diff options
Diffstat (limited to 'include/linux')
46 files changed, 683 insertions, 88 deletions
diff --git a/include/linux/Kbuild b/include/linux/Kbuild index 75cf611641e6..cb1ded2bd545 100644 --- a/include/linux/Kbuild +++ b/include/linux/Kbuild @@ -372,6 +372,7 @@ header-y += unistd.h header-y += usbdevice_fs.h header-y += utime.h header-y += utsname.h +header-y += uvcvideo.h header-y += v4l2-mediabus.h header-y += v4l2-subdev.h header-y += veth.h diff --git a/include/linux/binfmts.h b/include/linux/binfmts.h index c3d6512eded1..8845613fd7e3 100644 --- a/include/linux/binfmts.h +++ b/include/linux/binfmts.h @@ -60,10 +60,6 @@ struct linux_binprm { unsigned long loader, exec; }; -extern void acct_arg_size(struct linux_binprm *bprm, unsigned long pages); -extern struct page *get_arg_page(struct linux_binprm *bprm, unsigned long pos, - int write); - #define BINPRM_FLAGS_ENFORCE_NONDUMP_BIT 0 #define BINPRM_FLAGS_ENFORCE_NONDUMP (1 << BINPRM_FLAGS_ENFORCE_NONDUMP_BIT) diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h index c918fbd33ee5..d4646b48dc4a 100644 --- a/include/linux/clocksource.h +++ b/include/linux/clocksource.h @@ -337,6 +337,14 @@ static inline void update_vsyscall_tz(void) extern void timekeeping_notify(struct clocksource *clock); +extern cycle_t clocksource_mmio_readl_up(struct clocksource *); +extern cycle_t clocksource_mmio_readl_down(struct clocksource *); +extern cycle_t clocksource_mmio_readw_up(struct clocksource *); +extern cycle_t clocksource_mmio_readw_down(struct clocksource *); + +extern int clocksource_mmio_init(void __iomem *, const char *, + unsigned long, int, unsigned, cycle_t (*)(struct clocksource *)); + extern int clocksource_i8253_init(void); #endif /* _LINUX_CLOCKSOURCE_H */ diff --git a/include/linux/dvb/frontend.h b/include/linux/dvb/frontend.h index 493a2bf85f62..36a3ed63f571 100644 --- a/include/linux/dvb/frontend.h +++ b/include/linux/dvb/frontend.h @@ -175,14 +175,20 @@ typedef enum fe_transmit_mode { TRANSMISSION_MODE_2K, TRANSMISSION_MODE_8K, TRANSMISSION_MODE_AUTO, - TRANSMISSION_MODE_4K + TRANSMISSION_MODE_4K, + TRANSMISSION_MODE_1K, + TRANSMISSION_MODE_16K, + TRANSMISSION_MODE_32K, } fe_transmit_mode_t; typedef enum fe_bandwidth { BANDWIDTH_8_MHZ, BANDWIDTH_7_MHZ, BANDWIDTH_6_MHZ, - BANDWIDTH_AUTO + BANDWIDTH_AUTO, + BANDWIDTH_5_MHZ, + BANDWIDTH_10_MHZ, + BANDWIDTH_1_712_MHZ, } fe_bandwidth_t; @@ -191,7 +197,10 @@ typedef enum fe_guard_interval { GUARD_INTERVAL_1_16, GUARD_INTERVAL_1_8, GUARD_INTERVAL_1_4, - GUARD_INTERVAL_AUTO + GUARD_INTERVAL_AUTO, + GUARD_INTERVAL_1_128, + GUARD_INTERVAL_19_128, + GUARD_INTERVAL_19_256, } fe_guard_interval_t; @@ -305,7 +314,9 @@ struct dvb_frontend_event { #define DTV_ISDBS_TS_ID 42 -#define DTV_MAX_COMMAND DTV_ISDBS_TS_ID +#define DTV_DVBT2_PLP_ID 43 + +#define DTV_MAX_COMMAND DTV_DVBT2_PLP_ID typedef enum fe_pilot { PILOT_ON, @@ -337,6 +348,7 @@ typedef enum fe_delivery_system { SYS_DMBTH, SYS_CMMB, SYS_DAB, + SYS_DVBT2, } fe_delivery_system_t; struct dtv_cmds_h { diff --git a/include/linux/dvb/version.h b/include/linux/dvb/version.h index 5a7546c12688..1421cc84afaa 100644 --- a/include/linux/dvb/version.h +++ b/include/linux/dvb/version.h @@ -24,6 +24,6 @@ #define _DVBVERSION_H_ #define DVB_API_VERSION 5 -#define DVB_API_VERSION_MINOR 2 +#define DVB_API_VERSION_MINOR 3 #endif /*_DVBVERSION_H_*/ diff --git a/include/linux/elf.h b/include/linux/elf.h index 4d608014753a..110821cb6ea5 100644 --- a/include/linux/elf.h +++ b/include/linux/elf.h @@ -395,6 +395,7 @@ typedef struct elf64_shdr { #define NT_S390_CTRS 0x304 /* s390 control registers */ #define NT_S390_PREFIX 0x305 /* s390 prefix register */ #define NT_S390_LAST_BREAK 0x306 /* s390 breaking event address */ +#define NT_ARM_VFP 0x400 /* ARM VFP/NEON registers */ /* Note header in a PT_NOTE section */ diff --git a/include/linux/filter.h b/include/linux/filter.h index 4609b85e559d..9ee3f9fb0b4a 100644 --- a/include/linux/filter.h +++ b/include/linux/filter.h @@ -131,6 +131,10 @@ struct sock_fprog { /* Required for SO_ATTACH_FILTER. */ #define SKF_LL_OFF (-0x200000) #ifdef __KERNEL__ + +struct sk_buff; +struct sock; + struct sk_filter { atomic_t refcnt; @@ -146,9 +150,6 @@ static inline unsigned int sk_filter_len(const struct sk_filter *fp) return fp->len * sizeof(struct sock_filter) + sizeof(*fp); } -struct sk_buff; -struct sock; - extern int sk_filter(struct sock *sk, struct sk_buff *skb); extern unsigned int sk_run_filter(const struct sk_buff *skb, const struct sock_filter *filter); diff --git a/include/linux/fsl_devices.h b/include/linux/fsl_devices.h index 4eb56ed75fbc..fffdf00f87b9 100644 --- a/include/linux/fsl_devices.h +++ b/include/linux/fsl_devices.h @@ -72,6 +72,7 @@ struct fsl_usb2_platform_data { void (*exit)(struct platform_device *); void __iomem *regs; /* ioremap'd register base */ struct clk *clk; + unsigned power_budget; /* hcd->power_budget */ unsigned big_endian_mmio:1; unsigned big_endian_desc:1; unsigned es:1; /* need USBMODE:ES */ @@ -79,6 +80,21 @@ struct fsl_usb2_platform_data { unsigned have_sysif_regs:1; unsigned invert_drvvbus:1; unsigned invert_pwr_fault:1; + + unsigned suspended:1; + unsigned already_suspended:1; + + /* register save area for suspend/resume */ + u32 pm_command; + u32 pm_status; + u32 pm_intr_enable; + u32 pm_frame_index; + u32 pm_segment; + u32 pm_frame_list; + u32 pm_async_next; + u32 pm_configured_flag; + u32 pm_portsc; + u32 pm_usbgenctrl; }; /* Flags in fsl_usb2_mph_platform_data */ diff --git a/include/linux/hrtimer.h b/include/linux/hrtimer.h index 62f500c724f9..51932e5acf7c 100644 --- a/include/linux/hrtimer.h +++ b/include/linux/hrtimer.h @@ -143,19 +143,18 @@ struct hrtimer_sleeper { */ struct hrtimer_clock_base { struct hrtimer_cpu_base *cpu_base; - clockid_t index; + int index; + clockid_t clockid; struct timerqueue_head active; ktime_t resolution; ktime_t (*get_time)(void); ktime_t softirq_time; -#ifdef CONFIG_HIGH_RES_TIMERS ktime_t offset; -#endif }; enum hrtimer_base_type { - HRTIMER_BASE_REALTIME, HRTIMER_BASE_MONOTONIC, + HRTIMER_BASE_REALTIME, HRTIMER_BASE_BOOTTIME, HRTIMER_MAX_CLOCK_BASES, }; @@ -164,7 +163,7 @@ enum hrtimer_base_type { * struct hrtimer_cpu_base - the per cpu clock bases * @lock: lock protecting the base and associated clock bases * and timers - * @clock_base: array of clock bases for this cpu + * @active_bases: Bitfield to mark bases with active timers * @expires_next: absolute time of the next event which was scheduled * via clock_set_next_event() * @hres_active: State of high resolution mode @@ -173,10 +172,11 @@ enum hrtimer_base_type { * @nr_retries: Total number of hrtimer interrupt retries * @nr_hangs: Total number of hrtimer interrupt hangs * @max_hang_time: Maximum time spent in hrtimer_interrupt + * @clock_base: array of clock bases for this cpu */ struct hrtimer_cpu_base { raw_spinlock_t lock; - struct hrtimer_clock_base clock_base[HRTIMER_MAX_CLOCK_BASES]; + unsigned long active_bases; #ifdef CONFIG_HIGH_RES_TIMERS ktime_t expires_next; int hres_active; @@ -186,6 +186,7 @@ struct hrtimer_cpu_base { unsigned long nr_hangs; ktime_t max_hang_time; #endif + struct hrtimer_clock_base clock_base[HRTIMER_MAX_CLOCK_BASES]; }; static inline void hrtimer_set_expires(struct hrtimer *timer, ktime_t time) @@ -256,8 +257,6 @@ static inline ktime_t hrtimer_expires_remaining(const struct hrtimer *timer) #ifdef CONFIG_HIGH_RES_TIMERS struct clock_event_device; -extern void clock_was_set(void); -extern void hres_timers_resume(void); extern void hrtimer_interrupt(struct clock_event_device *dev); /* @@ -291,16 +290,8 @@ extern void hrtimer_peek_ahead_timers(void); # define MONOTONIC_RES_NSEC LOW_RES_NSEC # define KTIME_MONOTONIC_RES KTIME_LOW_RES -/* - * clock_was_set() is a NOP for non- high-resolution systems. The - * time-sorted order guarantees that a timer does not expire early and - * is expired in the next softirq when the clock was advanced. - */ -static inline void clock_was_set(void) { } static inline void hrtimer_peek_ahead_timers(void) { } -static inline void hres_timers_resume(void) { } - /* * In non high resolution mode the time reference is taken from * the base softirq time variable. @@ -316,10 +307,18 @@ static inline int hrtimer_is_hres_active(struct hrtimer *timer) } #endif +extern void clock_was_set(void); +#ifdef CONFIG_TIMERFD +extern void timerfd_clock_was_set(void); +#else +static inline void timerfd_clock_was_set(void) { } +#endif +extern void hrtimers_resume(void); + extern ktime_t ktime_get(void); extern ktime_t ktime_get_real(void); extern ktime_t ktime_get_boottime(void); - +extern ktime_t ktime_get_monotonic_offset(void); DECLARE_PER_CPU(struct tick_device, tick_cpu_device); diff --git a/include/linux/ide.h b/include/linux/ide.h index 072fe8c93e6f..42557851b12e 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -18,13 +18,13 @@ #include <linux/pci.h> #include <linux/completion.h> #include <linux/pm.h> +#include <linux/mutex.h> #ifdef CONFIG_BLK_DEV_IDEACPI #include <acpi/acpi.h> #endif #include <asm/byteorder.h> #include <asm/system.h> #include <asm/io.h> -#include <asm/mutex.h> /* for request_sense */ #include <linux/cdrom.h> diff --git a/include/linux/kvm.h b/include/linux/kvm.h index ea2dc1a2e13d..55ef181521ff 100644 --- a/include/linux/kvm.h +++ b/include/linux/kvm.h @@ -541,6 +541,9 @@ struct kvm_ppc_pvinfo { #define KVM_CAP_PPC_GET_PVINFO 57 #define KVM_CAP_PPC_IRQ_LEVEL 58 #define KVM_CAP_ASYNC_PF 59 +#define KVM_CAP_TSC_CONTROL 60 +#define KVM_CAP_GET_TSC_KHZ 61 +#define KVM_CAP_PPC_BOOKE_SREGS 62 #ifdef KVM_CAP_IRQ_ROUTING @@ -677,6 +680,9 @@ struct kvm_clock_data { #define KVM_SET_PIT2 _IOW(KVMIO, 0xa0, struct kvm_pit_state2) /* Available with KVM_CAP_PPC_GET_PVINFO */ #define KVM_PPC_GET_PVINFO _IOW(KVMIO, 0xa1, struct kvm_ppc_pvinfo) +/* Available with KVM_CAP_TSC_CONTROL */ +#define KVM_SET_TSC_KHZ _IO(KVMIO, 0xa2) +#define KVM_GET_TSC_KHZ _IO(KVMIO, 0xa3) /* * ioctls for vcpu fds diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h index ab428552af8e..31ebb59cbd2f 100644 --- a/include/linux/kvm_host.h +++ b/include/linux/kvm_host.h @@ -27,6 +27,10 @@ #include <asm/kvm_host.h> +#ifndef KVM_MMIO_SIZE +#define KVM_MMIO_SIZE 8 +#endif + /* * vcpu->requests bit members */ @@ -43,7 +47,6 @@ #define KVM_REQ_DEACTIVATE_FPU 10 #define KVM_REQ_EVENT 11 #define KVM_REQ_APF_HALT 12 -#define KVM_REQ_NMI 13 #define KVM_USERSPACE_IRQ_SOURCE_ID 0 @@ -133,7 +136,8 @@ struct kvm_vcpu { int mmio_read_completed; int mmio_is_write; int mmio_size; - unsigned char mmio_data[8]; + int mmio_index; + unsigned char mmio_data[KVM_MMIO_SIZE]; gpa_t mmio_phys_addr; #endif @@ -292,9 +296,10 @@ static inline struct kvm_vcpu *kvm_get_vcpu(struct kvm *kvm, int i) } #define kvm_for_each_vcpu(idx, vcpup, kvm) \ - for (idx = 0, vcpup = kvm_get_vcpu(kvm, idx); \ - idx < atomic_read(&kvm->online_vcpus) && vcpup; \ - vcpup = kvm_get_vcpu(kvm, ++idx)) + for (idx = 0; \ + idx < atomic_read(&kvm->online_vcpus) && \ + (vcpup = kvm_get_vcpu(kvm, idx)) != NULL; \ + idx++) int kvm_vcpu_init(struct kvm_vcpu *vcpu, struct kvm *kvm, unsigned id); void kvm_vcpu_uninit(struct kvm_vcpu *vcpu); @@ -365,7 +370,6 @@ pfn_t gfn_to_pfn_prot(struct kvm *kvm, gfn_t gfn, bool write_fault, bool *writable); pfn_t gfn_to_pfn_memslot(struct kvm *kvm, struct kvm_memory_slot *slot, gfn_t gfn); -int memslot_id(struct kvm *kvm, gfn_t gfn); void kvm_release_pfn_dirty(pfn_t); void kvm_release_pfn_clean(pfn_t pfn); void kvm_set_pfn_dirty(pfn_t pfn); @@ -513,6 +517,7 @@ struct kvm_assigned_dev_kernel { struct kvm *kvm; spinlock_t intx_lock; char irq_name[32]; + struct pci_saved_state *pci_saved_state; }; struct kvm_irq_mask_notifier { @@ -587,8 +592,17 @@ static inline int kvm_deassign_device(struct kvm *kvm, static inline void kvm_guest_enter(void) { + BUG_ON(preemptible()); account_system_vtime(current); current->flags |= PF_VCPU; + /* KVM does not hold any references to rcu protected data when it + * switches CPU into a guest mode. In fact switching to a guest mode + * is very similar to exiting to userspase from rcu point of view. In + * addition CPU may stay in a guest mode for quite a long time (up to + * one time slice). Lets treat guest mode as quiescent state, just like + * we do with user-mode execution. + */ + rcu_virt_note_context_switch(smp_processor_id()); } static inline void kvm_guest_exit(void) @@ -597,6 +611,11 @@ static inline void kvm_guest_exit(void) current->flags &= ~PF_VCPU; } +static inline int memslot_id(struct kvm *kvm, gfn_t gfn) +{ + return gfn_to_memslot(kvm, gfn)->id; +} + static inline unsigned long gfn_to_hva_memslot(struct kvm_memory_slot *slot, gfn_t gfn) { diff --git a/include/linux/leds-regulator.h b/include/linux/leds-regulator.h index 5a8eb389aab8..e2337a8c90b0 100644 --- a/include/linux/leds-regulator.h +++ b/include/linux/leds-regulator.h @@ -16,7 +16,7 @@ * Use "vled" as supply id when declaring the regulator consumer: * * static struct regulator_consumer_supply pcap_regulator_VVIB_consumers [] = { - * { .dev_name = "leds-regulator.0", supply = "vled" }, + * { .dev_name = "leds-regulator.0", .supply = "vled" }, * }; * * If you have several regulator driven LEDs, you can append a numerical id to diff --git a/include/linux/mfd/wm8994/pdata.h b/include/linux/mfd/wm8994/pdata.h index 466b1c777aff..d12f8d635a81 100644 --- a/include/linux/mfd/wm8994/pdata.h +++ b/include/linux/mfd/wm8994/pdata.h @@ -32,6 +32,10 @@ struct wm8994_ldo_pdata { #define WM8994_EQ_REGS 20 #define WM8958_MBC_CUTOFF_REGS 20 #define WM8958_MBC_COEFF_REGS 48 +#define WM8958_MBC_COMBINED_REGS 56 +#define WM8958_VSS_HPF_REGS 2 +#define WM8958_VSS_REGS 148 +#define WM8958_ENH_EQ_REGS 32 /** * DRC