summaryrefslogtreecommitdiff
path: root/block
AgeCommit message (Collapse)Author
2018-07-27Merge tag 'for-linus-20180727' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: "Bigger than usual at this time, mostly due to the O_DIRECT corruption issue and the fact that I was on vacation last week. This contains: - NVMe pull request with two fixes for the FC code, and two target fixes (Christoph) - a DIF bio reset iteration fix (Greg Edwards) - two nbd reply and requeue fixes (Josef) - SCSI timeout fixup (Keith) - a small series that fixes an issue with bio_iov_iter_get_pages(), which ended up causing corruption for larger sized O_DIRECT writes that ended up racing with buffered writes (Martin Wilck)" * tag 'for-linus-20180727' of git://git.kernel.dk/linux-block: block: reset bi_iter.bi_done after splitting bio block: bio_iov_iter_get_pages: pin more pages for multi-segment IOs blkdev: __blkdev_direct_IO_simple: fix leak in error case block: bio_iov_iter_get_pages: fix size of last iovec nvmet: only check for filebacking on -ENOTBLK nvmet: fixup crash on NULL device path scsi: set timed out out mq requests to complete blk-mq: export setting request completion state nvme: if_ready checks to fail io to deleting controller nvmet-fc: fix target sgl list on large transfers nbd: handle unexpected replies better nbd: don't requeue the same request twice.
2018-07-27block: reset bi_iter.bi_done after splitting bioGreg Edwards
After the bio has been updated to represent the remaining sectors, reset bi_done so bio_rewind_iter() does not rewind further than it should. This resolves a bio_integrity_process() failure on reads where the original request was split. Fixes: 63573e359d05 ("bio-integrity: Restore original iterator on verify stage") Signed-off-by: Greg Edwards <gedwards@ddn.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-07-26block: bio_iov_iter_get_pages: pin more pages for multi-segment IOsMartin Wilck
bio_iov_iter_get_pages() currently only adds pages for the next non-zero segment from the iov_iter to the bio. That's suboptimal for callers, which typically try to pin as many pages as fit into the bio. This patch converts the current bio_iov_iter_get_pages() into a static helper, and introduces a new helper that allocates as many pages as 1) fit into the bio, 2) are present in the iov_iter, 3) and can be pinned by MM. Error is returned only if zero pages could be pinned. Because of 3), a zero return value doesn't necessarily mean all pages have been pinned. Callers that have to pin every page in the iov_iter must still call this function in a loop (this is currently the case). This change matters most for __blkdev_direct_IO_simple(), which calls bio_iov_iter_get_pages() only once. If it obtains less pages than requested, it returns a "short write" or "short read", and __generic_file_write_iter() falls back to buffered writes, which may lead to data corruption. Fixes: 72ecad22d9f1 ("block: support a full bio worth of IO for simplified bdev direct-io") Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin Wilck <mwilck@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-07-26block: bio_iov_iter_get_pages: fix size of last iovecMartin Wilck
If the last page of the bio is not "full", the length of the last vector slot needs to be corrected. This slot has the index (bio->bi_vcnt - 1), but only in bio->bi_io_vec. In the "bv" helper array, which is shifted by the value of bio->bi_vcnt at function invocation, the correct index is (nr_pages - 1). v2: improved readability following suggestions from Ming Lei. v3: followed a formatting suggestion from Christoph Hellwig. Fixes: 2cefe4dbaadf ("block: add bio_iov_iter_get_pages()") Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin Wilck <mwilck@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-07-24blk-mq: export setting request completion stateKeith Busch
This is preparing for drivers that want to directly alter the state of their requests. No functional change here. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-07-14Merge tag 'for-linus-20180713' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fix from Jens Axboe: "Just a single regression fix (from 4.17) for bsg, fixing an EINVAL return on non-data commands" * tag 'for-linus-20180713' of git://git.kernel.dk/linux-block: bsg: fix bogus EINVAL on non-data commands
2018-07-11bsg: fix bogus EINVAL on non-data commandsTony Battersby
Fix a regression introduced in Linux kernel 4.17 where sending a SCSI command that does not transfer data (such as TEST UNIT READY) via /dev/bsg/* results in EINVAL. Fixes: 17cb960f29c2 ("bsg: split handling of SCSI CDBs vs transport requeues") Cc: <stable@vger.kernel.org> # 4.17+ Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Tony Battersby <tonyb@cybernetics.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-06-30Merge tag 'for-linus-20180629' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: "Small set of fixes for this series. Mostly just minor fixes, the only oddball in here is the sg change. The sg change came out of the stall fix for NVMe, where we added a mempool and limited us to a single page allocation. CONFIG_SG_DEBUG sort-of ruins that, since we'd need to account for that. That's actually a generic problem, since lots of drivers need to allocate SG lists. So this just removes support for CONFIG_SG_DEBUG, which I added back in 2007 and to my knowledge it was never useful. Anyway, outside of that, this pull contains: - clone of request with special payload fix (Bart) - drbd discard handling fix (Bart) - SATA blk-mq stall fix (me) - chunk size fix (Keith) - double free nvme rdma fix (Sagi)" * tag 'for-linus-20180629' of git://git.kernel.dk/linux-block: sg: remove ->sg_magic member drbd: Fix drbd_request_prepare() discard handling blk-mq: don't queue more if we get a busy return block: Fix cloning of requests with a special payload nvme-rdma: fix possible double free of controller async event buffer block: Fix transfer when chunk sectors exceeds max
