| Age | Commit message (Collapse) | Author |
|---|
|
drivers/net/phy/bcm7xxx.c
d88fd1b546ff ("net: phy: bcm7xxx: Fixed indirect MMD operations")
f68d08c437f9 ("net: phy: bcm7xxx: Add EPHY entry for 72165")
net/sched/sch_api.c
b193e15ac69d ("net: prevent user from passing illegal stab size")
69508d43334e ("net_sched: Use struct_size() and flex_array_size() helpers")
Both cases trivial - adjacent code additions.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes, including fixes from mac80211, netfilter and bpf.
Current release - regressions:
- bpf, cgroup: assign cgroup in cgroup_sk_alloc when called from
interrupt
- mdio: revert mechanical patches which broke handling of optional
resources
- dev_addr_list: prevent address duplication
Previous releases - regressions:
- sctp: break out if skb_header_pointer returns NULL in sctp_rcv_ootb
(NULL deref)
- Revert "mac80211: do not use low data rates for data frames with no
ack flag", fixing broadcast transmissions
- mac80211: fix use-after-free in CCMP/GCMP RX
- netfilter: include zone id in tuple hash again, minimize collisions
- netfilter: nf_tables: unlink table before deleting it (race -> UAF)
- netfilter: log: work around missing softdep backend module
- mptcp: don't return sockets in foreign netns
- sched: flower: protect fl_walk() with rcu (race -> UAF)
- ixgbe: fix NULL pointer dereference in ixgbe_xdp_setup
- smsc95xx: fix stalled rx after link change
- enetc: fix the incorrect clearing of IF_MODE bits
- ipv4: fix rtnexthop len when RTA_FLOW is present
- dsa: mv88e6xxx: 6161: use correct MAX MTU config method for this
SKU
- e100: fix length calculation & buffer overrun in ethtool::get_regs
Previous releases - always broken:
- mac80211: fix using stale frag_tail skb pointer in A-MSDU tx
- mac80211: drop frames from invalid MAC address in ad-hoc mode
- af_unix: fix races in sk_peer_pid and sk_peer_cred accesses (race
-> UAF)
- bpf, x86: Fix bpf mapping of atomic fetch implementation
- bpf: handle return value of BPF_PROG_TYPE_STRUCT_OPS prog
- netfilter: ip6_tables: zero-initialize fragment offset
- mhi: fix error path in mhi_net_newlink
- af_unix: return errno instead of NULL in unix_create1() when over
the fs.file-max limit
Misc:
- bpf: exempt CAP_BPF from checks against bpf_jit_limit
- netfilter: conntrack: make max chain length random, prevent
guessing buckets by attackers
- netfilter: nf_nat_masquerade: make async masq_inet6_event handling
generic, defer conntrack walk to work queue (prevent hogging RTNL
lock)"
* tag 'net-5.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (77 commits)
af_unix: fix races in sk_peer_pid and sk_peer_cred accesses
net: stmmac: fix EEE init issue when paired with EEE capable PHYs
net: dev_addr_list: handle first address in __hw_addr_add_ex
net: sched: flower: protect fl_walk() with rcu
net: introduce and use lock_sock_fast_nested()
net: phy: bcm7xxx: Fixed indirect MMD operations
net: hns3: disable firmware compatible features when uninstall PF
net: hns3: fix always enable rx vlan filter problem after selftest
net: hns3: PF enable promisc for VF when mac table is overflow
net: hns3: fix show wrong state when add existing uc mac address
net: hns3: fix mixed flag HCLGE_FLAG_MQPRIO_ENABLE and HCLGE_FLAG_DCB_ENABLE
net: hns3: don't rollback when destroy mqprio fail
net: hns3: remove tc enable checking
net: hns3: do not allow call hns3_nic_net_open repeatedly
ixgbe: Fix NULL pointer dereference in ixgbe_xdp_setup
net: bridge: mcast: Associate the seqcount with its protecting lock.
net: mdio-ipq4019: Fix the error for an optional regs resource
net: hns3: fix hclge_dbg_dump_tm_pg() stack usage
net: mdio: mscc-miim: Fix the mdio controller
af_unix: Return errno instead of NULL in unix_create1().
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
"A single fix for the gpio-pca953x driver and two commits updating the
MAINTAINERS entries for Mun Yew Tham (GPIO specific) and myself
(treewide after a change in professional situation).
Summary:
- don't ignore I2C errors in gpio-pca953x
- update MAINTAINERS entries for Mun Yew Tham and myself"
* tag 'gpio-fixes-for-v5.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
MAINTAINERS: Update Mun Yew Tham as Altera Pio Driver maintainer
MAINTAINERS: update my email address
gpio: pca953x: do not ignore i2c errors
|
|
Pull rdma fixes from Jason Gunthorpe:
"Not much too exciting here, although two syzkaller bugs that seem to
have 9 lives may have finally been squashed.
Several core bugs and a batch of driver bug fixes:
- Fix compilation problems in qib and hfi1
- Do not corrupt the joined multicast group state when using
SEND_ONLY
- Several CMA bugs, a reference leak for listening and two syzkaller
crashers
- Various bug fixes for irdma
- Fix a Sleeping while atomic bug in usnic
- Properly sanitize kernel pointers in dmesg
- Two bugs in the 64b CQE support for hns"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/hns: Add the check of the CQE size of the user space
RDMA/hns: Fix the size setting error when copying CQE in clean_cq()
RDMA/hfi1: Fix kernel pointer leak
RDMA/usnic: Lock VF with mutex instead of spinlock
RDMA/hns: Work around broken constant propagation in gcc 8
RDMA/cma: Ensure rdma_addr_cancel() happens before issuing more requests
RDMA/cma: Do not change route.addr.src_addr.ss_family
RDMA/irdma: Report correct WC error when there are MW bind errors
RDMA/irdma: Report correct WC error when transport retry counter is exceeded
RDMA/irdma: Validate number of CQ entries on create CQ
RDMA/irdma: Skip CQP ring during a reset
MAINTAINERS: Update Broadcom RDMA maintainers
RDMA/cma: Fix listener leak in rdma_cma_listen_on_all() failure
IB/cma: Do not send IGMP leaves for sendonly Multicast groups
IB/qib: Fix clang confusion of NULL pointer comparison
|
|
Jann Horn reported that SO_PEERCRED and SO_PEERGROUPS implementations
are racy, as af_unix can concurrently change sk_peer_pid and sk_peer_cred.
