summaryrefslogtreecommitdiff
path: root/drivers/acpi
AgeCommit message (Collapse)Author
2021-05-07Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull more arm64 updates from Catalin Marinas: "A mix of fixes and clean-ups that turned up too late for the first pull request: - Restore terminal stack frame records. Their previous removal caused traces which cross secondary_start_kernel to terminate one entry too late, with a spurious "0" entry. - Fix boot warning with pseudo-NMI due to the way we manipulate the PMR register. - ACPI fixes: avoid corruption of interrupt mappings on watchdog probe failure (GTDT), prevent unregistering of GIC SGIs. - Force SPARSEMEM_VMEMMAP as the only memory model, it saves with having to test all the other combinations. - Documentation fixes and updates: tagged address ABI exceptions on brk/mmap/mremap(), event stream frequency, update booting requirements on the configuration of traps" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: kernel: Update the stale comment arm64: Fix the documented event stream frequency arm64: entry: always set GIC_PRIO_PSR_I_SET during entry arm64: Explicitly document boot requirements for SVE arm64: Explicitly require that FPSIMD instructions do not trap arm64: Relax booting requirements for configuration of traps arm64: cpufeatures: use min and max arm64: stacktrace: restore terminal records arm64/vdso: Discard .note.gnu.property sections in vDSO arm64: doc: Add brk/mmap/mremap() to the Tagged Address ABI Exceptions psci: Remove unneeded semicolon ACPI: irq: Prevent unregistering of GIC SGIs ACPI: GTDT: Don't corrupt interrupt mappings on watchdow probe failure arm64: Show three registers per line arm64: remove HAVE_DEBUG_BUGVERBOSE arm64: alternative: simplify passing alt_region arm64: Force SPARSEMEM_VMEMMAP as the only memory management model arm64: vdso32: drop -no-integrated-as flag
2021-05-06Merge tag 'acpi-5.13-rc1-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fixes from Rafael Wysocki: "These revert one recent commit that turned out to be problematic, address two issues in the ACPI "custom method" interface and update GPIO properties documentation. Specifics: - Revent recent commit related to the handling of ACPI power resources during initialization, because it turned out to cause problems to occur on some systems (Rafael Wysocki). - Fix potential use-after-free and potential memory leak in the ACPI "custom method" debugfs interface (Mark Langsdorf). - Update ACPI GPIO properties documentation to cover assumptions regarding GPIO polarity (Andy Shevchenko)" * tag 'acpi-5.13-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: Revert "ACPI: scan: Turn off unused power resources during initialization" ACPI: custom_method: fix a possible memory leak ACPI: custom_method: fix potential use-after-free issue Documentation: firmware-guide: gpio-properties: Add note to SPI CS case
2021-05-06Merge branches 'acpi-pm' and 'acpi-docs'Rafael J. Wysocki
* acpi-pm: Revert "ACPI: scan: Turn off unused power resources during initialization" * acpi-docs: Documentation: firmware-guide: gpio-properties: Add note to SPI CS case
2021-05-05Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge more updates from Andrew Morton: "The remainder of the main mm/ queue. 143 patches. Subsystems affected by this patch series (all mm): pagecache, hugetlb, userfaultfd, vmscan, compaction, migration, cma, ksm, vmstat, mmap, kconfig, util, memory-hotplug, zswap, zsmalloc, highmem, cleanups, and kfence" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (143 commits) kfence: use power-efficient work queue to run delayed work kfence: maximize allocation wait timeout duration kfence: await for allocation using wait_event kfence: zero guard page after out-of-bounds access mm/process_vm_access.c: remove duplicate include mm/mempool: minor coding style tweaks mm/highmem.c: fix coding style issue btrfs: use memzero_page() instead of open coded kmap pattern iov_iter: lift memzero_page() to highmem.h mm/zsmalloc: use BUG_ON instead of if condition followed by BUG. mm/zswap.c: switch from strlcpy to strscpy arm64/Kconfig: introduce ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE x86/Kconfig: introduce ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE mm,memory_hotplug: add kernel boot option to enable memmap_on_memory acpi,memhotplug: enable MHP_MEMMAP_ON_MEMORY when supported mm,memory_hotplug: allocate memmap from the added memory range mm,memory_hotplug: factor out adjusting present pages into adjust_present_page_count() mm,memory_hotplug: relax fully spanned sections check drivers/base/memory: introduce memory_block_{online,offline} mm/memory_hotplug: remove broken locking of zone PCP structures during hot remove ...
