| Age | Commit message (Collapse) | Author |
|---|
|
Make sure RTA_FLOW is at least 4B before using.
Fixes: 4e902c57417c ("[IPv4]: FIB configuration using struct fib_config")
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
syzbot reported uninit-value:
============================================================
BUG: KMSAN: uninit-value in fib_get_nhs+0xac4/0x1f80
net/ipv4/fib_semantics.c:708
fib_get_nhs+0xac4/0x1f80 net/ipv4/fib_semantics.c:708
fib_create_info+0x2411/0x4870 net/ipv4/fib_semantics.c:1453
fib_table_insert+0x45c/0x3a10 net/ipv4/fib_trie.c:1224
inet_rtm_newroute+0x289/0x420 net/ipv4/fib_frontend.c:886
Add helper to validate RTA_GATEWAY length before using the attribute.
Fixes: 4e902c57417c ("[IPv4]: FIB configuration using struct fib_config")
Reported-by: syzbot+d4b9a2851cc3ce998741@syzkaller.appspotmail.com
Signed-off-by: David Ahern <dsahern@kernel.org>
Cc: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from.. Santa?
No regressions on our radar at this point. The igc problem fixed here
was the last one I was tracking but it was broken in previous
releases, anyway. Mostly driver fixes and a couple of largish SMC
fixes.
Current release - regressions:
- xsk: initialise xskb free_list_node, fixup for a -rc7 fix
Current release - new code bugs:
- mlx5: handful of minor fixes:
- use first online CPU instead of hard coded CPU
- fix some error handling paths in 'mlx5e_tc_add_fdb_flow()'
- fix skb memory leak when TC classifier action offloads are disabled
- fix memory leak with rules with internal OvS port
Previous releases - regressions:
- igc: do not enable crosstimestamping for i225-V models
Previous releases - always broken:
- udp: use datalen to cap ipv6 udp max gso segments
- fix use-after-free in tw_timer_handler due to early free of stats
- smc: fix kernel panic caused by race of smc_sock
- smc: don't send CDC/LLC message if link not ready, avoid timeouts
- sctp: use call_rcu to free endpoint, avoid UAF in sock diag
- bridge: mcast: add and enforce query interval minimum
- usb: pegasus: do not drop long Ethernet frames
- mlx5e: fix ICOSQ recovery flow for XSK
- nfc: uapi: use kernel size_t to fix user-space builds"
* tag 'net-5.16-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits)
fsl/fman: Fix missing put_device() call in fman_port_probe
selftests: net: using ping6 for IPv6 in udpgro_fwd.sh
Documentation: fix outdated interpretation of ip_no_pmtu_disc
net/ncsi: check for error return from call to nla_put_u32
net: bridge: mcast: fix br_multicast_ctx_vlan_global_disabled helper
net: fix use-after-free in tw_timer_handler
selftests: net: Fix a typo in udpgro_fwd.sh
selftests/net: udpgso_bench_tx: fix dst ip argument
net: bridge: mcast: add and enforce startup query interval minimum
net: bridge: mcast: add and enforce query interval minimum
ipv6: raw: check passed optlen before reading
xsk: Initialise xskb free_list_node
net/mlx5e: Fix wrong features assignment in case of error
net/mlx5e: TC, Fix memory leak with rules with internal port
ionic: Initialize the 'lif->dbid_inuse' bitmap
igc: Fix TX timestamp support for non-MSI-X platforms
igc: Do not enable crosstimestamping for i225-V models
net/smc: fix kernel panic caused by race of smc_sock
net/smc: don't send CDC/LLC message if link not ready
NFC: st21nfca: Fix memory leak in device probe and remove
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc fixes from Greg KH:
"Here are two misc driver fixes for 5.16-final:
- binder accounting fix to resolve reported problem
- nitro_enclaves fix for mmap assert warning output
Both of these have been for over a week with no reported issues"
* tag 'char-misc-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
nitro_enclaves: Use get_user_pages_unlocked() call to handle mmap assert
binder: fix async_free_space accounting for empty parcels
|
|
Pull USB fixes from Greg KH:
"Here are some small USB driver fixes for 5.16 to resolve some reported
problems:
- mtu3 driver fixes
- typec ucsi driver fix
- xhci driver quirk added
- usb gadget f_fs fix for reported crash
All of these have been in linux-next for a while with no reported
problems"
* tag 'usb-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: typec: ucsi: Only check the contract if there is a connection
xhci: Fresco FL1100 controller should not have BROKEN_MSI quirk set.
usb: mtu3: set interval of FS intr and isoc endpoint
usb: mtu3: fix list_head check warning
usb: mtu3: add memory barrier before set GPD's HWO
usb: mtu3: fix interval value for intr and isoc
usb: gadget: f_fs: Clear ffs_eventfd in ffs_data_clear.
|
|
The reference taken by 'of_find_device_by_node()' must be released when
not needed anymore.
