summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-03-09Merge branch 'drm-fixes-4.16' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-fixes Fixes for 4.16. A bit bigger than I would have liked, but most of that is DC fixes which Harry helped me pull together from the past few weeks. Highlights: - Fix DL DVI with DC - Various RV fixes for DC - Overlay fixes for DC - Fix HDMI2 handling on boards without HBR tables in the vbios - Fix crash with pass-through on SI on amdgpu - Fix RB harvesting on KV - Fix hibernation failures on UVD with certain cards * 'drm-fixes-4.16' of git://people.freedesktop.org/~agd5f/linux: (35 commits) drm/amd/display: validate plane format on primary plane drm/amdgpu:Always save uvd vcpu_bo in VM Mode drm/amdgpu:Correct max uvd handles drm/amd/display: early return if not in vga mode in disable_vga drm/amd/display: Fix takover from VGA mode drm/amd/display: Fix memleaks when atomic check fails. drm/amd/display: Return success when enabling interrupt drm/amd/display: Use crtc enable/disable_vblank hooks drm/amd/display: update infoframe after dig fe is turned on drm/amd/display: fix boot-up on vega10 drm/amd/display: fix cursor related Pstate hang drm/amd/display: Set irq state only on existing crtcs drm/amd/display: Fixed non-native modes not lighting up drm/amd/display: Call update_stream_signal directly from amdgpu_dm drm/amd/display: Make create_stream_for_sink more consistent drm/amd/display: Don't block dual-link DVI modes drm/amd/display: Don't allow dual-link DVI on all ASICs. drm/amd/display: Pass signal directly to enable_tmds_output drm/amd/display: Remove unnecessary fail labels in create_stream_for_sink drm/amd/display: Move MAX_TMDS_CLOCK define to header ...
2018-03-09Merge tag 'drm-misc-fixes-2018-03-07' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes sun4i fixes on clk, division by zero and LVDS. * tag 'drm-misc-fixes-2018-03-07' of git://anongit.freedesktop.org/drm/drm-misc: drm/sun4i: crtc: Call drm_crtc_vblank_on / drm_crtc_vblank_off drm/sun4i: rgb: Fix potential division by zero drm/sun4i: tcon: Reduce the scope of the LVDS error a bit drm/sun4i: Release exclusive clock lock when disabling TCON drm/sun4i: Fix dclk_set_phase
2018-03-09Merge tag 'drm-intel-fixes-2018-03-07' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - 2 fixes: 1 for perf and 1 execlist submission race. * tag 'drm-intel-fixes-2018-03-07' of git://anongit.freedesktop.org/drm/drm-intel: drm/i915: Suspend submission tasklets around wedging drm/i915/perf: fix perf stream opening lock
2018-03-07drm/amd/display: validate plane format on primary planeShirish S
In dce110, the plane configuration is such that plane 0 or the primary plane should be rendered with only RGB data. This patch adds the validation to ensure that no video data is rendered on plane 0. Signed-off-by: Shirish S <shirish.s@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-07drm/amdgpu:Always save uvd vcpu_bo in VM ModeJames Zhu
When UVD is in VM mode, there is not uvd handle exchanged, uvd.handles are always 0. So vcpu_bo always need save, Otherwise amdgpu driver will fail during suspend/resume. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105021 Signed-off-by: James Zhu <James.Zhu@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2018-03-07drm/amdgpu:Correct max uvd handlesJames Zhu
Max uvd handles should use adev->uvd.max_handles instead of AMDGPU_MAX_UVD_HANDLES here. Signed-off-by: James Zhu <James.Zhu@amd.com> Reviewed-by: Leo Liu <leo.liu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2018-03-07drm/amd/display: early return if not in vga mode in disable_vgaEric Yang
The work around for hw bug causes S3 resume failure. Don't execute disable vga logic if not in vga mode. Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-07drm/amd/display: Fix takover from VGA modeBhawanpreet Lakha
HW Engineer's Notes: During switch from vga->extended, if we set the VGA_TEST_ENABLE and then hit the VGA_TEST_RENDER_START, then the DCHUBP timing gets updated correctly. Then vBIOS will have it poll for the VGA_TEST_RENDER_DONE and unset VGA_TEST_ENABLE, to leave it in the same state as before. Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-07drm/amd/display: Fix memleaks when atomic check fails.Leo (Sunpeng) Li
While checking plane states for updates during atomic check, we create dc_plane_states in preparation. These dc states should be freed if something errors. Although the input transfer function is also freed by dc_plane_state_release(), we should free it (on error) under the same scope as where it is created. Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-07drm/amd/display: Return success when enabling interruptHarry Wentland
Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Roman Li <Roman.Li@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-07drm/amd/display: Use crtc enable/disable_vblank hooksHarry Wentland
Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-07drm/amd/display: update infoframe after dig fe is turned onEric Yang
Before dig fe is enabled, infoframe can't be programmed. So in suspend resume case our infoframe programmming was not going through. This change changes the sequence so that infoframe is programmed after. Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-07drm/amd/display: fix boot-up on vega10Roman Li
Fixing null-deref on Vega10 due to regression after 'fix cursor related Pstate hang' change. Added null checks in setting cursor position. Signed-off-by: Roman Li <Roman.Li@amd.com> Reviewed-by: Eric Yang <eric.yang2@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-07drm/amd/display: fix cursor related Pstate hangEric Yang
Move cursor programming to inside the OTG_MASTER_UPDATE_LOCK If graphics plane go from 1 pipe to hsplit, the cursor updates after mpc programming and unlock. Which means there is a window of time where cursor is enabled on the wrong pipe if it's on the right side of the screen (i.e. case where cursor need to move from pipe 0 to pipe 3 post split). This will cause pstate hang. Solution is to program the cursor while still locked. Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-07drm/amd/display: Set irq state only on existing crtcsMikita Lipski
Because AMDGPU_CRTC_IRQ_VLINE1 = 6, it expected 6 more crtcs to be programed with disabled irq state in amdgpu_irq_disable_all. That caused errors and accessed the wrong memory location. Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-07drm/amd/display: Fixed non-native modes not lighting upJerry (Fangzhi) Zuo
There is no need to call drm_mode_set_crtcinfo() again once crtc timing is decided. Otherwise non-native/unsupported timing might get overwritten. Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-07drm/amd/display: Call update_stream_signal directly from amdgpu_dmHarry Wentland
There's no good place in DC to cover all place where stream signal should be updated. update_stream_signal depends on timing which comes from DM. Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-07drm/amd/display: Make create_stream_for_sink more consistentHarry Wentland
We've got a helper function to call dc_create_stream_for_sink and one other place that calls it directly. Make sure we call the helper functions always since we need to update a bunch of things in stream and don't want to miss that. Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-07drm/amd/display: Don't block dual-link DVI modesHarry Wentland
Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-07drm/amd/display: Don't allow dual-link DVI on all ASICs.Harry Wentland
Our APUs (Carrizo, Stoney, Raven) don't support it. v2: Don't use is_apu as other ASICs might also not support it Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-07drm/amd/display: Pass signal directly to enable_tmds_outputHarry Wentland
This makes the check for HDMI and dual-link DVI a bit more straightforward. Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-07drm/amd/display: Remove unnecessary fail labels in create_stream_for_sinkHarry Wentland
Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-07drm/amd/display: Move MAX_TMDS_CLOCK define to headerHarry Wentland
Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-07drm/amd/display: Fix FBC topology changeRoman Li
With FBC enabled there was a potential null-deref on topology change due to hardcorded pipe index. Signed-off-by: Roman Li <Roman.Li@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-07drm/amd/display: Fix topology change issue in MST rehookJerry (Fangzhi) Zuo
When topology changed and rehook up MST display to the same DP connector, need to take care of drm_dp_mst_port object. Due to the topology is changed, drm_dp_mst_port and corresponding i2c_algorithm object could be NULL in such situation. Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com> Reviewed-by: Roman Li <Roman.Li@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-07drm/amd/display: disable CRTCs with NULL FB on their primary plane (V2)Shirish S
The below commit "drm/atomic: Try to preserve the crtc enabled state in drm_atomic_remove_fb, v2" introduces a slight behavioral change to rmfb. Instead of disabling a crtc when the primary plane is disabled, it now preserves it. This change leads to BUG hit while performing atomic commit on amd driver. As a fix this patch ensures that we disable the CRTC's with NULL FB by returning -EINVAL and hence triggering fall back to the old behavior and turning off the crtc in atomic_remove_fb(). V2: Added error check for plane_state and removed sanity check for crtc. Signed-off-by: Shirish S <shirish.s@amd.com> Signed-off-by: Pratik Vishwakarma <Pratik.Vishwakarma@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-07drm/amdgpu/dce6: Use DRM_DEBUG instead of DRM_INFO for HPD IRQ infoMichel Dänzer
