summaryrefslogtreecommitdiff
path: root/include/soc/tegra/bpmp-abi.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/soc/tegra/bpmp-abi.h')
-rw-r--r--include/soc/tegra/bpmp-abi.h418
1 files changed, 408 insertions, 10 deletions
diff --git a/include/soc/tegra/bpmp-abi.h b/include/soc/tegra/bpmp-abi.h
index 0aaef5960e29..98d8d38b99a1 100644
--- a/include/soc/tegra/bpmp-abi.h
+++ b/include/soc/tegra/bpmp-abi.h
@@ -81,13 +81,18 @@
* Provides the MRQ number for the MRQ message: #mrq. The remainder of
* the MRQ message is a payload (immediately following the
* mrq_request) whose format depends on mrq.
- *
- * @todo document the flags
*/
struct mrq_request {
/** @brief MRQ number of the request */
uint32_t mrq;
- /** @brief flags for the request */
+ /**
+ * @brief flags providing follow up directions to the receiver
+ *
+ * | Bit | Description |
+ * |-----|--------------------------------------------|
+ * | 1 | ring the sender's doorbell when responding |
+ * | 0 | should be 1 |
+ */
uint32_t flags;
} __ABI_PACKED;
@@ -99,13 +104,11 @@ struct mrq_request {
* remainder of the MRQ response is a payload (immediately following
* the mrq_response) whose format depends on the associated
* mrq_request::mrq
- *
- * @todo document the flags
*/
struct mrq_response {
/** @brief error code for the MRQ request itself */
int32_t err;
- /** @brief flags for the response */
+ /** @brief reserved for future use */
uint32_t flags;
} __ABI_PACKED;
@@ -147,6 +150,8 @@ struct mrq_response {
#define MRQ_ABI_RATCHET 29
#define MRQ_EMC_DVFS_LATENCY 31
#define MRQ_TRACE_ITER 64
+#define MRQ_RINGBUF_CONSOLE 65
+#define MRQ_PG 66
/** @} */
@@ -155,7 +160,7 @@ struct mrq_response {
* @brief Maximum MRQ code to be sent by CPU software to
* BPMP. Subject to change in future
*/
-#define MAX_CPU_MRQ_ID 64
+#define MAX_CPU_MRQ_ID 66
/**
* @addtogroup MRQ_Payloads Message Payloads
@@ -175,6 +180,7 @@ struct mrq_response {
* @defgroup Vhint CPU Voltage hint
* @defgroup MRQ_Deprecated Deprecated MRQ messages
* @defgroup EMC
+ * @defgroup RingbufConsole
* @}
*/
@@ -637,7 +643,7 @@ struct mrq_debugfs_response {
* * Initiators: Any
* * Targets: BPMP
* * Request Payload: @ref mrq_reset_request
- * * Response Payload: N/A
+ * * Response Payload: @ref mrq_reset_response
*/
/**
@@ -647,6 +653,7 @@ enum mrq_reset_commands {
CMD_RESET_ASSERT = 1,
CMD_RESET_DEASSERT = 2,
CMD_RESET_MODULE = 3,
+ CMD_RESET_GET_MAX_ID = 4,
CMD_RESET_MAX, /* not part of ABI and subject to change */
};
@@ -665,6 +672,38 @@ struct mrq_reset_request {
} __ABI_PACKED;
/**
+ * @ingroup Reset
+ * @brief Response for MRQ_RESET sub-command CMD_RESET_GET_MAX_ID. When
+ * this sub-command is not supported, firmware will return -BPMP_EBADCMD
+ * in mrq_response::err.
+ */
+struct cmd_reset_get_max_id_response {
+ /** @brief max reset id */
+ uint32_t max_id;
+} __ABI_PACKED;
+
+/**
+ * @ingroup Reset
+ * @brief Response with MRQ_RESET
+ *
+ * Each sub-command supported by @ref mrq_reset_request may return
+ * sub-command-specific data. Some do and some do not as indicated
+ * in the following table
+ *
+ * | sub-command | payload |
+ * |----------------------|------------------|
+ * | CMD_RESET_ASSERT | - |
+ * | CMD_RESET_DEASSERT | - |
+ * | CMD_RESET_MODULE | - |
+ * | CMD_RESET_GET_MAX_ID | reset_get_max_id |
+ */
+struct mrq_reset_response {
+ union {
+ struct cmd_reset_get_max_id_response reset_get_max_id;
+ } __UNION_ANON;
+} __ABI_PACKED;
+
+/**
* @ingroup MRQ_Codes
* @def MRQ_I2C
* @brief issue an i2c transaction
@@ -812,6 +851,17 @@ enum {
};
/** @} */
+/**
+ * @name MRQ_CLK properties
+ * Flag bits for cmd_clk_properties_response::flags and
+ * cmd_clk_get_all_info_response::flags
+ * @{
+ */
+#define BPMP_CLK_HAS_MUX (1 << 0)
+#define BPMP_CLK_HAS_SET_RATE (1 << 1)
+#define BPMP_CLK_IS_ROOT (1 << 2)
+/** @} */
+
#define MRQ_CLK_NAME_MAXLEN 40
#define MRQ_CLK_MAX_PARENTS 16
@@ -1010,7 +1060,7 @@ struct mrq_clk_response {
*
* * Platforms: All
* * Initiators: Any
- * * Targets: Any
+ * * Targets: Any except DMCE
* * Request Payload: @ref mrq_query_abi_request
* * Response Payload: @ref mrq_query_abi_response
*/
@@ -1030,6 +1080,9 @@ struct mrq_query_abi_request {
/**
* @ingroup ABI_info
* @brief response to MRQ_QUERY_ABI
+ *
+ * @note mrq_response::err of 0 indicates that the query was
+ * successful, not that the MRQ itself is supported!
