| Age | Commit message (Collapse) | Author |
|---|
|
Pull kvm updates from Paolo Bonzini:
"S390:
- ultravisor communication device driver
- fix TEID on terminating storage key ops
RISC-V:
- Added Sv57x4 support for G-stage page table
- Added range based local HFENCE functions
- Added remote HFENCE functions based on VCPU requests
- Added ISA extension registers in ONE_REG interface
- Updated KVM RISC-V maintainers entry to cover selftests support
ARM:
- Add support for the ARMv8.6 WFxT extension
- Guard pages for the EL2 stacks
- Trap and emulate AArch32 ID registers to hide unsupported features
- Ability to select and save/restore the set of hypercalls exposed to
the guest
- Support for PSCI-initiated suspend in collaboration with userspace
- GICv3 register-based LPI invalidation support
- Move host PMU event merging into the vcpu data structure
- GICv3 ITS save/restore fixes
- The usual set of small-scale cleanups and fixes
x86:
- New ioctls to get/set TSC frequency for a whole VM
- Allow userspace to opt out of hypercall patching
- Only do MSR filtering for MSRs accessed by rdmsr/wrmsr
AMD SEV improvements:
- Add KVM_EXIT_SHUTDOWN metadata for SEV-ES
- V_TSC_AUX support
Nested virtualization improvements for AMD:
- Support for "nested nested" optimizations (nested vVMLOAD/VMSAVE,
nested vGIF)
- Allow AVIC to co-exist with a nested guest running
- Fixes for LBR virtualizations when a nested guest is running, and
nested LBR virtualization support
- PAUSE filtering for nested hypervisors
Guest support:
- Decoupling of vcpu_is_preempted from PV spinlocks"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (199 commits)
KVM: x86: Fix the intel_pt PMI handling wrongly considered from guest
KVM: selftests: x86: Sync the new name of the test case to .gitignore
Documentation: kvm: reorder ARM-specific section about KVM_SYSTEM_EVENT_SUSPEND
x86, kvm: use correct GFP flags for preemption disabled
KVM: LAPIC: Drop pending LAPIC timer injection when canceling the timer
x86/kvm: Alloc dummy async #PF token outside of raw spinlock
KVM: x86: avoid calling x86 emulator without a decoded instruction
KVM: SVM: Use kzalloc for sev ioctl interfaces to prevent kernel data leak
x86/fpu: KVM: Set the base guest FPU uABI size to sizeof(struct kvm_xsave)
s390/uv_uapi: depend on CONFIG_S390
KVM: selftests: x86: Fix test failure on arch lbr capable platforms
KVM: LAPIC: Trace LAPIC timer expiration on every vmentry
KVM: s390: selftest: Test suppression indication on key prot exception
KVM: s390: Don't indicate suppression on dirtying, failing memop
selftests: drivers/s390x: Add uvdevice tests
drivers/s390/char: Add Ultravisor io device
MAINTAINERS: Update KVM RISC-V entry to cover selftests support
RISC-V: KVM: Introduce ISA extension register
RISC-V: KVM: Cleanup stale TLB entries when host CPU changes
RISC-V: KVM: Add remote HFENCE functions based on VCPU requests
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
- Initial support for the ARMv9 Scalable Matrix Extension (SME).
SME takes the approach used for vectors in SVE and extends this to
provide architectural support for matrix operations. No KVM support
yet, SME is disabled in guests.
- Support for crashkernel reservations above ZONE_DMA via the
'crashkernel=X,high' command line option.
- btrfs search_ioctl() fix for live-lock with sub-page faults.
- arm64 perf updates: support for the Hisilicon "CPA" PMU for
monitoring coherent I/O traffic, support for Arm's CMN-650 and
CMN-700 interconnect PMUs, minor driver fixes, kerneldoc cleanup.
- Kselftest updates for SME, BTI, MTE.
- Automatic generation of the system register macros from a 'sysreg'
file describing the register bitfields.
- Update the type of the function argument holding the ESR_ELx register
value to unsigned long to match the architecture register size
(originally 32-bit but extended since ARMv8.0).
- stacktrace cleanups.
- ftrace cleanups.
- Miscellaneous updates, most notably: arm64-specific huge_ptep_get(),
avoid executable mappings in kexec/hibernate code, drop TLB flushing
from get_clear_flush() (and rename it to get_clear_contig()),
ARCH_NR_GPIO bumped to 2048 for ARCH_APPLE.