configurations are specified with a label and a set of register @@ -71,6 +75,42 @@ struct wm8958_mbc_cfg { const char *name; u16 cutoff_regs[WM8958_MBC_CUTOFF_REGS]; u16 coeff_regs[WM8958_MBC_COEFF_REGS]; + + /* Coefficient layout when using MBC+VSS firmware */ + u16 combined_regs[WM8958_MBC_COMBINED_REGS]; +}; + +/** + * VSS HPF configurations are specified with a label and two values to + * write. Configurations are expected to be generated using the + * multiband compressor configuration panel in WISCE - see + * http://www.wolfsonmicro.com/wisce/ + */ +struct wm8958_vss_hpf_cfg { + const char *name; + u16 regs[WM8958_VSS_HPF_REGS]; +}; + +/** + * VSS configurations are specified with a label and array of values + * to write. Configurations are expected to be generated using the + * multiband compressor configuration panel in WISCE - see + * http://www.wolfsonmicro.com/wisce/ + */ +struct wm8958_vss_cfg { + const char *name; + u16 regs[WM8958_VSS_REGS]; +}; + +/** + * Enhanced EQ configurations are specified with a label and array of + * values to write. Configurations are expected to be generated using + * the multiband compressor configuration panel in WISCE - see + * http://www.wolfsonmicro.com/wisce/ + */ +struct wm8958_enh_eq_cfg { + const char *name; + u16 regs[WM8958_ENH_EQ_REGS]; }; struct wm8994_pdata { @@ -95,6 +135,15 @@ struct wm8994_pdata { int num_mbc_cfgs; struct wm8958_mbc_cfg *mbc_cfgs; + int num_vss_cfgs; + struct wm8958_vss_cfg *vss_cfgs; + + int num_vss_hpf_cfgs; + struct wm8958_vss_hpf_cfg *vss_hpf_cfgs; + + int num_enh_eq_cfgs; + struct wm8958_enh_eq_cfg *enh_eq_cfgs; + /* LINEOUT can be differential or single ended */ unsigned int lineout1_diff:1; unsigned int lineout2_diff:1; diff --git a/include/linux/mtd/physmap.h b/include/linux/mtd/physmap.h index bcfd9f777454..49b959029417 100644 --- a/include/linux/mtd/physmap.h +++ b/include/linux/mtd/physmap.h @@ -22,7 +22,9 @@ struct map_info; struct physmap_flash_data { unsigned int width; - void (*set_vpp)(struct map_info *, int); + int (*init)(struct platform_device *); + void (*exit)(struct platform_device *); + void (*set_vpp)(struct platform_device *, int); unsigned int nr_parts; unsigned int pfow_base; char *probe_type; diff --git a/include/linux/nilfs2_fs.h b/include/linux/nilfs2_fs.h index 8768c469e93e..7454ad7451b4 100644 --- a/include/linux/nilfs2_fs.h +++ b/include/linux/nilfs2_fs.h @@ -107,7 +107,7 @@ struct nilfs_super_root { #define NILFS_SR_DAT_OFFSET(inode_size) NILFS_SR_MDT_OFFSET(inode_size, 0) #define NILFS_SR_CPFILE_OFFSET(inode_size) NILFS_SR_MDT_OFFSET(inode_size, 1) #define NILFS_SR_SUFILE_OFFSET(inode_size) NILFS_SR_MDT_OFFSET(inode_size, 2) -#define NILFS_SR_BYTES (sizeof(struct nilfs_super_root)) +#define NILFS_SR_BYTES(inode_size) NILFS_SR_MDT_OFFSET(inode_size, 3) /* * Maximal mount counts @@ -845,5 +845,7 @@ struct nilfs_bdesc { _IOR(NILFS_IOCTL_IDENT, 0x8A, __u64) #define NILFS_IOCTL_RESIZE \ _IOW(NILFS_IOCTL_IDENT, 0x8B, __u64) +#define NILFS_IOCTL_SET_ALLOC_RANGE \ + _IOW(NILFS_IOCTL_IDENT, 0x8C, __u64[2]) #endif /* _LINUX_NILFS_FS_H */ diff --git a/include/linux/nmi.h b/include/linux/nmi.h index c536f8545f74..2d304efc89df 100644 --- a/include/linux/nmi.h +++ b/include/linux/nmi.h @@ -45,11 +45,12 @@ static inline bool trigger_all_cpu_backtrace(void) #ifdef CONFIG_LOCKUP_DETECTOR int hw_nmi_is_cpu_stuck(struct pt_regs *); -u64 hw_nmi_get_sample_period(void); +u64 hw_nmi_get_sample_period(int watchdog_thresh); extern int watchdog_enabled; +extern int watchdog_thresh; struct ctl_table; -extern int proc_dowatchdog_enabled(struct ctl_table *, int , - void __user *, size_t *, loff_t *); +extern int proc_dowatchdog(struct ctl_table *, int , + void __user *, size_t *, loff_t *); #endif #endif diff --git a/include/linux/notifier.h b/include/linux/notifier.h index 621dfa16acc0..c0688b0168b3 100644 --- a/include/linux/notifier.h +++ b/include/linux/notifier.h @@ -209,8 +209,9 @@ static inline int notifier_to_errno(int ret) #define NETDEV_POST_TYPE_CHANGE 0x000F #define NETDEV_POST_INIT 0x0010 #define NETDEV_UNREGISTER_BATCH 0x0011 -#define NETDEV_BONDING_DESLAVE 0x0012 +#define NETDEV_RELEASE 0x0012 #define NETDEV_NOTIFY_PEERS 0x0013 +#define NETDEV_JOIN 0x0014 #define SYS_DOWN 0x0001 /* Notify of system down */ #define SYS_RESTART SYS_DOWN diff --git a/include/linux/pci-aspm.h b/include/linux/pci-aspm.h index 67cb3ae38016..7cea7b6c1413 100644 --- a/include/linux/pci-aspm.h +++ b/include/linux/pci-aspm.h @@ -28,6 +28,7 @@ extern void pcie_aspm_exit_link_state(struct pci_dev *pdev); extern void pcie_aspm_pm_state_change(struct pci_dev *pdev); extern void pcie_aspm_powersave_config_link(struct pci_dev *pdev); extern void pci_disable_link_state(struct pci_dev *pdev, int state); +extern void pci_disable_link_state_locked(struct pci_dev *pdev, int state); extern void pcie_clear_aspm(void); extern void pcie_no_aspm(void); #else diff --git a/include/linux/pci.h b/include/linux/pci.h index 96f70d7e058d..4604d1d5514d 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -214,12 +214,17 @@ enum pci_bus_speed { PCI_SPEED_UNKNOWN = 0xff, }; -struct pci_cap_saved_state { - struct hlist_node next; +struct pci_cap_saved_data { char cap_nr; + unsigned int size; u32 data[0]; }; +struct pci_cap_saved_state { + struct hlist_node next; + struct pci_cap_saved_data cap; +}; + struct pcie_link_state; struct pci_vpd; struct pci_sriov; @@ -366,7 +371,7 @@ static inline struct pci_cap_saved_state *pci_find_saved_cap( struct hlist_node *pos; hlist_for_each_entry(tmp, pos, &pci_dev->saved_cap_space, next) { - if (tmp->cap_nr == cap) + if (tmp->cap.cap_nr == cap) return tmp; } return NULL; @@ -807,6 +812,10 @@ size_t pci_get_rom_size(struct pci_dev *pdev, void __iomem *rom, size_t size); /* Power management related routines */ int pci_save_state(struct pci_dev *dev); void pci_restore_state(struct pci_dev *dev); +struct pci_saved_state *pci_store_saved_state(struct pci_dev *dev); +int pci_load_saved_state(struct pci_dev *dev, struct pci_saved_state *state); +int pci_load_and_free_saved_state(struct pci_dev *dev, + struct pci_saved_state **state); int __pci_complete_power_transition(struct pci_dev *dev, pci_power_t state); int pci_set_power_state(struct pci_dev *dev, pci_power_t state); pci_power_t pci_choose_state(struct pci_dev *dev, pm_message_t state); @@ -828,6 +837,23 @@ static inline int pci_enable_wake(struct pci_dev *dev, pci_power_t state, return __pci_enable_wake(dev, state, false, enable); } +#define PCI_EXP_IDO_REQUEST (1<<0) +#define PCI_EXP_IDO_COMPLETION (1<<1) +void pci_enable_ido(struct pci_dev *dev, unsigned long type); +void pci_disable_ido(struct pci_dev *dev, unsigned long type); + +enum pci_obff_signal_type { + PCI_EXP_OBFF_SIGNAL_L0, + PCI_EXP_OBFF_SIGNAL_ALWAYS, +}; +int pci_enable_obff(struct pci_dev *dev, enum