In order to fix this issue, this patch adds a new spinlock that needs
to be used whenever these fields are read or written.
Jann also pointed out that l2cap_sock_get_peer_pid_cb() is currently
reading sk->sk_peer_pid which makes no sense, as this field
is only possibly set by AF_UNIX sockets.
We will have to clean this in a separate patch.
This could be done by reverting b48596d1dc25 "Bluetooth: L2CAP: Add get_peer_pid callback"
or implementing what was truly expected.
Fixes: 109f6e39fa07 ("af_unix: Allow SO_PEERCRED to work across namespaces.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Jann Horn <jannh@google.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Eric Dumazet says:
====================
net: snmp: minor optimizations
Fetching many SNMP counters on hosts with large number of cpus
takes a lot of time. mptcp still uses the old non-batched
fashion which is not cache friendly.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Using snmp_get_cpu_field_batch() allows for better cpu cache
utilization, especially on hosts with large number of cpus.
Also remove special handling when mptcp mibs where not yet
allocated.
I chose to use temporary storage on the stack to keep this patch simple.
We might in the future use the storage allocated in netstat_seq_show().
Combined with prior patch (inlining snmp_get_cpu_field)
time to fetch and output mptcp counters on a 256 cpu host [1]
goes from 75 usec to 16 usec.
[1] L1 cache size is 32KB, it is not big enough to hold all dataset.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This trivial function is called ~90,000 times on 256 cpus hosts,
when reading /proc/net/netstat. And this number keeps inflating.
Inlining it saves many cycles.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add counters for XDP REDIRECT success and failure. This brings the
redirect path in line with metrics gathered via the other XDP paths.
Signed-off-by: Joshua Roys <roysjosh@gmail.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When STMMAC is paired with Energy-Efficient Ethernet(EEE) capable PHY,
and the PHY is advertising EEE by default, we need to enable EEE on the
xPCS side too, instead of having user to manually trigger the enabling
config via ethtool.
Fixed this by adding xpcs_config_eee() call in stmmac_eee_init().
Fixes: 7617af3d1a5e ("net: pcs: Introducing support for DWC xpcs Energy Efficient Ethernet")
Cc: Michael Sit Wei Hong <michael.wei.hong.sit@intel.com>
Signed-off-by: Wong Vee Khee <vee.khee.wong@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Originally, ixgbe driver doesn't allow the mounting of xdpdrv if the
server is equipped with more than 64 cpus online. So it turns out that
the loading of xdpdrv causes the "NOMEM" failure.
Actually, we can adjust the algorithm and then make it work through
mapping the current cpu to some xdp ring with the protect of @tx_lock.
Here are some numbers before/after applying this patch with xdp-example
loaded on the eth0X:
As client (tx path):
Before After
TCP_STREAM send-64 734.14 714.20
TCP_STREAM send-128 1401.91 1395.05
TCP_STREAM send-512 5311.67 5292.84
TCP_STREAM send-1k 9277.40 9356.22 (not stable)
TCP_RR send-1 22559.75 21844.22
TCP_RR send-128 23169.54 22725.13
TCP_RR send-512 21670.91 21412.56
As server (rx path):
Before After
TCP_STREAM send-64 1416.49 1383.12
TCP_STREAM send-128 3141.49 3055.50
TCP_STREAM send-512 9488.73 9487.44
TCP_STREAM send-1k 9491.17 9356.22 (not stable)
TCP_RR send-1 23617.74 23601.60
...
Notice: the TCP_RR mode is unstable as the official document explains.
I tested many times with different parameters combined through netperf.
Though the result is not that accurate, I cannot see much influence on
this patch. The static key is places on the hot path, but it actually
shouldn't cause a huge regression theoretically.
Co-developed-by: Shujin Li <lishujin@kuaishou.com>
Signed-off-by: Shujin Li <lishujin@kuaishou.com>
Signed-off-by: Jason Xing <xingwanli@kuaishou.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Wei Wang says:
====================
net: add new socket option SO_RESERVE_MEM
This patch series introduces a new socket option SO_RESERVE_MEM.
This socket option provides a mechanism for users to reserve a certain
amount of memory for the socket to use. When this option is set, kernel
charges the user specified amount of memory to memcg, as well as
sk_forward_alloc. This amount of memory is not reclaimable and is
available in sk_forward_alloc for this socket.
With this socket option set, the networking stack spends less cycles
doing forward alloc and reclaim, which should lead to better system
performance, with the cost of an amount of pre-allocated and
unreclaimable memory, even under memory pressure.
With a tcp_stream test with 10 flows running on a simulated 100ms RTT
link, I can see the cycles spent in __sk_mem_raise_allocated() dropping
by ~0.02%. Not a whole lot, since we already have logic in
sk_mem_uncharge() to only reclaim 1MB when sk_forward_alloc has more
than 2MB free space. But on a system suffering memory pressure
constently, the savings should be more.
The first patch is the implementation of this socket option. The
following 2 patches change the tcp stack to make use of this reserved
memory when under memory pressure. This makes the tcp stack behavior
more flexible when under memory pressure, and provides a way for user to
control the distribution of the memory among its sockets.
With a TCP connection on a simulated 100ms RTT link, the default
throughput under memory pressure is ~500Kbps. With SO_RESERVE_MEM set to
100KB, the throughput under memory pressure goes up to ~3.5Mbps.
Change since v2:
- Added description for new field added in struct sock in patch 1
Change since v1:
- Added performance stats in cover letter and rebased
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When user sets SO_RESERVE_MEM socket option, in order to utilize the
reserved memory when in memory pressure state, we adjust rcv_ssthresh
according to the available reserved memory for the socket, instead of
using 4 * advmss always.
Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If user sets SO_RESERVE_MEM socket option, in order to fully utilize the
reserved memory in memory pressure state on the tx path, we modify the
logic in sk_stream_moderate_sndbuf() to set sk_sndbuf according to
available reserved memory, instead of MIN_SOCK_SNDBUF, and adjust it
when new data is acked.
Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This socket option provides a mechanism for users to reserve a certain
amount of memory for the socket to use. When this option is set, kernel
charges the user specified amount of memory to memcg, as well as
sk_forward_alloc. This amount of memory is not reclaimable and is
available in sk_forward_alloc for this socket.
