diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/linux/mfd/wm831x/core.h | 247 | ||||
| -rw-r--r-- | include/linux/mfd/wm831x/pdata.h | 107 |
2 files changed, 354 insertions, 0 deletions
diff --git a/include/linux/mfd/wm831x/core.h b/include/linux/mfd/wm831x/core.h new file mode 100644 index 000000000000..d90e693053ba --- /dev/null +++ b/include/linux/mfd/wm831x/core.h @@ -0,0 +1,247 @@ +/* + * include/linux/mfd/wm831x/core.h -- Core interface for WM831x + * + * Copyright 2009 Wolfson Microelectronics PLC. + * + * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifndef __MFD_WM831X_CORE_H__ +#define __MFD_WM831X_CORE_H__ + +/* + * Register values. + */ +#define WM831X_RESET_ID 0x00 +#define WM831X_REVISION 0x01 +#define WM831X_PARENT_ID 0x4000 +#define WM831X_SYSVDD_CONTROL 0x4001 +#define WM831X_THERMAL_MONITORING 0x4002 +#define WM831X_POWER_STATE 0x4003 +#define WM831X_WATCHDOG 0x4004 +#define WM831X_ON_PIN_CONTROL 0x4005 +#define WM831X_RESET_CONTROL 0x4006 +#define WM831X_CONTROL_INTERFACE 0x4007 +#define WM831X_SECURITY_KEY 0x4008 +#define WM831X_SOFTWARE_SCRATCH 0x4009 +#define WM831X_OTP_CONTROL 0x400A +#define WM831X_GPIO_LEVEL 0x400C +#define WM831X_SYSTEM_STATUS 0x400D +#define WM831X_ON_SOURCE 0x400E +#define WM831X_OFF_SOURCE 0x400F +#define WM831X_SYSTEM_INTERRUPTS 0x4010 +#define WM831X_INTERRUPT_STATUS_1 0x4011 +#define WM831X_INTERRUPT_STATUS_2 0x4012 +#define WM831X_INTERRUPT_STATUS_3 0x4013 +#define WM831X_INTERRUPT_STATUS_4 0x4014 +#define WM831X_INTERRUPT_STATUS_5 0x4015 +#define WM831X_IRQ_CONFIG 0x4017 +#define WM831X_SYSTEM_INTERRUPTS_MASK 0x4018 +#define WM831X_INTERRUPT_STATUS_1_MASK 0x4019 +#define WM831X_INTERRUPT_STATUS_2_MASK 0x401A +#define WM831X_INTERRUPT_STATUS_3_MASK 0x401B +#define WM831X_INTERRUPT_STATUS_4_MASK 0x401C +#define WM831X_INTERRUPT_STATUS_5_MASK 0x401D +#define WM831X_RTC_WRITE_COUNTER 0x4020 +#define WM831X_RTC_TIME_1 0x4021 +#define WM831X_RTC_TIME_2 0x4022 +#define WM831X_RTC_ALARM_1 0x4023 +#define WM831X_RTC_ALARM_2 0x4024 +#define WM831X_RTC_CONTROL 0x4025 +#define WM831X_RTC_TRIM 0x4026 +#define WM831X_TOUCH_CONTROL_1 0x4028 +#define WM831X_TOUCH_CONTROL_2 0x4029 +#define WM831X_TOUCH_DATA_X 0x402A +#define WM831X_TOUCH_DATA_Y 0x402B +#define WM831X_TOUCH_DATA_Z 0x402C +#define WM831X_AUXADC_DATA 0x402D +#define WM831X_AUXADC_CONTROL 0x402E +#define WM831X_AUXADC_SOURCE 0x402F +#define WM831X_COMPARATOR_CONTROL 0x4030 +#define WM831X_COMPARATOR_1 0x4031 +#define WM831X_COMPARATOR_2 0x4032 +#define WM831X_COMPARATOR_3 0x4033 +#define WM831X_COMPARATOR_4 0x4034 +#define WM831X_GPIO1_CONTROL 0x4038 +#define WM831X_GPIO2_CONTROL 0x4039 +#define WM831X_GPIO3_CONTROL 0x403A +#define WM831X_GPIO4_CONTROL 0x403B +#define WM831X_GPIO5_CONTROL 0x403C +#define WM831X_GPIO6_CONTROL 0x403D +#define WM831X_GPIO7_CONTROL 0x403E +#define WM831X_GPIO8_CONTROL 0x403F +#define WM831X_GPIO9_CONTROL 0x4040 +#define WM831X_GPIO10_CONTROL 0x4041 +#define WM831X_GPIO11_CONTROL 0x4042 +#define WM831X_GPIO12_CONTROL 0x4043 +#define WM831X_GPIO13_CONTROL 