summaryrefslogtreecommitdiff
path: root/drivers/clocksource
AgeCommit message (Collapse)Author
2016-03-24Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fix from Thomas Gleixner: "A single fix to the pistachio clocksource driver using the proper signedness in the error print format" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource/drivers/pistachio: Correct output format of PTR_ERR()
2016-03-23clocksource/drivers/pistachio: Correct output format of PTR_ERR()Vladimir Zapolskiy
Use signed integer output in the pr_err() string format, here PTR_ERR() value is negative and it should be reported in human readable way. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Cc: Jisheng Zhang <jszhang@marvell.com> Cc: Ezequiel Garcia <ezequiel.garcia@imgtec.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Link: http://lkml.kernel.org/r/1458603727-4446-1-git-send-email-vz@mleia.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-03-16Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull KVM updates from Paolo Bonzini: "One of the largest releases for KVM... Hardly any generic changes, but lots of architecture-specific updates. ARM: - VHE support so that we can run the kernel at EL2 on ARMv8.1 systems - PMU support for guests - 32bit world switch rewritten in C - various optimizations to the vgic save/restore code. PPC: - enabled KVM-VFIO integration ("VFIO device") - optimizations to speed up IPIs between vcpus - in-kernel handling of IOMMU hypercalls - support for dynamic DMA windows (DDW). s390: - provide the floating point registers via sync regs; - separated instruction vs. data accesses - dirty log improvements for huge guests - bugfixes and documentation improvements. x86: - Hyper-V VMBus hypercall userspace exit - alternative implementation of lowest-priority interrupts using vector hashing (for better VT-d posted interrupt support) - fixed guest debugging with nested virtualizations - improved interrupt tracking in the in-kernel IOAPIC - generic infrastructure for tracking writes to guest memory - currently its only use is to speedup the legacy shadow paging (pre-EPT) case, but in the future it will be used for virtual GPUs as well - much cleanup (LAPIC, kvmclock, MMU, PIT), including ubsan fixes" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (217 commits) KVM: x86: remove eager_fpu field of struct kvm_vcpu_arch KVM: x86: disable MPX if host did not enable MPX XSAVE features arm64: KVM: vgic-v3: Only wipe LRs on vcpu exit arm64: KVM: vgic-v3: Reset LRs at boot time arm64: KVM: vgic-v3: Do not save an LR known to be empty arm64: KVM: vgic-v3: Save maintenance interrupt state only if required arm64: KVM: vgic-v3: Avoid accessing ICH registers KVM: arm/arm64: vgic-v2: Make GICD_SGIR quicker to hit KVM: arm/arm64: vgic-v2: Only wipe LRs on vcpu exit KVM: arm/arm64: vgic-v2: Reset LRs at boot time KVM: arm/arm64: vgic-v2: Do not save an LR known to be empty KVM: arm/arm64: vgic-v2: Move GICH_ELRSR saving to its own function KVM: arm/arm64: vgic-v2: Save maintenance interrupt state only if required KVM: arm/arm64: vgic-v2: Avoid accessing GICH registers KVM: s390: allocate only one DMA page per VM KVM: s390: enable STFLE interpretation only if enabled for the guest KVM: s390: wake up when the VCPU cpu timer expires KVM: s390: step the VCPU timer while in enabled wait KVM: s390: protect VCPU cpu timer with a seqcount KVM: s390: step VCPU cpu timer during kvm_run ioctl ...
