failed; diff --git a/drivers/platform/x86/intel_oaktrail.c b/drivers/platform/x86/intel_oaktrail.c index 8037c8b46241..6aa33c4a809f 100644 --- a/drivers/platform/x86/intel_oaktrail.c +++ b/drivers/platform/x86/intel_oaktrail.c @@ -50,6 +50,7 @@ #include <linux/platform_device.h> #include <linux/dmi.h> #include <linux/rfkill.h> +#include <acpi/video.h> #define DRIVER_NAME "intel_oaktrail" #define DRIVER_VERSION "0.4ac1" @@ -343,13 +344,11 @@ static int __init oaktrail_init(void) goto err_device_add; } - if (!acpi_video_backlight_support()) { + if (acpi_video_get_backlight_type() == acpi_backlight_vendor) { ret = oaktrail_backlight_init(); if (ret) goto err_backlight; - - } else - pr_info("Backlight controlled by ACPI video driver\n"); + } ret = oaktrail_rfkill_init(); if (ret) { diff --git a/drivers/platform/x86/msi-laptop.c b/drivers/platform/x86/msi-laptop.c index 085987730aab..42317704629d 100644 --- a/drivers/platform/x86/msi-laptop.c +++ b/drivers/platform/x86/msi-laptop.c @@ -64,6 +64,7 @@ #include <linux/i8042.h> #include <linux/input.h> #include <linux/input/sparse-keymap.h> +#include <acpi/video.h> #define MSI_DRIVER_VERSION "0.5" @@ -1069,9 +1070,8 @@ static int __init msi_init(void) /* Register backlight stuff */ - if (!quirks->old_ec_model || acpi_video_backlight_support()) { - pr_info("Brightness ignored, must be controlled by ACPI video driver\n"); - } else { + if (quirks->old_ec_model || + acpi_video_get_backlight_type() == acpi_backlight_vendor) { struct backlight_properties props; memset(&props, 0, sizeof(struct backlight_properties)); props.type = BACKLIGHT_PLATFORM; diff --git a/drivers/platform/x86/msi-wmi.c b/drivers/platform/x86/msi-wmi.c index 6d2bac0c463c..978e6d640572 100644 --- a/drivers/platform/x86/msi-wmi.c +++ b/drivers/platform/x86/msi-wmi.c @@ -29,6 +29,7 @@ #include <linux/backlight.h> #include <linux/slab.h> #include <linux/module.h> +#include <acpi/video.h> MODULE_AUTHOR("Thomas Renninger <trenn@suse.de>"); MODULE_DESCRIPTION("MSI laptop WMI hotkeys driver"); @@ -320,7 +321,8 @@ static int __init msi_wmi_init(void) break; } - if (wmi_has_guid(MSIWMI_BIOS_GUID) && !acpi_video_backlight_support()) { + if (wmi_has_guid(MSIWMI_BIOS_GUID) && + acpi_video_get_backlight_type() == acpi_backlight_vendor) { err = msi_wmi_backlight_setup(); if (err) { pr_err("Unable to setup backlight device\n"); diff --git a/drivers/platform/x86/samsung-laptop.c b/drivers/platform/x86/samsung-laptop.c index 9e701b2256f9..8c146e2b6727 100644 --- a/drivers/platform/x86/samsung-laptop.c +++ b/drivers/platform/x86/samsung-laptop.c @@ -1720,27 +1720,14 @@ static int __init samsung_init(void) samsung->handle_backlight = true; samsung->quirks = quirks; - #ifdef CONFIG_ACPI if (samsung->quirks->broken_acpi_video) - acpi_video_dmi_promote_vendor(); - - /* Don't handle backlight here if the acpi video already handle it */ - if (acpi_video_backlight_support()) { - samsung->handle_backlight = false; - } else if (samsung->quirks->broken_acpi_video) { - pr_info("Disabling ACPI video driver\n"); - acpi_video_unregister(); - } + acpi_video_set_dmi_backlight_type(acpi_backlight_vendor); + if (samsung->quirks->use_native_backlight) + acpi_video_set_dmi_backlight_type(acpi_backlight_native); - if (samsung->quirks->use_native_backlight) { - pr_info("Using native