summaryrefslogtreecommitdiff
path: root/drivers/hwmon
AgeCommit message (Collapse)Author
2017-06-24hwmon: (aspeed-pwm-tacho) Poll with short sleeps.Patrick Venture
The reference driver polled but mentioned it was possible to sleep for a computed period to know when it's ready to read. However, polling with minimal sleeps is quick and works. This also improves responsiveness from the driver. Testing: tested on ast2400 on quanta-q71l Signed-off-by: Patrick Venture <venture@google.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-06-24hwmon: (aspeed-pwm-tacho) reduce fan_tach periodPatrick Venture
Reduce the fan_tach period such that the fan controller uses a shorter period to measure the rpm. The original period of 0x1000 was chosen as a conversative value from the reference implementation. Through experimentation on the quanta-q71l board, I was able to drive the number down which ultimately reduced the time the controller would use to determine the fan_tach. This value was recently tested and accepted downstream on the IBM Zaius board which uses the ast2500. Future work: It may be worthwhile as this is a tunable parameter to the system, to allow overriding it through the device tree. Testing: Tested on an ast2400 sitting on a quanta-q71l and ast2500 on power9. Signed-off-by: Patrick Venture <venture@google.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-06-20hwmon: (ibmpowernv) Add current(A) sensorShilpasri G Bhat
This patch exports current(A) sensors in inband sensors copied to main memory by OCC. Signed-off-by: Shilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-06-20hwmon: (ibmpowernv) introduce a legacy_compatibles arrayCédric Le Goater
Today, the type of a PowerNV sensor system is determined with the "compatible" property for legacy Firmwares and with the "sensor-type" for newer ones. The same array of strings is used for both to do the matching and this raises some issue to introduce new sensor types. Let's introduce two different arrays (legacy and current) to make things easier for new sensor types. Signed-off-by: Cédric Le Goater <clg@kaod.org> Tested-by: Shilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-06-11hwmon: (pwm-fan) Switch to new atomic PWM APIBartlomiej Zolnierkiewicz
Switch pwm-fan driver to new atomic PWM API. Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-06-11hwmon: (scpi) Fix the scale of SCP sensor readingsCarlo Caione
The implementation details for SCPI seems to suggest that the sensor readings must be reported by SCP using a well defined scale (millidegree Celsius for temperature, millivolts for voltage, milliamperes for current, microwatts for power and microjoules for energy). This is also important for the interaction with other subsystems: for example both the thermal sub-system and the hwmon sysfs interface expect the temperature expressed in millidegree Celsius. Unfortunately since this behaviour is dependent on the firmware implementation there are cases where the sensor readings are reported using a different scale. For example in the Amlogic SoCs the temperature is reported in degree and not millidegree Celsius. To take into account this discrepancy and fixup the values reported by SCP a new compatible 'amlogic,meson-gxbb-scpi-sensors' is introduced and used in this patch by the scpi-hwmon driver to convert the sensor readings to the expected scale. Signed-off-by: Carlo Caione <carlo@endlessm.com> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-06-11hwmon: (aspeed-pwm-tacho) Enable both edge measurement.Patrick Venture
The aspeed-pwm-tacho controller supports measuring the fan tach by using leading, falling, or both edges. This change allows the driver to support either of the three configurations and will appropriately modify the returned tach data. If the controller is measuring with both edges it can return a value more quickly to the requestor. This version of the driver should still take ~1s to return with an RPM value per fan, however, it can be tuned faster with double edge counting enabled than without. I tested this and found the number returned matched what I expected. Signed-off-by: Patrick Venture <venture@google.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-06-11hwmon: (ibmpowernv) Add highest/lowest attributes to sensorsShilpasri G Bhat
OCC provides historical minimum and maximum value for the sensor readings. This patch exports them as highest and lowest attributes for the inband sensors copied by OCC to main memory. Signed-off-by: Shilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-06-11hwmon: (pmbus) move header file out of I2C realmWolfram Sang
include/linux/i2c is not for client devices. Move the header file to a more appropriate location. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-06-11hwmon: (max6639) move header file out of I2C realmWolfram Sang
include/linux/i2c is not for client devices. Move the header file to a more appropriate location. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-06-11hwmon: (ltc4245) move header file out of I2C realmWolfram Sang
include/linux/i2c is not for client devices. Move the header file to a more appropriate location. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-06-11hwmon: (ds620) move header file out of I2C realmWolfram Sang
