summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-02-27net: phy: Restore phy_resume() locking assumptionAndrew Lunn
commit f5e64032a799 ("net: phy: fix resume handling") changes the locking semantics for phy_resume() such that the caller now needs to hold the phy mutex. Not all call sites were adopted to this new semantic, resulting in warnings from the added WARN_ON(!mutex_is_locked(&phydev->lock)). Rather than change the semantics, add a __phy_resume() and restore the old behavior of phy_resume(). Reported-by: Heiner Kallweit <hkallweit1@gmail.com> Fixes: f5e64032a799 ("net: phy: fix resume handling") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-27tipc: correct initial value for group congestion flagJon Maloy
In commit 60c253069632 ("tipc: fix race between poll() and setsockopt()") we introduced a pointer from struct tipc_group to the 'group_is_connected' flag in struct tipc_sock, so that this field can be checked without dereferencing the group pointer of the latter struct. The initial value for this flag is correctly set to 'false' when a group is created, but we miss the case when no group is created at all, in which case the initial value should be 'true'. This has the effect that SOCK_RDM/DGRAM sockets sending datagrams never receive POLLOUT if they request so. This commit corrects this bug. Fixes: 60c253069632 ("tipc: fix race between poll() and setsockopt()") Reported-by: Hoang Le <hoang.h.le@dektek.com.au> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-27devlink: Fix resource coverity errorsArkadi Sharshevsky
Fix resource coverity errors. Fixes: d9f9b9a4d05f ("devlink: Add support for resource abstraction") Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-27net: ipv4: don't allow setting net.ipv4.route.min_pmtu below 68Sabrina Dubroca
According to RFC 1191 sections 3 and 4, ICMP frag-needed messages indicating an MTU below 68 should be rejected: A host MUST never reduce its estimate of the Path MTU below 68 octets. and (talking about ICMP frag-needed's Next-Hop MTU field): This field will never contain a value less than 68, since every router "must be able to forward a datagram of 68 octets without fragmentation". Furthermore, by letting net.ipv4.route.min_pmtu be set to negative values, we can end up with a very large PMTU when (-1) is cast into u32. Let's also make ip_rt_min_pmtu a u32, since it's only ever compared to unsigned ints. Reported-by: Jianlin Shi <jishi@redhat.com> Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-27Merge branch 'for-upstream' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth Johan Hedberg says: ==================== pull request: bluetooth 2018-02-26 Here are a two Bluetooth driver fixes for the 4.16 kernel. Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-27devlink: Compare to size_new in case of resource child validationArkadi Sharshevsky
The current implementation checks the combined size of the children with the 'size' of the parent. The correct behavior is to check the combined size vs the pending change and to compare vs the 'size_new'. Fixes: d9f9b9a4d05f ("devlink: Add support for resource abstraction") Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Tested-by: Yuval Mintz <yuvalm@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-26r8152: fix tx packets accountingEric Dumazet
r8152 driver handles TSO packets (limited to ~16KB) quite well, but pretends each TSO logical packet is a single packet on the wire. There is also some error since headers are accounted once, but error rate is small enough that we do not care. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-26ip_tunnel: Do not use mark in skb by defaultThomas Winter
This reverts commit 5c38bd1b82e1f76f9fa96c1e61c9897cabf1ce45. skb->mark contains the mark the encapsulated traffic which can result in incorrect routing decisions being made such as routing loops if the route chosen is via tunnel itself. The correct method should be to use tunnel->fwmark. Signed-off-by: Thomas Winter <thomas.winter@alliedtelesis.co.nz> Cc: "David S. Miller" <davem@davemloft.net> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-26bridge: Fix VLAN reference count problemIdo Schimmel
When a VLAN is added on a port, a reference is taken on the corresponding master VLAN entry. If it does not already exist, then it is created and a reference taken. However, in the second case a reference is not really taken when CONFIG_REFCOUNT_FULL is enabled as refcount_inc() is replaced by refcount_inc_not_zero(). Fix this by using refcount_set() on a newly created master VLAN entry. Fixes: 251277598596 ("net, bridge: convert net_bridge_vlan.refcnt from atomic_t to refcount_t") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-26DT: net: renesas,ravb: document R8A77980 bindingsSergei Shtylyov
Renesas R-Car V3H (R8A77980) SoC has the R-Car gen3 compatible EtherAVB device, so document the SoC specific bindings. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-26qrtr: add MODULE_ALIAS macro to smdRamon Fried
Added MODULE_ALIAS("rpmsg:IPCRTR") to ensure qrtr-smd and qrtr will load when IPCRTR channel is detected. Signed-off-by: Ramon Fried <rfried@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-26hdlc_ppp: carrier detect ok, don't turn off negotiationDenis Du
Sometimes when physical lines have a just good noise to make the protocol handshaking fail, but the carrier detect still good. Then after remove of the noise, nobody will trigger this protocol to be start again to cause the link to never come back. The fix is when the carrier is still on, not terminate the protocol handshaking. Signed-off-by: Denis Du <dudenis2000@yahoo.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-26tuntap: correctly add the missing XDP flushJason Wang
We don't flush batched XDP packets through xdp_do_flush_map(), this will cause packets stall at TX queue. Consider we don't do XDP on NAPI poll(), the only possible fix is to call xdp_do_flush_map() immediately after xdp_do_redirect(). Note, this in fact won't try to batch packets through devmap, we could address in the future. Reported-by: Christoffer Dall <christoffer.dall@linaro.org> Fixes: 761876c857cb ("tap: XDP support") Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-26tuntap: disable preemption during XDP processingJason Wang
