summaryrefslogtreecommitdiff
path: root/drivers/clk
AgeCommit message (Collapse)Author
2015-01-17clk: fix possible null pointer dereferenceStanimir Varbanov
The commit 646cafc6 (clk: Change clk_ops->determine_rate to return a clk_hw as the best parent) opens a possibility for null pointer dereference, fix this. Signed-off-by: Stanimir Varbanov <svarbanov@mm-sol.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Michael Turquette <mturquette@linaro.org>
2015-01-17Revert "clk: ppc-corenet: Fix Section mismatch warning"Kevin Hao
This reverts commit da788acb28386aa896224e784954bb73c99ff26c. That commit tried to fix the section mismatch warning by moving the ppc_corenet_clk_driver struct to init section. This is definitely wrong because the kernel would free the memories occupied by this struct after boot while this driver is still registered in the driver core. The kernel would panic when accessing this driver struct. Cc: stable@vger.kernel.org # 3.17 Signed-off-by: Kevin Hao <haokexin@gmail.com> Acked-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Michael Turquette <mturquette@linaro.org>
2015-01-17clk: rockchip: fix deadlock possibility in cpuclkHeiko Stübner
Lockdep reported a possible deadlock between the cpuclk lock and for example the i2c driver. CPU0 CPU1 ---- ---- lock(clk_lock); local_irq_disable(); lock(&(&i2c->lock)->rlock); lock(clk_lock); <Interrupt> lock(&(&i2c->lock)->rlock); *** DEADLOCK *** The generic clock-types of the core ccf already use spin_lock_irqsave when touching clock registers, so do the same for the cpuclk. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Michael Turquette <mturquette@linaro.org> [mturquette@linaro.org: removed initialization of "flags"]
2015-01-13clk: berlin: bg2q: remove non-exist "smemc" gate clockJisheng Zhang
The "smemc" clock is removed on BG2Q SoCs. In fact, bit19 of clkenable register is for nfc. Current code use bit19 for non-exist "smemc" incorrectly, this prevents eMMC from working due to the sdhci's "core" clk is still gated. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Cc: stable@vger.kernel.org # 3.16+ Signed-off-by: Michael Turquette <mturquette@linaro.org>
2015-01-13clk: at91: keep slow clk enabled to prevent system hangBoris Brezillon
All slow clk users are not properly claiming it (get + prepare + enable) before using it. If all users properly claiming this clock release it, the clock is disabled, but faulty users still depends on it, and the system hangs. This fix prevents the slow clock from being disabled, and should solve the hanging issue, but offending drivers should be patched to properly claim this clock. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Reported-by: Bo Shen <voice.shen@atmel.com> Cc: stable@vger.kernel.org Signed-off-by: Michael Turquette <mturquette@linaro.org>
2014-12-28clk: rockchip: fix rk3288 cpuclk core dividersHeiko Stuebner
Commit 0e5bdb3f9fa5 (clk: rockchip: switch to using the new cpuclk type for armclk) didn't take into account that the divider used on rk3288 are of the (n+1) type. The rk3066 and rk3188 socs use more complex divider types making it necessary for the list-elements to be the real register-values to write. Therefore reduce divider values in the table accordingly so that they really are the values that should be written to the registers and match the dividers actually specified for the rk3288. Reported-by: Sonny Rao <sonnyrao@chromium.org> Fixes: 0e5bdb3f9fa5 ("clk: rockchip: switch to using the new cpuclk type for armclk") Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Doug Anderson <dianders@chromium.org> Cc: stable@vger.kernel.org
2014-12-28clk: rockchip: fix rk3066 pll lock bit locationHeiko Stuebner
The bit locations indicating the locking status of the plls on rk3066 are shifted by one to the right when compared to the rk3188, bits [7:4] instead of [8:5] on the rk3188, thus indicating the locking state of the wrong pll or a completely different information in case of the gpll. The recently introduced pll init code exposed that problem on some rk3066 boards when it tried to bring the boot-pll value in line with the value from the rate table. Fix this by defining separate pll definitions for rk3066 with the correct locking indices. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Fixes: 2c14736c75db ("clk: rockchip: add clock driver for rk3188 and rk3066 clocks") Tested-by: FUKAUMI Naoki <naobsd@gmail.com> Cc: stable@vger.kernel.org
2014-12-21clk: rockchip: Fix clock gate for rk3188 hclk_emem_periRomain Perier
Do not disable clock gate "hclk_emem_peri", otherwise EMAC clocks no longer work and it breaks ethernet on RK3066 and RK3188. It fixes a regression introduced by commit 78eaf6095cc7 ("clk: rockchip: disable unused clocks"). Signed-off-by: Romain Perier <romain.perier@gmail.com> Fixes: 78eaf6095cc7 ("clk: rockchip: disable unused clocks") Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-12-21clk: rockchip: add CLK_IGNORE_UNUSED flag to fix rk3066/rk3188 USB HostJulien CHAUVEAU
This patch adds CLK_IGNORE_UNUSED flag to hclk_usb_peri, hclk_usbotg0 and hclk_usbotg1 because these clocks must remain enabled to use the USB controllers in host mode. This fixes a regression introduced by commit 78eaf6095cc7 ("clk: rockchip: disable unused clocks"). Signed-off-by: Julien CHAUVEAU <julien.chauveau@neo-technologies.fr> Fixes: 78eaf6095cc7 ("clk: rockchip: disable unused clocks") Reviewed-by: Romain Perier <romain.perier@gmail.com> Tested-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-12-20Merge tag 'clk-for-linus-3.19' of ↵Linus Torvalds