2021-05-05Merge tag 'pci-v5.13-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull pci updates from Bjorn Helgaas: "Enumeration: - Release OF node when pci_scan_device() fails (Dmitry Baryshkov) - Add pci_disable_parity() (Bjorn Helgaas) - Disable Mellanox Tavor parity reporting (Heiner Kallweit) - Disable N2100 r8169 parity reporting (Heiner Kallweit) - Fix RCiEP device to RCEC association (Qiuxu Zhuo) - Convert sysfs "config", "rom", "reset", "label", "index", "acpi_index" to static attributes to help fix races in device enumeration (Krzysztof Wilczyński) - Convert sysfs "vpd" to static attribute (Heiner Kallweit, Krzysztof Wilczyński) - Use sysfs_emit() in "show" functions (Krzysztof Wilczyński) - Remove unused alloc_pci_root_info() return value (Krzysztof Wilczyński) PCI device hotplug: - Fix acpiphp reference count leak (Feilong Lin) Power management: - Fix acpi_pci_set_power_state() debug message (Rafael J. Wysocki) - Fix runtime PM imbalance (Dinghao Liu) Virtualization: - Increase delay after FLR to work around Intel DC P4510 NVMe erratum (Raphael Norwitz) MSI: - Convert rcar, tegra, xilinx to MSI domains (Marc Zyngier) - For rcar, xilinx, use controller address as MSI doorbell (Marc Zyngier) - Remove unused hv msi_controller struct (Marc Zyngier) - Remove unused PCI core msi_controller support (Marc Zyngier) - Remove struct msi_controller altogether (Marc Zyngier) - Remove unused default_teardown_msi_irqs() (Marc Zyngier) - Let host bridges declare their reliance on MSI domains (Marc Zyngier) - Make pci_host_common_probe() declare its reliance on MSI domains (Marc Zyngier) - Advertise mediatek lack of built-in MSI handling (Thomas Gleixner) - Document ways of ending up with NO_MSI (Marc Zyngier) - Refactor HT advertising of NO_MSI flag (Marc Zyngier) VPD: - Remove obsolete Broadcom NIC VPD length-limiting quirk (Heiner Kallweit) - Remove sysfs VPD size checking dead code (Heiner Kallweit) - Convert VPF sysfs file to static attribute (Heiner Kallweit) - Remove unnecessary pci_set_vpd_size() (Heiner Kallweit) - Tone down "missing VPD" message (Heiner Kallweit) Endpoint framework: - Fix NULL pointer dereference when epc_features not implemented (Shradha Todi) - Add missing destroy_workqueue() in endpoint test (Yang Yingliang) Amazon Annapurna Labs PCIe controller driver: - Fix compile testing without CONFIG_PCI_ECAM (Arnd Bergmann) - Fix "no symbols" warnings when compile testing with CONFIG_TRIM_UNUSED_KSYMS (Arnd Bergmann) APM X-Gene PCIe controller driver: - Fix cfg resource mapping regression (Dejin Zheng) Broadcom iProc PCIe controller driver: - Return zero for success of iproc_msi_irq_domain_alloc() (Pali Rohár) Broadcom STB PCIe controller driver: - Add reset_control_rearm() stub for !CONFIG_RESET_CONTROLLER (Jim Quinlan) - Fix use of BCM7216 reset controller (Jim Quinlan) - Use reset/rearm for Broadcom STB pulse reset instead of deassert/assert (Jim Quinlan) - Fix brcm_pcie_probe() error return for unsupported revision (Wei Yongjun) Cavium ThunderX PCIe controller driver: - Fix compile testing (Arnd Bergmann) - Fix "no symbols" warnings when compile testing with CONFIG_TRIM_UNUSED_KSYMS (Arnd Bergmann) Freescale Layerscape PCIe controller driver: - Fix ls_pcie_ep_probe() syntax error (comma for semicolon) (Krzysztof Wilczyński) - Remove layerscape-gen4 dependencies on OF and ARM64, add dependency on ARCH_LAYERSCAPE (Geert Uytterhoeven) HiSilicon HIP PCIe controller driver: - Remove obsolete HiSilicon PCIe DT description (Dongdong Liu) Intel Gateway PCIe controller driver: - Remove unused pcie_app_rd() (Jiapeng Chong) Intel VMD host bridge driver: - Program IRTE with Requester ID of VMD endpoint, not child device (Jon Derrick) - Disable VMD MSI-X remapping when possible so children can use more MSI-X vectors (Jon Derrick) MediaTek PCIe controller driver: - Configure FC and FTS for functions other than 0 (Ryder Lee) - Add YAML schema for MediaTek (Jianjun Wang) - Export pci_pio_to_address() for module use (Jianjun Wang) - Add MediaTek MT8192 PCIe controller driver (Jianjun Wang) - Add MediaTek MT8192 INTx support (Jianjun Wang) - Add MediaTek MT8192 MSI support (Jianjun Wang) - Add MediaTek MT8192 system power management support (Jianjun Wang) - Add missing MODULE_DEVICE_TABLE (Qiheng Lin) Microchip PolarFlare PCIe controller driver: - Make several symbols static (Wei Yongjun) NVIDIA Tegra PCIe controller driver: - Add MCFG quirks for Tegra194 ECAM errata (Vidya Sagar) - Make several symbols const (Rikard Falkeborn) - Fix Kconfig host/endpoint typo (Wesley Sheng) SiFive FU740 PCIe controller driver: - Add pcie_aux clock to prci driver (Greentime Hu) - Use reset-simple in prci driver for PCIe (Greentime Hu) - Add SiFive FU740 PCIe host controller driver and DT binding (Paul Walmsley, Greentime Hu) Synopsys DesignWare PCIe controller driver: - Move MSI Receiver init to dw_pcie_host_init() so it is re-initialized along with the RC in resume (Jisheng Zhang) - Move iATU detection earlier to fix regression (Hou Zhiqiang) TI J721E PCIe driver: - Add DT binding and TI j721e support for refclk to