Add the corresponding 'put_device()' in the and error handling paths.
Fixes: 18a6c85fcc78 ("fsl/fman: Add FMan Port Support")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
udpgro_fwd.sh output following message:
ping: 2001:db8:1::100: Address family for hostname not supported
Using ping6 when pinging IPv6 addresses.
Fixes: a062260a9d5f ("selftests: net: add UDP GRO forwarding self-tests")
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The updating way of pmtu has changed, but documentation is still in the
old way. So this patch updates the interpretation of ip_no_pmtu_disc and
min_pmtu.
See commit 28d35bcdd3925 ("net: ipv4: don't let PMTU updates increase
route MTU")
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: xu xin <xu.xin16@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5 fixes 2021-12-28
This series provides bug fixes to mlx5 driver.
* tag 'mlx5-fixes-2021-12-28' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5e: Fix wrong features assignment in case of error
net/mlx5e: TC, Fix memory leak with rules with internal port
====================
Link: https://lore.kernel.org/r/20211229065352.30178-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As we can see from the comment of the nla_put() that it could return
-EMSGSIZE if the tailroom of the skb is insufficient.
Therefore, it should be better to check the return value of the
nla_put_u32 and return the error code if error accurs.
Also, there are many other functions have the same problem, and if this
patch is correct, I will commit a new version to fix all.
Fixes: 955dc68cb9b2 ("net/ncsi: Add generic netlink family")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20211229032118.1706294-1-jiasheng@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We need to first check if the context is a vlan one, then we need to
check the global bridge multicast vlan snooping flag, and finally the
vlan's multicast flag, otherwise we will unnecessarily enable vlan mcast
processing (e.g. querier timers).
Fixes: 7b54aaaf53cb ("net: bridge: multicast: add vlan state initialization and control")
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Link: https://lore.kernel.org/r/20211228153142.536969-1-nikolay@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A real world panic issue was found as follow in Linux 5.4.
BUG: unable to handle page fault for address: ffffde49a863de28
PGD 7e6fe62067 P4D 7e6fe62067 PUD 7e6fe63067 PMD f51e064067 PTE 0
RIP: 0010:tw_timer_handler+0x20/0x40
Call Trace:
<IRQ>
call_timer_fn+0x2b/0x120
run_timer_softirq+0x1ef/0x450
__do_softirq+0x10d/0x2b8
irq_exit+0xc7/0xd0
smp_apic_timer_interrupt+0x68/0x120
apic_timer_interrupt+0xf/0x20
This issue was also reported since 2017 in the thread [1],
unfortunately, the issue was still can be reproduced after fixing
DCCP.
The ipv4_mib_exit_net is called before tcp_sk_exit_batch when a net
namespace is destroyed since tcp_sk_ops is registered befrore
ipv4_mib_ops, which means tcp_sk_ops is in the front of ipv4_mib_ops
in the list of pernet_list. There will be a use-after-free on
net->mib.net_statistics in tw_timer_handler after ipv4_mib_exit_net
if there are some inflight time-wait timers.
This bug is not introduced by commit f2bf415cfed7 ("mib: add net to
NET_ADD_STATS_BH") since the net_statistics is a global variable
instead of dynamic allocation and freeing. Actually, commit
61a7e26028b9 ("mib: put net statistics on struct net") introduces
the bug since it put net statistics on struct net and free it when
net namespace is destroyed.
Moving init_ipv4_mibs() to the front of tcp_init() to fix this bug
and replace pr_crit() with panic() since continuing is meaningless
when init_ipv4_mibs() fails.
[1] https://groups.google.com/g/syzkaller/c/p1tn-_Kc6l4/m/smuL_FMAAgAJ?pli=1
Fixes: 61a7e26028b9 ("mib: put net statistics on struct net")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Cc: Cong Wang <cong.wang@bytedance.com>
Cc: Fam Zheng <fam.zheng@bytedance.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211228104145.9426-1-songmuchun@bytedance.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
$rvs -> $rcv
Fixes: a062260a9d5f ("selftests: net: add UDP GRO forwarding self-tests")
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Link: https://lore.kernel.org/r/d247d7c8-a03a-0abf-3c71-4006a051d133@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
udpgso_bench_tx call setup_sockaddr() for dest address before
parsing all arguments, if we specify "-p ${dst_port}" after "-D ${dst_ip}",
then ${dst_port} will be ignored, and using default cfg_port 8000.
This will cause test case "multiple GRO socks" failed in udpgro.sh.
Setup sockaddr after parsing all arguments.