Except for tuntap, all other drivers' XDP was implemented at NAPI poll() routine in a bh. This guarantees all XDP operation were done at the same CPU which is required by e.g BFP_MAP_TYPE_PERCPU_ARRAY. But for tuntap, we do it in process context and we try to protect XDP processing by RCU reader lock. This is insufficient since CONFIG_PREEMPT_RCU can preempt the RCU reader critical section which breaks the assumption that all XDP were processed in the same CPU. Fixing this by simply disabling preemption during XDP processing. Fixes: 761876c857cb ("tap: XDP support") Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-26Revert "tuntap: add missing xdp flush"Jason Wang
This reverts commit 762c330d670e3d4b795cf7a8d761866fdd1eef49. The reason is we try to batch packets for devmap which causes calling xdp_do_flush() in the process context. Simply disabling preemption may not work since process may move among processors which lead xdp_do_flush() to miss some flushes on some processors. So simply revert the patch, a follow-up patch will add the xdp flush correctly. Reported-by: Christoffer Dall <christoffer.dall@linaro.org> Fixes: 762c330d670e ("tuntap: add missing xdp flush") Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-26ixgbe: fix crash in build_skb Rx code pathEmil Tantilov
Add check for build_skb enabled ring in ixgbe_dma_sync_frag(). In that case &skb_shinfo(skb)->frags[0] may not always be set which can lead to a crash. Instead we derive the page offset from skb->data. Fixes: 42073d91a214 ("ixgbe: Have the CPU take ownership of the buffers sooner") CC: stable <stable@vger.kernel.org> Reported-by: Ambarish Soman <asoman@redhat.com> Suggested-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-26ARM: orion5x: Revert commit 4904dbda41c8.David S. Miller
It is not valid for orion5x to use mac_pton(). First of all, the orion5x buffer is not NULL terminated. mac_pton() has no business operating on non-NULL terminated buffers because only the caller can know that this is valid and in what manner it is ok to parse this NULL'less buffer. Second of all, orion5x operates on an __iomem pointer, which cannot be dereferenced using normal C pointer operations. Accesses to such areas much be performed with the proper iomem accessors. Fixes: 4904dbda41c8 ("ARM: orion5x: use mac_pton() helper") Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-26Merge branch 'l2tp-fix-API-races-discovered-by-syzbot'David S. Miller
James Chapman says: ==================== l2tp: fix API races discovered by syzbot This patch series addresses several races with L2TP APIs discovered by syzbot. There are no functional changes. The set of patches 1-5 in combination fix the following syzbot reports. 19c09769f WARNING in debug_print_object 347bd5acd KASAN: use-after-free Read in inet_shutdown 6e6a5ec8d general protection fault in pppol2tp_connect 9df43faf0 KASAN: use-after-free Read in pppol2tp_connect My first attempts to fix these issues were as net-next patches but the series included other refactoring and cleanup work. I was asked to separate out the bugfixes and redo for the net tree, which is what these patches are. The changes are: 1. Fix inet_shutdown races when L2TP tunnels and sessions close. (patches 1-2) 2. Fix races with tunnel and its socket. (patch 3) 3. Fix race in pppol2tp_release with session and its socket. (patch 4) 4. Fix tunnel lookup use-after-free. (patch 5) All of the syzbot reproducers hit races in the tunnel and pppol2tp session create and destroy paths. These tests create and destroy pppol2tp tunnels and sessions rapidly using multiple threads, provoking races in several tunnel/session create/destroy paths. The key problem was that each tunnel/session socket could be destroyed while its associated tunnel/session object still existed (patches 3, 4). Patch 5 addresses a problem with the way tunnels are removed from the tunnel list. Patch 5 is tagged that it addresses all four syzbot issues, though all 5 patches are needed. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-26l2tp: fix tunnel lookup use-after-free raceJames Chapman
l2tp_tunnel_get walks the tunnel list to find a matching tunnel instance and if a match is found, its refcount is increased before returning the tunnel pointer. But when tunnel objects are destroyed, they are on the tunnel list after their refcount hits zero. Fix this by moving the code that removes the tunnel from the tunnel list from the tunnel socket destructor into in the l2tp_tunnel_delete path, before the tunnel refcount is decremented. refcount_t: increment on 0; use-after-free. WARNING: CPU: 3 PID: 13507 at lib/refcount.c:153 refcount_inc+0x47/0x50 Modules linked in: CPU: 3 PID: 13507 Comm: syzbot_6e6a5ec8 Not tainted 4.16.0-rc2+ #36 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 RIP: 0010:refcount_inc+0x47/0x50 RSP: 0018:ffff8800136ffb20 EFLAGS: 00010286 RAX: dffffc0000000008 RBX: ffff880017068e68 RCX: ffffffff814d3333 RDX: 0000000000000000 RSI: ffff88001a59f6d8 RDI: ffff88001a59f6d8 RBP: ffff8800136ffb28 R08: 0000000000000000 R09: 0000000000000000 R10: ffff8800136ffab0 R11: 0000000000000000 R12: ffff880017068e50 R13: 0000000000000000 R14: ffff8800174da800 R15: 0000000000000004 FS: 00007f403ab1e700(0000) GS:ffff88001a580000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000205fafd2 CR3: 0000000016770000 CR4: 00000000000006e0 Call Trace: l2tp_tunnel_get+0x2dd/0x4e0 pppol2tp_connect+0x428/0x13c0 ? pppol2tp_session_create+0x170/0x170 ? __might_fault+0x115/0x1d0 ? lock_downgrade+0x860/0x860 ? __might_fault+0xe5/0x1d0 ? security_socket_connect+0x8e/0xc0 SYSC_connect+0x1b6/0x310 ? SYSC_bind+0x280/0x280 ? __do_page_fault+0x5d1/0xca0 ? up_read+0x1f/0x40 ? __do_page_fault+0x3c8/0xca0 SyS_connect+0x29/0x30 ? SyS_accept+0x40/0x40 do_syscall_64+0x1e0/0x730 ? trace_hardirqs_off_thunk+0x1a/0x1c entry_SYSCALL_64_after_hwframe+0x42/0xb7 RIP: 0033:0x7f403a42f259 RSP: 002b:00007f403ab1dee8 EFLAGS: 00000296 ORIG_RAX: 000000000000002a RAX: ffffffffffffffda RBX: 00000000205fafe4 RCX: 00007f403a42f259 RDX: 000000000000002e RSI: 00000000205fafd2 RDI: 0000000000000004 RBP: 00007f403ab1df20 R08: 00007f403ab1e700 R09: 0000000000000000 R10: 00007f403ab1e700 R11: 0000000000000296 R12: 0000000000000000 R13: 00007ffc81906cbf R14: 0000000000000000 R15: 00007f403ab2b040 Code: 3b ff 5b 5d c3 e8 ca 5f 3b ff 80 3d 49 8e 66 04 00 75 ea e8 bc 5f 3b ff 48 c7 c7 60 69 64 85 c6 05 34 8e 66 04 01 e8 59 49 15 ff <0f> 0b eb ce 0f 1f 44 00 00 55 48 89 e5 41 56 41 55 41 54 53 49 Fixes: f8ccac0e44934 ("l2tp: put tunnel socket release on a workqueue") Reported-and-tested-by: syzbot+19c09769f14b48810113@syzkaller.appspotmail.com Reported-and-tested-by: syzbot+347bd5acde002e353a36@syzkaller.appspotmail.com Reported-and-tested-by: syzbot+6e6a5ec8de31a94cd015@syzkaller.appspotmail.com Reported-and-tested-by: syzbot+9df43faf09bd400f2993@syzkaller.appspotmail.com Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-26l2tp: fix race in pppol2tp_release with session object destroyJames Chapman
