summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-03-23KVM: VMX: Fix enable VPID conditionsWanpeng Li
This can be reproduced by running L2 on L1, and disable VPID on L0 if w/o commit "KVM: nVMX: Fix nested VPID vmx exec control", the L2 crash as below: KVM: entry failed, hardware error 0x7 EAX=00000000 EBX=00000000 ECX=00000000 EDX=000306c3 ESI=00000000 EDI=00000000 EBP=00000000 ESP=00000000 EIP=0000fff0 EFL=00000002 [-------] CPL=0 II=0 A20=1 SMM=0 HLT=0 ES =0000 00000000 0000ffff 00009300 CS =f000 ffff0000 0000ffff 00009b00 SS =0000 00000000 0000ffff 00009300 DS =0000 00000000 0000ffff 00009300 FS =0000 00000000 0000ffff 00009300 GS =0000 00000000 0000ffff 00009300 LDT=0000 00000000 0000ffff 00008200 TR =0000 00000000 0000ffff 00008b00 GDT= 00000000 0000ffff IDT= 00000000 0000ffff CR0=60000010 CR2=00000000 CR3=00000000 CR4=00000000 DR0=0000000000000000 DR1=0000000000000000 DR2=0000000000000000 DR3=0000000000000000 DR6=00000000ffff0ff0 DR7=0000000000000400 EFER=0000000000000000 Reference SDM 30.3 INVVPID: Protected Mode Exceptions - #UD - If not in VMX operation. - If the logical processor does not support VPIDs (IA32_VMX_PROCBASED_CTLS2[37]=0). - If the logical processor supports VPIDs (IA32_VMX_PROCBASED_CTLS2[37]=1) but does not support the INVVPID instruction (IA32_VMX_EPT_VPID_CAP[32]=0). So we should check both VPID enable bit in vmx exec control and INVVPID support bit in vmx capability MSRs to enable VPID. This patch adds the guarantee to not enable VPID if either INVVPID or single-context/all-context invalidation is not exposed in vmx capability MSRs. Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Jim Mattson <jmattson@google.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-03-23KVM: nVMX: Fix nested VPID vmx exec controlWanpeng Li
This can be reproduced by running kvm-unit-tests/vmx.flat on L0 w/ vpid disabled. Test suite: VPID Unhandled exception 6 #UD at ip 00000000004051a6 error_code=0000 rflags=00010047 cs=00000008 rax=0000000000000000 rcx=0000000000000001 rdx=0000000000000047 rbx=0000000000402f79 rbp=0000000000456240 rsi=0000000000000001 rdi=0000000000000000 r8=000000000000000a r9=00000000000003f8 r10=0000000080010011 r11=0000000000000000 r12=0000000000000003 r13=0000000000000708 r14=0000000000000000 r15=0000000000000000 cr0=0000000080010031 cr2=0000000000000000 cr3=0000000007fff000 cr4=0000000000002020 cr8=0000000000000000 STACK: @4051a6 40523e 400f7f 402059 40028f We should hide and forbid VPID in L1 if it is disabled on L0. However, nested VPID enable bit is set unconditionally during setup nested vmx exec controls though VPID is not exposed through nested VMX capablity. This patch fixes it by don't set nested VPID enable bit if it is disabled on L0. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: stable@vger.kernel.org Fixes: 5c614b3583e (KVM: nVMX: nested VPID emulation) Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-03-23KVM: x86: correct async page present tracepointWanpeng Li
After async pf setup successfully, there is a broadcast wakeup w/ special token 0xffffffff which tells vCPU that it should wake up all processes waiting for APFs though there is no real process waiting at the moment. The async page present tracepoint print prematurely and fails to catch the special token setup. This patch fixes it by moving the async page present tracepoint after the special token setup. Before patch: qemu-system-x86-8499 [006] ...1 5973.473292: kvm_async_pf_ready: token 0x0 gva 0x0 After patch: qemu-system-x86-8499 [006] ...1 5973.473292: kvm_async_pf_ready: token 0xffffffff gva 0x0 Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-03-23kvm: vmx: Flush TLB when the APIC-access address changesJim Mattson
Quoting from the Intel SDM, volume 3, section 28.3.3.4: Guidelines for Use of the INVEPT Instruction: If EPT was in use on a logical processor at one time with EPTP X, it is recommended that software use the INVEPT instruction with the "single-context" INVEPT type and with EPTP X in the INVEPT descriptor before a VM entry on the same logical processor that enables EPT with EPTP X and either (a) the "virtualize APIC accesses" VM-execution control was changed from 0 to 1; or (b) the value of the APIC-access address was changed. In the nested case, the burden falls on L1, unless L0 enables EPT in vmcs02 when L1 doesn't enable EPT in vmcs12. Signed-off-by: Jim Mattson <jmattson@google.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-03-23KVM: x86: use pic/ioapic destructor when destroy vmPeter Xu