Fixes: 3a687bef148d ("selftests: udp gso benchmark")
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/ff620d9f-5b52-06ab-5286-44b945453002@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Nikolay Aleksandrov says:
====================
net: bridge: mcast: add and enforce query interval minimum
This set adds and enforces 1 second minimum value for bridge multicast
query and startup query intervals in order to avoid rearming the timers
too often which could lock and crash the host. I doubt anyone is using
such low values or anything lower than 1 second, so it seems like a good
minimum. In order to be compatible if the value is lower then it is
overwritten and a log message is emitted, since we can't return an error
at this point.
Eric, I looked for the syzbot reports in its dashboard but couldn't find
them so I've added you as the reporter.
I've prepared a global bridge igmp rate limiting patch but wasn't
sure if it's ok for -net. It adds a static limit of 32k packets per
second, I plan to send it for net-next with added drop counters for
each bridge so it can be easily debugged.
Original report can be seen at:
https://lore.kernel.org/netdev/e8b9ce41-57b9-b6e2-a46a-ff9c791cf0ba@gmail.com/
====================
Link: https://lore.kernel.org/r/20211227172116.320768-1-nikolay@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As reported[1] if startup query interval is set too low in combination with
large number of startup queries and we have multiple bridges or even a
single bridge with multiple querier vlans configured we can crash the
machine. Add a 1 second minimum which must be enforced by overwriting the
value if set lower (i.e. without returning an error) to avoid breaking
user-space. If that happens a log message is emitted to let the admin know
that the startup interval has been set to the minimum. It doesn't make
sense to make the startup interval lower than the normal query interval
so use the same value of 1 second. The issue has been present since these
intervals could be user-controlled.
[1] https://lore.kernel.org/netdev/e8b9ce41-57b9-b6e2-a46a-ff9c791cf0ba@gmail.com/
Fixes: d902eee43f19 ("bridge: Add multicast count/interval sysfs entries")
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As reported[1] if query interval is set too low and we have multiple
bridges or even a single bridge with multiple querier vlans configured
we can crash the machine. Add a 1 second minimum which must be enforced
by overwriting the value if set lower (i.e. without returning an error) to
avoid breaking user-space. If that happens a log message is emitted to let
the administrator know that the interval has been set to the minimum.
The issue has been present since these intervals could be user-controlled.
[1] https://lore.kernel.org/netdev/e8b9ce41-57b9-b6e2-a46a-ff9c791cf0ba@gmail.com/
Fixes: d902eee43f19 ("bridge: Add multicast count/interval sysfs entries")
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a check that the user-provided option is at least as long as the
number of bytes we intend to read. Before this patch we would blindly
read sizeof(int) bytes even in cases where the user passed
optlen<sizeof(int), which would potentially read garbage or fault.
Discovered by new tests in https://github.com/google/gvisor/pull/6957 .
The original get_user call predates history in the git repo.
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20211229200947.2862255-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fix from Heiko Carstens:
- fix s390 mcount regex typo in recordmcount.pl
* tag 's390-5.16-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
recordmcount.pl: fix typo in s390 mcount regex
|
|
This commit initialises the xskb's free_list_node when the xskb is
allocated. This prevents a potential false negative returned from a call
to list_empty for that node, such as the one introduced in commit
199d983bc015 ("xsk: Fix crash on double free in buffer pool")
In my environment this issue caused packets to not be received by
the xdpsock application if the traffic was running prior to application
launch. This happened when the first batch of packets failed the xskmap
lookup and XDP_PASS was returned from the bpf program. This action is
handled in the i40e zc driver (and others) by allocating an skbuff,
freeing the xdp_buff and adding the associated xskb to the
xsk_buff_pool's free_list if it hadn't been added already. Without this
fix, the xskb is not added to the free_list because the check to determine
if it was added already returns an invalid positive result. Later, this
caused allocation errors in the driver and the failure to receive packets.
Fixes: 199d983bc015 ("xsk: Fix crash on double free in buffer pool")
Fixes: 2b43470add8c ("xsk: Introduce AF_XDP buffer allocation API")
Signed-off-by: Ciara Loftus <ciara.loftus@intel.com>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20211220155250.2746-1-ciara.loftus@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In case of an error in mlx5e_set_features(), 'netdev->features' must be
updated with the correct state of the device to indicate which features
were updated successfully.
To do that we maintain a copy of 'netdev->features' and update it after
successful feature changes, so we can assign it to back to
'netdev->features' if needed.
However, since not all netdev features are handled by the driver (e.g.
GRO/TSO/etc), some features may not be updated correctly in case of an
error updating another feature.
For example, while requesting to disable TSO (feature which is not
handled by the driver) and enable HW-GRO, if an error occurs during
HW-GRO enable, 'oper_features' will be assigned with 'netdev->features'
and HW-GRO turned off. TSO will remain enabled in such case, which is a
bug.