pppol2tp_release uses call_rcu to put the final ref on its socket. But the session object doesn't hold a ref on the session socket so may be freed while the pppol2tp_put_sk RCU callback is scheduled. Fix this by having the session hold a ref on its socket until the session is destroyed. It is this ref that is dropped via call_rcu. Sessions are also deleted via l2tp_tunnel_closeall. This must now also put the final ref via call_rcu. So move the call_rcu call site into pppol2tp_session_close so that this happens in both destroy paths. A common destroy path should really be implemented, perhaps with l2tp_tunnel_closeall calling l2tp_session_delete like pppol2tp_release does, but this will be looked at later. ODEBUG: activate active (active state 1) object type: rcu_head hint: (null) WARNING: CPU: 3 PID: 13407 at lib/debugobjects.c:291 debug_print_object+0x166/0x220 Modules linked in: CPU: 3 PID: 13407 Comm: syzbot_19c09769 Not tainted 4.16.0-rc2+ #38 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 RIP: 0010:debug_print_object+0x166/0x220 RSP: 0018:ffff880013647a00 EFLAGS: 00010082 RAX: dffffc0000000008 RBX: 0000000000000003 RCX: ffffffff814d3333 RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff88001a59f6d0 RBP: ffff880013647a40 R08: 0000000000000000 R09: 0000000000000001 R10: ffff8800136479a8 R11: 0000000000000000 R12: 0000000000000001 R13: ffffffff86161420 R14: ffffffff85648b60 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88001a580000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020e77000 CR3: 0000000006022000 CR4: 00000000000006e0 Call Trace: debug_object_activate+0x38b/0x530 ? debug_object_assert_init+0x3b0/0x3b0 ? __mutex_unlock_slowpath+0x85/0x8b0 ? pppol2tp_session_destruct+0x110/0x110 __call_rcu.constprop.66+0x39/0x890 ? __call_rcu.constprop.66+0x39/0x890 call_rcu_sched+0x17/0x20 pppol2tp_release+0x2c7/0x440 ? fcntl_setlk+0xca0/0xca0 ? sock_alloc_file+0x340/0x340 sock_release+0x92/0x1e0 sock_close+0x1b/0x20 __fput+0x296/0x6e0 ____fput+0x1a/0x20 task_work_run+0x127/0x1a0 do_exit+0x7f9/0x2ce0 ? SYSC_connect+0x212/0x310 ? mm_update_next_owner+0x690/0x690 ? up_read+0x1f/0x40 ? __do_page_fault+0x3c8/0xca0 do_group_exit+0x10d/0x330 ? do_group_exit+0x330/0x330 SyS_exit_group+0x22/0x30 do_syscall_64+0x1e0/0x730 ? trace_hardirqs_off_thunk+0x1a/0x1c entry_SYSCALL_64_after_hwframe+0x42/0xb7 RIP: 0033:0x7f362e471259 RSP: 002b:00007ffe389abe08 EFLAGS: 00000202 ORIG_RAX: 00000000000000e7 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f362e471259 RDX: 00007f362e471259 RSI: 000000000000002e RDI: 0000000000000000 RBP: 00007ffe389abe30 R08: 0000000000000000 R09: 00007f362e944270 R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000400b60 R13: 00007ffe389abf50 R14: 0000000000000000 R15: 0000000000000000 Code: 8d 3c dd a0 8f 64 85 48 89 fa 48 c1 ea 03 80 3c 02 00 75 7b 48 8b 14 dd a0 8f 64 85 4c 89 f6 48 c7 c7 20 85 64 85 e 8 2a 55 14 ff <0f> 0b 83 05 ad 2a 68 04 01 48 83 c4 18 5b 41 5c 41 5d 41 5e 41 Fixes: ee40fb2e1eb5b ("l2tp: protect sock pointer of struct pppol2tp_session with RCU") Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-26l2tp: fix races with tunnel socket closeJames Chapman
The tunnel socket tunnel->sock (struct sock) is accessed when preparing a new ppp session on a tunnel at pppol2tp_session_init. If the socket is closed by a thread while another is creating a new session, the threads race. In pppol2tp_connect, the tunnel object may be created if the pppol2tp socket is associated with the special session_id 0 and the tunnel socket is looked up using the provided fd. When handling this, pppol2tp_connect cannot sock_hold the tunnel socket to prevent it being destroyed during pppol2tp_connect since this may itself may race with the socket being destroyed. Doing sockfd_lookup in pppol2tp_connect isn't sufficient to prevent tunnel->sock going away either because a given tunnel socket fd may be reused between calls to pppol2tp_connect. Instead, have l2tp_tunnel_create sock_hold the tunnel socket before it does sockfd_put. This ensures that the tunnel's socket is always extant while the tunnel object exists. Hold a ref on the socket until the tunnel is destroyed and ensure that all tunnel destroy paths go through a common function (l2tp_tunnel_delete) since this will do the final sock_put to release the tunnel socket. Since the tunnel's socket is now guaranteed to exist if the tunnel exists, we no longer need to use sockfd_lookup via l2tp_sock_to_tunnel to derive the tunnel from the socket since this is always sk_user_data. Also, sessions no longer sock_hold the tunnel socket since sessions already hold a tunnel ref and the tunnel sock will not be freed until the tunnel is freed. Removing these sock_holds in l2tp_session_register avoids a possible sock leak in the pppol2tp_connect error path if l2tp_session_register succeeds but attaching a ppp channel fails. The pppol2tp_connect error path could have been fixed instead and have the sock ref dropped when the session is freed, but doing a sock_put of the tunnel socket when the session is freed would require a new session_free callback. It is simpler to just remove the sock_hold of the tunnel socket in l2tp_session_register, now that the tunnel socket lifetime is guaranteed. Finally, some init code in l2tp_tunnel_create is reordered to ensure that the new tunnel object's refcount is set and the tunnel socket ref is taken before the tunnel socket destructor callbacks are set. kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN Modules linked in: CPU: 0 PID: 4360 Comm: syzbot_19c09769 Not tainted 4.16.0-rc2+ #34 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 RIP: 0010:pppol2tp_session_init+0x1d6/0x500 RSP: 0018:ffff88001377fb40 EFLAGS: 00010212 RAX: dffffc0000000000 RBX: ffff88001636a940 RCX: ffffffff84836c1d RDX: 0000000000000045 RSI: 0000000055976744 RDI: 0000000000000228 RBP: ffff88001377fb60 R08: ffffffff84836bc8 R09: 0000000000000002 R10: ffff88001377fab8 R11: 0000000000000001 R12: 0000000000000000 R13: ffff88001636aac8 R14: ffff8800160f81c0 R15: 1ffff100026eff76 FS: 00007ffb3ea66700(0000) GS:ffff88001a400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020e77000 CR3: 0000000016261000 CR4: 00000000000006f0 Call Trace: pppol2tp_connect+0xd18/0x13c0 ? pppol2tp_session_create+0x170/0x170 ? __might_fault+0x115/0x1d0 ? lock_downgrade+0x860/0x860 ? __might_fault+0xe5/0x1d0 ? security_socket_connect+0x8e/0xc0 SYSC_connect+0x1b6/0x310 ? SYSC_bind+0x280/0x280 ? __do_page_fault+0x5d1/0xca0 ? up_read+0x1f/0x40 ? __do_page_fault+0x3c8/0xca0 SyS_connect+0x29/0x30 ? SyS_accept+0x40/0x40 do_syscall_64+0x1e0/0x730 ? trace_hardirqs_off_thunk+0x1a/0x1c entry_SYSCALL_64_after_hwframe+0x42/0xb7 RIP: 0033:0x7ffb3e376259 RSP: 002b:00007ffeda4f6508 EFLAGS: 00000202 ORIG_RAX: 000000000000002a RAX: ffffffffffffffda RBX: 0000000020e77012 RCX: 00007ffb3e376259 RDX: 000000000000002e RSI: 0000000020e77000 RDI: 0000000000000004 RBP: 00007ffeda4f6540 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000400b60 R13: 00007ffeda4f6660 R14: 0000000000000000 R15: 0000000000000000 Code: 80 3d b0 ff 06 02 00 0f 84 07 02 00 00 e8 13 d6 db fc 49 8d bc 24 28 02 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 f a 48 c1 ea 03 <80> 3c 02 00 0f 85 ed 02 00 00 4d 8b a4 24 28 02 00 00 e8 13 16 Fixes: 80d84ef3ff1dd ("l2tp: prevent l2tp_tunnel_delete racing with userspace close") Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-26l2tp: don't use inet_shutdown on ppp session destroyJames Chapman
