summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2007-07-05[ARM] always allow dump_stack() to produce a backtraceRussell King
Don't make this dependent on CONFIG_DEBUG_KERNEL - if we hit a WARN_ON we need the stack trace to work out how we got to that point. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-04[ARM] Fix non-page aligned boot time mappingsRussell King
AT91SAM9260 stopped booting with the recent changes to MM initialisation - it was asking for a non-aligned virtual address which caused loops to be non-terminal. Fix this by rounding virtual addresses down, but remember to include the offset in the length, and round the length up to the following page. This means that asking for a mapping of 4K starting at 2K into a page maps two pages as one would expect. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-02[ARM] 4458/1: pxa: Fix CKEN usage and hence fix pxa suspend/resumeRichard Purdie
The PXA CKEN changes broken syspend/resume on the pxa27x. This patch corrects the problem and fixes another couple of bad references. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-02[ARM] 4454/1: Use word accesses in Versatile PCI config readsAndrzej Zaborowski
ARM Versatile PCI config reads of one byte width have the lowest two bits of the address cleared and result in reading from a wrong place in the config space. This change is to use word size accesses like it is done for halfword reads. Byte reads are used for retrieving the IRQ number of a PCI device and the problem was not exposed until 2.6.20 because the value read was discarded in drivers/pci/setup-irq.c (recently fixed). Signed-off-by: Andrzej Zaborowski <andrew@openedhand.com> Acked-by: Paul Brook <paul@codesourcery.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-01Linux 2.6.22-rc7Linus Torvalds
Last -rc? That's the plan..
2007-07-01PM: introduce set_target method in pm_opsRafael J. Wysocki
Commit 52ade9b3b97fd3bea42842a056fe0786c28d0555 changed the suspend code ordering to execute pm_ops->prepare() after the device model per-device .suspend() calls in order to fix some ACPI-related issues. Unfortunately, it broke the at91 platform which assumed that pm_ops->prepare() would be called before suspending devices. at91 used pm_ops->prepare() to get notified of the target system sleep state, so that it could use this information while suspending devices. However, with the current suspend code ordering pm_ops->prepare() is called too late for this purpose. Thus, at91 needs an additional method in 'struct pm_ops' that will be used for notifying the platform of the target system sleep state. Moreover, in the future such a method will also be needed by ACPI. This patch adds the .set_target() method to 'struct pm_ops' and makes the suspend code call it, if implemented, before executing the device model per-device .suspend() calls. It also modifies the at91 code to use pm_ops->set_target() instead of pm_ops->prepare(). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Pavel Machek <pavel@ucw.cz> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Len Brown <lenb@kernel.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-01smsc-ircc2: bypass PNP detection until we get the quirks worked outBjorn Helgaas
Don't use PNP detection by default yet. We have some PNP and BIOS issues to work out first. Sample problem on a Toshiba Portege 4000: the SMCf010 device is handed off disabled. We assign I/O ports originally assigned to the SMCf010 to a PCMCIA device instead. We enable the SMCf010, configuring it to use disjoint ports, but _SRS doesn't work correctly, so the device doesn't work. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Andrey Borzenkov <arvidjaar@mail.ru> Cc: Adam Belay <ambx1@neo.rr.com> Cc: Michal Piotrowski <michal.k.k.piotrowski@gmail.com> Cc: Samuel Ortiz <samuel@sortiz.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-01i386: mtrr crash fixAndrew Morton
Commit 3ebad5905609476a4ff1151a66b21d9794009961 ("[PATCH] x86: Save and restore the fixed-range MTRRs of the BSP when suspending") added mtrr operations without verifying that the CPU has MTRRs. Crashes transmeta CPUs. Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <linux@horizon.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-01asus_acpi: fix oops on non-asus machinesMaxime Austruy