To solve that, instead of using 'netdev->features' as the baseline of
'oper_features' and changing it on set feature success, use 'features'
instead and update it in case of errors.
Fixes: 75b81ce719b7 ("net/mlx5e: Don't override netdev features field unless in error flow")
Signed-off-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Fix a memory leak with decap rule with internal port as destination
device. The driver allocates a modify hdr action but doesn't set
the flow attr modify hdr action which results in skipping releasing
the modify hdr action when releasing the flow.
backtrace:
[<000000005f8c651c>] krealloc+0x83/0xd0
[<000000009f59b143>] alloc_mod_hdr_actions+0x156/0x310 [mlx5_core]
[<000000002257f342>] mlx5e_tc_match_to_reg_set_and_get_id+0x12a/0x360 [mlx5_core]
[<00000000b44ea75a>] mlx5e_tc_add_fdb_flow+0x962/0x1470 [mlx5_core]
[<0000000003e384a0>] __mlx5e_add_fdb_flow+0x54c/0xb90 [mlx5_core]
[<00000000ed8b22b6>] mlx5e_configure_flower+0xe45/0x4af0 [mlx5_core]
[<00000000024f4ab5>] mlx5e_rep_indr_offload.isra.0+0xfe/0x1b0 [mlx5_core]
[<000000006c3bb494>] mlx5e_rep_indr_setup_tc_cb+0x90/0x130 [mlx5_core]
[<00000000d3dac2ea>] tc_setup_cb_add+0x1d2/0x420
Fixes: b16eb3c81fe2 ("net/mlx5: Support internal port as decap route device")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2021-12-28
This series contains updates to igc driver only.
Vinicius disables support for crosstimestamp on i225-V as lockups are being
observed.
James McLaughlin fixes Tx timestamping support on non-MSI-X platforms.
* '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
igc: Fix TX timestamp support for non-MSI-X platforms
igc: Do not enable crosstimestamping for i225-V models
====================
Link: https://lore.kernel.org/r/20211228182421.340354-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When allocated, this bitmap is not initialized. Only the first bit is set a
few lines below.
Use bitmap_zalloc() to make sure that it is cleared before being used.
Fixes: 6461b446f2a0 ("ionic: Add interrupts and doorbells")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Link: https://lore.kernel.org/r/6a478eae0b5e6c63774e1f0ddb1a3f8c38fa8ade.1640527506.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux fix from Paul Moore:
"One more small SELinux patch to address an uninitialized stack
variable"
* tag 'selinux-pr-20211228' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: initialize proto variable in selinux_ip_postroute_compat()
|
|
Pull auxdisplay fixes from Miguel Ojeda:
"A couple of improvements for charlcd:
- check pointer before dereferencing
- fix coding style issue"
* tag 'auxdisplay-for-linus-v5.16' of git://github.com/ojeda/linux:
auxdisplay: charlcd: checking for pointer reference before dereferencing
auxdisplay: charlcd: fixing coding style issue
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fix from Michael Ellerman:
"Fix DEBUG_WX never reporting any WX mappings, due to use of an
incorrect config symbol since we converted to using generic ptdump"
* tag 'powerpc-5.16-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/ptdump: Fix DEBUG_WX since generic ptdump conversion
|
|
Time synchronization was not properly enabled on non-MSI-X platforms.
Fixes: 2c344ae24501 ("igc: Add support for TX timestamping")
Signed-off-by: James McLaughlin <james.mclaughlin@qsc.com>
Reviewed-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Nechama Kraus <nechamax.kraus@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
It was reported that when PCIe PTM is enabled, some lockups could
be observed with some integrated i225-V models.
While the issue is investigated, we can disable crosstimestamp for
those models and see no loss of functionality, because those models
don't have any support for time synchronization.
Fixes: a90ec8483732 ("igc: Add support for PTP getcrosststamp()")
Link: https://lore.kernel.org/all/924175a188159f4e03bd69908a91e606b574139b.camel@gmx.de/
Reported-by: Stefan Dietrich <roots@gmx.de>
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Nechama Kraus <nechamax.kraus@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Dust Li says:
====================
net/smc: fix kernel panic caused by race of smc_sock
This patchset fixes the race between smc_release triggered by
close(2) and cdc_handle triggered by underlaying RDMA device.
The race is caused because the smc_connection may been released
before the pending tx CDC messages got its CQEs. In order to fix
this, I add a counter to track how many pending WRs we have posted
through the smc_connection, and only release the smc_connection
after there is no pending WRs on the connection.