PCIe connector (Kishon Vijay Abraham I) - Add host mode and endpoint mode DT bindings for TI AM64 SoC (Kishon Vijay Abraham I) TI Keystone PCIe controller driver: - Use generic config accessors for TI AM65x (K3) to fix regression (Kishon Vijay Abraham I) Xilinx NWL PCIe controller driver: - Add support for coherent PCIe DMA traffic using CCI (Bharat Kumar Gogada) - Add optional "dma-coherent" DT property (Bharat Kumar Gogada) Miscellaneous: - Fix kernel-doc warnings (Krzysztof Wilczyński) - Remove unused MicroGate SyncLink device IDs (Jiri Slaby) - Remove redundant dev_err() for devm_ioremap_resource() failure (Chen Hui) - Remove redundant initialization (Colin Ian King) - Drop redundant dev_err() for platform_get_irq() errors (Krzysztof Wilczyński)" * tag 'pci-v5.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (98 commits) riscv: dts: Add PCIe support for the SiFive FU740-C000 SoC PCI: fu740: Add SiFive FU740 PCIe host controller driver dt-bindings: PCI: Add SiFive FU740 PCIe host controller MAINTAINERS: Add maintainers for SiFive FU740 PCIe driver clk: sifive: Use reset-simple in prci driver for PCIe driver clk: sifive: Add pcie_aux clock in prci driver for PCIe driver PCI: brcmstb: Use reset/rearm instead of deassert/assert ata: ahci_brcm: Fix use of BCM7216 reset controller reset: add missing empty function reset_control_rearm() PCI: Allow VPD access for QLogic ISP2722 PCI/VPD: Add helper pci_get_func0_dev() PCI/VPD: Remove pci_vpd_find_tag() SRDT handling PCI/VPD: Remove pci_vpd_find_tag() 'offset' argument PCI/VPD: Change pci_vpd_init() return type to void PCI/VPD: Make missing VPD message less alarming PCI/VPD: Remove pci_set_vpd_size() x86/PCI: Remove unused alloc_pci_root_info() return value MAINTAINERS: Add Jianjun Wang as MediaTek PCI co-maintainer PCI: mediatek-gen3: Add system PM support PCI: mediatek-gen3: Add MSI support ...
2021-05-05acpi,memhotplug: enable MHP_MEMMAP_ON_MEMORY when supportedOscar Salvador
Let the caller check whether it can pass MHP_MEMMAP_ON_MEMORY by checking mhp_supports_memmap_on_memory(). MHP_MEMMAP_ON_MEMORY can only be set in case ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE is enabled, the architecture supports altmap, and the range to be added spans a single memory block. Link: https://lkml.kernel.org/r/20210421102701.25051-6-osalvador@suse.de Signed-off-by: Oscar Salvador <osalvador@suse.de> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-01Merge tag 'iommu-updates-v5.13' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu updates from Joerg Roedel: - Big cleanup of almost unsused parts of the IOMMU API by Christoph Hellwig. This mostly affects the Freescale PAMU driver. - New IOMMU driver for Unisoc SOCs - ARM SMMU Updates from Will: - Drop vestigial PREFETCH_ADDR support (SMMUv3) - Elide TLB sync logic for empty gather (SMMUv3) - Fix "Service Failure Mode" handling (SMMUv3) - New Qualcomm compatible string (SMMUv2) - Removal of the AMD IOMMU performance counter writeable check on AMD. It caused long boot delays on some machines and is only needed to work around an errata on some older (possibly pre-production) chips. If someone is still hit by this hardware issue anyway the performance counters will just return 0. - Support for targeted invalidations in the AMD IOMMU driver. Before that the driver only invalidated a single 4k page or the whole IO/TLB for an address space. This has been extended now and is mostly useful for emulated AMD IOMMUs. - Several fixes for the Shared Virtual Memory support in the Intel VT-d driver - Mediatek drivers can now be built as modules - Re-introduction of the forcedac boot option which got lost when converting the Intel VT-d driver to the common dma-iommu implementation. - Extension of the IOMMU device registration interface and support iommu_ops to be const again when drivers are built as modules. * tag 'iommu-updates-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (84 commits) iommu: Streamline registration interface iommu: Statically set module owner iommu/mediatek-v1: Add error handle for mtk_iommu_probe iommu/mediatek-v1: Avoid build fail when build as module iommu/mediatek: Always enable the clk on resume iommu/fsl-pamu: Fix uninitialized variable warning iommu/vt-d: Force to flush iotlb before creating superpage iommu/amd: Put newline after closing bracket in warning iommu/vt-d: Fix an error handling path in 'intel_prepare_irq_remapping()' iommu/vt-d: Fix build error of pasid_enable_wpe() with !X86 iommu/amd: Remove performance counter pre-initialization test Revert "iommu/amd: Fix performance counter initialization" iommu/amd: Remove duplicate check of devid iommu/exynos: Remove unneeded local variable initialization iommu/amd: Page-specific invalidations for more than one page iommu/arm-smmu-v3: Remove the unused fields for PREFETCH_CONFIG command iommu/vt-d: Avoid unnecessary cache flush in pasid entry teardown iommu/vt-d: Invalidate PASID cache when root/context entry changed iommu/vt-d: Remove WO permissions on second-level paging entries iommu/vt-d: Report the right page fault address ...
