diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/dt-bindings/clock/tegra186-clock.h | 940 | ||||
| -rw-r--r-- | include/dt-bindings/mailbox/tegra186-hsp.h | 24 | ||||
| -rw-r--r-- | include/dt-bindings/pinctrl/qcom,pmic-gpio.h | 4 | ||||
| -rw-r--r-- | include/dt-bindings/pinctrl/qcom,pmic-mpp.h | 6 | ||||
| -rw-r--r-- | include/dt-bindings/power/tegra186-powergate.h | 39 | ||||
| -rw-r--r-- | include/dt-bindings/reset/oxsemi,ox810se.h | 53 | ||||
| -rw-r--r-- | include/dt-bindings/reset/oxsemi,ox820.h | 53 | ||||
| -rw-r--r-- | include/dt-bindings/reset/tegra186-reset.h | 217 | ||||
| -rw-r--r-- | include/linux/soc/qcom/wcnss_ctrl.h | 13 | ||||
| -rw-r--r-- | include/linux/soc/ti/ti_sci_protocol.h | 249 | ||||
| -rw-r--r-- | include/soc/at91/atmel-secumod.h | 19 | ||||
| -rw-r--r-- | include/soc/tegra/bpmp-abi.h | 1601 | ||||
| -rw-r--r-- | include/soc/tegra/bpmp.h | 141 | ||||
| -rw-r--r-- | include/soc/tegra/ivc.h | 109 | ||||
| -rw-r--r-- | include/soc/tegra/pmc.h | 126 |
15 files changed, 3563 insertions, 31 deletions
diff --git a/include/dt-bindings/clock/tegra186-clock.h b/include/dt-bindings/clock/tegra186-clock.h new file mode 100644 index 000000000000..f73d32098f99 --- /dev/null +++ b/include/dt-bindings/clock/tegra186-clock.h @@ -0,0 +1,940 @@ +/** @file */ + +#ifndef _MACH_T186_CLK_T186_H +#define _MACH_T186_CLK_T186_H + +/** + * @defgroup clock_ids Clock Identifiers + * @{ + * @defgroup extern_input external input clocks + * @{ + * @def TEGRA186_CLK_OSC + * @def TEGRA186_CLK_CLK_32K + * @def TEGRA186_CLK_DTV_INPUT + * @def TEGRA186_CLK_SOR0_PAD_CLKOUT + * @def TEGRA186_CLK_SOR1_PAD_CLKOUT + * @def TEGRA186_CLK_I2S1_SYNC_INPUT + * @def TEGRA186_CLK_I2S2_SYNC_INPUT + * @def TEGRA186_CLK_I2S3_SYNC_INPUT + * @def TEGRA186_CLK_I2S4_SYNC_INPUT + * @def TEGRA186_CLK_I2S5_SYNC_INPUT + * @def TEGRA186_CLK_I2S6_SYNC_INPUT + * @def TEGRA186_CLK_SPDIFIN_SYNC_INPUT + * @} + * + * @defgroup extern_output external output clocks + * @{ + * @def TEGRA186_CLK_EXTPERIPH1 + * @def TEGRA186_CLK_EXTPERIPH2 + * @def TEGRA186_CLK_EXTPERIPH3 + * @def TEGRA186_CLK_EXTPERIPH4 + * @} + * + * @defgroup display_clks display related clocks + * @{ + * @def TEGRA186_CLK_CEC + * @def TEGRA186_CLK_DSIC + * @def TEGRA186_CLK_DSIC_LP + * @def TEGRA186_CLK_DSID + * @def TEGRA186_CLK_DSID_LP + * @def TEGRA186_CLK_DPAUX1 + * @def TEGRA186_CLK_DPAUX + * @def TEGRA186_CLK_HDA2HDMICODEC + * @def TEGRA186_CLK_NVDISPLAY_DISP + * @def TEGRA186_CLK_NVDISPLAY_DSC + * @def TEGRA186_CLK_NVDISPLAY_P0 + * @def TEGRA186_CLK_NVDISPLAY_P1 + * @def TEGRA186_CLK_NVDISPLAY_P2 + * @def TEGRA186_CLK_NVDISPLAYHUB + * @def TEGRA186_CLK_SOR_SAFE + * @def TEGRA186_CLK_SOR0 + * @def TEGRA186_CLK_SOR0_OUT + * @def TEGRA186_CLK_SOR1 + * @def TEGRA186_CLK_SOR1_OUT + * @def TEGRA186_CLK_DSI + * @def TEGRA186_CLK_MIPI_CAL + * @def TEGRA186_CLK_DSIA_LP + * @def TEGRA186_CLK_DSIB + * @def TEGRA186_CLK_DSIB_LP + * @} + * + * @defgroup camera_clks camera related clocks + * @{ + * @def TEGRA186_CLK_NVCSI + * @def TEGRA186_CLK_NVCSILP + * @def TEGRA186_CLK_VI + * @} + * + * @defgroup audio_clks audio related clocks + * @{ + * @def TEGRA186_CLK_ACLK + * @def TEGRA186_CLK_ADSP + * @def TEGRA186_CLK_ADSPNEON + * @def TEGRA186_CLK_AHUB + * @def TEGRA186_CLK_APE + * @def TEGRA186_CLK_APB2APE + * @def TEGRA186_CLK_AUD_MCLK + * @def TEGRA186_CLK_DMIC1 + * @def TEGRA186_CLK_DMIC2 + * @def TEGRA186_CLK_DMIC3 + * @def TEGRA186_CLK_DMIC4 + * @def TEGRA186_CLK_DSPK1 + * @def TEGRA186_CLK_DSPK2 + * @def TEGRA186_CLK_HDA + * @def TEGRA186_CLK_HDA2CODEC_2X + * @def TEGRA186_CLK_I2S1 + * @def TEGRA186_CLK_I2S2 + * @def TEGRA186_CLK_I2S3 + * @def TEGRA186_CLK_I2S4 + * @def TEGRA186_CLK_I2S5 + * @def TEGRA186_CLK_I2S6 + * @def TEGRA186_CLK_MAUD + * @def TEGRA186_CLK_PLL_A_OUT0 + * @def TEGRA186_CLK_SPDIF_DOUBLER + * @def TEGRA186_CLK_SPDIF_IN + * @def TEGRA186_CLK_SPDIF_OUT + * @def TEGRA186_CLK_SYNC_DMIC1 + * @def TEGRA186_CLK_SYNC_DMIC2 + * @def TEGRA186_CLK_SYNC_DMIC3 + * @def TEGRA186_CLK_SYNC_DMIC4 + * @def TEGRA186_CLK_SYNC_DMIC5 + * @def TEGRA186_CLK_SYNC_DSPK1 + * @def TEGRA186_CLK_SYNC_DSPK2 + * @def TEGRA186_CLK_SYNC_I2S1 + * @def TEGRA186_CLK_SYNC_I2S2 + * @def TEGRA186_CLK_SYNC_I2S3 + * @def TEGRA186_CLK_SYNC_I2S4 + * @def TEGRA186_CLK_SYNC_I2S5 + * @def TEGRA186_CLK_SYNC_I2S6 + * @def TEGRA186_CLK_SYNC_SPDIF + * @} + * + * @defgroup uart_clks UART clocks + * @{ + * @def TEGRA186_CLK_AON_UART_FST_MIPI_CAL + * @def TEGRA186_CLK_UARTA + * @def TEGRA186_CLK_UARTB + * @def TEGRA186_CLK_UARTC + * @def TEGRA186_CLK_UARTD + * @def TEGRA186_CLK_UARTE + * @def TEGRA186_CLK_UARTF + * @def TEGRA186_CLK_UARTG + * @def TEGRA186_CLK_UART_FST_MIPI_CAL + * @} + * + * @defgroup i2c_clks I2C clocks + * @{ + * @def TEGRA186_CLK_AON_I2C_SLOW + * @def TEGRA186_CLK_I2C1 + * @def TEGRA186_CLK_I2C2 + * @def TEGRA186_CLK_I2C3 + * @def TEGRA186_CLK_I2C4 + * @def TEGRA186_CLK_I2C5 + * @def TEGRA186_CLK_I2C6 + * @def TEGRA186_CLK_I2C8 + * @def TEGRA186_CLK_I2C9 + * @def TEGRA186_CLK_I2C1 + * @def TEGRA186_CLK_I2C12 + * @def TEGRA186_CLK_I2C13 + * @def TEGRA186_CLK_I2C14 + * @def TEGRA186_CLK_I2C_SLOW + * @def TEGRA186_CLK_VI_I2C + * @} + * + * @defgroup spi_clks SPI clocks + * @{ + * @def TEGRA186_CLK_SPI1 + * @def TEGRA186_CLK_SPI2 + * @def TEGRA186_CLK_SPI3 + * @def TEGRA186_CLK_SPI4 + * @} + * + * @defgroup storage storage related clocks + * @{ + * @def TEGRA186_CLK_SATA + * @def TEGRA186_CLK_SATA_OOB + * @def TEGRA186_CLK_SATA_IOBIST + * @def TEGRA186_CLK_SDMMC_LEGACY_TM + * @def TEGRA186_CLK_SDMMC1 + * @def TEGRA186_CLK_SDMMC2 + * @def TEGRA186_CLK_SDMMC3 + * @def TEGRA186_CLK_SDMMC4 + * @def TEGRA186_CLK_QSPI + * @def TEGRA186_CLK_QSPI_OUT + * @def TEGRA186_CLK_UFSDEV_REF + * @def TEGRA186_CLK_UFSHC + * @} + * + * @defgroup pwm_clks PWM clocks + * @{ + * @def TEGRA186_CLK_PWM1 + * @def TEGRA186_CLK_PWM2 + * @def TEGRA186_CLK_PWM3 + * @def TEGRA186_CLK_PWM4 + * @def TEGRA186_CLK_PWM5 + * @def TEGRA186_CLK_PWM6 + * @def TEGRA186_CLK_PWM7 + * @def TEGRA186_CLK_PWM8 + * @} + * + * @defgroup plls PLLs and related clocks + * @{ + * @def TEGRA186_CLK_PLLREFE_OUT_GATED + * @def TEGRA186_CLK_PLLREFE_OUT1 + * @def TEGRA186_CLK_PLLD_OUT1 + * @def TEGRA186_CLK_PLLP_OUT0 + * @def TEGRA186_CLK_PLLP_OUT5 + * @def TEGRA186_CLK_PLLA + * @def TEGRA186_CLK_PLLE_PWRSEQ + * @def TEGRA186_CLK_PLLA_OUT1 + * @def TEGRA186_CLK_PLLREFE_REF + * @def TEGRA186_CLK_UPHY_PLL0_PWRSEQ + * @def TEGRA186_CLK_UPHY_PLL1_PWRSEQ + * @def TEGRA186_CLK_PLLREFE_PLLE_PASSTHROUGH + * @def TEGRA186_CLK_PLLREFE_PEX + * @def TEGRA186_CLK_PLLREFE_IDDQ + * @def TEGRA186_CLK_PLLC_OUT_AON + * @def TEGRA186_CLK_PLLC_OUT_ISP + * @def TEGRA186_CLK_PLLC_OUT_VE + * @def TEGRA186_CLK_PLLC4_OUT + * @def TEGRA186_CLK_PLLREFE_OUT + * @def TEGRA186_CLK_PLLREFE_PLL_REF + * @def TEGRA186_CLK_PLLE + * @def TEGRA186_CLK_PLLC + * @def TEGRA186_CLK_PLLP + * @def TEGRA186_CLK_PLLD + * @def TEGRA186_CLK_PLLD2 + * @def TEGRA186_CLK_PLLREFE_VCO + * @def TEGRA186_CLK_PLLC2 + * @def TEGRA186_CLK_PLLC3 + * @def TEGRA186_CLK_PLLDP + * @def TEGRA186_CLK_PLLC4_VCO + * @def TEGRA186_CLK_PLLA1 + * @def TEGRA186_CLK_PLLNVCSI + * @def TEGRA186_CLK_PLLDISPHUB + * @def TEGRA186_CLK_PLLD3 + * @def TEGRA186_CLK_PLLBPMPCAM + * @def TEGRA186_CLK_PLLAON + * @def TEGRA186_CLK_PLLU + * @def TEGRA186_CLK_PLLC4_VCO_DIV2 + * @def TEGRA186_CLK_PLL_REF + * @def TEGRA186_CLK_PLLREFE_OUT1_DIV5 + * @def TEGRA186_CLK_UTMIP_PLL_PWRSEQ + * @def TEGRA186_CLK_PLL_U_48M + * @def TEGRA186_CLK_PLL_U_480M + * @def TEGRA186_CLK_PLLC4_OUT0 + * @def TEGRA186_CLK_PLLC4_OUT1 + * @def TEGRA186_CLK_PLLC4_OUT2 + * @def TEGRA186_CLK_PLLC4_OUT_MUX + * @def TEGRA186_CLK_DFLLDISP_DIV + * @def TEGRA186_CLK_PLLDISPHUB_DIV + * @def TEGRA186_CLK_PLLP_DIV8 + * @} + * + * @defgroup nafll_clks NAFLL clock sources + * @{ + * @def TEGRA186_CLK_NAFLL_AXI_CBB + * @def TEGRA186_CLK_NAFLL_BCPU + * @def TEGRA186_CLK_NAFLL_BPMP + * @def TEGRA186_CLK_NAFLL_DISP + * @def TEGRA186_CLK_NAFLL_GPU + * @def TEGRA186_CLK_NAFLL_ISP + * @def TEGRA186_CLK_NAFLL_MCPU + * @def TEGRA186_CLK_NAFLL_NVDEC + * @def TEGRA186_CLK_NAFLL_NVENC + * @def TEGRA186_CLK_NAFLL_NVJPG + * @def TEGRA186_CLK_NAFLL_SCE + * @def TEGRA186_CLK_NAFLL_SE + * @def TEGRA186_CLK_NAFLL_TSEC + * @def TEGRA186_CLK_NAFLL_TSECB + * @def TEGRA186_CLK_NAFLL_VI + * @def TEGRA186_CLK_NAFLL_VIC + * @} + * + * @defgroup mphy MPHY related clocks + * @{ + * @def TEGRA186_CLK_MPHY_L0_RX_SYMB + * @def TEGRA186_CLK_MPHY_L0_RX_LS_BIT + * @def TEGRA186_CLK_MPHY_L0_TX_SYMB + * @def TEGRA186_CLK_MPHY_L0_TX_LS_3XBIT + * @def TEGRA186_CLK_MPHY_L0_RX_ANA + * @def TEGRA186_CLK_MPHY_L1_RX_ANA + * @def TEGRA186_CLK_MPHY_IOBIST + * @def TEGRA186_CLK_MPHY_TX_1MHZ_REF + * @def TEGRA186_CLK_MPHY_CORE_PLL_FIXED + * @} + * + * @defgroup eavb EAVB related clocks + * @{ + * @def TEGRA186_CLK_EQOS_AXI + * @def TEGRA186_CLK_EQOS_PTP_REF + * @def TEGRA186_CLK_EQOS_RX + * @def TEGRA186_CLK_EQOS_RX_INPUT + * @def TEGRA186_CLK_EQOS_TX + * @} + * + * @defgroup usb USB related clocks + * @{ + * @def TEGRA186_CLK_PEX_USB_PAD0_MGMT + * @def TEGRA186_CLK_PEX_USB_PAD1_MGMT + * @def TEGRA186_CLK_HSIC_TRK + * @def TEGRA186_CLK_USB2_TRK + * @def TEGRA186_CLK_USB2_HSIC_TRK + * @def TEGRA186_CLK_XUSB_CORE_SS + * @def TEGRA186_CLK_XUSB_CORE_DEV + * @def TEGRA186_CLK_XUSB_FALCON + * @def TEGRA186_CLK_XUSB_FS + * @def TEGRA186_CLK_XUSB + * @def TEGRA186_CLK_XUSB_DEV + * @def TEGRA186_CLK_XUSB_HOST + * @def TEGRA186_CLK_XUSB_SS + * @} + * + * @defgroup bigblock compute block related clocks + * @{ + * @def TEGRA186_CLK_GPCCLK + * @def TEGRA186_CLK_GPC2CLK + * @def TEGRA186_CLK_GPU + * @def TEGRA186_CLK_HOST1X + * @def TEGRA186_CLK_ISP + * @def TEGRA186_CLK_NVDEC + * @def TEGRA186_CLK_NVENC + * @def TEGRA186_CLK_NVJPG + * @def TEGRA186_CLK_SE + * @def TEGRA186_CLK_TSEC + * @def TEGRA186_CLK_TSECB + * @def TEGRA186_CLK_VIC + * @} + * + * @defgroup can CAN bus related clocks + * @{ + * @def TEGRA186_CLK_CAN1 + * @def TEGRA186_CLK_CAN1_HOST + * @def TEGRA186_CLK_CAN2 + * @def TEGRA186_CLK_CAN2_HOST + * @} + * + * @defgroup system basic system clocks + * @{ + * @def TEGRA186_CLK_ACTMON + * @def TEGRA186_CLK_AON_APB + * @def TEGRA186_CLK_AON_CPU_NIC + * @def TEGRA186_CLK_AON_NIC + * @def TEGRA186_CLK_AXI_CBB + * @def TEGRA186_CLK_BPMP_APB + * @def TEGRA186_CLK_BPMP_CPU_NIC + * @def TEGRA186_CLK_BPMP_NIC_RATE + * @def TEGRA186_CLK_CLK_M + * @def TEGRA186_CLK_EMC + * @def TEGRA186_CLK_MSS_ENCRYPT + * @def TEGRA186_CLK_SCE_APB + * @def TEGRA186_CLK_SCE_CPU_NIC + * @def TEGRA186_CLK_SCE_NIC + * @def TEGRA186_CLK_TSC + * @} + * + * @defgroup pcie_clks PCIe related clocks + * @{ + * @def TEGRA186_CLK_AFI + * @def TEGRA186_CLK_PCIE + * @def TEGRA186_CLK_PCIE2_IOBIST + * @def TEGRA186_CLK_PCIERX0 + * @def TEGRA186_CLK_PCIERX1 + * @def TEGRA186_CLK_PCIERX2 + * @def TEGRA186_CLK_PCIERX3 + * @def TEGRA186_CLK_PCIERX4 + * @} + */ + +/** @brief output of gate CLK_ENB_FUSE */ +#define TEGRA186_CLK_FUSE 0 +/** + * @brief It's not what you think + * @details output of gate CLK_ENB_GPU. This output connects to the GPU + * pwrclk. @warning: This is almost certainly not the clock you think + * it is. If you're looking for the clock of the graphics engine, see + * TEGRA186_GPCCLK + */ +#define TEGRA186_CLK_GPU 1 +/** @brief output of gate CLK_ENB_PCIE */ +#define TEGRA186_CLK_PCIE 3 +/** @brief output of the divider IPFS_CLK_DIVISOR */ +#define TEGRA186_CLK_AFI 4 +/** @brief output of gate CLK_ENB_PCIE2_IOBIST */ +#define TEGRA186_CLK_PCIE2_IOBIST 5 +/** @brief output of gate CLK_ENB_PCIERX0*/ +#define TEGRA186_CLK_PCIERX0 6 +/** @brief output of gate CLK_ENB_PCIERX1*/ +#define TEGRA186_CLK_PCIERX1 7 +/** @brief output of gate CLK_ENB_PCIERX2*/ +#define TEGRA186_CLK_PCIERX2 8 +/** @brief output of gate CLK_ENB_PCIERX3*/ +#define TEGRA186_CLK_PCIERX3 9 +/** @brief output of gate CLK_ENB_PCIERX4*/ +#define TEGRA186_CLK_PCIERX4 10 +/** @brief output branch of PLL_C for ISP, controlled by gate CLK_ENB_PLLC_OUT_ISP */ +#define TEGRA186_CLK_PLLC_OUT_ISP 11 +/** @brief output branch of PLL_C for VI, controlled by gate CLK_ENB_PLLC_OUT_VE */ +#define TEGRA186_CLK_PLLC_OUT_VE 12 +/** @brief output branch of PLL_C for AON domain, controlled by gate CLK_ENB_PLLC_OUT_AON */ +#define TEGRA186_CLK_PLLC_OUT_AON 13 +/** @brief output of gate CLK_ENB_SOR_SAFE */ +#define TEGRA186_CLK_SOR_SAFE 39 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_I2S2 */ +#define TEGRA186_CLK_I2S2 42 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_I2S3 */ +#define TEGRA186_CLK_I2S3 43 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_SPDF_IN */ +#define TEGRA186_CLK_SPDIF_IN 44 +/** @brief output of gate CLK_ENB_SPDIF_DOUBLER */ +#define TEGRA186_CLK_SPDIF_DOUBLER 45 +/** @clkdesc{spi_clks, out, mux, CLK_RST_CONTROLLER_CLK_SOURCE_SPI3} */ +#define TEGRA186_CLK_SPI3 46 +/** @clkdesc{i2c_clks, out, mux, CLK_RST_CONTROLLER_CLK_SOURCE_I2C1} */ +#define TEGRA186_CLK_I2C1 47 +/** @clkdesc{i2c_clks, out, mux, CLK_RST_CONTROLLER_CLK_SOURCE_I2C5} */ +#define TEGRA186_CLK_I2C5 48 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_SPI1 */ +#define TEGRA186_CLK_SPI1 49 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_ISP */ +#define TEGRA186_CLK_ISP 50 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_VI */ +#define TEGRA186_CLK_VI 51 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_SDMMC1 */ +#define TEGRA186_CLK_SDMMC1 52 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_SDMMC2 */ +#define TEGRA186_CLK_SDMMC2 53 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_SDMMC4 */ +#define TEGRA186_CLK_SDMMC4 54 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_UARTA */ +#define TEGRA186_CLK_UARTA 55 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_UARTB */ +#define TEGRA186_CLK_UARTB 56 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_HOST1X */ +#define TEGRA186_CLK_HOST1X 57 +/** + * @brief controls the EMC clock frequency. + * @details Doing a clk_set_rate on this clock will select the + * appropriate clock source, program the source rate and execute a + * specific sequence to switch to the new clock source for both memory + * controllers. This can be used to control the balance between memory + * throughput and memory controller power. + */ +#define TEGRA186_CLK_EMC 58 +/* @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_EXTPERIPH4 */ +#define TEGRA186_CLK_EXTPERIPH4 73 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_SPI4 */ +#define TEGRA186_CLK_SPI4 74 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_I2C3 */ +#define TEGRA186_CLK_I2C3 75 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_SDMMC3 */ +#define TEGRA186_CLK_SDMMC3 76 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_UARTD */ +#define TEGRA186_CLK_UARTD 77 +/** output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_I2S1 */ +#define TEGRA186_CLK_I2S1 79 +/** output of gate CLK_ENB_DTV */ +#define TEGRA186_CLK_DTV 80 +/** output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_TSEC */ +#define TEGRA186_CLK_TSEC 81 +/** @brief output of gate CLK_ENB_DP2 */ +#define TEGRA186_CLK_DP2 82 +/** output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_I2S4 */ +#define TEGRA186_CLK_I2S4 84 +/** output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_I2S5 */ +#define TEGRA186_CLK_I2S5 85 +/** output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_I2C4 */ +#define TEGRA186_CLK_I2C4 86 +/** output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_AHUB */ +#define TEGRA186_CLK_AHUB 87 +/** output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_HDA2CODEC_2X */ +#define TEGRA186_CLK_HDA2CODEC_2X 88 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_EXTPERIPH1 */ +#define TEGRA186_CLK_EXTPERIPH1 89 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_EXTPERIPH2 */ +#define TEGRA186_CLK_EXTPERIPH2 90 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_EXTPERIPH3 */ +#define TEGRA186_CLK_EXTPERIPH3 91 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_I2C_SLOW */ +#define TEGRA186_CLK_I2C_SLOW 92 +/** @brief output of the SOR1_CLK_SRC mux in CLK_RST_CONTROLLER_CLK_SOURCE_SOR1 */ +#define TEGRA186_CLK_SOR1 93 +/** @brief output of gate CLK_ENB_CEC */ +#define TEGRA186_CLK_CEC 94 +/** @brief output of gate CLK_ENB_DPAUX1 */ +#define TEGRA186_CLK_DPAUX1 95 +/** @brief output of gate CLK_ENB_DPAUX */ +#define TEGRA186_CLK_DPAUX 96 +/** @brief output of the SOR0_CLK_SRC mux in CLK_RST_CONTROLLER_CLK_SOURCE_SOR0 */ +#define TEGRA186_CLK_SOR0 97 +/** @brief output of gate CLK_ENB_HDA2HDMICODEC */ +#define TEGRA186_CLK_HDA2HDMICODEC 98 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_SATA */ +#define TEGRA186_CLK_SATA 99 +/** @brief output of gate CLK_ENB_SATA_OOB */ +#define TEGRA186_CLK_SATA_OOB 100 +/** @brief output of gate CLK_ENB_SATA_IOBIST */ +#define TEGRA186_CLK_SATA_IOBIST 101 +/** output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_HDA */ +#define TEGRA186_CLK_HDA 102 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_SE */ +#define TEGRA186_CLK_SE 103 +/** @brief output of gate CLK_ENB_APB2APE */ +#define TEGRA186_CLK_APB2APE 104 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_APE */ +#define TEGRA186_CLK_APE 105 +/** @brief output of gate CLK_ENB_IQC1 */ +#define TEGRA186_CLK_IQC1 106 +/** @brief output of gate CLK_ENB_IQC2 */ +#define TEGRA186_CLK_IQC2 107 +/** divide by 2 version of TEGRA186_CLK_PLLREFE_VCO */ +#define TEGRA186_CLK_PLLREFE_OUT 108 +/** @brief output of gate CLK_ENB_PLLREFE_PLL_REF */ +#define TEGRA186_CLK_PLLREFE_PLL_REF 109 +/** @brief output of gate CLK_ENB_PLLC4_OUT */ +#define TEGRA186_CLK_PLLC4_OUT 110 +/** @brief output of mux xusb_core_clk_switch on page 67 of T186_Clocks_IAS.doc */ +#define TEGRA186_CLK_XUSB 111 +/** controls xusb_dev_ce signal on page 66 and 67 of T186_Clocks_IAS.doc */ +#define TEGRA186_CLK_XUSB_DEV 112 +/** controls xusb_host_ce signal on page 67 of T186_Clocks_IAS.doc */ +#define TEGRA186_CLK_XUSB_HOST 113 +/** controls xusb_ss_ce signal on page 67 of T186_Clocks_IAS.doc */ +#define TEGRA186_CLK_XUSB_SS 114 +/** @brief output of gate CLK_ENB_DSI */ +#define TEGRA186_CLK_DSI 115 +/** @brief output of gate CLK_ENB_MIPI_CAL */ +#define TEGRA186_CLK_MIPI_CAL 116 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_DSIA_LP */ +#define TEGRA186_CLK_DSIA_LP 117 +/** @brief output of gate CLK_ENB_DSIB */ +#define TEGRA186_CLK_DSIB 118 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_DSIB_LP */ +#define TEGRA186_CLK_DSIB_LP 119 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_DMIC1 */ +#define TEGRA186_CLK_DMIC1 122 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_DMIC2 */ +#define TEGRA186_CLK_DMIC2 123 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_AUD_MCLK */ +#define TEGRA186_CLK_AUD_MCLK 124 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_I2C6 */ +#define TEGRA186_CLK_I2C6 125 +/**output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_UART_FST_MIPI_CAL */ +#define TEGRA186_CLK_UART_FST_MIPI_CAL 126 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_VIC */ +#define TEGRA186_CLK_VIC 127 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_SDMMC_LEGACY_TM */ +#define TEGRA186_CLK_SDMMC_LEGACY_TM 128 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_NVDEC */ +#define TEGRA186_CLK_NVDEC 129 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_NVJPG */ +#define TEGRA186_CLK_NVJPG 130 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_NVENC */ +#define TEGRA186_CLK_NVENC 131 +/** @brief output of the QSPI_CLK_SRC mux in CLK_RST_CONTROLLER_CLK_SOURCE_QSPI */ +#define TEGRA186_CLK_QSPI 132 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_VI_I2C */ +#define TEGRA186_CLK_VI_I2C 133 +/** @brief output of gate CLK_ENB_HSIC_TRK */ +#define TEGRA186_CLK_HSIC_TRK 134 +/** @brief output of gate CLK_ENB_USB2_TRK */ +#define TEGRA186_CLK_USB2_TRK 135 +/** output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_MAUD */ +#define TEGRA186_CLK_MAUD 136 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_TSECB */ +#define TEGRA186_CLK_TSECB 137 +/** @brief output of gate CLK_ENB_ADSP */ +#define TEGRA186_CLK_ADSP 138 +/** @brief output of gate CLK_ENB_ADSPNEON */ +#define TEGRA186_CLK_ADSPNEON 139 +/** @brief output of the divider CLK_RST_CONTROLLER_CLK_SOURCE_MPHY_L0_RX_LS_SYMB */ +#define TEGRA186_CLK_MPHY_L0_RX_SYMB 140 +/** @brief output of gate CLK_ENB_MPHY_L0_RX_LS_BIT */ +#define TEGRA186_CLK_MPHY_L0_RX_LS_BIT 141 +/** @brief output of the divider CLK_RST_CONTROLLER_CLK_SOURCE_MPHY_L0_TX_LS_SYMB */ +#define TEGRA186_CLK_MPHY_L0_TX_SYMB 142 +/** @brief output of gate CLK_ENB_MPHY_L0_TX_LS_3XBIT */ +#define TEGRA186_CLK_MPHY_L0_TX_LS_3XBIT 143 +/** @brief output of gate CLK_ENB_MPHY_L0_RX_ANA */ +#define TEGRA186_CLK_MPHY_L0_RX_ANA 144 +/** @brief output of gate CLK_ENB_MPHY_L1_RX_ANA */ +#define TEGRA186_CLK_MPHY_L1_RX_ANA 145 +/** @brief output of the divider CLK_RST_CONTROLLER_CLK_SOURCE_MPHY_IOBIST */ +#define TEGRA186_CLK_MPHY_IOBIST 146 +/** @brief output of the divider CLK_RST_CONTROLLER_CLK_SOURCE_MPHY_TX_1MHZ_REF */ +#define TEGRA186_CLK_MPHY_TX_1MHZ_REF 147 +/** @brief output of the divider CLK_RST_CONTROLLER_CLK_SOURCE_MPHY_CORE_PLL_FIXED */ +#define TEGRA186_CLK_MPHY_CORE_PLL_FIXED 148 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_AXI_CBB */ +#define TEGRA186_CLK_AXI_CBB 149 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_DMIC3 */ +#define TEGRA186_CLK_DMIC3 150 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_DMIC4 */ +#define TEGRA186_CLK_DMIC4 151 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_DSPK1 */ +#define TEGRA186_CLK_DSPK1 152 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_DSPK2 */ +#define TEGRA186_CLK_DSPK2 153 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_I2C6 */ +#define TEGRA186_CLK_I2S6 154 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_NVDISPLAY_P0 */ +#define TEGRA186_CLK_NVDISPLAY_P0 155 +/** @brief output of the NVDISPLAY_DISP_CLK_SRC mux in CLK_RST_CONTROLLER_CLK_SOURCE_NVDISPLAY_DISP */ +#define TEGRA186_CLK_NVDISPLAY_DISP 156 +/** @brief output of gate CLK_ENB_NVDISPLAY_DSC */ +#define TEGRA186_CLK_NVDISPLAY_DSC 157 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_NVDISPLAYHUB */ +#define TEGRA186_CLK_NVDISPLAYHUB 158 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_NVDISPLAY_P1 */ +#define TEGRA186_CLK_NVDISPLAY_P1 159 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_NVDISPLAY_P2 */ +#define TEGRA186_CLK_NVDISPLAY_P2 160 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_TACH */ +#define TEGRA186_CLK_TACH 166 +/** @brief output of gate CLK_ENB_EQOS */ +#define TEGRA186_CLK_EQOS_AXI 167 +/** @brief output of gate CLK_ENB_EQOS_RX */ +#define TEGRA186_CLK_EQOS_RX 168 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_UFSHC_CG_SYS */ +#define TEGRA186_CLK_UFSHC 178 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_UFSDEV_REF */ +#define TEGRA186_CLK_UFSDEV_REF 179 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_NVCSI */ +#define TEGRA186_CLK_NVCSI 180 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_NVCSILP */ +#define TEGRA186_CLK_NVCSILP 181 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_I2C7 */ +#define TEGRA186_CLK_I2C7 182 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_I2C9 */ +#define TEGRA186_CLK_I2C9 183 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_I2C12 */ +#define TEGRA186_CLK_I2C12 184 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_I2C13 */ +#define TEGRA186_CLK_I2C13 185 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_I2C14 */ +#define TEGRA186_CLK_I2C14 186 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_PWM1 */ +#define TEGRA186_CLK_PWM1 187 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_PWM2 */ +#define TEGRA186_CLK_PWM2 188 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_PWM3 */ +#define TEGRA186_CLK_PWM3 189 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_PWM5 */ +#define TEGRA186_CLK_PWM5 190 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_PWM6 */ +#define TEGRA186_CLK_PWM6 191 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_PWM7 */ +#define TEGRA186_CLK_PWM7 192 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_PWM8 */ +#define TEGRA186_CLK_PWM8 193 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_UARTE */ +#define TEGRA186_CLK_UARTE 194 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_UARTF */ +#define TEGRA186_CLK_UARTF 195 +/** @deprecated */ +#define TEGRA186_CLK_DBGAPB 196 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_BPMP_CPU_NIC */ +#define TEGRA186_CLK_BPMP_CPU_NIC 197 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_BPMP_APB */ +#define TEGRA186_CLK_BPMP_APB 199 +/** @brief output of mux controlled by TEGRA186_CLK_SOC_ACTMON */ +#define TEGRA186_CLK_ACTMON 201 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_AON_CPU_NIC */ +#define TEGRA186_CLK_AON_CPU_NIC 208 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_CAN1 */ +#define TEGRA186_CLK_CAN1 210 +/** @brief output of gate CLK_ENB_CAN1_HOST */ +#define TEGRA186_CLK_CAN1_HOST 211 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_CAN2 */ +#define TEGRA186_CLK_CAN2 212 +/** @brief output of gate CLK_ENB_CAN2_HOST */ +#define TEGRA186_CLK_CAN2_HOST 213 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_AON_APB */ +#define TEGRA186_CLK_AON_APB 214 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_UARTC */ +#define TEGRA186_CLK_UARTC 215 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_UARTG */ +#define TEGRA186_CLK_UARTG 216 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_AON_UART_FST_MIPI_CAL */ +#define TEGRA186_CLK_AON_UART_FST_MIPI_CAL 217 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_I2C2 */ +#define TEGRA186_CLK_I2C2 218 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_I2C8 */ +#define TEGRA186_CLK_I2C8 219 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_I2C10 */ +#define TEGRA186_CLK_I2C10 220 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_AON_I2C_SLOW */ +#define TEGRA186_CLK_AON_I2C_SLOW 221 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_SPI2 */ +#define TEGRA186_CLK_SPI2 222 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_DMIC5 */ +#define TEGRA186_CLK_DMIC5 223 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_AON_TOUCH */ +#define TEGRA186_CLK_AON_TOUCH 224 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_PWM4 */ +#define TEGRA186_CLK_PWM4 225 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_TSC. This clock object is read only and is used for all timers in the system. */ +#define TEGRA186_CLK_TSC 226 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_MSS_ENCRYPT */ +#define TEGRA186_CLK_MSS_ENCRYPT 227 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_SCE_CPU_NIC */ +#define TEGRA186_CLK_SCE_CPU_NIC 228 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_SCE_APB */ +#define TEGRA186_CLK_SCE_APB 230 +/** @brief output of gate CLK_ENB_DSIC */ +#define TEGRA186_CLK_DSIC 231 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_DSIC_LP */ +#define TEGRA186_CLK_DSIC_LP 232 +/** @brief output of gate CLK_ENB_DSID */ +#define TEGRA186_CLK_DSID 233 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_DSID_LP */ +#define TEGRA186_CLK_DSID_LP 234 +/** @brief output of the divider CLK_RST_CONTROLLER_CLK_SOURCE_PEX_SATA_USB_RX_BYP */ +#define TEGRA186_CLK_PEX_SATA_USB_RX_BYP 236 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_CLK_SOURCE_SPDIF_OUT */ +#define TEGRA186_CLK_SPDIF_OUT 238 +/** @brief output of the divider CLK_RST_CONTROLLER_CLK_SOURCE_EQOS_PTP_REF_CLK_0 */ +#define TEGRA186_CLK_EQOS_PTP_REF 239 +/** @brief output of the divider CLK_RST_CONTROLLER_CLK_SOURCE_EQOS_TX_CLK */ +#define TEGRA186_CLK_EQOS_TX 240 +/** @brief output of the divider CLK_RST_CONTROLLER_CLK_SOURCE_USB2_HSIC_TRK */ +#define TEGRA186_CLK_USB2_HSIC_TRK 241 +/** @brief output of mux xusb_ss_clk_switch on page 66 of T186_Clocks_IAS.doc */ +#define TEGRA186_CLK_XUSB_CORE_SS 242 +/** @brief output of mux xusb_core_dev_clk_switch on page 67 of T186_Clocks_IAS.doc */ +#define TEGRA186_CLK_XUSB_CORE_DEV 243 +/** @brief output of mux xusb_core_falcon_clk_switch on page 67 of T186_Clocks_IAS.doc */ +#define TEGRA186_CLK_XUSB_FALCON 244 +/** @brief output of mux xusb_fs_clk_switch on page 66 of T186_Clocks_IAS.doc */ +#define TEGRA186_CLK_XUSB_FS 245 +/** @brief output of the divider CLK_RST_CONTROLLER_PLLA_OUT */ +#define TEGRA186_CLK_PLL_A_OUT0 246 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_AUDIO_SYNC_CLK_I2S1 */ +#define TEGRA186_CLK_SYNC_I2S1 247 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_AUDIO_SYNC_CLK_I2S2 */ +#define TEGRA186_CLK_SYNC_I2S2 248 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_AUDIO_SYNC_CLK_I2S3 */ +#define TEGRA186_CLK_SYNC_I2S3 249 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_AUDIO_SYNC_CLK_I2S4 */ +#define TEGRA186_CLK_SYNC_I2S4 250 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_AUDIO_SYNC_CLK_I2S5 */ +#define TEGRA186_CLK_SYNC_I2S5 251 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_AUDIO_SYNC_CLK_I2S6 */ +#define TEGRA186_CLK_SYNC_I2S6 252 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_AUDIO_SYNC_CLK_DSPK1 */ +#define TEGRA186_CLK_SYNC_DSPK1 253 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_AUDIO_SYNC_CLK_DSPK2 */ +#define TEGRA186_CLK_SYNC_DSPK2 254 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_AUDIO_SYNC_CLK_DMIC1 */ +#define TEGRA186_CLK_SYNC_DMIC1 255 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_AUDIO_SYNC_CLK_DMIC2 */ +#define TEGRA186_CLK_SYNC_DMIC2 256 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_AUDIO_SYNC_CLK_DMIC3 */ +#define TEGRA186_CLK_SYNC_DMIC3 257 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_AUDIO_SYNC_CLK_DMIC4 */ +#define TEGRA186_CLK_SYNC_DMIC4 259 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_AUDIO_SYNC_CLK_SPDIF */ +#define TEGRA186_CLK_SYNC_SPDIF 260 +/** @brief output of gate CLK_ENB_PLLREFE_OUT */ +#define TEGRA186_CLK_PLLREFE_OUT_GATED 261 +/** @brief output of the divider PLLREFE_DIVP in CLK_RST_CONTROLLER_PLLREFE_BASE. PLLREFE has 2 outputs: + * * VCO/pdiv defined by this clock object + * * VCO/2 defined by TEGRA186_CLK_PLLREFE_OUT + */ +#define TEGRA186_CLK_PLLREFE_OUT1 262 +#define TEGRA186_CLK_PLLD_OUT1 267 +/** @brief output of the divider PLLP_DIVP in CLK_RST_CONTROLLER_PLLP_BASE */ +#define TEGRA186_CLK_PLLP_OUT0 269 +/** @brief output of the divider CLK_RST_CONTROLLER_PLLP_OUTC */ +#define TEGRA186_CLK_PLLP_OUT5 270 +/** PLL controlled by CLK_RST_CONTROLLER_PLLA_BASE for use by audio clocks */ +#define TEGRA186_CLK_PLLA 271 +/** @brief output of mux controlled by CLK_RST_CONTROLLER_ACLK_BURST_POLICY divided by the divider controlled by ACLK_CLK_DIVISOR in CLK_RST_CONTROLLER_SUPER_ACLK_DIVIDER */ +#define TEGRA186_CLK_ACLK 273 +/** fixed 48MHz clock divided down from TEGRA186_CLK_PLL_U */ +#define TEGRA186_CLK_PLL_U_48M 274 +/** fixed 480MHz clock divided down from TEGRA186_CLK_PLL_U */ +#define TEGRA186_CLK_PLL_U_480M 275 +/** @brief output of the divider PLLC4_DIVP in CLK_RST_CONTROLLER_PLLC4_BASE. Output frequency is TEGRA186_CLK_PLLC4_VCO/PLLC4_DIVP */ +#define TEGRA186_CLK_PLLC4_OUT0 276 +/** fixed /3 divider. Output frequency of this clock is TEGRA186_CLK_PLLC4_VCO/3 */ +#define TEGRA186_CLK_PLLC4_OUT1 277 +/** fixed /5 divider. Output frequency of this clock is TEGRA186_CLK_PLLC4_VCO/5 */ +#define TEGRA186_CLK_PLLC4_OUT2 278 +/** @brief output of mux controlled by PLLC4_CLK_SEL in CLK_RST_CONTROLLER_PLLC4_MISC1 */ +#define TEGRA186_CLK_PLLC4_OUT_MUX 279 +/** @brief output of divider NVDISPLAY_DISP_CLK_DIVISOR in CLK_RST_CONTROLLER_CLK_SOURCE_NVDISPLAY_DISP when DFLLDISP_DIV is selected in NVDISPLAY_DISP_CLK_SRC */ +#define TEGRA186_CLK_DFLLDISP_DIV 284 +/** @brief output of divider NVDISPLAY_DISP_CLK_DIVISOR in CLK_RST_CONTROLLER_CLK_SOURCE_NVDISPLAY_DISP when PLLDISPHUB_DIV is selected in NVDISPLAY_DISP_CLK_SRC */ +#define TEGRA186_CLK_PLLDISPHUB_DIV 285 +/** fixed /8 divider which is used as the input for TEGRA186_CLK_SOR_SAFE */ +#define TEGRA186_CLK_PLLP_DIV8 286 +/** @brief output of divider CLK_RST_CONTROLLER_BPMP_NIC_RATE */ +#define TEGRA186_CLK_BPMP_NIC 287 +/** @brief output of the divider CLK_RST_CONTROLLER_PLLA1_OUT1 */ +#define TEGRA186_CLK_PLL_A_OUT1 288 +/** @deprecated */ +#define TEGRA186_CLK_GPC2CLK 289 +/** A fake clock which must be enabled during KFUSE read operations to ensure adequate VDD_CORE voltage. */ +#define TEGRA186_CLK_KFUSE 293 +/** + * @brief controls the PLLE hardware sequencer. + * @details This clock only has enable and disable methods. When the + * PLLE hw sequencer is enabled, PLLE, will be enabled or disabled by + * hw based on the control signals from the PCIe, SATA and XUSB + * clocks. When the PLLE hw sequencer is disabled, the state of PLLE + * is controlled by sw using clk_enable/clk_disable on + * TEGRA186_CLK_PLLE. + */ +#define TEGRA186_CLK_PLLE_PWRSEQ 294 +/** fixed 60MHz clock divided down from, TEGRA186_CLK_PLL_U */ +#define TEGRA186_CLK_PLLREFE_REF 295 +/** @brief output of mux controlled by SOR0_CLK_SEL0 and SOR0_CLK_SEL1 in CLK_RST_CONTROLLER_CLK_SOURCE_SOR0 */ +#define TEGRA186_CLK_SOR0_OUT 296 +/** @brief output of mux controlled by SOR1_CLK_SEL0 and SOR1_CLK_SEL1 in CLK_RST_CONTROLLER_CLK_SOURCE_SOR1 */ +#define TEGRA186_CLK_SOR1_OUT 297 +/** @brief fixed /5 divider. Output frequency of this clock is TEGRA186_CLK_PLLREFE_OUT1/5. Used as input for TEGRA186_CLK_EQOS_AXI */ +#define TEGRA186_CLK_PLLREFE_OUT1_DIV5 298 +/** @brief controls the UTMIP_PLL (aka PLLU) hardware sqeuencer */ +#define TEGRA186_CLK_UTMIP_PLL_PWRSEQ 301 +/** @brief output of the divider CLK_RST_CONTROLLER_CLK_SOURCE_PEX_USB_PAD_PLL0_MGMT */ +#define TEGRA186_CLK_PEX_USB_PAD0_MGMT 302 +/** @brief output of the divider CLK_RST_CONTROLLER_CLK_SOURCE_PEX_USB_PAD_PLL1_MGMT */ +#define TEGRA186_CLK_PEX_USB_PAD1_MGMT 303 +/** @brief controls the UPHY_PLL0 hardware sqeuencer */ +#define TEGRA186_CLK_UPHY_PLL0_PWRSEQ 304 +/** @brief controls the UPHY_PLL1 hardware sqeuencer */ +#define TEGRA186_CLK_UPHY_PLL1_PWRSEQ 305 +/** @brief control for PLLREFE_IDDQ in CLK_RST_CONTROLLER_PLLREFE_MISC so the bypass output even be used when the PLL is disabled */ +#define TEGRA186_CLK_PLLREFE_PLLE_PASSTHROUGH 306 +/** @brief output of the mux controlled by PLLREFE_SEL_CLKIN_PEX in CLK_RST_CONTROLLER_PLLREFE_MISC */ +#define TEGRA186_CLK_PLLREFE_PEX 307 +/** @brief control for PLLREFE_IDDQ in CLK_RST_CONTROLLER_PLLREFE_MISC to turn on the PLL when enabled */ +#define TEGRA186_CLK_PLLREFE_IDDQ 308 +/** @brief output of the divider QSPI_CLK_DIV2_SEL in CLK_RST_CONTROLLER_CLK_SOURCE_QSPI */ +#define TEGRA186_CLK_QSPI_OUT 309 +/** + * @brief GPC2CLK-div-2 + * @details fixed /2 divider. Output frequency is + * TEGRA186_CLK_GPC2CLK/2. The frequency of this clock is the + * frequency at which the GPU graphics engine runs. */ +#define TEGRA186_CLK_GPCCLK 310 +/** @brief output of divider CLK_RST_CONTROLLER_AON_NIC_RATE */ +#define TEGRA186_CLK_AON_NIC 450 +/** @brief output of divider CLK_RST_CONTROLLER_SCE_NIC_RATE */ +#define TEGRA186_CLK_SCE_NIC 451 +/** Fixed 100MHz PLL for PCIe, SATA and superspeed USB */ +#define TEGRA186_CLK_PLLE 512 +/** @brief PLL controlled by CLK_RST_CONTROLLER_PLLC_BASE */ +#define TEGRA186_CLK_PLLC 513 +/** Fixed 408MHz PLL for use by peripheral clocks */ +#define TEGRA186_CLK_PLLP 516 +/** @deprecated */ +#define TEGRA186_CLK_PLL_P TEGRA186_CLK_PLLP +/** @brief PLL controlled by CLK_RST_CONTROLLER_PLLD_BASE for use by DSI */ +#define TEGRA186_CLK_PLLD 518 +/** @brief PLL controlled by CLK_RST_CONTROLLER_PLLD2_BASE for use by HDMI or DP */ +#define TEGRA186_CLK_PLLD2 519 +/** + * @brief PLL controlled by CLK_RST_CONTROLLER_PLLREFE_BASE. + * @details Note that this clock only controls the VCO output, before + * the post-divider. See TEGRA186_CLK_PLLREFE_OUT1 for more + * information. + */ +#define TEGRA186_CLK_PLLREFE_VCO 520 +/** @brief PLL controlled by CLK_RST_CONTROLLER_PLLC2_BASE */ +#define TEGRA186_CLK_PLLC2 521 +/** @brief PLL controlled by CLK_RST_CONTROLLER_PLLC3_BASE */ +#define TEGRA186_CLK_PLLC3 522 +/** @brief PLL controlled by CLK_RST_CONTROLLER_PLLDP_BASE for use as the DP link clock */ +#define TEGRA186_CLK_PLLDP 523 +/** @brief PLL controlled by CLK_RST_CONTROLLER_PLLC4_BASE */ +#define TEGRA186_CLK_PLLC4_VCO 524 +/** @brief PLL controlled by CLK_RST_CONTROLLER_PLLA1_BASE for use by audio clocks */ +#define TEGRA186_CLK_PLLA1 525 +/** @brief PLL controlled by CLK_RST_CONTROLLER_PLLNVCSI_BASE */ +#define TEGRA186_CLK_PLLNVCSI 526 +/** @brief PLL controlled by CLK_RST_CONTROLLER_PLLDISPHUB_BASE */ +#define TEGRA186_CLK_PLLDISPHUB 527 +/** @brief PLL controlled by CLK_RST_CONTROLLER_PLLD3_BASE for use by HDMI or DP */ +#define TEGRA186_CLK_PLLD3 528 +/** @brief PLL controlled by CLK_RST_CONTROLLER_PLLBPMPCAM_BASE */ +#define TEGRA186_CLK_PLLBPMPCAM 531 +/** @brief PLL controlled by CLK_RST_CONTROLLER_PLLAON_BASE for use by IP blocks in the AON domain */ +#define TEGRA186_CLK_PLLAON 532 +/** Fixed frequency 960MHz PLL for USB and EAVB */ +#define TEGRA186_CLK_PLLU 533 +/** fixed /2 divider. Output frequency is TEGRA186_CLK_PLLC4_VCO/2 */ +#define TEGRA186_CLK_PLLC4_VCO_DIV2 535 +/** @brief NAFLL clock source for AXI_CBB */ +#define TEGRA186_CLK_NAFLL_AXI_CBB 564 +/** @brief NAFLL clock source for BPMP */ +#define TEGRA186_CLK_NAFLL_BPMP 565 +/** @brief NAFLL clock source for ISP */ +#define TEGRA186_CLK_NAFLL_ISP 566 +/** @brief NAFLL clock source for NVDEC */ +#define TEGRA186_CLK_NAFLL_NVDEC 567 +/** @brief NAFLL clock source for NVENC */ +#define TEGRA186_CLK_NAFLL_NVENC 568 +/** @brief NAFLL clock source for NVJPG */ +#define TEGRA186_CLK_NAFLL_NVJPG 569 +/** @brief NAFLL clock source for SCE */ +#define TEGRA186_CLK_NAFLL_SCE 570 +/** @brief NAFLL clock source for SE */ +#define TEGRA186_CLK_NAFLL_SE 571 +/** @brief NAFLL clock source for TSEC */ +#define TEGRA186_CLK_NAFLL_TSEC 572 +/** @brief NAFLL clock source for TSECB */ +#define TEGRA186_CLK_NAFLL_TSECB 573 +/** @brief NAFLL clock source for VI */ +#define TEGRA186_CLK_NAFLL_VI 574 +/** @brief NAFLL clock source for VIC */ +#define TEGRA186_CLK_NAFLL_VIC 575 +/** @brief NAFLL clock source for DISP */ +#define TEGRA186_CLK_NAFLL_DISP 576 +/** @brief NAFLL clock source for GPU */ +#define TEGRA186_CLK_NAFLL_GPU 577 +/** @brief NAFLL clock source for M-CPU cluster */ +#define TEGRA186_CLK_NAFLL_MCPU 578 +/** @brief NAFLL clock source for B-CPU cluster */ +#define TEGRA186_CLK_NAFLL_BCPU 579 +/** @brief input from Tegra's CLK_32K_IN pad */ +#define TEGRA186_CLK_CLK_32K 608 +/** @brief output of divider CLK_RST_CONTROLLER_CLK_M_DIVIDE */ +#define TEGRA186_CLK_CLK_M 609 +/** @brief output of divider PLL_REF_DIV in CLK_RST_CONTROLLER_OSC_CTRL */ +#define TEGRA186_CLK_PLL_REF 610 +/** @brief input from Tegra's XTAL_IN */ +#define TEGRA186_CLK_OSC 612 +/** @brief clock recovered from EAVB input */ +#define TEGRA186_CLK_EQOS_RX_INPUT 613 +/** @brief clock recovered from DTV input */ +#define TEGRA186_CLK_DTV_INPUT 614 +/** @brief SOR0 brick output which feeds into SOR0_CLK_SEL mux in CLK_RST_CONTROLLER_CLK_SOURCE_SOR0*/ +#define TEGRA186_CLK_SOR0_PAD_CLKOUT 615 +/** @brief SOR1 brick output which feeds into SOR1_CLK_SEL mux in CLK_RST_CONTROLLER_CLK_SOURCE_SOR1*/ +#define TEGRA186_CLK_SOR1_PAD_CLKOUT 616 +/** @brief clock recovered from I2S1 input */ +#define TEGRA186_CLK_I2S1_SYNC_INPUT 617 +/** @brief clock recovered from I2S2 input */ +#define TEGRA186_CLK_I2S2_SYNC_INPUT 618 +/** @brief clock recovered from I2S3 input */ +#define TEGRA186_CLK_I2S3_SYNC_INPUT 619 +/** @brief clock recovered from I2S4 input */ +#define TEGRA186_CLK_I2S4_SYNC_INPUT 620 +/** @brief clock recovered from I2S5 input */ +#define TEGRA186_CLK_I2S5_SYNC_INPUT 621 +/** @brief clock recovered from I2S6 input */ +#define TEGRA186_CLK_I2S6_SYNC_INPUT 622 +/** @brief clock recovered from SPDIFIN input */ +#define TEGRA186_CLK_SPDIFIN_SYNC_INPUT 623 + +/** + * @brief subject to change + * @details maximum clock identifier value plus one. + */ +#define TEGRA186_CLK_CLK_MAX 624 + +/** @} */ + +#endif diff --git a/include/dt-bindings/mailbox/tegra186-hsp.h b/include/dt-bindings/mailbox/tegra186-hsp.h new file mode 100644 index 000000000000..f5d66e5f5f10 --- /dev/null +++ b/include/dt-bindings/mailbox/tegra186-hsp.h @@ -0,0 +1,24 @@ +/* + * This header provides constants for binding nvidia,tegra186-hsp. + */ + +#ifndef _DT_BINDINGS_MAILBOX_TEGRA186_HSP_H +#define _DT_BINDINGS_MAILBOX_TEGRA186_HSP_H + +/* + * These define the type of mailbox that is to be used (doorbell, shared + * mailbox, shared semaphore or arbitrated semaphore). + */ +#define TEGRA_HSP_MBOX_TYPE_DB 0x0 +#define TEGRA_HSP_MBOX_TYPE_SM 0x1 +#define TEGRA_HSP_MBOX_TYPE_SS 0x2 +#define TEGRA_HSP_MBOX_TYPE_AS 0x3 + +/* + * These defines represent the bit associated with the given master ID in the + * doorbell registers. + */ +#define TEGRA_HSP_DB_MASTER_CCPLEX 17 +#define TEGRA_HSP_DB_MASTER_BPMP 19 + +#endif diff --git a/include/dt-bindings/pinctrl/qcom,pmic-gpio.h b/include/dt-bindings/pinctrl/qcom,pmic-gpio.h index aafa76cb569d..d33f17c8a515 100644 --- a/include/dt-bindings/pinctrl/qcom,pmic-gpio.h +++ b/include/dt-bindings/pinctrl/qcom,pmic-gpio.h @@ -89,6 +89,10 @@ #define PMA8084_GPIO_S4 2 #define PMA8084_GPIO_L6 3 +#define PM8994_GPIO_VPH 0 +#define PM8994_GPIO_S4 2 +#define PM8994_GPIO_L12 3 + /* To be used with "function" */ #define PMIC_GPIO_FUNC_NORMAL "normal" #define PMIC_GPIO_FUNC_PAIRED "paired" diff --git a/include/dt-bindings/pinctrl/qcom,pmic-mpp.h b/include/dt-bindings/pinctrl/qcom,pmic-mpp.h index a15c1704d0ec..2e360d8f7801 100644 --- a/include/dt-bindings/pinctrl/qcom,pmic-mpp.h +++ b/include/dt-bindings/pinctrl/qcom,pmic-mpp.h @@ -65,6 +65,12 @@ #define PMA8084_MPP_S4 2 #define PMA8084_MPP_L6 3 +#define PM8994_MPP_VPH 0 +/* Only supported for MPP_05-MPP_08 */ +#define PM8994_MPP_L19 1 +#define PM8994_MPP_S4 2 +#define PM8994_MPP_L12 3 + /* * Analog Input - Set the source for analog input. * To be used with "qcom,amux-route" property diff --git a/include/dt-bindings/power/tegra186-powergate.h b/include/dt-bindings/power/tegra186-powergate.h new file mode 100644 index 000000000000..388d6e228dc8 --- /dev/null +++ b/include/dt-bindings/power/tegra186-powergate.h @@ -0,0 +1,39 @@ +/* + * Copyright (c) 2015-2016, NVIDIA CORPORATION. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef _DT_BINDINGS_POWER_TEGRA186_POWERGATE_H +#define _DT_BINDINGS_POWER_TEGRA186_POWERGATE_H + +#define TEGRA186_POWER_DOMAIN_AUD 0 +#define TEGRA186_POWER_DOMAIN_DFD 1 +#define TEGRA186_POWER_DOMAIN_DISP 2 +#define TEGRA186_POWER_DOMAIN_DISPB 3 +#define TEGRA186_POWER_DOMAIN_DISPC 4 +#define TEGRA186_POWER_DOMAIN_ISPA 5 +#define TEGRA186_POWER_DOMAIN_NVDEC 6 +#define TEGRA186_POWER_DOMAIN_NVJPG 7 +#define TEGRA186_POWER_DOMAIN_MPE 8 +#define TEGRA186_POWER_DOMAIN_PCX 9 +#define TEGRA186_POWER_DOMAIN_SAX 10 +#define TEGRA186_POWER_DOMAIN_VE 11 +#define TEGRA186_POWER_DOMAIN_VIC 12 +#define TEGRA186_POWER_DOMAIN_XUSBA 13 +#define TEGRA186_POWER_DOMAIN_XUSBB 14 +#define TEGRA186_POWER_DOMAIN_XUSBC 15 +#define TEGRA186_POWER_DOMAIN_GPU 43 +#define TEGRA186_POWER_DOMAIN_MAX 44 + +#endif diff --git a/include/dt-bindings/reset/oxsemi,ox810se.h b/include/dt-bindings/reset/oxsemi,ox810se.h new file mode 100644 index 000000000000..960c26e4504a --- /dev/null +++ b/include/dt-bindings/reset/oxsemi,ox810se.h @@ -0,0 +1,53 @@ +/* + * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef DT_RESET_OXSEMI_OX810SE_H +#define DT_RESET_OXSEMI_OX810SE_H + +#define RESET_ARM 0 +#define RESET_COPRO 1 +/* Reserved 2 */ +/* Reserved 3 */ +#define RESET_USBHS 4 +#define RESET_USBHSPHY 5 +#define RESET_MAC 6 +#define RESET_PCI 7 +#define RESET_DMA 8 +#define RESET_DPE 9 +#define RESET_DDR 10 +#define RESET_SATA 11 +#define RESET_SATA_LINK 12 +#define RESET_SATA_PHY 13 + /* Reserved 14 */ +#define RESET_NAND 15 +#define RESET_GPIO 16 +#define RESET_UART1 17 +#define RESET_UART2 18 +#define RESET_MISC 19 +#define RESET_I2S 20 +#define RESET_AHB_MON 21 +#define RESET_UART3 22 +#define RESET_UART4 23 +#define RESET_SGDMA 24 +/* Reserved 25 */ +/* Reserved 26 */ +/* Reserved 27 */ +/* Reserved 28 */ +/* Reserved 29 */ +/* Reserved 30 */ +#define RESET_BUS 31 + +#endif /* DT_RESET_OXSEMI_OX810SE_H */ diff --git a/include/dt-bindings/reset/oxsemi,ox820.h b/include/dt-bindings/reset/oxsemi,ox820.h new file mode 100644 index 000000000000..cc6797bf01d8 --- /dev/null +++ b/include/dt-bindings/reset/oxsemi,ox820.h @@ -0,0 +1,53 @@ +/* + * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef DT_RESET_OXSEMI_OX820_H +#define DT_RESET_OXSEMI_OX820_H + +#define RESET_SCU 0 +#define RESET_LEON 1 +#define RESET_ARM0 2 +#define RESET_ARM1 3 +#define RESET_USBHS 4 +#define RESET_USBPHYA 5 +#define RESET_MAC 6 +#define RESET_PCIEA 7 +#define RESET_SGDMA 8 +#define RESET_CIPHER 9 +#define RESET_DDR 10 +#define RESET_SATA 11 +#define RESET_SATA_LINK 12 +#define RESET_SATA_PHY 13 +#define RESET_PCIEPHY 14 +#define RESET_NAND 15 +#define RESET_GPIO 16 +#define RESET_UART1 17 +#define RESET_UART2 18 +#define RESET_MISC 19 +#define RESET_I2S 20 +#define RESET_SD 21 +#define RESET_MAC_2 22 +#define RESET_PCIEB 23 +#define RESET_VIDEO 24 +#define RESET_DDR_PHY 25 +#define RESET_USBPHYB 26 +#define RESET_USBDEV 27 +/* Reserved 29 */ +#define RESET_ARMDBG 29 +#define RESET_PLLA 30 +#define RESET_PLLB 31 + +#endif /* DT_RESET_OXSEMI_OX820_H */ diff --git a/include/dt-bindings/reset/tegra186-reset.h b/include/dt-bindings/reset/tegra186-reset.h new file mode 100644 index 000000000000..8a184e357955 --- /dev/null +++ b/include/dt-bindings/reset/tegra186-reset.h @@ -0,0 +1,217 @@ +/* + * Copyright (c) 2015, NVIDIA CORPORATION. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef _ABI_MACH_T186_RESET_T186_H_ +#define _ABI_MACH_T186_RESET_T186_H_ + + +#define TEGRA186_RESET_ACTMON 0 +#define TEGRA186_RESET_AFI 1 +#define TEGRA186_RESET_CEC 2 +#define TEGRA186_RESET_CSITE 3 +#define TEGRA186_RESET_DP2 4 +#define TEGRA186_RESET_DPAUX 5 +#define TEGRA186_RESET_DSI 6 +#define TEGRA186_RESET_DSIB 7 +#define TEGRA186_RESET_DTV 8 +#define TEGRA186_RESET_DVFS 9 +#define TEGRA186_RESET_ENTROPY 10 +#define TEGRA186_RESET_EXTPERIPH1 11 +#define TEGRA186_RESET_EXTPERIPH2 12 +#define TEGRA186_RESET_EXTPERIPH3 13 +#define TEGRA186_RESET_GPU 14 +#define TEGRA186_RESET_HDA 15 +#define TEGRA186_RESET_HDA2CODEC_2X 16 +#define TEGRA186_RESET_HDA2HDMICODEC 17 +#define TEGRA186_RESET_HOST1X 18 +#define TEGRA186_RESET_I2C1 19 +#define TEGRA186_RESET_I2C2 20 +#define TEGRA186_RESET_I2C3 21 +#define TEGRA186_RESET_I2C4 22 +#define TEGRA186_RESET_I2C5 23 +#define TEGRA186_RESET_I2C6 24 +#define TEGRA186_RESET_ISP 25 +#define TEGRA186_RESET_KFUSE 26 +#define TEGRA186_RESET_LA 27 +#define TEGRA186_RESET_MIPI_CAL 28 +#define TEGRA186_RESET_PCIE 29 +#define TEGRA186_RESET_PCIEXCLK 30 +#define TEGRA186_RESET_SATA 31 +#define TEGRA186_RESET_SATACOLD 32 +#define TEGRA186_RESET_SDMMC1 33 +#define TEGRA186_RESET_SDMMC2 34 +#define TEGRA186_RESET_SDMMC3 35 +#define TEGRA186_RESET_SDMMC4 36 +#define TEGRA186_RESET_SE 37 +#define TEGRA186_RESET_SOC_THERM 38 +#define TEGRA186_RESET_SOR0 39 +#define TEGRA186_RESET_SPI1 40 +#define TEGRA186_RESET_SPI2 41 +#define TEGRA186_RESET_SPI3 42 +#define TEGRA186_RESET_SPI4 43 +#define TEGRA186_RESET_TMR 44 +#define TEGRA186_RESET_TRIG_SYS 45 +#define TEGRA186_RESET_TSEC 46 +#define TEGRA186_RESET_UARTA 47 +#define TEGRA186_RESET_UARTB 48 +#define TEGRA186_RESET_UARTC 49 +#define TEGRA186_RESET_UARTD 50 +#define TEGRA186_RESET_VI 51 +#define TEGRA186_RESET_VIC 52 +#define TEGRA186_RESET_XUSB_DEV 53 +#define TEGRA186_RESET_XUSB_HOST 54 +#define TEGRA186_RESET_XUSB_PADCTL 55 +#define TEGRA186_RESET_XUSB_SS 56 +#define TEGRA186_RESET_AON_APB 57 +#define TEGRA186_RESET_AXI_CBB 58 +#define TEGRA186_RESET_BPMP_APB 59 +#define TEGRA186_RESET_CAN1 60 +#define TEGRA186_RESET_CAN2 61 +#define TEGRA186_RESET_DMIC5 62 +#define TEGRA186_RESET_DSIC 63 +#define TEGRA186_RESET_DSID 64 +#define TEGRA186_RESET_EMC_EMC 65 +#define TEGRA186_RESET_EMC_MEM 66 +#define TEGRA186_RESET_EMCSB_EMC 67 +#define TEGRA186_RESET_EMCSB_MEM 68 +#define TEGRA186_RESET_EQOS 69 +#define TEGRA186_RESET_GPCDMA 70 +#define TEGRA186_RESET_GPIO_CTL0 71 +#define TEGRA186_RESET_GPIO_CTL1 72 +#define TEGRA186_RESET_GPIO_CTL2 73 +#define TEGRA186_RESET_GPIO_CTL3 74 +#define TEGRA186_RESET_GPIO_CTL4 75 +#define TEGRA186_RESET_GPIO_CTL5 76 +#define TEGRA186_RESET_I2C10 77 +#define TEGRA186_RESET_I2C12 78 +#define TEGRA186_RESET_I2C13 79 +#define TEGRA186_RESET_I2C14 80 +#define TEGRA186_RESET_I2C7 81 +#define TEGRA186_RESET_I2C8 82 +#define TEGRA186_RESET_I2C9 83 +#define TEGRA186_RESET_JTAG2AXI 84 +#define TEGRA186_RESET_MPHY_IOBIST 85 +#define TEGRA186_RESET_MPHY_L0_RX 86 +#define TEGRA186_RESET_MPHY_L0_TX 87 +#define TEGRA186_RESET_NVCSI 88 +#define TEGRA186_RESET_NVDISPLAY0_HEAD0 89 +#define TEGRA186_RESET_NVDISPLAY0_HEAD1 90 +#define TEGRA186_RESET_NVDISPLAY0_HEAD2 91 +#define TEGRA186_RESET_NVDISPLAY0_MISC 92 +#define TEGRA186_RESET_NVDISPLAY0_WGRP0 93 +#define TEGRA186_RESET_NVDISPLAY0_WGRP1 94 +#define TEGRA186_RESET_NVDISPLAY0_WGRP2 95 +#define TEGRA186_RESET_NVDISPLAY0_WGRP3 96 +#define TEGRA186_RESET_NVDISPLAY0_WGRP4 97 +#define TEGRA186_RESET_NVDISPLAY0_WGRP5 98 +#define TEGRA186_RESET_PWM1 99 +#define TEGRA186_RESET_PWM2 100 +#define TEGRA186_RESET_PWM3 101 +#define TEGRA186_RESET_PWM4 102 +#define TEGRA186_RESET_PWM5 103 +#define TEGRA186_RESET_PWM6 104 +#define TEGRA186_RESET_PWM7 105 +#define TEGRA186_RESET_PWM8 106 +#define TEGRA186_RESET_SCE_APB 107 +#define TEGRA186_RESET_SOR1 108 +#define TEGRA186_RESET_TACH 109 +#define TEGRA186_RESET_TSC 110 +#define TEGRA186_RESET_UARTF 111 +#define TEGRA186_RESET_UARTG 112 +#define TEGRA186_RESET_UFSHC 113 +#define TEGRA186_RESET_UFSHC_AXI_M 114 +#define TEGRA186_RESET_UPHY 115 +#define TEGRA186_RESET_ADSP 116 +#define TEGRA186_RESET_ADSPDBG 117 +#define TEGRA186_RESET_ADSPINTF 118 +#define TEGRA186_RESET_ADSPNEON 119 +#define TEGRA186_RESET_ADSPPERIPH 120 +#define TEGRA186_RESET_ADSPSCU 121 +#define TEGRA186_RESET_ADSPWDT 122 +#define TEGRA186_RESET_APE 123 +#define TEGRA186_RESET_DPAUX1 124 +#define TEGRA186_RESET_NVDEC 125 +#define TEGRA186_RESET_NVENC 126 +#define TEGRA186_RESET_NVJPG 127 +#define TEGRA186_RESET_PEX_USB_UPHY 128 +#define TEGRA186_RESET_QSPI 129 +#define TEGRA186_RESET_TSECB 130 +#define TEGRA186_RESET_VI_I2C 131 +#define TEGRA186_RESET_UARTE 132 +#define TEGRA186_RESET_TOP_GTE 133 +#define TEGRA186_RESET_SHSP 134 +#define TEGRA186_RESET_PEX_USB_UPHY_L5 135 +#define TEGRA186_RESET_PEX_USB_UPHY_L4 136 +#define TEGRA186_RESET_PEX_USB_UPHY_L3 137 +#define TEGRA186_RESET_PEX_USB_UPHY_L2 138 +#define TEGRA186_RESET_PEX_USB_UPHY_L1 139 +#define TEGRA186_RESET_PEX_USB_UPHY_L0 140 +#define TEGRA186_RESET_PEX_USB_UPHY_PLL1 141 +#define TEGRA186_RESET_PEX_USB_UPHY_PLL0 142 +#define TEGRA186_RESET_TSCTNVI 143 +#define TEGRA186_RESET_EXTPERIPH4 144 +#define TEGRA186_RESET_DSIPADCTL 145 +#define TEGRA186_RESET_AUD_MCLK 146 +#define TEGRA186_RESET_MPHY_CLK_CTL 147 +#define TEGRA186_RESET_MPHY_L1_RX 148 +#define TEGRA186_RESET_MPHY_L1_TX 149 +#define TEGRA186_RESET_UFSHC_LP 150 +#define TEGRA186_RESET_BPMP_NIC 151 +#define TEGRA186_RESET_BPMP_NSYSPORESET 152 +#define TEGRA186_RESET_BPMP_NRESET 153 +#define TEGRA186_RESET_BPMP_DBGRESETN 154 +#define TEGRA186_RESET_BPMP_PRESETDBGN 155 +#define TEGRA186_RESET_BPMP_PM 156 +#define TEGRA186_RESET_BPMP_CVC 157 +#define TEGRA186_RESET_BPMP_DMA 158 +#define TEGRA186_RESET_BPMP_HSP 159 +#define TEGRA186_RESET_TSCTNBPMP 160 +#define TEGRA186_RESET_BPMP_TKE 161 +#define TEGRA186_RESET_BPMP_GTE 162 +#define TEGRA186_RESET_BPMP_PM_ACTMON 163 +#define TEGRA186_RESET_AON_NIC 164 +#define TEGRA186_RESET_AON_NSYSPORESET 165 +#define TEGRA186_RESET_AON_NRESET 166 +#define TEGRA186_RESET_AON_DBGRESETN 167 +#define TEGRA186_RESET_AON_PRESETDBGN 168 +#define TEGRA186_RESET_AON_ACTMON 169 +#define TEGRA186_RESET_AOPM 170 +#define TEGRA186_RESET_AOVC 171 +#define TEGRA186_RESET_AON_DMA 172 +#define TEGRA186_RESET_AON_GPIO 173 +#define TEGRA186_RESET_AON_HSP 174 +#define TEGRA186_RESET_TSCTNAON 175 +#define TEGRA186_RESET_AON_TKE 176 +#define TEGRA186_RESET_AON_GTE 177 +#define TEGRA186_RESET_SCE_NIC 178 +#define TEGRA186_RESET_SCE_NSYSPORESET 179 +#define TEGRA186_RESET_SCE_NRESET 180 +#define TEGRA186_RESET_SCE_DBGRESETN 181 +#define TEGRA186_RESET_SCE_PRESETDBGN 182 +#define TEGRA186_RESET_SCE_ACTMON 183 +#define TEGRA186_RESET_SCE_PM 184 +#define TEGRA186_RESET_SCE_DMA 185 +#define TEGRA186_RESET_SCE_HSP 186 +#define TEGRA186_RESET_TSCTNSCE 187 +#define TEGRA186_RESET_SCE_TKE 188 +#define TEGRA186_RESET_SCE_GTE 189 +#define TEGRA186_RESET_SCE_CFG 190 +#define TEGRA186_RESET_ADSP_ALL 191 +/** @brief controls the power up/down sequence of UFSHC PSW partition. Controls LP_PWR_READY, LP_ISOL_EN, and LP_RESET_N signals */ +#define TEGRA186_RESET_UFSHC_LP_SEQ 192 +#define TEGRA186_RESET_SIZE 193 + +#endif diff --git a/include/linux/soc/qcom/wcnss_ctrl.h b/include/linux/soc/qcom/wcnss_ctrl.h index a37bc5538f19..eab64976a73b 100644 --- a/include/linux/soc/qcom/wcnss_ctrl.h +++ b/include/linux/soc/qcom/wcnss_ctrl.h @@ -3,6 +3,19 @@ #include <linux/soc/qcom/smd.h> +#if IS_ENABLED(CONFIG_QCOM_WCNSS_CTRL) + struct qcom_smd_channel *qcom_wcnss_open_channel(void *wcnss, const char *name, qcom_smd_cb_t cb); +#else + +static inline struct qcom_smd_channel* +qcom_wcnss_open_channel(void *wcnss, const char *name, qcom_smd_cb_t cb) +{ + WARN_ON(1); + return ERR_PTR(-ENXIO); +} + +#endif + #endif diff --git a/include/linux/soc/ti/ti_sci_protocol.h b/include/linux/soc/ti/ti_sci_protocol.h new file mode 100644 index 000000000000..0ccbc138c26a --- /dev/null +++ b/include/linux/soc/ti/ti_sci_protocol.h @@ -0,0 +1,249 @@ +/* + * Texas Instruments System Control Interface Protocol + * + * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/ + * Nishanth Menon + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __TISCI_PROTOCOL_H +#define __TISCI_PROTOCOL_H + +/** + * struct ti_sci_version_info - version information structure + * @abi_major: Major ABI version. Change here implies risk of backward + * compatibility break. + * @abi_minor: Minor ABI version. Change here implies new feature addition, + * or compatible change in ABI. + * @firmware_revision: Firmware revision (not usually used). + * @firmware_description: Firmware description (not usually used). + */ +struct ti_sci_version_info { + u8 abi_major; + u8 abi_minor; + u16 firmware_revision; + char firmware_description[32]; +}; + +struct ti_sci_handle; + +/** + * struct ti_sci_core_ops - SoC Core Operations + * @reboot_device: Reboot the SoC + * Returns 0 for successful request(ideally should never return), + * else returns corresponding error value. + */ +struct ti_sci_core_ops { + int (*reboot_device)(const struct ti_sci_handle *handle); +}; + +/** + * struct ti_sci_dev_ops - Device control operations + * @get_device: Command to request for device managed by TISCI + * Returns 0 for successful exclusive request, else returns + * corresponding error message. + * @idle_device: Command to idle a device managed by TISCI + * Returns 0 for successful exclusive request, else returns + * corresponding error message. + * @put_device: Command to release a device managed by TISCI + * Returns 0 for successful release, else returns corresponding + * error message. + * @is_valid: Check if the device ID is a valid ID. + * Returns 0 if the ID is valid, else returns corresponding error. + * @get_context_loss_count: Command to retrieve context loss counter - this + * increments every time the device looses context. Overflow + * is possible. + * - count: pointer to u32 which will retrieve counter + * Returns 0 for successful information request and count has + * proper data, else returns corresponding error message. + * @is_idle: Reports back about device idle state + * - req_state: Returns requested idle state + * Returns 0 for successful information request and req_state and + * current_state has proper data, else returns corresponding error + * message. + * @is_stop: Reports back about device stop state + * - req_state: Returns requested stop state + * - current_state: Returns current stop state + * Returns 0 for successful information request and req_state and + * current_state has proper data, else returns corresponding error + * message. + * @is_on: Reports back about device ON(or active) state + * - req_state: Returns requested ON state + * - current_state: Returns current ON state + * Returns 0 for successful information request and req_state and + * current_state has proper data, else returns corresponding error + * message. + * @is_transitioning: Reports back if the device is in the middle of transition + * of state. + * -current_state: Returns 'true' if currently transitioning. + * @set_device_resets: Command to configure resets for device managed by TISCI. + * -reset_state: Device specific reset bit field + * Returns 0 for successful request, else returns + * corresponding error message. + * @get_device_resets: Command to read state of resets for device managed + * by TISCI. + * -reset_state: pointer to u32 which will retrieve resets + * Returns 0 for successful request, else returns + * corresponding error message. + * + * NOTE: for all these functions, the following parameters are generic in + * nature: + * -handle: Pointer to TISCI handle as retrieved by *ti_sci_get_handle + * -id: Device Identifier + * + * Request for the device - NOTE: the client MUST maintain integrity of + * usage count by balancing get_device with put_device. No refcounting is + * managed by driver for that purpose. + */ +struct ti_sci_dev_ops { + int (*get_device)(const struct ti_sci_handle *handle, u32 id); + int (*idle_device)(const struct ti_sci_handle *handle, u32 id); + int (*put_device)(const struct ti_sci_handle *handle, u32 id); + int (*is_valid)(const struct ti_sci_handle *handle, u32 id); + int (*get_context_loss_count)(const struct ti_sci_handle *handle, + u32 id, u32 *count); + int (*is_idle)(const struct ti_sci_handle *handle, u32 id, + bool *requested_state); + int (*is_stop)(const struct ti_sci_handle *handle, u32 id, + bool *req_state, bool *current_state); + int (*is_on)(const struct ti_sci_handle *handle, u32 id, + bool *req_state, bool *current_state); + int (*is_transitioning)(const struct ti_sci_handle *handle, u32 id, + bool *current_state); + int (*set_device_resets)(const struct ti_sci_handle *handle, u32 id, + u32 reset_state); + int (*get_device_resets)(const struct ti_sci_handle *handle, u32 id, + u32 *reset_state); +}; + +/** + * struct ti_sci_clk_ops - Clock control operations + * @get_clock: Request for activation of clock and manage by processor + * - needs_ssc: 'true' if Spread Spectrum clock is desired. + * - can_change_freq: 'true' if frequency change is desired. + * - enable_input_term: 'true' if input termination is desired. + * @idle_clock: Request for Idling a clock managed by processor + * @put_clock: Release the clock to be auto managed by TISCI + * @is_auto: Is the clock being auto managed + * - req_state: state indicating if the clock is auto managed + * @is_on: Is the clock ON + * - req_state: if the clock is requested to be forced ON + * - current_state: if the clock is currently ON + * @is_off: Is the clock OFF + * - req_state: if the clock is requested to be forced OFF + * - current_state: if the clock is currently Gated + * @set_parent: Set the clock source of a specific device clock + * - parent_id: Parent clock identifier to set. + * @get_parent: Get the current clock source of a specific device clock + * - parent_id: Parent clock identifier which is the parent. + * @get_num_parents: Get the number of parents of the current clock source + * - num_parents: returns the number of parent clocks. + * @get_best_match_freq: Find a best matching frequency for a frequency + * range. + * - match_freq: Best matching frequency in Hz. + * @set_freq: Set the Clock frequency + * @get_freq: Get the Clock frequency + * - current_freq: Frequency in Hz that the clock is at. + * + * NOTE: for all these functions, the following parameters are generic in + * nature: + * -handle: Pointer to TISCI handle as retrieved by *ti_sci_get_handle + * -did: Device identifier this request is for + * -cid: Clock identifier for the device for this request. + * Each device has it's own set of clock inputs. This indexes + * which clock input to modify. + * -min_freq: The minimum allowable frequency in Hz. This is the minimum + * allowable programmed frequency and does not account for clock + * tolerances and jitter. + * -target_freq: The target clock frequency in Hz. A frequency will be + * processed as close to this target frequency as possible. + * -max_freq: The maximum allowable frequency in Hz. This is the maximum + * allowable programmed frequency and does not account for clock + * tolerances and jitter. + * + * Request for the clock - NOTE: the client MUST maintain integrity of + * usage count by balancing get_clock with put_clock. No refcounting is + * managed by driver for that purpose. + */ +struct ti_sci_clk_ops { + int (*get_clock)(const struct ti_sci_handle *handle, u32 did, u8 cid, + bool needs_ssc, bool can_change_freq, + bool enable_input_term); + int (*idle_clock)(const struct ti_sci_handle *handle, u32 did, u8 cid); + int (*put_clock)(const struct ti_sci_handle *handle, u32 did, u8 cid); + int (*is_auto)(const struct ti_sci_handle *handle, u32 did, u8 cid, + bool *req_state); + int (*is_on)(const struct ti_sci_handle *handle, u32 did, u8 cid, + bool *req_state, bool *current_state); + int (*is_off)(const struct ti_sci_handle *handle, u32 did, u8 cid, + bool *req_state, bool *current_state); + int (*set_parent)(const struct ti_sci_handle *handle, u32 did, u8 cid, + u8 parent_id); + int (*get_parent)(const struct ti_sci_handle *handle, u32 did, u8 cid, + u8 *parent_id); + int (*get_num_parents)(const struct ti_sci_handle *handle, u32 did, + u8 cid, u8 *num_parents); + int (*get_best_match_freq)(const struct ti_sci_handle *handle, u32 did, + u8 cid, u64 min_freq, u64 target_freq, + u64 max_freq, u64 *match_freq); + int (*set_freq)(const struct ti_sci_handle *handle, u32 did, u8 cid, + u64 min_freq, u64 target_freq, u64 max_freq); + int (*get_freq)(const struct ti_sci_handle *handle, u32 did, u8 cid, + u64 *current_freq); +}; + +/** + * struct ti_sci_ops - Function support for TI SCI + * @dev_ops: Device specific operations + * @clk_ops: Clock specific operations + */ +struct ti_sci_ops { + struct ti_sci_core_ops core_ops; + struct ti_sci_dev_ops dev_ops; + struct ti_sci_clk_ops clk_ops; +}; + +/** + * struct ti_sci_handle - Handle returned to TI SCI clients for usage. + * @version: structure containing version information + * @ops: operations that are made available to TI SCI clients + */ +struct ti_sci_handle { + struct ti_sci_version_info version; + struct ti_sci_ops ops; +}; + +#if IS_ENABLED(CONFIG_TI_SCI_PROTOCOL) +const struct ti_sci_handle *ti_sci_get_handle(struct device *dev); +int ti_sci_put_handle(const struct ti_sci_handle *handle); +const struct ti_sci_handle *devm_ti_sci_get_handle(struct device *dev); + +#else /* CONFIG_TI_SCI_PROTOCOL */ + +static inline const struct ti_sci_handle *ti_sci_get_handle(struct device *dev) +{ + return ERR_PTR(-EINVAL); +} + +static inline int ti_sci_put_handle(const struct ti_sci_handle *handle) +{ + return -EINVAL; +} + +static inline +const struct ti_sci_handle *devm_ti_sci_get_handle(struct device *dev) +{ + return ERR_PTR(-EINVAL); +} + +#endif /* CONFIG_TI_SCI_PROTOCOL */ + +#endif /* __TISCI_PROTOCOL_H */ diff --git a/include/soc/at91/atmel-secumod.h b/include/soc/at91/atmel-secumod.h new file mode 100644 index 000000000000..22cd5d506926 --- /dev/null +++ b/include/soc/at91/atmel-secumod.h @@ -0,0 +1,19 @@ +/* + * Atmel Security Module register offsets and bit definitions. + * + * Copyright (C) 2016 Atmel + * + * Author: Alexandre Belloni <alexandre.belloni@free-electrons.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _LINUX_SOC_AT91_ATMEL_SECUMOD_H +#define _LINUX_SOC_AT91_ATMEL_SECUMOD_H + +#define AT91_SECUMOD_RAMRDY 0x14 +#define AT91_SECUMOD_RAMRDY_READY BIT(0) + +#endif /* _LINUX_SOC_AT91_ATMEL_SECUMOD_H */ diff --git a/include/soc/tegra/bpmp-abi.h b/include/soc/tegra/bpmp-abi.h new file mode 100644 index 000000000000..0aaef5960e29 --- /dev/null +++ b/include/soc/tegra/bpmp-abi.h @@ -0,0 +1,1601 @@ +/* + * Copyright (c) 2014-2016, NVIDIA CORPORATION. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef _ABI_BPMP_ABI_H_ +#define _ABI_BPMP_ABI_H_ + +#ifdef LK +#include <stdint.h> +#endif + +#ifndef __ABI_PACKED +#define __ABI_PACKED __attribute__((packed)) +#endif + +#ifdef NO_GCC_EXTENSIONS +#define EMPTY char empty; +#define EMPTY_ARRAY 1 +#else +#define EMPTY +#define EMPTY_ARRAY 0 +#endif + +#ifndef __UNION_ANON +#define __UNION_ANON +#endif +/** + * @file + */ + + +/** + * @defgroup MRQ MRQ Messages + * @brief Messages sent to/from BPMP via IPC + * @{ + * @defgroup MRQ_Format Message Format + * @defgroup MRQ_Codes Message Request (MRQ) Codes + * @defgroup MRQ_Payloads Message Payloads + * @defgroup Error_Codes Error Codes + * @} + */ + +/** + * @addtogroup MRQ_Format Message Format + * @{ + * The CPU requests the BPMP to perform a particular service by + * sending it an IVC frame containing a single MRQ message. An MRQ + * message consists of a @ref mrq_request followed by a payload whose + * format depends on mrq_request::mrq. + * + * The BPMP processes the data and replies with an IVC frame (on the + * same IVC channel) containing and MRQ response. An MRQ response + * consists of a @ref mrq_response followed by a payload whose format + * depends on the associated mrq_request::mrq. + * + * A well-defined subset of the MRQ messages that the CPU sends to the + * BPMP can lead to BPMP eventually sending an MRQ message to the + * CPU. For example, when the CPU uses an #MRQ_THERMAL message to set + * a thermal trip point, the BPMP may eventually send a single + * #MRQ_THERMAL message of its own to the CPU indicating that the trip + * point has been crossed. + * @} + */ + +/** + * @ingroup MRQ_Format + * @brief header for an MRQ message + * + * Provides the MRQ number for the MRQ message: #mrq. The remainder of + * the MRQ message is a payload (immediately following the + * mrq_request) whose format depends on mrq. + * + * @todo document the flags + */ +struct mrq_request { + /** @brief MRQ number of the request */ + uint32_t mrq; + /** @brief flags for the request */ + uint32_t flags; +} __ABI_PACKED; + +/** + * @ingroup MRQ_Format + * @brief header for an MRQ response + * + * Provides an error code for the associated MRQ message. The + * remainder of the MRQ response is a payload (immediately following + * the mrq_response) whose format depends on the associated + * mrq_request::mrq + * + * @todo document the flags + */ +struct mrq_response { + /** @brief error code for the MRQ request itself */ + int32_t err; + /** @brief flags for the response */ + uint32_t flags; +} __ABI_PACKED; + +/** + * @ingroup MRQ_Format + * Minimum needed size for an IPC message buffer + */ +#define MSG_MIN_SZ 128 +/** + * @ingroup MRQ_Format + * Minimum size guaranteed for data in an IPC message buffer + */ +#define MSG_DATA_MIN_SZ 120 + +/** + * @ingroup MRQ_Codes + * @name Legal MRQ codes + * These are the legal values for mrq_request::mrq + * @{ + */ + +#define MRQ_PING 0 +#define MRQ_QUERY_TAG 1 +#define MRQ_MODULE_LOAD 4 +#define MRQ_MODULE_UNLOAD 5 +#define MRQ_TRACE_MODIFY 7 +#define MRQ_WRITE_TRACE 8 +#define MRQ_THREADED_PING 9 +#define MRQ_MODULE_MAIL 11 +#define MRQ_DEBUGFS 19 +#define MRQ_RESET 20 +#define MRQ_I2C 21 +#define MRQ_CLK 22 +#define MRQ_QUERY_ABI 23 +#define MRQ_PG_READ_STATE 25 +#define MRQ_PG_UPDATE_STATE 26 +#define MRQ_THERMAL 27 +#define MRQ_CPU_VHINT 28 +#define MRQ_ABI_RATCHET 29 +#define MRQ_EMC_DVFS_LATENCY 31 +#define MRQ_TRACE_ITER 64 + +/** @} */ + +/** + * @ingroup MRQ_Codes + * @brief Maximum MRQ code to be sent by CPU software to + * BPMP. Subject to change in future + */ +#define MAX_CPU_MRQ_ID 64 + +/** + * @addtogroup MRQ_Payloads Message Payloads + * @{ + * @defgroup Ping + * @defgroup Query_Tag Query Tag + * @defgroup Module Loadable Modules + * @defgroup Trace + * @defgroup Debugfs + * @defgroup Reset + * @defgroup I2C + * @defgroup Clocks + * @defgroup ABI_info ABI Info + * @defgroup MC_Flush MC Flush + * @defgroup Powergating + * @defgroup Thermal + * @defgroup Vhint CPU Voltage hint + * @defgroup MRQ_Deprecated Deprecated MRQ messages + * @defgroup EMC + * @} + */ + + +/** + * @ingroup MRQ_Codes + * @def MRQ_PING + * @brief A simple ping + * + * * Platforms: All + * * Initiators: Any + * * Targets: Any + * * Request Payload: @ref mrq_ping_request + * * Response Payload: @ref mrq_ping_response + * + * @ingroup MRQ_Codes + * @def MRQ_THREADED_PING + * @brief A deeper ping + * + * * Platforms: All + * * Initiators: Any + * * Targets: BPMP + * * Request Payload: @ref mrq_ping_request + * * Response Payload: @ref mrq_ping_response + * + * Behavior is equivalent to a simple #MRQ_PING except that BPMP + * responds from a thread context (providing a slightly more robust + * sign of life). + * + */ + +/** + * @ingroup Ping + * @brief request with #MRQ_PING + * + * Used by the sender of an #MRQ_PING message to request a pong from + * recipient. The response from the recipient is computed based on + * #challenge. + */ +struct mrq_ping_request { +/** @brief arbitrarily chosen value */ + uint32_t challenge; +} __ABI_PACKED; + +/** + * @ingroup Ping + * @brief response to #MRQ_PING + * + * Sent in response to an #MRQ_PING message. #reply should be the + * mrq_ping_request challenge left shifted by 1 with the carry-bit + * dropped. + * + */ +struct mrq_ping_response { + /** @brief response to the MRQ_PING challege */ + uint32_t reply; +} __ABI_PACKED; + +/** + * @ingroup MRQ_Codes + * @def MRQ_QUERY_TAG + * @brief Query BPMP firmware's tag (i.e. version information) + * + * * Platforms: All + * * Initiators: CCPLEX + * * Targets: BPMP + * * Request Payload: @ref mrq_query_tag_request + * * Response Payload: N/A + * + */ + +/** + * @ingroup Query_Tag + * @brief request with #MRQ_QUERY_TAG + * + * Used by #MRQ_QUERY_TAG call to ask BPMP to fill in the memory + * pointed by #addr with BPMP firmware header. + * + * The sender is reponsible for ensuring that #addr is mapped in to + * the recipient's address map. + */ +struct mrq_query_tag_request { + /** @brief base address to store the firmware header */ + uint32_t addr; +} __ABI_PACKED; + +/** + * @ingroup MRQ_Codes + * @def MRQ_MODULE_LOAD + * @brief dynamically load a BPMP code module + * + * * Platforms: All + * * Initiators: CCPLEX + * * Targets: BPMP + * * Request Payload: @ref mrq_module_load_request + * * Response Payload: @ref mrq_module_load_response + * + * @note This MRQ is disabled on production systems + * + */ + +/** + * @ingroup Module + * @brief request with #MRQ_MODULE_LOAD + * + * Used by #MRQ_MODULE_LOAD calls to ask the recipient to dynamically + * load the code located at #phys_addr and having size #size + * bytes. #phys_addr is treated as a void pointer. + * + * The recipient copies the code from #phys_addr to locally allocated + * memory prior to responding to this message. + * + * @todo document the module header format + * + * The sender is responsible for ensuring that the code is mapped in + * the recipient's address map. + * + */ +struct mrq_module_load_request { + /** @brief base address of the code to load. Treated as (void *) */ + uint32_t phys_addr; /* (void *) */ + /** @brief size in bytes of code to load */ + uint32_t size; +} __ABI_PACKED; + +/** + * @ingroup Module + * @brief response to #MRQ_MODULE_LOAD + * + * @todo document mrq_response::err + */ +struct mrq_module_load_response { + /** @brief handle to the loaded module */ + uint32_t base; +} __ABI_PACKED; + +/** + * @ingroup MRQ_Codes + * @def MRQ_MODULE_UNLOAD + * @brief unload a previously loaded code module + * + * * Platforms: All + * * Initiators: CCPLEX + * * Targets: BPMP + * * Request Payload: @ref mrq_module_unload_request + * * Response Payload: N/A + * + * @note This MRQ is disabled on production systems + */ + +/** + * @ingroup Module + * @brief request with #MRQ_MODULE_UNLOAD + * + * Used by #MRQ_MODULE_UNLOAD calls to request that a previously loaded + * module be unloaded. + */ +struct mrq_module_unload_request { + /** @brief handle of the module to unload */ + uint32_t base; +} __ABI_PACKED; + +/** + * @ingroup MRQ_Codes + * @def MRQ_TRACE_MODIFY + * @brief modify the set of enabled trace events + * + * * Platforms: All + * * Initiators: CCPLEX + * * Targets: BPMP + * * Request Payload: @ref mrq_trace_modify_request + * * Response Payload: @ref mrq_trace_modify_response + * + * @note This MRQ is disabled on production systems + */ + +/** + * @ingroup Trace + * @brief request with #MRQ_TRACE_MODIFY + * + * Used by %MRQ_TRACE_MODIFY calls to enable or disable specify trace + * events. #set takes precedence for any bit set in both #set and + * #clr. + */ +struct mrq_trace_modify_request { + /** @brief bit mask of trace events to disable */ + uint32_t clr; + /** @brief bit mask of trace events to enable */ + uint32_t set; +} __ABI_PACKED; + +/** + * @ingroup Trace + * @brief response to #MRQ_TRACE_MODIFY + * + * Sent in repsonse to an #MRQ_TRACE_MODIFY message. #mask reflects the + * state of which events are enabled after the recipient acted on the + * message. + * + */ +struct mrq_trace_modify_response { + /** @brief bit mask of trace event enable states */ + uint32_t mask; +} __ABI_PACKED; + +/** + * @ingroup MRQ_Codes + * @def MRQ_WRITE_TRACE + * @brief Write trace data to a buffer + * + * * Platforms: All + * * Initiators: CCPLEX + * * Targets: BPMP + * * Request Payload: @ref mrq_write_trace_request + * * Response Payload: @ref mrq_write_trace_response + * + * mrq_response::err depends on the @ref mrq_write_trace_request field + * values. err is -#BPMP_EINVAL if size is zero or area is NULL or + * area is in an illegal range. A positive value for err indicates the + * number of bytes written to area. + * + * @note This MRQ is disabled on production systems + */ + +/** + * @ingroup Trace + * @brief request with #MRQ_WRITE_TRACE + * + * Used by MRQ_WRITE_TRACE calls to ask the recipient to copy trace + * data from the recipient's local buffer to the output buffer. #area + * is treated as a byte-aligned pointer in the recipient's address + * space. + * + * The sender is responsible for ensuring that the output + * buffer is mapped in the recipient's address map. The recipient is + * responsible for protecting its own code and data from accidental + * overwrites. + */ +struct mrq_write_trace_request { + /** @brief base address of output buffer */ + uint32_t area; + /** @brief size in bytes of the output buffer */ + uint32_t size; +} __ABI_PACKED; + +/** + * @ingroup Trace + * @brief response to #MRQ_WRITE_TRACE + * + * Once this response is sent, the respondent will not access the + * output buffer further. + */ +struct mrq_write_trace_response { + /** + * @brief flag whether more data remains in local buffer + * + * Value is 1 if the entire local trace buffer has been + * drained to the outputbuffer. Value is 0 otherwise. + */ + uint32_t eof; +} __ABI_PACKED; + +/** @private */ +struct mrq_threaded_ping_request { + uint32_t challenge; +} __ABI_PACKED; + +/** @private */ +struct mrq_threaded_ping_response { + uint32_t reply; +} __ABI_PACKED; + +/** + * @ingroup MRQ_Codes + * @def MRQ_MODULE_MAIL + * @brief send a message to a loadable module + * + * * Platforms: All + * * Initiators: Any + * * Targets: BPMP + * * Request Payload: @ref mrq_module_mail_request + * * Response Payload: @ref mrq_module_mail_response + * + * @note This MRQ is disabled on production systems + */ + +/** + * @ingroup Module + * @brief request with #MRQ_MODULE_MAIL + */ +struct mrq_module_mail_request { + /** @brief handle to the previously loaded module */ + uint32_t base; + /** @brief module-specific mail payload + * + * The length of data[ ] is unknown to the BPMP core firmware + * but it is limited to the size of an IPC message. + */ + uint8_t data[EMPTY_ARRAY]; +} __ABI_PACKED; + +/** + * @ingroup Module + * @brief response to #MRQ_MODULE_MAIL + */ +struct mrq_module_mail_response { + /** @brief module-specific mail payload + * + * The length of data[ ] is unknown to the BPMP core firmware + * but it is limited to the size of an IPC message. + */ + uint8_t data[EMPTY_ARRAY]; +} __ABI_PACKED; + +/** + * @ingroup MRQ_Codes + * @def MRQ_DEBUGFS + * @brief Interact with BPMP's debugfs file nodes + * + * * Platforms: T186 + * * Initiators: Any + * * Targets: BPMP + * * Request Payload: @ref mrq_debugfs_request + * * Response Payload: @ref mrq_debugfs_response + */ + +/** + * @addtogroup Debugfs + * @{ + * + * The BPMP firmware implements a pseudo-filesystem called + * debugfs. Any driver within the firmware may register with debugfs + * to expose an arbitrary set of "files" in the filesystem. When + * software on the CPU writes to a debugfs file, debugfs passes the + * written data to a callback provided by the driver. When software on + * the CPU reads a debugfs file, debugfs queries the driver for the + * data to return to the CPU. The intention of the debugfs filesystem + * is to provide information useful for debugging the system at + * runtime. + * + * @note The files exposed via debugfs are not part of the + * BPMP firmware's ABI. debugfs files may be added or removed in any + * given version of the firmware. Typically the semantics of a debugfs + * file are consistent from version to version but even that is not + * guaranteed. + * + * @} + */ +/** @ingroup Debugfs */ +enum mrq_debugfs_commands { + CMD_DEBUGFS_READ = 1, + CMD_DEBUGFS_WRITE = 2, + CMD_DEBUGFS_DUMPDIR = 3, + CMD_DEBUGFS_MAX +}; + +/** + * @ingroup Debugfs + * @brief parameters for CMD_DEBUGFS_READ/WRITE command + */ +struct cmd_debugfs_fileop_request { + /** @brief physical address pointing at filename */ + uint32_t fnameaddr; + /** @brief length in bytes of filename buffer */ + uint32_t fnamelen; + /** @brief physical address pointing to data buffer */ + uint32_t dataaddr; + /** @brief length in bytes of data buffer */ + uint32_t datalen; +} __ABI_PACKED; + +/** + * @ingroup Debugfs + * @brief parameters for CMD_DEBUGFS_READ/WRITE command + */ +struct cmd_debugfs_dumpdir_request { + /** @brief physical address pointing to data buffer */ + uint32_t dataaddr; + /** @brief length in bytes of data buffer */ + uint32_t datalen; +} __ABI_PACKED; + +/** + * @ingroup Debugfs + * @brief response data for CMD_DEBUGFS_READ/WRITE command + */ +struct cmd_debugfs_fileop_response { + /** @brief always 0 */ + uint32_t reserved; + /** @brief number of bytes read from or written to data buffer */ + uint32_t nbytes; +} __ABI_PACKED; + +/** + * @ingroup Debugfs + * @brief response data for CMD_DEBUGFS_DUMPDIR command + */ +struct cmd_debugfs_dumpdir_response { + /** @brief always 0 */ + uint32_t reserved; + /** @brief number of bytes read from or written to data buffer */ + uint32_t nbytes; +} __ABI_PACKED; + +/** + * @ingroup Debugfs + * @brief request with #MRQ_DEBUGFS. + * + * The sender of an MRQ_DEBUGFS message uses #cmd to specify a debugfs + * command to execute. Legal commands are the values of @ref + * mrq_debugfs_commands. Each command requires a specific additional + * payload of data. + * + * |command |payload| + * |-------------------|-------| + * |CMD_DEBUGFS_READ |fop | + * |CMD_DEBUGFS_WRITE |fop | + * |CMD_DEBUGFS_DUMPDIR|dumpdir| + */ +struct mrq_debugfs_request { + uint32_t cmd; + union { + struct cmd_debugfs_fileop_request fop; + struct cmd_debugfs_dumpdir_request dumpdir; + } __UNION_ANON; +} __ABI_PACKED; + +/** + * @ingroup Debugfs + */ +struct mrq_debugfs_response { + /** @brief always 0 */ + int32_t reserved; + union { + /** @brief response data for CMD_DEBUGFS_READ OR + * CMD_DEBUGFS_WRITE command + */ + struct cmd_debugfs_fileop_response fop; + /** @brief response data for CMD_DEBUGFS_DUMPDIR command */ + struct cmd_debugfs_dumpdir_response dumpdir; + } __UNION_ANON; +} __ABI_PACKED; + +/** + * @addtogroup Debugfs + * @{ + */ +#define DEBUGFS_S_ISDIR (1 << 9) +#define DEBUGFS_S_IRUSR (1 << 8) +#define DEBUGFS_S_IWUSR (1 << 7) +/** @} */ + + +/** + * @ingroup MRQ_Codes + * @def MRQ_RESET + * @brief reset an IP block + * + * * Platforms: T186 + * * Initiators: Any + * * Targets: BPMP + * * Request Payload: @ref mrq_reset_request + * * Response Payload: N/A + */ + +/** + * @ingroup Reset + */ +enum mrq_reset_commands { + CMD_RESET_ASSERT = 1, + CMD_RESET_DEASSERT = 2, + CMD_RESET_MODULE = 3, + CMD_RESET_MAX, /* not part of ABI and subject to change */ +}; + +/** + * @ingroup Reset + * @brief request with MRQ_RESET + * + * Used by the sender of an #MRQ_RESET message to request BPMP to + * assert or or deassert a given reset line. + */ +struct mrq_reset_request { + /** @brief reset action to perform (@enum mrq_reset_commands) */ + uint32_t cmd; + /** @brief id of the reset to affected */ + uint32_t reset_id; +} __ABI_PACKED; + +/** + * @ingroup MRQ_Codes + * @def MRQ_I2C + * @brief issue an i2c transaction + * + * * Platforms: T186 + * * Initiators: Any + * * Targets: BPMP + * * Request Payload: @ref mrq_i2c_request + * * Response Payload: @ref mrq_i2c_response + */ + +/** + * @addtogroup I2C + * @{ + */ +#define TEGRA_I2C_IPC_MAX_IN_BUF_SIZE (MSG_DATA_MIN_SZ - 12) +#define TEGRA_I2C_IPC_MAX_OUT_BUF_SIZE (MSG_DATA_MIN_SZ - 4) +/** @} */ + +/** + * @ingroup I2C + * @name Serial I2C flags + * Use these flags with serial_i2c_request::flags + * @{ + */ +#define SERIALI2C_TEN 0x0010 +#define SERIALI2C_RD 0x0001 +#define SERIALI2C_STOP 0x8000 +#define SERIALI2C_NOSTART 0x4000 +#define SERIALI2C_REV_DIR_ADDR 0x2000 +#define SERIALI2C_IGNORE_NAK 0x1000 +#define SERIALI2C_NO_RD_ACK 0x0800 +#define SERIALI2C_RECV_LEN 0x0400 +/** @} */ +/** @ingroup I2C */ +enum { + CMD_I2C_XFER = 1 +}; + +/** + * @ingroup I2C + * @brief serializable i2c request + * + * Instances of this structure are packed (little-endian) into + * cmd_i2c_xfer_request::data_buf. Each instance represents a single + * transaction (or a portion of a transaction with repeated starts) on + * an i2c bus. + * + * Because these structures are packed, some instances are likely to + * be misaligned. Additionally because #data is variable length, it is + * not possible to iterate through a serialized list of these + * structures without inspecting #len in each instance. It may be + * easier to serialize or deserialize cmd_i2c_xfer_request::data_buf + * manually rather than using this structure definition. +*/ +struct serial_i2c_request { + /** @brief I2C slave address */ + uint16_t addr; + /** @brief bitmask of SERIALI2C_ flags */ + uint16_t flags; + /** @brief length of I2C transaction in bytes */ + uint16_t len; + /** @brief for write transactions only, #len bytes of data */ + uint8_t data[]; +} __ABI_PACKED; + +/** + * @ingroup I2C + * @brief trigger one or more i2c transactions + */ +struct cmd_i2c_xfer_request { + /** @brief valid bus number from mach-t186/i2c-t186.h*/ + uint32_t bus_id; + + /** @brief count of valid bytes in #data_buf*/ + uint32_t data_size; + + /** @brief serialized packed instances of @ref serial_i2c_request*/ + uint8_t data_buf[TEGRA_I2C_IPC_MAX_IN_BUF_SIZE]; +} __ABI_PACKED; + +/** + * @ingroup I2C + * @brief container for data read from the i2c bus + * + * Processing an cmd_i2c_xfer_request::data_buf causes BPMP to execute + * zero or more I2C reads. The data read from the bus is serialized + * into #data_buf. + */ +struct cmd_i2c_xfer_response { + /** @brief count of valid bytes in #data_buf*/ + uint32_t data_size; + /** @brief i2c read data */ + uint8_t data_buf[TEGRA_I2C_IPC_MAX_OUT_BUF_SIZE]; +} __ABI_PACKED; + +/** + * @ingroup I2C + * @brief request with #MRQ_I2C + */ +struct mrq_i2c_request { + /** @brief always CMD_I2C_XFER (i.e. 1) */ + uint32_t cmd; + /** @brief parameters of the transfer request */ + struct cmd_i2c_xfer_request xfer; +} __ABI_PACKED; + +/** + * @ingroup I2C + * @brief response to #MRQ_I2C + */ +struct mrq_i2c_response { + struct cmd_i2c_xfer_response xfer; +} __ABI_PACKED; + +/** + * @ingroup MRQ_Codes + * @def MRQ_CLK + * + * * Platforms: T186 + * * Initiators: Any + * * Targets: BPMP + * * Request Payload: @ref mrq_clk_request + * * Response Payload: @ref mrq_clk_response + * @addtogroup Clocks + * @{ + */ + +/** + * @name MRQ_CLK sub-commands + * @{ + */ +enum { + CMD_CLK_GET_RATE = 1, + CMD_CLK_SET_RATE = 2, + CMD_CLK_ROUND_RATE = 3, + CMD_CLK_GET_PARENT = 4, + CMD_CLK_SET_PARENT = 5, + CMD_CLK_IS_ENABLED = 6, + CMD_CLK_ENABLE = 7, + CMD_CLK_DISABLE = 8, + CMD_CLK_GET_ALL_INFO = 14, + CMD_CLK_GET_MAX_CLK_ID = 15, + CMD_CLK_MAX, +}; +/** @} */ + +#define MRQ_CLK_NAME_MAXLEN 40 +#define MRQ_CLK_MAX_PARENTS 16 + +/** @private */ +struct cmd_clk_get_rate_request { + EMPTY +} __ABI_PACKED; + +struct cmd_clk_get_rate_response { + int64_t rate; +} __ABI_PACKED; + +struct cmd_clk_set_rate_request { + int32_t unused; + int64_t rate; +} __ABI_PACKED; + +struct cmd_clk_set_rate_response { + int64_t rate; +} __ABI_PACKED; + +struct cmd_clk_round_rate_request { + int32_t unused; + int64_t rate; +} __ABI_PACKED; + +struct cmd_clk_round_rate_response { + int64_t rate; +} __ABI_PACKED; + +/** @private */ +struct cmd_clk_get_parent_request { + EMPTY +} __ABI_PACKED; + +struct cmd_clk_get_parent_response { + uint32_t parent_id; +} __ABI_PACKED; + +struct cmd_clk_set_parent_request { + uint32_t parent_id; +} __ABI_PACKED; + +struct cmd_clk_set_parent_response { + uint32_t parent_id; +} __ABI_PACKED; + +/** @private */ +struct cmd_clk_is_enabled_request { + EMPTY +} __ABI_PACKED; + +struct cmd_clk_is_enabled_response { + int32_t state; +} __ABI_PACKED; + +/** @private */ +struct cmd_clk_enable_request { + EMPTY +} __ABI_PACKED; + +/** @private */ +struct cmd_clk_enable_response { + EMPTY +} __ABI_PACKED; + +/** @private */ +struct cmd_clk_disable_request { + EMPTY +} __ABI_PACKED; + +/** @private */ +struct cmd_clk_disable_response { + EMPTY +} __ABI_PACKED; + +/** @private */ +struct cmd_clk_get_all_info_request { + EMPTY +} __ABI_PACKED; + +struct cmd_clk_get_all_info_response { + uint32_t flags; + uint32_t parent; + uint32_t parents[MRQ_CLK_MAX_PARENTS]; + uint8_t num_parents; + uint8_t name[MRQ_CLK_NAME_MAXLEN]; +} __ABI_PACKED; + +/** @private */ +struct cmd_clk_get_max_clk_id_request { + EMPTY +} __ABI_PACKED; + +struct cmd_clk_get_max_clk_id_response { + uint32_t max_id; +} __ABI_PACKED; +/** @} */ + +/** + * @ingroup Clocks + * @brief request with #MRQ_CLK + * + * Used by the sender of an #MRQ_CLK message to control clocks. The + * clk_request is split into several sub-commands. Some sub-commands + * require no additional data. Others have a sub-command specific + * payload + * + * |sub-command |payload | + * |----------------------------|-----------------------| + * |CMD_CLK_GET_RATE |- | + * |CMD_CLK_SET_RATE |clk_set_rate | + * |CMD_CLK_ROUND_RATE |clk_round_rate | + * |CMD_CLK_GET_PARENT |- | + * |CMD_CLK_SET_PARENT |clk_set_parent | + * |CMD_CLK_IS_ENABLED |- | + * |CMD_CLK_ENABLE |- | + * |CMD_CLK_DISABLE |- | + * |CMD_CLK_GET_ALL_INFO |- | + * |CMD_CLK_GET_MAX_CLK_ID |- | + * + */ + +struct mrq_clk_request { + /** @brief sub-command and clock id concatenated to 32-bit word. + * - bits[31..24] is the sub-cmd. + * - bits[23..0] is the clock id + */ + uint32_t cmd_and_id; + + union { + /** @private */ + struct cmd_clk_get_rate_request clk_get_rate; + struct cmd_clk_set_rate_request clk_set_rate; + struct cmd_clk_round_rate_request clk_round_rate; + /** @private */ + struct cmd_clk_get_parent_request clk_get_parent; + struct cmd_clk_set_parent_request clk_set_parent; + /** @private */ + struct cmd_clk_enable_request clk_enable; + /** @private */ + struct cmd_clk_disable_request clk_disable; + /** @private */ + struct cmd_clk_is_enabled_request clk_is_enabled; + /** @private */ + struct cmd_clk_get_all_info_request clk_get_all_info; + /** @private */ + struct cmd_clk_get_max_clk_id_request clk_get_max_clk_id; + } __UNION_ANON; +} __ABI_PACKED; + +/** + * @ingroup Clocks + * @brief response to MRQ_CLK + * + * Each sub-command supported by @ref mrq_clk_request may return + * sub-command-specific data. Some do and some do not as indicated in + * the following table + * + * |sub-command |payload | + * |----------------------------|------------------------| + * |CMD_CLK_GET_RATE |clk_get_rate | + * |CMD_CLK_SET_RATE |clk_set_rate | + * |CMD_CLK_ROUND_RATE |clk_round_rate | + * |CMD_CLK_GET_PARENT |clk_get_parent | + * |CMD_CLK_SET_PARENT |clk_set_parent | + * |CMD_CLK_IS_ENABLED |clk_is_enabled | + * |CMD_CLK_ENABLE |- | + * |CMD_CLK_DISABLE |- | + * |CMD_CLK_GET_ALL_INFO |clk_get_all_info | + * |CMD_CLK_GET_MAX_CLK_ID |clk_get_max_id | + * + */ + +struct mrq_clk_response { + union { + struct cmd_clk_get_rate_response clk_get_rate; + struct cmd_clk_set_rate_response clk_set_rate; + struct cmd_clk_round_rate_response clk_round_rate; + struct cmd_clk_get_parent_response clk_get_parent; + struct cmd_clk_set_parent_response clk_set_parent; + /** @private */ + struct cmd_clk_enable_response clk_enable; + /** @private */ + struct cmd_clk_disable_response clk_disable; + struct cmd_clk_is_enabled_response clk_is_enabled; + struct cmd_clk_get_all_info_response clk_get_all_info; + struct cmd_clk_get_max_clk_id_response clk_get_max_clk_id; + } __UNION_ANON; +} __ABI_PACKED; + +/** + * @ingroup MRQ_Codes + * @def MRQ_QUERY_ABI + * @brief check if an MRQ is implemented + * + * * Platforms: All + * * Initiators: Any + * * Targets: Any + * * Request Payload: @ref mrq_query_abi_request + * * Response Payload: @ref mrq_query_abi_response + */ + +/** + * @ingroup ABI_info + * @brief request with MRQ_QUERY_ABI + * + * Used by #MRQ_QUERY_ABI call to check if MRQ code #mrq is supported + * by the recipient. + */ +struct mrq_query_abi_request { + /** @brief MRQ code to query */ + uint32_t mrq; +} __ABI_PACKED; + +/** + * @ingroup ABI_info + * @brief response to MRQ_QUERY_ABI + */ +struct mrq_query_abi_response { + /** @brief 0 if queried MRQ is supported. Else, -#BPMP_ENODEV */ + int32_t status; +} __ABI_PACKED; + +/** + * @ingroup MRQ_Codes + * @def MRQ_PG_READ_STATE + * @brief read the power-gating state of a partition + * + * * Platforms: T186 + * * Initiators: Any + * * Targets: BPMP + * * Request Payload: @ref mrq_pg_read_state_request + * * Response Payload: @ref mrq_pg_read_state_response + * @addtogroup Powergating + * @{ + */ + +/** + * @brief request with #MRQ_PG_READ_STATE + * + * Used by MRQ_PG_READ_STATE call to read the current state of a + * partition. + */ +struct mrq_pg_read_state_request { + /** @brief ID of partition */ + uint32_t partition_id; +} __ABI_PACKED; + +/** + * @brief response to MRQ_PG_READ_STATE + * @todo define possible errors. + */ +struct mrq_pg_read_state_response { + /** @brief read as don't care */ + uint32_t sram_state; + /** @brief state of power partition + * * 0 : off + * * 1 : on + */ + uint32_t logic_state; +} __ABI_PACKED; + +/** @} */ + +/** + * @ingroup MRQ_Codes + * @def MRQ_PG_UPDATE_STATE + * @brief modify the power-gating state of a partition + * + * * Platforms: T186 + * * Initiators: Any + * * Targets: BPMP + * * Request Payload: @ref mrq_pg_update_state_request + * * Response Payload: N/A + * @addtogroup Powergating + * @{ + */ + +/** + * @brief request with mrq_pg_update_state_request + * + * Used by #MRQ_PG_UPDATE_STATE call to request BPMP to change the + * state of a power partition #partition_id. + */ +struct mrq_pg_update_state_request { + /** @brief ID of partition */ + uint32_t partition_id; + /** @brief secondary control of power partition + * @details Ignored by many versions of the BPMP + * firmware. For maximum compatibility, set the value + * according to @logic_state + * * 0x1: power ON partition (@ref logic_state == 0x3) + * * 0x3: power OFF partition (@ref logic_state == 0x1) + */ + uint32_t sram_state; + /** @brief controls state of power partition, legal values are + * * 0x1 : power OFF partition + * * 0x3 : power ON partition + */ + uint32_t logic_state; + /** @brief change state of clocks of the power partition, legal values + * * 0x0 : do not change clock state + * * 0x1 : disable partition clocks (only applicable when + * @ref logic_state == 0x1) + * * 0x3 : enable partition clocks (only applicable when + * @ref logic_state == 0x3) + */ + uint32_t clock_state; +} __ABI_PACKED; +/** @} */ + +/** + * @ingroup MRQ_Codes + * @def MRQ_THERMAL + * @brief interact with BPMP thermal framework + * + * * Platforms: T186 + * * Initiators: Any + * * Targets: Any + * * Request Payload: TODO + * * Response Payload: TODO + * + * @addtogroup Thermal + * + * The BPMP firmware includes a thermal framework. Drivers within the + * bpmp firmware register with the framework to provide thermal + * zones. Each thermal zone corresponds to an entity whose temperature + * can be measured. The framework also has a notion of trip points. A + * trip point consists of a thermal zone id, a temperature, and a + * callback routine. The framework invokes the callback when the zone + * hits the indicated temperature. The BPMP firmware uses this thermal + * framework interally to implement various temperature-dependent + * functions. + * + * Software on the CPU can use #MRQ_THERMAL (with payload @ref + * mrq_thermal_host_to_bpmp_request) to interact with the BPMP thermal + * framework. The CPU must It can query the number of supported zones, + * query zone temperatures, and set trip points. + * + * When a trip point set by the CPU gets crossed, BPMP firmware issues + * an IPC to the CPU having mrq_request::mrq = #MRQ_THERMAL and a + * payload of @ref mrq_thermal_bpmp_to_host_request. + * @{ + */ +enum mrq_thermal_host_to_bpmp_cmd { + /** + * @brief Check whether the BPMP driver supports the specified + * request type. + * + * Host needs to supply request parameters. + * + * mrq_response::err is 0 if the specified request is + * supported and -#BPMP_ENODEV otherwise. + */ + CMD_THERMAL_QUERY_ABI = 0, + + /** + * @brief Get the current temperature of the specified zone. + * + * Host needs to supply request parameters. + * + * mrq_response::err is + * * 0: Temperature query succeeded. + * * -#BPMP_EINVAL: Invalid request parameters. + * * -#BPMP_ENOENT: No driver registered for thermal zone.. + * * -#BPMP_EFAULT: Problem reading temperature measurement. + */ + CMD_THERMAL_GET_TEMP = 1, + + /** + * @brief Enable or disable and set the lower and upper + * thermal limits for a thermal trip point. Each zone has + * one trip point. + * + * Host needs to supply request parameters. Once the + * temperature hits a trip point, the BPMP will send a message + * to the CPU having MRQ=MRQ_THERMAL and + * type=CMD_THERMAL_HOST_TRIP_REACHED + * + * mrq_response::err is + * * 0: Trip successfully set. + * * -#BPMP_EINVAL: Invalid request parameters. + * * -#BPMP_ENOENT: No driver registered for thermal zone. + * * -#BPMP_EFAULT: Problem setting trip point. + */ + CMD_THERMAL_SET_TRIP = 2, + + /** + * @brief Get the number of supported thermal zones. + * + * No request parameters required. + * + * mrq_response::err is always 0, indicating success. + */ + CMD_THERMAL_GET_NUM_ZONES = 3, + + /** @brief: number of supported host-to-bpmp commands. May + * increase in future + */ + CMD_THERMAL_HOST_TO_BPMP_NUM +}; + +enum mrq_thermal_bpmp_to_host_cmd { + /** + * @brief Indication that the temperature for a zone has + * exceeded the range indicated in the thermal trip point + * for the zone. + * + * BPMP needs to supply request parameters. Host only needs to + * acknowledge. + */ + CMD_THERMAL_HOST_TRIP_REACHED = 100, + + /** @brief: number of supported bpmp-to-host commands. May + * increase in future + */ + CMD_THERMAL_BPMP_TO_HOST_NUM +}; + +/* + * Host->BPMP request data for request type CMD_THERMAL_QUERY_ABI + * + * zone: Request type for which to check existence. + */ +struct cmd_thermal_query_abi_request { + uint32_t type; +} __ABI_PACKED; + +/* + * Host->BPMP request data for request type CMD_THERMAL_GET_TEMP + * + * zone: Number of thermal zone. + */ +struct cmd_thermal_get_temp_request { + uint32_t zone; +} __ABI_PACKED; + +/* + * BPMP->Host reply data for request CMD_THERMAL_GET_TEMP + * + * error: 0 if request succeeded. + * -BPMP_EINVAL if request parameters were invalid. + * -BPMP_ENOENT if no driver was registered for the specified thermal zone. + * -BPMP_EFAULT for other thermal zone driver errors. + * temp: Current temperature in millicelsius. + */ +struct cmd_thermal_get_temp_response { + int32_t temp; +} __ABI_PACKED; + +/* + * Host->BPMP request data for request type CMD_THERMAL_SET_TRIP + * + * zone: Number of thermal zone. + * low: Temperature of lower trip point in millicelsius + * high: Temperature of upper trip point in millicelsius + * enabled: 1 to enable trip point, 0 to disable trip point + */ +struct cmd_thermal_set_trip_request { + uint32_t zone; + int32_t low; + int32_t high; + uint32_t enabled; +} __ABI_PACKED; + +/* + * BPMP->Host request data for request type CMD_THERMAL_HOST_TRIP_REACHED + * + * zone: Number of thermal zone where trip point was reached. + */ +struct cmd_thermal_host_trip_reached_request { + uint32_t zone; +} __ABI_PACKED; + +/* + * BPMP->Host reply data for request type CMD_THERMAL_GET_NUM_ZONES + * + * num: Number of supported thermal zones. The thermal zones are indexed + * starting from zero. + */ +struct cmd_thermal_get_num_zones_response { + uint32_t num; +} __ABI_PACKED; + +/* + * Host->BPMP request data. + * + * Reply type is union mrq_thermal_bpmp_to_host_response. + * + * type: Type of request. Values listed in enum mrq_thermal_type. + * data: Request type specific parameters. + */ +struct mrq_thermal_host_to_bpmp_request { + uint32_t type; + union { + struct cmd_thermal_query_abi_request query_abi; + struct cmd_thermal_get_temp_request get_temp; + struct cmd_thermal_set_trip_request set_trip; + } __UNION_ANON; +} __ABI_PACKED; + +/* + * BPMP->Host request data. + * + * type: Type of request. Values listed in enum mrq_thermal_type. + * data: Request type specific parameters. + */ +struct mrq_thermal_bpmp_to_host_request { + uint32_t type; + union { + struct cmd_thermal_host_trip_reached_request host_trip_reached; + } __UNION_ANON; +} __ABI_PACKED; + +/* + * Data in reply to a Host->BPMP request. + */ +union mrq_thermal_bpmp_to_host_response { + struct cmd_thermal_get_temp_response get_temp; + struct cmd_thermal_get_num_zones_response get_num_zones; +} __ABI_PACKED; +/** @} */ + +/** + * @ingroup MRQ_Codes + * @def MRQ_CPU_VHINT + * @brief Query CPU voltage hint data + * + * * Platforms: T186 + * * Initiators: CCPLEX + * * Targets: BPMP + * * Request Payload: @ref mrq_cpu_vhint_request + * * Response Payload: N/A + * + * @addtogroup Vhint CPU Voltage hint + * @{ + */ + +/** + * @brief request with #MRQ_CPU_VHINT + * + * Used by #MRQ_CPU_VHINT call by CCPLEX to retrieve voltage hint data + * from BPMP to memory space pointed by #addr. CCPLEX is responsible + * to allocate sizeof(cpu_vhint_data) sized block of memory and + * appropriately map it for BPMP before sending the request. + */ +struct mrq_cpu_vhint_request { + /** @brief IOVA address for the #cpu_vhint_data */ + uint32_t addr; /* struct cpu_vhint_data * */ + /** @brief ID of the cluster whose data is requested */ + uint32_t cluster_id; /* enum cluster_id */ +} __ABI_PACKED; + +/** + * @brief description of the CPU v/f relation + * + * Used by #MRQ_CPU_VHINT call to carry data pointed by #addr of + * struct mrq_cpu_vhint_request + */ +struct cpu_vhint_data { + uint32_t ref_clk_hz; /**< reference frequency in Hz */ + uint16_t pdiv; /**< post divider value */ + uint16_t mdiv; /**< input divider value */ + uint16_t ndiv_max; /**< fMAX expressed with max NDIV value */ + /** table of ndiv values as a function of vINDEX (voltage index) */ + uint16_t ndiv[80]; + /** minimum allowed NDIV value */ + uint16_t ndiv_min; + /** minimum allowed voltage hint value (as in vINDEX) */ + uint16_t vfloor; + /** maximum allowed voltage hint value (as in vINDEX) */ + uint16_t vceil; + /** post-multiplier for vindex value */ + uint16_t vindex_mult; + /** post-divider for vindex value */ + uint16_t vindex_div; + /** reserved for future use */ + uint16_t reserved[328]; +} __ABI_PACKED; + +/** @} */ + +/** + * @ingroup MRQ_Codes + * @def MRQ_ABI_RATCHET + * @brief ABI ratchet value query + * + * * Platforms: T186 + * * Initiators: Any + * * Targets: BPMP + * * Request Payload: @ref mrq_abi_ratchet_request + * * Response Payload: @ref mrq_abi_ratchet_response + * @addtogroup ABI_info + * @{ + */ + +/** + * @brief an ABI compatibility mechanism + * + * BPMP_ABI_RATCHET_VALUE may increase for various reasons in a future + * revision of this header file. + * 1. That future revision deprecates some MRQ + * 2. That future revision introduces a breaking change to an existing + * MRQ or + * 3. A