2018-06-29blk-mq: don't queue more if we get a busy returnJens Axboe
Some devices have different queue limits depending on the type of IO. A classic case is SATA NCQ, where some commands can queue, but others cannot. If we have NCQ commands inflight and encounter a non-queueable command, the driver returns busy. Currently we attempt to dispatch more from the scheduler, if we were able to queue some commands. But for the case where we ended up stopping due to BUSY, we should not attempt to retrieve more from the scheduler. If we do, we can get into a situation where we attempt to queue a non-queueable command, get BUSY, then successfully retrieve more commands from that scheduler and queue those. This can repeat forever, starving the non-queuable command indefinitely. Fix this by NOT attempting to pull more commands from the scheduler, if we get a BUSY return. This should also be more optimal in terms of letting requests stay in the scheduler for as long as possible, if we get a BUSY due to the regular out-of-tags condition. Reviewed-by: Omar Sandoval <osandov@fb.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-06-28block: Fix cloning of requests with a special payloadBart Van Assche
This patch avoids that removing a path controlled by the dm-mpath driver while mkfs is running triggers the following kernel bug: kernel BUG at block/blk-core.c:3347! invalid opcode: 0000 [#1] PREEMPT SMP KASAN CPU: 20 PID: 24369 Comm: mkfs.ext4 Not tainted 4.18.0-rc1-dbg+ #2 RIP: 0010:blk_end_request_all+0x68/0x70 Call Trace: <IRQ> dm_softirq_done+0x326/0x3d0 [dm_mod] blk_done_softirq+0x19b/0x1e0 __do_softirq+0x128/0x60d irq_exit+0x100/0x110 smp_call_function_single_interrupt+0x90/0x330 call_function_single_interrupt+0xf/0x20 </IRQ> Fixes: f9d03f96b988 ("block: improve handling of the magic discard payload") Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Cc: <stable@vger.kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-06-24Merge tag 'for-linus-20180623' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: - Further timeout fixes. We aren't quite there yet, so expect another round of fixes for that to completely close some of the IRQ vs completion races. (Christoph/Bart) - Set of NVMe fixes from the usual suspects, mostly error handling - Two off-by-one fixes (Dan) - Another bdi race fix (Jan) - Fix nbd reconfigure with NBD_DISCONNECT_ON_CLOSE (Doron) * tag 'for-linus-20180623' of git://git.kernel.dk/linux-block: blk-mq: Fix timeout handling in case the timeout handler returns BLK_EH_DONE bdi: Fix another oops in wb_workfn() lightnvm: Remove depends on HAS_DMA in case of platform dependency nvme-pci: limit max IO size and segments to avoid high order allocations nvme-pci: move nvme_kill_queues to nvme_remove_dead_ctrl nvme-fc: release io queues to allow fast fail nbd: Add the nbd NBD_DISCONNECT_ON_CLOSE config flag. block: sed-opal: Fix a couple off by one bugs blk-mq-debugfs: Off by one in blk_mq_rq_state_name() nvmet: reset keep alive timer in controller enable nvme-rdma: don't override opts->queue_size nvme-rdma: Fix command completion race at error recovery nvme-rdma: fix possible free of a non-allocated async event buffer nvme-rdma: fix possible double free condition when failing to create a controller Revert "block: Add warning for bi_next not NULL in bio_endio()" block: fix timeout changes for legacy request drivers
2018-06-23blk-mq: Fix timeout handling in case the timeout handler returns BLK_EH_DONEBart Van Assche
Make sure that RQF_TIMED_OUT is cleared when a request is reused after a block driver timeout handler has returned BLK_EH_DONE. Fixes: da6612673988 ("blk-mq: don't time out requests again that are in the timeout handler") Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Jianchao Wang <jianchao.w.wang@oracle.com> Cc: Andrew Randrianasulu <randrianasulu@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-06-20block: sed-opal: Fix a couple off by one bugsDan Carpenter
resp->num is the number of tokens in resp->tok[]. It gets set in response_parse(). So if n == resp->num then we're reading beyond the end of the data. Fixes: 455a7b238cd6 ("block: Add Sed-opal library") Reviewed-by: Scott Bauer <scott.bauer@intel.com> Tested-by: Scott Bauer <scott.bauer@intel.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-06-20blk-mq-debugfs: Off by one in blk_mq_rq_state_name()Dan Carpenter
If rq_state == ARRAY_SIZE() then we read one element beyond the end of the blk_mq_rq_state_name_array[] array. Fixes: ec6dcf63c55c ("blk-mq-debugfs: Show more request state information") Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-06-19Revert "block: Add warning for bi_next not NULL in bio_endio()"Bart Van Assche
Commit 0ba99ca4838b ("block: Add warning for bi_next not NULL in bio_endio()") breaks the dm driver. end_clone_bio() detects whether or not a bio is the last bio associated with a request by checking the .bi_next field. Commit 0ba99ca4838b clears that field before end_clone_bio() has had a chance to inspect that field. Hence revert commit 0ba99ca4838b. This patch avoids that KASAN reports the following complaint when running the srp-test software (srp-test/run_tests -c -d -r 10 -t 02-mq): ================================================================== BUG: KASAN: use-after-free in bio_advance+0x11b/0x1d0 Read of size 4 at addr ffff8801300e06d0 by task ksoftirqd/0/9 CPU: 0 PID: 9 Comm: ksoftirqd/0 Not tainted 4.18.0-rc1-dbg+ #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014 Call Trace: dump_stack+0xa4/0xf5 print_address_description+0x6f/0x270 kasan_report+0x241/0x360 __asan_load4+0x78/0x80 bio_advance+0x11b/0x1d0 blk_update_request+0xa7/0x5b0 scsi_end_request+0x56/0x320 [scsi_mod] scsi_io_completion+0x7d6/0xb20 [scsi_mod] scsi_finish_command+0x1c0/0x280 [scsi_mod] scsi_softirq_done+0x19a/0x230 [scsi_mod] blk_mq_complete_request+0x160/0x240 scsi_mq_done+0x50/0x1a0 [scsi_mod] srp_recv_done+0x515/0x1330 [ib_srp] __ib_process_cq+0xa0/0xf0 [ib_core] ib_poll_handler+0x38/0xa0 [ib_core] irq_poll_softirq+0xe8/0x1f0 __do_softirq+0x128/0x60d run_ksoftirqd+0x3f/0x60 smpboot_thread_fn+0x352/0x460 kthread+0x1c1/0x1e0 ret_from_fork+0x24/0x30 Allocated by task 1918: save_stack+0x43/0xd0 kasan_kmalloc+0xad/0xe0 kasan_slab_alloc+0x11/0x20 kmem_cache_alloc+0xfe/0x350 mempool_alloc_slab+0x15/0x20 mempool_alloc+0xfb/0x270 bio_alloc_bioset+0x244/0x350 submit_bh_wbc+0x9c/0x2f0 __block_write_full_page+0x299/0x5a0 block_write_full_page+0x16b/0x180 blkdev_writepage+0x18/0x20 __writepage+0x42/0x80 write_cache_pages+0x376/0x8a0 generic_writepages+0xbe/0x110 blkdev_writepages+0xe/0x10 do_writepages+0x9b/0x180 __filemap_fdatawrite_range+0x178/0x1c0 file_write_and_wait_range+0x59/0xc0 blkdev_fsync+0x46/0x80 vfs_fsync_range+0x66/0x100 do_fsync+0x3d/0x70 __x64_sys_fsync+0x21/0x30 do_syscall_64+0x77/0x230 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 9: save_stack+0x43/0xd0 __kasan_slab_free+0x137/0x190 kasan_slab_free+0xe/0x10 kmem_cache_free+0xd3/0x380 mempool_free_slab+0x17/0x20 mempool_free+0x63/0x160 bio_free+0x81/0xa0 bio_put+0x59/0x60 end_bio_bh_io_sync+0x5d/0x70 bio_endio+0x1a7/0x360 blk_update_request+0xd0/0x5b0 end_clone_bio+0xa3/0xd0 [dm_mod] bio_endio+0x1a7/0x360 blk_update_request+0xd0/0x5b0 scsi_end_request+0x56/0x320 [scsi_mod] scsi_io_completion+0x7d6/0xb20 [scsi_mod] scsi_finish_command+0x1c0/0x280 [scsi_mod] scsi_softirq_done+0x19a/0x230 [scsi_mod] blk_mq_complete_request+0x160/0x240 scsi_mq_done+0x50/0x1a0 [scsi_mod] srp_recv_done+0x515/0x1330 [ib_srp] __ib_process_cq+0xa0/0xf0 [ib_core] ib_poll_handler+0x38/0xa0 [ib_core] irq_poll_softirq+0xe8/0x1f0 __do_softirq+0x128/0x60d The buggy address belongs to the object at ffff8801300e0640 which belongs to the cache bio-0 of size 200 The buggy address is located 144 bytes inside of 200-byte region [ffff8801300e0640, ffff8801300e0708) The buggy address belongs to the page: page:ffffea0004c03800 count:1 mapcount:0 mapping:ffff88015a563a00 index:0x0 compound_mapcount: 0 flags: 0x8000000000008100(slab|head) raw: 8000000000008100 dead000000000100 dead000000000200 ffff88015a563a00 raw: 0000000000000000 0000000000330033 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8801300e0580: fb fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc ffff8801300e0600: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb >ffff8801300e0680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8801300e0700: fb fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff8801300e0780: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ================================================================== Cc: Kent Overstreet <kent.overstreet@gmail.com> Fixes: 0ba99ca4838b ("block: Add warning for bi_next not NULL in bio_endio()") Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-06-19block: fix timeout changes for legacy request driversChristoph Hellwig
blk_mq_complete_request can only be called for blk-mq drivers, but when removing the BLK_EH_HANDLED return value, two legacy request timeout methods incorrectly got switched to call blk_mq_complete_request. Call __blk_complete_request instead to reinstance the previous behavior. For that __blk_complete_request needs to be exported. Fixes: 1fc2b62e ("scsi_transport_fc: complete requests from ->timeout") Fixes: 0df0bb08 ("null_blk: complete requests from ->timeout") Reported-by: Jianchao Wang <jianchao.w.wang@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-06-17Merge tag 'for-linus-20180616' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: "A collection of fixes that should go into -rc1. This contains: - bsg_open vs bsg_unregister race fix (Anatoliy) - NVMe pull request from Christoph, with fixes for regressions in this window, FC connect/reconnect path code unification, and a trace point addition. - timeout fix (Christoph) - remove a few unused functions (Christoph) - blk-mq tag_set reinit fix (Roman)" * tag 'for-linus-20180616' of git://git.kernel.dk/linux-block: bsg: fix race of bsg_open and bsg_unregister block: remov blk_queue_invalidate_tags nvme-fabrics: fix and refine state checks in __nvmf_check_ready nvme-fabrics: handle the admin-only case properly in nvmf_check_ready nvme-fabrics: refactor queue ready check blk-mq: remove blk_mq_tagset_iter nvme: remove nvme_reinit_tagset nvme-fc: fix nulling of queue data on reconnect nvme-fc: remove reinit_request routine blk-mq: don't time out requests again that are in the timeout handler nvme-fc: change controllers first connect to use reconnect path nvme: don't rely on the changed namespace list log nvmet: free smart-log buffer after use nvme-rdma: fix error flow during mapping request data nvme: add bio remapping tracepoint nvme: fix NULL pointer dereference in nvme_init_subsystem blk-mq: reinit q->tag_set_list entry only after grace period
2018-06-15docs: Fix some broken referencesMauro Carvalho Chehab
As we move stuff around, some doc references are broken. Fix some of them via this script: ./scripts/documentation-file-ref-check --fix Manually checked if the produced result is valid, removing a few false-positives. Acked-by: Takashi Iwai <tiwai@suse.de> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Coly Li <colyli@suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Acked-by: Jonathan Corbet <corbet@lwn.net>
2018-06-15bsg: fix race of bsg_open and bsg_unregisterAnatoliy Glagolev