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (145 commits)
arm64/sysreg: Generate definitions for FAR_ELx
arm64/sysreg: Generate definitions for DACR32_EL2
arm64/sysreg: Generate definitions for CSSELR_EL1
arm64/sysreg: Generate definitions for CPACR_ELx
arm64/sysreg: Generate definitions for CONTEXTIDR_ELx
arm64/sysreg: Generate definitions for CLIDR_EL1
arm64/sve: Move sve_free() into SVE code section
arm64: Kconfig.platforms: Add comments
arm64: Kconfig: Fix indentation and add comments
arm64: mm: avoid writable executable mappings in kexec/hibernate code
arm64: lds: move special code sections out of kernel exec segment
arm64/hugetlb: Implement arm64 specific huge_ptep_get()
arm64/hugetlb: Use ptep_get() to get the pte value of a huge page
arm64: kdump: Do not allocate crash low memory if not needed
arm64/sve: Generate ZCR definitions
arm64/sme: Generate defintions for SVCR
arm64/sme: Generate SMPRI_EL1 definitions
arm64/sme: Automatically generate SMPRIMAP_EL2 definitions
arm64/sme: Automatically generate SMIDR_EL1 defines
arm64/sme: Automatically generate defines for SMCR
...
|
|
* kvm-arm64/aarch32-idreg-trap:
: .
: Add trapping/sanitising infrastructure for AArch32 systen registers,
: allowing more control over what we actually expose (such as the PMU).
:
: Patches courtesy of Oliver and Alexandru.
: .
KVM: arm64: Fix new instances of 32bit ESRs
KVM: arm64: Hide AArch32 PMU registers when not available
KVM: arm64: Start trapping ID registers for 32 bit guests
KVM: arm64: Plumb cp10 ID traps through the AArch64 sysreg handler
KVM: arm64: Wire up CP15 feature registers to their AArch64 equivalents
KVM: arm64: Don't write to Rt unless sys_reg emulation succeeds
KVM: arm64: Return a bool from emulate_cp()
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
To date KVM has not trapped ID register accesses from AArch32, meaning
that guests get an unconstrained view of what hardware supports. This
can be a serious problem because we try to base the guest's feature
registers on values that are safe system-wide. Furthermore, KVM does not
implement the latest ISA in the PMU and Debug architecture, so we
constrain these fields to supported values.
Since KVM now correctly handles CP15 and CP10 register traps, we no
longer need to clear HCR_EL2.TID3 for 32 bit guests and will instead
emulate reads with their safe values.
Signed-off-by: Oliver Upton <oupton@google.com>
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220503060205.2823727-6-oupton@google.com
|
|
ESR_EL2 was defined as a 32-bit register in the initial release of the
ARM Architecture Manual for Armv8-A, and was later extended to 64 bits,
with bits [63:32] RES0. ARMv8.7 introduced FEAT_LS64, which makes use of
bits [36:32].
KVM treats ESR_EL1 as a 64-bit register when saving and restoring the
guest context, but ESR_EL2 is handled as a 32-bit register. Start
treating ESR_EL2 as a 64-bit register to allow KVM to make use of the
most significant 32 bits in the future.
The type chosen to represent ESR_EL2 is u64, as that is consistent with the
notation KVM overwhelmingly uses today (u32), and how the rest of the
registers are declared.
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220425114444.368693-5-alexandru.elisei@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
When taking a translation fault for an IPA that is outside of
the range defined by the hypervisor (between the HW PARange and
the IPA range), we stupidly treat it as an IO and forward the access
to userspace. Of course, userspace can't do much with it, and things
end badly.
Arguably, the guest is braindead, but we should at least catch the
case and inject an exception.
Check the faulting IPA against:
- the sanitised PARange: inject an address size fault
- the IPA size: inject an abort
Reported-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
KVM allows userspace to configure either all EL1 32bit or 64bit vCPUs
for a guest. At vCPU reset, vcpu_allowed_register_width() checks
if the vcpu's register width is consistent with all other vCPUs'.
Since the checking is done even against vCPUs that are not initialized
(KVM_ARM_VCPU_INIT has not been done) yet, the uninitialized vCPUs
are erroneously treated as 64bit vCPU, which causes the function to
incorrectly detect a mixed-width VM.
Introduce KVM_ARCH_FLAG_EL1_32BIT and KVM_ARCH_FLAG_REG_WIDTH_CONFIGURED
bits for kvm->arch.flags. A value of the EL1_32BIT bit indicates that
the guest needs to be configured with all 32bit or 64bit vCPUs, and
a value of the REG_WIDTH_CONFIGURED bit indicates if a value of the
EL1_32BIT bit is valid (already set up). Values in those bits are set at
the first KVM_ARM_VCPU_INIT for the guest based on KVM_ARM_VCPU_EL1_32BIT
configuration for the vCPU.
Check vcpu's register width against those new bits at the vcpu's
KVM_ARM_VCPU_INIT (instead of against other vCPUs' register width).