git://git.linaro.org/people/mike.turquette/linux Pull clk framework updates from Mike Turquette: "This is much later than usual due to several last minute bugs that had to be addressed. As usual the majority of changes are new drivers and modifications to existing drivers. The core recieved many fixes along with the groundwork for several large changes coming in the future which will better parition clock providers from clock consumers" * tag 'clk-for-linus-3.19' of git://git.linaro.org/people/mike.turquette/linux: (86 commits) clk: samsung: Fix Exynos 5420 pinctrl setup and clock disable failure due to domain being gated ARM: OMAP3: clock: fix boot breakage in legacy mode ARM: OMAP2+: clock: fix DPLL code to use new determine rate APIs clk: Really fix deadlock with mmap_sem clk: mmp: fix sparse non static symbol warning clk: Change clk_ops->determine_rate to return a clk_hw as the best parent clk: change clk_debugfs_add_file to take a struct clk_hw clk: Don't expose __clk_get_accuracy clk: Don't try to use a struct clk* after it could have been freed clk: Remove unused function __clk_get_prepare_count clk: samsung: Fix double add of syscore ops after driver rebind clk: samsung: exynos4: set parent of sclk_hdmiphy to hdmi clk: samsung: exynos4415: Fix build with PM_SLEEP disabled clk: samsung: remove unnecessary inclusion of header files from clk.h clk: samsung: remove unnecessary CONFIG_OF from clk.c clk: samsung: Spelling s/bwtween/between/ clk: rockchip: Add support for the mmc clock phases using the framework clk: rockchip: add bindings for the mmc clocks clk: rockchip: rk3288 export i2s0_clkout for use in DT clk: rockchip: use clock ID for DMC (memory controller) on rk3288 ...
2014-12-17clk: samsung: Fix Exynos 5420 pinctrl setup and clock disable failure due to ↵Krzysztof Kozlowski
domain being gated Audio subsystem clocks are located in separate block. On Exynos 5420 if clock for this block (from main clock domain) 'mau_epll' is gated then any read or write to audss registers will block. This kind of boot hang was observed on Arndale Octa and Peach Pi/Pit after introducing runtime PM to pl330 DMA driver. After that commit the 'mau_epll' was gated, because the "amba" clock was disabled and there were no more users of mau_epll. The system hang on one of steps: 1. Disabling unused clocks from audss block. 2. During audss GPIO setup (just before probing i2s0 because samsung_pinmux_setup() tried to access memory from audss block which was gated. Add a workaround for this by enabling the 'mau_epll' clock in probe. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Michael Turquette <mturquette@linaro.org>
2014-12-15Merge tag 'for-v3.19/omap-a' of ↵Michael Turquette
git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending into tmp Some OMAP clock/hwmod patches for v3.19. Most of the patches are clock-related. The DPLL implementation is changed to better align to the common clock framework. There is also a patch that removes a few lines from the hwmod code - this patch should have no functional effect. Basic build, boot, and PM test logs for these patches can be found here: http://www.pwsan.com/omap/testlogs/omap-a-for-v3.19/20141113094101/
2014-12-15clk: Really fix deadlock with mmap_semStephen Boyd
Commit 6314b6796e3c (clk: Don't hold prepare_lock across debugfs creation, 2014-09-04) forgot to update one place where we hold the prepare_lock while creating debugfs directories. This means we still have the chance of a deadlock that the commit was trying to fix. Actually fix it by moving the debugfs creation outside the prepare_lock. Cc: <stable@vger.kernel.org> # 3.18 Reported-by: Russell King <rmk+kernel@arm.linux.org.uk> Fixes: 6314b6796e3c "clk: Don't hold prepare_lock across debugfs creation" Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Michael Turquette <mturquette@linaro.org> [mturquette@linaro.org: removed lockdep_assert]
2014-12-14Merge tag 'driver-core-3.19-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core update from Greg KH: "Here's the set of driver core patches for 3.19-rc1. They are dominated by the removal of the .owner field in platform drivers. They touch a lot of files, but they are "simple" changes, just removing a line in a structure. Other than that, a few minor driver core and debugfs changes. There are some ath9k patches coming in through this tree that have been acked by the wireless maintainers as they relied on the debugfs changes. Everything has been in linux-next for a while" * tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits) Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries" fs: debugfs: add forward declaration for struct device type firmware class: Deletion of an unnecessary check before the function call "vunmap" firmware loader: fix hung task warning dump devcoredump: provide a one-way disable function device: Add dev_<level>_once variants ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries ath: use seq_file api for ath9k debugfs files debugfs: add helper function to create device related seq_file drivers/base: cacheinfo: remove noisy error boot message Revert "core: platform: add warning if driver has no owner" drivers: base: support cpu cache information interface to userspace via sysfs drivers: base: add cpu_device_create to support per-cpu devices topology: replace custom attribute macros with standard DEVICE_ATTR* cpumask: factor out show_cpumap into separate helper function driver core: Fix unbalanced device reference in drivers_probe driver core: fix race with userland in device_add() sysfs/kernfs: make read requests on pre-alloc files use the buffer. sysfs/kernfs: allow attributes to request write buffer be pre-allocated. fs: sysfs: return EGBIG on write if offset is larger than file size ...