We have specific destructors for pic/ioapic, we'd better use them when destroying the VM as well. Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-03-23KVM: x86: check existance before destroyPeter Xu
Mostly used for split irqchip mode. In that case, these two things are not inited at all, so no need to release. Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-03-21KVM: x86: clear bus pointer when destroyedPeter Xu
When releasing the bus, let's clear the bus pointers to mark it out. If any further device unregister happens on this bus, we know that we're done if we found the bus being released already. Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-03-20KVM: Documentation: document MCE ioctlsLuiz Capitulino
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-03-20KVM: nVMX: don't reset kvm mmu twiceWanpeng Li
kvm mmu is reset once successfully loading CR3 as part of emulating vmentry in nested_vmx_load_cr3(). We should not reset kvm mmu twice. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-03-20PTP: fix ptr_ret.cocci warningskbuild test robot
drivers/ptp/ptp_kvm.c:229:1-3: WARNING: PTR_ERR_OR_ZERO can be used Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR Generated by: scripts/coccinelle/api/ptr_ret.cocci CC: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-03-20kvm: fix usage of uninit spinlock in avic_vm_destroy()Dmitry Vyukov
If avic is not enabled, avic_vm_init() does nothing and returns early. However, avic_vm_destroy() still tries to destroy what hasn't been created. The only bad consequence of this now is that avic_vm_destroy() uses svm_vm_data_hash_lock that hasn't been initialized (and is not meant to be used at all if avic is not enabled). Return early from avic_vm_destroy() if avic is not enabled. It has nothing to destroy. Signed-off-by: Dmitry Vyukov <dvyukov@google.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: David Hildenbrand <david@redhat.com> Cc: kvm@vger.kernel.org Cc: syzkaller@googlegroups.com Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-03-20KVM: VMX: downgrade warning on unexpected exit codeRadim Krčmář
We never needed the call trace and we better rate-limit if it can be triggered by a guest. Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-03-19Linux 4.11-rc3Linus Torvalds
2017-03-19mm/swap: don't BUG_ON() due to uninitialized swap slot cacheLinus Torvalds
This BUG_ON() triggered for me once at shutdown, and I don't see a reason for the check. The code correctly checks whether the swap slot cache is usable or not, so an uninitialized swap slot cache is not actually problematic afaik. I've temporarily just switched the BUG_ON() to a WARN_ON_ONCE(), since I'm not sure why that seemingly pointless check was there. I suspect the real fix is to just remove it entirely, but for now we'll warn about it but not bring the machine down. Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-03-19Merge tag 'powerpc-4.11-5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull more powerpc fixes from Michael Ellerman: "A couple of minor powerpc fixes for 4.11: - wire up statx() syscall - don't print a warning on memory hotplug when HPT resizing isn't available Thanks to: David Gibson, Chandan Rajendra" * tag 'powerpc-4.11-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/pseries: Don't give a warning when HPT resizing isn't available powerpc: Wire up statx() syscall
2017-03-19Merge branch 'parisc-4.11-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc fixes from Helge Deller: - Mikulas Patocka added support for R_PARISC_SECREL32 relocations in modules with CONFIG_MODVERSIONS. - Dave Anglin optimized the cache flushing for vmap ranges. - Arvind Yadav provided a fix for a potential NULL pointer dereference in the parisc perf code (and some code cleanups). - I wired up the new statx system call, fixed some compiler warnings with the access_ok() macro and fixed shutdown code to really halt a system at shutdown instead of crashing & rebooting. * 'parisc-4.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Fix system shutdown halt parisc: perf: Fix potential NULL pointer dereference parisc: Avoid compiler warnings with access_ok() parisc: Wire up statx system call parisc: Optimize flush_kernel_vmap_range and invalidate_kernel_vmap_range parisc: support R_PARISC_SECREL32 relocation in modules
2017-03-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds
Pull SCSI target fixes from Nicholas Bellinger: "The bulk of the changes are in qla2xxx target driver code to address various issues found during Cavium/QLogic's internal testing (stable CC's included), along with a few other stability and smaller miscellaneous improvements. There are also a couple of different patch sets from Mike Christie, which have been a result of his work to use target-core ALUA logic together with tcm-user backend driver. Finally, a patch to address some long standing issues with pass-through SCSI export of TYPE_TAPE + TYPE_MEDIUM_CHANGER devices, which will make folks using physical (or virtual) magnetic tape happy" * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (28 commits) qla2xxx: Update driver version to 9.00.00.00-k qla2xxx: Fix delayed response to command for loop mode/direct connect. qla2xxx: Change scsi host lookup method. qla2xxx: Add DebugFS node to display Port Database qla2xxx: Use IOCB interface to submit non-critical MBX. qla2xxx: Add async new target notification qla2xxx: Export DIF stats via debugfs qla2xxx: Improve T10-DIF/PI handling in driver. qla2xxx: Allow relogin to proceed if remote login did not finish qla2xxx: Fix sess_lock & hardware_lock lock order problem. qla2xxx: Fix inadequate lock protection for ABTS. qla2xxx: Fix request queue corruption. qla2xxx: Fix memory leak for abts processing qla2xxx: Allow vref count to timeout on vport delete. tcmu: Convert cmd_time_out into backend device attribute tcmu: make cmd timeout configurable tcmu: add helper to check if dev was configured target: fix race during implicit transition work flushes target: allow userspace to set state to transitioning target: fix ALUA transition timeout handling ...
2017-03-19Merge branch 'libnvdimm-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull device-dax fixes from Dan Williams: "The device-dax driver was not being careful to handle falling back to smaller fault-granularity sizes. The driver already fails fault attempts that are smaller than the device's alignment, but it also needs to handle the cases where a larger page mapping could be established. For simplicity of the immediate fix the implementation just signals VM_FAULT_FALLBACK until fault-size == device-alignment. One fix is for -stable to address pmd-to-pte fallback from the original implementation, another fix is for the new (introduced in 4.11-rc1) pud-to-pmd regression, and a typo fix comes along for the ride. These have received a build success notification from the kbuild robot" * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: device-dax: fix debug output typo device-dax: fix pud fault fallback handling device-dax: fix pmd/pte fault fallback handling
2017-03-18qla2xxx: Update driver version to 9.00.00.00-kHimanshu Madhani
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> signed-off-by: Giridhar Malavali <giridhar.malavali@cavium.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18qla2xxx: Fix delayed response to command for loop mode/direct connect.Quinn Tran
Current driver wait for FW to be in the ready state before processing in-coming commands. For Arbitrated Loop or Point-to- Point (not switch), FW Ready state can take a while. FW will transition to ready state after all Nports have been logged in. In the mean time, certain initiators have completed the login and starts IO. Driver needs to start processing all queues if FW is already started. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18qla2xxx: Change scsi host lookup method.Quinn Tran
For target mode, when new scsi command arrive, driver first performs a look up of the SCSI Host. The current look up method is based on the ALPA portion of the NPort ID. For Cisco switch, the ALPA can not be used as the index. Instead, the new search method is based on the full value of the Nport_ID via btree lib. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18qla2xxx: Add DebugFS node to display Port DatabaseHimanshu Madhani
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@cavium.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18qla2xxx: Use IOCB interface to submit non-critical MBX.Quinn Tran
The Mailbox interface is currently over subscribed. We like to reserve the Mailbox interface for the chip managment and link initialization. Any non essential Mailbox command will be routed through the IOCB interface. The IOCB interface is able to absorb more commands. Following commands are being routed through IOCB interface - Get ID List (007Ch) - Get Port DB (0064h) - Get Link Priv Stats (006Dh) Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18qla2xxx: Add async new target notificationQuinn Tran
Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18qla2xxx: Export DIF stats via debugfsAnil Gurumurthy
Signed-off-by: Anil Gurumurthy <anil.gurumurthy@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18qla2xxx: Improve T10-DIF/PI handling in driver.Quinn Tran
Add routines to support T10 DIF tag. Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Anil Gurumurthy <anil.gurumurthy@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18qla2xxx: Allow relogin to proceed if remote login did not finishQuinn Tran
If the remote port have started the login process, then the PLOGI and PRLI should be back to back. Driver will allow the remote port to complete the process. For the case where the remote port decide to back off from sending PRLI, this local port sets an expiration timer for the PRLI. Once the expiration time passes, the relogin retry logic is allowed to go through and perform login with the remote port. Signed-off-by: Quinn Tran <quinn.tran@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18qla2xxx: Fix sess_lock & hardware_lock lock order problem.Quinn Tran
The main lock that needs to be held for CMD or TMR submission to upper layer is the sess_lock. The sess_lock is used to serialize cmd submission and session deletion. The addition of hardware_lock being held is not necessary. This patch removes hardware_lock dependency from CMD/TMR submission. Use hardware_lock only for error response in this case. Path1 CPU0 CPU1 ---- ---- lock(&(&ha->tgt.sess_lock)->rlock); lock(&(&ha->hardware_lock)->rlock); lock(&(&ha->tgt.sess_lock)->rlock); lock(&(&ha->hardware_lock)->rlock); Path2/deadlock *** DEADLOCK *** Call Trace: dump_stack+0x85/0xc2 print_circular_bug+0x1e3/0x250 __lock_acquire+0x1425/0x1620 lock_acquire+0xbf/0x210 _raw_spin_lock_irqsave+0x53/0x70 qlt_sess_work_fn+0x21d/0x480 [qla2xxx] process_one_work+0x1f4/0x6e0 Cc: <stable@vger.kernel.org> Cc: Bart Van Assche <Bart.VanAssche@sandisk.com> Reported-by: Bart Van Assche <Bart.VanAssche@sandisk.com> Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18qla2xxx: Fix inadequate lock protection for ABTS.Quinn Tran
Normally, ABTS is sent to Target Core as Task MGMT command. In the case of error, qla2xxx needs to send response, hardware_lock is required to prevent request queue corruption. Cc: <stable@vger.kernel.org> Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18qla2xxx: Fix request queue corruption.Quinn Tran
When FW notify driver or driver detects low FW resource, driver tries to send out Busy SCSI Status to tell Initiator side to back off. During the send process, the lock was not held. Cc: <stable@vger.kernel.org> Signed-off-by: Quinn Tran <quinn.tran@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18qla2xxx: Fix memory leak for abts processingQuinn Tran
Cc: <stable@vger.kernel.org> Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18qla2xxx: Allow vref count to timeout on vport delete.Joe Carnuccio
Cc: <stable@vger.kernel.org> Signed-off-by: Joe Carnuccio <joe.carnuccio@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18tcmu: Convert cmd_time_out into backend device attributeNicholas Bellinger
Instead of putting cmd_time_out under ../target/core/user_0/foo/control, which has historically been used by parameters needed for initial backend device configuration, go ahead and move cmd_time_out into a backend device attribute. In order to do this, tcmu_module_init() has been updated to create a local struct configfs_attribute **tcmu_attrs, that is based upon the existing passthrough_attrib_attrs along with the new cmd_time_out attribute. Once **tcm_attrs has been setup, go ahead and point it at tcmu_ops->tb_dev_attrib_attrs so it's picked up by target-core. Also following MNC's previous change, ->cmd_time_out is stored in milliseconds but exposed via configfs in seconds. Also, note this patch restricts the modification of ->cmd_time_out to before + after the TCMU device has been configured, but not while it has active fabric exports. Cc: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18tcmu: make cmd timeout configurableMike Christie