2021-04-30Revert "ACPI: scan: Turn off unused power resources during initialization"Rafael J. Wysocki
Revert commit 4b9ee772eaa8 ("ACPI: scan: Turn off unused power resources during initialization") that is reported to cause initialization issues to occur. Reported-by: Shujun Wang <wsj20369@163.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-04-28ACPI: custom_method: fix a possible memory leakMark Langsdorf
In cm_write(), if the 'buf' is allocated memory but not fully consumed, it is possible to reallocate the buffer without freeing it by passing '*ppos' as 0 on a subsequent call. Add an explicit kfree() before kzalloc() to prevent the possible memory leak. Fixes: 526b4af47f44 ("ACPI: Split out custom_method functionality into an own driver") Signed-off-by: Mark Langsdorf <mlangsdo@redhat.com> Cc: 5.4+ <stable@vger.kernel.org> # 5.4+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-04-28ACPI: custom_method: fix potential use-after-free issueMark Langsdorf
In cm_write(), buf is always freed when reaching the end of the function. If the requested count is less than table.length, the allocated buffer will be freed but subsequent calls to cm_write() will still try to access it. Remove the unconditional kfree(buf) at the end of the function and set the buf to NULL in the -EINVAL error path to match the rest of function. Fixes: 03d1571d9513 ("ACPI: custom_method: fix memory leaks") Signed-off-by: Mark Langsdorf <mlangsdo@redhat.com> Cc: 5.4+ <stable@vger.kernel.org> # 5.4+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-04-27Merge tag 'cfi-v5.13-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull CFI on arm64 support from Kees Cook: "This builds on last cycle's LTO work, and allows the arm64 kernels to be built with Clang's Control Flow Integrity feature. This feature has happily lived in Android kernels for almost 3 years[1], so I'm excited to have it ready for upstream. The wide diffstat is mainly due to the treewide fixing of mismatched list_sort prototypes. Other things in core kernel are to address various CFI corner cases. The largest code portion is the CFI runtime implementation itself (which will be shared by all architectures implementing support for CFI). The arm64 pieces are Acked by arm64 maintainers rather than coming through the arm64 tree since carrying this tree over there was going to be awkward. CFI support for x86 is still under development, but is pretty close. There are a handful of corner cases on x86 that need some improvements to Clang and objtool, but otherwise works well. Summary: - Clean up list_sort prototypes (Sami Tolvanen) - Introduce CONFIG_CFI_CLANG for arm64 (Sami Tolvanen)" * tag 'cfi-v5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: arm64: allow CONFIG_CFI_CLANG to be selected KVM: arm64: Disable CFI for nVHE arm64: ftrace: use function_nocfi for ftrace_call arm64: add __nocfi to __apply_alternatives arm64: add __nocfi to functions that jump to a physical address arm64: use function_nocfi with __pa_symbol arm64: implement function_nocfi psci: use function_nocfi for cpu_resume lkdtm: use function_nocfi treewide: Change list_sort to use const pointers bpf: disable CFI in dispatcher functions kallsyms: strip ThinLTO hashes from static functions kthread: use WARN_ON_FUNCTION_MISMATCH workqueue: use WARN_ON_FUNCTION_MISMATCH module: ensure __cfi_check alignment mm: add generic function_nocfi macro cfi: add __cficanonical add support for Clang CFI
2021-04-26Merge branch 'acpi-misc'Rafael J. Wysocki