backlight driver\n"); - /* Tell acpi-video to not handle the backlight */ - acpi_video_dmi_promote_vendor(); - acpi_video_unregister(); - /* And also do not handle it ourselves */ + if (acpi_video_get_backlight_type() != acpi_backlight_vendor) samsung->handle_backlight = false; - } #endif ret = samsung_platform_init(samsung); @@ -1751,12 +1738,6 @@ static int __init samsung_init(void) if (ret) goto error_sabi; -#ifdef CONFIG_ACPI - /* Only log that if we are really on a sabi platform */ - if (acpi_video_backlight_support()) - pr_info("Backlight controlled by ACPI video driver\n"); -#endif - ret = samsung_sysfs_init(samsung); if (ret) goto error_sysfs; diff --git a/drivers/platform/x86/sony-laptop.c b/drivers/platform/x86/sony-laptop.c index e51c1e753607..aeb80d1c2b07 100644 --- a/drivers/platform/x86/sony-laptop.c +++ b/drivers/platform/x86/sony-laptop.c @@ -69,6 +69,7 @@ #include <linux/miscdevice.h> #endif #include <asm/uaccess.h> +#include <acpi/video.h> #define dprintk(fmt, ...) \ do { \ @@ -3198,12 +3199,8 @@ static int sony_nc_add(struct acpi_device *device) sony_nc_function_setup(device, sony_pf_device); } - /* setup input devices and helper fifo */ - if (acpi_video_backlight_support()) { - pr_info("brightness ignored, must be controlled by ACPI video driver\n"); - } else { + if (acpi_video_get_backlight_type() == acpi_backlight_vendor) sony_nc_backlight_setup(); - } /* create sony_pf sysfs attributes related to the SNC device */ for (item = sony_nc_values; item->name; ++item) { diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index 28f328136f0d..33e488cf5569 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -83,6 +83,7 @@ #include <sound/control.h> #include <sound/initval.h> #include <asm/uaccess.h> +#include <acpi/video.h> /* ThinkPad CMOS commands */ #define TP_CMOS_VOLUME_DOWN 0 @@ -3487,7 +3488,7 @@ static int __init hotkey_init(struct ibm_init_struct *iibm) /* Do not issue duplicate brightness change events to * userspace. tpacpi_detect_brightness_capabilities() must have * been called before this point */ - if (acpi_video_backlight_support()) { + if (acpi_video_get_backlight_type() != acpi_backlight_vendor) { pr_info("This ThinkPad has standard ACPI backlight " "brightness control, supported by the ACPI " "video driver\n"); @@ -6491,7 +6492,7 @@ static int __init brightness_init(struct ibm_init_struct *iibm) return 1; } - if (acpi_video_backlight_support()) { + if (acpi_video_get_backlight_type() != acpi_backlight_vendor) { if (brightness_enable > 1) { pr_info("Standard ACPI backlight interface " "available, not loading native one\n"); diff --git a/drivers/platform/x86/toshiba_acpi.c b/drivers/platform/x86/toshiba_acpi.c index 9956b9902bb4..59bf27ed72d6 100644 --- a/drivers/platform/x86/toshiba_acpi.c +++ b/drivers/platform/x86/toshiba_acpi.c @@ -2640,14 +2640,11 @@ static int toshiba_acpi_setup_backlight(struct toshiba_acpi_dev *dev) */ if (dev->tr_backlight_supported || dmi_check_system(toshiba_vendor_backlight_dmi)) - acpi_video_dmi_promote_vendor(); + acpi_video_set_dmi_backlight_type(acpi_backlight_vendor); - if (acpi_video_backlight_support()) + if (acpi_video_get_backlight_type() != acpi_backlight_vendor) return 0; - /* acpi-video may have loaded before we called dmi_promote_vendor() */ - acpi_video_unregister_backlight(); - memset(&props, 