2016-03-15Merge branch 'timers-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Thomas Gleixner: "The timer department delivers this time: - Support for cross clock domain timestamps in the core code plus a first user. That allows more precise timestamping for PTP and later for audio and other peripherals. The ptp/e1000e patches have been acked by the relevant maintainers and are carried in the timer tree to avoid merge ordering issues. - Support for unregistering the current clocksource watchdog. That lifts a limitation for switching clocksources which has been there from day 1 - The usual pile of fixes and updates to the core and the drivers. Nothing outstanding and exciting" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (26 commits) time/timekeeping: Work around false positive GCC warning e1000e: Adds hardware supported cross timestamp on e1000e nic ptp: Add PTP_SYS_OFFSET_PRECISE for driver crosstimestamping x86/tsc: Always Running Timer (ART) correlated clocksource hrtimer: Revert CLOCK_MONOTONIC_RAW support time: Add history to cross timestamp interface supporting slower devices time: Add driver cross timestamp interface for higher precision time synchronization time: Remove duplicated code in ktime_get_raw_and_real() time: Add timekeeping snapshot code capturing system time and counter time: Add cycles to nanoseconds translation jiffies: Use CLOCKSOURCE_MASK instead of constant clocksource: Introduce clocksource_freq2mult() clockevents/drivers/exynos_mct: Implement ->set_state_oneshot_stopped() clockevents/drivers/arm_global_timer: Implement ->set_state_oneshot_stopped() clockevents/drivers/arm_arch_timer: Implement ->set_state_oneshot_stopped() clocksource/drivers/arm_global_timer: Register delay timer clocksource/drivers/lpc32xx: Support timer-based ARM delay clocksource/drivers/lpc32xx: Support periodic mode clocksource/drivers/lpc32xx: Don't use the prescaler counter for clockevents clocksource/drivers/rockchip: Add err handle for rk_timer_init ...
2016-02-29arm64: Allow the arch timer to use the HYP timerMarc Zyngier
With the ARMv8.1 VHE, the kernel can run in HYP mode, and thus use the HYP timer instead of the normal guest timer in a mostly transparent way, except for the interrupt line. This patch reworks the arch timer code to allow the selection of the HYP PPI, possibly falling back to the guest timer if not available. Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-02-25clockevents/drivers/exynos_mct: Implement ->set_state_oneshot_stopped()Viresh Kumar
set_state_oneshot_stopped() is called by the clkevt core, when the next event is required at an expiry time of 'KTIME_MAX'. This normally happens with NO_HZ_{IDLE|FULL} in both LOWRES/HIGHRES modes. This patch makes the clockevent device to stop on such an event, to avoid spurious interrupts, as explained by: commit 8fff52fd5093 ("clockevents: Introduce CLOCK_EVT_STATE_ONESHOT_STOPPED state"). Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2016-02-25clockevents/drivers/arm_global_timer: Implement ->set_state_oneshot_stopped()Viresh Kumar
set_state_oneshot_stopped() is called by the clkevt core, when the next event is required at an expiry time of 'KTIME_MAX'. This normally happens with NO_HZ_{IDLE|FULL} in both LOWRES/HIGHRES modes. This patch makes the clockevent device to stop on such an event, to avoid spurious interrupts, as explained by: commit 8fff52fd5093 ("clockevents: Introduce CLOCK_EVT_STATE_ONESHOT_STOPPED state"). Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2016-02-25clockevents/drivers/arm_arch_timer: Implement ->set_state_oneshot_stopped()Viresh Kumar
set_state_oneshot_stopped() is called by the clkevt core, when the next event is required at an expiry time of 'KTIME_MAX'. This normally happens with NO_HZ_{IDLE|FULL} in both LOWRES/HIGHRES modes. This patch makes the clockevent device to stop on such an event, to avoid spurious interrupts, as explained by: commit 8fff52fd5093 ("clockevents: Introduce CLOCK_EVT_STATE_ONESHOT_STOPPED state"). Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2016-02-25clocksource/drivers/arm_global_timer: Register delay timerRabin Vincent
Provide a delay timer using the lower 32-bits of the global timer so that we can use that instead of having to calibrating delays. Signed-off-by: Rabin Vincent <rabin.vincent@axis.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2016-02-25clocksource/drivers/lpc32xx: Support timer-based ARM delayEzequiel Garcia