If asus_acpi_init doesn't find any device it knows about, it mistakenly returns a "success" error code even though it cleans up after itself. Later when trying to rmmod asus_acpi, the module_exit routine would try to clean up one more time and we would end up calling acpi_bus_unregister_driver(&asus_hotk_driver) twice. This patch addresses this first problem by returning -ENODEV when no appropriate device is found. Then there was also another bug with the code handling the return value of backlight_device_register. If this function ever failed, the driver would cleanup by calling the module_exit routine from module_init, but it would still return "success". So any attempt to rmmod this module would result in asus_acpi_exit being called twice but it's not ready to handle it (I haven't hit this bug, just found it by code inspection). This patch fixes that by inserting a return -ENODEV; at the end of this error handling path. Signed-off-by: Maxime Austruy <maxime@tralhalla.org> Cc: Len Brown <lenb@kernel.org> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Jan Engelhardt <jengelh@computergmbh.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-01pci.h stubs (for EDD build error)Randy Dunlap
Provide stubs for more PCI bus/slot functions when CONFIG_PCI=n. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Matt Domsch <Matt_Domsch@dell.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-01ALSA: more section mismatchesRandy Dunlap
Fix section mismatch warnings: WARNING: sound/built-in.o(.exit.text+0x3ad): Section mismatch: reference to .init.text: (between 'sb_exit' and 'unload_uart6850') WARNING: sound/built-in.o(.exit.text+0x753): Section mismatch: reference to .init.text: (between 'snd_mts64_module_exit' and 'snd_portman_module_exit') Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Jaroslav Kysela <perex@suse.cz> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-01frv: fix fallout from "remove sched.h from mm.h" patchAlexey Dobriyan
/home/rpjday/AMD/k/topics/0_hi/hi1.c:15: error: dereferencing pointer to incomplete type /home/rpjday/AMD/k/topics/0_hi/hi1.c:16: error: dereferencing pointer to incomplete type Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru> Cc: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-01SLAB: remove WARN_ON_ONCE for zero sized objects for 2.6.22 releaseChristoph Lameter
We agreed to remove the WARN_ON_ONCE before 2.6.22 is released. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-01blink driver power savingStephen Hemminger
The blink driver wakes up every jiffies which wastes power unnecessarily. Using a notifier gives same effect. Also add ability to unload module. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> [ We should really just delete the whole thing. The blink driver is broken in many other ways too -Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-01i386: remove bogus mtrr range checkLinus Torvalds
Commit 9215da33209b861b01c51382254b178a3fe92a30 "fixed" the MTRR range check to not allow any MTRR's under the 1MB mark (since that's where the fixed MTRR's are active). However, that was totally bogus, since it's normal (and almost required) to have a large variable MTRR that starts at 0, and covers some large percentage of the whole RAM, and then using the fixed MTRR's to override that large MTRR to handle the special ISA hole in the 640k-1M region. The old check was bogus too (checking that no variable MTRR is used that is entirely under the 1MB range), but at least it wasn't actively detrimental, because no sane situation would ever trigger such MTRR usage in the first place. That said, the whole notion of not allowing variable MTRR's in the low 1MB is just stupid, so rather than revert the commit, this just removes the whole sad and unnecessary check entirely. Cc: Jan Beulich <jbeulich@novell.com> Cc: Andi Kleen <ak@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Tested-by: Luca Palermo <darkmage@sabayonlinux.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-29Merge branch 'master' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6 * 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: Add linux/pagemap.h to asm/tlb.h [SPARC64]: Need to set state to IDLE during sun4v IRQ enable. [SPARC64]: Fix VIRQ enabling. [SPARC64]: Add irqs to mdesc_node.