0, sizeof(props)); props.type = BACKLIGHT_PLATFORM; props.max_brightness = HCI_LCD_BRIGHTNESS_LEVELS - 1; diff --git a/drivers/pnp/system.c b/drivers/pnp/system.c index 49c1720df59a..515f33882ab8 100644 --- a/drivers/pnp/system.c +++ b/drivers/pnp/system.c @@ -7,6 +7,7 @@ * Bjorn Helgaas <bjorn.helgaas@hp.com> */ +#include <linux/acpi.h> #include <linux/pnp.h> #include <linux/device.h> #include <linux/init.h> @@ -22,25 +23,41 @@ static const struct pnp_device_id pnp_dev_table[] = { {"", 0} }; +#ifdef CONFIG_ACPI +static bool __reserve_range(u64 start, unsigned int length, bool io, char *desc) +{ + u8 space_id = io ? ACPI_ADR_SPACE_SYSTEM_IO : ACPI_ADR_SPACE_SYSTEM_MEMORY; + return !acpi_reserve_region(start, length, space_id, IORESOURCE_BUSY, desc); +} +#else +static bool __reserve_range(u64 start, unsigned int length, bool io, char *desc) +{ + struct resource *res; + + res = io ? request_region(start, length, desc) : + request_mem_region(start, length, desc); + if (res) { + res->flags &= ~IORESOURCE_BUSY; + return true; + } + return false; +} +#endif + static void reserve_range(struct pnp_dev *dev, struct resource *r, int port) { char *regionid; const char *pnpid = dev_name(&dev->dev); resource_size_t start = r->start, end = r->end; - struct resource *res; + bool reserved; regionid = kmalloc(16, GFP_KERNEL); if (!regionid) return; snprintf(regionid, 16, "pnp %s", pnpid); - if (port) - res = request_region(start, end - start + 1, regionid); - else - res = request_mem_region(start, end - start + 1, regionid); - if (res) - res->flags &= ~IORESOURCE_BUSY; - else + reserved = __reserve_range(start, end - start + 1, !!port, regionid); + if (!reserved) kfree(regionid); /* @@ -49,7 +66,7 @@ static void reserve_range(struct pnp_dev *dev, struct resource *r, int port) * have double reservations. */ dev_info(&dev->dev, "%pR %s reserved\n", r, - res ? "has been" : "could not be"); + reserved ? "has been" : "could not be"); } static void reserve_resources_of_dev(struct pnp_dev *dev) diff --git a/drivers/xen/xen-acpi-cpuhotplug.c b/drivers/xen/xen-acpi-cpuhotplug.c index 3e62ee4b3b66..f4a369429553 100644 --- a/drivers/xen/xen-acpi-cpuhotplug.c +++ b/drivers/xen/xen-acpi-cpuhotplug.c @@ -46,13 +46,7 @@ static int xen_acpi_processor_enable(struct acpi_device *device) unsigned long long value; union acpi_object object = { 0 }; struct acpi_buffer buffer = { sizeof(union acpi_object), &object }; - struct acpi_processor *pr; - - pr = acpi_driver_data(device); - if (!pr) { - pr_err(PREFIX "Cannot find driver data\n"); - return -EINVAL; - } + struct acpi_processor *pr = acpi_driver_data(device); if (!strcmp(acpi_device_hid(device), ACPI_PROCESSOR_OBJECT_HID)) { /* Declared with "Processor" statement; match ProcessorID */ @@ -77,7 +71,7 @@ static int xen_acpi_processor_enable(struct acpi_device *device) pr->id = xen_pcpu_id(pr->acpi_id); - if ((int)pr->id < 0) + if (invalid_logical_cpuid(pr->id)) /* This cpu is not presented at hypervisor, try to hotadd it */ if (ACPI_FAILURE(xen_acpi_cpu_hotadd(pr))) { pr_err(PREFIX "Hotadd CPU (acpi_id = %d) failed.\n", @@ -226,7 +220,7 @@ static acpi_status xen_acpi_cpu_hotadd(struct acpi_processor *pr) return AE_ERROR; pr->id = xen_hotadd_cpu(pr); - if ((int)pr->id < 0) + if (invalid_logical_cpuid(pr->id)) return AE_ERROR; /* |