With this socket option set, the networking stack spends less cycles
doing forward alloc and reclaim, which should lead to better system
performance, with the cost of an amount of pre-allocated and
unreclaimable memory, even under memory pressure.
Note:
This socket option is only available when memory cgroup is enabled and we
require this reserved memory to be charged to the user's memcg. We hope
this could avoid mis-behaving users to abused this feature to reserve a
large amount on certain sockets and cause unfairness for others.
Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
struct dev_addr_list is used for device addresses, unicast addresses
and multicast addresses. The first of those needs special handling
of the main address - netdev->dev_addr points directly the data
of the entry and drivers write to it freely, so we can't maintain
it in the rbtree (for now, at least, to be fixed in net-next).
Current work around sprinkles special handling of the first
address on the list throughout the code but it missed the case
where address is being added. First address will not be visible
during subsequent adds.
Syzbot found a warning where unicast addresses are modified
without holding the rtnl lock, tl;dr is that team generates
the same modification multiple times, not necessarily when
right locks are held.
In the repro we have:
macvlan -> team -> veth
macvlan adds a unicast address to the team. Team then pushes
that address down to its memebers (veths). Next something unrelated
makes team sync member addrs again, and because of the bug
the addr entries get duplicated in the veths. macvlan gets
removed, removes its addr from team which removes only one
of the duplicated addresses from veths. This removal is done
under rtnl. Next syzbot uses iptables to add a multicast addr
to team (which does not hold rtnl lock). Team syncs veth addrs,
but because veths' unicast list still has the duplicate it will
also get sync, even though this update is intended for mc addresses.
Again, uc address updates need rtnl lock, boom.
Reported-by: syzbot+7a2ab2cdc14d134de553@syzkaller.appspotmail.com
Fixes: 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs with IPv6 addresses, performance of changing link state, attaching a VRF, changing an IPv6 address, etc. go down dramtically.")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support for the downshift tunable for the Marvell 88x3310 PHY.
Downshift is only usable with firmware 0.3.5.0 and later.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Patch that refactored fl_walk() to use idr_for_each_entry_continue_ul()
also removed rcu protection of individual filters which causes following
use-after-free when filter is deleted concurrently. Fix fl_walk() to obtain
rcu read lock while iterating and taking the filter reference and temporary
release the lock while calling arg->fn() callback that can sleep.
KASAN trace:
[ 352.773640] ==================================================================
[ 352.775041] BUG: KASAN: use-after-free in fl_walk+0x159/0x240 [cls_flower]
[ 352.776304] Read of size 4 at addr ffff8881c8251480 by task tc/2987
[ 352.777862] CPU: 3 PID: 2987 Comm: tc Not tainted 5.15.0-rc2+ #2
[ 352.778980] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[ 352.781022] Call Trace:
[ 352.781573] dump_stack_lvl+0x46/0x5a
[ 352.782332] print_address_description.constprop.0+0x1f/0x140
[ 352.783400] ? fl_walk+0x159/0x240 [cls_flower]
[ 352.784292] ? fl_walk+0x159/0x240 [cls_flower]
[ 352.785138] kasan_report.cold+0x83/0xdf
[ 352.785851] ? fl_walk+0x159/0x240 [cls_flower]
[ 352.786587] kasan_check_range+0x145/0x1a0
[ 352.787337] fl_walk+0x159/0x240 [cls_flower]
[ 352.788163] ? fl_put+0x10/0x10 [cls_flower]
[ 352.789007] ? __mutex_unlock_slowpath.constprop.0+0x220/0x220
[ 352.790102] tcf_chain_dump+0x231/0x450
[ 352.790878] ? tcf_chain_tp_delete_empty+0x170/0x170
[ 352.791833] ? __might_sleep+0x2e/0xc0
[ 352.792594] ? tfilter_notify+0x170/0x170
[ 352.793400] ? __mutex_unlock_slowpath.constprop.0+0x220/0x220
[ 352.794477] tc_dump_tfilter+0x385/0x4b0
[ 352.795262] ? tc_new_tfilter+0x1180/0x1180
[ 352.796103] ? __mod_node_page_state+0x1f/0xc0
[ 352.796974] ? __build_skb_around+0x10e/0x130
[ 352.797826] netlink_dump+0x2c0/0x560
[ 352.798563] ? netlink_getsockopt+0x430/0x430
[ 352.799433] ? __mutex_unlock_slowpath.constprop.0+0x220/0x220
[ 352.800542] __netlink_dump_start+0x356/0x440
[ 352.801397] rtnetlink_rcv_msg+0x3ff/0x550
[ 352.802190] ? tc_new_tfilter+0x1180/0x1180
[ 352.802872] ? rtnl_calcit.isra.0+0x1f0/0x1f0
[ 352.803668] ? tc_new_tfilter+0x1180/0x1180
[ 352.804344] ? _copy_from_iter_nocache+0x800/0x800
[ 352.805202] ? kasan_set_track+0x1c/0x30
[ 352.805900] netlink_rcv_skb+0xc6/0x1f0
[ 352.806587] ? rht_deferred_worker+0x6b0/0x6b0
[ 352.807455] ? rtnl_calcit.isra.0+0x1f0/0x1f0
[ 352.808324] ? netlink_ack+0x4d0/0x4d0
[ 352.809086] ? netlink_deliver_tap+0x62/0x3d0
[ 352.809951] netlink_unicast+0x353/0x480
[ 352.810744] ? netlink_attachskb+0x430/0x430
[ 352.811586] ? __alloc_skb+0xd7/0x200
[ 352.812349] netlink_sendmsg+0x396/0x680
[ 352.813132] ? netlink_unicast+0x480/0x480
[ 352.813952] ? __import_iovec+0x192/0x210
[ 352.814759] ? netlink_unicast+0x480/0x480
[ 352.815580] sock_sendmsg+0x6c/0x80
[ 352.816299] ____sys_sendmsg+0x3a5/0x3c0
[ 352.817096] ? kernel_sendmsg+0x30/0x30
[ 352.817873] ? __ia32_sys_recvmmsg+0x150/0x150
[ 352.818753] ___sys_sendmsg+0xd8/0x140
