| Age | Commit message (Collapse) | Author |
|---|
|
If we want to avoid memory corruption
on incoherent architectures, buffers for DMA
must not reside
- on the stack
- embedded within other structures
Allocate them separately.
v2: fix uninitialized return value
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
set jpeg encode DMA bit mask to support 34bits
iova space(16GB) that the mt8186 iommu HW support.
Whole the iova range separate to 0~4G/4G~8G/8G~12G/12G~16G,
regarding which iova range jpgenc actually locate, it
depends on the dma-ranges property of vdec dtsi node.
Signed-off-by: kyrie wu <kyrie.wu@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Add mediatek,mt8186-jpgenc compatible to binding document.
MT8186 iommu support 0~16GB iova. We separate it to four banks:
0~4G; 4G~8G; 8G~12G; 12G~16G.
The "dma-ranges" could be used to adjust the bank we locate.
If we don't set this property. The default range always is 0~4G.
Signed-off-by: kyrie wu <kyrie.wu@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Use ida_alloc() and ida_free() instead of the deprecated
ida_simple_get() and ida_simple_remove().
Signed-off-by: keliu <liuke94@huawei.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
While the completion handler is running,
usb_unlink_urb() on yourself is a NOP. Remove it.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
During resume we must assume tat devices are
not ready for block IO. Use GFP_NOIO.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
It cannot fail. Make it void.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
During resume() GFP_NOIO is enough.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
During resume() GFP_NOIO will do.
No need for GFP_ATOMIC
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
No buffer can be embedded inside a descriptor, not even a simple be64.
Use a separate kmalloc()
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Unlinking yourself while the completion handler
is running is a NOP. Drop it.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Calling that on yourself while the completion handler
is running is a NOP. Remove it.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The driver uses a timer, that may submit the URB and
the URB may start the timer. No simple order of killing
can break te cycle. Poison the URB before killing
the timer.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The timer uses the URB. Free it only after the timer
has been stopped.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The coherency rules mean that you cannot embed
a buffer inside a descriptor. kmalloc() separately.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
In order to reduce decoder latency, enable H264 inner racing mode.
Send lat trans buffer information to core when trigger lat to work,
need not to wait until lat decode done.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
When SCP timeout during playing video, kernel crashes with following
message. It's caused by accessing NULL pointer in vpu_dec_ipi_handler.
This patch doesn't solve the root cause of NULL pointer, but merely
prevent kernel crashed when encounter the NULL pointer.
After applied this patch, kernel keeps alive, only the video player turns
to green screen.
[67242.065474] pc : vpu_dec_ipi_handler+0xa0/0xb20 [mtk_vcodec_dec]
[67242.065485] [MTK_V4L2] level=0 fops_vcodec_open(),334:
18000000.vcodec_dec decoder [135]
[67242.065523] lr : scp_ipi_handler+0x11c/0x244 [mtk_scp]
[67242.065540] sp : ffffffbb4207fb10
[67242.065557] x29: ffffffbb4207fb30 x28: ffffffd00a1d5000
[67242.065592] x27: 1ffffffa0143aa24 x26: 0000000000000000
[67242.065625] x25: dfffffd000000000 x24: ffffffd0168bfdb0
[67242.065659] x23: 1ffffff76840ff74 x22: ffffffbb41fa8a88
[67242.065692] x21: ffffffbb4207fb9c x20: ffffffbb4207fba0
[67242.065725] x19: ffffffbb4207fb98 x18: 0000000000000000
[67242.065758] x17: 0000000000000000 x16: ffffffd042022094
[67242.065791] x15: 1ffffff77ed4b71a x14: 1ffffff77ed4b719
[67242.065824] x13: 0000000000000000 x12: 0000000000000000
[67242.065857] x11: 0000000000000000 x10: dfffffd000000001
[67242.065890] x9 : 0000000000000000 x8 : 0000000000000002
[67242.065923] x7 : 0000000000000000 x6 : 000000000000003f
[67242.065956] x5 : 0000000000000040 x4 : ffffffffffffffe0
[67242.065989] x3 : ffffffd043b841b8 x2 : 0000000000000000
[67242.066021] x1 : 0000000000000010 x0 : 0000000000000010
[67242.066055] Call trace:
[67242.066092] vpu_dec_ipi_handler+0xa0/0xb20 [mtk_vcodec_dec
12220d230d83a7426fc38c56b3e7bc6066955bae]