This commit implements the ARM timer-based delay timer for the LPC32xx, LPC18xx, LPC43xx family of SoCs. Also, add a dependency to restrict compiling this driver for the ARM architecture. Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Joachim Eastwood <manabian@gmail.com> Tested-by: Joachim Eastwood <manabian@gmail.com>
2016-02-25clocksource/drivers/lpc32xx: Support periodic modeEzequiel Garcia
This commit adds the support for periodic mode. This is done by not setting the MR0S (Stop on TnMR0) bit on MCR, thus allowing interrupts to be periodically generated on MR0 matches. In order to do this, move the initial configuration that is specific to the one-shot mode to set_state_oneshot(). Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Joachim Eastwood <manabian@gmail.com> Tested-by: Joachim Eastwood <manabian@gmail.com>
2016-02-25clocksource/drivers/lpc32xx: Don't use the prescaler counter for clockeventsEzequiel Garcia
This commit switches the clockevents one-shot current implementation to avoid using the prescaler counter. The clockevents timer currently uses MR0=1, PR=ticks; and after this commit is uses MR0=ticks, PR=0. While using the prescaler with PR=1 works fine in one-shot mode, it seems it doesn't work as expected in periodic mode. By using the only match channel register (MR0) for the timer we make the periodic mode introduction easier, and consistent with one-shot mode. Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reviewed-by: Joachim Eastwood <manabian@gmail.com> Tested-by: Joachim Eastwood <manabian@gmail.com>
2016-02-25clocksource/drivers/rockchip: Add err handle for rk_timer_initShawn Lin
Currently rockchip_timer doesn't do some basic cleanup work when failing to init the timer. Let's add err handle routine to deal with all the err cases. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2016-02-25clocksource/drivers/arm_arch_timer: Enable and verify MMIO accessRobin Murphy
So far, we have been blindly assuming that having access to a memory-mapped timer frame implies that the individual elements of that frame frame are already enabled. Whilst it's the firmware's job to give us non-secure access to frames in the first place, we should not rely on implementations always being generous enough to also configure CNTACR for those non-secure frames (e.g. [1]). Explicitly enable feature-level access per-frame, and verify that the access we want is really implemented before trying to make use of it. [1]:https://github.com/ARM-software/tf-issues/issues/170 Acked-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Tested-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2016-01-31Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fixes from Thomas Gleixner: "The timer departement delivers: - a regression fix for the NTP code along with a proper selftest - prevent a spurious timer interrupt in the NOHZ lowres code - a fix for user space interfaces returning the remaining time on architectures with CONFIG_TIME_LOW_RES=y - a few patches to fix COMPILE_TEST fallout" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tick/nohz: Set the correct expiry when switching to nohz/lowres mode clocksource: Fix dependencies for archs w/o HAS_IOMEM clocksource: Select CLKSRC_MMIO where needed tick/sched: Hide unused oneshot timer code kselftests: timers: Add adjtimex SETOFFSET validity tests ntp: Fix ADJ_SETOFFSET being used w/ ADJ_NANO itimers: Handle relative timers with CONFIG_TIME_LOW_RES proper posix-timers: Handle relative timers with CONFIG_TIME_LOW_RES proper timerfd: Handle relative timers with CONFIG_TIME_LOW_RES proper hrtimer: Handle remaining time proper for TIME_LOW_RES clockevents/tcb_clksrc: Prevent disabling an already disabled clock
2016-01-26clocksource: Fix dependencies for archs w/o HAS_IOMEMRichard Weinberger
Not every arch has io memory. So, unbreak the build by fixing the dependencies. Signed-off-by: Richard Weinberger <richard@nod.at> Cc: user-mode-linux-devel@lists.sourceforge.net Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Link: http://lkml.kernel.org/r/1453760661-1444-21-git-send-email-richard@nod.at Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-01-26clocksource: Select CLKSRC_MMIO where neededArnd Bergmann