[ 352.819518] ? sendmsg_copy_msghdr+0x110/0x110
[ 352.820402] ? ___sys_recvmsg+0xf4/0x1a0
[ 352.821110] ? __copy_msghdr_from_user+0x260/0x260
[ 352.821934] ? _raw_spin_lock+0x81/0xd0
[ 352.822680] ? __handle_mm_fault+0xef3/0x1b20
[ 352.823549] ? rb_insert_color+0x2a/0x270
[ 352.824373] ? copy_page_range+0x16b0/0x16b0
[ 352.825209] ? perf_event_update_userpage+0x2d0/0x2d0
[ 352.826190] ? __fget_light+0xd9/0xf0
[ 352.826941] __sys_sendmsg+0xb3/0x130
[ 352.827613] ? __sys_sendmsg_sock+0x20/0x20
[ 352.828377] ? do_user_addr_fault+0x2c5/0x8a0
[ 352.829184] ? fpregs_assert_state_consistent+0x52/0x60
[ 352.830001] ? exit_to_user_mode_prepare+0x32/0x160
[ 352.830845] do_syscall_64+0x35/0x80
[ 352.831445] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 352.832331] RIP: 0033:0x7f7bee973c17
[ 352.833078] Code: 0c 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10
[ 352.836202] RSP: 002b:00007ffcbb368e28 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
[ 352.837524] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f7bee973c17
[ 352.838715] RDX: 0000000000000000 RSI: 00007ffcbb368e50 RDI: 0000000000000003
[ 352.839838] RBP: 00007ffcbb36d090 R08: 00000000cea96d79 R09: 00007f7beea34a40
[ 352.841021] R10: 00000000004059bb R11: 0000000000000246 R12: 000000000046563f
[ 352.842208] R13: 0000000000000000 R14: 0000000000000000 R15: 00007ffcbb36d088
[ 352.843784] Allocated by task 2960:
[ 352.844451] kasan_save_stack+0x1b/0x40
[ 352.845173] __kasan_kmalloc+0x7c/0x90
[ 352.845873] fl_change+0x282/0x22db [cls_flower]
[ 352.846696] tc_new_tfilter+0x6cf/0x1180
[ 352.847493] rtnetlink_rcv_msg+0x471/0x550
[ 352.848323] netlink_rcv_skb+0xc6/0x1f0
[ 352.849097] netlink_unicast+0x353/0x480
[ 352.849886] netlink_sendmsg+0x396/0x680
[ 352.850678] sock_sendmsg+0x6c/0x80
[ 352.851398] ____sys_sendmsg+0x3a5/0x3c0
[ 352.852202] ___sys_sendmsg+0xd8/0x140
[ 352.852967] __sys_sendmsg+0xb3/0x130
[ 352.853718] do_syscall_64+0x35/0x80
[ 352.854457] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 352.855830] Freed by task 7:
[ 352.856421] kasan_save_stack+0x1b/0x40
[ 352.857139] kasan_set_track+0x1c/0x30
[ 352.857854] kasan_set_free_info+0x20/0x30
[ 352.858609] __kasan_slab_free+0xed/0x130
[ 352.859348] kfree+0xa7/0x3c0
[ 352.859951] process_one_work+0x44d/0x780
[ 352.860685] worker_thread+0x2e2/0x7e0
[ 352.861390] kthread+0x1f4/0x220
[ 352.862022] ret_from_fork+0x1f/0x30
[ 352.862955] Last potentially related work creation:
[ 352.863758] kasan_save_stack+0x1b/0x40
[ 352.864378] kasan_record_aux_stack+0xab/0xc0
[ 352.865028] insert_work+0x30/0x160
[ 352.865617] __queue_work+0x351/0x670
[ 352.866261] rcu_work_rcufn+0x30/0x40
[ 352.866917] rcu_core+0x3b2/0xdb0
[ 352.867561] __do_softirq+0xf6/0x386
[ 352.868708] Second to last potentially related work creation:
[ 352.869779] kasan_save_stack+0x1b/0x40
[ 352.870560] kasan_record_aux_stack+0xab/0xc0
[ 352.871426] call_rcu+0x5f/0x5c0
[ 352.872108] queue_rcu_work+0x44/0x50
[ 352.872855] __fl_put+0x17c/0x240 [cls_flower]
[ 352.873733] fl_delete+0xc7/0x100 [cls_flower]
[ 352.874607] tc_del_tfilter+0x510/0xb30
[ 352.886085] rtnetlink_rcv_msg+0x471/0x550
[ 352.886875] netlink_rcv_skb+0xc6/0x1f0
[ 352.887636] netlink_unicast+0x353/0x480
[ 352.888285] netlink_sendmsg+0x396/0x680
[ 352.888942] sock_sendmsg+0x6c/0x80
[ 352.889583] ____sys_sendmsg+0x3a5/0x3c0
[ 352.890311] ___sys_sendmsg+0xd8/0x140
[ 352.891019] __sys_sendmsg+0xb3/0x130
[ 352.891716] do_syscall_64+0x35/0x80
[ 352.892395] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 352.893666] The buggy address belongs to the object at ffff8881c8251000
which belongs to the cache kmalloc-2k of size 2048
[ 352.895696] The buggy address is located 1152 bytes inside of
2048-byte region [ffff8881c8251000, ffff8881c8251800)
[ 352.897640] The buggy address belongs to the page:
[ 352.898492] page:00000000213bac35 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1c8250
[ 352.900110] head:00000000213bac35 order:3 compound_mapcount:0 compound_pincount:0
[ 352.901541] flags: 0x2ffff800010200(slab|head|node=0|zone=2|lastcpupid=0x1ffff)
[ 352.902908] raw: 002ffff800010200 0000000000000000 dead000000000122 ffff888100042f00
[ 352.904391] raw: 0000000000000000 0000000000080008 00000001ffffffff 0000000000000000
[ 352.905861] page dumped because: kasan: bad access detected
[ 352.907323] Memory state around the buggy address:
[ 352.908218] ffff8881c8251380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 352.909471] ffff8881c8251400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 352.910735] >ffff8881c8251480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 352.912012] ^
[ 352.912642] ffff8881c8251500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 352.913919] ffff8881c8251580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[ 352.915185] ==================================================================
Fixes: d39d714969cd ("idr: introduce idr_for_each_entry_continue_ul()")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Acked-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The variable pin is being initialized with a value that is never
read, it is being updated later on in only one case of a switch
statement. The assignment is redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The macb PTP support currently implements the `gettime64` callback to allow
to retrieve the hardware clock time. Update the implementation to provide
the `gettimex64` callback instead.