The existing implementation allows races between bsg_unregister and bsg_open paths. bsg_unregister and request_queue cleanup and deletion may start and complete right after bsg_get_device (in bsg_open path) retrieves bsg_class_device and releases the mutex. Then bsg_open path touches freed memory of bsg_class_device and request_queue. One possible fix is to hold the mutex all the way through bsg_get_device instead of releasing it after bsg_class_device retrieval. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-Off-By: Anatoliy Glagolev <glagolig@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-06-15block: remov blk_queue_invalidate_tagsChristoph Hellwig
This function is entirely unused, so remove it and the tag_queue_busy member of struct request_queue. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-06-15Merge branch 'nvme-4.18' of git://git.infradead.org/nvme into for-linusJens Axboe
Pull NVMe fixes from Christoph: "Fix various little regressions introduced in this merge window, plus a rework of the fibre channel connect and reconnect path to share the code instead of having separate sets of bugs. Last but not least a trivial trace point addition from Hannes." * 'nvme-4.18' of git://git.infradead.org/nvme: nvme-fabrics: fix and refine state checks in __nvmf_check_ready nvme-fabrics: handle the admin-only case properly in nvmf_check_ready nvme-fabrics: refactor queue ready check blk-mq: remove blk_mq_tagset_iter nvme: remove nvme_reinit_tagset nvme-fc: fix nulling of queue data on reconnect nvme-fc: remove reinit_request routine nvme-fc: change controllers first connect to use reconnect path nvme: don't rely on the changed namespace list log nvmet: free smart-log buffer after use nvme-rdma: fix error flow during mapping request data nvme: add bio remapping tracepoint nvme: fix NULL pointer dereference in nvme_init_subsystem
2018-06-14blk-mq: remove blk_mq_tagset_iterChristoph Hellwig
Unused now that nvme stopped using it. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jens Axboe <axboe@kernel.dk>
2018-06-14blk-mq: don't time out requests again that are in the timeout handlerChristoph Hellwig
We can currently call the timeout handler again on a request that has already been handed over to the timeout handler. Prevent that with a new flag. Fixes: 12f5b931 ("blk-mq: Remove generation seqeunce") Reported-by: Andrew Randrianasulu <randrianasulu@gmail.com> Tested-by: Andrew Randrianasulu <randrianasulu@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-06-12treewide: Use array_size() in vzalloc()Kees Cook
The vzalloc() function has no 2-factor argument form, so multiplication factors need to be wrapped in array_size(). This patch replaces cases of: vzalloc(a * b) with: vzalloc(array_size(a, b)) as well as handling cases of: vzalloc(a * b * c) with: vzalloc(array3_size(a, b, c)) This does, however, attempt to ignore constant size factors like: vzalloc(4 * 1024) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( vzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | vzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( vzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(u8) * COUNT + COUNT , ...) | vzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | vzalloc( - sizeof(char) * COUNT + COUNT , ...) | vzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( vzalloc( - sizeof(TYPE) * (COUNT_ID) + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT_ID + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT_CONST + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vzalloc( - sizeof(THING) * (COUNT_ID) + array_size(COUNT_ID, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT_ID + array_size(COUNT_ID, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT_CONST + array_size(COUNT_CONST, sizeof(THING)) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ vzalloc( - SIZE * COUNT + array_size(COUNT, SIZE) , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( vzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( vzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | vzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( vzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( vzalloc(C1 * C2 * C3, ...) | vzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants. @@ expression E1, E2; constant C1, C2; @@ ( vzalloc(C1 * C2, ...) | vzalloc( - E1 * E2 + array_size(E1, E2) , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12treewide: kvmalloc() -> kvmalloc_array()Kees Cook
The kvmalloc() function has a 2-factor argument form, kvmalloc_array(). This patch replaces cases of: kvmalloc(a * b, gfp) with: kvmalloc_array(a * b, gfp) as well as handling cases of: kvmalloc(a * b * c, gfp) with: kvmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kvmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kvmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kvmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kvmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kvmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kvmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kvmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kvmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kvmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kvmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kvmalloc( - sizeof(char) * COUNT + COUNT , ...) | kvmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kvmalloc + kvmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kvmalloc + kvmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kvmalloc + kvmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kvmalloc + kvmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kvmalloc + kvmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kvmalloc + kvmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kvmalloc + kvmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kvmalloc + kvmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kvmalloc + kvmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kvmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kvmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kvmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kvmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kvmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kvmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kvmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kvmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kvmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kvmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kvmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kvmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kvmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kvmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kvmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kvmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kvmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kvmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kvmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kvmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kvmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kvmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kvmalloc(C1 * C2 * C3, ...) | kvmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kvmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kvmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kvmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kvmalloc(sizeof(THING) * C2, ...) | kvmalloc(sizeof(TYPE) * C2, ...) | kvmalloc(C1 * C2 * C3, ...) | kvmalloc(C1 * C2, ...) | - kvmalloc + kvmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kvmalloc + kvmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kvmalloc + kvmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kvmalloc + kvmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kvmalloc + kvmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kvmalloc + kvmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kvmalloc + kvmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12treewide: kzalloc_node() -> kcalloc_node()Kees Cook
The kzalloc_node() function has a 2-factor argument form, kcalloc_node(). This patch replaces cases of: kzalloc_node(a * b, gfp, node) with: kcalloc_node(a * b, gfp, node) as well as handling cases of: kzalloc_node(a * b * c, gfp, node) with: kzalloc_node(array3_size(a, b, c), gfp, node) as it's slightly less ugly than: kcalloc_node(array_size(a, b), c, gfp, node) This does, however, attempt to ignore constant size factors like: kzalloc_node(4 * 1024, gfp, node) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc_node( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc_node( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc_node( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc_node( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc_node( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc_node( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc_node( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc_node( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc_node( - sizeof(char) * COUNT + COUNT , ...) | kzalloc_node( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc_node + kcalloc_node ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc_node + kcalloc_node ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc_node + kcalloc_node ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc_node + kcalloc_node ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc_node + kcalloc_node ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc_node + kcalloc_node ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc_node + kcalloc_node ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc_node + kcalloc_node ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc_node + kcalloc_node ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc_node( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc_node( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc_node( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc_node( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc_node( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc_node( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc_node( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc_node( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc_node( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc_node( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc_node( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc_node( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc_node( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc_node( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc_node( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc_node( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc_node( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc_node( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc_node( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc_node( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc_node( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc_node( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc_node(C1 * C2 * C3, ...) | kzalloc_node( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc_node( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc_node( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc_node( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc_node(sizeof(THING) * C2, ...) | kzalloc_node(sizeof(TYPE) * C2, ...) | kzalloc_node(C1 * C2 * C3, ...) | kzalloc_node(C1 * C2, ...) | - kzalloc_node + kcalloc_node ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc_node + kcalloc_node ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc_node + kcalloc_node ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc_node + kcalloc_node ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc_node + kcalloc_node ( - (E1) * E2 + E1, E2 , ...) | - kzalloc_node + kcalloc_node ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc_node + kcalloc_node ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12treewide: kmalloc() -> kmalloc_array()Kees Cook
