diff options
Diffstat (limited to 'sound/soc/codecs/wm_hubs.c')
| -rw-r--r-- | sound/soc/codecs/wm_hubs.c | 48 |
1 files changed, 38 insertions, 10 deletions
diff --git a/sound/soc/codecs/wm_hubs.c b/sound/soc/codecs/wm_hubs.c index e763c54c55dc..ca8ce03510f4 100644 --- a/sound/soc/codecs/wm_hubs.c +++ b/sound/soc/codecs/wm_hubs.c @@ -18,6 +18,7 @@ #include <linux/pm.h> #include <linux/i2c.h> #include <linux/platform_device.h> +#include <linux/mfd/wm8994/registers.h> #include <sound/core.h> #include <sound/pcm.h> #include <sound/pcm_params.h> @@ -116,14 +117,23 @@ static void calibrate_dc_servo(struct snd_soc_codec *codec) { struct wm_hubs_data *hubs = snd_soc_codec_get_drvdata(codec); s8 offset; - u16 reg, reg_l, reg_r, dcs_cfg; + u16 reg, reg_l, reg_r, dcs_cfg, dcs_reg; + + switch (hubs->dcs_readback_mode) { + case 2: + dcs_reg = WM8994_DC_SERVO_4E; + break; + default: + dcs_reg = WM8993_DC_SERVO_3; + break; + } /* If we're using a digital only path and have a previously * callibrated DC servo offset stored then use that. */ if (hubs->class_w && hubs->class_w_dcs) { dev_dbg(codec->dev, "Using cached DC servo offset %x\n", hubs->class_w_dcs); - snd_soc_write(codec, WM8993_DC_SERVO_3, hubs->class_w_dcs); + snd_soc_write(codec, dcs_reg, hubs->class_w_dcs); wait_for_dc_servo(codec, WM8993_DCS_TRIG_DAC_WR_0 | WM8993_DCS_TRIG_DAC_WR_1); @@ -154,8 +164,9 @@ static void calibrate_dc_servo(struct snd_soc_codec *codec) reg_r = snd_soc_read(codec, WM8993_DC_SERVO_READBACK_2) & WM8993_DCS_INTEG_CHAN_1_MASK; break; + case 2: case 1: - reg = snd_soc_read(codec, WM8993_DC_SERVO_3); + reg = snd_soc_read(codec, dcs_reg); reg_r = (reg & WM8993_DCS_DAC_WR_VAL_1_MASK) >> WM8993_DCS_DAC_WR_VAL_1_SHIFT; reg_l = reg & WM8993_DCS_DAC_WR_VAL_0_MASK; @@ -168,24 +179,25 @@ static void calibrate_dc_servo(struct snd_soc_codec *codec) dev_dbg(codec->dev, "DCS input: %x %x\n", reg_l, reg_r); /* Apply correction to DC servo result */ - if (hubs->dcs_codes) { - dev_dbg(codec->dev, "Applying %d code DC servo correction\n", - hubs->dcs_codes); + if (hubs->dcs_codes_l || hubs->dcs_codes_r) { + dev_dbg(codec->dev, + "Applying %d/%d code DC servo correction\n", + hubs->dcs_codes_l, hubs->dcs_codes_r); /* HPOUT1R */ offset = reg_r; - offset += hubs->dcs_codes; + offset += hubs->dcs_codes_r; dcs_cfg = (u8)offset << WM8993_DCS_DAC_WR_VAL_1_SHIFT; /* HPOUT1L */ offset = reg_l; - offset += hubs->dcs_codes; + offset += hubs->dcs_codes_l; dcs_cfg |= (u8)offset; dev_dbg(codec->dev, "DCS result: %x\n", dcs_cfg); /* Do it */ - snd_soc_write(codec, WM8993_DC_SERVO_3, dcs_cfg); + snd_soc_write(codec, dcs_reg, dcs_cfg); wait_for_dc_servo(codec, WM8993_DCS_TRIG_DAC_WR_0 | WM8993_DCS_TRIG_DAC_WR_1); @@ -217,7 +229,7 @@ static int wm8993_put_dc_servo(struct snd_kcontrol *kcontrol, /* If we're applying an offset correction then updating the * callibration would be likely to introduce further offsets. */ - if (hubs->dcs_codes || hubs->no_series_update) + if (hubs->dcs_codes_l || hubs->dcs_codes_r || hubs->no_series_update) return ret; /* Only need to do this if the outputs are active */ @@ -699,6 +711,11 @@ static const struct snd_soc_dapm_route analogue_routes[] = { { "IN1L PGA", "IN1LP Switch", "IN1LP" }, { "IN1L PGA", "IN1LN Switch", "IN1LN" }, + { "IN1L PGA", NULL, "VMID" }, + { "IN1R PGA", NULL, "VMID" }, + { "IN2L PGA", NULL, "VMID" }, + { "IN2R PGA", NULL, "VMID" }, + { "IN1R PGA", "IN1RP Switch", "IN1RP" }, { "IN1R PGA", "IN1RN Switch", "IN1RN" }, @@ -716,12 +733,14 @@ static const struct snd_soc_dapm_route analogue_routes[] = { { "MIXINL", NULL, "Direct Voice" }, { "MIXINL", NULL, "IN1LP" }, { "MIXINL", NULL, "Left Output Mixer" }, + { "MIXINL", NULL, "VMID" }, { "MIXINR", "IN1R Switch", "IN1R PGA" }, { "MIXINR", "IN2R Switch", "IN2R PGA" }, { "MIXINR", NULL, "Direct Voice" }, { "MIXINR", NULL, "IN1RP" }, { "MIXINR", NULL, "Right Output Mixer" }, + { "MIXINR", NULL, "VMID" }, { "ADCL", NULL, "MIXINL" }, { "ADCR", NULL, "MIXINR" }, @@ -752,6 +771,7 @@ static const struct snd_soc_dapm_route analogue_routes[] = { { "Earpiece Mixer", "Left Output Switch", "Left Output PGA" }, { "Earpiece Mixer", "Right Output Switch", "Right Output PGA" }, + { "Earpiece Driver", NULL, "VMID" }, { "Earpiece Driver", NULL, "Earpiece Mixer" }, { "HPOUT2N", NULL, "Earpiece Driver" }, { "HPOUT2P", NULL, "Earpiece Driver" }, @@ -774,9 +794,11 @@ static const struct snd_soc_dapm_route analogue_routes[] = { { "SPKR Boost", "SPKR Switch", "SPKR" }, { "SPKR Boost", "SPKL Switch", "SPKL" }, + { "SPKL Driver", NULL, "VMID" }, { "SPKL Driver", NULL, "SPKL Boost" }, { "SPKL Driver", NULL, "CLK_SYS" }, + { "SPKR Driver", NULL, "VMID" }, { "SPKR Driver", NULL, "SPKR Boost" }, { "SPKR Driver", NULL, "CLK_SYS" }, @@ -790,12 +812,18 @@ static const struct snd_soc_dapm_route analogue_routes[] = { { "Headphone PGA", NULL, "Left Headphone Mux" }, { "Headphone PGA", NULL, "Right Headphone Mux" }, + { "Headphone PGA", NULL, "VMID" }, { "Headphone PGA", NULL, "CLK_SYS" }, { "Headphone PGA", NULL, "Headphone Supply" }, { "HPOUT1L", NULL, "Headphone PGA" }, { "HPOUT1R", NULL, "Headphone PGA" }, + { "LINEOUT1N Driver", NULL, "VMID" }, + { "LINEOUT1P Driver", NULL, "VMID" }, + { "LINEOUT2N Driver", NULL, "VMID" }, + { "LINEOUT2P Driver", NULL, "VMID" }, + { "LINEOUT1N", NULL, "LINEOUT1N Driver" }, { "LINEOUT1P", NULL, "LINEOUT1P Driver" }, { "LINEOUT2N", NULL, "LINEOUT2N Driver" }, |