Age | Commit message (Collapse) | Author |
|
Russell said that he is no longer using this machine, and it seems that
nobody else has in a long time, so it's time to say goodbye to it.
As this is the last platform using CONFIG_ARCH_USES_GETTIMEOFFSET,
there are some follow-up patches to remove that as well.
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC defconfig updates from Olof Johansson:
"We keep this in a separate branch to avoid cross-branch conflicts, but
most of the material here is fairly boring -- some new drivers turned
on for hardware since they were merged, and some refreshed files due
to time having moved a lot of entries around"
* tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (33 commits)
ARM: multi_v7_defconfig: add FMC2 EBI controller support
arm64: defconfig: enable Qualcomm ASoC modules
arm64: defconfig: qcom: enable GPU clock controller for SM8[12]50
arm64: defconfig: enable INTERCONNECT for Qualcomm chipsets
arm64: defconfig: enable the sl28cpld board management controller
arm64: defconfig: Enable the eLCDIF and Raydium RM67191 drivers
arm64: defconfig: Enable Qcom SNPS Femto PHY
ARM: configs: Update Realview defconfig
ARM: configs: Update Versatile defconfig
ARM: config: aspeed_g5: Enable IBM OP Panel driver
ARM: config: aspeed-g5: Enable I2C GPIO mux driver
ARM: config: aspeed: Fix selection of media drivers
arm64: defconfig: Enable Samsung S3FWRN5 NFC driver
ARM: omap2plus_defconfig: enable generic net options
ARM: omap2plus_defconfig: enable twl4030_madc as a loadable module
arm64: defconfig: Enable clock driver for ROHM BD718x7 PMIC
arm64: defconfig: Build ADMA and ACONNECT driver
arm64: defconfig: Build AHUB component drivers
arm64: defconfig: Enable Lontium LT9611 driver
arm64: defcondfig: Enable USB ACM and FTDI drivers
...
|
|
Pull ARM SoC platform updates from Olof Johansson:
"SoC changes, a substantial part of this is cleanup of some of the
older platforms that used to have a bunch of board files.
In particular:
- Remove non-DT i.MX platforms that haven't seen activity in years,
it's time to remove them.
- A bunch of cleanup and removal of platform data for TI/OMAP
platforms, moving over to genpd for power/reset control (yay!)
- Major cleanup of Samsung S3C24xx and S3C64xx platforms, moving them
closer to multiplatform support (not quite there yet, but getting
close).
There are a few other changes too, smaller fixlets, etc. For new
platform support, the primary ones are:
- New SoC: Hisilicon SD5203, ARM926EJ-S platform.
- Cpufreq support for i.MX7ULP"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (121 commits)
ARM: mstar: Select MStar intc
ARM: stm32: Replace HTTP links with HTTPS ones
ARM: debug: add UART early console support for SD5203
ARM: hisi: add support for SD5203 SoC
ARM: omap3: enable off mode automatically
clk: imx: imx35: Remove mx35_clocks_init()
clk: imx: imx31: Remove mx31_clocks_init()
clk: imx: imx27: Remove mx27_clocks_init()
ARM: imx: Remove unused definitions
ARM: imx35: Retrieve the IIM base address from devicetree
ARM: imx3: Retrieve the AVIC base address from devicetree
ARM: imx3: Retrieve the CCM base address from devicetree
ARM: imx31: Retrieve the IIM base address from devicetree
ARM: imx27: Retrieve the CCM base address from devicetree
ARM: imx27: Retrieve the SYSCTRL base address from devicetree
ARM: s3c64xx: bring back notes from removed debug-macro.S
ARM: s3c24xx: fix Wunused-variable warning on !MMU
ARM: samsung: fix PM debug build with DEBUG_LL but !MMU
MAINTAINERS: mark linux-samsung-soc list non-moderated
ARM: imx: Remove remnant board file support pieces
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/defconfig
i.MX defconfig update for 5.10:
- Enable i.MX6SLL, i.MX7ULP SoC and CAAM crypto driver support in
multi_v7_defconfig.
- Enable the eLCDIF and Raydium RM67191 driver in arm64 defconfig to
support MIPI DSI on imx8mq-evk.
- Enable NWL DSI host controller, dphy and SITRONIX ST7703 panel driver
in arm64 defconfig to support display on imx8mq-librem5-devkit.
- Enable sl28cpld board management controller driver support in arm64
defconfig.
- Enable i.MX8M SoCs support in imx_v6_v7_defconfig as they can run in
AArch32 mode.