The difference between the two is that with `gettime64` a snapshot of the
system clock is taken before and after invoking the callback. Whereas
`gettimex64` expects the callback itself to take the snapshots.
To get the time from the macb Ethernet core multiple register accesses have
to be done. Only one of which will happen at the time reported by the
function. This leads to a non-symmetric delay and adds a slight offset
between the hardware and system clock time when using the `gettime64`
method. This offset can be a few 100 nanoseconds. Switching to the
`gettimex64` method allows for a more precise correlation of the hardware
and system clocks and results in a lower offset between the two.
On a Xilinx ZynqMP system `phc2sys` reports a delay of 1120 ns before and
300 ns after the patch. With the latter being mostly symmetric.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The following flower filter fails to match non-PPP_IP{V6} packets
wrapped in PPP_SES protocol:
tc filter add dev eth0 ingress protocol ppp_ses flower \
action simple sdata hi64
The reason is that proto local variable is being set even when
FLOW_DISSECT_RET_OUT_BAD status is returned.
The fix is to avoid setting proto variable if the PPP protocol is unknown.
Signed-off-by: Boris Sukholitko <boris.sukholitko@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We added a state variable to track whether a certain port
was VLAN filtering or not, but we can just inquire the DSA
core about this.
Cc: Vladimir Oltean <olteanv@gmail.com>
Cc: Mauri Sandberg <sandberg@mailfence.com>
Cc: DENG Qingfang <dqfext@gmail.com>
Cc: Alvin Šipraga <alsi@bang-olufsen.dk>
Cc: Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Syzkaller reported a false positive deadlock involving
the nl socket lock and the subflow socket lock:
MPTCP: kernel_bind error, err=-98
============================================
WARNING: possible recursive locking detected
5.15.0-rc1-syzkaller #0 Not tainted
--------------------------------------------
syz-executor998/6520 is trying to acquire lock:
ffff8880795718a0 (k-sk_lock-AF_INET){+.+.}-{0:0}, at: mptcp_close+0x267/0x7b0 net/mptcp/protocol.c:2738
but task is already holding lock:
ffff8880787c8c60 (k-sk_lock-AF_INET){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1612 [inline]
ffff8880787c8c60 (k-sk_lock-AF_INET){+.+.}-{0:0}, at: mptcp_close+0x23/0x7b0 net/mptcp/protocol.c:2720
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(k-sk_lock-AF_INET);
lock(k-sk_lock-AF_INET);
*** DEADLOCK ***
May be due to missing lock nesting notation
3 locks held by syz-executor998/6520:
#0: ffffffff8d176c50 (cb_lock){++++}-{3:3}, at: genl_rcv+0x15/0x40 net/netlink/genetlink.c:802
#1: ffffffff8d176d08 (genl_mutex){+.+.}-{3:3}, at: genl_lock net/netlink/genetlink.c:33 [inline]
#1: ffffffff8d176d08 (genl_mutex){+.+.}-{3:3}, at: genl_rcv_msg+0x3e0/0x580 net/netlink/genetlink.c:790
#2: ffff8880787c8c60 (k-sk_lock-AF_INET){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1612 [inline]
#2: ffff8880787c8c60 (k-sk_lock-AF_INET){+.+.}-{0:0}, at: mptcp_close+0x23/0x7b0 net/mptcp/protocol.c:2720
stack backtrace:
CPU: 1 PID: 6520 Comm: syz-executor998 Not tainted 5.15.0-rc1-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
print_deadlock_bug kernel/locking/lockdep.c:2944 [inline]
check_deadlock kernel/locking/lockdep.c:2987 [inline]
validate_chain kernel/locking/lockdep.c:3776 [inline]
__lock_acquire.cold+0x149/0x3ab kernel/locking/lockdep.c:5015
lock_acquire kernel/locking/lockdep.c:5625 [inline]
lock_acquire+0x1ab/0x510 kernel/locking/lockdep.c:5590
lock_sock_fast+0x36/0x100 net/core/sock.c:3229
mptcp_close+0x267/0x7b0 net/mptcp/protocol.c:2738
inet_release+0x12e/0x280 net/ipv4/af_inet.c:431
__sock_release net/socket.c:649 [inline]
sock_release+0x87/0x1b0 net/socket.c:677
mptcp_pm_nl_create_listen_socket+0x238/0x2c0 net/mptcp/pm_netlink.c:900
mptcp_nl_cmd_add_addr+0x359/0x930 net/mptcp/pm_netlink.c:1170
genl_family_rcv_msg_doit+0x228/0x320 net/netlink/genetlink.c:731
genl_family_rcv_msg net/netlink/genetlink.c:775 [inline]
genl_rcv_msg+0x328/0x580 net/netlink/genetlink.c:792
netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2504
genl_rcv+0x24/0x40 net/netlink/genetlink.c:803
netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline]
netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1340
netlink_sendmsg+0x86d/0xdb0 net/netlink/af_netlink.c:1929
sock_sendmsg_nosec net/socket.c:704 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:724
sock_no_sendpage+0x101/0x150 net/core/sock.c:2980
kernel_sendpage.part.0+0x1a0/0x340 net/socket.c:3504
kernel_sendpage net/socket.c:3501 [inline]
sock_sendpage+0xe5/0x140 net/socket.c:1003
pipe_to_sendpage+0x2ad/0x380 fs/splice.c:364
splice_from_pipe_feed fs/splice.c:418 [inline]
__splice_from_pipe+0x43e/0x8a0 fs/splice.c:562
splice_from_pipe fs/splice.c:597 [inline]
generic_splice_sendpage+0xd4/0x140 fs/splice.c:746
do_splice_from fs/splice.c:767 [inline]
direct_splice_actor+0x110/0x180 fs/splice.c:936
splice_direct_to_actor+0x34b/0x8c0 fs/splice.c:891
do_splice_direct+0x1b3/0x280 fs/splice.c:979
do_sendfile+0xae9/0x1240 fs/read_write.c:1249
__do_sys_sendfile64 fs/read_write.c:1314 [inline]
__se_sys_sendfile64 fs/read_write.c:1300 [inline]
__x64_sys_sendfile64+0x1cc/0x210 fs/read_write.c:1300
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f215cb69969
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 e1 14 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffc96bb3868 EFLAGS: 00000246 ORIG_RAX: 0000000000000028
RAX: ffffffffffffffda RBX: 00007f215cbad072 RCX: 00007f215cb69969
RDX: 0000000000000000 RSI: 0000000000000004 RDI: 0000000000000005
RBP: 0000000000000000 R08: 00007ffc96bb3a08 R09: 00007ffc96bb3a08
R10: 0000000100000002 R11: 0000000000000246 R12: 00007ffc96bb387c
R13: 431bde82d7b634db R14: 0000000000000000 R15: 0000000000000000
the problem originates from uncorrect lock annotation in the mptcp
code and is only visible since commit 2dcb96bacce3 ("net: core: Correct
the sock::sk_lock.owned lockdep annotations"), but is present since
the port-based endpoint support initial implementation.