The first patch prevents posting WR on a QP that is not in RTS
state. This patch is needed because if we post WR on a QP that
is not in RTS state, ib_post_send() may success but no CQE will
return, and that will confuse the counter tracking the pending
WRs.
The second patch add a counter to track how many WRs were posted
through the smc_connection, and don't reset the QP on link destroying
to prevent leak of the counter.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
A crash occurs when smc_cdc_tx_handler() tries to access smc_sock
but smc_release() has already freed it.
[ 4570.695099] BUG: unable to handle page fault for address: 000000002eae9e88
[ 4570.696048] #PF: supervisor write access in kernel mode
[ 4570.696728] #PF: error_code(0x0002) - not-present page
[ 4570.697401] PGD 0 P4D 0
[ 4570.697716] Oops: 0002 [#1] PREEMPT SMP NOPTI
[ 4570.698228] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.16.0-rc4+ #111
[ 4570.699013] Hardware name: Alibaba Cloud Alibaba Cloud ECS, BIOS 8c24b4c 04/0
[ 4570.699933] RIP: 0010:_raw_spin_lock+0x1a/0x30
<...>
[ 4570.711446] Call Trace:
[ 4570.711746] <IRQ>
[ 4570.711992] smc_cdc_tx_handler+0x41/0xc0
[ 4570.712470] smc_wr_tx_tasklet_fn+0x213/0x560
[ 4570.712981] ? smc_cdc_tx_dismisser+0x10/0x10
[ 4570.713489] tasklet_action_common.isra.17+0x66/0x140
[ 4570.714083] __do_softirq+0x123/0x2f4
[ 4570.714521] irq_exit_rcu+0xc4/0xf0
[ 4570.714934] common_interrupt+0xba/0xe0
Though smc_cdc_tx_handler() checked the existence of smc connection,
smc_release() may have already dismissed and released the smc socket
before smc_cdc_tx_handler() further visits it.
smc_cdc_tx_handler() |smc_release()
if (!conn) |
|
|smc_cdc_tx_dismiss_slots()
| smc_cdc_tx_dismisser()
|
|sock_put(&smc->sk) <- last sock_put,
| smc_sock freed
bh_lock_sock(&smc->sk) (panic) |
To make sure we won't receive any CDC messages after we free the
smc_sock, add a refcount on the smc_connection for inflight CDC
message(posted to the QP but haven't received related CQE), and
don't release the smc_connection until all the inflight CDC messages
haven been done, for both success or failed ones.
Using refcount on CDC messages brings another problem: when the link
is going to be destroyed, smcr_link_clear() will reset the QP, which
then remove all the pending CQEs related to the QP in the CQ. To make
sure all the CQEs will always come back so the refcount on the
smc_connection can always reach 0, smc_ib_modify_qp_reset() was replaced
by smc_ib_modify_qp_error().
And remove the timeout in smc_wr_tx_wait_no_pending_sends() since we
need to wait for all pending WQEs done, or we may encounter use-after-
free when handling CQEs.
For IB device removal routine, we need to wait for all the QPs on that
device been destroyed before we can destroy CQs on the device, or
the refcount on smc_connection won't reach 0 and smc_sock cannot be
released.
Fixes: 5f08318f617b ("smc: connection data control (CDC)")
Reported-by: Wen Gu <guwen@linux.alibaba.com>
Signed-off-by: Dust Li <dust.li@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We found smc_llc_send_link_delete_all() sometimes wait
for 2s timeout when testing with RDMA link up/down.
It is possible when a smc_link is in ACTIVATING state,
the underlaying QP is still in RESET or RTR state, which
cannot send any messages out.
smc_llc_send_link_delete_all() use smc_link_usable() to
checks whether the link is usable, if the QP is still in
RESET or RTR state, but the smc_link is in ACTIVATING, this
LLC message will always fail without any CQE entering the
CQ, and we will always wait 2s before timeout.
Since we cannot send any messages through the QP before
the QP enter RTS. I add a wrapper smc_link_sendable()
which checks the state of QP along with the link state.
And replace smc_link_usable() with smc_link_sendable()
in all LLC & CDC message sending routine.
Fixes: 5f08318f617b ("smc: connection data control (CDC)")
Signed-off-by: Dust Li <dust.li@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
'phy->pending_skb' is alloced when device probe, but forgot to free
in the error handling path and remove path, this cause memory leak
as follows:
unreferenced object 0xffff88800bc06800 (size 512):
comm "8", pid 11775, jiffies 4295159829 (age 9.032s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<00000000d66c09ce>] __kmalloc_node_track_caller+0x1ed/0x450
[<00000000c93382b3>] kmalloc_reserve+0x37/0xd0
[<000000005fea522c>] __alloc_skb+0x124/0x380
[<0000000019f29f9a>] st21nfca_hci_i2c_probe+0x170/0x8f2
Fix it by freeing 'pending_skb' in error and remove.