2007-06-29Merge branch 'master' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 * 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [IRDA]: fix printk format [NETPOLL] netconsole: fix soft lockup when removing module [NETPOLL]: tx lock deadlock fix SCTP: lock_sock_nested in sctp_sock_migrate SCTP: Fix sctp_getsockopt_get_peer_addrs SCTP: update sctp_getsockopt helpers to allow oversized buffers
2007-06-29Fix VDSO gettimeofday() when called with NULL struct timeval.Will Schmidt
The vdso64 portion of patch 74609f4536f2b8fd6a48381bbbe3cd37da20a527 for fixing problems with NULL gettimeofday input mistakenly checks for a null tz field twice, when it should be checking for null tz once, and null tv once; by way of a r10/r11 typo. Any application calling gettimeofday(&tv,NULL) will "fail". This corrects that typo, and makes my G5 happy. Tested on G5. Signed-off-by: Will Schmidt <will_schmidt@vnet.ibm.com> Cc: Tony Breeds <tony@bakeyournoodle.com> Forwarded-by: Ben Herrenschmidt <benh@kernel.crashing.org> [ Ben says: "I checked the 32 bits part of the change is correct. You can probably blame me for originally writing the 2 versions with inversed usage of r10 and r11, thus confusing Tony :-)" Ben duly blamed. - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-28[IRDA]: fix printk formatRandy Dunlap
Fix printk format warning: drivers/net/irda/irport.c:512: warning: format '%d' expects type 'int', but argument 5 has type 'long int' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-28[NETPOLL] netconsole: fix soft lockup when removing moduleJarek Poplawski
#1 Until kernel ver. 2.6.21 (including) cancel_rearming_delayed_work() required a work function should always (unconditionally) rearm with delay > 0 - otherwise it would endlessly loop. This patch replaces this function with cancel_delayed_work(). Later kernel versions don't require this, so here it's only for uniformity. #2 After deleting a timer in cancel_[rearming_]delayed_work() there could stay a last skb queued in npinfo->txq causing a memory leak after kfree(npinfo). Initial patch & testing by: Jason Wessel <jason.wessel@windriver.com> Signed-off-by: Jarek Poplawski <jarkao2@o2.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-28[SPARC64]: Add linux/pagemap.h to asm/tlb.hAlexey Dobriyan
As seen on sparc64-allnoconfig: CC arch/sparc64/mm/tlb.o In file included from arch/sparc64/mm/tlb.c:19: include/asm/tlb.h: In function 'tlb_flush_mmu': include/asm/tlb.h:60: warning: implicit declaration of function 'release_pages' include/asm/tlb.h: In function 'tlb_remove_page': include/asm/tlb.h:92: warning: implicit declaration of function 'page_cache_release' Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-06-28Merge master.kernel.org:/pub/scm/linux/kernel/git/vxy/lksctp-devDavid S. Miller
2007-06-28Merge branch 'for_linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc * 'for_linus' of master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc: phy: Fix phy_id for Vitesse 824x PHY
2007-06-28Introduce fixed sys_sync_file_range2() syscall, implement on PowerPC and ARMDavid Woodhouse
Not all the world is an i386. Many architectures need 64-bit arguments to be aligned in suitable pairs of registers, and the original sys_sync_file_range(int, loff_t, loff_t, int) was therefore wasting an argument register for padding after the first integer. Since we don't normally have more than 6 arguments for system calls, that left no room for the final argument on some architectures. Fix this by introducing sys_sync_file_range2(int, int, loff_t, loff_t) which all fits nicely. In fact, ARM already had that, but called it sys_arm_sync_file_range. Move it to fs/sync.c and rename it, then implement the needed compatibility routine. And stop the missing syscall check from bitching about the absence of sys_sync_file_range() if we've implemented sys_sync_file_range2() instead. Tested on PPC32 and with 32-bit and 64-bit userspace on PPC64. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-28serial: clear proper MPSC interrupt cause bitsJay Lubomirski
The interrupt clearing code in mpsc_sdma_intr_ack() mistakenly clears the interrupt for both controllers instead of just the one its supposed to. This can result in the other controller appearing to hang because its interrupt was effectively lost. So, don't clear the interrupt cause bits for both MPSC controllers when clearing the interrupt for one of them. Just clear the one that is supposed to be cleared. Signed-off-by: Jay Lubomirski <jaylubo@motorola.com> Acked-by: Mark A. Greer <mgreer@mvista.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-28ext2: fix return of uninitialised variableAndrew Morton