A single daemon could implement multiple types of devices using multuple types of real devices that may not support restarting from crashes and/or handling tcmu timeouts. This makes the cmd timeout configurable, so handlers that do not support it can turn if off for now. Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18tcmu: add helper to check if dev was configuredMike Christie
This adds a helper to check if the dev was configured. It will be used in the next patch to prevent updates to some config settings after the device has been setup. Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18Merge tag 'openrisc-for-linus' of git://github.com/openrisc/linuxLinus Torvalds
Pull OpenRISC fixes from Stafford Horne: "OpenRISC fixes for build issues that were exposed by kbuild robots after 4.11 merge. All from allmodconfig builds. This includes: - bug in the handling of 8-byte get_user() calls - module build failure due to multile missing symbol exports" * tag 'openrisc-for-linus' of git://github.com/openrisc/linux: openrisc: Export symbols needed by modules openrisc: fix issue handling 8 byte get_user calls openrisc: xchg: fix `computed is not used` warning
2017-03-18target: fix race during implicit transition work flushesMike Christie
This fixes the following races: 1. core_alua_do_transition_tg_pt could have read tg_pt_gp_alua_access_state and gone into this if chunk: if (!explicit && atomic_read(&tg_pt_gp->tg_pt_gp_alua_access_state) == ALUA_ACCESS_STATE_TRANSITION) { and then core_alua_do_transition_tg_pt_work could update the state. core_alua_do_transition_tg_pt would then only set tg_pt_gp_alua_pending_state and the tg_pt_gp_alua_access_state would not get updated with the second calls state. 2. core_alua_do_transition_tg_pt could be setting tg_pt_gp_transition_complete while the tg_pt_gp_transition_work is already completing. core_alua_do_transition_tg_pt then waits on the completion that will never be called. To handle these issues, we just call flush_work which will return when core_alua_do_transition_tg_pt_work has completed so there is no need to do the complete/wait. And, if core_alua_do_transition_tg_pt_work was running, instead of trying to sneak in the state change, we just schedule up another core_alua_do_transition_tg_pt_work call. Note that this does not handle a possible race where there are multiple threads call core_alua_do_transition_tg_pt at the same time. I think we need a mutex in target_tg_pt_gp_alua_access_state_store. Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18target: allow userspace to set state to transitioningMike Christie
Userspace target_core_user handlers like tcmu-runner may want to set the ALUA state to transitioning while it does implicit transitions. This patch allows that state when set from configfs. Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18target: fix ALUA transition timeout handlingMike Christie
The implicit transition time tells initiators the min time to wait before timing out a transition. We currently schedule the transition to occur in tg_pt_gp_implicit_trans_secs seconds so there is no room for delays. If core_alua_do_transition_tg_pt_work->core_alua_update_tpg_primary_metadata needs to write out info to a remote file, then the initiator can easily time out the operation. Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18target: Use system workqueue for ALUA transitionsMike Christie
If tcmu-runner is processing a STPG and needs to change the kernel's ALUA state then we cannot use the same work queue for task management requests and ALUA transitions, because we could deadlock. The problem occurs when a STPG times out before tcmu-runner is able to call into target_tg_pt_gp_alua_access_state_store-> core_alua_do_port_transition -> core_alua_do_transition_tg_pt -> queue_work. In this case, the tmr is on the work queue waiting for the STPG to complete, but the STPG transition is now queued behind the waiting tmr. Note: This bug will also be fixed by this patch: http://www.spinics.net/lists/target-devel/msg14560.html which switches the tmr code to use the system workqueues. For both, I am not sure if we need a dedicated workqueue since it is not a performance path and I do not think we need WQ_MEM_RECLAIM to make forward progress to free up memory like the block layer does. Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18target: fail ALUA transitions for pscsiMike Christie