Fixes: 68957303f44a ("NFC: ST21NFCA: Add driver for STMicroelectronics ST21NFCA NFC Chip")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Received frames have FCS truncated. There is no need
to subtract FCS length from the statistics.
Fixes: fe1a56420cf2 ("net: lantiq: Add Lantiq / Intel VRX200 Ethernet driver")
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
'ndev' is a managed resource allocated with devm_alloc_etherdev(), so there
is no need to call free_netdev() explicitly or there will be a double
free().
Simplify all error handling paths accordingly.
Fixes: d51b6ce441d3 ("net: ethernet: add ag71xx driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As we build for mips, we meet following error. l1_init error with
multiple definition. Some architecture devices usually marked with
l1, l2, lxx as the start-up phase. so we change the mISDN function
names, align with Isdnl2_xxx.
mips-linux-gnu-ld: drivers/isdn/mISDN/layer1.o: in function `l1_init':
(.text+0x890): multiple definition of `l1_init'; \
arch/mips/kernel/bmips_5xxx_init.o:(.text+0xf0): first defined here
make[1]: *** [home/mips/kernel-build/linux/Makefile:1161: vmlinux] Error 1
Signed-off-by: wolfgang huang <huangjinhui@kylinos.cn>
Reported-by: k2ci <kernel-bot@kylinos.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fix from Ard Biesheuvel:
"Another EFI fix for v5.16:
- Prevent missing prototype warning from breaking the build under
CONFIG_WERROR=y"
* tag 'efi-urgent-for-v5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi: Move efifb_setup_from_dmi() prototype from arch headers
|
|
Clang static analysis reports this warning
hooks.c:5765:6: warning: 4th function call argument is an uninitialized
value
if (selinux_xfrm_postroute_last(sksec->sid, skb, &ad, proto))
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
selinux_parse_skb() can return ok without setting proto. The later call
to selinux_xfrm_postroute_last() does an early check of proto and can
return ok if the garbage proto value matches. So initialize proto.
Cc: stable@vger.kernel.org
Fixes: eef9b41622f2 ("selinux: cleanup selinux_xfrm_sock_rcv_skb() and selinux_xfrm_postroute_last()")
Signed-off-by: Tom Rix <trix@redhat.com>
[PM: typo/spelling and checkpatch.pl description fixes]
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Fix user-space builds if it includes /usr/include/linux/nfc.h before
some of other headers:
/usr/include/linux/nfc.h:281:9: error: unknown type name ‘size_t’
281 | size_t service_name_len;
| ^~~~~~
Fixes: d646960f7986 ("NFC: Initial LLCP support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Replace sa_family_t with __kernel_sa_family_t to fix the following
linux/nfc.h userspace compilation errors:
/usr/include/linux/nfc.h:266:2: error: unknown type name 'sa_family_t'
sa_family_t sa_family;
/usr/include/linux/nfc.h:274:2: error: unknown type name 'sa_family_t'
sa_family_t sa_family;
Fixes: 23b7869c0fd0 ("NFC: add the NFC socket raw protocol")
Fixes: d646960f7986 ("NFC: Initial LLCP support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The D-Link DSB-650TX (2001:4002) is unable to receive Ethernet frames
that are longer than 1518 octets, for example, Ethernet frames that
contain 802.1Q VLAN tags.
The frames are sent to the pegasus driver via USB but the driver
discards them because they have the Long_pkt field set to 1 in the
received status report. The function read_bulk_callback of the pegasus
driver treats such received "packets" (in the terminology of the
hardware) as errors but the field simply does just indicate that the
Ethernet frame (MAC destination to FCS) is longer than 1518 octets.
It seems that in the 1990s there was a distinction between
"giant" (> 1518) and "runt" (< 64) frames and the hardware includes
flags to indicate this distinction. It seems that the purpose of the
distinction "giant" frames was to not allow infinitely long frames due
to transmission errors and to allow hardware to have an upper limit of
the frame size. However, the hardware already has such limit with its
2048 octet receive buffer and, therefore, Long_pkt is merely a
convention and should not be treated as a receive error.
Actually, the hardware is even able to receive Ethernet frames with 2048
octets which exceeds the claimed limit frame size limit of the driver of
1536 octets (PEGASUS_MTU).
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Matthias-Christian Ott <ott@mirix.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The function obtain the next buffer without boundary check.
We should return with I/O error code.
The bug is found by fuzzing and the crash report is attached.
It is an OOB bug although reported as use-after-free.