gcc correctly says fs/ext2/super.c: In function 'ext2_remount': fs/ext2/super.c:1055: warning: 'err' may be used uninitialized in this function Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-28mips-jazz: correct flags for timer io resourceAlexey Dobriyan
arch/mips/jazz/setup.c:55:4: error: Initializer entry defined twice Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-28w1_therm_read_bin: don't call flush_signals()Evgeniy Polyakov
This can disrupt userspace signal management. Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Cc: Roland McGrath <roland@redhat.com> Cc: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-28relayfs: fix overwritesMasami Hiramatsu
When I use relayfs with "overwrite" mode, read() still sets incorrect number of consumed bytes. Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Acked-by: Tom Zanussi <zanussi@us.ibm.com> Acked-by: David Wilder <dwilder@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-28relay file read: start-pos fixDavid Wilder
Fix a bug in the relay read interface causing the number of consumed bytes to be set incorrectly. Signed-off-by: Tom Zanussi <zanussi@us.ibm.com> Signed-off-by: David Wilder <dwilder@us.ibm.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-28ALSA: use __devexit_pRandy Dunlap
Change __devexit to __devexit_p: sound/isa/opl3sa2.c:956: error: expected expression before '__attribute__' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Jaroslav Kysela <perex@suse.cz> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-28Documentation/HOWTO: update URLs of git treesStefan Richter
Also, remove outdated 1394 tree and mention MAINTAINERS as pointer to development trees. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-28fix section mismatch in chipsfbOlaf Hering
WARNING: drivers/built-in.o(.text+0x8742a): Section mismatch: reference to .init.data:chipsfb_fix (between 'chipsfb_pci_init' and 'chipsfb_set_par') WARNING: drivers/built-in.o(.text+0x87432): Section mismatch: reference to .init.data:chipsfb_fix (between 'chipsfb_pci_init' and 'chipsfb_set_par') WARNING: drivers/built-in.o(.text+0x87442): Section mismatch: reference to .init.data:chipsfb_var (between 'chipsfb_pci_init' and 'chipsfb_set_par') WARNING: drivers/built-in.o(.text+0x8744a): Section mismatch: reference to .init.data:chipsfb_var (between 'chipsfb_pci_init' and 'chipsfb_set_par') init_chips is only called from chipsfb_pci_init chipsfb_fix and chipsfb_var are only referenced from init_chips Signed-off-by: Olaf Hering <olaf@aepfle.de> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-28avoid spurious POLLIN returns in signalfdDavide Libenzi
The new code in kernel/signal.c does not allow fetching private signals from another task. This patch avoid spurious POLLIN returns from a signalfd poll(2) operation. Signed-off-by: Davide Libenzi <davidel@xmailserver.org> Cc: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-28saa7134: fix thread shutdown handlingJeff Mahoney
This patch changes the test for the thread pid from >= 0 to > 0. When the saa8134 driver initialization fails after a certain point, it goes through the complete shutdown process for the driver. Part of shutting it down includes tearing down the thread for tv audio. The test for tearing down the thread tests for >= 0. Since the dev structure is kzalloc'd, the test will always be true if we haven't tried to start the thread yet. We end up waiting on pid 0 to complete, which will never happen, so we lock up. This bug was observed in Novell Bugzilla 284718, when request_irq() failed. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-28ALSA: fix ice1712 section mismatchRandy Dunlap
Cannot mix const and __initdata: sound/pci/ice1712/prodigy192.c:708: error: ak4114_controls causes a section type conflict Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Jaroslav Kysela <perex@suse.cz> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-28IOATDMA: fix section mismatchesRandy Dunlap
Rename struct pci_driver data so that false section mismatch warnings won't be produced. Sam, ISTM that depending on variable names is the weakest & worst part of modpost section checking. Should __init_refok work here? I got build errors when I tried to use it, probably because the struct pci_driver probe and remove methods are not marked "__init_refok". WARNING: drivers/dma/ioatdma.o(.data+0x10): Section mismatch: reference to .init.text: (between 'ioat_pci_drv' and 'ioat_pci_tbl') WARNING: drivers/dma/ioatdma.o(.data+0x14): Section mismatch: reference to .exit.text: (between 'ioat_pci_drv' and 'ioat_pci_tbl') Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Chris Leech <christopher.leech@intel.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-28Fix Kconfig dependency problems wrt boolean menuconfigsTrent Piepho