Fixes: 66e94d5cafd4 ("KVM: arm64: Prevent mixed-width VM creation")
Signed-off-by: Reiji Watanabe <reijiw@google.com>
Reviewed-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220329031924.619453-2-reijiw@google.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for Linux 5.16
- Simplification of the 'vcpu first run' by integrating it into
KVM's 'pid change' flow
- Refactoring of the FP and SVE state tracking, also leading to
a simpler state and less shared data between EL1 and EL2 in
the nVHE case
- Tidy up the header file usage for the nvhe hyp object
- New HYP unsharing mechanism, finally allowing pages to be
unmapped from the Stage-1 EL2 page-tables
- Various pKVM cleanups around refcounting and sharing
- A couple of vgic fixes for bugs that would trigger once
the vcpu xarray rework is merged, but not sooner
- Add minimal support for ARMv8.7's PMU extension
- Rework kvm_pgtable initialisation ahead of the NV work
- New selftest for IRQ injection
- Teach selftests about the lack of default IPA space and
page sizes
- Expand sysreg selftest to deal with Pointer Authentication
- The usual bunch of cleanups and doc update
|
|
Replace the hardcoded value with the existing definition.
No functional change intended.
Signed-off-by: Fuad Tabba <tabba@google.com>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211208192810.657360-1-tabba@google.com
|
|
Move the put and reload of the vGIC out of the block/unblock callbacks
and into a dedicated WFI helper. Functionally, this is nearly a nop as
the block hook is called at the very beginning of kvm_vcpu_block(), and
the only code in kvm_vcpu_block() after the unblock hook is to update the
halt-polling controls, i.e. can only affect the next WFI.
Back when the arch (un)blocking hooks were added by commits 3217f7c25bca
("KVM: Add kvm_arch_vcpu_{un}blocking callbacks) and d35268da6687
("arm/arm64: KVM: arch_timer: Only schedule soft timer on vcpu_block"),
the hooks were invoked only when KVM was about to "block", i.e. schedule
out the vCPU. The use case at the time was to schedule a timer in the
host based on the earliest timer in the guest in order to wake the
blocking vCPU when the emulated guest timer fired. Commit accb99bcd0ca
("KVM: arm/arm64: Simplify bg_timer programming") reworked the timer
logic to be even more precise, by waiting until the vCPU was actually
scheduled out, and so move the timer logic from the (un)blocking hooks to
vcpu_load/put.
In the meantime, the hooks gained usage for enabling vGIC v4 doorbells in
commit df9ba95993b9 ("KVM: arm/arm64: GICv4: Use the doorbell interrupt
as an unblocking source"), and added related logic for the VMCR in commit
5eeaf10eec39 ("KVM: arm/arm64: Sync ICH_VMCR_EL2 back when about to block").
Finally, commit 07ab0f8d9a12 ("KVM: Call kvm_arch_vcpu_blocking early
into the blocking sequence") hoisted the (un)blocking hooks so that they
wrapped KVM's halt-polling logic in addition to the core "block" logic.
In other words, the original need for arch hooks to take action _only_
in the block path is long since gone.
Cc: Oliver Upton <oupton@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211009021236.4122790-11-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
We currently check SCTLR_EL1.EE when computing the address of
a faulting guest access. However, the fault could have occured at
EL0, in which case the right bit to check would be SCTLR_EL1.E0E.
This is pretty unlikely to cause any issue in practice: You'd have
to have a guest with a LE EL1 and a BE EL0 (or the other way around),
and have mapped a device into the EL0 page tables.
Good luck with that!
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Link: https://lore.kernel.org/r/20211012112312.1247467-1-maz@kernel.org
|
|
Add a new VM feature 'KVM_ARM_CAP_MTE' which enables memory tagging
for a VM. This will expose the feature to the guest and automatically
tag memory pages touched by the VM as PG_mte_tagged (and clear the tag
storage) to ensure that the guest cannot see stale tags, and so that
the tags are correctly saved/restored across swap.
Actually exposing the new capability to user space happens in a later
patch.
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
[maz: move VM_SHARED sampling into the critical section]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210621111716.37157-3-steven.price@arm.com
|
|
It looks like we have tolerated creating mixed-width VMs since...
forever. However, that was never the intention, and we'd rather
not have to support that pointless complexity.
Forbid such a setup by making sure all the vcpus have the same
register width.
Reported-by: Steven Price <steven.price@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20210524170752.1549797-1-maz@kernel.org
|
|
Pull KVM updates from Paolo Bonzini:
"Much x86 work was pushed out to 5.12, but ARM more than made up for it.