* tag 'imx-defconfig-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: defconfig: enable the sl28cpld board management controller
arm64: defconfig: Enable the eLCDIF and Raydium RM67191 drivers
arm64: defconfig: Enable imx8mq-librem5-devkit display stack
arm64: defconfig: re-sync DRM related defconfig bits
ARM: imx_v6_v7_defconfig: Support i.MX8MN/P/Q
ARM: multi_v7_defconfig: Enable i.MX7ULP SoC
ARM: multi_v7_defconfig: Enable i.MX6SLL SoC
ARM: multi_v7_defconfig: enable caam crypto module
Link: https://lore.kernel.org/r/20200923073009.23678-6-shawnguo@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/defconfig
Defconfig changes for omaps for v5.10 merge window
Enable twl4030_madc as a loadable module as the ADC is used
on some devices by the battery charger. And enable more widely
used networking options as loadable modules where possible.
* tag 'omap-for-v5.10/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: omap2plus_defconfig: enable generic net options
ARM: omap2plus_defconfig: enable twl4030_madc as a loadable module
Link: https://lore.kernel.org/r/pull-1601445968-476435@atomide.com-3
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
This patch adds FMC2 EBI controller support used by STM32MP SOCs.
Link: https://lore.kernel.org/r/20200924101342.4707-1-alexandre.torgue@st.com
Signed-off-by: Christophe Kerello <christophe.kerello@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/defconfig
Samsung defconfig changes for v5.10
1. Re-enable platform media drivers as new dependency on
MEDIA_PLATFORM_SUPPORT appeared.
2. Enable ROHM BD718x7 PMIC present on some of boards with i.MX 8 SoCs.
3. Enable Samsung S3FWRN5 NFC driver present on TM2/TM2E boards.
* tag 'samsung-defconfig-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: defconfig: Enable Samsung S3FWRN5 NFC driver
arm64: defconfig: Enable clock driver for ROHM BD718x7 PMIC
ARM: exynos_defconfig: enable platform media drivers
Link: https://lore.kernel.org/r/20200920160705.9651-2-krzk@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into arm/defconfig
ASPEED defconfig updates for 5.10
- Fix an issue with unwanted media drivers being enabled
- New driver: IBM OP Panel, used on ast2600 systems. This requires
enabling I2C slave mode
- Enable I2C MUX GPIO driver
* tag 'aspeed-5.10-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed:
ARM: config: aspeed_g5: Enable IBM OP Panel driver
ARM: config: aspeed-g5: Enable I2C GPIO mux driver
ARM: config: aspeed: Fix selection of media drivers
Link: https://lore.kernel.org/r/CACPK8XdFE2K1_cyrg=uaD6CaOm_p0RCRmjAsu6uyFKD4rnDggQ@mail.gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/defconfig
Renesas ARM defconfig updates for v5.10
- Enable touchscreen support on the iWave RZ/G1E platform,
- Update for PCIE_RCAR => CONFIG_PCIE_RCAR_{HOST,EP} split, including
enabling the latter,
- Enable FLASH support on various R-Car Gen3 boards,
- Refresh shmobile_defconfig for v5.9-rc1.
* tag 'renesas-arm-defconfig-for-v5.10-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
ARM: shmobile: defconfig: Enable CONFIG_PCIE_RCAR_HOST
ARM: multi_v7_defconfig: Enable CONFIG_PCIE_RCAR_HOST
arm64: defconfig: Enable RPC-IF support
ARM: shmobile: defconfig: Refresh for v5.9-rc1
arm64: defconfig: Enable R-Car PCIe endpoint driver
ARM: shmobile: defconfig: Enable TOUCHSCREEN_STMPE
Link: https://lore.kernel.org/r/20200904114819.30254-2-geert+renesas@glider.be
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Update the Integrator defconfig to the changes from the recent
kernel cycles and especially the v5.9-rc1 changes.
- Move options around as a result of Kconfig changes.
- Drop the ZBOOT_ROM* stuff that doesn't exist anymore.
- Add the syscon LEDs as used on the board for heartbeat
and MMC traffic indication.
- Add fixed voltage regulator support, this is used by the
MMC controller for card voltage.
- Select CONFIG_DRM_DISPLAY_CONNECTOR=y, the
CONFIG_DRM_SIMPLE_BRIDGE was renamed when renaming the
driver, but the simple bridge requires another bridge,
the display connector bridge, in order to work, so this
is required to have graphics working properly in kernel
v5.9-rc1+
Link: https://lore.kernel.org/r/20200901082558.80388-1-linus.walleij@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Update the Integrator defconfig to the changes from the recent
kernel cycles and especially the v5.9-rc1 changes.