* acpi-misc: ACPI: dock: fix some coding style issues ACPI: sysfs: fix some coding style issues ACPI: PM: add a missed blank line after declarations ACPI: custom_method: fix a coding style issue ACPI: CPPC: fix some coding style issues ACPI: button: fix some coding style issues ACPI: battery: fix some coding style issues ACPI: acpi_pad: add a missed blank line after declarations ACPI: LPSS: add a missed blank line after declarations ACPI: ipmi: remove useless return statement for void function ACPI: processor: fix some coding style issues ACPI: APD: fix a block comment align issue ACPI: AC: fix some coding style issues ACPI: fix various typos in comments
2021-04-26Merge branches 'acpi-cppc', 'acpi-video' and 'acpi-utils'Rafael J. Wysocki
* acpi-cppc: ACPI: CPPC: Replace cppc_attr with kobj_attribute ACPI: CPPC: Add emtpy stubs of functions for CONFIG_ACPI_CPPC_LIB unset * acpi-video: ACPI: video: use native backlight for GA401/GA502/GA503 ACPI: video: Check LCD flag on ACPI-reduced-hardware devices ACPI: utils: Add acpi_reduced_hardware() helper * acpi-utils: ACPI: utils: Capitalize abbreviations in the comments ACPI: utils: Document for_each_acpi_dev_match() macro
2021-04-26Merge branches 'acpi-scan', 'acpi-drivers', 'acpi-pm' and 'acpi-resources'Rafael J. Wysocki
* acpi-scan: ACPI: bus: Introduce acpi_dev_get() and reuse it in ACPI code ACPI: scan: Utilize match_string() API ACPI: scan: Call acpi_get_object_info() from acpi_set_pnp_ids() ACPI: scan: Drop sta argument from acpi_init_device_object() ACPI: scan: Drop sta argument from acpi_add_single_object() ACPI: scan: Rearrange checks in acpi_bus_check_add() ACPI: scan: Fold acpi_bus_type_and_status() into its caller * acpi-drivers: ACPI: HED: Drop unused ACPI_MODULE_NAME() definition * acpi-pm: ACPI: power: Turn off unused power resources unconditionally ACPI: scan: Turn off unused power resources during initialization * acpi-resources: resource: Prevent irqresource_disabled() from erasing flags
2021-04-26Merge branch 'acpi-messages'Rafael J. Wysocki
* acpi-messages: hwmon: acpi_power_meter: Get rid of ACPICA message printing IIO: acpi-als: Get rid of ACPICA message printing ACPI: utils: Introduce acpi_evaluation_failure_warn() ACPI: Drop unused ACPI_*_COMPONENT definitions and update documentation ACPI: sysfs: Get rid of ACPICA message printing
2021-04-26Merge branches 'acpi-pci' and 'acpi-processor'Rafael J. Wysocki
* acpi-pci: ACPI: PCI: Replace direct printk() invocations in pci_link.c ACPI: PCI: Drop ACPI_PCI_COMPONENT that is not used any more ACPI: PCI: Replace ACPI_DEBUG_PRINT() and ACPI_EXCEPTION() ACPI: PCI: IRQ: Consolidate printing diagnostic messages * acpi-processor: ACPI: processor: perflib: Eliminate redundant status check ACPI: processor: Get rid of ACPICA message printing ACPI: processor: idle: Drop extra prefix from pr_notice() ACPI: processor: Remove initialization of static variable
2021-04-26Merge branch 'acpica'Rafael J. Wysocki
* acpica: (22 commits) ACPICA: Update version to 20210331 ACPICA: IORT: Updates for revision E.b ACPICA: acpisrc: Add missing conversion for VIOT support ACPICA: iASL: Decode subtable type field for VIOT ACPICA: iASL: Add support for CEDT table ACPICA: ACPI 6.4: add support for PHAT table ACPICA: ACPI 6.4: add CSI2Bus resource template ACPICA: ACPI 6.4: PMTT: add new fields/structures ACPICA: CXL 2.0: CEDT: Add new CEDT table ACPICA: iASL: Add definitions for the VIOT table ACPICA: ACPI 6.4: add SDEV secure access components ACPICA: ACPI 6.4: Add new flags in SRAT ACPICA: ACPI 6.4: HMAT: add new fields/flags ACPICA: ACPI 6.4: NFIT: add Location Cookie field ACPICA: Tree-wide: fix various typos and spelling mistakes ACPICA: ACPI 6.4: PPTT: add new version of subtable type 1 ACPICA: ACPI 6.4: PCCT: add support for subtable type 5 ACPICA: ACPI 6.4: MADT: add Multiprocessor Wakeup Structure ACPICA: ACPI 6.4: add CXL ACPI device ID and _CBR object ACPICA: ACPI 6.4: add USB4 capabilities UUID ...
