summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-10-23Linux 4.14-rc6Linus Torvalds
2017-10-23Merge tag 'staging-4.14-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging and IIO fixes from Greg KH: "Here are a small number of patches to resolve some reported IIO and a staging driver problem. Nothing major here, full details are in the shortlog below. All have been in linux-next with no reported issues" * tag 'staging-4.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: bcm2835-audio: Fix memory corruption iio: adc: at91-sama5d2_adc: fix probe error on missing trigger property iio: adc: dln2-adc: fix build error iio: dummy: events: Add missing break staging: iio: ade7759: fix signed extension bug on shift of a u8 iio: pressure: zpa2326: Remove always-true check which confuses gcc iio: proximity: as3935: noise detection + threshold changes
2017-10-23Merge tag 'char-misc-4.14-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are four small fixes for 4.14-rc6. Three of them are binder driver fixes for reported issues, and the last one is a hyperv driver bugfix. Nothing major, but good fixes to get into 4.14-final. All of these have been in linux-next with no reported issues" * tag 'char-misc-4.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: android: binder: Fix null ptr dereference in debug msg android: binder: Don't get mm from task vmbus: hvsock: add proper sync for vmbus_hvsock_device_unregister() binder: call poll_wait() unconditionally.
2017-10-23Merge tag 'usb-4.14-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/PHY fixes from Greg KH: "Here are a small number of USB and PHY driver fixes for 4.14-rc6 There is the usual musb and xhci fixes in here, as well as some needed phy patches. Also is a nasty regression fix for usbfs that has started to hit a lot of people using virtual machines. All of these have been in linux-next with no reported problems" * tag 'usb-4.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (26 commits) usb: hub: Allow reset retry for USB2 devices on connect bounce USB: core: fix out-of-bounds access bug in usb_get_bos_descriptor() MAINTAINERS: fix git tree url for musb module usb: quirks: add quirk for WORLDE MINI MIDI keyboard usb: musb: sunxi: Explicitly release USB PHY on exit usb: musb: Check for host-mode using is_host_active() on reset interrupt usb: musb: musb_cppi41: Configure the number of channels for DA8xx usb: musb: musb_cppi41: Fix cppi41_set_dma_mode() for DA8xx usb: musb: musb_cppi41: Fix the address of teardown and autoreq registers USB: musb: fix late external abort on suspend USB: musb: fix session-bit runtime-PM quirk usb: cdc_acm: Add quirk for Elatec TWN3 USB: devio: Revert "USB: devio: Don't corrupt user memory" usb: xhci: Handle error condition in xhci_stop_device() usb: xhci: Reset halted endpoint if trb is noop xhci: Cleanup current_cmd in xhci_cleanup_command_queue() xhci: Identify USB 3.1 capable hosts by their port protocol capability USB: serial: metro-usb: add MS7820 device id phy: rockchip-typec: Check for errors from tcphy_phy_init() phy: rockchip-typec: Don't set the aux voltage swing to 400 mV ...
2017-10-22Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fix from Dmitry Torokhov: "A fix for a broken commit in the previous pull breaking automatic module loading of input handlers, such ad evdev" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: do not use property bits when generating module alias
2017-10-22Input: do not use property bits when generating module aliasDmitry Torokhov
The commit 8724ecb07229 ("Input: allow matching device IDs on property bits") started using property bits when generating module aliases for input handlers, but did not adjust the generation of MODALIAS attribute on input device uevents, breaking automatic module loading. Given that no handler currently uses property bits in their module tables, let's revert this part of the commit for now. Reported-by: Damien Wyart <damien.wyart@gmail.com> Tested-by: Damien Wyart <damien.wyart@gmail.com> Fixes: 8724ecb07229 ("Input: allow matching device IDs on property bits") Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-10-22Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "A couple of fixes addressing the following issues: - The last polishing for the TLB code, removing the last BUG_ON() and the debug file along with tidying up the lazy TLB code. - Prevent triple fault on 1st Gen. 486 caused by stupidly calling the early IDT setup after the first function which causes a fault which should be caught by the exception table. - Limit the mmap of /dev/mem to valid addresses - Prevent late microcode loading on Broadwell X - Remove a redundant assignment in the cache info code" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: Limit mmap() of /dev/mem to valid physical addresses x86/mm: Remove debug/x86/tlb_defer_switch_to_init_mm x86/mm: Tidy up "x86/mm: Flush more aggressively in lazy TLB mode" x86/mm/64: Remove the last VM_BUG_ON() from the TLB code x86/microcode/intel: Disable late loading on model 79 x86/idt: Initialize early IDT before cr4_init_shadow() x86/cpu/intel_cacheinfo: Remove redundant assignment to 'this_leaf'
