summaryrefslogtreecommitdiff
path: root/drivers/acpi/bus.c
AgeCommit message (Collapse)Author
2018-02-12device property: Constify device_get_match_data()Andy Shevchenko
Constify device_get_match_data() as OF and ACPI variants return constant value. Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-02-12ACPI / bus: Rename acpi_get_match_data() to acpi_device_get_match_data()Andy Shevchenko
Do the renaming to be consistent with its sibling, i.e. of_device_get_match_data(). No functional change. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-02-12ACPI / bus: Remove checks in acpi_get_match_data()Andy Shevchenko
As well as its sibling of_device_get_match_data() has no such checks, no need to do it in acpi_get_match_data(). First of all, we are not supposed to call fwnode API like this without driver attached. Second, since __acpi_match_device() does check input parameter there is no need to duplicate it outside. And last but not least one, the API should still serve the cases when ACPI device is enumerated via PRP0001. In such case driver has neither ACPI table nor driver data there. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-02-12ACPI / bus: Do not traverse through non-existed device tableAndy Shevchenko
When __acpi_match_device() is called it would be possible to have ACPI ID table a NULL pointer. To avoid potential dereference, check for this before traverse. While here, remove redundant 'else'. Note, this patch implies a bit of refactoring acpi_of_match_device() to return pointer to OF ID when matched followed by refactoring __acpi_match_device() to return either ACPI or OF ID when matches. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-02-09Merge tag 'acpi-part2-4.16-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more ACPI updates from Rafael Wysocki: "These are mostly fixes and cleanups, a few new quirks, a couple of updates related to the handling of ACPI tables and ACPICA copyrights refreshment. Specifics: - Update the ACPICA kernel code to upstream revision 20180105 including: * Assorted fixes (Jung-uk Kim) * Support for X32 ABI compilation (Anuj Mittal) * Update of ACPICA copyrights to 2018 (Bob Moore) - Prepare for future modifications to avoid executing the _STA control method too early (Hans de Goede) - Make the processor performance control library code ignore _PPC notifications if they cannot be handled and fix up the C1 idle state definition when it is used as a fallback state (Chen Yu, Yazen Ghannam) - Make it possible to use the SPCR table on x86 and to replace the original IORT table with a new one from initrd (Prarit Bhargava, Shunyong Yang) - Add battery-related quirks for Asus UX360UA and UX410UAK and add quirks for table parsing on Dell XPS 9570 and Precision M5530 (Kai Heng Feng) - Address static checker warnings in the CPPC code (Gustavo Silva) - Avoid printing a raw pointer to the kernel log in the smart battery driver (Greg Kroah-Hartman)" * tag 'acpi-part2-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: sbshc: remove raw pointer from printk() message ACPI: SPCR: Make SPCR available to x86 ACPI / CPPC: Use 64-bit arithmetic instead of 32-bit ACPI / tables: Add IORT to injectable table list ACPI / bus: Parse tables as term_list for Dell XPS 9570 and Precision M5530 ACPICA: Update version to 20180105 ACPICA: All acpica: Update copyrights to 2018 ACPI / processor: Set default C1 idle state description ACPI / battery: Add quirk for Asus UX360UA and UX410UAK ACPI: processor_perflib: Do not send _PPC change notification if not ready ACPI / scan: Use acpi_bus_get_status() to initialize ACPI_TYPE_DEVICE devs ACPI / bus: Do not call _STA on battery devices with unmet dependencies PCI: acpiphp_ibm: prepare for acpi_get_object_info() no longer returning status ACPI: export acpi_bus_get_status_handle() ACPICA: Add a missing pair of parentheses ACPICA: Prefer ACPI_TO_POINTER() over ACPI_ADD_PTR() ACPICA: Avoid NULL pointer arithmetic ACPICA: Linux: add support for X32 ABI compilation ACPI / video: Use true for boolean value
2018-02-06ACPI / bus: Parse tables as term_list for Dell XPS 9570 and Precision M5530Kai Heng Feng
The i2c touchpad on Dell XPS 9570 and Precision M5530 doesn't work out of box. The touchpad relies on its _INI method to update its _HID value from XXXX0000 to SYNA2393. Also, the _STA relies on value of I2CN to report correct status. Set acpi_gbl_parse_table_as_term_list so the value of I2CN can be correctly set up, and _INI can get run. The ACPI table in this machine is designed to get parsed this way. Also, change the quirk table to a more generic name. Link: https://bugzilla.kernel.org/show_bug.cgi?id=198515 Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-02-04ACPI / bus: Do not call _STA on battery devices with unmet dependenciesHans de Goede