0x4044 +#define WM831X_GPIO14_CONTROL 0x4045 +#define WM831X_GPIO15_CONTROL 0x4046 +#define WM831X_GPIO16_CONTROL 0x4047 +#define WM831X_CHARGER_CONTROL_1 0x4048 +#define WM831X_CHARGER_CONTROL_2 0x4049 +#define WM831X_CHARGER_STATUS 0x404A +#define WM831X_BACKUP_CHARGER_CONTROL 0x404B +#define WM831X_STATUS_LED_1 0x404C +#define WM831X_STATUS_LED_2 0x404D +#define WM831X_CURRENT_SINK_1 0x404E +#define WM831X_CURRENT_SINK_2 0x404F +#define WM831X_DCDC_ENABLE 0x4050 +#define WM831X_LDO_ENABLE 0x4051 +#define WM831X_DCDC_STATUS 0x4052 +#define WM831X_LDO_STATUS 0x4053 +#define WM831X_DCDC_UV_STATUS 0x4054 +#define WM831X_LDO_UV_STATUS 0x4055 +#define WM831X_DC1_CONTROL_1 0x4056 +#define WM831X_DC1_CONTROL_2 0x4057 +#define WM831X_DC1_ON_CONFIG 0x4058 +#define WM831X_DC1_SLEEP_CONTROL 0x4059 +#define WM831X_DC1_DVS_CONTROL 0x405A +#define WM831X_DC2_CONTROL_1 0x405B +#define WM831X_DC2_CONTROL_2 0x405C +#define WM831X_DC2_ON_CONFIG 0x405D +#define WM831X_DC2_SLEEP_CONTROL 0x405E +#define WM831X_DC2_DVS_CONTROL 0x405F +#define WM831X_DC3_CONTROL_1 0x4060 +#define WM831X_DC3_CONTROL_2 0x4061 +#define WM831X_DC3_ON_CONFIG 0x4062 +#define WM831X_DC3_SLEEP_CONTROL 0x4063 +#define WM831X_DC4_CONTROL 0x4064 +#define WM831X_DC4_SLEEP_CONTROL 0x4065 +#define WM831X_EPE1_CONTROL 0x4066 +#define WM831X_EPE2_CONTROL 0x4067 +#define WM831X_LDO1_CONTROL 0x4068 +#define WM831X_LDO1_ON_CONTROL 0x4069 +#define WM831X_LDO1_SLEEP_CONTROL 0x406A +#define WM831X_LDO2_CONTROL 0x406B +#define WM831X_LDO2_ON_CONTROL 0x406C +#define WM831X_LDO2_SLEEP_CONTROL 0x406D +#define WM831X_LDO3_CONTROL 0x406E +#define WM831X_LDO3_ON_CONTROL 0x406F +#define WM831X_LDO3_SLEEP_CONTROL 0x4070 +#define WM831X_LDO4_CONTROL 0x4071 +#define WM831X_LDO4_ON_CONTROL 0x4072 +#define WM831X_LDO4_SLEEP_CONTROL 0x4073 +#define WM831X_LDO5_CONTROL 0x4074 +#define WM831X_LDO5_ON_CONTROL 0x4075 +#define WM831X_LDO5_SLEEP_CONTROL 0x4076 +#define WM831X_LDO6_CONTROL 0x4077 +#define WM831X_LDO6_ON_CONTROL 0x4078 +#define WM831X_LDO6_SLEEP_CONTROL 0x4079 +#define WM831X_LDO7_CONTROL 0x407A +#define WM831X_LDO7_ON_CONTROL 0x407B +#define WM831X_LDO7_SLEEP_CONTROL 0x407C +#define WM831X_LDO8_CONTROL 0x407D +#define WM831X_LDO8_ON_CONTROL 0x407E +#define WM831X_LDO8_SLEEP_CONTROL 0x407F +#define WM831X_LDO9_CONTROL 0x4080 +#define WM831X_LDO9_ON_CONTROL 0x4081 +#define WM831X_LDO9_SLEEP_CONTROL 0x4082 +#define WM831X_LDO10_CONTROL 0x4083 +#define WM831X_LDO10_ON_CONTROL 0x4084 +#define WM831X_LDO10_SLEEP_CONTROL 0x4085 +#define WM831X_LDO11_ON_CONTROL 0x4087 +#define WM831X_LDO11_SLEEP_CONTROL 0x4088 +#define WM831X_POWER_GOOD_SOURCE_1 0x408E +#define WM831X_POWER_GOOD_SOURCE_2 0x408F +#define WM831X_CLOCK_CONTROL_1 0x4090 +#define WM831X_CLOCK_CONTROL_2 0x4091 +#define WM831X_FLL_CONTROL_1 0x4092 +#define WM831X_FLL_CONTROL_2 0x4093 +#define WM831X_FLL_CONTROL_3 0x4094 +#define WM831X_FLL_CONTROL_4 0x4095 +#define WM831X_FLL_CONTROL_5 0x4096 +#define WM831X_UNIQUE_ID_1 0x7800 +#define WM831X_UNIQUE_ID_2 0x7801 +#define WM831X_UNIQUE_ID_3 