ARM:
- PSCI relay at EL2 when "protected KVM" is enabled
- New exception injection code
- Simplification of AArch32 system register handling
- Fix PMU accesses when no PMU is enabled
- Expose CSV3 on non-Meltdown hosts
- Cache hierarchy discovery fixes
- PV steal-time cleanups
- Allow function pointers at EL2
- Various host EL2 entry cleanups
- Simplification of the EL2 vector allocation
s390:
- memcg accouting for s390 specific parts of kvm and gmap
- selftest for diag318
- new kvm_stat for when async_pf falls back to sync
x86:
- Tracepoints for the new pagetable code from 5.10
- Catch VFIO and KVM irqfd events before userspace
- Reporting dirty pages to userspace with a ring buffer
- SEV-ES host support
- Nested VMX support for wait-for-SIPI activity state
- New feature flag (AVX512 FP16)
- New system ioctl to report Hyper-V-compatible paravirtualization features
Generic:
- Selftest improvements"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (171 commits)
KVM: SVM: fix 32-bit compilation
KVM: SVM: Add AP_JUMP_TABLE support in prep for AP booting
KVM: SVM: Provide support to launch and run an SEV-ES guest
KVM: SVM: Provide an updated VMRUN invocation for SEV-ES guests
KVM: SVM: Provide support for SEV-ES vCPU loading
KVM: SVM: Provide support for SEV-ES vCPU creation/loading
KVM: SVM: Update ASID allocation to support SEV-ES guests
KVM: SVM: Set the encryption mask for the SVM host save area
KVM: SVM: Add NMI support for an SEV-ES guest
KVM: SVM: Guest FPU state save/restore not needed for SEV-ES guest
KVM: SVM: Do not report support for SMM for an SEV-ES guest
KVM: x86: Update __get_sregs() / __set_sregs() to support SEV-ES
KVM: SVM: Add support for CR8 write traps for an SEV-ES guest
KVM: SVM: Add support for CR4 write traps for an SEV-ES guest
KVM: SVM: Add support for CR0 write traps for an SEV-ES guest
KVM: SVM: Add support for EFER write traps for an SEV-ES guest
KVM: SVM: Support string IO operations for an SEV-ES guest
KVM: SVM: Support MMIO for an SEV-ES guest
KVM: SVM: Create trace events for VMGEXIT MSR protocol processing
KVM: SVM: Create trace events for VMGEXIT processing
...
|
|
If we get a FSC_PERM fault, just using (logging_active && writable) to
determine calling kvm_pgtable_stage2_map(). There will be two more cases
we should consider.
(1) After logging_active is configged back to false from true. When we
get a FSC_PERM fault with write_fault and adjustment of hugepage is needed,
we should merge tables back to a block entry. This case is ignored by still
calling kvm_pgtable_stage2_relax_perms(), which will lead to an endless
loop and guest panic due to soft lockup.
(2) We use (FSC_PERM && logging_active && writable) to determine
collapsing a block entry into a table by calling kvm_pgtable_stage2_map().
But sometimes we may only need to relax permissions when trying to write
to a page other than a block.
In this condition,using kvm_pgtable_stage2_relax_perms() will be fine.
The ISS filed bit[1:0] in ESR_EL2 regesiter indicates the stage2 lookup
level at which a D-abort or I-abort occurred. By comparing granule of
the fault lookup level with vma_pagesize, we can strictly distinguish
conditions of calling kvm_pgtable_stage2_relax_perms() or
kvm_pgtable_stage2_map(), and the above two cases will be well considered.
Suggested-by: Keqian Zhu <zhukeqian1@huawei.com>
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201201201034.116760-4-wangyanan55@huawei.com
|
|
The only use of the register mapping code was for the sake of the LR
mapping, which we trivially solved in a previous patch. Get rid of
the whole thing now.
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Move the AArch32 exception injection code back into the inject_fault.c
file, removing the need for a few non-static functions now that AArch32
host support is a thing of the past.
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The SPSR setting code is now completely unused, including that dealing
with banked AArch32 SPSRs. Cleanup time.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Move the AArch64 exception injection code from EL1 to HYP, leaving
only the ESR_EL1 updates to EL1. In order to come with the differences
between VHE and nVHE, two set of system register accessors are provided.
SPSR, ELR, PC and PSTATE are now completely handled in the hypervisor.
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
In an effort to remove the vcpu PC manipulations from EL1 on nVHE
systems, move kvm_skip_instr() to be HYP-specific. EL1's intent
to increment PC post emulation is now signalled via a flag in the
vcpu structure.
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
There is no need to feed the result of kvm_vcpu_trap_il_is32bit()
to kvm_skip_instr(), as only AArch32 has a variable length ISA, and
this helper can equally be called from kvm_skip_instr32(), reducing
the complexity at all the call sites.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"There's quite a lot of code here, but much of it is due to the
addition of a new PMU driver as well as some arm64-specific selftests
which is an area where we've traditionally been lagging a bit.
In terms of exciting features, this includes support for the Memory
Tagging Extension which narrowly missed 5.9, hopefully allowing
userspace to run with use-after-free detection in production on CPUs
that support it. Work is ongoing to integrate the feature with KASAN
for 5.11.