The battery code uses acpi_device->dep_unmet to check for unmet deps and if there are unmet deps it does not bind to the device to avoid errors about missing OpRegions when calling ACPI methods on the device. The missing OpRegions when there are unmet deps problem also applies to the _STA method of some battery devices and calling it too early results in errors like these: [ 0.123579] ACPI Error: No handler for Region [ECRM] (00000000ba9edc4c) [GenericSerialBus] (20170831/evregion-166) [ 0.123601] ACPI Error: Region GenericSerialBus (ID=9) has no handler (20170831/exfldio-299) [ 0.123618] ACPI Error: Method parse/execution failed \_SB.I2C1.BAT1._STA, AE_NOT_EXIST (20170831/psparse-550) This commit fixes these errors happening when acpi_get_bus_status gets called by checking dep_unmet for battery devices and reporting a status of 0 until all dependencies are met. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-02-04ACPI: export acpi_bus_get_status_handle()Hans de Goede
Some modular drivers need this, export it. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-12-13ACPI / bus: Introduce acpi_get_match_data() functionSinan Kaya
OF has of_device_get_match_data() function to extract driver specific data structure. Add a similar function for ACPI. Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-09-14dmi: Mark all struct dmi_system_id instances constChristoph Hellwig
... and __initconst if applicable. Based on similar work for an older kernel in the Grsecurity patch. [JD: fix toshiba-wmi build] [JD: add htcpen] [JD: move __initconst where checkscript wants it] Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jean Delvare <jdelvare@suse.de>
2017-07-20ACPICA: Tables: Change table duplication check to be related to ↵Lv Zheng
acpi_gbl_verify_table_checksum ACPICA commit 3d837b5d4b1033942b4d91c7d3801a09c3157918 acpi_gbl_verify_table_checksum is used to avoid validating (mapping) an entire table in OS boot stage. 2nd "Reload" check in acpi_tb_install_standard_table() is prepared for the same purpose. So this patch combines them together using a renamed acpi_gbl_enable_table_validation flag. Lv Zheng. Link: https://github.com/acpica/acpica/commit/3d837b5d Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-10Merge branches 'acpi-spcr', 'acpi-osi', 'acpi-bus', 'acpi-scan' and 'acpi-misc'Rafael J. Wysocki
* acpi-spcr: ACPI: SPCR: Workaround for APM X-Gene 8250 UART 32-alignment errata ACPI: SPCR: Use access width to determine mmio usage * acpi-osi: ACPI / osi: Make local function acpi_osi_dmi_linux() static * acpi-bus: ACPI / bus: handle ACPI hotplug schedule errors completely * acpi-scan: ACPI / scan: Indicate to platform when hot remove returns busy * acpi-misc: ACPI / DPTF: constify attribute_group structures ACPI / LPSS: constify attribute_group structures ACPI: BGRT: constify attribute_group structures ACPI / power: constify attribute_group structures
2017-07-04ACPI / bus: handle ACPI hotplug schedule errors completelyLee, Chun-Yi
Kernel should decrements the reference count of ACPI device when the scheduling of ACPI hotplug work failed, and evaluates _OST to notify BIOS the failure. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: "Lee, Chun-Yi" <jlee@suse.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-07ACPI: Switch to use generic guid_t in acpi_evaluate_dsm()Andy Shevchenko
acpi_evaluate_dsm() and friends take a pointer to a raw buffer of 16 bytes. Instead we convert them to use guid_t type. At the same time we convert current users. acpi_str_to_uuid() becomes useless after the conversion and it's safe to get rid of it. Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Borislav Petkov <bp@suse.de> Acked-by: Dan Williams <dan.j.williams@intel.com> Cc: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Cc: Ben Skeggs <bskeggs@redhat.com> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Joerg Roedel <jroedel@suse.de> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Yisen Zhuang <yisen.zhuang@huawei.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-06-05ACPI / bus: Switch to use new generic UUID APIAndy Shevchenko
There are new types and helpers that are supposed to be used in new code. As a preparation to get rid of legacy types and API functions do the conversion here. Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-04-27ACPI / bus: Introduce a list of ids for "always present" devicesHans de Goede