If one has a dependency chain (tristate)FOO depends on (bool)BAR depends on (tristate)BAZ, build problems will result. If BAZ=m, then BAR can be set y, which allows FOO=y. It's possible to have FOO=y && BAZ=m, which wouldn't be allowed if FOO depended directly on BAZ. In effect, the bool promotes the tristate from m to y. This ends up causing a problem with several menuconfigs that look like: menuconfig BAR bool depends on BAZ [tristate] if BAR config FOO tristate endif The solution used here is to add the dependencies of BAR to the if statement, so that items in the if block will gain a direct non-bool-promoted dependency on BAZ. This is how it would work if a menu was used instead of an if block. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: "David S. Miller" <davem@davemloft.net> Acked-by: Jeff Garzik <jeff@garzik.org> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-28mm: kill validate_anon_vma to avoid mapcount BUGHugh Dickins
validate_anon_vma gave a useful check on the integrity of the anon_vma list when Andrea was developing obj rmap; but it was not enabled in SLES9 itself, nor in mainline, until Nick changed commented-out RMAP_DEBUG to configurable CONFIG_DEBUG_VM in 2.6.17. Now Petr Vandrovec reports that its BUG_ON(mapcount > 100000) can easily crash a CONFIG_DEBUG_VM=y system. That limit was just an arbitrary number to protect against an infinite loop. We could raise it to something enormous (depending on sizeof struct vma and size of memory?); but I rather think validate_anon_vma has outlived its usefulness, and is better just removed - which gives a magnificent performance boost to anything like Petr's test program ;) Of course, a very long anon_vma list is bad news for preemption latency, and I believe there has been one recent report of such: let's not forget that, but validate_anon_vma only makes it worse not better. Signed-off-by: Hugh Dickins <hugh@veritas.com> Cc: Petr Vandrovec <petr@vmware.com> Acked-by: Nick Piggin <npiggin@suse.de> Cc: Andrea Arcangeli <andrea@suse.de> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-28PNP SMCf010 quirk: auto-config device if BIOS left it brokenBjorn Helgaas
Some HP firmware leaves the SMCf010 IRDA device incompletely configured, or reports the wrong resources in _CRS. As a workaround, when we find such a device, try to auto-configure the device. This ignores the _CRS data, picks a config from _PRS, and runs _SRS to configure the device. This makes smsc-ircc2 work correctly with PNP resources (with no preconfiguration!) on all the machines I tested. I think Windows does something like this by default for all devices, so we should consider doing the same thing in Linux. This patch addresses part of the 2.6.22 regression: "no irda0 interface (2.6.21 was OK), smsc does not find chip" It fixes smsc-ircc2 PNP device detection on HP nc6000, nc6220, nw8000, nw8240, and possibly other machines. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Samuel Ortiz <samuel@sortiz.org> Cc: "Linus Walleij (LD/EAB)" <linus.walleij@ericsson.com> Cc: Andrey Borzenkov <arvidjaar@mail.ru> Cc: Michal Piotrowski <michal.k.k.piotrowski@gmail.com> Cc: Adam Belay <ambx1@neo.rr.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-28smsc-ircc2: skip preconfiguration for PNP devicesBjorn Helgaas
If we rely on the device resources from PNPBIOS, we also have to rely on the BIOS to configure any bridges on the way to the device. Using the PNPBIOS resources but changing the configuration of a bridge behind the back of the firmware is likely to make things inconsistent. This patch addresses part of the 2.6.22 regression: "no irda0 interface (2.6.21 was OK), smsc does not find chip" It fixes smsc-ircc2 PNP device detection on HP nx5000 laptops. Other laptops, including HP nc6000, HP nc8000, HP nw8000, and Toshiba Portege 4000, still need PNP quirks to make this work. With "smsc-ircc2.nopnp", we do the legacy device probe, including manual bridge preconfiguration, as before. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Samuel Ortiz <samuel@sortiz.org> Acked-by: "Linus Walleij (LD/EAB)" <linus.walleij@ericsson.com> Cc: Andrey Borzenkov <arvidjaar@mail.ru> Cc: Michal Piotrowski <michal.k.k.piotrowski@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Adam Belay <ambx1@neo.rr.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-28mtrr/cyrix: fix sectionsRandy Dunlap