0x7802 +#define WM831X_UNIQUE_ID_4 0x7803 +#define WM831X_UNIQUE_ID_5 0x7804 +#define WM831X_UNIQUE_ID_6 0x7805 +#define WM831X_UNIQUE_ID_7 0x7806 +#define WM831X_UNIQUE_ID_8 0x7807 +#define WM831X_FACTORY_OTP_ID 0x7808 +#define WM831X_FACTORY_OTP_1 0x7809 +#define WM831X_FACTORY_OTP_2 0x780A +#define WM831X_FACTORY_OTP_3 0x780B +#define WM831X_FACTORY_OTP_4 0x780C +#define WM831X_FACTORY_OTP_5 0x780D +#define WM831X_CUSTOMER_OTP_ID 0x7810 +#define WM831X_DC1_OTP_CONTROL 0x7811 +#define WM831X_DC2_OTP_CONTROL 0x7812 +#define WM831X_DC3_OTP_CONTROL 0x7813 +#define WM831X_LDO1_2_OTP_CONTROL 0x7814 +#define WM831X_LDO3_4_OTP_CONTROL 0x7815 +#define WM831X_LDO5_6_OTP_CONTROL 0x7816 +#define WM831X_LDO7_8_OTP_CONTROL 0x7817 +#define WM831X_LDO9_10_OTP_CONTROL 0x7818 +#define WM831X_LDO11_EPE_CONTROL 0x7819 +#define WM831X_GPIO1_OTP_CONTROL 0x781A +#define WM831X_GPIO2_OTP_CONTROL 0x781B +#define WM831X_GPIO3_OTP_CONTROL 0x781C +#define WM831X_GPIO4_OTP_CONTROL 0x781D +#define WM831X_GPIO5_OTP_CONTROL 0x781E +#define WM831X_GPIO6_OTP_CONTROL 0x781F +#define WM831X_DBE_CHECK_DATA 0x7827 + +/* + * R0 (0x00) - Reset ID + */ +#define WM831X_CHIP_ID_MASK 0xFFFF /* CHIP_ID - [15:0] */ +#define WM831X_CHIP_ID_SHIFT 0 /* CHIP_ID - [15:0] */ +#define WM831X_CHIP_ID_WIDTH 16 /* CHIP_ID - [15:0] */ + +/* + * R1 (0x01) - Revision + */ +#define WM831X_PARENT_REV_MASK 0xFF00 /* PARENT_REV - [15:8] */ +#define WM831X_PARENT_REV_SHIFT 8 /* PARENT_REV - [15:8] */ +#define WM831X_PARENT_REV_WIDTH 8 /* PARENT_REV - [15:8] */ +#define WM831X_CHILD_REV_MASK 0x00FF /* CHILD_REV - [7:0] */ +#define WM831X_CHILD_REV_SHIFT 0 /* CHILD_REV - [7:0] */ +#define WM831X_CHILD_REV_WIDTH 8 /* CHILD_REV - [7:0] */ + +/* + * R16384 (0x4000) - Parent ID + */ +#define WM831X_PARENT_ID_MASK 0xFFFF /* PARENT_ID - [15:0] */ +#define WM831X_PARENT_ID_SHIFT 0 /* PARENT_ID - [15:0] */ +#define WM831X_PARENT_ID_WIDTH 16 /* PARENT_ID - [15:0] */ + +struct wm831x { + struct mutex io_lock; + + struct device *dev; + int (*read_dev)(struct wm831x *wm831x, unsigned short reg, + int bytes, void *dest); + int (*write_dev)(struct wm831x *wm831x, unsigned short reg, + int bytes, void *src); + + void *control_data; + + /* The WM831x has a security key blocking access to certain + * registers. The mutex is taken by the accessors for locking + * and unlocking the security key, locked is used to fail + * writes if the lock is held. + */ + struct mutex key_lock; + unsigned int locked:1; +}; + +/* Device I/O API */ +int wm831x_reg_read(struct wm831x *wm831x, unsigned short reg); +int wm831x_reg_write(struct wm831x *wm831x, unsigned short reg, + unsigned short val); +void wm831x_reg_lock(struct wm831x *wm831x); +int wm831x_reg_unlock(struct wm831x *wm831x); +int wm831x_set_bits(struct wm831x *wm831x, unsigned short reg, + unsigned short mask, unsigned short val); +int wm831x_bulk_read(struct wm831x *wm831x, unsigned short reg, + int count, u16 *buf); + +#endif diff --git a/include/linux/mfd/wm831x/pdata.h b/include/linux/mfd/wm831x/pdata.h new