bug is discovered in an existing implementation of the BPMP-FW + * (or possibly one of its clients) which warrants deprecating that + * implementation. + */ +#define BPMP_ABI_RATCHET_VALUE 3 + +/** + * @brief request with #MRQ_ABI_RATCHET. + * + * #ratchet should be #BPMP_ABI_RATCHET_VALUE from the ABI header + * against which the requester was compiled. + * + * If ratchet is less than BPMP's #BPMP_ABI_RATCHET_VALUE, BPMP may + * reply with mrq_response::err = -#BPMP_ERANGE to indicate that + * BPMP-FW cannot interoperate correctly with the requester. Requester + * should cease further communication with BPMP. + * + * Otherwise, err shall be 0. + */ +struct mrq_abi_ratchet_request { + /** @brief requester's ratchet value */ + uint16_t ratchet; +}; + +/** + * @brief response to #MRQ_ABI_RATCHET + * + * #ratchet shall be #BPMP_ABI_RATCHET_VALUE from the ABI header + * against which BPMP firwmare was compiled. + * + * If #ratchet is less than the requester's #BPMP_ABI_RATCHET_VALUE, + * the requster must either interoperate with BPMP according to an ABI + * header version with BPMP_ABI_RATCHET_VALUE = ratchet or cease + * communication with BPMP. + * + * If mrq_response::err is 0 and ratchet is greater than or equal to the + * requester's BPMP_ABI_RATCHET_VALUE, the requester should continue + * normal operation. + */ +struct mrq_abi_ratchet_response { + /** @brief BPMP's ratchet value */ + uint16_t ratchet; +}; +/** @} */ + +/** + * @ingroup MRQ_Codes + * @def MRQ_EMC_DVFS_LATENCY + * @brief query frequency dependent EMC DVFS latency + * + * * Platforms: T186 + * * Initiators: CCPLEX + * * Targets: BPMP + * * Request Payload: N/A + * * Response Payload: @ref mrq_emc_dvfs_latency_response + * @addtogroup EMC + * @{ + */ + +/** + * @brief used by @ref mrq_emc_dvfs_latency_response + */ +struct emc_dvfs_latency { + /** @brief EMC frequency in kHz */ + uint32_t freq; + /** @brief EMC DVFS latency in nanoseconds */ + uint32_t latency; +} __ABI_PACKED; + +#define EMC_DVFS_LATENCY_MAX_SIZE 14 +/** + * @brief response to #MRQ_EMC_DVFS_LATENCY + */ +struct mrq_emc_dvfs_latency_response { + /** @brief the number valid entries in #pairs */ + uint32_t num_pairs; + /** @brief EMC <frequency, latency> information */ + struct emc_dvfs_latency pairs[EMC_DVFS_LATENCY_MAX_SIZE]; +} __ABI_PACKED; + +/** @} */ + +/** + * @ingroup MRQ_Codes + * @def MRQ_TRACE_ITER + * @brief manage the trace iterator + * + * * Platforms: All + * * Initiators: CCPLEX + * * Targets: BPMP + * * Request Payload: N/A + * * Response Payload: @ref mrq_trace_iter_request + * @addtogroup Trace + * @{ + */ +enum { + /** @brief (re)start the tracing now. Ignore older events */ + TRACE_ITER_INIT = 0, + /** @brief clobber all events in the trace buffer */ + TRACE_ITER_CLEAN = 1 +}; + +/** + * @brief request with #MRQ_TRACE_ITER + */ +struct mrq_trace_iter_request { + /** @brief TRACE_ITER_INIT or TRACE_ITER_CLEAN */ + uint32_t cmd; +} __ABI_PACKED; + +/** @} */ + +/* + * 4. Enumerations + */ + +/* + * 4.1 CPU enumerations + * + * See <mach-t186/system-t186.h> + * + * 4.2 CPU Cluster enumerations + * + * See <mach-t186/system-t186.h> + * + * 4.3 System low power state enumerations + * + * See <mach-t186/system-t186.h> + */ + +/* + * 4.4 Clock enumerations + * + * For clock enumerations, see <mach-t186/clk-t186.h> + */ + +/* + * 4.5 Reset enumerations + * + * For reset enumerations, see <mach-t186/reset-t186.h> + */ + +/* + * 4.6 Thermal sensor enumerations + * + * For thermal sensor enumerations, see <mach-t186/thermal-t186.h> + */ + +/** + * @defgroup Error_Codes + * Negative values for mrq_response::err generally indicate some + * error. The ABI defines the following error codes. Negating these + * defines is an exercise left to the user. + * @{ + */ +/** @brief No such file or directory */ +#define BPMP_ENOENT 2 +/** @brief No MRQ handler */ +#define BPMP_ENOHANDLER 3 +/** @brief I/O error */ +#define BPMP_EIO 5 +/** @brief Bad sub-MRQ command */ +#define BPMP_EBADCMD 6 +/** @brief Not enough memory */ +#define BPMP_ENOMEM 12 +/** @brief Permission denied */ +#define BPMP_EACCES 13 +/** @brief Bad address */ +#define BPMP_EFAULT 14 +/** @brief No such device */ +#define BPMP_ENODEV 19 +/** @brief Argument is a directory */ +#define BPMP_EISDIR 21 +/** @brief Invalid argument */ +#define BPMP_EINVAL 22 +/** @brief Timeout during operation */ +#define BPMP_ETIMEDOUT 23 +/** @brief Out of range */ +#define BPMP_ERANGE 34 +/** @} */ +/** @} */ +#endif diff --git a/include/soc/tegra/bpmp.h b/include/soc/tegra/bpmp.h new file mode 100644 index 000000000000..13dcd44e91bb --- /dev/null +++ b/include/soc/tegra/bpmp.h @@ -0,0 +1,141 @@ +/* + * Copyright (c) 2016, NVIDIA CORPORATION. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#ifndef __SOC_TEGRA_BPMP_H +#define __SOC_TEGRA_BPMP_H + +#include <linux/mailbox_client.h> +#include <linux/reset-controller.h> +#include <linux/semaphore.h> +#include <linux/types.h> + +#include <soc/tegra/bpmp-abi.h> + +struct tegra_bpmp_clk; + +struct tegra_bpmp_soc { + struct { + struct { + unsigned int offset; + unsigned int count; + unsigned int timeout; + } cpu_tx, thread, cpu_rx; + } channels; + unsigned int num_resets; +}; + +struct tegra_bpmp_mb_data { + u32 code; + u32 flags; + u8 data[MSG_DATA_MIN_SZ]; +} __packed; + +struct tegra_bpmp_channel { + struct tegra_bpmp *bpmp; + struct tegra_bpmp_mb_data *ib; + struct tegra_bpmp_mb_data *ob; + struct completion completion; + struct tegra_ivc *ivc; +}; + +typedef void (*tegra_bpmp_mrq_handler_t)(unsigned int mrq, + struct tegra_bpmp_channel *channel, + void *data); + +struct tegra_bpmp_mrq { + struct list_head list; + unsigned int mrq; + tegra_bpmp_mrq_handler_t handler; + void *data; +}; + +struct tegra_bpmp { + const struct tegra_bpmp_soc *soc; + struct device *dev; + + struct { + struct gen_pool *pool; + dma_addr_t phys; + void *virt; + } tx, rx; + + struct { + struct mbox_client client; + struct mbox_chan *channel; + } mbox; + + struct tegra_bpmp_channel *channels; + unsigned int num_channels; + + struct { + unsigned long *allocated; + unsigned long *busy; + unsigned int count; + struct semaphore lock; + } threaded; + + struct list_head mrqs; + spinlock_t lock; + + struct tegra_bpmp_clk **clocks; + unsigned int num_clocks; + + struct reset_controller_dev rstc; +}; + +struct tegra_bpmp *tegra_bpmp_get(struct device *dev); +void tegra_bpmp_put(struct tegra_bpmp *bpmp); + +struct tegra_bpmp_message { + unsigned int mrq; + + struct { + const void *data; + size_t size; + } tx; + + struct { + void *data; + size_t size; + } rx; +}; + +int tegra_bpmp_transfer_atomic(struct tegra_bpmp *bpmp, + struct tegra_bpmp_message *msg); +int tegra_bpmp_transfer(struct tegra_bpmp *bpmp, + struct tegra_bpmp_message *msg); + +int tegra_bpmp_request_mrq(struct tegra_bpmp *bpmp, unsigned int mrq, + tegra_bpmp_mrq_handler_t handler, void *data); +void tegra_bpmp_free_mrq(struct tegra_bpmp *bpmp, unsigned int mrq, + void *data); + +#if IS_ENABLED(CONFIG_CLK_TEGRA_BPMP) +int tegra_bpmp_init_clocks(struct tegra_bpmp *bpmp); +#else +static inline int tegra_bpmp_init_clocks(struct tegra_bpmp *bpmp) +{ + return 0; +} +#endif + +#if IS_ENABLED(CONFIG_RESET_TEGRA_BPMP) +int tegra_bpmp_init_resets(struct tegra_bpmp *bpmp); +#else +static inline int tegra_bpmp_init_resets(struct tegra_bpmp *bpmp) +{ + return 0; +} +#endif + +#endif /* __SOC_TEGRA_BPMP_H */ diff --git a/include/soc/tegra/ivc.h b/include/soc/tegra/ivc.h new file mode 100644 index 000000000000..b13cc43ad9d8 --- /dev/null +++ b/include/soc/tegra/ivc.h @@ -0,0 +1,109 @@ +/* + * Copyright (c) 2016, NVIDIA CORPORATION. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#ifndef __TEGRA_IVC_H + +#include <linux/device.h> +#include <linux/dma-mapping.h> +#include <linux/types.h> + +struct tegra_ivc_header; + +struct tegra_ivc { + struct device *peer; + + struct { + struct tegra_ivc_header *channel; + unsigned int position; + dma_addr_t phys; + } rx, tx; + + void (*notify)(struct tegra_ivc *ivc, void *data); + void *notify_data; + + unsigned int num_frames; + size_t frame_size; +}; + +/** + * tegra_ivc_read_get_next_frame - Peek at the next frame to receive + * @ivc pointer of the IVC channel + * + * Peek at the next frame to be received, without removing it from + * the queue. + * + * Returns a pointer to the frame, or an error encoded pointer. + */ +void *tegra_ivc_read_get_next_frame(struct tegra_ivc *ivc); + +/** + * tegra_ivc_read_advance - Advance the read queue + * @ivc pointer of the IVC channel + * + * Advance the read queue + * + * Returns 0, or a negative error value if failed. + */ +int tegra_ivc_read_advance(struct tegra_ivc *ivc); + +/** + * tegra_ivc_write_get_next_frame - Poke at the next frame to transmit + * @ivc pointer of the IVC channel + * + * Get access to the next frame. + * + * Returns a pointer to the frame, or an error encoded pointer. + */ +void *tegra_ivc_write_get_next_frame(struct tegra_ivc *ivc); + +/** + * tegra_ivc_write_advance - Advance the write queue + * @ivc pointer of the IVC channel + * + * Advance the write queue + * + * Returns 0, or a negative error value if failed. + */ +int tegra_ivc_write_advance(struct tegra_ivc *ivc); + +/** + * tegra_ivc_notified - handle internal messages + * @ivc pointer of the IVC channel + * + * This function must be called following every notification. + * + * Returns 0 if the channel is ready for communication, or -EAGAIN if a channel + * reset is in progress. + */ +int tegra_ivc_notified(struct tegra_ivc *ivc); + +/** + * tegra_ivc_reset - initiates a reset of the shared memory state + * @ivc pointer of the IVC channel + * + * This function must be called after a channel is reserved before it is used + * for communication. The channel will be ready for use when a subsequent call + * to notify the remote of the channel reset. + */ +void tegra_ivc_reset(struct tegra_ivc *ivc); + +size_t tegra_ivc_align(size_t size); +unsigned tegra_ivc_total_queue_size(unsigned queue_size); +int tegra_ivc_init(struct tegra_ivc *ivc, struct device *peer, void *rx, + dma_addr_t rx_phys, void *tx, dma_addr_t tx_phys, + unsigned int num_frames, size_t frame_size, + void (*notify)(struct tegra_ivc *ivc, void *data), + void *data); +void tegra_ivc_cleanup(struct tegra_ivc *ivc); + +#endif /* __TEGRA_IVC_H */ diff --git a/include/soc/tegra/pmc.h b/include/soc/tegra/pmc.h index e9e53473a63e..2f271d1b9cea 100644 --- a/include/soc/tegra/pmc.h +++ b/include/soc/tegra/pmc.h @@ -76,37 +76,73 @@ int tegra_pmc_cpu_remove_clamping(unsigned int cpuid); #define TEGRA_POWERGATE_3D0 TEGRA_POWERGATE_3D -#define TEGRA_IO_RAIL_CSIA 0 -#define TEGRA_IO_RAIL_CSIB 1 -#define TEGRA_IO_RAIL_DSI 2 -#define TEGRA_IO_RAIL_MIPI_BIAS 3 -#define TEGRA_IO_RAIL_PEX_BIAS 4 -#define TEGRA_IO_RAIL_PEX_CLK1 5 -#define TEGRA_IO_RAIL_PEX_CLK2 6 -#define TEGRA_IO_RAIL_USB0 9 -#define TEGRA_IO_RAIL_USB1 10 -#define TEGRA_IO_RAIL_USB2 11 -#define TEGRA_IO_RAIL_USB_BIAS 12 -#define TEGRA_IO_RAIL_NAND 13 -#define TEGRA_IO_RAIL_UART 14 -#define TEGRA_IO_RAIL_BB 15 -#define TEGRA_IO_RAIL_AUDIO 17 -#define TEGRA_IO_RAIL_HSIC 19 -#define TEGRA_IO_RAIL_COMP 22 -#define TEGRA_IO_RAIL_HDMI 28 -#define TEGRA_IO_RAIL_PEX_CNTRL 32 -#define TEGRA_IO_RAIL_SDMMC1 33 -#define TEGRA_IO_RAIL_SDMMC3 34 -#define TEGRA_IO_RAIL_SDMMC4 35 -#define TEGRA_IO_RAIL_CAM 36 -#define TEGRA_IO_RAIL_RES 37 -#define TEGRA_IO_RAIL_HV 38 -#define TEGRA_IO_RAIL_DSIB 39 -#define TEGRA_IO_RAIL_DSIC 40 -#define TEGRA_IO_RAIL_DSID 41 -#define TEGRA_IO_RAIL_CSIE 44 -#define TEGRA_IO_RAIL_LVDS 57 -#define TEGRA_IO_RAIL_SYS_DDC 58 +/** + * enum tegra_io_pad - I/O pad group identifier + * + * I/O pins on Tegra SoCs are grouped into so-called I/O pads. Each such pad + * can be used to control the common voltage signal level and power state of + * the pins of the given pad. + */ +enum tegra_io_pad { + TEGRA_IO_PAD_AUDIO, + TEGRA_IO_PAD_AUDIO_HV, + TEGRA_IO_PAD_BB, + TEGRA_IO_PAD_CAM, + TEGRA_IO_PAD_COMP, + TEGRA_IO_PAD_CSIA, + TEGRA_IO_PAD_CSIB, + TEGRA_IO_PAD_CSIC, + TEGRA_IO_PAD_CSID, + TEGRA_IO_PAD_CSIE, + TEGRA_IO_PAD_CSIF, + TEGRA_IO_PAD_DBG, + TEGRA_IO_PAD_DEBUG_NONAO, + TEGRA_IO_PAD_DMIC, + TEGRA_IO_PAD_DP, + TEGRA_IO_PAD_DSI, + TEGRA_IO_PAD_DSIB, + TEGRA_IO_PAD_DSIC, + TEGRA_IO_PAD_DSID, + TEGRA_IO_PAD_EMMC, + TEGRA_IO_PAD_EMMC2, + TEGRA_IO_PAD_GPIO, + TEGRA_IO_PAD_HDMI, + TEGRA_IO_PAD_HSIC, + TEGRA_IO_PAD_HV, + TEGRA_IO_PAD_LVDS, + TEGRA_IO_PAD_MIPI_BIAS, + TEGRA_IO_PAD_NAND, + TEGRA_IO_PAD_PEX_BIAS, + TEGRA_IO_PAD_PEX_CLK1, + TEGRA_IO_PAD_PEX_CLK2, + TEGRA_IO_PAD_PEX_CNTRL, + TEGRA_IO_PAD_SDMMC1, + TEGRA_IO_PAD_SDMMC3, + TEGRA_IO_PAD_SDMMC4, + TEGRA_IO_PAD_SPI, + TEGRA_IO_PAD_SPI_HV, + TEGRA_IO_PAD_SYS_DDC, + TEGRA_IO_PAD_UART, + TEGRA_IO_PAD_USB0, + TEGRA_IO_PAD_USB1, + TEGRA_IO_PAD_USB2, + TEGRA_IO_PAD_USB3, + TEGRA_IO_PAD_USB_BIAS, +}; + +/* deprecated, use TEGRA_IO_PAD_{HDMI,LVDS} instead */ +#define TEGRA_IO_RAIL_HDMI TEGRA_IO_PAD_HDMI +#define TEGRA_IO_RAIL_LVDS TEGRA_IO_PAD_LVDS + +/** + * enum tegra_io_pad_voltage - voltage level of the I/O pad's source rail + * @TEGRA_IO_PAD_1800000UV: 1.8 V + * @TEGRA_IO_PAD_3300000UV: 3.3 V + */ +enum tegra_io_pad_voltage { + TEGRA_IO_PAD_1800000UV, + TEGRA_IO_PAD_3300000UV, +}; #ifdef CONFIG_ARCH_TEGRA int tegra_powergate_is_powered(unsigned int id); @@ -118,6 +154,13 @@ int tegra_powergate_remove_clamping(unsigned int id); int tegra_powergate_sequence_power_up(unsigned int id, struct clk *clk, struct reset_control *rst); +int tegra_io_pad_power_enable(enum tegra_io_pad id); +int tegra_io_pad_power_disable(enum tegra_io_pad id); +int tegra_io_pad_set_voltage(enum tegra_io_pad id, + enum tegra_io_pad_voltage voltage); +int tegra_io_pad_get_voltage(enum tegra_io_pad id); + +/* deprecated, use tegra_io_pad_power_{enable,disable}() instead */ int tegra_io_rail_power_on(unsigned int id); int tegra_io_rail_power_off(unsigned int id); #else @@ -148,6 +191,27 @@ static inline int tegra_powergate_sequence_power_up(unsigned int id, return -ENOSYS; } +static inline int tegra_io_pad_power_enable(enum tegra_io_pad id) +{ + return -ENOSYS; +} + +static inline int tegra_io_pad_power_disable(enum tegra_io_pad id) +{ + return -ENOSYS; +} + +static inline int tegra_io_pad_set_voltage(enum tegra_io_pad id, + enum tegra_io_pad_voltage voltage) +{ + return -ENOSYS; +} + +static inline int tegra_io_pad_get_voltage(enum tegra_io_pad id) +{ + return -ENOSYS; +} + static inline int tegra_io_rail_power_on(unsigned int id) { return -ENOSYS; |