Another change that I'm excited about (assuming they get the hardware
right) is preparing the ASID allocator for sharing the CPU page-table
with the SMMU. Those changes will also come in via Joerg with the
IOMMU pull.
We do stray outside of our usual directories in a few places, mostly
due to core changes required by MTE. Although much of this has been
Acked, there were a couple of places where we unfortunately didn't get
any review feedback.
Other than that, we ran into a handful of minor conflicts in -next,
but nothing that should post any issues.
Summary:
- Userspace support for the Memory Tagging Extension introduced by
Armv8.5. Kernel support (via KASAN) is likely to follow in 5.11.
- Selftests for MTE, Pointer Authentication and FPSIMD/SVE context
switching.
- Fix and subsequent rewrite of our Spectre mitigations, including
the addition of support for PR_SPEC_DISABLE_NOEXEC.
- Support for the Armv8.3 Pointer Authentication enhancements.
- Support for ASID pinning, which is required when sharing
page-tables with the SMMU.
- MM updates, including treating flush_tlb_fix_spurious_fault() as a
no-op.
- Perf/PMU driver updates, including addition of the ARM CMN PMU
driver and also support to handle CPU PMU IRQs as NMIs.
- Allow prefetchable PCI BARs to be exposed to userspace using normal
non-cacheable mappings.
- Implementation of ARCH_STACKWALK for unwinding.
- Improve reporting of unexpected kernel traps due to BPF JIT
failure.
- Improve robustness of user-visible HWCAP strings and their
corresponding numerical constants.
- Removal of TEXT_OFFSET.
- Removal of some unused functions, parameters and prototypes.
- Removal of MPIDR-based topology detection in favour of firmware
description.
- Cleanups to handling of SVE and FPSIMD register state in
preparation for potential future optimisation of handling across
syscalls.
- Cleanups to the SDEI driver in preparation for support in KVM.
- Miscellaneous cleanups and refactoring work"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (148 commits)
Revert "arm64: initialize per-cpu offsets earlier"
arm64: random: Remove no longer needed prototypes
arm64: initialize per-cpu offsets earlier
kselftest/arm64: Check mte tagged user address in kernel
kselftest/arm64: Verify KSM page merge for MTE pages
kselftest/arm64: Verify all different mmap MTE options
kselftest/arm64: Check forked child mte memory accessibility
kselftest/arm64: Verify mte tag inclusion via prctl
kselftest/arm64: Add utilities and a test to validate mte memory
perf: arm-cmn: Fix conversion specifiers for node type
perf: arm-cmn: Fix unsigned comparison to less than zero
arm64: dbm: Invalidate local TLB when setting TCR_EL1.HD
arm64: mm: Make flush_tlb_fix_spurious_fault() a no-op
arm64: Add support for PR_SPEC_DISABLE_NOEXEC prctl() option
arm64: Pull in task_stack_page() to Spectre-v4 mitigation code
KVM: arm64: Allow patching EL2 vectors even with KASLR is not enabled
arm64: Get rid of arm64_ssbd_state
KVM: arm64: Convert ARCH_WORKAROUND_2 to arm64_get_spectre_v4_state()
KVM: arm64: Get rid of kvm_arm_have_ssbd()
KVM: arm64: Simplify handling of ARCH_WORKAROUND_2
...
|
|
Owing to the fact that the host kernel is always mitigated, we can
drastically simplify the WA2 handling by keeping the mitigation
state ON when entering the guest. This means the guest is either
unaffected or not mitigated.
This results in a nice simplification of the mitigation space,
and the removal of a lot of code that was never really used anyway.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Now that kvm_vcpu_trap_is_write_fault() checks for S1PTW, there
is no need for kvm_vcpu_dabt_iswrite() to do the same thing, as
we already check for this condition on all existing paths.
Drop the check and add a comment instead.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200915104218.1284701-3-maz@kernel.org
|
|
KVM currently assumes that an instruction abort can never be a write.
This is in general true, except when the abort is triggered by
a S1PTW on instruction fetch that tries to update the S1 page tables
(to set AF, for example).
This can happen if the page tables have been paged out and brought
back in without seeing a direct write to them (they are thus marked
read only), and the fault handling code will make the PT executable(!)
instead of writable. The guest gets stuck forever.
In these conditions, the permission fault must be considered as
a write so that the Stage-1 update can take place. This is essentially
the I-side equivalent of the problem fixed by 60e21a0ef54c ("arm64: KVM:
Take S1 walks into account when determining S2 write faults").