main.c::mtrr_add() or mtrr_del() [exported] calls main.c::mtrr_add_page() or mtrr_del_page() or mtrr_restore() [resume] calls main.c::set_mtrr() calls main.c::ipi_handler() calls main.c::mtrr_if->set_all() == which can be cyrix_set_all WARNING: arch/i386/kernel/built-in.o(.text+0x8657): Section mismatch: reference to .init.data: (between 'cyrix_set_all' and 'centaur_get_free_region') WARNING: arch/i386/kernel/built-in.o(.text+0x866b): Section mismatch: reference to .init.data: (between 'cyrix_set_all' and 'centaur_get_free_region') WARNING: arch/i386/kernel/built-in.o(.text+0x867e): Section mismatch: reference to .init.data: (between 'cyrix_set_all' and 'centaur_get_free_region') WARNING: arch/i386/kernel/built-in.o(.text+0x8684): Section mismatch: reference to .init.data: (between 'cyrix_set_all' and 'centaur_get_free_region') WARNING: arch/i386/kernel/built-in.o(.text+0x868a): Section mismatch: reference to .init.data: (between 'cyrix_set_all' and 'centaur_get_free_region') Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-28eventfd: clean compile when CONFIG_EVENTFD=nRandy Dunlap
Fix gcc warning and add parameter checking when CONFIG_EVENTFD=n: fs/aio.c: In function 'aio_complete': fs/aio.c:955: warning: statement with no effect Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Davide Libenzi <davidel@xmailserver.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-28atyfb: Fix XCLK frequency on Apple iBook1Ville Syrjala
Fix a regression on Apple iBook1. Changes in the clock init code caused an incorrect XCLK frequency to be used leading to a corrupted display. Signed-off-by: Ville Syrjala <syrjala@sci.fi> Cc: Olaf Hering <olaf@aepfle.de> Cc: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-28zero out last page for llseek/writeMichael Halcrow
When one llseek's past the end of the file and then writes, every page past the previous end of the file should be cleared. Trevor found that the code, as is, does not assure that the very last page is always cleared. This patch takes care of that. Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-28eCryptfs: initialize crypt_stat in setattrMichael Halcrow
Recent changes in eCryptfs have made it possible to get to ecryptfs_setattr() with an uninitialized crypt_stat struct. This results in a wide and colorful variety of unpleasantries. This patch properly initializes the crypt_stat structure in ecryptfs_setattr() when it is necessary to do so. Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-28eCryptfs: fix write zeros behaviorMichael Halcrow
This patch fixes the processes involved in wiping regions of the data during truncate and write events, fixing a kernel hang in 2.6.22-rc4 while assuring that zero values are written out to the appropriate locations during events in which the i_size will change. The range passed to ecryptfs_truncate() from ecryptfs_prepare_write() includes the page that is the object of ecryptfs_prepare_write(). This leads to a kernel hang as read_cache_page() is executed on the same page in the ecryptfs_truncate() execution path. This patch remedies this by limiting the range passed to ecryptfs_truncate() so as to exclude the page that is the object of ecryptfs_prepare_write(); it also adds code to ecryptfs_prepare_write() to zero out the region of its own page when writing past the i_size position. This patch also modifies ecryptfs_truncate() so that when a file is truncated to a smaller size, eCryptfs will zero out the contents of the new last page from the new size through to the end of the last page. Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-28phy: Fix phy_id for Vitesse 824x PHYKumar Gala
The phy_id specified for the Vitesse 824x PHY would never match because it was expecting bits to be set that would be masked by the phy_id_mask. Fix the phy_id so it will match properly, and changed the mdio_bus_match to mask both the driver and devices phy_id with the mask so we dont have this issue in the future. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-06-27Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] Make SN2 PCI code use ioremap rather than manually mangle the address [IA64] Force error to surface in nofault code [IA64] change sh_change_coherence oemcall to use nolock [IA64] remove duplicate header include line [IA64] Correct unwind validation code [IA64] is_power_of_2-ia64/mm/hugetlbpage.c
2007-06-27Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: libata: kill ATA_HORKAGE_DMA_RW_ONLY libata: use PIO for non-16 byte aligned ATAPI commands libata: call ata_check_atapi_dma() with qc better prepared libata: fix infinite EH waiting bug libata: fix ata_dev_disable() pata_it821x: fix section mismatch warning libata: remove unused variable from ata_eh_reset() libata: be less verbose about hpa libata: kill non-sense warning message libata: kill the infamous abnormal status message HPT374 is UDMA100 not UDMA133