- Move options around as a result of Kconfig changes.
- Drop the ZBOOT_ROM* stuff that doesn't exist anymore.
- Select CONFIG_DRM_DISPLAY_CONNECTOR=y, the
CONFIG_DRM_SIMPLE_BRIDGE was renamed when renaming the
driver, but the simple bridge requires another bridge,
the display connector bridge, in order to work, so this
is required to have graphics working properly in kernel
v5.9-rc1+
Link: https://lore.kernel.org/r/20200901073930.31548-1-linus.walleij@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
The IBM op-panel driver requires i2c slave mode.
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
Used by rainier and q71l.
Signed-off-by: Joel Stanley <joel@jms.id.au>
|
|
In the 5.7 merge window the media kconfig was restructued. For most
platforms these changes set CONFIG_MEDIA_SUPPORT_FILTER=y which keeps
unwanted drivers disabled.
The exception is if a config sets EMBEDDED or EXPERT (see b0cd4fb27665).
In that case the filter is set to =n, causing a bunch of DVB tuner drivers
(MEDIA_TUNER_*) to be accidentally enabled. This was noticed as it blew
out the build time for the Aspeed defconfigs.
Enabling the filter means the Aspeed config also needs to set
CONFIG_MEDIA_PLATFORM_SUPPORT=y in order to have the CONFIG_VIDEO_ASPEED
driver enabled.
Fixes: 06b93644f4d1 ("media: Kconfig: add an option to filter in/out platform drivers")
Fixes: b0cd4fb27665 ("media: Kconfig: on !EMBEDDED && !EXPERT, enable driver filtering")
Signed-off-by: Joel Stanley <joel@jms.id.au>
Cc: stable@vger.kernel.org
CC: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Enable set of generic, widely used, networking options:
- basic QoS, filter and actions
- VLAN support
- Bridge support
Use "M" build option where possible.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
The ADC is used by twl4030_charger to read voltages. If a dtb contains
the ADC but the module is not build, probing twl4030_charger will be
endlessly deferred, so just enable CONFIG_TWL4030_MADC in the config.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
|
i.MX35 has basic device tree support.
To achieve the goal of converting all i.MX SoCs to a
devicetree-only platform, remove imx35 board files.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
i.MX31 has basic device tree support.
To achieve the goal of converting all i.MX SoCs to a
devicetree-only platform, remove imx31 board files.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
i.MX27 has basic device tree support.
To achieve the goal of converting all i.MX SoCs to a
devicetree-only platform, remove imx27 board files.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
config option PCIE_RCAR internally selects PCIE_RCAR_HOST which builds the
same driver. So this patch renames CONFIG_PCIE_RCAR to
CONFIG_PCIE_RCAR_HOST so that PCIE_RCAR can be safely dropped from Kconfig
file.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20200826093220.10266-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
config option PCIE_RCAR internally selects PCIE_RCAR_HOST which builds the
same driver. So this patch renames CONFIG_PCIE_RCAR to
CONFIG_PCIE_RCAR_HOST so that PCIE_RCAR can be safely dropped from Kconfig
file.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20200826093220.10266-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Refresh the defconfig for Renesas ARM systems:
- Drop CONFIG_BACKLIGHT_GENERIC=n (removed in commit 7ecdea4a0226f6c5
("backlight: generic_bl: Remove this driver as it is unused")).
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20200819101125.12113-1-geert+renesas@glider.be
|
|
Update the Integrator defconfig to the changes from the recent
kernel cycles and especially the v5.9-rc1 changes.
- Move options around as a result of Kconfig changes.
- Drop the ZBOOT_ROM* stuff that doesn't exist anymore.
- Select GPIO input and evdev as used by the pushbuttons
on the machine.
- Select CONFIG_DRM_DISPLAY_CONNECTOR=y, the
CONFIG_DRM_SIMPLE_BRIDGE was renamed when renaming the
driver, but the simple bridge requires another bridge,
the display connector bridge, in order to work, so this
is required to have graphics working properly in kernel
v5.9-rc1+
Link: https://lore.kernel.org/r/20200820085752.42994-1-linus.walleij@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
i.MX8MN/P/Q is built with AArch64 hardware, this is to support
it could run in AArch32 mode with clock and pinctrl driver enabled.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Enable i.MX7ULP SoC which is already supported by mainline kernel.
Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Enable i.MX6SLL SoC which is already supported by mainline kernel.
Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
caam crypto module is included in several ARMv7-based SoCs from
i.MX, Layerscape, Vybrid families.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Commit 06b93644f4d1 ("media: Kconfig: add an option to filter in/out
platform drivers") introduced a dependency of all platform media drivers
on the new CONFIG_MEDIA_PLATFORM_SUPPORT symbol, so add it also to
exynos_defconfig. While touching this part, update the media related
configs to the current layout.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
Enable support for the stmpe i2c touch controller, which is used on the
iWave RZ/G1E platform.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20200806121704.3192-1-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Since commit 61a47c1ad3a4dc ("sysctl: Remove the sysctl system call"),
sys_sysctl is actually unavailable: any input can only return an error.
We have been warning about people using the sysctl system call for years
and believe there are no more users. Even if there are users of this
interface if they have not complained or fixed their code by now they
probably are not going to, so there is no point in warning them any
longer.
So completely remove sys_sysctl on all architectures.
[nixiaoming@huawei.com: s390: fix build error for sys_call_table_emu]
Link: http://lkml.kernel.org/r/20200618141426.16884-1-nixiaoming@huawei.com
Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Will Deacon <will@kernel.org> [arm/arm64]
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Bin Meng <bin.meng@windriver.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: chenzefeng <chenzefeng2@huawei.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Christian Brauner <christian@brauner.io>
Cc: Chris Zankel <chris@zankel.net>
Cc: David Howells <dhowells@redhat.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Diego Elio Pettenò <flameeyes@flameeyes.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kars de Jong <jongk@linux-m68k.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Marco Elver <elver@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Nick Piggin <npiggin@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: Paul Burton <paulburton@kernel.org>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: Sargun Dhillon <sargun@sargun.me>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Sven Schnelle <svens@stackframe.org>
Cc: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Zhou Yanjie <zhouyanjie@wanyeetech.com>
Link: http://lkml.kernel.org/r/20200616030734.87257-1-nixiaoming@huawei.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- Legacy soc_camera driver was removed from staging
- New I2C sensor related drivers: dw9768, ch7322, max9271, rdacm20
- TI vpe driver code was re-organized and had new features added
- Added Xilinx MIPI CSI-2 Rx Subsystem driver
- Added support for Infrared Toy and IR Droid devices
- Lots of random driver fixes, new features and cleanups
* tag 'media/v5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (318 commits)
media: camss: fix memory leaks on error handling paths in probe
media: davinci: vpif_capture: fix potential double free
media: radio: remove redundant assignment to variable retval
media: allegro: fix potential null dereference on header
media: mtk-mdp: Fix a refcounting bug on error in init
media: allegro: fix an error pointer vs NULL check
media: meye: fix missing pm_mchip_mode field
media: cafe-driver: use generic power management
media: saa7164: use generic power management
media: v4l2-dev/ioctl: Fix document for VIDIOC_QUERYCAP
media: v4l2: Correct kernel-doc inconsistency
media: v4l2: Correct kernel-doc inconsistency
media: dvbdev.h: keep * together with the type
media: v4l2-subdev.h: keep * together with the type
media: videobuf2: Print videobuf2 buffer state by name
media: colorspaces-details.rst: fix V4L2_COLORSPACE_JPEG description
media: tw68: use generic power management
media: meye: use generic power management
media: cx88: use generic power management
media: cx25821: use generic power management
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/defconfig
AT91 defconfig for 5.9
- Add ClassD, KSZ ethernet switches, brdige, vlan to sama5_defconfig
- Reenable CAN support in sama5_defconfig
* tag 'at91-defconfig-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: configs: at91: sama5: enable CAN PLATFORM driver
ARM: configs: at91: sama5: enable bridge and VLAN filtering
ARM: configs: at91: sama5: add support for KSZ ethernet switches
ARM: configs: at91: sama5: Enable CLASSD
Link: https://lore.kernel.org/r/20200726192810.GA181818@piout.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
CAN_M_CAN_PLATFORM is needed to probe the driver on sama5 platforms
after the driver was split into multiple files.
Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com>
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200723162434.1983643-3-codrin.ciubotariu@microchip.com
|
|
These modules are needed to configure bridges in Linux, to take full
advantage of the KSZ switch capabilities.
Signed-off-by: Razvan Stefanescu <razvan.stefanescu@microchip.com>
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200723162434.1983643-2-codrin.ciubotariu@microchip.com
|
|
Enable DSA and KSZ9477 support as modules. Ethernet switches are used by
the SAMA5D2-ICP board.