2017-10-22Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fix from Thomas Gleixner: "A single fix to make the cs5535 clock event driver robust agaist spurious interrupts" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clockevents/drivers/cs5535: Improve resilience to spurious interrupts
2017-10-22Merge branch 'smp-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull smp/hotplug fix from Thomas Gleixner: "The recent rework of the callback invocation missed to cleanup the leftovers of the operation, so under certain circumstances a subsequent CPU hotplug operation accesses stale data and crashes. Clean it up." * 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: cpu/hotplug: Reset node state after operation
2017-10-22Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Thomas Gleixner: "A series of fixes for perf tooling: - Make xyarray return the X/Y size correctly which fixes a crash in the exit code. - Fix the libc path in test so it works not only on Debian/Ubuntu correctly - Check for eBPF file existance and output a useful error message instead of failing to compile a non existant file - Make sure perf_hpp_fmt is not longer references before freeing it - Use list_del_init() in the histogram code to prevent a crash when the already deleted element is deleted again - Remove the leftovers of the removed '-l' option - Add reviewer entries to the MAINTAINERS file" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf test shell trace+probe_libc_inet_pton.sh: Be compatible with Debian/Ubuntu perf xyarray: Fix wrong processing when closing evsel fd perf buildid-list: Fix crash when processing PERF_RECORD_NAMESPACE perf record: Fix documentation for a inexistent option '-l' perf tools: Add long time reviewers to MAINTAINERS perf tools: Check wether the eBPF file exists in event parsing perf hists: Add extra integrity checks to fmt_free() perf hists: Fix crash in perf_hpp__reset_output_field()
2017-10-22Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "A set of small fixes mostly in the irq drivers area: - Make the tango irq chip work correctly, which requires a new function in the generiq irq chip implementation - A set of updates to the GIC-V3 ITS driver removing a bogus BUG_ON() and parsing the VCPU table size correctly" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq: generic chip: remove irq_gc_mask_disable_reg_and_ack() irqchip/tango: Use irq_gc_mask_disable_and_ack_set genirq: generic chip: Add irq_gc_mask_disable_and_ack_set() irqchip/gic-v3-its: Add missing changes to support 52bit physical address irqchip/gic-v3-its: Fix the incorrect parsing of VCPU table size irqchip/gic-v3-its: Fix the incorrect BUG_ON in its_init_vpe_domain() DT: arm,gic-v3: Update the ITS size in the examples
2017-10-22Merge branch 'core-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull objtool fix from Thomas Gleixner: "Plug a memory leak in the instruction decoder" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Fix memory leak in decode_instructions()
2017-10-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: "A little more than usual this time around. Been travelling, so that is part of it. Anyways, here are the highlights: 1) Deal with memcontrol races wrt. listener dismantle, from Eric Dumazet. 2) Handle page allocation failures properly in nfp driver, from Jaku Kicinski. 3) Fix memory leaks in macsec, from Sabrina Dubroca. 4) Fix crashes in pppol2tp_session_ioctl(), from Guillaume Nault. 5) Several fixes in bnxt_en driver, including preventing potential NVRAM parameter corruption from Michael Chan. 6) Fix for KRACK attacks in wireless, from Johannes Berg. 7) rtnetlink event generation fixes from Xin Long. 8) Deadlock in mlxsw driver, from Ido Schimmel. 9) Disallow arithmetic operations on context pointers in bpf, from Jakub Kicinski. 10) Missing sock_owned_by_user() check in sctp_icmp_redirect(), from Xin Long. 11) Only TCP is supported for sockmap, make that explicit with a check, from John Fastabend. 