*/
struct mrq_query_abi_response {
/** @brief 0 if queried MRQ is supported. Else, -#BPMP_ENODEV */
@@ -1080,7 +1133,9 @@ struct mrq_pg_read_state_response {
/**
* @ingroup MRQ_Codes
* @def MRQ_PG_UPDATE_STATE
- * @brief modify the power-gating state of a partition
+ * @brief modify the power-gating state of a partition. In contrast to
+ * MRQ_PG calls, the operations that change state (on/off) of power
+ * partition are reference counted.
*
* * Platforms: T186
* * Initiators: Any
@@ -1126,6 +1181,171 @@ struct mrq_pg_update_state_request {
/**
* @ingroup MRQ_Codes
+ * @def MRQ_PG
+ * @brief Control power-gating state of a partition. In contrast to
+ * MRQ_PG_UPDATE_STATE, operations that change the power partition
+ * state are NOT reference counted
+ *
+ * * Platforms: T186
+ * * Initiators: Any
+ * * Targets: BPMP
+ * * Request Payload: @ref mrq_pg_request
+ * * Response Payload: @ref mrq_pg_response
+ * @addtogroup Powergating
+ * @{
+ */
+
+/**
+ * @name MRQ_PG sub-commands
+ * @{
+ */
+enum mrq_pg_cmd {
+ /**
+ * @brief Check whether the BPMP driver supports the specified
+ * request type
+ *
+ * mrq_response::err is 0 if the specified request is
+ * supported and -#BPMP_ENODEV otherwise.
+ */
+ CMD_PG_QUERY_ABI = 0,
+
+ /**
+ * @brief Set the current state of specified power domain. The
+ * possible values for power domains are defined in enum
+ * pg_states
+ *
+ * mrq_response:err is
+ * 0: Success
+ * -#BPMP_EINVAL: Invalid request parameters
+ */
+ CMD_PG_SET_STATE = 1,
+
+ /**
+ * @brief Get the current state of specified power domain. The
+ * possible values for power domains are defined in enum
+ * pg_states
+ *
+ * mrq_response:err is
+ * 0: Success
+ * -#BPMP_EINVAL: Invalid request parameters
+ */
+ CMD_PG_GET_STATE = 2,
+
+ /**
+ * @brief get the name string of specified power domain id.
+ *
+ * mrq_response:err is
+ * 0: Success
+ * -#BPMP_EINVAL: Invalid request parameters
+ */
+ CMD_PG_GET_NAME = 3,
+
+
+ /**
+ * @brief get the highest power domain id in the system. Not
+ * all IDs between 0 and max_id are valid IDs.
+ *
+ * mrq_response:err is
+ * 0: Success
+ * -#BPMP_EINVAL: Invalid request parameters
+ */
+ CMD_PG_GET_MAX_ID = 4,
+};
+/** @} */
+
+#define MRQ_PG_NAME_MAXLEN 40
+
+/**
+ * @brief possible power domain states in
+ * cmd_pg_set_state_request:state and cmd_pg_get_state_response:state.