Update kvm_is_write_fault() to return true on IABT+S1PTW, and introduce
kvm_vcpu_trap_is_exec_fault() that only return true when no faulting
on a S1 fault. Additionally, kvm_vcpu_dabt_iss1tw() is renamed to
kvm_vcpu_abt_iss1tw(), as the above makes it plain that it isn't
specific to data abort.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Will Deacon <will@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200915104218.1284701-2-maz@kernel.org
|
|
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
kvm_vcpu_dabt_isextabt() is not specific to data aborts and, unlike
kvm_vcpu_dabt_issext(), has nothing to do with sign extension.
Rename it to 'kvm_vcpu_abt_issea()'.
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/r/20200729102821.23392-2-will@kernel.org
|
|
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
SPSR_EL1 being a VNCR-capable register with ARMv8.4-NV, move it to
the sysregs array and update the accessors.
Reviewed-by: James Morse <james.morse@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
As we're about to move SPSR_EL1 into the VNCR page, we need to
disassociate it from the rest of the 32bit cruft. Let's break
the array into individual fields.
Reviewed-by: James Morse <james.morse@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
As ELR-EL1 is a VNCR-capable register with ARMv8.4-NV, let's move it to
the sys_regs array and repaint the accessors. While we're at it, let's
kill the now useless accessors used only on the fault injection path.
Reviewed-by: James Morse <james.morse@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
struct kvm_regs is used by userspace to indicate which register gets
accessed by the {GET,SET}_ONE_REG API. But as we're about to refactor
the layout of the in-kernel register structures, we need the kernel to
move away from it.
Let's make kvm_regs userspace only, and let the kernel map it to its own
internal representation.
Reviewed-by: James Morse <james.morse@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
kvm/arm32 isn't supported since commit 541ad0150ca4 ("arm: Remove
32bit KVM host support"). So HSR isn't meaningful since then. This
renames HSR to ESR accordingly. This shouldn't cause any functional
changes:
* Rename kvm_vcpu_get_hsr() to kvm_vcpu_get_esr() to make the
function names self-explanatory.
* Rename variables from @hsr to @esr to make them self-explanatory.
Note that the renaming on uapi and tracepoint will cause ABI changes,
which we should avoid. Specificly, there are 4 related source files
in this regard:
* arch/arm64/include/uapi/asm/kvm.h (struct kvm_debug_exit_arch::hsr)
* arch/arm64/kvm/handle_exit.c (struct kvm_debug_exit_arch::hsr)
* arch/arm64/kvm/trace_arm.h (tracepoints)
* arch/arm64/kvm/trace_handle_exit.h (tracepoints)
Signed-off-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Andrew Scull <ascull@google.com>
Link: https://lore.kernel.org/r/20200630015705.103366-1-gshan@redhat.com
|
|
With nVHE code now fully separated from the rest of the kernel, the effects of
the __hyp_text macro (which had to be applied on all nVHE code) can be
achieved with build rules instead. The macro used to:
(a) move code to .hyp.text ELF section, now done by renaming .text using
`objcopy`, and
(b) `notrace` and `__noscs` would negate effects of CC_FLAGS_FTRACE and
CC_FLAGS_SCS, respectivelly, now those flags are erased from
KBUILD_CFLAGS (same way as in EFI stub).
Note that by removing __hyp_text from code shared with VHE, all VHE code is now
compiled into .text and without `notrace` and `__noscs`.
Use of '.pushsection .hyp.text' removed from assembly files as this is now also
covered by the build rules.
For MAINTAINERS: if needed to re-run, uses of macro were removed with the
following command. Formatting was fixed up manually.
find arch/arm64/kvm/hyp -type f -name '*.c' -o -name '*.h' \
-exec sed -i 's/ __hyp_text//g' {} +
Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200625131420.71444-15-dbrazdil@google.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for Linux 5.8, take #1
* 32bit VM fixes:
- Fix embarassing mapping issue between AArch32 CSSELR and AArch64
ACTLR
- Add ACTLR2 support for AArch32
- Get rid of the useless ACTLR_EL1 save/restore
- Fix CP14/15 accesses for AArch32 guests on BE hosts
- Ensure that we don't loose any state when injecting a 32bit
exception when running on a VHE host
* 64bit VM fixes:
- Fix PtrAuth host saving happening in preemptible contexts
- Optimize PtrAuth lazy enable
- Drop vcpu to cpu context pointer
- Fix sparse warnings for HYP per-CPU accesses
|
|
When using the PtrAuth feature in a guest, we need to save the host's
keys before allowing the guest to program them. For that, we dump
them in a per-CPU data structure (the so called host context).
But both call sites that do this are in preemptible context,
which may end up in disaster should the vcpu thread get preempted
before reentering the guest.
Instead, save the keys eagerly on each vcpu_load(). This has an
increased overhead, but is at least safe.
Cc: stable@vger.kernel.org
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Merge in user support for Branch Target Identification, which narrowly
missed the cut for 5.7 after a late ABI concern.