2021-04-23ACPI: irq: Prevent unregistering of GIC SGIsMarc Zyngier
When using ACPI on arm64, which implies the GIC IRQ model, no table should ever provide a GSI number in the range [0:15], as these are reserved for IPIs. However, drivers tend to call acpi_unregister_gsi() with any random GSI number provided by half baked tables, which results in an exploding kernel when its IPIs have been unconfigured. In order to catch this, check for the silly case early, warn that something is going wrong and avoid the above disaster. Signed-off-by: Marc Zyngier <maz@kernel.org> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Tested-by: dann frazier <dann.frazier@canonical.com> Tested-by: Hanjun Guo <guohanjun@huawei.com> Reviewed-by: Hanjun Guo <guohanjun@huawei.com> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Link: https://lore.kernel.org/r/20210421164317.1718831-3-maz@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2021-04-23ACPI: GTDT: Don't corrupt interrupt mappings on watchdow probe failureMarc Zyngier
When failing the driver probe because of invalid firmware properties, the GTDT driver unmaps the interrupt that it mapped earlier. However, it never checks whether the mapping of the interrupt actially succeeded. Even more, should the firmware report an illegal interrupt number that overlaps with the GIC SGI range, this can result in an IPI being unmapped, and subsequent fireworks (as reported by Dann Frazier). Rework the driver to have a slightly saner behaviour and actually check whether the interrupt has been mapped before unmapping things. Reported-by: dann frazier <dann.frazier@canonical.com> Fixes: ca9ae5ec4ef0 ("acpi/arm64: Add SBSA Generic Watchdog support in GTDT driver") Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/YH87dtTfwYgavusz@xps13.dannf Cc: <stable@vger.kernel.org> Cc: Fu Wei <wefu@redhat.com> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Tested-by: dann frazier <dann.frazier@canonical.com> Tested-by: Hanjun Guo <guohanjun@huawei.com> Reviewed-by: Hanjun Guo <guohanjun@huawei.com> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Link: https://lore.kernel.org/r/20210421164317.1718831-2-maz@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2021-04-21ACPI: video: use native backlight for GA401/GA502/GA503Luke D Jones
Force backlight control in these models to use the native interface at /sys/class/backlight/amdgpu_bl0. Signed-off-by: Luke D. Jones <luke@ljones.dev> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-04-21ACPI: APEI: remove redundant assignment to variable rcColin Ian King
The variable rc is being assigned a value that is never read, the assignment is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-04-16PCI: tegra: Add Tegra194 MCFG quirks for ECAM errataVidya Sagar
The PCIe controller in Tegra194 SoC is not ECAM-compliant. With the current hardware design, ECAM can be enabled only for one controller (the C5 controller) with bus numbers starting from 160 instead of 0. A different approach is taken to avoid this abnormal way of enabling ECAM for just one controller but to enable configuration space access for all the other controllers. In this approach, ops are added through MCFG quirk mechanism which access the configuration spaces by dynamically programming iATU (internal AddressTranslation Unit) to generate respective configuration accesses just like the way it is done in DesignWare core sub-system. This issue is specific to Tegra194 and it would be fixed in the future generations of Tegra SoCs. Link: https://lore.kernel.org/r/20210416134537.19474-1-vidyas@nvidia.com Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-04-16Merge branches 'iommu/fixes', 'arm/mediatek', 'arm/smmu', 'arm/exynos', ↵Joerg Roedel
'unisoc', 'x86/vt-d', 'x86/amd' and 'core' into next
2021-04-13ACPI: utils: Capitalize abbreviations in the commentsAndy Shevchenko
The DSDT and ACPI should be capitalized. Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-04-13ACPI: utils: Document for_each_acpi_dev_match() macroAndy Shevchenko
The macro requires to call acpi_dev_put() on each iteration. Due to this it doesn't tolerate sudden disappearence of the devices. Document all these nuances to prevent users blindly call it without understanding the possible issues. While at it, add the note to the acpi_dev_get_next_match_dev() and advertise acpi_dev_put() instead of put_device() in the whole family of the helper functions. Fixes: bf263f64e804 ("media: ACPI / bus: Add acpi_dev_get_next_match_dev() and helper macro") Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-04-13ACPI: bus: Introduce acpi_dev_get() and reuse it in ACPI codeAndy Shevchenko
Introduce acpi_dev_get() to have a symmetrical API with acpi_dev_put() and reuse both in ACPI code in drivers/acpi/. While at it, use acpi_bus_put_acpi_device() in one place instead of the above. Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-04-12ACPI: scan: Utilize match_string() APIAndy Shevchenko
We have already an API to match a string in the array of strings. Utilize it instead of open coded analogues. Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-04-08treewide: Change list_sort to use const pointersSami Tolvanen
list_sort() internally casts the comparison function passed to it to a different type with constant struct list_head pointers, and uses this pointer to call the functions, which trips indirect call Control-Flow Integrity (CFI) checking. Instead of removing the consts, this change defines the list_cmp_func_t type and changes the comparison function types of all list_sort() callers to use const pointers, thus avoiding type mismatches. Suggested-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Sami Tolvanen <samitolvanen@google.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Kees Cook <keescook@chromium.org> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Tested-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20210408182843.1754385-10-samitolvanen@google.com