2014-12-12Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree update from Jiri Kosina: "Usual stuff: documentation updates, printk() fixes, etc" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (24 commits) intel_ips: fix a type in error message cpufreq: cpufreq-dt: Move newline to end of error message ps3rom: fix error return code treewide: fix typo in printk and Kconfig ARM: dts: bcm63138: change "interupts" to "interrupts" Replace mentions of "list_struct" to "list_head" kernel: trace: fix printk message scsi: mpt2sas: fix ioctl in comment zbud, zswap: change module author email clocksource: Fix 'clcoksource' typo in comment arm: fix wording of "Crotex" in CONFIG_ARCH_EXYNOS3 help gpio: msm-v1: make boolean argument more obvious usb: Fix typo in usb-serial-simple.c PCI: Fix comment typo 'COMFIG_PM_OPS' powerpc: Fix comment typo 'CONIFG_8xx' powerpc: Fix comment typos 'CONFiG_ALTIVEC' clk: st: Spelling s/stucture/structure/ isci: Spelling s/stucture/structure/ usb: gadget: zero: Spelling s/infrastucture/infrastructure/ treewide: Fix company name in module descriptions ...
2014-12-11Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS updates from Ralf Baechle: "This is an unusually large pull request for MIPS - in parts because lots of patches missed the 3.18 deadline but primarily because some folks opened the flood gates. - Retire the MIPS-specific phys_t with the generic phys_addr_t. - Improvments for the backtrace code used by oprofile. - Better backtraces on SMP systems. - Cleanups for the Octeon platform code. - Cleanups and fixes for the Loongson platform code. - Cleanups and fixes to the firmware library. - Switch ATH79 platform to use the firmware library. - Grand overhault to the SEAD3 and Malta interrupt code. - Move the GIC interrupt code to drivers/irqchip - Lots of GIC cleanups and updates to the GIC code to use modern IRQ infrastructures and features of the kernel. - OF documentation updates for the GIC bindings - Move GIC clocksource driver to drivers/clocksource - Merge GIC clocksource driver with clockevent driver. - Further updates to bring the GIC clocksource driver up to date. - R3000 TLB code cleanups - Improvments to the Loongson 3 platform code. - Convert pr_warning to pr_warn. - Merge a bunch of small lantiq and ralink fixes that have been staged/lingering inside the openwrt tree for a while. - Update archhelp for IP22/IP32 - Fix a number of issues for Loongson 1B. - New clocksource and clockevent driver for Loongson 1B. - Further work on clk handling for Loongson 1B. - Platform work for Broadcom BMIPS. - Error handling cleanups for TurboChannel. - Fixes and optimization to the microMIPS support. - Option to disable the FTLB. - Dump more relevant information on machine check exception - Change binfmt to allow arch to examine PT_*PROC headers - Support for new style FPU register model in O32 - VDSO randomization. - BCM47xx cleanups - BCM47xx reimplement the way the kernel accesses NVRAM information. - Random cleanups - Add support for ATH25 platforms - Remove pointless locking code in some PCI platforms. - Some improvments to EVA support - Minor Alchemy cleanup" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (185 commits) MIPS: Add MFHC0 and MTHC0 instructions to uasm. MIPS: Cosmetic cleanups of page table headers. MIPS: Add CP0 macros for extended EntryLo registers MIPS: Remove now unused definition of phys_t. MIPS: Replace use of phys_t with phys_addr_t. MIPS: Replace MIPS-specific 64BIT_PHYS_ADDR with generic PHYS_ADDR_T_64BIT PCMCIA: Alchemy Don't select 64BIT_PHYS_ADDR in Kconfig. MIPS: lib: memset: Clean up some MIPS{EL,EB} ifdefery MIPS: iomap: Use __mem_{read,write}{b,w,l} for MMIO MIPS: <asm/types.h> fix indentation. MAINTAINERS: Add entry for BMIPS multiplatform kernel MIPS: Enable VDSO randomization MIPS: Remove a temporary hack for debugging cache flushes in SMTC configuration MIPS: Remove declaration of obsolete arch_init_clk_ops() MIPS: atomic.h: Reformat to fit in 79 columns MIPS: Apply `.insn' to fixup labels throughout MIPS: Fix microMIPS LL/SC immediate offsets MIPS: Kconfig: Only allow 32-bit microMIPS builds MIPS: signal.c: Fix an invalid cast in ISA mode bit handling MIPS: mm: Only build one microassembler that is suitable ...