* for-next/bti-user:
arm64: bti: Document behaviour for dynamically linked binaries
arm64: elf: Fix allnoconfig kernel build with !ARCH_USE_GNU_PROPERTY
arm64: BTI: Add Kconfig entry for userspace BTI
mm: smaps: Report arm64 guarded pages in smaps
arm64: mm: Display guarded pages in ptdump
KVM: arm64: BTI: Reset BTYPE when skipping emulated instructions
arm64: BTI: Reset BTYPE when skipping emulated instructions
arm64: traps: Shuffle code to eliminate forward declarations
arm64: unify native/compat instruction skipping
arm64: BTI: Decode BYTPE bits when printing PSTATE
arm64: elf: Enable BTI at exec based on ELF program properties
elf: Allow arch to tweak initial mmap prot flags
arm64: Basic Branch Target Identification support
ELF: Add ELF program property parsing support
ELF: UAPI and Kconfig additions for ELF program properties
|
|
Just like for VLPIs, it is beneficial to avoid trapping on WFI when the
vcpu is using the GICv4.1 SGIs.
Add such a check to vcpu_clear_wfx_traps().
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20200304203330.4967-23-maz@kernel.org
|
|
Since normal execution of any non-branch instruction resets the
PSTATE BTYPE field to 0, so do the same thing when emulating a
trapped instruction.
Branches don't trap directly, so we should never need to assign a
non-zero value to BTYPE here.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
On non VHE CPUs, KVM's __hyp_text contains code run at EL2 while the rest
of the kernel runs at EL1. This code lives in its own section with start
and end markers so we can map it to EL2.
The compiler may decide not to inline static-inline functions from the
header file. It may also decide not to put these out-of-line functions
in the same section, meaning they aren't mapped when called at EL2.
Clang-9 does exactly this with __kern_hyp_va() and a few others when
x18 is reserved for the shadow call stack. Add the additional __always_
hint to all the static-inlines that are called from a hyp file.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200220165839.256881-2-james.morse@arm.com
----
kvm_get_hyp_vector() pulls in all the regular per-cpu accessors
and this_cpu_has_cap(), fortunately its only called for VHE.
|
|
Our MMIO handling is a bit odd, in the sense that it uses an
intermediate per-vcpu structure to store the various decoded
information that describe the access.
But the same information is readily available in the HSR/ESR_EL2
field, and we actually use this field to populate the structure.
Let's simplify the whole thing by getting rid of the superfluous
structure and save a (tiny) bit of space in the vcpu structure.
[32bit fix courtesy of Olof Johansson <olof@lixom.net>]
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Confusingly, there are three SPSR layouts that a kernel may need to deal
with:
(1) An AArch64 SPSR_ELx view of an AArch64 pstate
(2) An AArch64 SPSR_ELx view of an AArch32 pstate
(3) An AArch32 SPSR_* view of an AArch32 pstate
When the KVM AArch32 support code deals with SPSR_{EL2,HYP}, it's either
dealing with #2 or #3 consistently. On arm64 the PSR_AA32_* definitions
match the AArch64 SPSR_ELx view, and on arm the PSR_AA32_* definitions
match the AArch32 SPSR_* view.
However, when we inject an exception into an AArch32 guest, we have to
synthesize the AArch32 SPSR_* that the guest will see. Thus, an AArch64
host needs to synthesize layout #3 from layout #2.
This patch adds a new host_spsr_to_spsr32() helper for this, and makes
use of it in the KVM AArch32 support code. For arm64 we need to shuffle
the DIT bit around, and remove the SS bit, while for arm we can use the
value as-is.
I've open-coded the bit manipulation for now to avoid having to rework
the existing PSR_* definitions into PSR64_AA32_* and PSR32_AA32_*
definitions. I hope to perform a more thorough refactoring in future so
that we can handle pstate view manipulation more consistently across the
kernel tree.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200108134324.46500-4-mark.rutland@arm.com
|
|
On AArch64 you can do a sign-extended load to either a 32-bit or 64-bit
register, and we should only sign extend the register up to the width of
the register as specified in the operation (by using the 32-bit Wn or
64-bit Xn register specifier).
As it turns out, the architecture provides this decoding information in
the SF ("Sixty-Four" -- how cute...) bit.
Let's take advantage of this with the usual 32-bit/64-bit header file
dance and do the right thing on AArch64 hosts.
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20191212195055.5541-1-christoffer.dall@arm.com
|
|
|
|
injection
Just like we do for WFE trapping, it can be useful to turn off
WFI trapping when the physical CPU is not oversubscribed (that
is, the vcpu is the only runnable process on this CPU) *and*
that we're using direct injection of interrupts.
The conditions are reevaluated on each vcpu_load(), ensuring that
we don't switch to this mode on a busy system.