Previously, if a ppp session was closed, we called inet_shutdown to mark the socket as unconnected such that userspace would get errors and then close the socket. This could race with userspace closing the socket. Instead, leave userspace to close the socket in its own time (our session will be detached anyway). BUG: KASAN: use-after-free in inet_shutdown+0x5d/0x1c0 Read of size 4 at addr ffff880010ea3ac0 by task syzbot_347bd5ac/8296 CPU: 3 PID: 8296 Comm: syzbot_347bd5ac Not tainted 4.16.0-rc1+ #91 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 Call Trace: dump_stack+0x101/0x157 ? inet_shutdown+0x5d/0x1c0 print_address_description+0x78/0x260 ? inet_shutdown+0x5d/0x1c0 kasan_report+0x240/0x360 __asan_load4+0x78/0x80 inet_shutdown+0x5d/0x1c0 ? pppol2tp_show+0x80/0x80 pppol2tp_session_close+0x68/0xb0 l2tp_tunnel_closeall+0x199/0x210 ? udp_v6_flush_pending_frames+0x90/0x90 l2tp_udp_encap_destroy+0x6b/0xc0 ? l2tp_tunnel_del_work+0x2e0/0x2e0 udpv6_destroy_sock+0x8c/0x90 sk_common_release+0x47/0x190 udp_lib_close+0x15/0x20 inet_release+0x85/0xd0 inet6_release+0x43/0x60 sock_release+0x53/0x100 ? sock_alloc_file+0x260/0x260 sock_close+0x1b/0x20 __fput+0x19f/0x380 ____fput+0x1a/0x20 task_work_run+0xd2/0x110 exit_to_usermode_loop+0x18d/0x190 do_syscall_64+0x389/0x3b0 entry_SYSCALL_64_after_hwframe+0x26/0x9b RIP: 0033:0x7fe240a45259 RSP: 002b:00007fe241132df8 EFLAGS: 00000297 ORIG_RAX: 0000000000000003 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 00007fe240a45259 RDX: 00007fe240a45259 RSI: 0000000000000000 RDI: 00000000000000a5 RBP: 00007fe241132e20 R08: 00007fe241133700 R09: 0000000000000000 R10: 00007fe241133700 R11: 0000000000000297 R12: 0000000000000000 R13: 00007ffc49aff84f R14: 0000000000000000 R15: 00007fe241141040 Allocated by task 8331: save_stack+0x43/0xd0 kasan_kmalloc+0xad/0xe0 kasan_slab_alloc+0x12/0x20 kmem_cache_alloc+0x144/0x3e0 sock_alloc_inode+0x22/0x130 alloc_inode+0x3d/0xf0 new_inode_pseudo+0x1c/0x90 sock_alloc+0x30/0x110 __sock_create+0xaa/0x4c0 SyS_socket+0xbe/0x130 do_syscall_64+0x128/0x3b0 entry_SYSCALL_64_after_hwframe+0x26/0x9b Freed by task 8314: save_stack+0x43/0xd0 __kasan_slab_free+0x11a/0x170 kasan_slab_free+0xe/0x10 kmem_cache_free+0x88/0x2b0 sock_destroy_inode+0x49/0x50 destroy_inode+0x77/0xb0 evict+0x285/0x340 iput+0x429/0x530 dentry_unlink_inode+0x28c/0x2c0 __dentry_kill+0x1e3/0x2f0 dput.part.21+0x500/0x560 dput+0x24/0x30 __fput+0x2aa/0x380 ____fput+0x1a/0x20 task_work_run+0xd2/0x110 exit_to_usermode_loop+0x18d/0x190 do_syscall_64+0x389/0x3b0 entry_SYSCALL_64_after_hwframe+0x26/0x9b Fixes: fd558d186df2c ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts") Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-26l2tp: don't use inet_shutdown on tunnel destroyJames Chapman
Previously, if a tunnel was closed, we called inet_shutdown to mark the socket as unconnected such that userspace would get errors and then close the socket. This could race with userspace closing the socket. Instead, leave userspace to close the socket in its own time (our tunnel will be detached anyway). BUG: unable to handle kernel NULL pointer dereference at 00000000000000a0 IP: __lock_acquire+0x263/0x1630 PGD 0 P4D 0 Oops: 0000 [#1] SMP KASAN Modules linked in: CPU: 2 PID: 42 Comm: kworker/u8:2 Not tainted 4.15.0-rc7+ #129 Workqueue: l2tp l2tp_tunnel_del_work RIP: 0010:__lock_acquire+0x263/0x1630 RSP: 0018:ffff88001a37fc70 EFLAGS: 00010002 RAX: 0000000000000001 RBX: 0000000000000088 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffff88001a37fd18 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 00000000000076fd R12: 00000000000000a0 R13: ffff88001a3722c0 R14: 0000000000000001 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88001ad00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000a0 CR3: 000000001730b000 CR4: 00000000000006e0 Call Trace: ? __lock_acquire+0xc77/0x1630 ? console_trylock+0x11/0xa0 lock_acquire+0x117/0x230 ? lock_sock_nested+0x3a/0xa0 _raw_spin_lock_bh+0x3a/0x50 ? lock_sock_nested+0x3a/0xa0 lock_sock_nested+0x3a/0xa0 inet_shutdown+0x33/0xf0 l2tp_tunnel_del_work+0x60/0xef process_one_work+0x1ea/0x5f0 ? process_one_work+0x162/0x5f0 worker_thread+0x48/0x3e0 ? trace_hardirqs_on+0xd/0x10 kthread+0x108/0x140 ? process_one_work+0x5f0/0x5f0 ? kthread_stop+0x2a0/0x2a0 ret_from_fork+0x24/0x30 Code: 00 41 81 ff ff 1f 00 00 0f 87 7a 13 00 00 45 85 f6 49 8b 85 68 08 00 00 0f 84 ae 03 00 00 c7 44 24 18 00 00 00 00 e9 f0 00 00 00 <49> 81 3c 24 80 93 3f 83 b8 00 00 00 00 44 0f 44 c0 83 fe 01 0f RIP: __lock_acquire+0x263/0x1630 RSP: ffff88001a37fc70 CR2: 00000000000000a0 Fixes: 309795f4bec2d ("l2tp: Add netlink control API for L2TP") Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-25Bluetooth: hci_bcm: Make shutdown and device wake GPIO optionalStefan Wahren
According to the devicetree binding the shutdown and device wake GPIOs are optional. Since commit 3e81a4ca51a1 ("Bluetooth: hci_bcm: Mandate presence of shutdown and device wake GPIO") this driver won't probe anymore on Raspberry Pi 3 and Zero W (no device wake GPIO connected). So fix this regression by reverting this commit partially. Fixes: 3e81a4ca51a1 ("Bluetooth: hci_bcm: Mandate presence of shutdown and device wake GPIO") Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-02-25Bluetooth: btusb: Use DMI matching for QCA reset_resume quirkingHans de Goede