2014-12-11Merge tag 'for-v3.19-exynos-clk-2' of git://linuxtv.org/snawrocki/samsung ↵Michael Turquette
into clk-next - exynos4415 and exynos audio subsystem clk driver (build with PM_SLEEP disabled, resource release) fixes - minor cleanups in drivers/clk/samsung/clk.c (spelling, includes) - modification of the exynos4 HDMI PHY clock definition to model dependency of "sclk_hdmiphy" on the "hdmi" clock
2014-12-11clk: mmp: fix sparse non static symbol warningWei Yongjun
Fixes the following sparse warnings: drivers/clk/mmp/clk-frac.c:113:6: warning: symbol 'clk_factor_init' was not declared. Should it be static? Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Michael Turquette <mturquette@linaro.org>
2014-12-09Merge tag 'drivers-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Arnd Bergmann: "These are changes for drivers that are intimately tied to some SoC and for some reason could not get merged through the respective subsystem maintainer tree. The largest single change here this time around is the Tegra iommu/memory controller driver, which gets updated to the new iommu DT binding. More drivers like this are likely to follow for the following merge window, but we should be able to do those through the iommu maintainer. Other notable changes are: - reset controller drivers from the reset maintainer (socfpga, sti, berlin) - fixes for the keystone navigator driver merged last time - at91 rtc driver changes related to the at91 cleanups - ARM perf driver changes from Will Deacon - updates for the brcmstb_gisb driver" * tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (53 commits) clocksource: arch_timer: Allow the device tree to specify uninitialized timer registers clocksource: arch_timer: Fix code to use physical timers when requested memory: Add NVIDIA Tegra memory controller support bus: brcmstb_gisb: Add register offset tables for older chips bus: brcmstb_gisb: Look up register offsets in a table bus: brcmstb_gisb: Introduce wrapper functions for MMIO accesses bus: brcmstb_gisb: Make the driver buildable on MIPS of: Add NVIDIA Tegra memory controller binding ARM: tegra: Move AHB Kconfig to drivers/amba amba: Add Kconfig file clk: tegra: Implement memory-controller clock serial: samsung: Fix serial config dependencies for exynos7 bus: brcmstb_gisb: resolve section mismatch ARM: common: edma: edma_pm_resume may be unused ARM: common: edma: add suspend resume hook powerpc/iommu: Rename iommu_[un]map_sg functions rtc: at91sam9: add DT bindings documentation rtc: at91sam9: use clk API instead of relying on AT91_SLOW_CLOCK ARM: at91: add clk_lookup entry for RTT devices rtc: at91sam9: rework the Kconfig description ...
2014-12-09Merge tag 'soc-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform changes from Arnd Bergmann: "New and updated SoC support, notable changes include: - bcm: brcmstb SMP support initial iproc/cygnus support - exynos: Exynos4415 SoC support PMU and suspend support for Exynos5420 PMU support for Exynos3250 pm related maintenance - imx: new LS1021A SoC support vybrid 610 global timer support - integrator: convert to using multiplatform configuration - mediatek: earlyprintk support for mt8127/mt8135 - meson: meson8 soc and l2 cache controller support - mvebu: Armada 38x CPU hotplug support drop support for prerelease Armada 375 Z1 stepping extended suspend support, now works on Armada 370/XP - omap: hwmod related maintenance prcm cleanup - pxa: initial pxa27x DT handling - rockchip: SMP support for rk3288 add cpu frequency scaling support - shmobile: r8a7740 power domain support various small restart, timer, pci apmu changes - sunxi: Allwinner A80 (sun9i) earlyprintk support - ux500: power domain support Overall, a significant chunk of changes, coming mostly from the usual suspects: omap, shmobile, samsung and mvebu, all of which already contain a lot of platform specific code in arch/arm" * tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (187 commits) ARM: mvebu: use the cpufreq-dt platform_data for independent clocks soc: integrator: Add terminating entry for integrator_cm_match ARM: mvebu: add SDRAM controller description for Armada XP ARM: mvebu: adjust mbus controller description on Armada 370/XP ARM: mvebu: add suspend/resume DT information for Armada XP GP ARM: mvebu: synchronize secondary CPU clocks on resume ARM: mvebu: make sure MMU is disabled in armada_370_xp_cpu_resume ARM: mvebu: Armada XP GP specific suspend/resume code ARM: mvebu: reserve the first 10 KB of each memory bank for suspend/resume ARM: mvebu: implement suspend/resume support for Armada XP clk: mvebu: add suspend/resume for gatable clocks bus: mvebu-mbus: provide a mechanism to save SDRAM window configuration bus: mvebu-mbus: suspend/resume support clocksource: time-armada-370-xp: add suspend/resume support irqchip: armada-370-xp: Add suspend/resume support ARM: add lolevel debug support for asm9260 ARM: add mach-asm9260 ARM: EXYNOS: use u8 for val[] in struct exynos_pmu_conf power: reset: imx-snvs-poweroff: add power off driver for i.mx6 ARM: imx: temporarily remove CONFIG_SOC_FSL from LS1021A ...