12) Fix IP options state races in DCCP and TCP, from Eric Dumazet. 13) Fix panic in packet_getsockopt(), also from Eric Dumazet. 14) Add missing locked in hv_sock layer, from Dexuan Cui. 15) Various aquantia bug fixes, including several statistics handling cures. From Igor Russkikh et al. 16) Fix arithmetic overflow in devmap code, from John Fastabend. 17) Fix busted socket memory accounting when we get a fault in the tcp zero copy paths. From Willem de Bruijn. 18) Don't leave opt->tot_len uninitialized in ipv6, from Eric Dumazet" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (106 commits) stmmac: Don't access tx_q->dirty_tx before netif_tx_lock ipv6: flowlabel: do not leave opt->tot_len with garbage of_mdio: Fix broken PHY IRQ in case of probe deferral textsearch: fix typos in library helpers rxrpc: Don't release call mutex on error pointer net: stmmac: Prevent infinite loop in get_rx_timestamp_status() net: stmmac: Fix stmmac_get_rx_hwtstamp() net: stmmac: Add missing call to dev_kfree_skb() mlxsw: spectrum_router: Configure TIGCR on init mlxsw: reg: Add Tunneling IPinIP General Configuration Register net: ethtool: remove error check for legacy setting transceiver type soreuseport: fix initialization race net: bridge: fix returning of vlan range op errors sock: correct sk_wmem_queued accounting on efault in tcp zerocopy bpf: add test cases to bpf selftests to cover all access tests bpf: fix pattern matches for direct packet access bpf: fix off by one for range markings with L{T, E} patterns bpf: devmap fix arithmetic overflow in bitmap_size calculation net: aquantia: Bad udp rate on default interrupt coalescing net: aquantia: Enable coalescing management via ethtool interface ...
2017-10-22stmmac: Don't access tx_q->dirty_tx before netif_tx_lockBernd Edlinger
This is the possible reason for different hard to reproduce problems on my ARMv7-SMP test system. The symptoms are in recent kernels imprecise external aborts, and in older kernels various kinds of network stalls and unexpected page allocation failures. My testing indicates that the trouble started between v4.5 and v4.6 and prevails up to v4.14. Using the dirty_tx before acquiring the spin lock is clearly wrong and was first introduced with v4.6. Fixes: e3ad57c96715 ("stmmac: review RX/TX ring management") Signed-off-by: Bernd Edlinger <bernd.edlinger@hotmail.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-22ipv6: flowlabel: do not leave opt->tot_len with garbageEric Dumazet
When syzkaller team brought us a C repro for the crash [1] that had been reported many times in the past, I finally could find the root cause. If FlowLabel info is merged by fl6_merge_options(), we leave part of the opt_space storage provided by udp/raw/l2tp with random value in opt_space.tot_len, unless a control message was provided at sendmsg() time. Then ip6_setup_cork() would use this random value to perform a kzalloc() call. Undefined behavior and crashes. Fix is to properly set tot_len in fl6_merge_options() At the same time, we can also avoid consuming memory and cpu cycles to clear it, if every option is copied via a kmemdup(). This is the change in ip6_setup_cork(). [1] kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 0 PID: 6613 Comm: syz-executor0 Not tainted 4.14.0-rc4+ #127 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 task: ffff8801cb64a100 task.stack: ffff8801cc350000 RIP: 0010:ip6_setup_cork+0x274/0x15c0 net/ipv6/ip6_output.c:1168 RSP: 0018:ffff8801cc357550 EFLAGS: 00010203 RAX: dffffc0000000000 RBX: ffff8801cc357748 RCX: 0000000000000010 RDX: 0000000000000002 RSI: ffffffff842bd1d9 RDI: 0000000000000014 RBP: ffff8801cc357620 R08: ffff8801cb17f380 R09: ffff8801cc357b10 R10: ffff8801cb64a100 R11: 0000000000000000 R12: ffff8801cc357ab0 R13: ffff8801cc357b10 R14: 0000000000000000 R15: ffff8801c3bbf0c0 FS: 00007f9c5c459700(0000) GS:ffff8801db200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020324000 CR3: 00000001d1cf2000 CR4: 00000000001406f0 DR0: 0000000020001010 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000600 Call Trace: ip6_make_skb+0x282/0x530 net/ipv6/ip6_output.c:1729 udpv6_sendmsg+0x2769/0x3380 net/ipv6/udp.c:1340 inet_sendmsg+0x11f/0x5e0 net/ipv4/af_inet.c:762 sock_sendmsg_nosec net/socket.c:633 [inline] sock_sendmsg+0xca/0x110 net/socket.c:643 SYSC_sendto+0x358/0x5a0 net/socket.c:1750 SyS_sendto+0x40/0x50 net/socket.c:1718 entry_SYSCALL_64_fastpath+0x1f/0xbe RIP: 0033:0x4520a9 RSP: 002b:00007f9c5c458c08 EFLAGS: 00000216 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000000000718000 RCX: 00000000004520a9 RDX: 0000000000000001 RSI: 0000000020fd1000 RDI: 0000000000000016 RBP: 0000000000000086 R08: 0000000020e0afe4 R09: 000000000000001c R10: 0000000000000000 R11: 0000000000000216 R12: 00000000004bb1ee R13: 00000000ffffffff R14: 0000000000000016 R15: 0000000000000029 Code: e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85 ea 0f 00 00 48 8d 79 04 48 b8 00 00 00 00 00 fc ff df 45 8b 74 24 04 48 89 fa 48 c1 ea 03 <0f> b6 14 02 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85 RIP: ip6_setup_cork+0x274/0x15c0 net/ipv6/ip6_output.c:1168 RSP: ffff8801cc357550 Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-22of_mdio: Fix broken PHY IRQ in case of probe deferralGeert Uytterhoeven