This patch addresses the issue introducing a nested variant of
lock_sock_fast() and using it in the relevant code path.
Fixes: 1729cf186d8a ("mptcp: create the listening socket for new port")
Fixes: 2dcb96bacce3 ("net: core: Correct the sock::sk_lock.owned lockdep annotations")
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Reported-and-tested-by: syzbot+1dd53f7a89b299d59eaf@syzkaller.appspotmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Adds XDP_PASS, XDP_TX, XDP_DROP and XDP_REDIRECT support
for netdev PF.
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In case of ltype NPC_LT_LA_CPT_HDR, LA pointer is pointing to the
start of cpt parse header. Since cpt parse header has veriable
length padding, this will be a problem for DMAC extraction. Adding
KPU profile changes to adjust the LA pointer to start at ether header
in case of cpt parse header by
- Adding ptr advance in pkind 58 to a fixed value 40
- Adding variable length offset 7 and mask 7 (pad len in
CPT_PARSE_HDR).
Also added the missing static declaration for npc_set_var_len_offset_pkind
function.
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Make use of the struct_size() and flex_array_size() helpers instead of
an open-coded version, in order to avoid any potential type mistakes
or integer overflows that, in the worse scenario, could lead to heap
overflows.
Link: https://github.com/KSPP/linux/issues/160
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20210928193107.GA262595@embeddedor
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Update Altera Pio Driver maintainer's email from <joyce.ooi@intel.com> to <mun.yew.tham@intel.com>
Signed-off-by: Mun Yew Tham <mun.yew.tham@intel.com>
Acked-by: Joyce Ooi <joyce.ooi@intel.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
|
|
My professional situation changes soon. Update my email address.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
|
|
Per gpio_chip interface, error shall be proparated to the caller.
Attempt to silent diagnostics by returning zero (as written in the
comment) is plain wrong, because the zero return can be interpreted by
the caller as the gpio value.
Cc: stable@vger.kernel.org
Signed-off-by: Andrey Gusakov <andrey.gusakov@cogentembedded.com>
Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
|
|
The commit mentioned in Fixes line missed a couple of notifications that
were registered before devlink_register() and should be delayed too.
As such, the too early placed WARN_ON() check spotted it.
WARNING: CPU: 1 PID: 6540 at net/core/devlink.c:5158 devlink_nl_region_notify+0x184/0x1e0 net/core/devlink.c:5158
Modules linked in:
CPU: 1 PID: 6540 Comm: syz-executor.0 Not tainted 5.15.0-rc2-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:devlink_nl_region_notify+0x184/0x1e0 net/core/devlink.c:5158
Code: 38 41 b8 c0 0c 00 00 31 d2 48 89 ee 4c 89 e7 e8 72 1a 26 00 48 83 c4 08 5b 5d 41 5c 41 5d 41 5e e9 01 bd 41 fa
e8 fc bc 41 fa <0f> 0b e9 f7 fe ff ff e8 f0 bc 41 fa 0f 0b eb da 4c 89 e7 e8 c4 18
RSP: 0018:ffffc90002d6f658 EFLAGS: 00010293
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: ffff88801f08d580 RSI: ffffffff87344e94 RDI: 0000000000000003
RBP: ffff88801ee42100 R08: 0000000000000000 R09: 0000000000000000
R10: ffffffff87344d8a R11: 0000000000000000 R12: ffff88801c1dc000
R13: 0000000000000000 R14: 000000000000002c R15: ffff88801c1dc070
FS: 0000555555e8e400(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055dd7c590310 CR3: 0000000069a09000 CR4: 00000000003506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
devlink_region_create+0x39f/0x4c0 net/core/devlink.c:10327
nsim_dev_dummy_region_init drivers/net/netdevsim/dev.c:481 [inline]
nsim_dev_probe+0x5f6/0x1150 drivers/net/netdevsim/dev.c:1479
call_driver_probe drivers/base/dd.c:517 [inline]
really_probe+0x245/0xcc0 drivers/base/dd.c:596
__driver_probe_device+0x338/0x4d0 drivers/base/dd.c:751
driver_probe_device+0x4c/0x1a0 drivers/base/dd.c:781
__device_attach_driver+0x20b/0x2f0 drivers/base/dd.c:898
bus_for_each_drv+0x15f/0x1e0 drivers/base/bus.c:427
__device_attach+0x228/0x4a0 drivers/base/dd.c:969
bus_probe_device+0x1e4/0x290 drivers/base/bus.c:487
device_add+0xc35/0x21b0 drivers/base/core.c:3359
nsim_bus_dev_new drivers/net/netdevsim/bus.c:435 [inline]
new_device_store+0x48b/0x770 drivers/net/netdevsim/bus.c:302
bus_attr_store+0x72/0xa0 drivers/base/bus.c:122
sysfs_kf_write+0x110/0x160 fs/sysfs/file.c:139
kernfs_fop_write_iter+0x342/0x500 fs/kernfs/file.c:296
call_write_iter include/linux/fs.h:2163 [inline]
new_sync_write+0x429/0x660 fs/read_write.c:507
vfs_write+0x7cf/0xae0 fs/read_write.c:594
ksys_write+0x12d/0x250 fs/read_write.c:647
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f328409d3ef
Code: 89 54 24 18 48 89 74 24 10 89 7c 24 08 e8 99 fd ff ff 48 8b 54 24 18 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 01
00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 31 44 89 c7 48 89 44 24 08 e8 cc fd ff ff 48
RSP: 002b:00007ffdc6851140 EFLAGS: 00000293 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f328409d3ef
RDX: 0000000000000003 RSI: 00007ffdc6851190 RDI: 0000000000000004
RBP: 0000000000000004 R08: 0000000000000000 R09: 00007ffdc68510e0
R10: 0000000000000000 R11: 0000000000000293 R12: 00007f3284144971
R13: 00007ffdc6851190 R14: 0000000000000000 R15: 00007ffdc6851860
Fixes: cf530217408e ("devlink: Notify users when objects are accessible")
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/2ed1159291f2a589b013914f2b60d8172fc525c1.1632925030.git.leonro@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"This became a slightly large collection of changes, partly because
I've been off in the last weeks. Most of changes are small and
scattered while a bit big change is found in HD-audio Realtek codec
driver; it's a very device-specific fix that has been long wanted, so
I decided to pick up although it's in the middle RC.