2014-12-09Merge tag 'cleanup-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanups from Arnd Bergmann: "The remaining cleanups for 3.19 are to a large part result of devicetree conversion nearing completion on two other platforms besides AT91: - Like AT91, Renesas shmobile is in the process to migrate to DT and multiplatform, but using a different approach of doing it one SoC at a time. For 3.19, the r8a7791 platform and associated "Koelsch" board are considered complete and we remove the non-DT non-multiplatform support for this. - The ARM Versatile Express has supported DT and multiplatform for a long time, but we have still kept the legacy board files around, because not all drivers were fully working before. We have finally taken the last step to remove the board files. Other changes in this branch are preparation for the later branches or just unrelated to the more interesting changes: - The dts files for arm64 get moved into per-vendor directories for a clearer structure. - Some dead code removal (zynq, exynos, davinci, imx) - Using pr_*() macros more consistently instead of printk(KERN_*) in some platform code" * tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (71 commits) ARM: zynq: Remove secondary_startup() declaration from header ARM: vexpress: Enable regulator framework when MMCI is in use ARM: vexpress: Remove non-DT code ARM: imx: Remove unneeded .map_io initialization ARM: dts: imx6qdl-sabresd: Fix the microphone route ARM: imx: refactor mxc_iomux_mode() ARM: imx: simplify clk_pllv3_prepare() ARM: imx6q: drop unnecessary semicolon ARM: imx: clean up machine mxc_arch_reset_init_dt reset init ARM: dts: imx6qdl-rex: Remove unneeded 'fsl,mode' property ARM: dts: imx6qdl-gw5x: Remove unneeded 'fsl,mode' property ARM: dts: imx6qdl-sabresd: Use IMX6QDL_CLK_CKO define ARM: at91: remove useless init_time for DT-only SoCs ARM: davinci: Remove redundant casts ARM: davinci: Use standard logging styles ARM: shmobile: r8a7779: Spelling/grammar s/entity/identity/, s/map/mapping/ ARM: shmobile: sh7372: Spelling/grammar s/entity map/identity mapping/ ARM: shmobile: sh73a0: Spelling/grammar s/entity map/identity mapping/ ARM: EXYNOS: Remove unused static iomapping ARM: at91: fix build breakage due to legacy board removals ...
2014-12-08Merge tag 'mfd-for-linus-3.19' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "Changes to the core: - Honour PLATFORM_DEVID_NONE and PLATFORM_DEVID_AUTO dev IDs Changes to existing drivers: - IRQ additions/fixes; axp20x, da9063-core - Code simplification; i2c-dln2 - Regmap additions/fixes; max77693 - Error checking/handling improvements; dln2, db8500-prcmu - Bug fixes; dln2, wm8350-core - DT support/documentation; max77693, max77686, tps65217, twl4030-power, gpio-tc3589x - Decouple syscon interface from platform devices - Use MFD hotplug registration; rtsx_usb, viperboard, hid-sensor-hub - Regulator fixups; sec-core - Power Management additions/fixes; rts5227, tc6393xb - Remove relic/redundant code; ab8500-sysctrl, lpc_sch, max77693-private - Clean-up/coding style changes; tps65090 - Clk additions/fixes; tc6393xb, tc6387xb, t7l66xb - Add USB-SPI support; dln2 - Trivial changes; max14577, arizona-spi, lpc_sch, wm8997-tables, wm5102-tables wm5110-tables, axp20x, atmel-hlcdc, rtsx_pci New drivers/supported devices: - axp288 PMIC support added to axp20x - s2mps13 support added to sec-core - New support for Diolan DLN-2 - New support for atmel-hlcdc" * tag 'mfd-for-linus-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (55 commits) mfd: rtsx: Add func to split u32 into register mfd: atmel-hlcdc: Add Kconfig option description and name mfd: da9063: Get irq base dynamically before registering device mfd: max14577: Fix obvious typo in company name in copyright mfd: axp20x: Constify axp20x_acpi_match and rid unused warning mfd: t7l66xb: prepare/unprepare clocks mfd: tc6387xb: prepare/unprepare clocks mfd: dln2: add support for USB-SPI module mfd: wm5110: Add missing registers for AIF2 channels 3-6 mfd: tc3589x: get rid of static base mfd: arizona: Document HP_CTRL_1L and HP_CTRL_1R registers mfd: wm8997: Mark INTERRUPT_STATUS_2_MASK as readable mfd: tc6393xb: Prepare/unprepare clocks mfd: tps65090: Fix bonkers indenting strategy mfd: tc6393xb: Fail ohci suspend if full state restore is required mfd: lpc_sch: Don't call mfd_remove_devices() mfd: wm8350-core: Fix probable mask then right shift defect mfd: ab8500-sysctrl: Drop ab8500_restart mfd: db8500-prcmu: Provide sane error path values mfd: db8500-prcmu: Check return of devm_ioremap for error ...