If an Ethernet PHY is initialized before the interrupt controller it is connected to, a message like the following is printed: irq: no irq domain found for /interrupt-controller@e61c0000 ! However, the actual error is ignored, leading to a non-functional (POLL) PHY interrupt later: Micrel KSZ8041RNLI ee700000.ethernet-ffffffff:01: attached PHY driver [Micrel KSZ8041RNLI] (mii_bus:phy_addr=ee700000.ethernet-ffffffff:01, irq=POLL) Depending on whether the PHY driver will fall back to polling, Ethernet may or may not work. To fix this: 1. Switch of_mdiobus_register_phy() from irq_of_parse_and_map() to of_irq_get(). Unlike the former, the latter returns -EPROBE_DEFER if the interrupt controller is not yet available, so this condition can be detected. Other errors are handled the same as before, i.e. use the passed mdio->irq[addr] as interrupt. 2. Propagate and handle errors from of_mdiobus_register_phy() and of_mdiobus_register_device(). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-22textsearch: fix typos in library helpersRandy Dunlap
Fix spellos (typos) in textsearch library helpers. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-22rxrpc: Don't release call mutex on error pointerDavid Howells
Don't release call mutex at the end of rxrpc_kernel_begin_call() if the call pointer actually holds an error value. Fixes: 540b1c48c37a ("rxrpc: Fix deadlock between call creation and sendmsg/recvmsg") Reported-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-22Merge branch 'stmmac-hw-tstamp-fixes'David S. Miller
Jose Abreu says: ==================== net: stmmac: Fix HW timestamping Three fixes for HW timestamping feature, all of them for RX side. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-22net: stmmac: Prevent infinite loop in get_rx_timestamp_status()Jose Abreu
Prevent infinite loop by correctly setting the loop condition to break when i == 10. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-22net: stmmac: Fix stmmac_get_rx_hwtstamp()Jose Abreu
When using GMAC4 the valid timestamp is from CTX next desc but we are passing the previous desc to get_rx_timestamp_status() callback. Fix this and while at it rework a little bit the function logic. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-22net: stmmac: Add missing call to dev_kfree_skb()Jose Abreu
When RX HW timestamp is enabled and a frame is discarded we are not freeing the skb but instead only setting to NULL the entry. Add a call to dev_kfree_skb_any() so that skb entry is correctly freed. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-21Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: - joydev now implements a blacklist to avoid creating joystick nodes for accelerometers found in composite devices such as PlaStation controllers - assorted driver fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: ims-psu - check if CDC union descriptor is sane Input: joydev - blacklist ds3/ds4/udraw motion sensors Input: allow matching device IDs on property bits Input: factor out and export input_device_id matching code Input: goodix - poll the 'buffer status' bit before reading data Input: axp20x-pek - fix module not auto-loading for axp221 pek Input: tca8418 - enable interrupt after it has been requested Input: stmfts - fix setting ABS_MT_POSITION_* maximum size Input: ti_am335x_tsc - fix incorrect step config for 5 wire touchscreen Input: synaptics - disable kernel tracking on SMBus devices
2017-10-21Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs fixes from Al Viro: "MS_I_VERSION fixes - Mimi's fix + missing bits picked from Matthew (his patch contained a duplicate of the fs/namespace.c fix as well, but by that point the original fix had already been applied)" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: Convert fs/*/* to SB_I_VERSION vfs: fix mounting a filesystem with i_version
2017-10-22Merge branch 'mlxsw-fixes'David S. Miller