On a GICv4 system, this has the effect of reducing the generation
of doorbell interrupts to zero when the right conditions are
met, which is a huge improvement over the current situation
(where the doorbells are screaming if the CPU ever hits a
blocking WFI).
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Reviewed-by: Christoffer Dall <christoffer.dall@arm.com>
Link: https://lore.kernel.org/r/20191107160412.30301-3-maz@kernel.org
|
|
On CPUs that support S2FWB (Armv8.4+), KVM configures the stage 2 page
tables to override the memory attributes of memory accesses, regardless
of the stage 1 page table configurations, and also when the stage 1 MMU
is turned off. This results in all memory accesses to RAM being
cacheable, including during early boot of the guest.
On CPUs without this feature, memory accesses were non-cacheable during
boot until the guest turned on the stage 1 MMU, and we had to detect
when the guest turned on the MMU, such that we could invalidate all cache
entries and ensure a consistent view of memory with the MMU turned on.
When the guest turned on the caches, we would call stage2_flush_vm()
from kvm_toggle_cache().
However, stage2_flush_vm() walks all the stage 2 tables, and calls
__kvm_flush-dcache_pte, which on a system with S2FWB does ... absolutely
nothing.
We can avoid that whole song and dance, and simply not set TVM when
creating a VM on a system that has S2FWB.
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20191028130541.30536-1-christoffer.dall@arm.com
|
|
For a long time, if a guest accessed memory outside of a memslot using
any of the load/store instructions in the architecture which doesn't
supply decoding information in the ESR_EL2 (the ISV bit is not set), the
kernel would print the following message and terminate the VM as a
result of returning -ENOSYS to userspace:
load/store instruction decoding not implemented
The reason behind this message is that KVM assumes that all accesses
outside a memslot is an MMIO access which should be handled by
userspace, and we originally expected to eventually implement some sort
of decoding of load/store instructions where the ISV bit was not set.
However, it turns out that many of the instructions which don't provide
decoding information on abort are not safe to use for MMIO accesses, and
the remaining few that would potentially make sense to use on MMIO
accesses, such as those with register writeback, are not used in
practice. It also turns out that fetching an instruction from guest
memory can be a pretty horrible affair, involving stopping all CPUs on
SMP systems, handling multiple corner cases of address translation in
software, and more. It doesn't appear likely that we'll ever implement
this in the kernel.
What is much more common is that a user has misconfigured his/her guest
and is actually not accessing an MMIO region, but just hitting some
random hole in the IPA space. In this scenario, the error message above
is almost misleading and has led to a great deal of confusion over the
years.
It is, nevertheless, ABI to userspace, and we therefore need to
introduce a new capability that userspace explicitly enables to change
behavior.
This patch introduces KVM_CAP_ARM_NISV_TO_USER (NISV meaning Non-ISV)
which does exactly that, and introduces a new exit reason to report the
event to userspace. User space can then emulate an exception to the
guest, restart the guest, suspend the guest, or take any other
appropriate action as per the policy of the running system.
Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Reviewed-by: Alexander Graf <graf@amazon.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Currently, the {read,write}_sysreg_el*() accessors for accessing
particular ELs' sysregs in the presence of VHE rely on some local
hacks and define their system register encodings in a way that is
inconsistent with the core definitions in <asm/sysreg.h>.
As a result, it is necessary to add duplicate definitions for any
system register that already needs a definition in sysreg.h for
other reasons.
This is a bit of a maintenance headache, and the reasons for the
_el*() accessors working the way they do is a bit historical.
This patch gets rid of the shadow sysreg definitions in
<asm/kvm_hyp.h>, converts the _el*() accessors to use the core
__msr_s/__mrs_s interface, and converts all call sites to use the
standard sysreg #define names (i.e., upper case, with SYS_ prefix).
This patch will conflict heavily anyway, so the opportunity
to clean up some bad whitespace in the context of the changes is
taken.
The change exposes a few system registers that have no sysreg.h
definition, due to msr_s/mrs_s being used in place of msr/mrs:
additions are made in order to fill in the gaps.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoffer Dall <christoffer.dall@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Link: https://www.spinics.net/lists/kvm-arm/msg31717.html
[Rebased to v4.21-rc1]
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
[Rebased to v5.2-rc5, changelog updates]
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
KVM implements the firmware interface for mitigating cache speculation
vulnerabilities. Guests may use this interface to ensure mitigation is
active.
If we want to migrate such a guest to a host with a different support
level for those workarounds, migration might need to fail, to ensure that
critical guests don't loose their protection.
Introduce a way for userland to save and restore the workarounds state.
On restoring we do checks that make sure we don't downgrade our
mitigation level.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details you should have received a copy of the gnu general
public license along with this program if not see http www gnu org
licenses
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 503 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Enrico Weigelt <info@metux.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190602204653.811534538@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