Some highlights:
- A new guard ioctl for ALSA rawmidi API to avoid the misuse of the
new timestamp framing mode; it's for a regression fix
- HD-audio: a revert of the 5.15 change that might work badly, new
quirks for Lenovo Legion & co, a follow-up fix for CS8409
- ASoC: lots of SOF-related fixes, fsl component fixes, corrections
of mediatek drivers
- USB-audio: fix for the PM resume
- FireWire: oxfw and motu fixes"
* tag 'sound-5.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (25 commits)
ALSA: pcsp: Make hrtimer forwarding more robust
ALSA: rawmidi: introduce SNDRV_RAWMIDI_IOCTL_USER_PVERSION
ALSA: firewire-motu: fix truncated bytes in message tracepoints
ASoC: SOF: trace: Omit error print when waking up trace sleepers
ASoC: mediatek: mt8195: remove wrong fixup assignment on HDMITX
ASoC: SOF: loader: Re-phrase the missing firmware error to avoid duplication
ASoC: SOF: loader: release_firmware() on load failure to avoid batching
ALSA: hda/cs8409: Setup Dolphin Headset Mic as Phantom Jack
ALSA: pcxhr: "fix" PCXHR_REG_TO_PORT definition
ASoC: SOF: imx: imx8m: Bar index is only valid for IRAM and SRAM types
ASoC: SOF: imx: imx8: Bar index is only valid for IRAM and SRAM types
ASoC: SOF: Fix DSP oops stack dump output contents
ALSA: hda/realtek: Quirks to enable speaker output for Lenovo Legion 7i 15IMHG05, Yoga 7i 14ITL5/15ITL5, and 13s Gen2 laptops.
ALSA: usb-audio: Unify mixer resume and reset_resume procedure
Revert "ALSA: hda: Drop workaround for a hang at shutdown again"
ALSA: oxfw: fix transmission method for Loud models based on OXFW971
ASoC: mediatek: common: handle NULL case in suspend/resume function
ASoC: fsl_xcvr: register platform component before registering cpu dai
ASoC: fsl_spdif: register platform component before registering cpu dai
ASoC: fsl_micfil: register platform component before registering cpu dai
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
"This contains fixes for a resource leak in ccp as well as stack
corruption in x86/sm4"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: x86/sm4 - Fix frame pointer stack corruption
crypto: ccp - fix resource leaks in ccp_run_aes_gcm_cmd()
|
|
Use 2-factor argument form kvcalloc() instead of kvzalloc().
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
datagram.c hasn't use any macro or function declared in linux/ip.h.
Thus, these files can be removed from datagram.c safely without
affecting the compilation of the net/ipv4 module
Signed-off-by: Mianhan Liu <liumh1@shanghaitech.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
tag_ksz.c hasn't use any macro or function declared in linux/slab.h.
Thus, these files can be removed from tag_ksz.c safely without
affecting the compilation of the ./net/dsa module
Signed-off-by: Mianhan Liu <liumh1@shanghaitech.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
tag_8021q.c hasn't use any macro or function declared in linux/if_bridge.h.
Thus, these files can be removed from tag_8021q.c safely without
affecting the compilation of the ./net/dsa module
Signed-off-by: Mianhan Liu <liumh1@shanghaitech.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When EEE support was added to the 28nm EPHY it was assumed that it would
be able to support the standard clause 45 over clause 22 register access
method. It turns out that the PHY does not support that, which is the
very reason for using the indirect shadow mode 2 bank 3 access method.
Implement {read,write}_mmd to allow the standard PHY library routines
pertaining to EEE querying and configuration to work correctly on these
PHYs. This forces us to implement a __phy_set_clr_bits() function that
does not grab the MDIO bus lock since the PHY driver's {read,write}_mmd
functions are always called with that lock held.
Fixes: 83ee102a6998 ("net: phy: bcm7xxx: add support for 28nm EPHY")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use array_size() helper instead of the open-coded version in
copy_to_user(). These sorts of multiplication factors need
to be wrapped in array_size().
Link: https://github.com/KSPP/linux/issues/160
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use array_size() helper instead of the open-coded version in
copy_to_user(). These sorts of multiplication factors need
to be wrapped in array_size().
Link: https://github.com/KSPP/linux/issues/160
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use array_size() helper instead of the open-coded version in
copy_{from,to}_user(). These sorts of multiplication factors
need to be wrapped in array_size().
Link: https://github.com/KSPP/linux/issues/160
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Guangbin Huang says:
====================
net: hns3: add some fixes for -net
This series adds some fixes for the HNS3 ethernet driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, the firmware compatible features are enabled in PF driver
initialization process, but they are not disabled in PF driver
deinitialization process and firmware keeps these features in enabled
status.
In this case, if load an old PF driver (for example, in VM) which not
support the firmware compatible features, firmware will still send mailbox
message to PF when link status changed and PF will print
"un-supported mailbox message, code = 201".
To fix this problem, disable these firmware compatible features in PF
driver deinitialization process.
Fixes: ed8fb4b262ae ("net: hns3: add link change event report")
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, the rx vlan filter will always be disabled before selftest and
be enabled after selftest as the rx vlan filter feature is fixed on in
old device earlier than V3.
However, this feature is not fixed in some new devices and it can be
disabled by user. In this case, it is wrong if rx vlan filter is enabled
after selftest. So fix it.