file mode 100644 index 000000000000..571e60136264 --- /dev/null +++ b/include/linux/mfd/wm831x/pdata.h @@ -0,0 +1,107 @@ +/* + * include/linux/mfd/wm831x/pdata.h -- Platform data for WM831x + * + * Copyright 2009 Wolfson Microelectronics PLC. + * + * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifndef __MFD_WM831X_PDATA_H__ +#define __MFD_WM831X_PDATA_H__ + +struct wm831x; +struct regulator_init_data; + +struct wm831x_backup_pdata { + int charger_enable; + int no_constant_voltage; /** Disable constant voltage charging */ + int vlim; /** Voltage limit in milivolts */ + int ilim; /** Current limit in microamps */ +}; + +struct wm831x_battery_pdata { + int enable; /** Enable charging */ + int fast_enable; /** Enable fast charging */ + int off_mask; /** Mask OFF while charging */ + int trickle_ilim; /** Trickle charge current limit, in mA */ + int vsel; /** Target voltage, in mV */ + int eoc_iterm; /** End of trickle charge current, in mA */ + int fast_ilim; /** Fast charge current limit, in mA */ + int timeout; /** Charge cycle timeout, in minutes */ +}; + +/* Sources for status LED configuration. Values are register values + * plus 1 to allow for a zero default for preserve. + */ +enum wm831x_status_src { + WM831X_STATUS_PRESERVE = 0, /* Keep the current hardware setting */ + WM831X_STATUS_OTP = 1, + WM831X_STATUS_POWER = 2, + WM831X_STATUS_CHARGER = 3, + WM831X_STATUS_MANUAL = 4, +}; + +struct wm831x_status_pdata { + enum wm831x_status_src default_src; + const char *name; + const char *default_trigger; +}; + +struct wm831x_touch_pdata { + int fivewire; /** 1 for five wire mode, 0 for 4 wire */ + int isel; /** Current for pen down (uA) */ + int rpu; /** Pen down sensitivity resistor divider */ + int pressure; /** Report pressure (boolean) */ + int data_irq; /** Touch data ready IRQ */ +}; + +enum wm831x_watchdog_action { + WM831X_WDOG_NONE = 0, + WM831X_WDOG_INTERRUPT = 1, + WM831X_WDOG_RESET = 2, + WM831X_WDOG_WAKE = 3, +}; + +struct wm831x_watchdog_pdata { + enum wm831x_watchdog_action primary, secondary; + int update_gpio; + unsigned int software:1; +}; + +#define WM831X_MAX_STATUS 2 +#define WM831X_MAX_DCDC 4 +#define WM831X_MAX_EPE 2 +#define WM831X_MAX_LDO 11 +#define WM831X_MAX_ISINK 2 + +struct wm831x_pdata { + /** Called before subdevices are set up */ + int (*pre_init)(struct wm831x *wm831x); + /** Called after subdevices are set up */ + int (*post_init)(struct wm831x *wm831x); + + int gpio_base; + struct wm831x_backup_pdata *backup; + struct wm831x_battery_pdata *battery; + struct wm831x_touch_pdata *touch; + struct wm831x_watchdog_pdata *watchdog; + + /** LED1 = 0 and so on */ + struct wm831x_status_pdata *status[WM831X_MAX_STATUS]; + /** DCDC1 = 0 and so on */ + struct regulator_init_data *dcdc[WM831X_MAX_DCDC]; + /** EPE1 = 0 and so on */ + struct regulator_init_data *epe[WM831X_MAX_EPE]; + /** LDO1 = 0 and so on */ + struct regulator_init_data *ldo[WM831X_MAX_LDO]; + /** ISINK1 = 0 and so on*/ + struct regulator_init_data *isink[WM831X_MAX_ISINK]; +}; + +#endif |