Several Bay / Cherry Trail devices (all of which ship with Windows 10) hide the LPSS PWM controller in ACPI, typically the _STA method looks like this: Method (_STA, 0, NotSerialized) // _STA: Status { If (OSID == One) { Return (Zero) } Return (0x0F) } Where OSID is some dark magic seen in all Cherry Trail ACPI tables making the machine behave differently depending on which OS it *thinks* it is booting, this gets set in a number of ways which we cannot control, on some newer machines it simple hardcoded to "One" aka win10. This causes the PWM controller to get hidden, which means Linux cannot control the backlight level on cht based tablets / laptops. Since loading the driver for this does no harm (the only in kernel user of it is the i915 driver, which will only uses it when it needs it), this commit makes acpi_bus_get_status() always set status to ACPI_STA_DEFAULT for the LPSS PWM device, fixing the lack of backlight control. Signed-off-by: Hans de Goede <hdegoede@redhat.com> [ rjw: Rename the new file to utils.c ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-03-11Revert "x86/acpi: Set persistent cpuid <-> nodeid mapping when booting"Dou Liyang
Revert: dc6db24d2476 ("x86/acpi: Set persistent cpuid <-> nodeid mapping when booting") The mapping of "cpuid <-> nodeid" is established at boot time via ACPI tables to keep associations of workqueues and other node related items consistent across cpu hotplug. But, ACPI tables are unreliable and failures with that boot time mapping have been reported on machines where the ACPI table and the physical information which is retrieved at actual hotplug is inconsistent. Revert the mapping implementation so it can be replaced with a less error prone approach. Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com> Tested-by: Xiaolong Ye <xiaolong.ye@intel.com> Cc: rjw@rjwysocki.net Cc: linux-acpi@vger.kernel.org Cc: guzheng1@huawei.com Cc: izumi.taku@jp.fujitsu.com Cc: lenb@kernel.org Link: http://lkml.kernel.org/r/1488528147-2279-2-git-send-email-douly.fnst@cn.fujitsu.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-02-07ACPI / bus: Introduce acpi_of_modalias() equiv of of_modalias_node()Dan O'Donovan
When using devicetree stuff like i2c_client.name or spi_device.modalias is initialized to the first DT compatible id with the vendor prefix stripped. Since some drivers rely on this try to replicate it when using ACPI with DT ids. Signed-off-by: Dan O'Donovan <dan@emutex.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-12-22Merge branches 'acpica' and 'acpi-scan'Rafael J. Wysocki
* acpica: ACPI / osl: Remove deprecated acpi_get_table_with_size()/early_acpi_os_unmap_memory() ACPI / osl: Remove acpi_get_table_with_size()/early_acpi_os_unmap_memory() users ACPICA: Tables: Allow FADT to be customized with virtual address ACPICA: Tables: Back port acpi_get_table_with_size() and early_acpi_os_unmap_memory() from Linux kernel * acpi-scan: ACPI: do not warn if _BQC does not exist
2016-12-21ACPI / osl: Remove deprecated ↵Lv Zheng
acpi_get_table_with_size()/early_acpi_os_unmap_memory() Since all users are cleaned up, remove the 2 deprecated APIs due to no users. As a Linux variable rather than an ACPICA variable, acpi_gbl_permanent_mmap is renamed to acpi_permanent_mmap to have a consistent coding style across entire Linux ACPI subsystem. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-30sched/x86: Change CONFIG_SCHED_ITMT to CONFIG_SCHED_MC_PRIOTim Chen
Rename CONFIG_SCHED_ITMT for Intel Turbo Boost Max Technology 3.0 to CONFIG_SCHED_MC_PRIO. This makes the configuration extensible in future to other architectures that wish to similarly establish CPU core priorities support in the scheduler. The description in Kconfig is updated to reflect this change with added details for better clarity. The configuration is explicitly default-y, to enable the feature on CPUs that have this feature. It has no effect on non-TBM3 CPUs. Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: bp@suse.de Cc: jolsa@redhat.com Cc: linux-acpi@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: rjw@rjwysocki.net Link: http://lkml.kernel.org/r/2b2ee29d93e3f162922d72d0165a1405864fbb23.1480444902.git.tim.c.chen@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-11-24acpi/bus: Set _OSC for diverse core supportSrinivas Pandruvada
Set the OSC_SB_CPC_DIVERSE_HIGH_SUPPORT (bit 12) to enable diverse core support. This is required to enable the BIOS support of the Intel Turbo Boost Max Technology 3.0 feature. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Cc: linux-pm@vger.kernel.org Cc: peterz@infradead.org Cc: jolsa@redhat.com Cc: rjw@rjwysocki.net Cc: linux-acpi@vger.kernel.org Cc: bp@suse.de Link: http://lkml.kernel.org/r/a023623a727e86040a1715797055f6402caefd7e.1479844244.git.tim.c.chen@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-11-24acpi/bus: Enable HWP CPPC objectsSrinivas Pandruvada