Commit 61f5acea8737 ("Bluetooth: btusb: Restore QCA Rome suspend/resume fix with a "rewritten" version") applied the USB_QUIRK_RESET_RESUME to all QCA USB Bluetooth modules. But it turns out that the resume problems are not caused by the QCA Rome chipset, on most platforms it resumes fine. The resume problems are actually a platform problem (likely the platform cutting all power when suspended). The USB_QUIRK_RESET_RESUME quirk also disables runtime suspend, so by matching on usb-ids, we're causing all boards with these chips to use extra power, to fix resume problems which only happen on some boards. This commit fixes this by applying the quirk based on DMI matching instead of on usb-ids, so that we match the platform and not the chipset. Here is the /sys/kernel/debug/usb/devices for the Bluetooth module: T: Bus=01 Lev=01 Prnt=01 Port=07 Cnt=04 Dev#= 5 Spd=12 MxCh= 0 D: Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0cf3 ProdID=e300 Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1514836 Fixes: 61f5acea8737 ("Bluetooth: btusb: Restore QCA Rome suspend/resume..") Cc: stable@vger.kernel.org Cc: Brian Norris <briannorris@chromium.org> Cc: Kai-Heng Feng <kai.heng.feng@canonical.com> Reported-and-tested-by: Kevin Fenzi <kevin@scrye.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2018-02-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix TTL offset calculation in mac80211 mesh code, from Peter Oh. 2) Fix races with procfs in ipt_CLUSTERIP, from Cong Wang. 3) Memory leak fix in lpm_trie BPF map code, from Yonghong Song. 4) Need to use GFP_ATOMIC in BPF cpumap allocations, from Jason Wang. 5) Fix potential deadlocks in netfilter getsockopt() code paths, from Paolo Abeni. 6) Netfilter stackpointer size checks really are needed to validate user input, from Florian Westphal. 7) Missing timer init in x_tables, from Paolo Abeni. 8) Don't use WQ_MEM_RECLAIM in mac80211 hwsim, from Johannes Berg. 9) When an ibmvnic device is brought down then back up again, it can be sent queue entries from a previous session, handle this properly instead of crashing. From Thomas Falcon. 10) Fix TCP checksum on LRO buffers in mlx5e, from Gal Pressman. 11) When we are dumping filters in cls_api, the output SKB is empty, and the filter we are dumping is too large for the space in the SKB, we should return -EMSGSIZE like other netlink dump operations do. Otherwise userland has no signal that is needs to increase the size of its read buffer. From Roman Kapl. 12) Several XDP fixes for virtio_net, from Jesper Dangaard Brouer. 13) Module refcount leak in netlink when a dump start fails, from Jason Donenfeld. 14) Handle sub-optimal GSO sizes better in TCP BBR congestion control, from Eric Dumazet. 15) Releasing bpf per-cpu arraymaps can take a long time, add a condtional scheduling point. From Eric Dumazet. 16) Implement retpolines for tail calls in x64 and arm64 bpf JITs. From Daniel Borkmann. 17) Fix page leak in gianfar driver, from Andy Spencer. 18) Missed clearing of estimator scratch buffer, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (76 commits) net_sched: gen_estimator: fix broken estimators based on percpu stats gianfar: simplify FCS handling and fix memory leak ipv6 sit: work around bogus gcc-8 -Wrestrict warning macvlan: fix use-after-free in macvlan_common_newlink() bpf, arm64: fix out of bounds access in tail call bpf, x64: implement retpoline for tail call rxrpc: Fix send in rxrpc_send_data_packet() net: aquantia: Fix error handling in aq_pci_probe() bpf: fix rcu lockdep warning for lpm_trie map_free callback bpf: add schedule points in percpu arrays management regulatory: add NUL to request alpha2 ibmvnic: Fix early release of login buffer net/smc9194: Remove bogus CONFIG_MAC reference net: ipv4: Set addr_type in hash_keys for forwarded case tcp_bbr: better deal with suboptimal GSO smsc75xx: fix smsc75xx_set_features() netlink: put module reference if dump start fails selftests/bpf/test_maps: exit child process without error in ENOMEM case selftests/bpf: update gitignore with test_libbpf_open selftests/bpf: tcpbpf_kern: use in6_* macros from glibc ..
2018-02-23Merge branch 'fixes-v4.16-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull security subsystem fixes from James Morris: - keys fixes via David Howells: "A collection of fixes for Linux keyrings, mostly thanks to Eric Biggers: - Fix some PKCS#7 verification issues. - Fix handling of unsupported crypto in X.509. - Fix too-large allocation in big_key" - Seccomp updates via Kees Cook: "These are fixes for the get_metadata interface that landed during -rc1. While the new selftest is strictly not a bug fix, I think it's in the same spirit of avoiding bugs" - an IMA build fix from Randy Dunlap * 'fixes-v4.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: integrity/security: fix digsig.c build error with header file KEYS: Use individual pages in big_key for crypto buffers X.509: fix NULL dereference when restricting key with unsupported_sig X.509: fix BUG_ON() when hash algorithm is unsupported PKCS#7: fix direct verification of SignerInfo signature PKCS#7: fix certificate blacklisting PKCS#7: fix certificate chain verification seccomp: add a selftest for get_metadata ptrace, seccomp: tweak get_metadata behavior slightly seccomp, ptrace: switch get_metadata types to arch independent
2018-02-23Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Catalin Marinas: "arm64 and perf fixes: - build error when accessing MPIDR_HWID_BITMASK from .S - fix CTR_EL0 field definitions - remove/disable some kernel messages on user faults (unhandled signals, unimplemented syscalls) - fix kernel page fault in unwind_frame() with function graph tracing - fix perf sleeping while atomic errors when booting with ACPI" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: fix unwind_frame() for filtered out fn for function graph tracing arm64: Enforce BBM for huge IO/VMAP mappings arm64: perf: correct PMUVer probing arm_pmu: acpi: request IRQs up-front arm_pmu: note IRQs and PMUs per-cpu arm_pmu: explicitly enable/disable SPIs at hotplug arm_pmu: acpi: check for mismatched PPIs arm_pmu: add armpmu_alloc_atomic() arm_pmu: fold platform helpers into platform code arm_pmu: kill arm_pmu_platdata ARM: ux500: remove PMU IRQ bouncer arm64: __show_regs: Only resolve kernel symbols when running at EL1 arm64: Remove unimplemented syscall log message arm64: Disable unhandled signal log messages by default arm64: cpufeature: Fix CTR_EL0 field definitions arm64: uaccess: Formalise types for access_ok() arm64: Fix compilation error while accessing MPIDR_HWID_BITMASK from .S files
2018-02-23Merge tag 'mips_fixes_4.16_3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips Pull MIPS fix from James Hogan: "A single MIPS fix for mismatching struct compat_flock, resulting in bus errors starting Firefox on Debian 8 since 4.13" * tag 'mips_fixes_4.16_3' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips: MIPS: Drop spurious __unused in struct compat_flock