Fixes: bcc26e8dc432 ("net: hns3: remove unused code in hns3_self_test()")
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If unicast mac address table is full, and user add a new mac address, the
unicast promisc needs to be enabled for the new unicast mac address can be
used. So does the multicast promisc.
Now this feature has been implemented for PF, and VF should be implemented
too. When the mac table of VF is overflow, PF will enable promisc for this
VF.
Fixes: 1e6e76101fd9 ("net: hns3: configure promisc mode for VF asynchronously")
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, if function adds an existing unicast mac address, eventhough
driver will not add this address into hardware, but it will return 0 in
function hclge_add_uc_addr_common(). It will cause the state of this
unicast mac address is ACTIVE in driver, but it should be in TO-ADD state.
To fix this problem, function hclge_add_uc_addr_common() returns -EEXIST
if mac address is existing, and delete two error log to avoid printing
them all the time after this modification.
Fixes: 72110b567479 ("net: hns3: return 0 and print warning when hit duplicate MAC")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
HCLGE_FLAG_MQPRIO_ENABLE is supposed to set when enable
multiple TCs with tc mqprio, and HCLGE_FLAG_DCB_ENABLE is
supposed to set when enable multiple TCs with ets. But
the driver mixed the flags when updating the tm configuration.
Furtherly, PFC should be available when HCLGE_FLAG_MQPRIO_ENABLE
too, so remove the unnecessary limitation.
Fixes: 5a5c90917467 ("net: hns3: add support for tc mqprio offload")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
For destroy mqprio is irreversible in stack, so it's unnecessary
to rollback the tc configuration when destroy mqprio failed.
Otherwise, it may cause the configuration being inconsistent
between driver and netstack.
As the failure is usually caused by reset, and the driver will
restore the configuration after reset, so it can keep the
configuration being consistent between driver and hardware.
Fixes: 5a5c90917467 ("net: hns3: add support for tc mqprio offload")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, in function hns3_nic_set_real_num_queue(), the
driver doesn't report the queue count and offset for disabled
tc. If user enables multiple TCs, but only maps user
priorities to partial of them, it may cause the queue range
of the unmapped TC being displayed abnormally.
Fix it by removing the tc enable checking, ensure the queue
count is not zero.
With this change, the tc_en is useless now, so remove it.
Fixes: a75a8efa00c5 ("net: hns3: Fix tc setup when netdev is first up")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
hns3_nic_net_open() is not allowed to called repeatly, but there
is no checking for this. When doing device reset and setup tc
concurrently, there is a small oppotunity to call hns3_nic_net_open
repeatedly, and cause kernel bug by calling napi_enable twice.
The calltrace information is like below:
[ 3078.222780] ------------[ cut here ]------------
[ 3078.230255] kernel BUG at net/core/dev.c:6991!
[ 3078.236224] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
[ 3078.243431] Modules linked in: hns3 hclgevf hclge hnae3 vfio_iommu_type1 vfio_pci vfio_virqfd vfio pv680_mii(O)
[ 3078.258880] CPU: 0 PID: 295 Comm: kworker/u8:5 Tainted: G O 5.14.0-rc4+ #1
[ 3078.269102] Hardware name: , BIOS KpxxxFPGA 1P B600 V181 08/12/2021
[ 3078.276801] Workqueue: hclge hclge_service_task [hclge]
[ 3078.288774] pstate: 60400009 (nZCv daif +PAN -UAO -TCO BTYPE=--)
[ 3078.296168] pc : napi_enable+0x80/0x84
tc qdisc sho[w 3d0e7v8 .e3t0h218 79] lr : hns3_nic_net_open+0x138/0x510 [hns3]
[ 3078.314771] sp : ffff8000108abb20
[ 3078.319099] x29: ffff8000108abb20 x28: 0000000000000000 x27: ffff0820a8490300
[ 3078.329121] x26: 0000000000000001 x25: ffff08209cfc6200 x24: 0000000000000000
[ 3078.339044] x23: ffff0820a8490300 x22: ffff08209cd76000 x21: ffff0820abfe3880
[ 3078.349018] x20: 0000000000000000 x19: ffff08209cd76900 x18: 0000000000000000
[ 3078.358620] x17: 0000000000000000 x16: ffffc816e1727a50 x15: 0000ffff8f4ff930
[ 3078.368895] x14: 0000000000000000 x13: 0000000000000000 x12: 0000259e9dbeb6b4
[ 3078.377987] x11: 0096a8f7e764eb40 x10: 634615ad28d3eab5 x9 : ffffc816ad8885b8
[ 3078.387091] x8 : ffff08209cfc6fb8 x7 : ffff0820ac0da058 x6 : ffff0820a8490344
[ 3078.396356] x5 : 0000000000000140 x4 : 0000000000000003 x3 : ffff08209cd76938
[ 3078.405365] x2 : 0000000000000000 x1 : 0000000000000010 x0 : ffff0820abfe38a0
[ 3078.414657] Call trace:
[ 3078.418517] napi_enable+0x80/0x84
[ 3078.424626] hns3_reset_notify_up_enet+0x78/0xd0 [hns3]
[ 3078.433469] hns3_reset_notify+0x64/0x80 [hns3]
[ 3078.441430] hclge_notify_client+0x68/0xb0 [hclge]
[ 3078.450511] hclge_reset_rebuild+0x524/0x884 [hclge]
[ 3078.458879] hclge_reset_service_task+0x3c4/0x680 [hclge]
[ 3078.467470] hclge_service_task+0xb0/0xb54 [hclge]
[ 3078.475675] process_one_work+0x1dc/0x48c
[ 3078.481888] worker_thread+0x15c/0x464
[ 3078.487104] kthread+0x160/0x170
[ 3078.492479] ret_from_fork+0x10/0x18
[ 3078.498785] Code: c8027c81 35ffffa2 d50323bf d65f03c0 (d4210000)
[ 3078.506889] ---[ end trace 8ebe0340a1b0fb44 ]---
Once hns3_nic_net_open() is excute success, the flag
HNS3_NIC_STATE_DOWN will be cleared. So add checking for this
flag, directly return when HNS3_NIC_STATE_DOWN is no set.
Fixes: e888402789b9 ("net: hns3: call hns3_nic_net_open() while doing HNAE3_UP_CLIENT")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Matt Johnston says:
====================
Updates to MCTP core
This series adds timeouts for MCTP tags (a limited resource), and a few
other improvements to the MCTP core.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