+ * PG_STATE_OFF: power domain is OFF
+ * PG_STATE_ON: power domain is ON
+ * PG_STATE_RUNNING: power domain is ON and made into directly usable
+ * state by turning on the clocks associated with
+ * the domain
+ */
+enum pg_states {
+ PG_STATE_OFF = 0,
+ PG_STATE_ON = 1,
+ PG_STATE_RUNNING = 2,
+};
+
+struct cmd_pg_query_abi_request {
+ uint32_t type; /* enum mrq_pg_cmd */
+} __ABI_PACKED;
+
+struct cmd_pg_set_state_request {
+ uint32_t state; /* enum pg_states */
+} __ABI_PACKED;
+
+struct cmd_pg_get_state_response {
+ uint32_t state; /* enum pg_states */
+} __ABI_PACKED;
+
+struct cmd_pg_get_name_response {
+ uint8_t name[MRQ_PG_NAME_MAXLEN];
+} __ABI_PACKED;
+
+struct cmd_pg_get_max_id_response {
+ uint32_t max_id;
+} __ABI_PACKED;
+
+/**
+ * @ingroup Powergating
+ * @brief request with #MRQ_PG
+ *
+ * Used by the sender of an #MRQ_PG message to control power
+ * partitions. The pg_request is split into several sub-commands. Some
+ * sub-commands require no additional data. Others have a sub-command
+ * specific payload
+ *
+ * |sub-command |payload |
+ * |----------------------------|-----------------------|
+ * |CMD_PG_QUERY_ABI | query_abi |
+ * |CMD_PG_SET_STATE | set_state |
+ * |CMD_PG_GET_STATE | - |
+ * |CMD_PG_GET_NAME | - |
+ * |CMD_PG_GET_MAX_ID | - |
+ *
+ */
+
+struct mrq_pg_request {
+ uint32_t cmd;
+ uint32_t id;
+ union {
+ struct cmd_pg_query_abi_request query_abi;
+ struct cmd_pg_set_state_request set_state;
+ } __UNION_ANON;
+} __ABI_PACKED;
+
+/**
+ * @ingroup Powergating
+ * @brief response to MRQ_PG
+ *
+ * Each sub-command supported by @ref mrq_pg_request may return
+ * sub-command-specific data. Some do and some do not as indicated in
+ * the following table
+ *
+ * |sub-command |payload |
+ * |----------------------------|-----------------------|
+ * |CMD_PG_QUERY_ABI | - |
+ * |CMD_PG_SET_STATE | - |
+ * |CMD_PG_GET_STATE | get_state |
+ * |CMD_PG_GET_NAME | get_name |
+ * |CMD_PG_GET_MAX_ID | get_max_id |
+ *
+ */
+
+struct mrq_pg_response {
+ union {
+ struct cmd_pg_get_state_response get_state;
+ struct cmd_pg_get_name_response get_name;
+ struct cmd_pg_get_max_id_response get_max_id;
+ } __UNION_ANON;
+} __ABI_PACKED;
+
+/**
+ * @ingroup MRQ_Codes
* @def MRQ_THERMAL
* @brief interact with BPMP thermal framework
*
@@ -1529,6 +1749,184 @@ struct mrq_trace_iter_request {
/** @} */
+/**
+ * @ingroup MRQ_Codes
+ * @def MRQ_RINGBUF_CONSOLE
+ * @brief A ring buffer debug console for BPMP
+ * @addtogroup RingbufConsole
+ *
+ * The ring buffer debug console aims to be a substitute for the UART debug
+ * console. The debug console is implemented with two ring buffers in the
+ * BPMP-FW, the RX (receive) and TX (transmit) buffers. Characters can be read
+ * and written to the buffers by the host via the MRQ interface.
+ *
+ * @{
+ */
+
+/**
+ * @brief Maximum number of bytes transferred in a single write command to the
+ * BPMP
+ *
+ * This is determined by the number of free bytes in the message struct,
+ * rounded down to a multiple of four.
+ */
+#define MRQ_RINGBUF_CONSOLE_MAX_WRITE_LEN 112
+
+/**
+ * @brief Maximum number of bytes transferred in a single read command to the
+ * BPMP
+ *
+ * This is determined by the number of free bytes in the message struct,
+ * rounded down to a multiple of four.