Jiri Pirko says: ==================== mlxsw: spectrum: Configure TTL of "inherit" for offloaded tunnels Petr says: Currently mlxsw only offloads tunnels that are configured with TTL of "inherit" (which is the default). However, Spectrum defaults to 255 and the driver neglects to change the configuration. Thus the tunnel packets from offloaded tunnels always have TTL of 255, even though tunnels with explicit TTL of 255 are never actually offloaded. To fix this, introduce support for TIGCR, the register that keeps the related bits of global tunnel configuration, and use it on first offload to properly configure inheritance of TTL of tunnel packets from overlay packets. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-22mlxsw: spectrum_router: Configure TIGCR on initPetr Machata
Spectrum tunnels do not default to ttl of "inherit" like the Linux ones do. Configure TIGCR on router init so that the TTL of tunnel packets is copied from the overlay packets. Fixes: ee954d1a91b2 ("mlxsw: spectrum_router: Support GRE tunnels") Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-22mlxsw: reg: Add Tunneling IPinIP General Configuration RegisterPetr Machata
The TIGCR register is used for setting up the IPinIP Tunnel configuration. Fixes: ee954d1a91b2 ("mlxsw: spectrum_router: Support GRE tunnels") Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-22net: ethtool: remove error check for legacy setting transceiver typeNiklas Söderlund
Commit 9cab88726929605 ("net: ethtool: Add back transceiver type") restores the transceiver type to struct ethtool_link_settings and convert_link_ksettings_to_legacy_settings() but forgets to remove the error check for the same in convert_legacy_settings_to_link_ksettings(). This prevents older versions of ethtool to change link settings. # ethtool --version ethtool version 3.16 # ethtool -s eth0 autoneg on speed 100 duplex full Cannot set new settings: Invalid argument not setting speed not setting duplex not setting autoneg While newer versions of ethtool works. # ethtool --version ethtool version 4.10 # ethtool -s eth0 autoneg on speed 100 duplex full [ 57.703268] sh-eth ee700000.ethernet eth0: Link is Down [ 59.618227] sh-eth ee700000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx Fixes: 19cab88726929605 ("net: ethtool: Add back transceiver type") Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reported-by: Renjith R V <renjith.rv@quest-global.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-22soreuseport: fix initialization raceCraig Gallek
Syzkaller stumbled upon a way to trigger WARNING: CPU: 1 PID: 13881 at net/core/sock_reuseport.c:41 reuseport_alloc+0x306/0x3b0 net/core/sock_reuseport.c:39 There are two initialization paths for the sock_reuseport structure in a socket: Through the udp/tcp bind paths of SO_REUSEPORT sockets or through SO_ATTACH_REUSEPORT_[CE]BPF before bind. The existing implementation assumedthat the socket lock protected both of these paths when it actually only protects the SO_ATTACH_REUSEPORT path. Syzkaller triggered this double allocation by running these paths concurrently. This patch moves the check for double allocation into the reuseport_alloc function which is protected by a global spin lock. Fixes: e32ea7e74727 ("soreuseport: fast reuseport UDP socket selection") Fixes: c125e80b8868 ("soreuseport: fast reuseport TCP socket selection") Signed-off-by: Craig Gallek <kraig@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-22net: bridge: fix returning of vlan range op errorsNikolay Aleksandrov
When vlan tunnels were introduced, vlan range errors got silently dropped and instead 0 was returned always. Restore the previous behaviour and return errors to user-space. Fixes: efa5356b0d97 ("bridge: per vlan dst_metadata netlink support") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-22sock: correct sk_wmem_queued accounting on efault in tcp zerocopyWillem de Bruijn
Syzkaller hits WARN_ON(sk->sk_wmem_queued) in sk_stream_kill_queues after triggering an EFAULT in __zerocopy_sg_from_iter. On this error, skb_zerocopy_stream_iter resets the skb to its state before the operation with __pskb_trim. It cannot kfree_skb like datagram callers, as the skb may have data from a previous send call. __pskb_trim calls skb_condense for unowned skbs, which adjusts their truesize. These tcp skbuffs are owned and their truesize must add up to sk_wmem_queued. But they match because their skb->sk is NULL until tcp_transmit_skb. Temporarily set skb->sk when calling __pskb_trim to signal that the skbuffs are owned and avoid the skb_condense path. Fixes: 52267790ef52 ("sock: add MSG_ZEROCOPY") Signed-off-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-22Merge branch 'bpf-range-marking-fixes'David S. Miller