2014-12-04Merge tag 'mvebu-soc-suspend-3.19' of git://git.infradead.org/linux-mvebu ↵Arnd Bergmann
into next/soc Pull "mvebu SoC suspend changes for v3.19" from Jason Cooper: - Armada 370/XP suspend/resume support - mvebu SoC driver suspend/resume support - irqchip - clocksource - mbus - clk * tag 'mvebu-soc-suspend-3.19' of git://git.infradead.org/linux-mvebu: ARM: mvebu: add SDRAM controller description for Armada XP ARM: mvebu: adjust mbus controller description on Armada 370/XP ARM: mvebu: add suspend/resume DT information for Armada XP GP ARM: mvebu: synchronize secondary CPU clocks on resume ARM: mvebu: make sure MMU is disabled in armada_370_xp_cpu_resume ARM: mvebu: Armada XP GP specific suspend/resume code ARM: mvebu: reserve the first 10 KB of each memory bank for suspend/resume ARM: mvebu: implement suspend/resume support for Armada XP clk: mvebu: add suspend/resume for gatable clocks bus: mvebu-mbus: provide a mechanism to save SDRAM window configuration bus: mvebu-mbus: suspend/resume support clocksource: time-armada-370-xp: add suspend/resume support irqchip: armada-370-xp: Add suspend/resume support Documentation: dt-bindings: minimal documentation for MVEBU SDRAM controller Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-12-03clk: Change clk_ops->determine_rate to return a clk_hw as the best parentTomeu Vizoso
This is in preparation for clock providers to not have to deal with struct clk. Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Michael Turquette <mturquette@linaro.org>
2014-12-03clk: change clk_debugfs_add_file to take a struct clk_hwTomeu Vizoso
Instead of struct clk, as this should be only used by providers. Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Michael Turquette <mturquette@linaro.org>
2014-12-03clk: Don't expose __clk_get_accuracyTomeu Vizoso
As it's only used internally, in drivers/clk/clk.c. Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Michael Turquette <mturquette@linaro.org>
2014-12-03clk: Don't try to use a struct clk* after it could have been freedTomeu Vizoso
As __clk_release could call kfree on clk and then we wouldn't have a safe way of getting the module that owns the clock. Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Fixes: fcb0ee6a3d33 ("clk: Implement clk_unregister") Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Michael Turquette <mturquette@linaro.org>
2014-12-03clk: Remove unused function __clk_get_prepare_countTomeu Vizoso
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Michael Turquette <mturquette@linaro.org>
2014-12-02clk: samsung: Fix double add of syscore ops after driver rebindKrzysztof Kozlowski
During driver unbind the syscore ops were not unregistered which lead to double add on syscore list: $ echo "3810000.audss-clock-controller" > /sys/bus/platform/drivers/exynos-audss-clk/unbind $ echo "3810000.audss-clock-controller" > /sys/bus/platform/drivers/exynos-audss-clk/bind [ 1463.044061] ------------[ cut here ]------------ [ 1463.047255] WARNING: CPU: 0 PID: 1 at lib/list_debug.c:36 __list_add+0x8c/0xc0() [ 1463.054613] list_add double add: new=c06e52c0, prev=c06e52c0, next=c06d5f84. [ 1463.061625] Modules linked in: [ 1463.064623] CPU: 0 PID: 1 Comm: bash Tainted: G W 3.18.0-rc5-next-20141121-00005-ga8fab06eab42-dirty #1022 [ 1463.075338] [<c0014e2c>] (unwind_backtrace) from [<c0011d80>] (show_stack+0x10/0x14) [ 1463.083046] [<c0011d80>] (show_stack) from [<c048bb70>] (dump_stack+0x70/0xbc) [ 1463.090236] [<c048bb70>] (dump_stack) from [<c00233d4>] (warn_slowpath_common+0x74/0xb0) [ 1463.098295] [<c00233d4>] (warn_slowpath_common) from [<c00234a4>] (warn_slowpath_fmt+0x30/0x40) [ 1463.106962] [<c00234a4>] (warn_slowpath_fmt) from [<c020fe80>] (__list_add+0x8c/0xc0) [ 1463.114760] [<c020fe80>] (__list_add) from [<c0282094>] (register_syscore_ops+0x30/0x3c) [ 1463.122819] [<c0282094>] (register_syscore_ops) from [<c0392f20>] (exynos_audss_clk_probe+0x36c/0x460) [ 1463.132091] [<c0392f20>] (exynos_audss_clk_probe) from [<c0283084>] (platform_drv_probe+0x48/0xa4) [ 1463.141013] [<c0283084>] (platform_drv_probe) from [<c0281a14>] (driver_probe_device+0x13c/0x37c) [ 1463.149852] [<c0281a14>] (driver_probe_device) from [<c0280560>] (bind_store+0x90/0xe0) [ 1463.157822] [<c0280560>] (bind_store) from [<c027fd10>] (drv_attr_store+0x20/0x2c) [ 1463.165363] [<c027fd10>] (drv_attr_store) from [<c0143898>] (sysfs_kf_write+0x4c/0x50) [ 1463.173252] [<c0143898>] (sysfs_kf_write) from [<c0142c80>] (kernfs_fop_write+0xbc/0x198) [ 1463.181395] [<c0142c80>] (kernfs_fop_write) from [<c00e2be0>] (vfs_write+0xa0/0x1a8) [ 1463.189104] [<c00e2be0>] (vfs_write) from [<c00e2f00>] (SyS_write+0x40/0x8c) [ 1463.196122] [<c00e2f00>] (SyS_write) from [<c000f2a0>] (ret_fast_syscall+0x0/0x48) [ 1463.203655] ---[ end trace 08f6710c9bc8d8f3 ]--- [ 1463.208244] exynos-audss-clk 3810000.audss-clock-controller: setup completed Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Fixes: 1241ef94ccc3 ("clk: samsung: register audio subsystem clocks using common clock framework") Cc: <stable@vger.kernel.org> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2014-12-02clk: samsung: exynos4: set parent of sclk_hdmiphy to hdmiAndrzej Hajda