Need to set platform wide _OSC bits to enable CPPC and CPPC version 2. If platform supports CPPC, then BIOS exposes CPPC tables. The primary reason to enable CPPC support is to get the maximum performance of each CPU to check and enable Intel Turbo Boost Max Technology 3.0 (ITMT). Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Cc: linux-pm@vger.kernel.org Cc: peterz@infradead.org Cc: jolsa@redhat.com Cc: rjw@rjwysocki.net Cc: linux-acpi@vger.kernel.org Cc: bp@suse.de Link: http://lkml.kernel.org/r/a696f6b17843cee9a542482fae6abab087be9587.1479844244.git.tim.c.chen@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-10-03Merge branch 'irq-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "The irq departement proudly presents: - A rework of the core infrastructure to optimally spread interrupt for multiqueue devices. The first version was a bit naive and failed to take thread siblings and other details into account. Developed in cooperation with Christoph and Keith. - Proper delegation of softirqs to ksoftirqd, so if ksoftirqd is active then no further softirq processsing on interrupt return happens. Otherwise we try to delegate and still run another batch of network packets in the irq return path, which then tries to delegate to ksoftirqd ..... - A proper machine parseable sysfs based alternative for /proc/interrupts. - ACPI support for the GICV3-ITS and ARM interrupt remapping - Two new irq chips from the ARM SoC zoo: STM32-EXTI and MVEBU-PIC - A new irq chip for the JCore (SuperH) - The usual pile of small fixlets in core and irqchip drivers" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (42 commits) softirq: Let ksoftirqd do its job genirq: Make function __irq_do_set_handler() static ARM/dts: Add EXTI controller node to stm32f429 ARM/STM32: Select external interrupts controller drivers/irqchip: Add STM32 external interrupts support Documentation/dt-bindings: Document STM32 EXTI controller bindings irqchip/mips-gic: Use for_each_set_bit to iterate over local IRQs pci/msi: Retrieve affinity for a vector genirq/affinity: Remove old irq spread infrastructure genirq/msi: Switch to new irq spreading infrastructure genirq/affinity: Provide smarter irq spreading infrastructure genirq/msi: Add cpumask allocation to alloc_msi_entry genirq: Expose interrupt information through sysfs irqchip/gicv3-its: Use MADT ITS subtable to do PCI/MSI domain initialization irqchip/gicv3-its: Factor out PCI-MSI part that might be reused for ACPI irqchip/gicv3-its: Probe ITS in the ACPI way irqchip/gicv3-its: Refactor ITS DT init code to prepare for ACPI irqchip/gicv3-its: Cleanup for ITS domain initialization PCI/MSI: Setup MSI domain on a per-device basis using IORT ACPI table ACPI: Add new IORT functions to support MSI domain handling ...
2016-10-03Merge branch 'x86-apic-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 apic updates from Ingo Molnar: "The main changes are: - Persistent CPU/node numbering across CPU hotplug/unplug events. This is a pretty involved series of changes that first fetches all the information during bootup and then uses it for the various hotplug/unplug methods. (Gu Zheng, Dou Liyang) - IO-APIC hot-add/remove fixes and enhancements. (Rui Wang) - ... various fixes, cleanups and enhancements" * 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits) x86/apic: Fix silent & fatal merge conflict in __generic_processor_info() acpi: Fix broken error check in map_processor() acpi: Validate processor id when mapping the processor acpi: Provide mechanism to validate processors in the ACPI tables x86/acpi: Set persistent cpuid <-> nodeid mapping when booting x86/acpi: Enable MADT APIs to return disabled apicids x86/acpi: Introduce persistent storage for cpuid <-> apicid mapping x86/acpi: Enable acpi to register all possible cpus at boot time x86/numa: Online memory-less nodes at boot time x86/apic: Get rid of apic_version[] array x86/apic: Order irq_enter/exit() calls correctly vs. ack_APIC_irq() x86/ioapic: Ignore root bridges without a companion ACPI device x86/apic: Update comment about disabling processor focus x86/smpboot: Check APIC ID before setting up default routing x86/ioapic: Fix IOAPIC failing to request resource x86/ioapic: Fix lost IOAPIC resource after hot-removal and hotadd x86/ioapic: Fix setup_res() failing to get resource x86/ioapic: Support hot-removal of IOAPICs present during boot x86/ioapic: Change prototype of acpi_ioapic_add() x86/apic, ACPI: Fix incorrect assignment when handling apic/x2apic entries ...