+ */
+#define MRQ_RINGBUF_CONSOLE_MAX_READ_LEN 116
+
+enum mrq_ringbuf_console_host_to_bpmp_cmd {
+ /**
+ * @brief Check whether the BPMP driver supports the specified request
+ * type
+ *
+ * mrq_response::err is 0 if the specified request is supported and
+ * -#BPMP_ENODEV otherwise
+ */
+ CMD_RINGBUF_CONSOLE_QUERY_ABI = 0,
+ /**
+ * @brief Perform a read operation on the BPMP TX buffer
+ *
+ * mrq_response::err is 0
+ */
+ CMD_RINGBUF_CONSOLE_READ = 1,
+ /**
+ * @brief Perform a write operation on the BPMP RX buffer
+ *
+ * mrq_response::err is 0 if the operation was successful and
+ * -#BPMP_ENODEV otherwise
+ */
+ CMD_RINGBUF_CONSOLE_WRITE = 2,
+ /**
+ * @brief Get the length of the buffer and the physical addresses of
+ * the buffer data and the head and tail counters
+ *
+ * mrq_response::err is 0 if the operation was successful and
+ * -#BPMP_ENODEV otherwise
+ */
+ CMD_RINGBUF_CONSOLE_GET_FIFO = 3,
+};
+
+/**
+ * @ingroup RingbufConsole
+ * @brief Host->BPMP request data for request type
+ * #CMD_RINGBUF_CONSOLE_QUERY_ABI
+ */
+struct cmd_ringbuf_console_query_abi_req {
+ /** @brief Command identifier to be queried */
+ uint32_t cmd;
+} __ABI_PACKED;
+
+/** @private */
+struct cmd_ringbuf_console_query_abi_resp {
+ EMPTY
+} __ABI_PACKED;
+
+/**
+ * @ingroup RingbufConsole
+ * @brief Host->BPMP request data for request type #CMD_RINGBUF_CONSOLE_READ
+ */
+struct cmd_ringbuf_console_read_req {
+ /**
+ * @brief Number of bytes requested to be read from the BPMP TX buffer
+ */
+ uint8_t len;
+} __ABI_PACKED;
+
+/**
+ * @ingroup RingbufConsole
+ * @brief BPMP->Host response data for request type #CMD_RINGBUF_CONSOLE_READ
+ */
+struct cmd_ringbuf_console_read_resp {
+ /** @brief The actual data read from the BPMP TX buffer */
+ uint8_t data[MRQ_RINGBUF_CONSOLE_MAX_READ_LEN];
+ /** @brief Number of bytes in cmd_ringbuf_console_read_resp::data */
+ uint8_t len;
+} __ABI_PACKED;
+
+/**
+ * @ingroup RingbufConsole
+ * @brief Host->BPMP request data for request type #CMD_RINGBUF_CONSOLE_WRITE
+ */
+struct cmd_ringbuf_console_write_req {
+ /** @brief The actual data to be written to the BPMP RX buffer */
+ uint8_t data[MRQ_RINGBUF_CONSOLE_MAX_WRITE_LEN];
+ /** @brief Number of bytes in cmd_ringbuf_console_write_req::data */
+ uint8_t len;
+} __ABI_PACKED;
+
+/**
+ * @ingroup RingbufConsole
+ * @brief BPMP->Host response data for request type #CMD_RINGBUF_CONSOLE_WRITE
+ */
+struct cmd_ringbuf_console_write_resp {
+ /** @brief Number of bytes of available space in the BPMP RX buffer */
+ uint32_t space_avail;
+ /** @brief Number of bytes that were written to the BPMP RX buffer */
+ uint8_t len;
+} __ABI_PACKED;
+
+/** @private */
+struct cmd_ringbuf_console_get_fifo_req {
+ EMPTY
+} __ABI_PACKED;
+
+/**
+ * @ingroup RingbufConsole
+ * @brief BPMP->Host reply data for request type #CMD_RINGBUF_CONSOLE_GET_FIFO
+ */
+struct cmd_ringbuf_console_get_fifo_resp {
+ /** @brief Physical address of the BPMP TX buffer */
+ uint64_t bpmp_tx_buf_addr;
+ /** @brief Physical address of the BPMP TX buffer head counter */
+ uint64_t bpmp_tx_head_addr;
+ /** @brief Physical address of the BPMP TX buffer tail counter */
+ uint64_t bpmp_tx_tail_addr;
+ /** @brief Length of the BPMP TX buffer */
+ uint32_t bpmp_tx_buf_len;
+} __ABI_PACKED;
+
+/**
+ * @ingroup RingbufConsole
+ * @brief Host->BPMP request data.
+ *
+ * Reply type is union #mrq_ringbuf_console_bpmp_to_host_response .
+ */
+struct mrq_ringbuf_console_host_to_bpmp_request {
+ /**
+ * @brief type of request. Values listed in enum
+ * #mrq_ringbuf_console_host_to_bpmp_cmd.
+ */
+ uint32_t type;
+ /** @brief request type specific parameters. */
+ union {
+ struct cmd_ringbuf_console_query_abi_req query_abi;
+ struct cmd_ringbuf_console_read_req read;
+ struct cmd_ringbuf_console_write_req write;
+ struct cmd_ringbuf_console_get_fifo_req get_fifo;
+ } __UNION_ANON;
+} __ABI_PACKED;
+
+/**
+ * @ingroup RingbufConsole
+ * @brief Host->BPMP reply data
+ *
+ * In response to struct #mrq_ringbuf_console_host_to_bpmp_request.
+ */
+union mrq_ringbuf_console_bpmp_to_host_response {
+ struct cmd_ringbuf_console_query_abi_resp query_abi;
+ struct cmd_ringbuf_console_read_resp read;
+ struct cmd_ringbuf_console_write_resp write;
+ struct cmd_ringbuf_console_get_fifo_resp get_fifo;
+} __ABI_PACKED;
+/** @} */
+
/*
* 4. Enumerations
*/