sclk_hdmiphy clock is generated by HDMI-PHY and depends on hdmi gate clock. The patch models this dependency using parent/child hirerarchy. The patch fixes issue with system hangs during mixer device access, mixer uses sclk_hdmiphy descendant clock. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2014-12-02clk: samsung: exynos4415: Fix build with PM_SLEEP disabledKrzysztof Kozlowski
Fix following build errors when PM_SLEEP is disabled (e.g. by disabling SUSPEND and HIBERNATION): drivers/clk/samsung/clk-exynos4415.c: In function ‘exynos4415_cmu_init’: drivers/clk/samsung/clk-exynos4415.c:982:2: error: ‘exynos4415_ctx’ undeclared (first use in this function) drivers/clk/samsung/clk-exynos4415.c:982:2: note: each undeclared identifier is reported only once for each function it appears in drivers/clk/samsung/clk-exynos4415.c: In function ‘exynos4415_cmu_dmc_init’: drivers/clk/samsung/clk-exynos4415.c:1123:2: error: ‘exynos4415_dmc_ctx’ undeclared (first use in this function) make[3]: *** [drivers/clk/samsung/clk-exynos4415.o] Error 1 Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2014-12-02clk: samsung: remove unnecessary inclusion of header files from clk.hPankaj Dubey
Let's remove unnecessary include of header files from clk.h and add required one in clk.c Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com> [s.nawrocki@samsung.com: dropped removal of '#include <linux/syscore_ops.h>'] Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2014-12-02clk: samsung: remove unnecessary CONFIG_OF from clk.cPankaj Dubey
Remove unnecessary CONFIG_OF from samsung/clk.c. Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2014-12-02clk: samsung: Spelling s/bwtween/between/Pankaj Dubey
Fix a typo in comment section of "struct samsung_clk_provider". Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2014-11-30clk: mvebu: add suspend/resume for gatable clocksThomas Petazzoni
This commit adds suspend/resume support for the gatable clock driver used on Marvell EBU platforms. When getting out of suspend, the Marvell EBU platforms go through the bootloader, which re-enables all gatable clocks. However, upon resume, the clock framework will not disable again all gatable clocks that are not used. Therefore, if the clock driver does not save/restore the state of the gatable clocks, all gatable clocks that are not claimed by any device driver will remain enabled after a resume. This is why this driver saves and restores the state of those clocks. Since clocks aren't real devices, we don't have the normal ->suspend() and ->resume() of the device model, and have to use the ->suspend() and ->resume() hooks of the syscore_ops mechanism. This mechanism has the unfortunate idea of not providing a way of passing private data, which requires us to change the driver to make the assumption that there is only once instance of the gatable clock control structure. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Mike Turquette <mturquette@linaro.org> Cc: linux-kernel@vger.kernel.org Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Link: https://lkml.kernel.org/r/1416585613-2113-9-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-11-28Merge tag 'ib-mfd-regulator-clk-v3.19' of ↵Michael Turquette
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into clk-next Immutable branch between MFD, Regulator and Clk, due for v3.19
2014-11-28Merge tag 'v3.19-rockchip-clk2' of ↵Michael Turquette
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-next - clock phase setting capability for the rk3288 mmc clocks - pll init to allow syncing to actual rate table values - some more exported clocks - fixes for some clocks (typos etc) all of them not yet used in actual drivers
2014-11-28ARM: vexpress: Remove non-DT codePawel Moll
Now, with the CLCD DT support available, there is no more reason to keep the non-DT support for V2P-CA9. Removed, together with "some" supporting code. It was necessary to make PLAT_VERSATILE_SCHED_CLOCK optional and selected by the machines still interested in it. Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-28Merge tag 'samsung-pm-3' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/soc Pull "Samsung PM 3rd updates for v3.19" from Kukjin Kim: - exynos3250 : add PMU support - PMU refactoring : move restart code into PMU driver : move restart code for exynos440 into clk driver - use u8 for val[] in struct exynos_pmu_conf Note that this branch is based on tags/samsung-exynos-v3.19 * tag 'samsung-pm-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: EXYNOS: use u8 for val[] in struct exynos_pmu_conf ARM: EXYNOS: move restart code into pmu driver clk: exynos5440: move restart code into clock driver ARM: EXYNOS: add exynos3250 PMU support Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-28clk: rockchip: Add support for the mmc clock phases using the frameworkAlexandru M Stan