The Tegra clocksource implementation uses the clocksource_mmio helper functions, but currently can be configured without them, which fails: drivers/clocksource/built-in.o: In function `tegra20_init_timer': :(.init.text+0xac): undefined reference to `clocksource_mmio_init' :(.init.text+0x140): undefined reference to `clocksource_mmio_readl_up' The same problem exists for Digicolor: drivers/clocksource/built-in.o: In function `digicolor_timer_init': :(.init.text+0xfa): undefined reference to `clocksource_mmio_init' :(.init.text+0x14c): undefined reference to `clocksource_mmio_readl_down' I've inspected the Kconfig file to look for other cases that I have not yet run into, and added an explicit 'select' to each one to ensure we can successfully link the drivers. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: linux-arm-kernel@lists.infradead.org Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Link: http://lkml.kernel.org/r/1453737776-1960372-1-git-send-email-arnd@arndb.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-01-20Merge tag 'armsoc-cleanup' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanups from Olof Johansson: "A smallish number of general cleanup commits this release cycle. Some of these are minor tweaks: - shmobile change of binding for their GIC (using arm,pl390 now) - ARCH_RENESAS introduction - Misc other renesas updates There's also a couple of treewide commits from Masahiro Yamada cleaning up const/__initconst for SMP operation structs and a switch to using "depends on" instead of if-constructs on most of the Kconfig platform targets" * tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: staging: board: armadillo800eva: Use "arm,pl390" staging: board: kzm9d: Use "arm,pl390" ARM: shmobile: r8a7778 dtsi: Use "arm,pl390" for GIC ARM: shmobile: emev2 dtsi: Use "arm,pl390" for GIC ARM: shmobile: r8a7740 dtsi: Use "arm,pl390" for GIC ARM: shmobile: r7s72100 dtsi: Use "arm,pl390" for GIC ARM: use "depends on" for SoC configs instead of "if" after prompt ARM/clocksource: use automatic DT probing for ux500 PRCMU ARM: use const and __initconst for smp_operations ARM: hisi: do not export smp_operations structures ARM: mvebu: remove unused mach/gpio.h ARM: shmobile: Remove legacy mach/irqs.h ARM: shmobile: Introduce ARCH_RENESAS MAINTAINERS: Remove link to oss.renesas.com which is closed
2016-01-15clockevents/tcb_clksrc: Prevent disabling an already disabled clockAlexandre Belloni
clockevents_exchange_device is calling clockevents_shutdown() on the new clockenvents device but it may have never been enabled in the first place. This results in the tcb clock being disabled without being enabled first: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1 at drivers/clk/clk.c:680 clk_disable+0x28/0x34() Modules linked in: CPU: 0 PID: 1 Comm: swapper Not tainted 4.4.0+ #6 Hardware name: Atmel AT91SAM9 [<c000f2b8>] (unwind_backtrace) from [<c000d01c>] (show_stack+0x10/0x14) [<c000d01c>] (show_stack) from [<c00172f0>] (warn_slowpath_common+0x78/0xa0) [<c00172f0>] (warn_slowpath_common) from [<c00173a8>] (warn_slowpath_null+0x18/0x20) [<c00173a8>] (warn_slowpath_null) from [<c0361528>] (clk_disable+0x28/0x34) [<c0361528>] (clk_disable) from [<c034d560>] (tc_shutdown+0x38/0x4c) [<c034d560>] (tc_shutdown) from [<c0059ad4>] (clockevents_switch_state+0x38/0x6c) [<c0059ad4>] (clockevents_switch_state) from [<c0059b18>] (clockevents_shutdown+0x10/0x24) [<c0059b18>] (clockevents_shutdown) from [<c005a458>] (tick_check_new_device+0x84/0xac) [<c005a458>] (tick_check_new_device) from [<c0059660>] (clockevents_register_device+0x7c/0x108) [<c0059660>] (clockevents_register_device) from [<c06b5a68>] (tcb_clksrc_init+0x390/0x3e8) [<c06b5a68>] (tcb_clksrc_init) from [<c00097cc>] (do_one_initcall+0x114/0x1d4) [<c00097cc>] (do_one_initcall) from [<c069bd54>] (kernel_init_freeable+0xfc/0x1b8) [<c069bd54>] (kernel_init_freeable) from [<c04c3818>] (kernel_init+0x8/0xe0) [<c04c3818>] (kernel_init) from [<c000a410>] (ret_from_fork+0x14/0x24) ---[ end trace 0000000000000001 ]--- Check what state we were in before trying to disable the clock. Fixes: cf4541c101ea ("clockevents/drivers/tcb_clksrc: Migrate to new 'set-state' interface") Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1452854061-30370-1-git-send-email-alexandre.belloni@free-electrons.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-01-12Merge branches 'clockevents/4.4-fixes' and 'clockevents/4.5-fixes' of ↵Thomas Gleixner