2018-02-23Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk Pull printk fixlet from Petr Mladek: "People expect to see the real pointer value for %px. Let's substitute '(null)' only for the other %p? format modifiers that need to deference the pointer" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk: vsprintf: avoid misleading "(null)" for %px
2018-02-23Merge branch 'i2c/for-current' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "Two bugfixes, one v4.16 regression fix, and two documentation fixes" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: designware: Consider SCL GPIO optional i2c: busses: i2c-sirf: Fix spelling: "formular" -> "formula". i2c: bcm2835: Set up the rising/falling edge delays i2c: i801: Add missing documentation entries for Braswell and Kaby Lake i2c: designware: must wait for enable
2018-02-23Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "These are mostly fixes for problems with merge window code. In addition we have one doc update (alua) and two dead code removals (aiclib and octogon) a spurious assignment removal (csiostor) and a performance improvement for storvsc involving better interrupt spreading and increasing the command per lun handling" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: qla4xxx: skip error recovery in case of register disconnect. scsi: aacraid: fix shutdown crash when init fails scsi: qedi: Cleanup local str variable scsi: qedi: Fix truncation of CHAP name and secret scsi: qla2xxx: Fix incorrect handle for abort IOCB scsi: qla2xxx: Fix double free bug after firmware timeout scsi: storvsc: Increase cmd_per_lun for higher speed devices scsi: qla2xxx: Fix a locking imbalance in qlt_24xx_handle_els() scsi: scsi_dh: Document alua_rtpg_queue() arguments scsi: Remove Makefile entry for oktagon files scsi: aic7xxx: remove aiclib.c scsi: qla2xxx: Avoid triggering undefined behavior in qla2x00_mbx_completion() scsi: mptfusion: Add bounds check in mptctl_hp_targetinfo() scsi: sym53c8xx_2: iterator underflow in sym_getsync() scsi: bnx2fc: Fix check in SCSI completion handler for timed out request scsi: csiostor: remove redundant assignment to pointer 'ln' scsi: ufs: Enable quirk to ignore sending WRITE_SAME command scsi: ibmvfc: fix misdefined reserved field in ibmvfc_fcp_rsp_info scsi: qla2xxx: Fix memory corruption during hba reset test scsi: mpt3sas: fix an out of bound write
2018-02-23Merge tag 'drm-fixes-for-v4.16-rc3' of ↵Linus Torvalds
git://people.freedesktop.org/~airlied/linux Pull drm fixes from Dave Airlie: "A bunch of fixes for rc3: Exynos: - fixes for using monotonic timestamps - register definitions - removal of unused file ipu-v3L - minor changes - make some register arrays const+static - fix some leaks meson: - fix for vsync atomic: - fix for memory leak EDID parser: - add quirks for some more non-desktop devices - 6-bit panel fix. drm_mm: - fix a bug in the core drm mm hole handling cirrus: - fix lut loading regression Lastly there is a deadlock fix around runtime suspend for secondary GPUs. There was a deadlock between one thread trying to wait for a workqueue job to finish in the runtime suspend path, and the workqueue job it was waiting for in turn waiting for a runtime_get_sync to return. The fixes avoids it by not doing the runtime sync in the workqueue as then we always wait for all those tasks to complete before we runtime suspend" * tag 'drm-fixes-for-v4.16-rc3' of git://people.freedesktop.org/~airlied/linux: (25 commits) drm/tve200: fix kernel-doc documentation comment include drm/edid: quirk Sony PlayStation VR headset as non-desktop drm/edid: quirk Windows Mixed Reality headsets as non-desktop drm/edid: quirk Oculus Rift headsets as non-desktop drm/meson: fix vsync buffer update drm: Handle unexpected holes in color-eviction drm: exynos: Use proper macro definition for HDMI_I2S_PIN_SEL_1 drm/exynos: remove exynos_drm_rotator.h drm/exynos: g2d: Delete an error message for a failed memory allocation in two functions drm/exynos: fix comparison to bitshift when dealing with a mask drm/exynos: g2d: use monotonic timestamps drm/edid: Add 6 bpc quirk for CPT panel in Asus UX303LA gpu: ipu-csi: add 10/12-bit grayscale support to mbus_code_to_bus_cfg gpu: ipu-cpmem: add 16-bit grayscale support to ipu_cpmem_set_image gpu: ipu-v3: prg: fix device node leak in ipu_prg_lookup_by_phandle gpu: ipu-v3: pre: fix device node leak in ipu_pre_lookup_by_phandle drm/amdgpu: Fix deadlock on runtime suspend drm/radeon: Fix deadlock on runtime suspend drm/nouveau: Fix deadlock on runtime suspend drm: Allow determining if current task is output poll worker ...
2018-02-23net_sched: gen_estimator: fix broken estimators based on percpu statsEric Dumazet
pfifo_fast got percpu stats lately, uncovering a bug I introduced last year in linux-4.10. I missed the fact that we have to clear our temporary storage before calling __gnet_stats_copy_basic() in the case of percpu stats. Without this fix, rate estimators (tc qd replace dev xxx root est 1sec 4sec pfifo_fast) are utterly broken. Fixes: 1c0d32fde5bd ("net_sched: gen_estimator: complete rewrite of rate estimators") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller
Alexei Starovoitov says: ==================== pull-request: bpf 2018-02-22 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) two urgent fixes for bpf_tail_call logic for x64 and arm64 JITs, from Daniel. 2) cond_resched points in percpu array alloc/free paths, from Eric. 3) lockdep and other minor fixes, from Yonghong, Arnd, Anders, Li. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-23gianfar: simplify FCS handling and fix memory leakAndy Spencer
Previously, buffer descriptors containing only the frame check sequence (FCS) were skipped and not added to the skb. However, the page reference count was still incremented, leading to a memory leak. Fixing this inside gfar_add_rx_frag() is difficult due to reserved memory handling and page reuse. Instead, move the FCS handling to gfar_process_frame() and trim off the FCS before passing the skb up the networking stack. Signed-off-by: Andy Spencer <aspencer@spacex.com> Signed-off-by: Jim Gruen <jgruen@spacex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-23ipv6 sit: work around bogus gcc-8 -Wrestrict warningArnd Bergmann