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-11blk-mq: reinit q->tag_set_list entry only after grace periodRoman Pen
It is not allowed to reinit q->tag_set_list list entry while RCU grace period has not completed yet, otherwise the following soft lockup in blk_mq_sched_restart() happens: [ 1064.252652] watchdog: BUG: soft lockup - CPU#12 stuck for 23s! [fio:9270] [ 1064.254445] task: ffff99b912e8b900 task.stack: ffffa6d54c758000 [ 1064.254613] RIP: 0010:blk_mq_sched_restart+0x96/0x150 [ 1064.256510] Call Trace: [ 1064.256664] <IRQ> [ 1064.256824] blk_mq_free_request+0xea/0x100 [ 1064.256987] msg_io_conf+0x59/0xd0 [ibnbd_client] [ 1064.257175] complete_rdma_req+0xf2/0x230 [ibtrs_client] [ 1064.257340] ? ibtrs_post_recv_empty+0x4d/0x70 [ibtrs_core] [ 1064.257502] ibtrs_clt_rdma_done+0xd1/0x1e0 [ibtrs_client] [ 1064.257669] ib_create_qp+0x321/0x380 [ib_core] [ 1064.257841] ib_process_cq_direct+0xbd/0x120 [ib_core] [ 1064.258007] irq_poll_softirq+0xb7/0xe0 [ 1064.258165] __do_softirq+0x106/0x2a2 [ 1064.258328] irq_exit+0x92/0xa0 [ 1064.258509] do_IRQ+0x4a/0xd0 [ 1064.258660] common_interrupt+0x7a/0x7a [ 1064.258818] </IRQ> Meanwhile another context frees other queue but with the same set of shared tags: [ 1288.201183] INFO: task bash:5910 blocked for more than 180 seconds. [ 1288.201833] bash D 0 5910 5820 0x00000000 [ 1288.202016] Call Trace: [ 1288.202315] schedule+0x32/0x80 [ 1288.202462] schedule_timeout+0x1e5/0x380 [ 1288.203838] wait_for_completion+0xb0/0x120 [ 1288.204137] __wait_rcu_gp+0x125/0x160 [ 1288.204287] synchronize_sched+0x6e/0x80 [ 1288.204770] blk_mq_free_queue+0x74/0xe0 [ 1288.204922] blk_cleanup_queue+0xc7/0x110 [ 1288.205073] ibnbd_clt_unmap_device+0x1bc/0x280 [ibnbd_client] [ 1288.205389] ibnbd_clt_unmap_dev_store+0x169/0x1f0 [ibnbd_client] [ 1288.205548] kernfs_fop_write+0x109/0x180 [ 1288.206328] vfs_write+0xb3/0x1a0 [ 1288.206476] SyS_write+0x52/0xc0 [ 1288.206624] do_syscall_64+0x68/0x1d0 [ 1288.206774] entry_SYSCALL_64_after_hwframe+0x3d/0xa2 What happened is the following: 1. There are several MQ queues with shared tags. 2. One queue is about to be freed and now task is in blk_mq_del_queue_tag_set(). 3. Other CPU is in blk_mq_sched_restart() and loops over all queues in tag list in order to find hctx to restart. Because linked list entry was modified in blk_mq_del_queue_tag_set() without proper waiting for a grace period, blk_mq_sched_restart() never ends, spining in list_for_each_entry_rcu_rr(), thus soft lockup. Fix is simple: reinit list entry after an RCU grace period elapsed. Fixes: Fixes: 705cda97ee3a ("blk-mq: Make it safe to use RCU to iterate over blk_mq_tag_set.tag_list") Cc: stable@vger.kernel.org Cc: Sagi Grimberg <sagi@grimberg.me> Cc: linux-block@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Roman Pen <roman.penyaev@profitbricks.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-06-10Merge tag 'for-linus-20180610' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block flush handling fix from Jens Axboe: "Single fix that we should merge now, fixing a regression in queuing flush request, accessing request flags after calling the end_request handler" * tag 'for-linus-20180610' of git://git.kernel.dk/linux-block: block: fix use-after-free in block flush handling
2018-06-09block: fix use-after-free in block flush handlingJens Axboe
A recent commit reused the original request flags for the flush queue handling. However, for some of the kick flush cases, the original request was already completed. This caused a use after free, if blk-mq wasn't used. Fixes: 84fca1b0c461 ("block: pass failfast and driver-specific flags to flush requests") Reported-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-06-08Merge tag 'for-linus-20180608' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: "A few fixes for this merge window, where some of them should go in sooner rather than later, hence a new pull this week. This pull request contains: - Set of NVMe fixes, mostly follow up cleanups/fixes to the queue changes, but also teardown/removal and misc changes (Christop/Dan/ Johannes/Sagi/Steve). - Two lightnvm fixes for issues that showed up in this window (Colin/Wei). - Failfast/driver flags inheritance for flush requests (Hannes). - The md device put sanitization and fix (Kent). - dm bio_set inheritance fix (me). - nbd discard granularity fix (Josef). - nbd consistency in command printing (Kevin). - Loop recursion validation fix (Ted). - Partition overlap check (Wang)" [ .. and now my build is warning-free again thanks to the md fix - Linus ] * tag 'for-linus-20180608' of git://git.kernel.dk/linux-block: (22 commits) nvme: cleanup double shift issue nvme-pci: make CMB SQ mod-param read-only nvme-pci: unquiesce dead controller queues nvme-pci: remove HMB teardown on reset nvme-pci: queue creation fixes nvme-pci: remove unnecessary completion doorbell check nvme-pci: remove unnecessary nested locking nvmet: filter newlines from user input nvme-rdma: correctly check for target keyed sgl support nvme: don't hold nvmf_transports_rwsem for more than transport lookups nvmet: return all zeroed buffer when we can't find an active namespace md: Unify mddev destruction paths dm: use bioset_init_from_src() to copy bio_set block: add bioset_init_from_src() helper block: always set partition number to '0' in blk_partition_remap() block: pass failfast and driver-specific flags to flush requests nbd: set discard_alignment to the granularity nbd: Consistently use request pointer in debug messages. block: add verifier for cmdline partition lightnvm: pblk: fix resource leak of invalid_bitmap ...