http://git.linaro.org/people/daniel.lezcano/linux into timers/urgent Pull in fixes from Daniel Lezcano: - Fix the vt8500 timer leading to a system lock up when dealing with too small delta (Roman Volkov) - Select the CLKSRC_MMIO when the fsl_ftm_timer is enabled with COMPILE_TEST (Daniel Lezcano) - Prevent to compile timers using the 'iomem' API when the architecture has not HAS_IOMEM set (Richard Weinberger)
2016-01-11clocksource/drivers/vt8500: Increase the minimum deltaRoman Volkov
The vt8500 clocksource driver declares itself as capable to handle the minimum delay of 4 cycles by passing the value into clockevents_config_and_register(). The vt8500_timer_set_next_event() requires the passed cycles value to be at least 16. The impact is that userspace hangs in nanosleep() calls with small delay intervals. This problem is reproducible in Linux 4.2 starting from: c6eb3f70d448 ('hrtimer: Get rid of hrtimer softirq') From Russell King, more detailed explanation: "It's a speciality of the StrongARM/PXA hardware. It takes a certain number of OSCR cycles for the value written to hit the compare registers. So, if a very small delta is written (eg, the compare register is written with a value of OSCR + 1), the OSCR will have incremented past this value before it hits the underlying hardware. The result is, that you end up waiting a very long time for the OSCR to wrap before the event fires. So, we introduce a check in set_next_event() to detect this and return -ETIME if the calculated delta is too small, which causes the generic clockevents code to retry after adding the min_delta specified in clockevents_config_and_register() to the current time value. min_delta must be sufficient that we don't re-trip the -ETIME check - if we do, we will return -ETIME, forward the next event time, try to set it, return -ETIME again, and basically lock the system up. So, min_delta must be larger than the check inside set_next_event(). A factor of two was chosen to ensure that this situation would never occur. The PXA code worked on PXA systems for years, and I'd suggest no one changes this mechanism without access to a wide range of PXA systems, otherwise they're risking breakage." Cc: stable@vger.kernel.org Cc: Russell King <linux@arm.linux.org.uk> Acked-by: Alexey Charkov <alchark@gmail.com> Signed-off-by: Roman Volkov <rvolkov@v1ros.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2016-01-11clocksource/drivers/fsl_ftm_timer: Fix CLKSRC_MMIO dependencyDaniel Lezcano
Select CLKSRC_MMIO when FSL_FTM_TIMER is enabled. Otherwise it fails to compile on i386 with COMPILE_TEST=y. " on i386: when CLKSRC_MMIO is not enabled: drivers/built-in.o: In function `ftm_timer_init': fsl_ftm_timer.c:(.init.text+0x6842): undefined reference to `clocksource_mmio_readl_up' fsl_ftm_timer.c:(.init.text+0x6855): undefined reference to `clocksource_mmio_init' " Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2016-01-11clocksource/drivers: Fix dependencies for !HAS_IOMEM archsRichard Weinberger
Not every arch has io memory. So, unbreak the build by fixing the dependencies. Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-12-29clocksource/drivers/acpi_pm: Convert to pr_* macrosAndy Shevchenko
Like it's already done in one place in the driver, convert the rest to use pr_* macros instead of printk(KERN_LEVEL) calls. While here, join strings to be one string for one line to make grep on them easier. There is no functional change. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Link: http://lkml.kernel.org/r/1451310085-113182-1-git-send-email-andriy.shevchenko@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-12-16clocksource/drivers/h8300: Use ioread / iowriteYoshinori Sato
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-12-16clocksource/drivers/h8300: Initializer cleanup.Yoshinori Sato
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-12-16clocksource/drivers/h8300: Simplify delta handlingYoshinori Sato
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-12-16clocksource/drivers/h8300: Fix timer not overflow caseYoshinori Sato