[67242.066119] scp_ipi_handler+0x11c/0x244 [mtk_scp
8fb69c2ef141dd3192518b952b65aba35627b8bf]
[67242.066145] mt8192_scp_irq_handler+0x70/0x128 [mtk_scp
8fb69c2ef141dd3192518b952b65aba35627b8bf]
[67242.066172] scp_irq_handler+0xa0/0x114 [mtk_scp
8fb69c2ef141dd3192518b952b65aba35627b8bf]
[67242.066200] irq_thread_fn+0x84/0xf8
[67242.066220] irq_thread+0x170/0x1ec
[67242.066242] kthread+0x2f8/0x3b8
[67242.066264] ret_from_fork+0x10/0x30
[67242.066292] Code: 38f96908 35003628 91004340 d343fc08 (38f96908)
Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com>
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: Macpaul Lin <macpaul.lin@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Vp8 need to use MM21, but vp9 and h264 need to use HyFbc mode
for mt8195. Vp8/vp9/h264 use the same MM21 format for mt8192.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Adds compatible for mt8195 platform.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: Macpaul Lin <macpaul.lin@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Adds decoder dt-bindings for mt8195.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: Macpaul Lin <macpaul.lin@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Add lat soc compatible and to support lat soc power/clk helper.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
lat soc
Adds decoder dt-bindings for compatible "mediatek,mtk-vcodec-lat-soc".
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Add vp9 single core decode driver to support mt8186.
[hverkuil: fix 3 small checkpatch warnings]
Signed-off-by: Mingjia Zhang <mingjia.zhang@mediatek.com>
Signed-off-by: Xiaoyong Lu <xiaoyong.lu@mediatek.com>
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Document this new vivid test control.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
P010 is a YUV format with 10-bits per component with interleaved UV.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Acked-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Implement V4L2_CID_JPEG_COMPRESSION_QUALITY
to set jpeg quality
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Fix the following coccicheck warning:
drivers/media/platform/samsung/s5p-jpeg/jpeg-core.c:1712:24-25:
WARNING opportunity for max()
max() macro is defined in include/linux/minmax.h. It avoids multiple
evaluations of the arguments when non-constant and performs strict
type-checking.
Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
This bit is marked as reserved in the ADV Hardware Reference Manual.
Resetting this bit seems to cause increased video noise. Setting this
bit according to the Hardware Reference Manual reduces the video noise
immediately.
Signed-off-by: Benjamin Marty <info@benjaminmarty.ch>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
This is a very old driver for very old hardware and it is one of
the very few remaining that does not use the vb2 framework (or
even the older videobuf framework), so deprecate this driver
and move it to staging with the intent to removing it altogether
by the end of 2022.
If someone wants to keep this driver, then it has to be converted
to use vb2.
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
and f_chk_addr
The variables f_chk_len and f_chk_addr are being initialized to zero and
then being re-assigned in the next statement. The initializations are
redundant and can be removed. Also initialize s_chk_addr and s_chk_len
at the declaration statement.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
As there is no interface to power off vpu core.
So it need to boot from cold on first load.
but on the second load, driver need to restore the status
instead of booting.
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Eliminate the following coccicheck warning:
./drivers/media/platform/atmel/atmel-isc-base.c:1469:2-3: Unneeded
semicolon
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
clk_prepare_enable() already checks NULL by using !clk.
clk_disable_unprepare() already checks NULL by using IS_ERR_OR_NULL.
Remove unneeded NULL checks before them.
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Add PAL-Nc support to usbtv, the corresponding register value "0x00fe"
comes from the Windows driver "Active Development Co., Ltd. v2.1.1.2".
Signed-off-by: Jorge Maidana <jorgem.linux@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
* Fix PAL-Nc horizontal parameters according to DScaler:
https://github.com/JohnAdders/DScaler/blob/f7d92b76678e/DScaler/TVFormats.cpp#L88-L94
* Add PAL-Nc TV audio support.
* Tested with CVBS and RF on a Pinnacle PCTV HD 800i.