[ 4.804724] BUG: KASAN: use-after-free in aq_ring_rx_clean+0x1e88/0x2730 [atlantic]
[ 4.805661] Read of size 4 at addr ffff888034fe93a8 by task ksoftirqd/0/9
[ 4.806505]
[ 4.806703] CPU: 0 PID: 9 Comm: ksoftirqd/0 Tainted: G W 5.6.0 #34
[ 4.809030] Call Trace:
[ 4.809343] dump_stack+0x76/0xa0
[ 4.809755] print_address_description.constprop.0+0x16/0x200
[ 4.810455] ? aq_ring_rx_clean+0x1e88/0x2730 [atlantic]
[ 4.811234] ? aq_ring_rx_clean+0x1e88/0x2730 [atlantic]
[ 4.813183] __kasan_report.cold+0x37/0x7c
[ 4.813715] ? aq_ring_rx_clean+0x1e88/0x2730 [atlantic]
[ 4.814393] kasan_report+0xe/0x20
[ 4.814837] aq_ring_rx_clean+0x1e88/0x2730 [atlantic]
[ 4.815499] ? hw_atl_b0_hw_ring_rx_receive+0x9a5/0xb90 [atlantic]
[ 4.816290] aq_vec_poll+0x179/0x5d0 [atlantic]
[ 4.816870] ? _GLOBAL__sub_I_65535_1_aq_pci_func_init+0x20/0x20 [atlantic]
[ 4.817746] ? __next_timer_interrupt+0xba/0xf0
[ 4.818322] net_rx_action+0x363/0xbd0
[ 4.818803] ? call_timer_fn+0x240/0x240
[ 4.819302] ? __switch_to_asm+0x40/0x70
[ 4.819809] ? napi_busy_loop+0x520/0x520
[ 4.820324] __do_softirq+0x18c/0x634
[ 4.820797] ? takeover_tasklets+0x5f0/0x5f0
[ 4.821343] run_ksoftirqd+0x15/0x20
[ 4.821804] smpboot_thread_fn+0x2f1/0x6b0
[ 4.822331] ? smpboot_unregister_percpu_thread+0x160/0x160
[ 4.823041] ? __kthread_parkme+0x80/0x100
[ 4.823571] ? smpboot_unregister_percpu_thread+0x160/0x160
[ 4.824301] kthread+0x2b5/0x3b0
[ 4.824723] ? kthread_create_on_node+0xd0/0xd0
[ 4.825304] ret_from_fork+0x35/0x40
Signed-off-by: Zekun Shen <bruceshenzk@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
$ cat /pro/net/udp
before:
sl local_address rem_address st tx_queue rx_queue tr tm->when
26050: 0100007F:0035 00000000:0000 07 00000000:00000000 00:00000000
26320: 0100007F:0143 00000000:0000 07 00000000:00000000 00:00000000
27135: 00000000:8472 00000000:0000 07 00000000:00000000 00:00000000
after:
sl local_address rem_address st tx_queue rx_queue tr tm->when
26050: 0100007F:0035 00000000:0000 07 00000000:00000000 00:00000000
26320: 0100007F:0143 00000000:0000 07 00000000:00000000 00:00000000
27135: 00000000:8472 00000000:0000 07 00000000:00000000 00:00000000
Signed-off-by: yangxingwu <xingwu.yang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In smc_wr_tx_send_wait() the completion on index specified by
pend->idx is initialized and after smc_wr_tx_send() was called the wait
for completion starts. pend->idx is used to get the correct index for
the wait, but the pend structure could already be cleared in
smc_wr_tx_process_cqe().
Introduce pnd_idx to hold and use a local copy of the correct index.
Fixes: 09c61d24f96d ("net/smc: wait for departure of an IB message")
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The "__ip6_tnl_parm" struct was left uninitialized causing an invalid
load of random data when the "__ip6_tnl_parm" struct was used elsewhere.
As an example, in the function "ip6_tnl_xmit_ctl()", it tries to access
the "collect_md" member. With "__ip6_tnl_parm" being uninitialized and
containing random data, the UBSAN detected that "collect_md" held a
non-boolean value.