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-12-16clocksource/drivers/h8300: Change to overflow interruptYoshinori Sato
Counter overflow detection use for overflow interrupt Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-12-16clocksource/drivers/lpc32: Correct pr_err() output formatVladimir Zapolskiy
If by some reason timerclk is not available, both clockevent and clocksource initializations correctly exit, but output of errno to kernel log buffer may be confusing: lpc32xx_clk_init: failed to map system control block registers lpc32xx_clocksource_init: clock get failed (4294966779) lpc32xx_clockevent_init: clock get failed (4294966779) Use signed integer output in the correspondent pr_err() string formats: lpc32xx_clocksource_init: clock get failed (-517) lpc32xx_clockevent_init: clock get failed (-517) Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-12-16clocksource/drivers/arm_global_timer: Fix suspend resumeGrygorii Strashko
Now the System stall is observed on TI AM437x based board (am437x-gp-evm) during resuming from System suspend when ARM Global timer is selected as clocksource device (CPUIdle not enabled) - SysRq are working, but nothing else. The reason of stall is that ARM Global timer loses its contexts during System suspend: GT_CONTROL.TIMER_ENABLE = 0 (unbanked) GT_COUNTERx = 0 Hence, update ARM Global timer driver to reflect above behaviour - re-enable ARM Global timer on resume (GT_CONTROL.TIMER_ENABLE = 1) if not enabled. CC: Arnd Bergmann <arnd@arndb.de> Cc: John Stultz <john.stultz@linaro.org> Cc: Felipe Balbi <balbi@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-12-16clocksource/drivers/pistachio: Fix wrong calculated clocksource read valueJisheng Zhang
Let's assume the counter value is 0xf0000000, the pistachio clocksource read cycles function should return ~0x0fffffff but actually it returns 0xffffffff0fffffff. That occurs because: ~(cycle_t)value is different from (cycle_t)~value. unsigned long val = ~(unsigned long)0xf0000000; 40049a: 48 b8 ff ff ff 0f ff movabs $0xffffffff0fffffff,%rax unsigned long val = (unsigned long)~0xf0000000; 40049a: 48 c7 45 f8 ff ff ff movq $0xfffffff,-0x8(%rbp) We fix this issue by calculating bitwise-not counter, then cast to cycle_t. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-12-16clockevents/drivers/arm_global_timer: Use writel_relaxed in gt_compare_setJisheng Zhang
Use the relaxed version to improve performance. we measured time of 4096 rounds of gt_compare_set() spent on Marvell BG2Q: before the patch: 3690648ns on average after the patch: 1083023ns on average improved by 70%! Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-12-15clocksource/drivers/dw_apb_timer: Inline apbt_readl and apbt_writelJisheng Zhang
It seems gcc can automatically inline apbt_writel() for us, but apbt_real isn't inlined. This patch makes them inline to get a trivial performance improvement: 4096 rounds of __apbt_read_clocksource() call spend time on Marvell BG4CT platform: before the patch 1275240ns on average after the patch 1263240ns on average so we get 1% performance improvement. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-12-15clocksource/drivers/dw_apb_timer: Use {readl|writel}_relaxed in critical pathJisheng Zhang
It's safe to use the relaxed version. From another side, the relaxed io accessor macros are available on all architectures now, so we can use the relaxed versions to get a trivial system performance improvement, we measured time the following functions spent on Marvell BG4CT: 4096 rounds of __apbt_read_clocksource() call: before the patch: 1263240ns on average after the patch: 1250080ns on average improved by 1% 4096 rounds of apbt_eoi() call: before the patch: 1290960ns on average after the patch: 1248240ns on average 4096 rounds of apbt_next_event() call: before the patch: 3333660ns on average after the patch: 1322040ns on average improved by 60%! Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-12-15clocksource/drivers/dw_apb_timer: Fix apbt_readl return typesJisheng Zhang
On Marvell BG4CT platform, we observed the __apbt_read_clocksource() return wrong value: Let's assume the APBTMR_N_CURRENT_VALUE value is 0xf0000000, we got 0xffffffff0fffffff, but it should be 0xfffffff. This issue should be common on all 64bit platforms. We fix the issue by letting aptb_readl() return u32. apbt_writel() is also updated to write u32 val rather than unsigned long. Signed-off-by: Jisheng Zhang <jszhang@marvell.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-12-15clocksource/drivers/tango-xtal: Replace code by clocksource_mmio_initDaniel Lezcano