2021-04-08ACPI: CPPC: Replace cppc_attr with kobj_attributeNathan Chancellor
All of the CPPC sysfs show functions are called via indirect call in kobj_attr_show(), where they should be of type ssize_t (*show)(struct kobject *kobj, struct kobj_attribute *attr, char *buf); because that is the type of the ->show() member in 'struct kobj_attribute' but they are actually of type ssize_t (*show)(struct kobject *kobj, struct attribute *attr, char *buf); because of the ->show() member in 'struct cppc_attr', resulting in a Control Flow Integrity violation [1]. $ cat /sys/devices/system/cpu/cpu0/acpi_cppc/highest_perf 3400 $ dmesg | grep "CFI failure" [ 175.970559] CFI failure (target: show_highest_perf+0x0/0x8): As far as I can tell, the only difference between 'struct cppc_attr' and 'struct kobj_attribute' aside from the type of the attr parameter is the type of the count parameter in the ->store() member (ssize_t vs. size_t), which does not actually matter because all of these nodes are read-only. Eliminate 'struct cppc_attr' in favor of 'struct kobj_attribute' to fix the violation. [1]: https://lore.kernel.org/r/20210401233216.2540591-1-samitolvanen@google.com/ Fixes: 158c998ea44b ("ACPI / CPPC: add sysfs support to compute delivered performance") Link: https://github.com/ClangBuiltLinux/linux/issues/1343 Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-04-08ACPI: scan: Call acpi_get_object_info() from acpi_set_pnp_ids()Rafael J. Wysocki
Notice that it is not necessary to call acpi_get_object_info() from acpi_add_single_object() in order to pass the pointer returned by it to acpi_init_device_object() and from there to acpi_set_pnp_ids(). It is more straightforward to call acpi_get_object_info() from acpi_set_pnp_ids() and avoid unnecessary pointer passing, so change the code accordingly. No intentional functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
2021-04-08ACPI: scan: Drop sta argument from acpi_init_device_object()Rafael J. Wysocki
Use the observation that the initial status check for ACPI_BUS_TYPE_PROCESSOR objects can be carried out in the same way as for ACPI_BUS_TYPE_DEVICE objects and it is not necessary to fail acpi_add_single_object() if acpi_bus_get_status_handle() returns an error for a processor (its status can be set to 0 instead) to simplify acpi_add_single_object(). Accordingly, drop the "sta" argument from acpi_init_device_object() as it can always set the initial status to ACPI_STA_DEFAULT and let its caller correct that later on. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
2021-04-08ACPI: scan: Drop sta argument from acpi_add_single_object()Rafael J. Wysocki
Move the initial status check for ACPI_BUS_TYPE_PROCESSOR objects into acpi_add_single_object() so it is not necessary to pass the "sta" argument to it, get rid of that argument from there and update the callers of that function accordingly. No intentional functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
2021-04-08ACPI: scan: Rearrange checks in acpi_bus_check_add()Rafael J. Wysocki
Rearrange the checks in acpi_bus_check_add() to avoid checking the "type" twice and take "check_dep" into account only for ACPI_TYPE_DEVICE objects. No intentional functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
2021-04-08ACPI: scan: Fold acpi_bus_type_and_status() into its callerRafael J. Wysocki
There is only one caller of acpi_bus_type_and_status() which is acpi_bus_check_add(), so fold the former into the latter and use the observation that the initial status of the device is ACPI_STA_DEFAULT in all cases except for ACPI_BUS_TYPE_PROCESSOR to simplify the code. No intentional functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com>
2021-04-08ACPI: video: Check LCD flag on ACPI-reduced-hardware devicesHans de Goede
Starting with Windows 8, Windows no longer uses the ACPI-video interface for backlight control by default. Instead backlight control is left up to the GPU drivers and these are typically directly accessing the GPU for this instead of going through ACPI. This means that the ACPI video interface is no longer being tested by many vendors, which leads to false-positive /sys/class/backlight entries on devices which don't have a backlight at all such as desktops or top-set boxes. These false-positives causes desktop environments to show a non functional brightness slider in various places. Checking the LCD flag greatly reduces the amount of false-positives, so commit 5928c281524f ("ACPI / video: Default lcd_only to true on Win8-ready and newer machines") enabled the checking of this flag by default on all win8 BIOS-es. But this let to regressions on some models, so the check was made stricter adding a DMI chassis-type check to only enable the LCD flag checking on desktop/server chassis. Unfortunately the chassis-type reported in the DMI strings is not always reliable. One class of devices where this is a problem is Intel Bay Trail-T based top-set boxes / mini PCs / HDMI sticks. These are based on reference designs which were targetets and the reference design BIOS code is often used without changing the chassis-type to something more appropriate. There are many, many Bay Trail-T based devices affected by this, so DMI quirking our way out of this is a bad idea. This patch takes a different approach, Bay Trail-T (unlike regular Bay Trail) is an ACPI-reduced-hw platform and ACPI-reduced-hw platforms generally don't have an embedded-controller and thus will use a native (GPU specific) backlight interface. This patch enables Checking the LCD flag by default on ACPI-reduced-hw platforms with a win8 BIOS independent of the reported chassis-type, fixing the false positive /sys/class/backlight entries on these devices. Note in hindsight I should have never added the DMI chassis-type check when the enabling of LCD flag checking on Windows 8 BIOS-es let to some regressions. Instead I should have added DMI quirks for the (presumably few) models where the LCD flag check let to issues. But I'm afraid that it is too late to change this now, changing this now will likely lead to a bunch of regressions. This patch was tested on a Mele PCG03 mini PC. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-04-08ACPI: utils: Add acpi_reduced_hardware() helperHans de Goede
