summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)Author
2014-01-21ARM: shmobile: r8a7790.dtsi: ficx i2c[0-3] clock referenceBen Dooks
The R8A7790's dtsi file i2c0, i2c1, i2c2, and i2c3 nodes have clock references to the mstp3_clks clock node, however these clocks are in the mstp9_clks node. The error was introducted in 72197ca7a1cb1cea5 ("ARM: shmobile: r8a7790: Reference clocks") which is in Simon's current development tree. This patch fixes the following error: of_clk_src_onecell_get: invalid clock index 31 i2c-rcar e6508000.i2c: cannot get clock i2c-rcar: probe of e6508000.i2c failed with error -2 Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-26Revert "ARM: shmobile: r8a7791: Add SSI clocks in device tree"Simon Horman
This reverts commit b652896b02df3dfde3a68957cce01f2aa4585842. Unfortunately this commit prevents multiplatform from booting to the point where a serial console is available. Revert it while a solution is sought. Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-26Revert "ARM: shmobile: r8a7790: Add SSI clocks in device tree"Simon Horman
This reverts commit 6dea2c1ebc6fc43852fd6125d75a75da223ff707. Unfortunately this commit prevents multiplatform from booting to the point where a serial console is available. Revert it while a solution is sought. Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24ARM: shmobile: r8a7791: Add SSI clocks in device treeLaurent Pinchart
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24ARM: shmobile: r8a7790: Add SSI clocks in device treeLaurent Pinchart
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24ARM: shmobile: r8a7791: Add QSPI module clock in device treeLaurent Pinchart
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24ARM: shmobile: r8a7790: Add QSPI module clock in device treeLaurent Pinchart
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24ARM: shmobile: r8a7791: Add MSIOF clocks in device treeLaurent Pinchart
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24ARM: shmobile: r8a7790: Add MSIOF clocks in device treeLaurent Pinchart
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-24ARM: shmobile: Remove Koelsch reference DTSLaurent Pinchart
Now that the DTS file r8a7790-koelsch.dts can be used with board-koelsch.c and board-koelsch-reference.c, proceed with removing r8a7790-koelsch-reference.dts. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-19ARM: shmobile: Remove Lager reference DTSLaurent Pinchart
Now that the DTS file r8a7790-lager.dts can be used with board-lager.c and board-lager-reference.c, proceed with removing r8a7790-lager-reference.dts. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-19ARM: shmobile: koelsch: Specify external clock frequency in DTLaurent Pinchart
The external crystal frequency is 20MHz on the Koelsch board. Specify it in the device tree. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-19ARM: shmobile: lager: Specify external clock frequency in DTLaurent Pinchart
The external crystal frequency is 20MHz on the Lager board. Specify it in the device tree. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-19ARM: shmobile: Sync Koelsch DTS with Koelsch reference DTSLaurent Pinchart
Copy the device nodes from Koelsch reference into the Koeslch device tree file. This will allow us to use a single DTS file regarless of kernel configuration. In case of legacy C board code the device nodes may or may not be used, but in the multiplatform case all the DT device nodes are used. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-19ARM: shmobile: Sync Lager DTS with Lager reference DTSLaurent Pinchart
Copy the device nodes from Lager reference into the Lager device tree file. This will allow us to use a single DTS file regarless of kernel configuration. In case of legacy C board code the device nodes may or may not be used, but in the multiplatform case all the DT device nodes are used. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-19ARM: shmobile: r8a7791: Add clocksLaurent Pinchart
Declare all core clocks and DIV6 clocks, as well as all MSTP clocks currently used by r8a7791 boards. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-19ARM: shmobile: r8a7790: Reference clocksLaurent Pinchart
Reference clocks using a "clocks" property in all nodes corresponding to devices that require a clock. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-19ARM: shmobile: r8a7790: Add clocksLaurent Pinchart
Declare all core clocks and DIV6 clocks, as well as all MSTP clocks currently used by r8a7790 boards. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-19ARM: shmobile: armadillo: dts: Add gpio-keys deviceLaurent Pinchart
The board had 4 buttons connected to GPIOs, add a corresponding gpio-keys device. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-19ARM: shmobile: sh73a0: Specify PFC interrupts in DTLaurent Pinchart
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-19ARM: shmobile: r8a7740: Specify PFC interrupts in DTLaurent Pinchart
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-19ARM: shmobile: r8a73a4: Specify PFC interrupts in DTLaurent Pinchart
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-19ARM: shmobile: armadillo: dts: Add PWM backlight enable GPIOLaurent Pinchart
The Armadillo 800 EVA panel module has a backlight enable signal connected to GPIO 61. Report this in the backlight DT node. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-19ARM: shmobile: armadillo: dts: Add PWM backlight power supplyLaurent Pinchart
Commit 22ceeee16eb8f0d04de3ef43a5174fb30ec18af9 ("pwm-backlight: Add power supply support") added a mandatory power supply for the PWM backlight. Add a fixed 5V regulator and reference it for the backlight power supply. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-19Merge branch 'heads/soc2' into dt3-baseSimon Horman