The UBSAN issue is as follows:
===============================================================
UBSAN: invalid-load in net/ipv6/ip6_tunnel.c:1025:14
load of value 30 is not a valid value for type '_Bool'
CPU: 1 PID: 228 Comm: kworker/1:3 Not tainted 5.16.0-rc4+ #8
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
Workqueue: ipv6_addrconf addrconf_dad_work
Call Trace:
<TASK>
dump_stack_lvl+0x44/0x57
ubsan_epilogue+0x5/0x40
__ubsan_handle_load_invalid_value+0x66/0x70
? __cpuhp_setup_state+0x1d3/0x210
ip6_tnl_xmit_ctl.cold.52+0x2c/0x6f [ip6_tunnel]
vti6_tnl_xmit+0x79c/0x1e96 [ip6_vti]
? lock_is_held_type+0xd9/0x130
? vti6_rcv+0x100/0x100 [ip6_vti]
? lock_is_held_type+0xd9/0x130
? rcu_read_lock_bh_held+0xc0/0xc0
? lock_acquired+0x262/0xb10
dev_hard_start_xmit+0x1e6/0x820
__dev_queue_xmit+0x2079/0x3340
? mark_lock.part.52+0xf7/0x1050
? netdev_core_pick_tx+0x290/0x290
? kvm_clock_read+0x14/0x30
? kvm_sched_clock_read+0x5/0x10
? sched_clock_cpu+0x15/0x200
? find_held_lock+0x3a/0x1c0
? lock_release+0x42f/0xc90
? lock_downgrade+0x6b0/0x6b0
? mark_held_locks+0xb7/0x120
? neigh_connected_output+0x31f/0x470
? lockdep_hardirqs_on+0x79/0x100
? neigh_connected_output+0x31f/0x470
? ip6_finish_output2+0x9b0/0x1d90
? rcu_read_lock_bh_held+0x62/0xc0
? ip6_finish_output2+0x9b0/0x1d90
ip6_finish_output2+0x9b0/0x1d90
? ip6_append_data+0x330/0x330
? ip6_mtu+0x166/0x370
? __ip6_finish_output+0x1ad/0xfb0
? nf_hook_slow+0xa6/0x170
ip6_output+0x1fb/0x710
? nf_hook.constprop.32+0x317/0x430
? ip6_finish_output+0x180/0x180
? __ip6_finish_output+0xfb0/0xfb0
? lock_is_held_type+0xd9/0x130
ndisc_send_skb+0xb33/0x1590
? __sk_mem_raise_allocated+0x11cf/0x1560
? dst_output+0x4a0/0x4a0
? ndisc_send_rs+0x432/0x610
addrconf_dad_completed+0x30c/0xbb0
? addrconf_rs_timer+0x650/0x650
? addrconf_dad_work+0x73c/0x10e0
addrconf_dad_work+0x73c/0x10e0
? addrconf_dad_completed+0xbb0/0xbb0
? rcu_read_lock_sched_held+0xaf/0xe0
? rcu_read_lock_bh_held+0xc0/0xc0
process_one_work+0x97b/0x1740
? pwq_dec_nr_in_flight+0x270/0x270
worker_thread+0x87/0xbf0
? process_one_work+0x1740/0x1740
kthread+0x3ac/0x490
? set_kthread_struct+0x100/0x100
ret_from_fork+0x22/0x30
</TASK>
===============================================================
The solution is to initialize "__ip6_tnl_parm" struct to zeros in the
"vti6_siocdevprivate()" function.
Signed-off-by: William Zhao <wizhao@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Prevent potential undefined behavior due to shifting pkey constants
into the sign bit
- Move the EFI memory reservation code *after* the efi= cmdline parsing
has happened
- Revert two commits which turned out to be the wrong direction to
chase when accommodating early memblock reservations consolidation
and command line parameters parsing
* tag 'x86_urgent_for_v5.16_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/pkey: Fix undefined behaviour with PKRU_WD_BIT
x86/boot: Move EFI range reservation after cmdline parsing
Revert "x86/boot: Pull up cmdline preparation and early param parsing"
Revert "x86/boot: Mark prepare_command_line() __init"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixes from Borislav Petkov:
- Prevent clang from reordering the reachable annotation in
an inline asm statement without inputs
- Fix objtool builds on non-glibc systems due to undefined
__always_inline
* tag 'objtool_urgent_for_v5.16_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
compiler.h: Fix annotation macro misplacement with Clang
uapi: Fix undefined __always_inline on non-glibc systems
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"Some hopefully final pin control fixes for the v5.16 kernel:
- Fix an out-of-bounds bug in the Mediatek driver
- Fix an init order bug in the Broadcom BCM2835 driver
- Fix a GPIO offset bug in the STM32 driver"
* tag 'pinctrl-v5.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: stm32: consider the GPIO offset to expose all the GPIO lines
pinctrl: bcm2835: Change init order for gpio hogs
pinctrl: mediatek: fix global-out-of-bounds issue
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
"A couple of lm90 driver fixes. None of them are critical, but they
should nevertheless be fixed"
* tag 'hwmon-for-v5.16-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (lm90) Do not report 'busy' status bit as alarm
hwmom: (lm90) Fix citical alarm status for MAX6680/MAX6681
hwmon: (lm90) Drop critical attribute support for MAX6654
hwmon: (lm90) Prevent integer overflow/underflow in hysteresis calculations
hwmon: (lm90) Fix usage of CONFIG2 register in detect function
|