2016-09-26ACPI / bus: Adjust ACPI subsystem initialization for new table loading modeLv Zheng
This patch enables the following initialization order for the new table loading mode (which is enabled by setting acpi_gbl_parse_table_as_term_list to TRUE): 1. Install default region handlers (SystemMemory, SystemIo, PciConfig, EmbeddedControl via ECDT) without evaluating _REG; 2. Load the table and execute the module level AML opcodes instantly. Signed-off-by: Lv Zheng <lv.zheng@intel.com> [ rjw: Subject ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-21x86/acpi: Set persistent cpuid <-> nodeid mapping when bootingGu Zheng
The whole patch-set aims at making cpuid <-> nodeid mapping persistent. So that, when node online/offline happens, cache based on cpuid <-> nodeid mapping such as wq_numa_possible_cpumask will not cause any problem. It contains 4 steps: 1. Enable apic registeration flow to handle both enabled and disabled cpus. 2. Introduce a new array storing all possible cpuid <-> apicid mapping. 3. Enable _MAT and MADT relative apis to return non-present or disabled cpus' apicid. 4. Establish all possible cpuid <-> nodeid mapping. This patch finishes step 4. This patch set the persistent cpuid <-> nodeid mapping for all enabled/disabled processors at boot time via an additional acpi namespace walk for processors. [ tglx: Remove the unneeded exports ] Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com> Signed-off-by: Dou Liyang <douly.fnst@cn.fujitsu.com> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: mika.j.penttila@gmail.com Cc: len.brown@intel.com Cc: rafael@kernel.org Cc: rjw@rjwysocki.net Cc: yasu.isimatu@gmail.com Cc: linux-mm@kvack.org Cc: linux-acpi@vger.kernel.org Cc: isimatu.yasuaki@jp.fujitsu.com Cc: gongzhaogang@inspur.com Cc: tj@kernel.org Cc: izumi.taku@jp.fujitsu.com Cc: cl@linux.com Cc: chen.tang@easystack.cn Cc: akpm@linux-foundation.org Cc: kamezawa.hiroyu@jp.fujitsu.com Cc: lenb@kernel.org Link: http://lkml.kernel.org/r/1472114120-3281-6-git-send-email-douly.fnst@cn.fujitsu.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-12ACPI: I/O Remapping Table (IORT) initial supportTomasz Nowicki
IORT shows representation of IO topology for ARM based systems. It describes how various components are connected together on parent-child basis e.g. PCI RC -> SMMU -> ITS. Also see IORT spec. http://infocenter.arm.com/help/topic/com.arm.doc.den0049b/DEN0049B_IO_Remapping_Table.pdf Initial support allows to detect IORT table presence and save its root pointer obtained through acpi_get_table(). The pointer validity depends on acpi_gbl_permanent_mmap because if acpi_gbl_permanent_mmap is not set while using IORT nodes we would dereference unmapped pointers. For the aforementioned reason call acpi_iort_init() from acpi_init() which guarantees acpi_gbl_permanent_mmap to be set at that point. Add generic helpers which are helpful for scanning and retrieving information from IORT table content. List of the most important helpers: - iort_find_dev_node() finds IORT node for a given device - iort_node_map_rid() maps device RID and returns IORT node which provides final translation IORT support is placed under drivers/acpi/arm64/ new directory due to its ARM64 specific nature. The code there is considered only for ARM64. The long term plan is to keep all ARM64 specific tables support in this place e.g. GTDT table. Signed-off-by: Tomasz Nowicki <tn@semihalf.com> Acked-by: Rafael J. Wysocki <rjw@rjwysocki.net> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-07-25Merge branches 'acpi-processor', 'acpi-cppc', 'acpi-apei' and 'acpi-sleep'Rafael J. Wysocki
* acpi-processor: ACPI: enable ACPI_PROCESSOR_IDLE on ARM64 arm64: add support for ACPI Low Power Idle(LPI) drivers: firmware: psci: initialise idle states using ACPI LPI cpuidle: introduce CPU_PM_CPU_IDLE_ENTER macro for ARM{32, 64} arm64: cpuidle: drop __init section marker to arm_cpuidle_init ACPI / processor_idle: Add support for Low Power Idle(LPI) states ACPI / processor_idle: introduce ACPI_PROCESSOR_CSTATE * acpi-cppc: mailbox: pcc: Add PCC request and free channel declarations ACPI / CPPC: Prevent cpc_desc_ptr points to the invalid data ACPI: CPPC: Return error if _CPC is invalid on a CPU * acpi-apei: ACPI / APEI: Add Boot Error Record Table (BERT) support ACPI / einj: Make error paths more talkative ACPI / einj: Convert EINJ_PFX to proper pr_fmt * acpi-sleep: ACPI: Execute _PTS before system reboot