pci_obff_signal_type); +void pci_disable_obff(struct pci_dev *dev); + +bool pci_ltr_supported(struct pci_dev *dev); +int pci_enable_ltr(struct pci_dev *dev); +void pci_disable_ltr(struct pci_dev *dev); +int pci_set_ltr(struct pci_dev *dev, int snoop_lat_ns, int nosnoop_lat_ns); + /* For use by arch with custom probe code */ void set_pcie_port_type(struct pci_dev *pdev); void set_pcie_hotplug_bridge(struct pci_dev *pdev); @@ -1207,6 +1233,23 @@ static inline int pci_enable_wake(struct pci_dev *dev, pci_power_t state, return 0; } +static inline void pci_enable_ido(struct pci_dev *dev, unsigned long type) +{ +} + +static inline void pci_disable_ido(struct pci_dev *dev, unsigned long type) +{ +} + +static inline int pci_enable_obff(struct pci_dev *dev, unsigned long type) +{ + return 0; +} + +static inline void pci_disable_obff(struct pci_dev *dev) +{ +} + static inline int pci_request_regions(struct pci_dev *dev, const char *res_name) { return -EIO; diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 8652a4fa3fe2..24787b751286 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2483,6 +2483,8 @@ #define PCI_DEVICE_ID_INTEL_COUGARPOINT_LPC_MAX 0x1c5f #define PCI_DEVICE_ID_INTEL_PATSBURG_LPC_0 0x1d40 #define PCI_DEVICE_ID_INTEL_PATSBURG_LPC_1 0x1d41 +#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_MIN 0x1e40 +#define PCI_DEVICE_ID_INTEL_PANTHERPOINT_LPC_MAX 0x1e5f #define PCI_DEVICE_ID_INTEL_DH89XXCC_LPC_MIN 0x2310 #define PCI_DEVICE_ID_INTEL_DH89XXCC_LPC_MAX 0x231f #define PCI_DEVICE_ID_INTEL_82801AA_0 0x2410 diff --git a/include/linux/pci_regs.h b/include/linux/pci_regs.h index be01380f798a..e8840964aca1 100644 --- a/include/linux/pci_regs.h +++ b/include/linux/pci_regs.h @@ -508,8 +508,18 @@ #define PCI_EXP_RTSTA_PENDING 0x20000 /* PME pending */ #define PCI_EXP_DEVCAP2 36 /* Device Capabilities 2 */ #define PCI_EXP_DEVCAP2_ARI 0x20 /* Alternative Routing-ID */ +#define PCI_EXP_DEVCAP2_LTR 0x800 /* Latency tolerance reporting */ +#define PCI_EXP_OBFF_MASK 0xc0000 /* OBFF support mechanism */ +#define PCI_EXP_OBFF_MSG 0x40000 /* New message signaling */ +#define PCI_EXP_OBFF_WAKE 0x80000 /* Re-use WAKE# for OBFF */ #define PCI_EXP_DEVCTL2 40 /* Device Control 2 */ #define PCI_EXP_DEVCTL2_ARI 0x20 /* Alternative Routing-ID */ +#define PCI_EXP_IDO_REQ_EN 0x100 /* ID-based ordering request enable */ +#define PCI_EXP_IDO_CMP_EN 0x200 /* ID-based ordering completion enable */ +#define PCI_EXP_LTR_EN 0x400 /* Latency tolerance reporting */ +#define PCI_EXP_OBFF_MSGA_EN 0x2000 /* OBFF enable with Message type A */ +#define PCI_EXP_OBFF_MSGB_EN 0x4000 /* OBFF enable with Message type B */ +#define PCI_EXP_OBFF_WAKE_EN 0x6000 /* OBFF using WAKE# signaling */ #define PCI_EXP_LNKCTL2 48 /* Link Control 2 */ #define PCI_EXP_SLTCTL2 56 /* Slot Control 2 */ @@ -527,6 +537,7 @@ #define PCI_EXT_CAP_ID_ARI 14 #define PCI_EXT_CAP_ID_ATS 15 #define PCI_EXT_CAP_ID_SRIOV 16 +#define PCI_EXT_CAP_ID_LTR 24 /* Advanced Error Reporting */ #define PCI_ERR_UNCOR_STATUS 4 /* Uncorrectable Error Status */ @@ -683,6 +694,12 @@ #define PCI_SRIOV_VFM_MO 0x2 /* Active.MigrateOut */ #define PCI_SRIOV_VFM_AV 0x3 /* Active.Available */ +#define PCI_LTR_MAX_SNOOP_LAT 0x4 +#define PCI_LTR_MAX_NOSNOOP_LAT 0x6 +#define PCI_LTR_VALUE_MASK 0x000003ff +#define PCI_LTR_SCALE_MASK 0x00001c00 +#define PCI_LTR_SCALE_SHIFT 10 + /* Access Control Service */ #define PCI_ACS_CAP 0x04 /* ACS Capability Register */ #define PCI_ACS_SV 0x01 /* Source Validation */ diff --git a/include/linux/posix-clock.h b/include/linux/posix-clock.h index 7f1183dcd119..34c4498b800f 100644 --- a/include/linux/posix-clock.h +++ b/include/linux/posix-clock.h @@ -45,7 +45,7 @@ struct posix_clock; * @timer_create: Create a new timer * @timer_delete: Remove a previously created timer * @timer_gettime: Get remaining time and interval of a timer - * @timer_setttime: Set a timer's initial expiration and interval + * @timer_settime: Set a timer's initial expiration and interval * @fasync: Optional character device fasync method * @mmap: Optional character device mmap method * @open: Optional character device open method diff --git a/include/linux/pti.h b/include/linux/pti.h new file mode 100644 index 000000000000..81af667bb2d5 --- /dev/null +++ b/include/linux/pti.h @@ -0,0 +1,42 @@ +/* + * Copyright (C) Intel 2011 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + * + * The PTI (Parallel Trace Interface) driver directs trace data routed from + * various parts in the system out through the Intel Penwell PTI port and + * out of the mobile device for analysis with a debugging tool + * (Lauterbach, Fido). This is part of a solution for the MIPI P1149.7, + * compact JTAG, standard. + * + * This header file will allow other parts of the OS to use the + * interface to write out it's contents for debugging a mobile system. + */ + +#ifndef PTI_H_ +#define PTI_H_ + +/* offset for last dword of any PTI message. Part of MIPI P1149.7 */ +#define PTI_LASTDWORD_DTS 0x30 + +/* basic structure used as a write address to the PTI HW */ +struct pti_masterchannel { + u8 master; + u8 channel; +}; + +/* the following functions are defined in misc/pti.c */ +void pti_writedata(struct pti_masterchannel *mc, u8 *buf, int count); +struct pti_masterchannel *pti_request_masterchannel(u8 type); +void pti_release_masterchannel(struct pti_masterchannel *mc); + +#endif /*PTI_H_*/ diff --git a/include/linux/sched.h b/include/linux/sched.h index 885c4f242ad7..aaf71e08222c 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -315,7 +315,6 @@ extern int proc_dowatchdog_thresh(struct ctl_table *table, int write, void __user *buffer, size_t *lenp, loff_t *ppos); extern unsigned int softlockup_panic; -extern int softlockup_thresh; void lockup_detector_init(void); #else static inline void touch_softlockup_watchdog(void) @@ -787,17 +786,39 @@ enum cpu_idle_type { }; /* - * sched-domains (multiprocessor balancing) declarations: + * Increase resolution of nice-level calculations for 64-bit architectures. + * The extra resolution improves shares distribution and load balancing of + * low-weight task groups (eg. nice +19 on an autogroup), deeper taskgroup + * hierarchies, especially on larger systems. This is not a user-visible change + * and does not change the user-interface for setting shares/weights. + * + * We increase resolution only if we have enough bits to allow this increased + * resolution (i.e. BITS_PER_LONG > 32). The costs for increasing resolution + * when BITS_PER_LONG <= 32 are pretty high and the returns do not justify the + * increased costs. */ +#if BITS_PER_LONG > 32 +# define SCHED_LOAD_RESOLUTION 10 +# define scale_load(w) ((w) << SCHED_LOAD_RESOLUTION) +# define scale_load_down(w) ((w) >> SCHED_LOAD_RESOLUTION) +#else +# define SCHED_LOAD_RESOLUTION 0 +# define scale_load(w) (w) +# define