We do not setup the LU group for pscsi devices, so if you write a state to alua_access_state that will cause a transition you will get a NULL pointer dereference. This patch will fail attempts to try and transition the path for backend devices that set the TRANSPORT_FLAG_PASSTHROUGH_ALUA flag. Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18target: allow ALUA setup for some passthrough backendsMike Christie
This patch allows passthrough backends to use the core/base LIO ALUA setup and state checks, but still handle the execution of commands. This will allow the target_core_user module to execute STPG and RTPG in userspace, and not have to duplicate the ALUA state checks, path information (needed so we can check if command is executable on specific paths) and setup (rtslib sets/updates the configfs ALUA interface like it does for iblock or file). For STPG, the target_core_user userspace daemon, tcmu-runner will still execute the STPG, and to update the core/base LIO state it will use the existing configfs interface. For RTPG, tcmu-runner will loop over configfs and/or cache the state. Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18tcmu: return on first Opt parse failureMike Christie
We only were returing failure if the last opt to be parsed failed. This has a return failure when we first detect a failure. Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18tcmu: allow hw_max_sectors greater than 128Mike Christie
tcmu hard codes the hw_max_sectors to 128 which is a litle small. Userspace uses the max_sectors to report the optimal IO size and some initiators perform better with larger IOs (open-iscsi seems to do better with 256 to 512 depending on the test). (Fix do not display hw max sectors twice - MNC) Signed-off-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18target: Drop pointless tfo->check_stop_free checkNicholas Bellinger
All in-tree fabric drivers provide a tfo->check_stop_free(), so there is no need to do the extra check within existing transport_cmd_check_stop_to_fabric() code. Just to be sure, add a check in target_fabric_tf_ops_check() to notify any out-of-tree drivers that might be missing it. Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2017-03-18parisc: Fix system shutdown haltHelge Deller
On those parisc machines which don't provide a software power off function, the system currently kills the init process at the end of a shutdown and unexpectedly restarts insteads of halting. Fix it by adding a loop which will not return. Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org # 4.9+
2017-03-18parisc: perf: Fix potential NULL pointer dereferenceArvind Yadav
Fix potential NULL pointer dereference and clean up coding style errors (code indent, trailing whitespaces). Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Helge Deller <deller@gmx.de>
2017-03-18Merge branch 'smp-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull CPU hotplug fix from Thomas Gleixner: "A single fix preventing the concurrent execution of the CPU hotplug callback install/invocation machinery. Long standing bug caused by a massive brain slip of that Gleixner dude, which went unnoticed for almost a year" * 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: cpu/hotplug: Serialize callback invocations proper
2017-03-17Merge tag 'pm-4.11-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These fix a few more intel_pstate issues and one small issue in the cpufreq core. Specifics: - Fix breakage in the intel_pstate's debugfs interface for PID controller tuning (Rafael Wysocki) - Fix computations related to P-state limits in intel_pstate to avoid excessive rounding errors leading to visible inaccuracies (Srinivas Pandruvada, Rafael Wysocki) - Add a missing newline to a message printed by one function in the cpufreq core and clean up that function (Rafael Wysocki)" * tag 'pm-4.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: Fix and clean up show_cpuinfo_cur_freq() cpufreq: intel_pstate: Avoid percentages in limits-related computations cpufreq: intel_pstate: Correct frequency setting in the HWP mode cpufreq: intel_pstate: Update pid_params.sample_rate_ns in pid_param_set()
2017-03-18Merge branches 'pm-cpufreq-fixes' and 'intel_pstate-fixes'Rafael J. Wysocki
* pm-cpufreq-fixes: cpufreq: Fix and clean up show_cpuinfo_cur_freq() * intel_pstate-fixes: cpufreq: intel_pstate: Avoid percentages in limits-related computations cpufreq: intel_pstate: Correct frequency setting in the HWP mode cpufreq: intel_pstate: Update pid_params.sample_rate_ns in pid_param_set()
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-16 00:52:10 +0000