2013-12-19arm: shmobile: clks: remove duplicated clock from r7s72100Wolfram Sang
Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-19ARM: shmobile: koelsch: Conditionally select MICREL_PHYSimon Horman
The koelsch board uses has an SH ethernet controller which uses a Micrel phy. Select MICREL_PHY for koelsch if SH_ETH is enabled to make use of the Micrel-specific phy driver rather than relying on the generic phy driver. Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-19Merge tag 'v3.13-rc3' into dt3-baseSimon Horman
Linux 3.13-rc3 Conflicts: drivers/pinctrl/sh-pfc/pfc-r8a7740.c drivers/pinctrl/sh-pfc/pfc-sh7372.c
2013-12-19Merge remote-tracking branch 'daniel-lezcano/clockevents/for-Simon-3.13-rc2' ↵Simon Horman
into dt3-base
2013-12-19ARM: shmobile: rcar-gen2: Initialize CCF before clock sourcesLaurent Pinchart
When CONFIG_COMMON_CLOCK is enabled, call rcar_gen2_clocks_init() in the timer init function to initialize the common clock framework before initializing the clock sources. This will take care of clock initialization when the r8a779[01] boards will be switched to multiplatform kernels. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-14ARM: shmobile: Add select MIGHT_HAVE_PCI for PCI-AHB bridge codeBen Dooks
The PCI sub-system is not enabled by default on ARM and on certain Renesas devices the build does not select it. This means that there are configurations that do not allow the AHB-PCI bridge used for the USB sub-systems to be built. For the R8A7790, R8A7791 and EMEV-2 select MIGHT_HAVE_PCI to allow the PCI drivers to be built. Also select MIGHT_HAVE_PCI for the multi-config where there may be many Reneasas devices selected. Reviewed-by: Ian Molton <ian.molton@codethink.co.uk> Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-12ARM: shmobile: koelsch: dts: Add gpio-keys deviceLaurent Pinchart
The board has 7 buttons connected to GPIOs, add a corresponding gpio-keys device. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-12ARM: shmobile: r8a7778: add USB Func DMAEngine supportKuninori Morimoto
HPB-DMAC has 2 channel for USB Func (= D0/D1) D0 is used as Tx, D1 is used as Rx on this patch Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-12ARM: rcar-gen2: Do not setup timer in non-secure modeBen Dooks
If the system has been started in non-secure mode, then the ARM generic timer is not configurable during the kernel initialisation. Currently the only thing we can check for is if the timer has been correctly configured during the boot process. Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Reviewed-by: Ian Molton <ian.molton@codethink.co.uk> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-12ARM: shmobile: r8a7791: add Ether clockSergei Shtylyov
Add support for R8A7791 Ether clock. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-12ARM: shmobile: r8a7778: camera-rcar header cleanupKuninori Morimoto
<linux/platform_data/camera-rcar.h> is needed on BockW, not setup-r8a7778.c Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-12ARM: shmobile: kzm9g: add FSI support for DTSKuninori Morimoto
This patch support FSI-AK4648 with simple audio card Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-12ARM: shmobile: sh73a0: add FSI support via DTSIKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-12ARM: shmobile: sh73a0: add FSI clock support for DTKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-12ARM: shmobile: r8a7790: add I2C supportKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-11ARM: shmobile: r8a7778: add SSIx DMAEngine supportKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-10ARM: shmobile: marzen: enable HSPI0 in DTSSimon Horman
Based on work for the bockw board by Kuninori Morimoto. Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-10ARM: shmobile: r8a7779: add HSPI support to DTSISimon Horman
Based on work for the r8a7778 SoC by Kuninori Morimoto. Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-10ARM: shmobile: Use r8a7779 suffix for INTC compat stringMagnus Damm
Add "renesas,intc-irqpin-r8a7779" to the compatible string for the IRQ pins in case of r8a7779 INTC. This makes the INTC irqpin follow the same style as the other devices and also makes it more future proof. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-10ARM: shmobile: Use r8a7778 suffix for INTC compat stringMagnus Damm
Add "renesas,intc-irqpin-r8a7778" to the compatible string for the IRQ pins in case of r8a7778 INTC. This makes the INTC irqpin follow the same style as the other devices and also makes it more future proof. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-10ARM: shmobile: Use r8a7740 suffix for INTC compat stringMagnus Damm
Add "renesas,intc-irqpin-r8a7740" to the compatible string for the IRQ pins in case of r8a7740 INTC. This makes the INTC irqpin follow the same style as the other devices and also makes it more future proof. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-10ARM: shmobile: Use sh73a0 suffix for INTC compat stringMagnus Damm
Add "renesas,intc-irqpin-sh73a0" to the compatible string for the IRQ pins in case of sh73a0 INTC. This makes the INTC irqpin follow the same style as the other devices and also makes it more future proof. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-10ARM: shmobile: armadillo: add FSI support for DTSKuninori Morimoto
This patch support FSI-WM8978 with simple audio card Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-10ARM: shmobile: r8a7740: add FSI support via DTSIKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-10ARM: shmobile: emev2: Setup internal peripheral interrupts as level highLaurent Pinchart
Interrupts generated by SoC internal devices are currently marked as IRQ_TYPE_NONE. As they're level-triggered and active-high, mark them as such. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-17 09:38:21 +0000