scale_load_down(w) (w) +#endif -/* - * Increase resolution of nice-level calculations: - */ -#define SCHED_LOAD_SHIFT 10 +#define SCHED_LOAD_SHIFT (10 + SCHED_LOAD_RESOLUTION) #define SCHED_LOAD_SCALE (1L << SCHED_LOAD_SHIFT) -#define SCHED_LOAD_SCALE_FUZZ SCHED_LOAD_SCALE +/* + * Increase resolution of cpu_power calculations + */ +#define SCHED_POWER_SHIFT 10 +#define SCHED_POWER_SCALE (1L << SCHED_POWER_SHIFT) +/* + * sched-domains (multiprocessor balancing) declarations: + */ #ifdef CONFIG_SMP #define SD_LOAD_BALANCE 0x0001 /* Do load balancing on this domain. */ #define SD_BALANCE_NEWIDLE 0x0002 /* Balance when about to become idle */ diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index 758c5b0c6fd3..a5c31146a337 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -45,7 +45,8 @@ #define PORT_OCTEON 17 /* Cavium OCTEON internal UART */ #define PORT_AR7 18 /* Texas Instruments AR7 internal UART */ #define PORT_U6_16550A 19 /* ST-Ericsson U6xxx internal UART */ -#define PORT_MAX_8250 19 /* max port ID */ +#define PORT_TEGRA 20 /* NVIDIA Tegra internal UART */ +#define PORT_MAX_8250 20 /* max port ID */ /* * ARM specific type numbers. These are not currently guaranteed @@ -202,6 +203,9 @@ /* VIA VT8500 SoC */ #define PORT_VT8500 97 +/* Xilinx PSS UART */ +#define PORT_XUARTPS 98 + #ifdef __KERNEL__ #include <linux/compiler.h> diff --git a/include/linux/serial_reg.h b/include/linux/serial_reg.h index 3ecb71a9e505..c75bda37c18e 100644 --- a/include/linux/serial_reg.h +++ b/include/linux/serial_reg.h @@ -57,6 +57,7 @@ * ST16C654: 8 16 56 60 8 16 32 56 PORT_16654 * TI16C750: 1 16 32 56 xx xx xx xx PORT_16750 * TI16C752: 8 16 56 60 8 16 32 56 + * Tegra: 1 4 8 14 16 8 4 1 PORT_TEGRA */ #define UART_FCR_R_TRIG_00 0x00 #define UART_FCR_R_TRIG_01 0x40 @@ -118,6 +119,7 @@ #define UART_MCR_DTR 0x01 /* DTR complement */ #define UART_LSR 5 /* In: Line Status Register */ +#define UART_LSR_FIFOE 0x80 /* Fifo error */ #define UART_LSR_TEMT 0x40 /* Transmitter empty */ #define UART_LSR_THRE 0x20 /* Transmit-hold-register empty */ #define UART_LSR_BI 0x10 /* Break interrupt indicator */ diff --git a/include/linux/sht15.h b/include/linux/sht15.h index 046bce05ecab..f85c7c523da0 100644 --- a/include/linux/sht15.h +++ b/include/linux/sht15.h @@ -8,17 +8,27 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. + * + * For further information, see the Documentation/hwmon/sht15 file. */ /** * struct sht15_platform_data - sht15 connectivity info - * @gpio_data: no. of gpio to which bidirectional data line is connected - * @gpio_sck: no. of gpio to which the data clock is connected. - * @supply_mv: supply voltage in mv. Overridden by regulator if available. - **/ + * @gpio_data: no. of gpio to which bidirectional data line is + * connected. + * @gpio_sck: no. of gpio to which the data clock is connected. + * @supply_mv: supply voltage in mv. Overridden by regulator if + * available. + * @checksum: flag to indicate the checksum should be validated. + * @no_otp_reload: flag to indicate no reload from OTP. + * @low_resolution: flag to indicate the temp/humidity resolution to use. + */ struct sht15_platform_data { int gpio_data; int gpio_sck; int supply_mv; + bool checksum; + bool no_otp_reload; + bool low_resolution; }; diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 827681540d6f..e8b78ce14474 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -28,7 +28,6 @@ #include <net/checksum.h> #include <linux/rcupdate.h> #include <linux/dmaengine.h> -#include <linux/prefetch.h> #include <linux/hrtimer.h> /* Don't change this without changing skb_csum_unnecessary! */ @@ -1443,7 +1442,7 @@ extern int ___pskb_trim(struct sk_buff *skb, unsigned int len); static inline void __skb_trim(struct sk_buff *skb, unsigned int len) { - if (unlikely(skb->data_len)) { + if (unlikely(skb_is_nonlinear(skb))) { WARN_ON(1); return; } @@ -1783,7 +1782,7 @@ static inline int pskb_trim_rcsum(struct sk_buff *skb, unsigned int len) #define skb_queue_walk(queue, skb) \ for (skb = (queue)->next; \ - prefetch(skb->next), (skb != (struct sk_buff *)(queue)); \ + skb != (struct sk_buff *)(queue); \ skb = skb->next) #define skb_queue_walk_safe(queue, skb, tmp) \ @@ -1792,7 +1791,7 @@ static inline int pskb_trim_rcsum(struct sk_buff *skb, unsigned int len) skb = tmp, tmp = skb->next) #define skb_queue_walk_from(queue, skb) \ - for (; prefetch(skb->next), (skb != (struct sk_buff *)(queue)); \ + for (; skb != (struct sk_buff *)(queue); \ skb = skb->next) #define skb_queue_walk_from_safe(queue, skb, tmp) \ @@ -1802,7 +1801,7 @@ static inline int pskb_trim_rcsum(struct sk_buff *skb, unsigned int len) #define skb_queue_reverse_walk(queue, skb) \ for (skb = (queue)->prev; \ - prefetch(skb->prev), (skb != (struct sk_buff *)(queue)); \ + skb != (struct sk_buff *)(queue); \ skb = skb->prev) #define skb_queue_reverse_walk_safe(queue, skb, tmp) \ diff --git a/include/linux/slub_def.h b/include/linux/slub_def.h index 45ca123e8002..c8668d161dd8 100644 --- a/include/linux/slub_def.h +++ b/include/linux/slub_def.h @@ -37,9 +37,7 @@ enum stat_item { struct kmem_cache_cpu { void **freelist; /* Pointer to next available object */ -#ifdef CONFIG_CMPXCHG_LOCAL unsigned long tid; /* Globally unique transaction id */ -#endif struct page *page; /* The slab from which we are allocating */ int node; /* The node of the page (or -1 for debug) */ #ifdef CONFIG_SLUB_STATS @@ -179,7 +177,8 @@ static __always_inline int kmalloc_index(size_t size) if (size <= 4 * 1024) return 12; /* * The following is only needed to support architectures with a larger page - * size than 4k. + * size than 4k. We need to support 2 * PAGE_SIZE here. So for a 64k page + * size we would have to go up to 128k. */ if (size <= 8 * 1024) return 13; if (size <= 16 * 1024) return 14; @@ -190,7 +189,8 @@ static __always_inline int kmalloc_index(size_t size) if (size <= 512 * 1024) return 19; if (size <= 1024 * 1024) return 20; if (size <= 2 * 1024 * 1024) return 21; - return -1; + BUG(); + return -1; /* Will never be reached */ /* * What we really wanted to do and cannot do because of compiler issues is: diff --git a/include/linux/thread_info.h b/include/linux/thread_info.h index 20fc303947d3..8d03f079688c 100644 --- a/include/linux/thread_info.h +++ b/include/linux/thread_info.h @@ -29,7 +29,7 @@ struct restart_block { } futex; /* For nanosleep */ struct { - clockid_t index; + clockid_t clockid; struct timespec __user *rmtp; #ifdef CONFIG_COMPAT struct compat_timespec __user *compat_rmtp; diff --git a/include/linux/timerfd.h b/include/linux/timerfd.h index 2d0792983f8c..d3b57fa12225 100644 --- a/include/linux/timerfd.h +++ b/include/linux/timerfd.h @@ -19,6 +19,7 @@ * shared O_* flags. */ #define TFD_TIMER_ABSTIME (1 << 0) +#define TFD_TIMER_CANCEL_ON_SET (1 << 1) #define TFD_CLOEXEC O_CLOEXEC #define TFD_NONBLOCK