2018-06-08Merge branch 'work.aio' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull aio iopriority support from Al Viro: "The rest of aio stuff for this cycle - Adam's aio ioprio series" * 'work.aio' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fs: aio ioprio use ioprio_check_cap ret val fs: aio ioprio add explicit block layer dependence fs: iomap dio set bio prio from kiocb prio fs: blkdev set bio prio from kiocb prio fs: Add aio iopriority support fs: Convert kiocb rw_hint from enum to u16 block: add ioprio_check_cap function
2018-06-08block: add bioset_init_from_src() helperJens Axboe
Add a helper that allows a caller to initialize a new bio_set, using the settings from an existing bio_set. Reported-by: Venkat R.B <vrbagal1@linux.vnet.ibm.com> Tested-by: Venkat R.B <vrbagal1@linux.vnet.ibm.com> Tested-by: Li Wang <liwang@redhat.com> Reviewed-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-06-07block: always set partition number to '0' in blk_partition_remap()Hannes Reinecke
blk_partition_remap() will only clear bi_partno if an actual remapping has happened. But flush request et al don't have an actual size, so the remapping doesn't happen and bi_partno is never cleared. So for stacked devices blk_partition_remap() will be called on each level. If (as is the case for native nvme multipathing) one of the lower-level devices do _not_support partitioning a spurious I/O error is generated. Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-06-06block: pass failfast and driver-specific flags to flush requestsHannes Reinecke
If flush requests are being sent to the device we need to inherit the failfast and driver-specific flags, too, otherwise I/O will fail. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-06-05Merge tag 'xfs-4.18-merge-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds
Pull xfs updates from Darrick Wong: "New features this cycle include the ability to relabel mounted filesystems, support for fallocated swapfiles, and using FUA for pure data O_DSYNC directio writes. With this cycle we begin to integrate online filesystem repair and refactor the growfs code in preparation for eventual subvolume support, though the road ahead for both features is quite long. There are also numerous refactorings of the iomap code to remove unnecessary log overhead, to disentangle some of the quota code, and to prepare for buffer head removal in a future upstream kernel. Metadata validation continues to improve, both in the hot path veifiers and the online filesystem check code. I anticipate sending a second pull request in a few days with more metadata validation improvements. This series has been run through a full xfstests run over the weekend and through a quick xfstests run against this morning's master, with no major failures reported. Summary: - Strengthen inode number and structure validation when allocating inodes. - Reduce pointless buffer allocations during cache miss - Use FUA for pure data O_DSYNC directio writes - Various iomap refactorings - Strengthen quota metadata verification to avoid unfixable broken quota - Make AGFL block freeing a deferred operation to avoid blowing out transaction reservations when running complex operations - Get rid of the log item descriptors to reduce log overhead - Fix various reflink bugs where inodes were double-joined to transactions - Don't issue discards when trimming unwritten extents - Refactor incore dquot initialization and retrieval interfaces - Fix some locking problmes in the quota scrub code - Strengthen btree structure checks in scrub code - Rewrite swapfile activation to use iomap and support unwritten extents - Make scrub exit to userspace sooner when corruptions or cross-referencing problems are found - Make scrub invoke the data fork scrubber directly on metadata inodes - Don't do background reclamation of post-eof and cow blocks when the fs is suspended - Fix secondary superblock buffer lifespan hinting - Refactor growfs to use table-dispatched functions instead of long stringy functions - Move growfs code to libxfs - Implement online fs label getting and setting - Introduce online filesystem repair (in a very limited capacity) - Fix unit conversion problems in the realtime freemap iteration functions - Various refactorings and cleanups in preparation to remove buffer heads in a future release - Reimplement the old bmap call with iomap - Remove direct buffer head accesses from seek hole/data - Various bug fixes" * tag 'xfs-4.18-merge-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (121 commits) fs: use ->is_partially_uptodate in page_cache_seek_hole_data fs: remove the buffer_unwritten check in page_seek_hole_data fs: move page_cache_seek_hole_data to iomap.c xfs: use iomap_bmap iomap: add an iomap-based bmap implementation iomap: add a iomap_sector helper iomap: use __bio_add_page in iomap_dio_zero iomap: move IOMAP_F_BOUNDARY to gfs2 iomap: fix the comment describing IOMAP_NOWAIT iomap: inline data should be an iomap type, not a flag mm: split ->readpages calls to avoid non-contiguous pages lists mm: return an unsigned int from __do_page_cache_readahead mm: give the 'ret' variable a better name __do_page_cache_readahead block: add a lower-level bio_add_page interface xfs: fix error handling in xfs_refcount_insert() xfs: fix xfs_rtalloc_rec units xfs: strengthen rtalloc query range checks xfs: xfs_rtbuf_get should check the bmapi_read results xfs: xfs_rtword_t should be unsigned, not signed dax: change bdev_dax_supported() to support boolean returns ...
2018-06-05block: add verifier for cmdline partitionWang YanQing
I meet strange filesystem corruption issue recently, the reason is there are overlaps partitions in cmdline partition argument. This patch add verifier for cmdline partition, then if there are overlaps partitions, cmdline_partition will log a warning. We don't treat overlaps partition as a error: " Caizhiyong <caizhiyong@hisilicon.com> said: Partition overlap was intentionally designed in this cmdline partition. reference http://lists.infradead.org/pipermail/linux-mtd/2013-August/048092.html " Signed-off-by: Wang YanQing <udknight@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-06-04blk-mq: return when hctx is stopped in blk_mq_run_work_fnJianchao Wang
If a hardware queue is stopped, it should not be run again before explicitly started. Ignore stopped queues in blk_mq_run_work_fn(), fixing a regression recently introduced when the START_ON_RUN bit was removed. Fixes: 15fe8a90bb45 ("blk-mq: remove blk_mq_delay_queue()") Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-06-04Merge branch 'hch.procfs' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull procfs updates from Al Viro: "Christoph's proc_create_... cleanups series" * 'hch.procfs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (44 commits) xfs, proc: hide unused xfs procfs helpers isdn/gigaset: add back gigaset_procinfo assignment proc: update SIZEOF_PDE_INLINE_NAME for the new pde fields tty: replace ->proc_fops with ->proc_show ide: replace ->proc_fops with ->proc_show ide: remove ide_driver_proc_write isdn: replace ->proc_fops with ->proc_show atm: switch to proc_create_seq_private atm: simplify procfs code bluetooth: switch to proc_create_seq_data netfilter/x_tables: switch to proc_create_seq_private netfilter/xt_hashlimit: switch to proc_create_{seq,single}_data neigh: switch to proc_create_seq_data hostap: switch to proc_create_{seq,single}_data bonding: switch to proc_create_seq_data rtc/proc: switch to proc_create_single_data drbd: switch to proc_create_single resource: switch to proc_create_seq_data staging/rtl8192u: simplify procfs code jfs: simplify procfs code ...