2016-07-25Merge branches 'acpi-bus', 'acpi-pci', 'acpica' and 'acpi-doc'Rafael J. Wysocki
* acpi-bus: ACPI / bus: Support for platform initiated graceful shutdown ACPI / bus: Correct the comments about acpi_subsystem_init() ACPI / bus: Use acpi_handle_debug() in acpi_print_osc_error() * acpi-pci: ACPI / PCI: make pci_slot explicitly non-modular ACPI / PCI: pci_slot: Use generic pr_debug utility ACPI / PCI: pci_slot: Use more common logging style * acpica: ACPICA: Linux: Enable ACPI_MUTEX_DEBUG for Linux kernel * acpi-doc: ACPI / debugger: Add AML debugger documentation ACPI: Add documentation describing ACPICA release automation
2016-07-21ACPI / processor_idle: Add support for Low Power Idle(LPI) statesSudeep Holla
ACPI 6.0 introduced an optional object _LPI that provides an alternate method to describe Low Power Idle states. It defines the local power states for each node in a hierarchical processor topology. The OSPM can use _LPI object to select a local power state for each level of processor hierarchy in the system. They used to produce a composite power state request that is presented to the platform by the OSPM. Since multiple processors affect the idle state for any non-leaf hierarchy node, coordination of idle state requests between the processors is required. ACPI supports two different coordination schemes: Platform coordinated and OS initiated. This patch adds initial support for Platform coordination scheme of LPI. Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-07-08ACPI: add support for ACPI reconfiguration notifiersOctavian Purdila
Add support for ACPI reconfiguration notifiers to allow subsystems to react to changes in the ACPI tables that happen after the initial enumeration. This is similar with the way dynamic device tree notifications work. The reconfigure notifications supported for now are device add and device remove. Since ACPICA allows only one table notification handler, this patch makes the table notifier function generic and moves it out of the sysfs specific code. Signed-off-by: Octavian Purdila <octavian.purdila@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-07-06ACPI / bus: Support for platform initiated graceful shutdownPrakash, Prashanth
This patch adds support for platform initited graceful shutdown as described in sections 5.6.6(Table-143) and 6.3.5.1 of ACPI 6.1 spec The OSPM will get a graceful shutdown request via a Notify operator on \_SB device with a value of 0x81 per section 5.6.6. Following the shutdown request from platform the OSPM needs to follow the processing sequence as described in section 6.2.5.1. v3 * Switched to regular work with delays from delayed work * Dropped changes to actypes.h * Small style changes v2 * Switched from standalone driver to a simple notify handler v1 * Initial Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Signed-off-by: Prashanth Prakash <pprakash@codeaurora.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-07-06ACPI / bus: Correct the comments about acpi_subsystem_init()Baoquan He
In acpi_subsystem_init(), function acpi_enable_subsystem() is called to do the real job. However with different flags passed to acpi_enable_subsystem(), different code is executed. In acpi_subsystem_init(), with "~ACPI_NO_ACPI_ENABLE" passed in, it will only switch over the platform to the ACPI mode. The remaining part of acpi_enable_subsystem() is done when acpi_bus_init() is called. So the comments above acpi_subsystem_init() is not exact, change it here. Signed-off-by: Baoquan He <bhe@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-06-23ACPI / bus: Use acpi_handle_debug() in acpi_print_osc_error()Rafael J. Wysocki
acpi_print_osc_error() basically duplicates the functionalit of acpi_handle_debug(), so use that one in there. While at it, convert the explicit KERN_DEBUG prints to pr_debug() (and apply it to continuation messages too). Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-06-07ACPI / EC: Fix a boot EC regresion by restoring boot EC support for the DSDT ECLv Zheng