O_NONBLOCK @@ -26,6 +27,6 @@ /* Flags for timerfd_create. */ #define TFD_CREATE_FLAGS TFD_SHARED_FCNTL_FLAGS /* Flags for timerfd_settime. */ -#define TFD_SETTIME_FLAGS TFD_TIMER_ABSTIME +#define TFD_SETTIME_FLAGS (TFD_TIMER_ABSTIME | TFD_TIMER_CANCEL_ON_SET) #endif /* _LINUX_TIMERFD_H */ diff --git a/include/linux/tty.h b/include/linux/tty.h index 9f469c700550..d6f05292e456 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -50,6 +50,8 @@ #define N_CAIF 20 /* CAIF protocol for talking to modems */ #define N_GSM0710 21 /* GSM 0710 Mux */ #define N_TI_WL 22 /* for TI's WL BT, FM, GPS combo chips */ +#define N_TRACESINK 23 /* Trace data routing for MIPI P1149.7 */ +#define N_TRACEROUTER 24 /* Trace data routing for MIPI P1149.7 */ /* * This character is the same as _POSIX_VDISABLE: it cannot be used as @@ -472,6 +474,7 @@ extern int tty_add_file(struct tty_struct *tty, struct file *file); extern void free_tty_struct(struct tty_struct *tty); extern void initialize_tty_struct(struct tty_struct *tty, struct tty_driver *driver, int idx); +extern void deinitialize_tty_struct(struct tty_struct *tty); extern struct tty_struct *tty_init_dev(struct tty_driver *driver, int idx, int first_ok); extern int tty_release(struct inode *inode, struct file *filp); @@ -525,6 +528,7 @@ extern int tty_set_ldisc(struct tty_struct *tty, int ldisc); extern int tty_ldisc_setup(struct tty_struct *tty, struct tty_struct *o_tty); extern void tty_ldisc_release(struct tty_struct *tty, struct tty_struct *o_tty); extern void tty_ldisc_init(struct tty_struct *tty); +extern void tty_ldisc_deinit(struct tty_struct *tty); extern void tty_ldisc_begin(void); /* This last one is just for the tty layer internals and shouldn't be used elsewhere */ extern void tty_ldisc_enable(struct tty_struct *tty); diff --git a/include/linux/tty_ldisc.h b/include/linux/tty_ldisc.h index ff7dc08696a8..5b07792ccb46 100644 --- a/include/linux/tty_ldisc.h +++ b/include/linux/tty_ldisc.h @@ -76,7 +76,7 @@ * tty device. It is solely the responsibility of the line * discipline to handle poll requests. * - * void (*receive_buf)(struct tty_struct *, const unsigned char *cp, + * unsigned int (*receive_buf)(struct tty_struct *, const unsigned char *cp, * char *fp, int count); * * This function is called by the low-level tty driver to send @@ -84,7 +84,8 @@ * processing. <cp> is a pointer to the buffer of input * character received by the device. <fp> is a pointer to a * pointer of flag bytes which indicate whether a character was - * received with a parity error, etc. + * received with a parity error, etc. Returns the amount of bytes + * received. * * void (*write_wakeup)(struct tty_struct *); * @@ -140,8 +141,8 @@ struct tty_ldisc_ops { /* * The following routines are called from below. */ - void (*receive_buf)(struct tty_struct *, const unsigned char *cp, - char *fp, int count); + unsigned int (*receive_buf)(struct tty_struct *, + const unsigned char *cp, char *fp, int count); void (*write_wakeup)(struct tty_struct *); void (*dcd_change)(struct tty_struct *, unsigned int, struct pps_event_time *); diff --git a/include/linux/usb.h b/include/linux/usb.h index 65f78ca5d88e..73c7df489607 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -806,8 +806,10 @@ struct usbdrv_wrap { * @resume: Called when the device is being resumed by the system. * @reset_resume: Called when the suspended device has been reset instead * of being resumed. - * @pre_reset: Called by usb_reset_device() when the device - * is about to be reset. + * @pre_reset: Called by usb_reset_device() when the device is about to be + * reset. This routine must not return until the driver has no active + * URBs for the device, and no more URBs may be submitted until the + * post_reset method is called. * @post_reset: Called by usb_reset_device() after the device * has been reset * @id_table: USB drivers use ID table to support hotplugging. diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h index b72f305ce6bd..0fd3fbdd8283 100644 --- a/include/linux/usb/ch9.h +++ b/include/linux/usb/ch9.h @@ -579,7 +579,7 @@ struct usb_ss_ep_comp_descriptor { __u8 bMaxBurst; __u8 bmAttributes; - __u16 wBytesPerInterval; + __le16 wBytesPerInterval; } __attribute__ ((packed)); #define USB_DT_SS_EP_COMP_SIZE 6 diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h index 882a084a8411..b78cba466d3d 100644 --- a/include/linux/usb/composite.h +++ b/include/linux/usb/composite.h @@ -37,6 +37,14 @@ #include <linux/usb/ch9.h> #include <linux/usb/gadget.h> +/* + * USB function drivers should return USB_GADGET_DELAYED_STATUS if they + * wish to delay the data/status stages of the control transfer till they + * are ready. The control transfer will then be kept from completing till + * all the function drivers that requested for USB_GADGET_DELAYED_STAUS + * invoke usb_composite_setup_continue(). + */ +#define USB_GADGET_DELAYED_STATUS 0x7fff /* Impossibly large value */ struct usb_configuration; @@ -285,6 +293,7 @@ struct usb_composite_driver { extern int usb_composite_probe(struct usb_composite_driver *driver, int (*bind)(struct usb_composite_dev *cdev)); extern void usb_composite_unregister(struct usb_composite_driver *driver); +extern void usb_composite_setup_continue(struct usb_composite_dev *cdev); /** @@ -342,7 +351,12 @@ struct usb_composite_dev { */ unsigned deactivations; - /* protects at least deactivation count */ + /* the composite driver won't complete the control transfer's + * data/status stages till delayed_status is zero. + */ + int delayed_status; + + /* protects deactivations and delayed_status counts*/ spinlock_t lock; }; diff --git a/include/linux/usb/ehci_def.h b/include/linux/usb/ehci_def.h index e49dfd45baa4..7cc95ee3606b 100644 --- a/include/linux/usb/ehci_def.h +++ b/include/linux/usb/ehci_def.h @@ -25,10 +25,15 @@ struct ehci_caps { /* these fields are specified as 8 and 16 bit registers, * but some hosts can't perform 8 or 16 bit PCI accesses. + * some hosts treat caplength and hciversion as parts of a 32-bit + * register, others treat them as two separate registers, this + * affects the memory map for big endian controllers. */ u32 hc_capbase; -#define HC_LENGTH(p) (((p)>>00)&0x00ff) /* bits 7:0 */ -#define HC_VERSION(p) (((p)>>16)&0xffff) /* bits 31:16 */ +#define HC_LENGTH(ehci, p) (0x00ff&((p) >> /* bits 7:0 / offset 00h */ \ + (ehci_big_endian_capbase(ehci) ? 24 : 0))) +#define HC_VERSION(ehci, p) (0xffff&((p) >> /* bits 31:16 / offset 02h */ \ + (ehci_big_endian_capbase(ehci) ? 