2018-06-02blk-mq: update nr_requests when switching to 'none' schedulerMing Lei
Now we setup q->nr_requests when switching to one new scheduler, but not do it for 'none', then q->nr_requests may not be correct for 'none'. This patch fixes this issue by always updating 'nr_requests' when switching to 'none'. Cc: Marco Patalano <mpatalan@redhat.com> Cc: "Ewan D. Milne" <emilne@redhat.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-06-02block: don't use blocking queue entered for recursive bio submitsJens Axboe
If we end up splitting a bio and the queue goes away between the initial submission and the later split submission, then we can block forever in blk_queue_enter() waiting for the reference to drop to zero. This will never happen, since we already hold a reference. Mark a split bio as already having entered the queue, so we can just use the live non-blocking queue enter variant. Thanks to Tetsuo Handa for the analysis. Reported-by: syzbot+c4f9cebf9d651f6e54de@syzkaller.appspotmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-06-01block: add a lower-level bio_add_page interfaceChristoph Hellwig
For the upcoming removal of buffer heads in XFS we need to keep track of the number of outstanding writeback requests per page. For this we need to know if bio_add_page merged a region with the previous bvec or not. Instead of adding additional arguments this refactors bio_add_page to be implemented using three lower level helpers which users like XFS can use directly if they care about the merge decisions. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jens Axboe <axboe@kernel.dk> Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-06-01block: split the blk-mq case from elevator_initChristoph Hellwig
There is almost no shared logic, which leads to a very confusing code flow. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Tested-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-06-01block: move sysfs_lock into elevator_initChristoph Hellwig
Both callers take just around so function call, so move it in. Also remove the now pointless blk_mq_sched_init wrapper. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Tested-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-06-01block: remove the always unused name argument to elevator_initChristoph Hellwig
Reported-by: Damien Le Moal <Damien.LeMoal@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Tested-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-06-01block: unexport elevator_init/exitChristoph Hellwig
These are only used by the block core. Also move the declarations to block/blk.h. Reported-by: Damien Le Moal <Damien.LeMoal@wdc.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Tested-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-06-01block: move initialization of elevator-related fields to blk_alloc_queue_nodeChristoph Hellwig
No point in doing this in elevator_init. Signed-off-by: Christoph Hellwig <hch@lst.de> Reported-by: Damien Le Moal <Damien.LeMoal@wdc.com> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Tested-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-31block, bfq: prevent soft_rt_next_start from being stuck at infinityDavide Sapienza
BFQ can deem a bfq_queue as soft real-time only if the queue - periodically becomes completely idle, i.e., empty and with no still-outstanding I/O request; - after becoming idle, gets new I/O only after a special reference time soft_rt_next_start. In this respect, after commit "block, bfq: consider also past I/O in soft real-time detection", the value of soft_rt_next_start can never decrease. This causes a problem with the following special updating case for soft_rt_next_start: to prevent queues that are not completely idle to be wrongly detected as soft real-time (when they become non-empty again), soft_rt_next_start is temporarily set to infinity for empty queues with still outstanding I/O requests. But, if such an update is actually performed, then, because of the above commit, soft_rt_next_start will be stuck at infinity forever, and the queue will have no more chance to be considered soft real-time. On slow systems, this problem does cause actual soft real-time applications to be occasionally not detected as such. This commit addresses this issue by eliminating the pushing of soft_rt_next_start to infinity, and by changing the way non-empty queues are prevented from being wrongly detected as soft real-time. Simply, a queue that becomes non-empty again can now be detected as soft real-time only if it has no outstanding I/O request. Signed-off-by: Davide Sapienza <sapienza.dav@gmail.com> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-31block, bfq: increase weight-raising duration for interactive appsDavide Sapienza
The maximum possible duration of the weight-raising period for interactive applications is limited to 13 seconds, as this is the time needed to load the largest application that we considered when tuning weight raising. Unfortunately, in such an evaluation, we did not consider the case of very slow virtual machines. For example, on a QEMU/KVM virtual machine - running in a slow PC; - with a virtual disk stacked on a slow low-end 5400rpm HDD; - serving a heavy I/O workload, such as the sequential reading of several files; mplayer takes 23 seconds to start, if constantly weight-raised. To address this issue, this commit conservatively sets the upper limit for weight-raising duration to 25 seconds. Signed-off-by: Davide Sapienza <sapienza.dav@gmail.com> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>