According to the Windows probing result, during the table loading, the EC device described in the ECDT should be used. And the ECDT EC is also effective during the period the namespace objects are initialized (we can see a separate process executing _STA/_INI on Windows before executing other device specific control methods, for example, EC._REG). During the device enumration, the EC device described in the DSDT should be used. But there are differences between Linux and Windows around the device probing order. Thus in Linux, we should enable the DSDT EC as early as possible before enumerating devices in order not to trigger issues related to the device enumeration order differences. This patch thus converts acpi_boot_ec_enable() into acpi_ec_dsdt_probe() to fix the gap. This also fixes a user reported regression triggered after we switched the "table loading"/"ECDT support" to be ACPI spec 2.0 compliant. Fixes: 59f0aa9480cf (ACPI 2.0 / ECDT: Remove early namespace reference from EC) Link: https://bugzilla.kernel.org/show_bug.cgi?id=119261 Reported-and-tested-by: Gabriele Mazzotta <gabriele.mzt@gmail.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-09ACPI 2.0 / ECDT: Enable correct ECDT initialization orderLv Zheng
With wrong ECDT fixes reverted, it is possible to put ECDT probing before acpi_enable_subsystem(). But the ultimate purpose of ECDT re-enabling is to put the ECDT probing before the namespace initialization (acpi_load_tables()). This patch achieves this with protections so that we can enable it later when all necessary corrections are upstreamed. Link 4: https://bugzilla.kernel.org/show_bug.cgi?id=112911 Signed-off-by: Lv Zheng <lv.zheng@intel.com> Tested-by: Chris Bainbridge <chris.bainbridge@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-02Merge branch 'acpi-processor'Rafael J. Wysocki
* acpi-processor: ACPI / processor: Request native thermal interrupt handling via _OSC
2016-03-26ACPI / processor: Request native thermal interrupt handling via _OSCSrinivas Pandruvada
There are several reports of freeze on enabling HWP (Hardware PStates) feature on Skylake-based systems by the Intel P-states driver. The root cause is identified as the HWP interrupts causing BIOS code to freeze. HWP interrupts use the thermal LVT which can be handled by Linux natively, but on the affected Skylake-based systems SMM will respond to it by default. This is a problem for several reasons: - On the affected systems the SMM thermal LVT handler is broken (it will crash when invoked) and a BIOS update is necessary to fix it. - With thermal interrupt handled in SMM we lose all of the reporting features of the arch/x86/kernel/cpu/mcheck/therm_throt driver. - Some thermal drivers like x86-package-temp depend on the thermal threshold interrupts signaled via the thermal LVT. - The HWP interrupts are useful for debugging and tuning performance (if the kernel can handle them). The native handling of thermal interrupts needs to be enabled because of that. This requires some way to tell SMM that the OS can handle thermal interrupts. That can be done by using _OSC/_PDC in processor scope very early during ACPI initialization. The meaning of _OSC/_PDC bit 12 in processor scope is whether or not the OS supports native handling of interrupts for Collaborative Processor Performance Control (CPPC) notifications. Since on HWP-capable systems CPPC is a firmware interface to HWP, setting this bit effectively tells the firmware that the OS will handle thermal interrupts natively going forward. For details on _OSC/_PDC refer to: http://www.intel.com/content/www/us/en/standards/processor-vendor-specific-acpi-specification.html To implement the _OSC/_PDC handshake as described, introduce a new function, acpi_early_processor_osc(), that walks the ACPI namespace looking for ACPI processor objects and invokes _OSC for them with bit 12 in the capabilities buffer set and terminates the namespace walk on the first success. Also modify intel_thermal_interrupt() to clear HWP status bits in the HWP_STATUS MSR to acknowledge HWP interrupts (which prevents them from firing continuously). Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> [ rjw: Subject & changelog, function rename ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-02-16ACPI: introduce a function to find the first physical deviceAleksey Makarov