For consistency with other DCE generations. HPD IRQs appear to be working fine. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-07drm/amd/display: Default HDMI6G support to true. Log VBIOS table error.Harry Wentland
There have been many reports of Ellesmere and Baffin systems not being able to drive HDMI 4k60 due to the fact that we check the HDMI_6GB_EN bit from VBIOS table. Windows seems to not have this issue. On some systems we fail to the encoder cap info from VBIOS. In that case we should default to enabling HDMI6G support. This was tested by dwagner on https://bugs.freedesktop.org/show_bug.cgi?id=102820 Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Roman Li <Roman.Li@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2018-03-07drm/amd/display: update plane params before validationShirish S
This patch updates the dc's plane state with the parameters set by the user side. This is needed to validate the plane capabilities with the parameters user space wants to set. Signed-off-by: Shirish S <shirish.s@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-07drm/amd/display: validate plane in dce110 for scalingShirish S
CZ & ST support uptil a limit 2:1 downscaling, this patch adds validate_plane hook, that shall be used to validate the plane attributes sent by the user space based on dce110 capabilities. Signed-off-by: Shirish S <shirish.s@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-07drm/amd/display: defer modeset check in dm_update_planes_stateShirish S
amdgpu_dm_atomic_check() is used to validate the entire configuration of planes and crtc's that the user space wants to commit. However amdgpu_dm_atomic_check() depends upon DRM_MODE_ATOMIC_ALLOW_MODESET flag else its mostly dummy. Its not mandatory for the user space to set DRM_MODE_ATOMIC_ALLOW_MODESET, and in general its not set either along with DRM_MODE_ATOMIC_TEST_ONLY. Considering its importantance, this patch defers the allow_modeset check in dm_update_planes_state(), so that there shall be scope to validate the configuration sent from user space, without impacting the population of dc/dm related data structures. Signed-off-by: Shirish S <shirish.s@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-07drm/amd/display: Don't blow up if TG is NULL in dce110_vblank_setHarry Wentland
Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Roman Li <Roman.Li@amd.com> Acked-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-07drm/amdgpu: Notify sbios device ready before send requestRex Zhu
it is required if a platform supports PCIe root complex core voltage reduction. After receiving this notification, SBIOS can apply default PCIe root complex power policy. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2018-03-07drm/amdgpu: fix KV harvestingAlex Deucher
Always set the graphics values to the max for the asic type. E.g., some 1 RB chips are actually 1 RB chips, others are actually harvested 2 RB chips. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=99353 Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2018-03-07drm/radeon: fix KV harvestingAlex Deucher
Always set the graphics values to the max for the asic type. E.g., some 1 RB chips are actually 1 RB chips, others are actually harvested 2 RB chips. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=99353 Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2018-03-06drm/sun4i: crtc: Call drm_crtc_vblank_on / drm_crtc_vblank_offMaxime Ripard
Make sure that the CRTC code will call the enable/disable_vblank hooks. Otherwise, since the refcounting will be off, we might end up in a situation where the vblank management functions are called while the CRTC is off. Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180221125703.4595-3-maxime.ripard@bootlin.com
2018-03-06drm/sun4i: rgb: Fix potential division by zeroMaxime Ripard
In the case where mode_valid callback of our RGB connector was called before mode_set was being called, the range of dividers would not be set, resulting in a division by zero later on in the clk_round_rate logic. Set the range of dividers before calling clk_round_rate to fix this. Reviewed-by: Chen-Yu Tsai <wens@csie.org> Tested-by: Giulio Benetti <giulio.benetti@micronovasrl.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180221125703.4595-2-maxime.ripard@bootlin.com
2018-03-06drm/sun4i: tcon: Reduce the scope of the LVDS error a bitMaxime Ripard
The current logic to deal with old DT missing the LVDS properties doesn't take into account whether the LVDS output is supported in the first place, resulting in spurious error messages on SoCs where it doesn't even matter. Introduce a new TCON flag to list if LVDS is supported at all to prevent this from happening. Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180221125703.4595-1-maxime.ripard@bootlin.com