Signed-off-by: Jorge Maidana <jorgem.linux@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Add a vivid control to insert the HDMI Video Guard Band in the
image.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
This inserts 4 pixels of the RGB color 0xab55ab at the left hand side of
the image. This is only done for 3 or 4 byte RGB pixel formats. The HDMI
TMDS encoding of this pixel value equals the Video Guard Band value as
defined by HDMI (see section 5.2.2.1 in the HDMI 1.3 Specification) that
preceeds the first actual pixel of a video line. If an HDMI receiver
doesn't handle this correctly, then it might keep skipping these Video
Guard Band patterns and end up with a shorter video line. So this is a
nice pattern to test with.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
If there is a hardware problem such as someone pulling the CEC line low
continuously, then the POLL message will fail with an error other than
OK, NACK, ABORTED or TIMEOUT. Log the tx_status value in that case to
help debug this.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
When logging the infoframes the adv7604 driver stopped reading
infoframes at the first missing infoframe type. Instead it should
try all supported infoframe types.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
To simplify the driver's maintenance it makes sense to escape from
hardcoded numbers of power domain resources per platform and statical
allocation of the resources. For instance on a QCOM SM8450 platform
the number of CAMSS power domains shall be bumped up to 6, also notably
CAMSS on MSM8916 has only one power domain, however it expects to get 2,
and thus it should result in a runtime error on driver probe.
The change fixes an issue mentioned above and gives more flexibility
to support more platforms in future.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
of_graph_get_next_endpoint() returns an 'endpoint' node pointer
with refcount incremented. The refcount should be decremented
before returning from vpif_probe().
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The driver should disable the regulator when failing to probe.
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Acked-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Document the interconnect properties used in the Qualcomm CAMSS on
SDM660:
sdm630-sony-xperia-nile-discovery.dtb: camss@ca00000: 'interconnect-names', 'interconnects' do not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
'supplies' is a pointer, the real size of struct regulator_bulk_data
should be pass to devm_kmalloc_array().
Fixes: 0d8140179715 ("media: camss: Add regulator_bulk support")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
This replaces all of the dprintk macro calls with the zrdev_dbg,
zrdev_info, or zrdev_err calls as appropriate. This allows for the
removal of the dprintk macro from each file it is defined in, along with
the removal of module params that track the debugging level.
In the case that the debugging level was used in a comparison, this has
been replaced with checking the console level debugging and making a
decision from there. If the console debugging level is at least the
KERN_ debugging level equivalent, then the comparison will evaluate as
true.
There are a few instances where pr_debug must be used over the
zrdev_dbg. These occur in the module cleanup functions because there
should be no devices defined once we get here, so we don't have a device
to pass to zrdev_dbg.
Signed-off-by: Ian Cowan <ian@linux.cowan.aero>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
This replaces all of the pr_err calls to the preferred zrdev_err macro
that calls the dev_err macro. There are a few locations where the pr_err
is left because a zoran struct cannot be created. This is the result of
error handling for another struct's existence that is required to create
a zoran struct.
Signed-off-by: Ian Cowan <ian@linux.cowan.aero>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
This adds inline functions in the videocodec header file to convert the
videocodec and videocodec_master structs to their respective contained
zoran struct. This will be used to pass the zoran struct to the
zrdev_XXX() macros defined in the zoran header.
In the zoran header, the new include is added to ensure all variables
can be completely defined with the zoran and videocodec includes where
they are located.
Signed-off-by: Ian Cowan <ian@linux.cowan.aero>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
This adds the zrdev_dbg() (pointing to pci_dbg()), zrdev_err() (pointing
to pci_err()), and zrdev_info() (pointing to pci_info()) macros to the
zoran drivers. These are the preferred method for debugging and this
will allow to extract the device from the zoran struct to make the call.
Signed-off-by: Ian Cowan <ian@linux.cowan.aero>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
All warnings (new ones prefixed by >>):
>> drivers/media/platform/atmel/atmel-sama7g5-isc.c:610:34: warning: unused variable 'microchip_xisc_of_match' [-Wunused-const-variable]
static const struct of_device_id microchip_xisc_of_match[] = {
^
13 warnings generated.
vim +/microchip_xisc_of_match +610 drivers/media/platform/atmel/atmel-sama7g5-isc.c
609
> 610 static const struct of_device_id microchip_xisc_of_match[] = {
611 { .compatible = "microchip,sama7g5-isc" },
612 { }
613 };
614 MODULE_DEVICE_TABLE(of, microchip_xisc_of_match);
615
Fixed warning by guarding the atmel_isc_of_match by CONFIG_OF.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: c9aa973884a1 ("media: atmel: atmel-isc: add microchip-xisc driver")
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The core will fill this in v4l_fill_fmtdesc(),
ensuring consistent format description names.
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