gcc-8 has a new warning that detects overlapping input and output arguments in memcpy(). It triggers for sit_init_net() calling ipip6_tunnel_clone_6rd(), which is actually correct: net/ipv6/sit.c: In function 'sit_init_net': net/ipv6/sit.c:192:3: error: 'memcpy' source argument is the same as destination [-Werror=restrict] The problem here is that the logic detecting the memcpy() arguments finds them to be the same, but the conditional that tests for the input and output of ipip6_tunnel_clone_6rd() to be identical is not a compile-time constant. We know that netdev_priv(t->dev) is the same as t for a tunnel device, and comparing "dev" directly here lets the compiler figure out as well that 'dev == sitn->fb_tunnel_dev' when called from sit_init_net(), so it no longer warns. This code is old, so Cc stable to make sure that we don't get the warning for older kernels built with new gcc. Cc: Martin Sebor <msebor@gmail.com> Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=83456 Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-23macvlan: fix use-after-free in macvlan_common_newlink()Alexey Kodanev
The following use-after-free was reported by KASan when running LTP macvtap01 test on 4.16-rc2: [10642.528443] BUG: KASAN: use-after-free in macvlan_common_newlink+0x12ef/0x14a0 [macvlan] [10642.626607] Read of size 8 at addr ffff880ba49f2100 by task ip/18450 ... [10642.963873] Call Trace: [10642.994352] dump_stack+0x5c/0x7c [10643.035325] print_address_description+0x75/0x290 [10643.092938] kasan_report+0x28d/0x390 [10643.137971] ? macvlan_common_newlink+0x12ef/0x14a0 [macvlan] [10643.207963] macvlan_common_newlink+0x12ef/0x14a0 [macvlan] [10643.275978] macvtap_newlink+0x171/0x260 [macvtap] [10643.334532] rtnl_newlink+0xd4f/0x1300 ... [10646.256176] Allocated by task 18450: [10646.299964] kasan_kmalloc+0xa6/0xd0 [10646.343746] kmem_cache_alloc_trace+0xf1/0x210 [10646.397826] macvlan_common_newlink+0x6de/0x14a0 [macvlan] [10646.464386] macvtap_newlink+0x171/0x260 [macvtap] [10646.522728] rtnl_newlink+0xd4f/0x1300 ... [10647.022028] Freed by task 18450: [10647.061549] __kasan_slab_free+0x138/0x180 [10647.111468] kfree+0x9e/0x1c0 [10647.147869] macvlan_port_destroy+0x3db/0x650 [macvlan] [10647.211411] rollback_registered_many+0x5b9/0xb10 [10647.268715] rollback_registered+0xd9/0x190 [10647.319675] register_netdevice+0x8eb/0xc70 [10647.370635] macvlan_common_newlink+0xe58/0x14a0 [macvlan] [10647.437195] macvtap_newlink+0x171/0x260 [macvtap] Commit d02fd6e7d293 ("macvlan: Fix one possible double free") handles the case when register_netdevice() invokes ndo_uninit() on error and as a result free the port. But 'macvlan_port_get_rtnl(dev))' check (returns dev->rx_handler_data), which was added by this commit in order to prevent double free, is not quite correct: * for macvlan it always returns NULL because 'lowerdev' is the one that was used to register rx handler (port) in macvlan_port_create() as well as to unregister it in macvlan_port_destroy(). * for macvtap it always returns a valid pointer because macvtap registers its own rx handler before macvlan_common_newlink(). Fixes: d02fd6e7d293 ("macvlan: Fix one possible double free") Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-23arm64: fix unwind_frame() for filtered out fn for function graph tracingPratyush Anand
do_task_stat() calls get_wchan(), which further does unwind_frame(). unwind_frame() restores frame->pc to original value in case function graph tracer has modified a return address (LR) in a stack frame to hook a function return. However, if function graph tracer has hit a filtered function, then we can't unwind it as ftrace_push_return_trace() has biased the index(frame->graph) with a 'huge negative' offset(-FTRACE_NOTRACE_DEPTH). Moreover, arm64 stack walker defines index(frame->graph) as unsigned int, which can not compare a -ve number. Similar problem we can have with calling of walk_stackframe() from save_stack_trace_tsk() or dump_backtrace(). This patch fixes unwind_frame() to test the index for -ve value and restore index accordingly before we can restore frame->pc. Reproducer: cd /sys/kernel/debug/tracing/ echo schedule > set_graph_notrace echo 1 > options/display-graph echo wakeup > current_tracer ps -ef | grep -i agent Above commands result in: Unable to handle kernel paging request at virtual address ffff801bd3d1e000 pgd = ffff8003cbe97c00 [ffff801bd3d1e000] *pgd=0000000000000000, *pud=0000000000000000 Internal error: Oops: 96000006 [#1] SMP [...] CPU: 5 PID: 11696 Comm: ps Not tainted 4.11.0+ #33 [...] task: ffff8003c21ba000 task.stack: ffff8003cc6c0000 PC is at unwind_frame+0x12c/0x180 LR is at get_wchan+0xd4/0x134 pc : [<ffff00000808892c>] lr : [<ffff0000080860b8>] pstate: 60000145 sp : ffff8003cc6c3ab0 x29: ffff8003cc6c3ab0 x28: 0000000000000001 x27: 0000000000000026 x26: 0000000000000026 x25: 00000000000012d8 x24: 0000000000000000 x23: ffff8003c1c04000 x22: ffff000008c83000 x21: ffff8003c1c00000 x20: 000000000000000f x19: ffff8003c1bc0000 x18: 0000fffffc593690 x17: 0000000000000000 x16: 0000000000000001 x15: 0000b855670e2b60 x14: 0003e97f22cf1d0f x13: 0000000000000001 x12: 0000000000000000 x11: 00000000e8f4883e x10: 0000000154f47ec8 x9 : 0000000070f367c0 x8 : 0000000000000000 x7 : 00008003f7290000 x6 : 0000000000000018 x5 : 0000000000000000 x4 : ffff8003c1c03cb0 x3 : ffff8003c1c03ca0 x2 : 00000017ffe80000 x1 : ffff8003cc6c3af8 x0 : ffff8003d3e9e000 Process ps (pid: 11696, stack limit = 0xffff8003cc6c0000) Stack: (0xffff8003cc6c3ab0 to 0xffff8003cc6c4000) [...] [<ffff00000808892c>] unwind_frame+0x12c/0x180 [<ffff000008305008>] do_task_stat+0x864/0x870 [<ffff000008305c44>] proc_tgid_stat+0x3c/0x48 [<ffff0000082fde0c>] proc_single_show+0x5c/0xb8 [<ffff0000082b27e0>] seq_read+0x160/0x414 [<ffff000008289e6c>] __vfs_read+0x58/0x164 [<ffff00000828b164>] vfs_read+0x88/0x144 [<ffff00000828c2e8>] SyS_read+0x60/0xc0 [<ffff0000080834a0>] __sys_trace_return+0x0/0x4 Fixes: 20380bb390a4 (arm64: ftrace: fix a stack tracer's output under function graph tracer) Signed-off-by: Pratyush Anand <panand@redhat.com> Signed-off-by: Jerome Marchand <jmarchan@redhat.com> [catalin.marinas@arm.com: replace WARN_ON with WARN_ON_ONCE] Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-02-22integrity/security: fix digsig.c build error with header fileRandy Dunlap
security/integrity/digsig.c has build errors on some $ARCH due to a missing header file, so add it. security/integrity/digsig.c:146:2: error: implicit declaration of function 'vfree' [-Werror=implicit-function-declaration] Reported-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Mimi Zohar <zohar@linux.vnet.ibm.com> Cc: linux-integrity@vger.kernel.org Link: http://kisskb.ellerman.id.au/kisskb/head/13396/ Signed-off-by: James Morris <james.morris@microsoft.com>
2018-02-22Merge tag 'keys-fixes-20180222-2' of ↵James Morris
https://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs into fixes-v4.16-rc3 Keyrings fixes.