The current code to initialize, register and read the clocksource is already factored out in mmio.c via the clocksource_mmio_init function. Factor out the code with the clocksource_mmio_init function. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-12-15clocksource/drivers/h8300: Increase the compilation test coverageDaniel Lezcano
Add the COMPILE_TEST option so the drivers can be compiled on different architecture with the 'allyesconfig' kernel configuration. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-12-15h8300: Rename ctlr_out/in[bwl] to raw_read/write[bwl]Daniel Lezcano
For the sake of consistency, let rename all ctrl_out/in calls to the write/read calls so we have the same API consistent with the other architectures hence open the door for the increasing of the test compilation coverage. The unsigned long coercive cast is removed because all variables are set to the right type "void __iomem *". Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-12-15clocksource/drivers/h8300_timer8: Separate the Kconfig option from the archDaniel Lezcano
The current Kconfig option is the H8300 arch option. In order to comply to the current rule, let's create a specific option for the timer8 and select it from the arch's Kconfig. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-12-15clocksource/drivers/timer_sun5i: Replace code by clocksource_mmio_initDaniel Lezcano
The current code to initialize, register and read the clocksource is already factored out in mmio.c via the clocksource_mmio_init function. The only difference is the readl vs readl_relaxed. Factor out the code with the clocksource_mmio_init function. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2015-12-15clocksource/drivers/h8300_timer16: Remove pointless lockDaniel Lezcano
The lock in the timer16_clocksource_read is not needed, remove it. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-12-15clocksource/drivers/h8300_timer16: Fix irq return value checkDaniel Lezcano
The function irq_of_parse_and_map returns zero in case of failure. Fix the return code test to check against zero. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-12-15clocksource/drivers/h8300_timer16: Remove unused fields in timer16_privDaniel Lezcano
The fields are not used in the code, remove them. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-12-15clocksource/drivers/h8300_timer16: Remove unused macrosDaniel Lezcano
The macros are no longer used in the code, remove them. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-12-15clocksource/drivers/h8300_timer16: Remove pointless headersDaniel Lezcano
The headers are not needed, remove them. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-12-15clocksource/drivers/h8300_timer8: Retrieve the clock rate at init timeDaniel Lezcano
The current code retrieves the rate value when the timer is enabled which occurs each time a timer is re-armed. Except if the clock frequency has changed magically I don't see why this should be done each time. Retrieve the clock rate value at init time only. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-12-15clocksource/drivers/h8300_timer8: Remove irq and lock legacy codeDaniel Lezcano
The time framawork takes care of disabling the interrupts and takes a lock to prevent races. Remove the legacy code in the driver taking care of the races. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-12-15clocksource/drivers/h8300_timer8: Remove pointless irq re-entrant safe codeDaniel Lezcano
The current code assumes the interrupt function is re-entrant. That is not correct. An interrupt handler is never invoked concurrently. The interrupt line is masked on all processors. Remove the chewing flags in the code. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2015-12-15clocksource/drivers/h8300_timer8: Fix irq return value checkDaniel Lezcano
The value returned in case of error for the 'irq_of_parse_and_map' function is zero in case of error. Fix the check in the init code. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>