2018-03-05drm/i915: Suspend submission tasklets around wedgingChris Wilson
After staring hard at sequences like [ 28.199013] systemd-1 2..s. 26062228us : execlists_submission_tasklet: rcs0 cs-irq head=0 [0?], tail=1 [1?] [ 28.199095] systemd-1 2..s. 26062229us : execlists_submission_tasklet: rcs0 csb[1]: status=0x00000018:0x00000000, active=0x1 [ 28.199177] systemd-1 2..s. 26062230us : execlists_submission_tasklet: rcs0 out[0]: ctx=0.1, seqno=3, prio=-1024 [ 28.199258] systemd-1 2..s. 26062231us : execlists_submission_tasklet: rcs0 completed ctx=0 [ 28.199340] gem_eio-829 1..s1 26066853us : execlists_submission_tasklet: rcs0 in[0]: ctx=1.1, seqno=1, prio=0 [ 28.199421] <idle>-0 2..s. 26066863us : execlists_submission_tasklet: rcs0 cs-irq head=1 [1?], tail=2 [2?] [ 28.199503] <idle>-0 2..s. 26066865us : execlists_submission_tasklet: rcs0 csb[2]: status=0x00000001:0x00000000, active=0x1 [ 28.199585] gem_eio-829 1..s1 26067077us : execlists_submission_tasklet: rcs0 in[1]: ctx=3.1, seqno=2, prio=0 [ 28.199667] gem_eio-829 1..s1 26067078us : execlists_submission_tasklet: rcs0 in[0]: ctx=1.2, seqno=1, prio=0 [ 28.199749] <idle>-0 2..s. 26067084us : execlists_submission_tasklet: rcs0 cs-irq head=2 [2?], tail=3 [3?] [ 28.199830] <idle>-0 2..s. 26067085us : execlists_submission_tasklet: rcs0 csb[3]: status=0x00008002:0x00000001, active=0x1 [ 28.199912] <idle>-0 2..s. 26067086us : execlists_submission_tasklet: rcs0 out[0]: ctx=1.2, seqno=1, prio=0 [ 28.199994] gem_eio-829 2..s. 28246084us : execlists_submission_tasklet: rcs0 cs-irq head=3 [3?], tail=4 [4?] [ 28.200096] gem_eio-829 2..s. 28246088us : execlists_submission_tasklet: rcs0 csb[4]: status=0x00000014:0x00000001, active=0x5 [ 28.200178] gem_eio-829 2..s. 28246089us : execlists_submission_tasklet: rcs0 out[0]: ctx=0.0, seqno=0, prio=0 [ 28.200260] gem_eio-829 2..s. 28246127us : execlists_submission_tasklet: execlists_submission_tasklet:886 GEM_BUG_ON(buf[2 * head + 1] != port->context_id) the conclusion is that the only place where the ports are reset to zero, is from engine->cancel_requests called during i915_gem_set_wedged(). The race is horrible as it results from calling set-wedged on active HW (the GPU reset failed) and as such we need to be careful as the HW state changes beneath us. Fortunately, it's the same scary conditions as affect normal reset, so we can reuse the same machinery to disable state tracking as we clobber it. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104945 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Michel Thierry <michel.thierry@intel.com> Fixes: af7a8ffad9c5 ("drm/i915: Use rcu instead of stop_machine in set_wedged") Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180302113324.23189-2-chris@chris-wilson.co.uk (cherry picked from commit 963ddd63c314e9b5d9cd999873d473a93aed5380) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-03-05drm/i915/perf: fix perf stream opening lockLionel Landwerlin
We're seeing on CI that some contexts don't have the programmed OA period timer that directs the OA unit on how often to write reports. The issue is that we're not holding the drm lock from when we edit the context images down to when we set the exclusive_stream variable. This leaves a window for the deferred context allocation to call i915_oa_init_reg_state() that will not program the expected OA timer value, because we haven't set the exclusive_stream yet. v2: Drop need_lock from gen8_configure_all_contexts() (Matt) Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Fixes: 701f8231a2f ("drm/i915/perf: prune OA configs") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102254 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103715 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103755 Link: https://patchwork.freedesktop.org/patch/msgid/20180301110613.1737-1-lionel.g.landwerlin@intel.com Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: intel-gfx@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v4.14+ (cherry picked from commit 41d3fdcd15d5ecf29cc73e8b79c2327ebb54b960) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-03-05drm/amd/display: Fix active dongle hotplugRoman Li
Clean fake sink flag after detecting link on downstream port. Fixing display light-up after "hot-unplug&plug again" downstream of an active dongle. Signed-off-by: Roman Li <Roman.Li@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-05drm/amdgpu: used cached pcie gen info for SI (v2)Alex Deucher
