summaryrefslogtreecommitdiff
path: root/include/linux/rmi.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/linux/rmi.h')
-rw-r--r--include/linux/rmi.h60
1 files changed, 39 insertions, 21 deletions
diff --git a/include/linux/rmi.h b/include/linux/rmi.h
index e0aca1476001..64125443f8a6 100644
--- a/include/linux/rmi.h
+++ b/include/linux/rmi.h
@@ -13,6 +13,7 @@
#include <linux/device.h>
#include <linux/interrupt.h>
#include <linux/input.h>
+#include <linux/kfifo.h>
#include <linux/list.h>
#include <linux/module.h>
#include <linux/types.h>
@@ -99,6 +100,8 @@ struct rmi_2d_sensor_platform_data {
bool topbuttonpad;
bool kernel_tracking;
int dmax;
+ int dribble;
+ int palm_detect;
};
/**
@@ -106,7 +109,7 @@ struct rmi_2d_sensor_platform_data {
* @buttonpad - the touchpad is a buttonpad, so enable only the first actual
* button that is found.
* @trackstick_buttons - Set when the function 30 is handling the physical
- * buttons of the trackstick (as a PD/2 passthrough device.
+ * buttons of the trackstick (as a PS/2 passthrough device).
* @disable - the touchpad incorrectly reports F30 and it should be ignored.
* This is a special case which is due to misconfigured firmware.
*/
@@ -116,14 +119,17 @@ struct rmi_f30_data {
bool disable;
};
-/**
- * struct rmi_f01_power - override default power management settings.
- *
+
+/*
+ * Set the state of a register
+ * DEFAULT - use the default value set by the firmware config
+ * OFF - explicitly disable the register
+ * ON - explicitly enable the register
*/
-enum rmi_f01_nosleep {
- RMI_F01_NOSLEEP_DEFAULT = 0,
- RMI_F01_NOSLEEP_OFF = 1,
- RMI_F01_NOSLEEP_ON = 2
+enum rmi_reg_state {
+ RMI_REG_STATE_DEFAULT = 0,
+ RMI_REG_STATE_OFF = 1,
+ RMI_REG_STATE_ON = 2
};
/**
@@ -143,7 +149,7 @@ enum rmi_f01_nosleep {
* when the touch sensor is in doze mode, in units of 10ms.
*/
struct rmi_f01_power_management {
- enum rmi_f01_nosleep nosleep;
+ enum rmi_reg_state nosleep;
u8 wakeup_threshold;
u8 doze_holdoff;
u8 doze_interval;
@@ -204,16 +210,18 @@ struct rmi_device_platform_data_spi {
* @reset_delay_ms - after issuing a reset command to the touch sensor, the
* driver waits a few milliseconds to give the firmware a chance to
* to re-initialize. You can override the default wait period here.
+ * @irq: irq associated with the attn gpio line, or negative
*/
struct rmi_device_platform_data {
int reset_delay_ms;
+ int irq;
struct rmi_device_platform_data_spi spi_data;
/* function handler pdata */
- struct rmi_2d_sensor_platform_data *sensor_pdata;
+ struct rmi_2d_sensor_platform_data sensor_pdata;
struct rmi_f01_power_management power_management;
- struct rmi_f30_data *f30_data;
+ struct rmi_f30_data f30_data;
};
/**
@@ -264,9 +272,6 @@ struct rmi_transport_dev {
struct rmi_device_platform_data pdata;
struct input_dev *input;
-
- void *attn_data;
- int attn_size;
};
/**
@@ -324,17 +329,24 @@ struct rmi_device {
};
+struct rmi4_attn_data {
+ unsigned long irq_status;
+ size_t size;
+ void *data;
+};
+
struct rmi_driver_data {
struct list_head function_list;
struct rmi_device *rmi_dev;
struct rmi_function *f01_container;
- bool f01_bootloader_mode;
+ struct rmi_function *f34_container;
+ bool bootloader_mode;
- u32 attn_count;
int num_of_irq_regs;
int irq_count;
+ void *irq_memory;
unsigned long *irq_status;
unsigned long *fn_irq_bits;
unsigned long *current_irq_mask;
@@ -343,17 +355,23 @@ struct rmi_driver_data {
struct input_dev *input;
u8 pdt_props;
- u8 bsr;
+
+ u8 num_rx_electrodes;
+ u8 num_tx_electrodes;
bool enabled;
+ struct mutex enabled_mutex;
- void *data;
+ struct rmi4_attn_data attn_data;
+ DECLARE_KFIFO(attn_fifo, struct rmi4_attn_data, 16);
};
int rmi_register_transport_device(struct rmi_transport_dev *xport);
void rmi_unregister_transport_device(struct rmi_transport_dev *xport);
-int rmi_process_interrupt_requests(struct rmi_device *rmi_dev);
-int rmi_driver_suspend(struct rmi_device *rmi_dev);
-int rmi_driver_resume(struct rmi_device *rmi_dev);
+void rmi_set_attn_data(struct rmi_device *rmi_dev, unsigned long irq_status,
+ void *data, size_t size);
+
+int rmi_driver_suspend(struct rmi_device *rmi_dev, bool enable_wake);
+int rmi_driver_resume(struct rmi_device *rmi_dev, bool clear_wake);
#endif