Daniel Borkmann says: ==================== Two BPF fixes for range marking The set contains two fixes for direct packet access range markings and test cases for all direct packet access patterns that the verifier matches on. They are targeted for net tree, note that once net gets merged into net-next, there will be a minor merge conflict due to signature change of the function find_good_pkt_pointers() as well as data_meta patterns present in net-next tree. You can just add bool false to the data_meta patterns and I will follow-up with properly converting the patterns for data_meta in a similar way. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-22bpf: add test cases to bpf selftests to cover all access testsDaniel Borkmann
Lets add test cases to cover really all possible direct packet access tests for good/bad access cases so we keep tracking them. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-22bpf: fix pattern matches for direct packet accessDaniel Borkmann
Alexander had a test program with direct packet access, where the access test was in the form of data + X > data_end. In an unrelated change to the program LLVM decided to swap the branches and emitted code for the test in form of data + X <= data_end. We hadn't seen these being generated previously, thus verifier would reject the program. Therefore, fix up the verifier to detect all test cases, so we don't run into such issues in the future. Fixes: b4e432f1000a ("bpf: enable BPF_J{LT, LE, SLT, SLE} opcodes in verifier") Reported-by: Alexander Alemayhu <alexander@alemayhu.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-22bpf: fix off by one for range markings with L{T, E} patternsDaniel Borkmann
During review I noticed that the current logic for direct packet access marking in check_cond_jmp_op() has an off by one for the upper right range border when marking in find_good_pkt_pointers() with BPF_JLT and BPF_JLE. It's not really harmful given access up to pkt_end is always safe, but we should nevertheless correct the range marking before it becomes ABI. If pkt_data' denotes a pkt_data derived pointer (pkt_data + X), then for pkt_data' < pkt_end in the true branch as well as for pkt_end <= pkt_data' in the false branch we mark the range with X although it should really be X - 1 in these cases. For example, X could be pkt_end - pkt_data, then when testing for pkt_data' < pkt_end the verifier simulation cannot deduce that a byte load of pkt_data' - 1 would succeed in this branch. Fixes: b4e432f1000a ("bpf: enable BPF_J{LT, LE, SLT, SLE} opcodes in verifier") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-22bpf: devmap fix arithmetic overflow in bitmap_size calculationJohn Fastabend
An integer overflow is possible in dev_map_bitmap_size() when calculating the BITS_TO_LONG logic which becomes, after macro replacement, (((n) + (d) - 1)/ (d)) where 'n' is a __u32 and 'd' is (8 * sizeof(long)). To avoid overflow cast to u64 before arithmetic. Reported-by: Richard Weinberger <richard@nod.at> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-21Merge tag 'dmaengine-fix-4.14-rc6' of ↵Linus Torvalds
git://git.infradead.org/users/vkoul/slave-dma Pull dmaengine fix from Vinod Koul: "Late fix for altera driver which fixes the locking in driver" * tag 'dmaengine-fix-4.14-rc6' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: altera: Use IRQ-safe spinlock calls in the error paths as well
2017-10-21cpu/hotplug: Reset node state after operationThomas Gleixner
The recent rework of the cpu hotplug internals changed the usage of the per cpu state->node field, but missed to clean it up after usage. So subsequent hotplug operations use the stale pointer from a previous operation and hand it into the callback functions. The callbacks then dereference a pointer which either belongs to a different facility or points to freed and potentially reused memory. In either case data corruption and crashes are the obvious consequence. Reset the node and the last pointers in the per cpu state to NULL after the operation which set them has completed. Fixes: 96abb968549c ("smp/hotplug: Allow external multi-instance rollback") Reported-by: Tvrtko Ursulin <tursulin@ursulin.net> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1710211606130.3213@nanos
2017-10-21Merge branch 'aquantia-fixes'David S. Miller