Rather than querying it every time we need it. Also fixes a crash in VM pass through if there is no root bridge because the cached value fetch already checks this properly. v2: fix includes Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=105244 Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Rex Zhu<rezhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2018-03-05drm/amd/amdgpu: Mask rptr as well in ring debugfsTom St Denis
The read/write pointers on sdma4 devices increment beyond the ring size and should be masked. Tested on my Ryzen 2400G. Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-04Linux 4.16-rc4Linus Torvalds
2018-03-04Merge branch 'x86/urgent' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "A small set of fixes for x86: - Add missing instruction suffixes to assembly code so it can be compiled by newer GAS versions without warnings. - Switch refcount WARN exceptions to UD2 as we did in general - Make the reboot on Intel Edison platforms work - A small documentation update so text and sample command match" * 'x86/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Documentation, x86, resctrl: Make text and sample command match x86/platform/intel-mid: Handle Intel Edison reboot correctly x86/asm: Add instruction suffixes to bitops x86/entry/64: Add instruction suffix x86/refcounts: Switch to UD2 for exceptions
2018-03-04Merge branch 'x86-pti-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86/pti fixes from Thomas Gleixner: "Three fixes related to melted spectrum: - Sync the cpu_entry_area page table to initial_page_table on 32 bit. Otherwise suspend/resume fails because resume uses initial_page_table and triggers a triple fault when accessing the cpu entry area. - Zero the SPEC_CTL MRS on XEN before suspend to address a shortcoming in the hypervisor. - Fix another switch table detection issue in objtool" * 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/cpu_entry_area: Sync cpu_entry_area to initial_page_table objtool: Fix another switch table detection issue x86/xen: Zero MSR_IA32_SPEC_CTRL before suspend
2018-03-04Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fixes from Thomas Gleixner: "A small set of fixes from the timer departement: - Add a missing timer wheel clock forward when migrating timers off a unplugged CPU to prevent operating on a stale clock base and missing timer deadlines. - Use the proper shift count to extract data from a register value to prevent evaluating unrelated bits - Make the error return check in the FSL timer driver work correctly. Checking an unsigned variable for less than zero does not really work well. - Clarify the confusing comments in the ARC timer code" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timers: Forward timer base before migrating timers clocksource/drivers/arc_timer: Update some comments clocksource/drivers/mips-gic-timer: Use correct shift count to extract data clocksource/drivers/fsl_ftm_timer: Fix error return checking
2018-03-04Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixlet from Thomas Gleixner: "Just a documentation update for the missing device tree property of the R-Car M3N interrupt controller" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: dt-bindings/irqchip/renesas-irqc: Document R-Car M3-N support
2018-03-04Merge tag 'for-4.16-rc3-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: - when NR_CPUS is large, a SRCU structure can significantly inflate size of the main filesystem structure that would not be possible to allocate by kmalloc, so the kvalloc fallback is used - improved error handling - fix endiannes when printing some filesystem attributes via sysfs, this is could happen when a filesystem is moved between different endianity hosts - send fixes: the NO_HOLE mode should not send a write operation for a file hole - fix log replay for for special files followed by file hardlinks - fix log replay failure after unlink and link combination - fix max chunk size calculation for DUP allocation * tag 'for-4.16-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: Btrfs: fix log replay failure after unlink and link combination Btrfs: fix log replay failure after linking special file and fsync Btrfs: send, fix issuing write op when processing hole in no data mode btrfs: use proper endianness accessors for super_copy btrfs: alloc_chunk: fix DUP stripe size handling btrfs: Handle btrfs_set_extent_delalloc failure in relocate_file_extent_cluster btrfs: handle failure of add_pending_csums btrfs: use kvzalloc to allocate btrfs_fs_info
2018-03-03Merge branch 'i2c/for-current-fixed' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "A driver fix and a documentation fix (which makes dependency handling for the next cycle easier)" * 'i2c/for-current-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: octeon: Prevent error message on bus error dt-bindings: at24: sort manufacturers alphabetically
generated by cgit v1.2.3 (git 2.39.1) at 2025-04-15 23:29:05 +0000