Add a getter for the acpi_gbl_reduced_hardware variable so that modules can check if they are running on an ACPI reduced-hw platform or not. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-04-08ACPI: dock: fix some coding style issuesXiaofei Tan
Fix some coding style issues reported by checkpatch.pl, including following types: WARNING: Missing a blank line after declarations ERROR: spaces required around that ':' WARNING: Statements should start on a tabstop Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-04-08ACPI: sysfs: fix some coding style issuesXiaofei Tan
Fix some coding style issues reported by checkpatch.pl, including following types: WARNING: Missing a blank line after declarations WARNING: Block comments should align the * on each line ERROR: open brace '{' following function definitions go on the next line Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-04-08ACPI: PM: add a missed blank line after declarationsXiaofei Tan
Add a missed blank line after declarations, reported by checkpatch.pl. Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-04-08ACPI: custom_method: fix a coding style issueXiaofei Tan
Fix the following coding style issue reported by checkpatch.pl ERROR: "foo * bar" should be "foo *bar" FILE: drivers/acpi/custom_method.c:22: +static ssize_t cm_write(struct file *file, const char __user * user_buf, Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-04-08ACPI: CPPC: fix some coding style issuesXiaofei Tan
Fix some coding style issues reported by checkpatch.pl, including the following types: WARNING: Missing a blank line after declarations WARNING: unnecessary whitespace before a quoted newline ERROR: spaces required around that '>=' ERROR: switch and case should be at the same indent Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-04-08ACPI: button: fix some coding style issuesXiaofei Tan
Fix some coding style issues reported by checkpatch.pl, including the following types: WARNING: Block comments use * on subsequent lines WARNING: Block comments use a trailing */ on a separate line ERROR: code indent should use tabs where possible Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-04-08ACPI: battery: fix some coding style issuesXiaofei Tan
Fix some coding style issues reported by checkpatch.pl, including the following types: WARNING: Block comments use * on subsequent lines WARNING: Block comments use a trailing */ on a separate line ERROR: code indent should use tabs where possible WARNING: Missing a blank line after declarations ERROR: spaces required around that '?' (ctx:WxV) WARNING: Block comments should align the * on each line Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-04-08ACPI: acpi_pad: add a missed blank line after declarationsXiaofei Tan
Add a missed blank line after declarations, reported by checkpatch.pl. Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-04-08ACPI: LPSS: add a missed blank line after declarationsXiaofei Tan
Add a missed blank line after declarations, reported by checkpatch.pl. Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-04-08ACPI: ipmi: remove useless return statement for void functionXiaofei Tan
Remove useless return statement for void function, reported by checkpatch.pl. WARNING: void function return statements are not generally useful FILE: drivers/acpi/acpi_ipmi.c:482: + return; +} Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-04-08ACPI: processor: fix some coding style issuesXiaofei Tan
Fix some coding style issues reported by checkpatch.pl, including the following types: ERROR: code indent should use tabs where possible WARNING: Block comments use a trailing */ on a separate line WARNING: Missing a blank line after declarations WARNING: labels should not be indented Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-04-08ACPI: APD: fix a block comment align issueXiaofei Tan
Fix the following coding style issue reported by checkpatch.pl: WARNING: Block comments should align the * on each line +/** +* Create platform device during acpi scan attach handle. Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-04-08ACPI: AC: fix some coding style issuesXiaofei Tan
Fix some coding style issues reported by checkpatch.pl, including the following types: ERROR: "foo * bar" should be "foo *bar" ERROR: code indent should use tabs where possible WARNING: Block comments use a trailing */ on a separate line WARNING: braces {} are not necessary for single statement blocks WARNING: void function return statements are not generally useful WARNING: CVS style keyword markers, these will _not_ be updated Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-04-07ACPICA: ACPI 6.4: add CSI2Bus resource templateBob Moore
This commit the result of squashing the following: ACPICA commit 21a316fdaa46b3fb245a1920f3829cb05d6ced6e ACPICA commit f5506fc7dad08c2a25ef52cf836c2d67385a612c Link: https://github.com/acpica/acpica/commit/21a316fd Link: https://github.com/acpica/acpica/commit/f5506fc7 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>