Igor Russkikh says: ==================== net: aquantia: Atlantic driver 10/2017 updates This patchset fixes various issues in driver, improves parameters for better performance on 10Gbit link ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-21net: aquantia: Bad udp rate on default interrupt coalescingIgor Russkikh
Default Tx rates cause very long ISR delays on Tx. 0xff is 510us delay, giving only ~ 2000 interrupts per seconds for Tx rings cleanup. With these settings udp tx rate was never higher than ~800Mbps on a single stream. Changing min delay to 0xF makes it way better with ~6Gbps TCP stream performance is almost unaffected by this change, since LSO optimizations play important role. CPU load is affected insignificantly by this change. Signed-off-by: Pavel Belous <pavel.belous@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-21net: aquantia: Enable coalescing management via ethtool interfaceIgor Russkikh
Aquantia NIC allows both TX and RX interrupt throttle rate (ITR) management, but this was used in a very limited way via predefined values. This patch allows to setup ITR default values via module command line arguments and via standard ethtool coalescing settings. Signed-off-by: Pavel Belous <pavel.belous@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-21net: aquantia: mmio unmap was not performed on driver removalIgor Russkikh
That may lead to mmio resource leakage. Signed-off-by: Pavel Belous <pavel.belous@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-21net: aquantia: Limit number of MSIX irqs to the number of cpusIgor Russkikh
There is no much practical use from having MSIX vectors more that number of cpus, thus cap this first with preconfigured limit, then with number of cpus online. Signed-off-by: Pavel Belous <pavel.belous@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-21net: aquantia: Fixed transient link up/down/up notificationIgor Russkikh
When doing ifconfig down/up, driver did not reported carrier_off neither in nic_stop nor in nic_start. That caused link to be visible as "up" during couple of seconds immediately after "ifconfig up". Signed-off-by: Pavel Belous <pavel.belous@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-21net: aquantia: Add queue restarts stats counterIgor Russkikh
Queue stat strings are cleaned up, duplicate stat name strings removed, queue restarts counter added Signed-off-by: Pavel Belous <pavel.belous@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-21net: aquantia: Reset nic statistics on interface up/downIgor Russkikh
Internal statistics system on chip never gets reset until hardware reboot. This is quite inconvenient in terms of ethtool statistics usage. This patch implements incremental statistics update inside of service callback. Upon nic initialization, first request is done to fetch initial stat data, current collected stat data gets cleared. Internal statistics mailbox readout is improved to save space and increase readability Signed-off-by: Pavel Belous <pavel.belous@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-21android: binder: Fix null ptr dereference in debug msgSherry Yang
Don't access next->data in kernel debug message when the next buffer is null. Acked-by: Arve Hjønnevåg <arve@android.com> Signed-off-by: Sherry Yang <sherryy@android.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-21android: binder: Don't get mm from taskSherry Yang
Use binder_alloc struct's mm_struct rather than getting a reference to the mm struct through get_task_mm to avoid a potential deadlock between lru lock, task lock and dentry lock, since a thread can be holding the task lock and the dentry lock while trying to acquire the lru lock. Acked-by: Arve Hjønnevåg <arve@android.com> Signed-off-by: Sherry Yang <sherryy@android.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-21udp: make some messages more descriptiveMatteo Croce
In the UDP code there are two leftover error messages with very few meaning. Replace them with a more descriptive error message as some users reported them as "strange network error". Signed-off-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-21geneve: Fix function matching VNI and tunnel ID on big-endianStefano Brivio
On big-endian machines, functions converting between tunnel ID and VNI use the three LSBs of tunnel ID storage to map VNI. The comparison function eq_tun_id_and_vni(), on the other hand, attempted to map the VNI from the three MSBs. Fix it by using the same check implemented on LE, which maps VNI from the three LSBs of tunnel ID. Fixes: 2e0b26e10352 ("geneve: Optimize geneve device lookup.") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: Jakub Sitnicki <jkbs@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>