2018-02-23Merge tag 'imx-drm-next-2018-02-22' of ↵Dave Airlie
git://git.pengutronix.de/git/pza/linux into drm-fixes drm/imx: ipu-v3 fixups and grayscale support - Make const interrupt register arrays static, reduces object size. - Fix device_node leaks in PRE/PRG phandle lookup functions. - Add 8-bit and 16-bit grayscale buffer support to ipu_cpmem_set_image, - add 10-bit and 12-bit grayscale media bus support to ipu-csi, to be used by the imx-media driver. * tag 'imx-drm-next-2018-02-22' of git://git.pengutronix.de/git/pza/linux: gpu: ipu-csi: add 10/12-bit grayscale support to mbus_code_to_bus_cfg gpu: ipu-cpmem: add 16-bit grayscale support to ipu_cpmem_set_image gpu: ipu-v3: prg: fix device node leak in ipu_prg_lookup_by_phandle gpu: ipu-v3: pre: fix device node leak in ipu_pre_lookup_by_phandle gpu: ipu-cpmem: add 8-bit grayscale support to ipu_cpmem_set_image gpu: ipu-v3: make const arrays int_reg static, shrinks object size
2018-02-22MIPS: boot: Define __ASSEMBLY__ for its.S buildKees Cook
The MIPS %.its.S compiler command did not define __ASSEMBLY__, which meant when compiler_types.h was added to kconfig.h, unexpected things appeared (e.g. struct declarations) which should not have been present. As done in the general %.S compiler command, __ASSEMBLY__ is now included here too. The failure was: Error: arch/mips/boot/vmlinux.gz.its:201.1-2 syntax error FATAL ERROR: Unable to parse input tree /usr/bin/mkimage: Can't read arch/mips/boot/vmlinux.gz.itb.tmp: Invalid argument /usr/bin/mkimage Can't add hashes to FIT blob Reported-by: kbuild test robot <lkp@intel.com> Fixes: 28128c61e08e ("kconfig.h: Include compiler types to avoid missed struct attributes") Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-22Merge branch 'siginfo-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull siginfo fix from Eric Biederman: "This fixes a build error that only shows up on blackfin" * 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: fs/signalfd: fix build error for BUS_MCEERR_AR
2018-02-22Merge branch 'linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fix from Herbert Xu: "Fix an oops in the s5p-sss driver when used with ecb(aes)" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: s5p-sss - Fix kernel Oops in AES-ECB mode
2018-02-22bpf, arm64: fix out of bounds access in tail callDaniel Borkmann
I recently noticed a crash on arm64 when feeding a bogus index into BPF tail call helper. The crash would not occur when the interpreter is used, but only in case of JIT. Output looks as follows: [ 347.007486] Unable to handle kernel paging request at virtual address fffb850e96492510 [...] [ 347.043065] [fffb850e96492510] address between user and kernel address ranges [ 347.050205] Internal error: Oops: 96000004 [#1] SMP [...] [ 347.190829] x13: 0000000000000000 x12: 0000000000000000 [ 347.196128] x11: fffc047ebe782800 x10: ffff808fd7d0fd10 [ 347.201427] x9 : 0000000000000000 x8 : 0000000000000000 [ 347.206726] x7 : 0000000000000000 x6 : 001c991738000000 [ 347.212025] x5 : 0000000000000018 x4 : 000000000000ba5a [ 347.217325] x3 : 00000000000329c4 x2 : ffff808fd7cf0500 [ 347.222625] x1 : ffff808fd7d0fc00 x0 : ffff808fd7cf0500 [ 347.227926] Process test_verifier (pid: 4548, stack limit = 0x000000007467fa61) [ 347.235221] Call trace: [ 347.237656] 0xffff000002f3a4fc [ 347.240784] bpf_test_run+0x78/0xf8 [ 347.244260] bpf_prog_test_run_skb+0x148/0x230 [ 347.248694] SyS_bpf+0x77c/0x1110 [ 347.251999] el0_svc_naked+0x30/0x34 [ 347.255564] Code: 9100075a d280220a 8b0a002a d37df04b (f86b694b) [...] In this case the index used in BPF r3 is the same as in r1 at the time of the call, meaning we fed a pointer as index; here, it had the value 0xffff808fd7cf0500 which sits in x2. While I found tail calls to be working in general (also for hitting the error cases), I noticed the following in the code emission: # bpftool p d j i 988 [...] 38: ldr w10, [x1,x10] 3c: cmp w2, w10 40: b.ge 0x000000000000007c <-- signed cmp 44: mov x10, #0x20 // #32 48: cmp x26, x10 4c: b.gt 0x000000000000007c 50: add x26, x26, #0x1 54: mov x10, #0x110 // #272 58: add x10, x1, x10 5c: lsl x11, x2, #3 60: ldr x11, [x10,x11] <-- faulting insn (f86b694b) 64: cbz x11, 0x000000000000007c [...] Meaning, the tests passed because commit ddb55992b04d ("arm64: bpf: implement bpf_tail_call() helper") was using signed compares instead of unsigned which as a result had the test wrongly passing. Change this but also the tail call count test both into unsigned and cap the index as u32. Latter we did as well in 90caccdd8cc0 ("bpf: fix bpf_tail_call() x64 JIT") and is needed in addition here, too. Tested on HiSilicon Hi1616. Result after patch: # bpftool p d j i 268 [...] 38: ldr w10, [x1,x10] 3c: add w2, w2, #0x0 40: cmp w2, w10 44: b.cs 0x0000000000000080 48: mov x10, #0x20 // #32 4c: cmp x26, x10 50: b.hi 0x0000000000000080 54: add x26, x26, #0x1 58: mov x10, #0x110 // #272 5c: add x10, x1, x10 60: lsl x11, x2, #3 64: ldr x11, [x10,x11] 68: cbz x11, 0x0000000000000080 [...] Fixes: ddb55992b04d ("arm64: bpf: implement bpf_tail_call() helper") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-02-22bpf, x64: implement retpoline for tail callDaniel Borkmann
Implement a retpoline [0] for the BPF tail call JIT'ing that converts the indirect jump via jmp %rax that is used to make the long jump into another JITed BPF image. Since this is subject to speculative execution, we need to control the transient instruction sequence here as well when CONFIG_RETPOLINE is set, and direct it into a pause + lfence loop. The latter aligns also with what gcc / clang emits (e.g. [1]). JIT dump after patch: # bpftool p d x i 1 0: (18) r2 = map[id:1] 2: (b7) r3 = 0 3: (85) call bpf_tail_call#12 4: (b7) r0 = 2 5: (95) exit With CONFIG_RETPOLINE: # bpftool p d j i 1 [...] 33: cmp %edx,0x24(%rsi) 36: jbe 0x0000000000000072 |* 38: mov 0x24(%rbp),%eax 3e: cmp $0x20,%eax 41: ja 0x0000000000000072 | 43: add $0x1,%eax 46: mov %eax,0x24(%rbp) 4c: mov 0x90(%rsi,%rdx,8),%rax 54: test %rax,%rax 57: je 0x0000000000000072 | 59: mov 0x28(%rax),%rax 5d: add $0x25,%rax 61: callq 0x000000000000006d |+ 66: pause | 68: lfence | 6b: jmp 0x0000000000000066 | 6d: mov %rax,(%rsp) | 71: retq | 72: mov $0x2,%eax [...] * relative fall-through jumps in error case + retpoline for indirect jump Without CONFIG_RETPOLINE: # bpftool p d j i 1 [...] 33: cmp %edx,0x24(%rsi) 36: jbe 0x0000000000000063 |* 38: mov 0x24(%rbp),%eax 3e: cmp $0x20,%eax 41: ja 0x0000000000000063 | 43: add $0x1,%eax 46: mov %eax,0x24(%rbp) 4c: mov 0x90(%rsi,%rdx,8),%rax 54: test %rax,%rax 57: je 0x0000000000000063 | 59: mov 0x28(%rax),%rax 5d: add $0x25,%rax 61: jmpq *%rax |- 63: mov $0x2,%eax [...] * relative fall-through jumps in error case - plain indirect jump as before [0] https://support.google.com/faqs/answer/7625886 [1] https://github.com/gcc-mirror/gcc/commit/a31e654fa107be968b802786d747e962c2fcdb2b Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-02-22fs/signalfd: fix build error for BUS_MCEERR_ARRandy Dunlap
Fix build error in fs/signalfd.c by using same method that is used in kernel/signal.c: separate blocks for different signal si_code values. ./fs/signalfd.c: error: 'BUS_MCEERR_AR' undeclared (first use in this function) Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2018-02-22rxrpc: Fix send in rxrpc_send_data_packet()David Howells
All the kernel_sendmsg() calls in rxrpc_send_data_packet() need to send both parts of the iov[] buffer, but one of them does not. Fix it so that it does. Without this, short IPv6 rxrpc DATA packets may be seen that have the rxrpc header included, but no payload. Fixes: 5a924b8951f8 ("rxrpc: Don't store the rxrpc header in the Tx queue sk_buffs") Reported-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-22net: aquantia: Fix error handling in aq_pci_probe()Dan Carpenter
We should check "self->aq_hw" for allocation failure, and also we should free it on the error paths. Fixes: 23ee07ad3c2f ("net: aquantia: Cleanup pci functions module") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-19 16:39:52 +0000