Factor out the code that finds the first physical device of a given ACPI device. It is used in several places. Signed-off-by: Aleksey Makarov <aleksey.makarov@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-01-12Merge branches 'acpi-scan', 'acpi-bus', 'acpi-osl' and 'acpi-pm'Rafael J. Wysocki
* acpi-scan: ACPI: Fix white space in a structure definition ACPI / utils: Add acpi_dev_present() ACPI / scan: Fix acpi_bus_id_list bookkeeping ACPI / scan: set status to 0 if _STA failed * acpi-bus: ACPI / bus: Show _OSC UUID when _OSC fails ACPI / bus: Tidy up _OSC error spacing * acpi-osl: ACPI / OSL: Add kerneldoc comments to memory mapping functions * acpi-pm: ACPI / PM: Support D3 COLD device in old BIOS for ZPODD
2015-12-22ACPI / bus: Show _OSC UUID when _OSC failsAndy Lutomirski
When _OSC fails and especially when it fails due to an invalid UUID, it's helpful to show the UUID that we tried. Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-12-22ACPI / bus: Tidy up _OSC error spacingAndy Lutomirski
The whitespace in _OSC error reports is weird. Improve it. Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-12-15ACPI / debugger: Add module support for ACPI debuggerLv Zheng
This patch converts AML debugger into a loadable module. Note that, it implements driver unloading at the level dependent on the module reference count. Which means if ACPI debugger is being used by a userspace program, "rmmod acpi_dbg" should result in failure. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-12-15ACPI / debugger: Add IO interface to access debugger functionalitiesLv Zheng
This patch adds /sys/kernel/debug/acpi/acpidbg, which can be used by userspace programs to access ACPICA debugger functionalities. Known issue: 1. IO flush support acpi_os_notify_command_complete() and acpi_os_wait_command_ready() can be used by acpi_dbg module to implement .flush() filesystem operation. While this patch doesn't go that far. It then becomes userspace tool's duty now to flush old commands before executing new batch mode commands. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-09-15ACPI: Eliminate CONFIG_.*{, _MODULE} #ifdef in favor of IS_ENABLED()Sudeep Holla
This commit removes all CONFIG_.*{,_MODULE} in ACPI code, replacing it with IS_ENABLED(). Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-09-01Merge branch 'acpi-pm'Rafael J. Wysocki
* acpi-pm: ACPI / bus: Move duplicate code to a separate new function mfd: Add support for Intel Sunrisepoint LPSS devices dmaengine: add a driver for Intel integrated DMA 64-bit mfd: make mfd_remove_devices() iterate in reverse order driver core: implement device_for_each_child_reverse() klist: implement klist_prev() Driver core: wakeup the parent device before trying probe ACPI / PM: Attach ACPI power domain only once PM / QoS: Make it possible to expose device latency tolerance to userspace ACPI / PM: Update the copyright notice and description of power.c
2015-09-01Merge branches 'acpi-scan', 'acpi-processor' and 'acpi-assorted'Rafael J. Wysocki
* acpi-scan: ACPI / bus: Move ACPI bus type registration ACPI / scan: Move bus operations and notification routines to bus.c ACPI / scan: Move device matching code to bus.c ACPI / scan: Move sysfs-related device code to a separate file * acpi-processor: PCC: Disable compilation by default ACPI: Decouple ACPI idle and ACPI processor drivers ACPI: Split out ACPI PSS from ACPI Processor driver PCC: Initialize PCC Mailbox earlier at boot ACPI / processor: remove leftover __refdata annotations * acpi-assorted: ACPI: fix acpi_debugfs_init prototype ACPI: Remove FSF mailing addresses
2015-08-06ACPI / bus: Move duplicate code to a separate new functionRafael J. Wysocki
After merging commit 712e960f0ee9 (ACPI / PM: Attach ACPI power domain only once) with commit 1dcc3d3362b0 (ACPI / bus: Move ACPI bus type registration) there is some duplicate code in acpi_device_is_first_physical_node() and acpi_companion_match() that can be moved to a separate routine and called from both places. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org>
2015-07-29Merge branch 'acpi-scan' into acpi-pmRafael J. Wysocki
Conflicts: drivers/acpi/scan.c The conflict is resolved by moving the just introduced acpi_device_is_first_physical_node() to bus.c and using the existing acpi_companion_match() from there. There will be an additional commit to combine the two.