0 : 16))) u32 hcs_params; /* HCSPARAMS - offset 0x4 */ #define HCS_DEBUG_PORT(p) (((p)>>20)&0xf) /* bits 23:20, debug port? */ #define HCS_INDICATOR(p) ((p)&(1 << 16)) /* true: has port indicators */ @@ -52,7 +57,7 @@ struct ehci_caps { #define HCC_PGM_FRAMELISTLEN(p) ((p)&(1 << 1)) /* true: periodic_size changes*/ #define HCC_64BIT_ADDR(p) ((p)&(1)) /* true: can use 64-bit addr */ u8 portroute[8]; /* nibbles for routing - offset 0xC */ -} __attribute__ ((packed)); +}; /* Section 2.3 Host Controller Operational Registers */ @@ -150,7 +155,7 @@ struct ehci_regs { #define PORT_CSC (1<<1) /* connect status change */ #define PORT_CONNECT (1<<0) /* device connected */ #define PORT_RWC_BITS (PORT_CSC | PORT_PEC | PORT_OCC) -} __attribute__ ((packed)); +}; #define USBMODE 0x68 /* USB Device mode */ #define USBMODE_SDIS (1<<3) /* Stream disable */ @@ -194,7 +199,7 @@ struct ehci_dbg_port { u32 data47; u32 address; #define DBGP_EPADDR(dev, ep) (((dev)<<8)|(ep)) -} __attribute__ ((packed)); +}; #ifdef CONFIG_EARLY_PRINTK_DBGP #include <linux/init.h> diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h index e538172c0f64..dd1571db55e7 100644 --- a/include/linux/usb/gadget.h +++ b/include/linux/usb/gadget.h @@ -890,8 +890,8 @@ static inline void usb_free_descriptors(struct usb_descriptor_header **v) /* utility wrapping a simple endpoint selection policy */ extern struct usb_ep *usb_ep_autoconfig(struct usb_gadget *, - struct usb_endpoint_descriptor *) __devinit; + struct usb_endpoint_descriptor *); -extern void usb_ep_autoconfig_reset(struct usb_gadget *) __devinit; +extern void usb_ep_autoconfig_reset(struct usb_gadget *); #endif /* __LINUX_USB_GADGET_H */ diff --git a/include/linux/usb/msm_hsusb.h b/include/linux/usb/msm_hsusb.h index 3657403eac18..00311fe9d0df 100644 --- a/include/linux/usb/msm_hsusb.h +++ b/include/linux/usb/msm_hsusb.h @@ -2,7 +2,7 @@ * * Copyright (C) 2008 Google, Inc. * Author: Brian Swetland <swetland@google.com> - * Copyright (c) 2009-2010, Code Aurora Forum. All rights reserved. + * Copyright (c) 2009-2011, Code Aurora Forum. All rights reserved. * * This software is licensed under the terms of the GNU General Public * License version 2, as published by the Free Software Foundation, and @@ -54,6 +54,64 @@ enum otg_control_type { }; /** + * PHY used in + * + * INVALID_PHY Unsupported PHY + * CI_45NM_INTEGRATED_PHY Chipidea 45nm integrated PHY + * SNPS_28NM_INTEGRATED_PHY Synopsis 28nm integrated PHY + * + */ +enum msm_usb_phy_type { + INVALID_PHY = 0, + CI_45NM_INTEGRATED_PHY, + SNPS_28NM_INTEGRATED_PHY, +}; + +#define IDEV_CHG_MAX 1500 +#define IUNIT 100 + +/** + * Different states involved in USB charger detection. + * + * USB_CHG_STATE_UNDEFINED USB charger is not connected or detection + * process is not yet started. + * USB_CHG_STATE_WAIT_FOR_DCD Waiting for Data pins contact. + * USB_CHG_STATE_DCD_DONE Data pin contact is detected. + * USB_CHG_STATE_PRIMARY_DONE Primary detection is completed (Detects + * between SDP and DCP/CDP). + * USB_CHG_STATE_SECONDARY_DONE Secondary detection is completed (Detects + * between DCP and CDP). + * USB_CHG_STATE_DETECTED USB charger type is determined. + * + */ +enum usb_chg_state { + USB_CHG_STATE_UNDEFINED = 0, + USB_CHG_STATE_WAIT_FOR_DCD, + USB_CHG_STATE_DCD_DONE, + USB_CHG_STATE_PRIMARY_DONE, + USB_CHG_STATE_SECONDARY_DONE, + USB_CHG_STATE_DETECTED, +}; + +/** + * USB charger types + * + * USB_INVALID_CHARGER Invalid USB charger. + * USB_SDP_CHARGER Standard downstream port. Refers to a downstream port + * on USB2.0 compliant host/hub. + * USB_DCP_CHARGER Dedicated charger port (AC charger/ Wall charger). + * USB_CDP_CHARGER Charging downstream port. Enumeration can happen and + * IDEV_CHG_MAX can be drawn irrespective of USB state. + * + */ +enum usb_chg_type { + USB_INVALID_CHARGER = 0, + USB_SDP_CHARGER, + USB_DCP_CHARGER, + USB_CDP_CHARGER, +}; + +/** * struct msm_otg_platform_data - platform device data * for msm_otg driver. * @phy_init_seq: PHY configuration sequence. val, reg pairs @@ -64,7 +122,8 @@ enum otg_control_type { * @otg_control: OTG switch controlled by user/Id pin * @default_mode: Default operational mode. Applicable only if * OTG switch is controller by user. - * + * @pclk_src_name: pclk is derived from ebi1_usb_clk in case of 7x27 and 8k + * dfab_usb_hs_clk in case of 8660 and 8960. */ struct msm_otg_platform_data { int *phy_init_seq; @@ -73,7 +132,9 @@ struct msm_otg_platform_data { enum usb_mode_type mode; enum otg_control_type otg_control; enum usb_mode_type default_mode; + enum msm_usb_phy_type phy_type; void (*setup_gpio)(enum usb_otg_state state); + char *pclk_src_name; }; /** @@ -83,6 +144,7 @@ struct msm_otg_platform_data { * @irq: IRQ number assigned for HSUSB controller. * @clk: clock struct of usb_hs_clk. * @pclk: clock struct of usb_hs_pclk. + * @pclk_src: pclk source for voting. * @phy_reset_clk: clock struct of usb_phy_clk. * @core_clk: clock struct of usb_hs_core_clk. * @regs: ioremapped register base address. @@ -90,7 +152,12 @@ struct msm_otg_platform_data { * @sm_work: OTG state machine work. * @in_lpm: indicates low power mode (LPM) state. * @async_int: Async interrupt arrived. - * + * @cur_power: The amount of mA available from downstream port. + * @chg_work: Charger detection work. + * @chg_state: The state of charger detection process. + * @chg_type: The type of charger attached. + * @dcd_retires: The retry count used to track Data contact + * detection process. */ struct msm_otg { struct otg_transceiver otg; @@ -98,6 +165,7 @@ struct msm_otg { int irq; struct clk *clk; struct clk *pclk; + struct clk *pclk_src; struct clk *phy_reset_clk; struct clk *core_clk; void __iomem *regs; @@ -107,6 +175,11 @@ struct msm_otg { struct work_struct sm_work; atomic_t in_lpm; int async_int; + unsigned cur_power; + struct delayed_work chg_work; + enum usb_chg_state chg_state; + enum usb_chg_type chg_type; + u8 dcd_retries; }; #endif diff --git a/include/linux/usb/msm_hsusb_hw.h b/include/linux/usb/msm_hsusb_hw.h index 7d1babbff071..6e97a2d3d39f 100644 --- a/include/linux/usb/msm_hsusb_hw.h +++ b/include/linux/usb/msm_hsusb_hw.h @@ -24,6 +24,7 @@ #define USB_PORTSC (MSM_USB_BASE + 0x0184) #define USB_OTGSC (MSM_USB_BASE + 0x01A4) #define USB_USBMODE (MSM_USB_BASE + 0x01A8) +#define USB_PHY_CTRL (MSM_USB_BASE + 0x0240) #define USBCMD_RESET 2 #define USB_USBINTR (MSM_USB_BASE + 0x0148) @@ -42,6 +43,7 @@ #define ASYNC_INTR_CTRL (1 << 29) /* Enable async interrupt */ #define ULPI_STP_CTRL (1 << 30) /* Block communication with PHY */ +#define PHY_RETEN (1 << 1) /* PHY retention enable/disable */ /* OTG definitions */ #define OTGSC_INTSTS_MASK (0x7f << 16) diff --git a/include/linux/usb/otg.h b/include/linux/usb/otg.h index 6e40718f5abe..d87f44f5b04e 100644 --- a/include/linux/usb/otg.h +++ b/include/linux/usb/otg.h @@ -168,6 +168,7 @@ otg_shutdown(struct otg_transceiver *otg) #ifdef CONFIG_USB_OTG_UTILS extern struct otg_transceiver *otg_get_transceiver(void); extern void otg_put_transceiver(struct otg_transceiver *); +extern const char *otg_state_string(enum usb_otg_state state); #else static inline struct otg_transceiver *otg_get_transceiver(void) { @@ -177,6 +178,11 @@ static inline struct otg_transceiver *otg_get_transceiver(void) static inline void otg_put_transceiver(struct otg_transceiver *x) { } + +static inline const char *otg_state_string(enum usb_otg_state state) +{ + return NULL; +} #endif /* Context: can sleep */ diff --git a/include/linux/usb/renesas_usbhs.h b/include/linux/usb/renesas_usbhs.h new file mode 100644 index 000000000000..3a7f1d982dd6 --- /dev/null +++ b/include/linux/usb/renesas_usbhs.h @@ -0,0 +1,156 @@ +/* + * Renesas USB + * + * Copyright (C) 2011 Renesas Solutions Corp. + * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + */ +#ifndef RENESAS_USB_H +#define RENESAS_USB_H +#include <linux/platform_device.h> +#include <linux/usb/ch9.h> + +/* + * module type + * + * it will be return value from get_id + */ +enum { + USBHS_HOST = 0, + USBHS_GADGET, + USBHS_MAX, +}; + +/* + * callback functions table for driver + * + * These functions are called from platform for driver. + * Callback function's pointer will be set before + * renesas_usbhs_platform_callback :: hardware_init was called + */ +struct renesas_usbhs_driver_callback { + int (*notify_hotplug)(struct platform_device *pdev); +}; + +/* + * callback functions for platform + * + * These functions are called from driver for platform + */ +struct renesas_usbhs_platform_callback { + + /* + * option: + * + * Hardware init function for platform. + * it is called when driver was probed. + */ + int (*hardware_init)(struct platform_device *pdev); + + /* + * option: + * + * Hardware exit function for platform. + * it is called when driver was removed + */ + void (*hardware_exit)(struct platform_device *pdev); + + /* + * option: + * + * Phy reset for platform + */ + void (*phy_reset)(struct platform_device *pdev); + + /* + * get USB ID function + * - USBHS_HOST + * - USBHS_GADGET + */ + int (*get_id)(struct platform_device *pdev); + + /* + * get VBUS status function. + */ + int (*get_vbus)(struct platform_device *pdev); +}; + +/* + * parameters for renesas usbhs + * + * some register needs USB chip specific parameters. + * This struct show it to driver + */ +struct renesas_usbhs_driver_param { + /* + * pipe settings + */ + u32 *pipe_type; /* array of USB_ENDPOINT_XFER_xxx (from ep0) */ + int pipe_size; /* pipe_type array size */ + + /* + * option: + * + * for BUSWAIT :: BWAIT + * */ + int buswait_bwait; + + /* + * option: + * + * delay time from notify_hotplug callback + */ + int detection_delay; +}; + +/* + * option: + * + * platform information for renesas_usbhs driver. + */ +struct renesas_usbhs_platform_info { + /* + * option: + * + * platform set these functions before + * call platform_add_devices if needed + */ + struct renesas_usbhs_platform_callback platform_callback; + + /* + * driver set these callback functions pointer. + * platform can use it on callback functions + */ + struct renesas_usbhs_driver_callback driver_callback; + + /* + * option: + * + * driver use these param for some register + */ + struct renesas_usbhs_driver_param driver_param; +}; + +/* + * macro for platform + */ +#define renesas_usbhs_get_info(pdev)\ + ((struct renesas_usbhs_platform_info *)(pdev)->dev.platform_data) + +#define renesas_usbhs_call_notify_hotplug(pdev) \ + ({ \ + struct renesas_usbhs_driver_callback *dc; \ + dc = &(renesas_usbhs_get_info(pdev)->driver_callback); \ + if (dc && dc->notify_hotplug) \ + dc->notify_hotplug(pdev); \ + }) +#endif /* RENESAS_USB_H */ diff --git a/include/linux/uvcvideo.h b/include/linux/uvcvideo.h new file mode 100644 index 000000000000..f46a53f060d7 --- /dev/null +++ b/include/linux/uvcvideo.h @@ -0,0 +1,69 @@ +#ifndef __LINUX_UVCVIDEO_H_ +#define __LINUX_UVCVIDEO_H_ + +#include <linux/ioctl.h> +#include <linux/types.h> + +/* + * Dynamic controls + */ + +/* Data types for UVC control data */ +#define UVC_CTRL_DATA_TYPE_RAW 0 +#define UVC_CTRL_DATA_TYPE_SIGNED 1 +#define UVC_CTRL_DATA_TYPE_UNSIGNED 2 +#define UVC_CTRL_DATA_TYPE_BOOLEAN 3 +#define UVC_CTRL_DATA_TYPE_ENUM 4 +#define UVC_CTRL_DATA_TYPE_BITMASK 5 + +/* Control flags */ +#define UVC_CTRL_FLAG_SET_CUR (1 << 0) +#define UVC_CTRL_FLAG_GET_CUR (1 << 1) +#define UVC_CTRL_FLAG_GET_MIN (1 << 2) +#define UVC_CTRL_FLAG_GET_MAX (1 << 3) +#define UVC_CTRL_FLAG_GET_RES (1 << 4) +#define UVC_CTRL_FLAG_GET_DEF (1 << 5) +/* Control should be saved at suspend and restored at resume. */ +#define UVC_CTRL_FLAG_RESTORE (1 << 6) +/* Control can be updated by the camera. */ +#define UVC_CTRL_FLAG_AUTO_UPDATE (1 << 7) + +#define UVC_CTRL_FLAG_GET_RANGE \ + (UVC_CTRL_FLAG_GET_CUR | UVC_CTRL_FLAG_GET_MIN | \ + UVC_CTRL_FLAG_GET_MAX | UVC_CTRL_FLAG_GET_RES | \ + UVC_CTRL_FLAG_GET_DEF) + +struct uvc_menu_info { + __u32 value; + __u8 name[32]; +}; + +struct uvc_xu_control_mapping { + __u32 id; + __u8 name[32]; + __u8 entity[16]; + __u8 selector; + + __u8 size; + __u8 offset; + __u32 v4l2_type; + __u32 data_type; + + struct uvc_menu_info __user *menu_info; + __u32 menu_count; + + __u32 reserved[4]; +}; + +struct uvc_xu_control_query { + __u8 unit; + __u8 selector; + __u8 query; + __u16 size; + __u8 __user *data; +}; + +#define UVCIOC_CTRL_MAP _IOWR('u', 0x20, struct uvc_xu_control_mapping) +#define UVCIOC_CTRL_QUERY _IOWR('u', 0x21, struct uvc_xu_control_query) + +#endif diff --git a/include/linux/v4l2-mediabus.h b/include/linux/v4l2-mediabus.h index de5c15921025..5ea7f753a348 100644 --- a/include/linux/v4l2-mediabus.h +++ b/include/linux/v4l2-mediabus.h @@ -89,6 +89,9 @@ enum v4l2_mbus_pixelcode { V4L2_MBUS_FMT_SGBRG12_1X12 = 0x3010, V4L2_MBUS_FMT_SGRBG12_1X12 = 0x3011, V4L2_MBUS_FMT_SRGGB12_1X12 = 0x3012, + + /* JPEG compressed formats - next is 0x4002 */ + V4L2_MBUS_FMT_JPEG_1X8 = 0x4001, }; /** diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h index be82c8ead1af..8a4c309d2344 100644 --- a/include/linux/videodev2.h +++ b/include/linux/videodev2.h @@ -311,6 +311,9 @@ struct v4l2_pix_format { #define V4L2_PIX_FMT_Y12 v4l2_fourcc('Y', '1', '2', ' ') /* 12 Greyscale */ #define V4L2_PIX_FMT_Y16 v4l2_fourcc('Y', '1', '6', ' ') /* 16 Greyscale */ +/* Grey bit-packed formats */ +#define V4L2_PIX_FMT_Y10BPACK v4l2_fourcc('Y', '1', '0', 'B') /* 10 Greyscale bit-packed */ + /* Palette formats */ #define V4L2_PIX_FMT_PAL8 v4l2_fourcc('P', 'A', 'L', '8') /* 8 8-bit palette */ @@ -333,6 +336,7 @@ struct v4l2_pix_format { #define V4L2_PIX_FMT_YUV420 v4l2_fourcc('Y', 'U', '1', '2') /* 12 YUV 4:2:0 */ #define V4L2_PIX_FMT_HI240 v4l2_fourcc('H', 'I', '2', '4') /* 8 8-bit color */ #define V4L2_PIX_FMT_HM12 v4l2_fourcc('H', 'M', '1', '2') /* 8 YUV 4:2:0 16x16 macroblocks */ +#define V4L2_PIX_FMT_M420 v4l2_fourcc('M', '4', '2', '0') /* 12 YUV 4:2:0 2 lines y, 1 line uv interleaved */ /* two planes -- one Y, one Cr + Cb interleaved */ #define V4L2_PIX_FMT_NV12 v4l2_fourcc('N', 'V', '1', '2') /* 12 Y/CbCr 4:2:0 */ |