This patch adds the 2 physical clocks for the mmc (drive and sample). They're mostly there for the phase properties, but they also show the true clock (by dividing by RK3288_MMC_CLKGEN_DIV). The drive and sample phases are generated by dividing an upstream parent clock by 2, this allows us to adjust the phase by 90 deg. There's also an option to have up to 255 delay elements (40-80 picoseconds long). This driver uses those elements (under the assumption that they're 60 ps long) to generate approximate 22.5 degrees options. 67.5 (22.5*3) might be as high as 90 deg if the delay elements are as big as 80 ps, so a finer division (smaller than 22.5) was not picked because the phase might not be monotonic anymore. Suggested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Alexandru M Stan <amstan@chromium.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-11-28clk: rockchip: rk3288 export i2s0_clkout for use in DTSonny Rao
This exposes the clock that comes out of the i2s block which generally goes to the audio codec. Signed-off-by: Sonny Rao <sonnyrao@chromium.org> [removed CLK_SET_RATE_PARENT from original patch] Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-11-26clk: rockchip: use clock ID for DMC (memory controller) on rk3288Jeff Chen
The DMC clocks need to be turned off at runtime. Use the newly assigned clock IDs to export them. Signed-off-by: Jeff Chen <cym@rock-chips.com> [dianders: split into two patches; adjusted commit msg] Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2014-11-26clk: tegra: Implement memory-controller clockThierry Reding
The memory controller clock runs either at half or the same frequency as the EMC clock. Reviewed-By: Tomeu Vizoso <tomeu.vizoso@collabora.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-25clk: clk-s2mps11: fix semicolon.cocci warningskbuild test robot
drivers/clk/clk-s2mps11.c:181:2-3: Unneeded semicolon Removes unneeded semicolon. Generated by: scripts/coccinelle/misc/semicolon.cocci CC: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Michael Turquette <mturquette@linaro.org>
2014-11-25clk: s2mps11: Add the support for S2MPS13 PMIC clockChanwoo Choi
This patch adds the support for S2MPS13 PMIC clock which is same with existing S2MPS14 RTC IP. But, S2MPS13 uses all of clocks (32khz_{ap|bt|cp}). Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Michael Turquette <mturquette@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-11-25clk: rockchip: add ROCKCHIP_PLL_SYNC_RATE flag to some pllsHeiko Stuebner
Add the new flag to gpll and cpll on rk3188 and similar and to gpll, cpll and npll on rk3288. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Kever Yang <kever.yang@rock-chips.com>
2014-11-25clk: rockchip: add optional sync to pll rate parametersHeiko Stuebner
In some cases firmware brings up plls with different parameters than the ones noted in the rate table for the specific frequency. These firmware-selected parameters are worse than the tested ones in the pll rate tables but cannot be changed by a simple clk_set_rate call when the rate stays the same. Therefore add a ROCKCHIP_PLL_SYNC_RATE flag and implement an init callback that checks the runtime-parameters against the matching rate table entry and adjusts them to the table-ones if necessary. If no rate table is set or the current rate does not match any rate-table entry no changes are made. Being able to limit this adjustment to specific plls is necessary to not touch the ones supplying core components like the apll and dpll supplying the armcores and dram. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Kever Yang <kever.yang@rock-chips.com>
2014-11-25clk: rockchip: setup pll_mux data earlierHeiko Stuebner
In some cases we might need to access the data of the pll mux before the actual mux gets registered - like in the following patch adding an init-callback. Therefore populate pll_mux before registering the core pll-clock. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Kever Yang <kever.yang@rock-chips.com>
2014-11-25clk: rockchip: add ability to specify pll-specific flagsHeiko Stuebner
This adds a flag parameter to plls that allows us to create special flags to tweak the behaviour of the plls if necessary. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Kever Yang <kever.yang@rock-chips.com>
2014-11-24Merge tag 'sunxi-clocks-for-3.19' of ↵Michael Turquette
https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into clk-next Allwinner Clocks additions for 3.19 A few patches that should go through the clock tree, mostly fixes, cleanups, and new clocks additions to start to support the A80.