Signed-off-by: Razvan Stefanescu <razvan.stefanescu@microchip.com>
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200723162434.1983643-1-codrin.ciubotariu@microchip.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/defconfig
i.MX defconfig update for 5.9:
- Enable PCA9450 regulator driver in arm64 defconfig.
- Enable RV8803 RTC and FSL_SAI audio support in arm64 defconfig to make
it useful for Kontron sl28 boards.
- Enable i.MX8MM clock and pinctrl driver in imx_v6_v7_defconfig to get
AARCH32 mode kernel work on AARCH64 hardware.
* tag 'imx-defconfig-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx_v6_v7_defconfig: Support i.MX8MM
arm64: defconfig: enable RTC and audio support on Kontron sl28 boards
arm64: defconfig: add pca9450 pmic driver
Link: https://lore.kernel.org/r/20200720085536.24138-5-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/defconfig
A bunch of patches to generally make sunxi_defconfig more helpful and
add all the new drivers merged recently.
* tag 'sunxi-config-for-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
ARM: configs: sunxi: Enable crypto related options
ARM: sunxi: configs: Enable the Mailbox driver
ARM: configs: sunxi: Enable the PS/2 controller
ARM: configs: sunxi: Enable Lima
ARM: configs: sunxi: Add DRM output-related options
ARM: configs: sunxi: Enable ASoC options
ARM: configs: sunxi: Enable Cedrus
ARM: configs: sunxi: Enable the deinterlace and rotation engines
ARM: configs: sunxi: Enable the CSI drivers
ARM: configs: sunxi: Run savedefconfig
Link: https://lore.kernel.org/r/c74e64c9-f1f2-40ee-b4cd-c1430d32cf8d.lettre@localhost
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/defconfig
ARM: tegra: Default configuration changes for v5.9-rc1
Enables a few new configuration options that are useful on the new Nexus
7 and Acer A500 devices, as well as the userspace CPU frequency governor
that's mainly used for testing.
* tag 'tegra-for-5.9-arm-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra_defconfig: Enable options useful for Nexus 7 and Acer A500
ARM: tegra: Enable CPUFREQ userspace governor
Link: https://lore.kernel.org/r/20200717161300.1661002-6-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
We refactored the CrOS EC drivers moving part of the code from the MFD
subsystem to the platform chrome subsystem. During this change we needed
to rename some config options, so, update the defconfigs accordingly.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Tested-by: Gwendal Grignou <gwendal@chromium.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Enable several very useful options and drivers for hardware that is found
on Nexus 7 and Acer A500 tablet devices. Please note that some drivers may
require firmware files extracted from original Android image.
Link: https://github.com/grate-driver/linux-firmware
Link: https://github.com/grate-driver/alsa-ucm-conf
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Enable the CPUFREQ userspace governor in the tegra_defconfig so that
we can test CPUFREQ with the userspace governor with this configuration
on 32-bit Tegra devices.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
i.MX8MM is built with AArch64 hardware, this is to support
it could run in Aarch32 mode with clock and pinctrl driver enabled.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Some crypto drivers were not enabled so far, so let's make sure we have
them compiled in our defconfig.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20200706132323.147562-3-maxime@cerno.tech
|
|
The mailbox found on the A31 and later SoCs have recently gained some
support in Linux. Since it's going to be useful for crust, let's enable it
in our defconfig.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20200706132323.147562-2-maxime@cerno.tech
|
|
The A20 has a PS/2 controller and we have a driver for it, so let's enable
it in our defconfig.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20200706132323.147562-1-maxime@cerno.tech
|
|
Lima is fairly stable now, so let's enable it by default.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20200705091904.42795-7-maxime@cerno.tech
Acked-by: Chen-Yu Tsai <wens@csie.org>
|
|
We're missing a bunch of options related to the DRM driver options (panels,
HDMI, CEC) that seems useful. Let's add them in the defconfig.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20200705091904.42795-5-maxime@cerno.tech
Acked-by: Chen-Yu Tsai <wens@csie.org>
|
|
Most of our ASoC drivers were left out of the defconfig. Let's add them.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20200705091904.42795-6-maxime@cerno.tech
Acked-by: Chen-Yu Tsai <wens@csie.org>
|
|
Let's enable the staging related options and Cedrus in our defconfig.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20200705091904.42795-4-maxime@cerno.tech
Acked-by: Chen-Yu Tsai <wens@csie.org>
|
|
We've had drivers for the deinterlace and rotation engines for a while now,
let's enable them in the defconfig.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20200705091904.42795-3-maxime@cerno.tech
Acked-by: Chen-Yu Tsai <wens@csie.org>
|