include/linux/i2c is not for client devices. Move the header file to a more appropriate location. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-06-11hwmon: (ads1015) move header file out of I2C realmWolfram Sang
include/linux/i2c is not for client devices. Move the header file to a more appropriate location. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-06-11hwmon: (adt7475) temperature smoothingChris Packham
When enabled temperature smoothing allows ramping the fan speed over a configurable period of time instead of jumping to the new speed instantaneously. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-06-11hwmon: (adt7475) add high frequency supportChris Packham
Systems using 4-wire fans usually require high frequency (22.5kHz) output on the pwm. Add 22500 as a valid option in the pwmfreq_table. In high frequency mode the low-order bit are ignored so they can safely be set to 0. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-06-11hwmon: (adt7475) fan stall preventionChris Packham
By default adt7475 will stop the fans (pwm duty cycle 0%) when the temperature drops past Tmin - hysteresis. Some systems want to keep the fans moving even when the temperature drops so add new sysfs attributes that configure the enhanced acoustics min 1-3 which allows the fans to run at the minimum configure pwm duty cycle. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-06-11hwmon: (adt7475) replace find_nearest() with find_closest()Chris Packham
The adt7475 has had find_nearest() since it's creation in 2009. Since then find_closest() has been introduced and several drivers have been updated to use it. Update the adt7475 to use find_closest() and remove the now unused find_nearest(). Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-06-11hwmon: (pmbus) Add client driver for IR35221Samuel Mendoza-Jonas
IR35221 is a Digital DC-DC Multiphase Converter Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com> [groeck: Preserve alphabetic order in Kconfig; add missing break statements (from Dan Carpenter); add missing error checks] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-06-11hwmon: (nct6775) Add support for NCT6795DGuenter Roeck
NCT6795D is mostly compatible to NCT6793D with a few minor differences. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-06-11hwmon: (nct6775) Improve fan detectionGuenter Roeck
Recent chips support multiple pins for fan speed inputs and fan control outputs. Examine all of them to determine supported fan controls. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-06-11hwmon: (nct6775) Rework temperature source and label handlingGuenter Roeck
Instead of checking if a temperature source has a label, use a bit mask to determine if a temperature source is valid for a given chip. This simplifies the code and, if necessary, lets us support chips with unknown or incomplete labels. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-06-11hwmon: (nct6775) Use bitopsGuenter Roeck
Using bitops instead of shift operations makes the code easier to read. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-06-03hwmon: (aspeed-pwm-tacho) make fan/pwm names start with index 1Stefan Schaeckeler
Make fan and pwm names in sysfs start with index 1 in accordance to Documentation/hwmon/sysfs-interface conventions. Current implementation starts with index 0, making tools such as sensors(1) skip the first fan. Signed-off-by: Stefan Schaeckeler <sschaeck@cisco.com> Fixes: 2d7a548a3eff ("drivers: hwmon: Support for ASPEED PWM/Fan tach") Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-06-03hwmon: (aspeed-pwm-tacho) Call of_node_put() on a node not claimedStefan Schaeckeler
Call of_node_put() on a node claimed with of_node_get() or by any other means such as for_each_child_of_node(). Signed-off-by: Stefan Schaeckeler <sschaeck@cisco.com> Fixes: 2d7a548a3eff ("drivers: hwmon: Support for ASPEED PWM/Fan tach") Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-05-30hwmon: (aspeed-pwm-tacho) On read failure return -ETIMEDOUTPatrick Venture
When the controller fails to provide an RPM reading within the alloted time; the driver returns -ETIMEDOUT and no file contents. Signed-off-by: Patrick Venture <venture@google.com> Fixes: 2d7a548a3eff ("drivers: hwmon: Support for ASPEED PWM/Fan tach") Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-05-30hwmon: (aspeed-pwm-tacho) Select REGMAPGuenter Roeck
The driver uses regmap and thus has to select it to avoid build errors such as the following. drivers/hwmon/aspeed-pwm-tacho.c:337:21: error: variable 'aspeed_pwm_tacho_regmap_config' has initializer but incomplete type Reported-by: kbuild test robot <fengguang.wu@intel.com> Acked-by: Joel Stanley <joel@jms.id.au> Fixes: 2d7a548a3eff ("drivers: hwmon: Support for ASPEED PWM/Fan tach") Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-05-14hwmon: (coretemp) Handle frozen hotplug state correctlyThomas Gleixner
The recent conversion to the hotplug state machine missed that the original hotplug notifiers did not execute in the frozen state, which is used on suspend on resume. This does not matter on single socket machines, but on multi socket systems this breaks when the device for a non-boot socket is removed when the last CPU of that socket is brought offline. The device removal locks up the machine hard w/o any debug output. Prevent executing the hotplug callbacks when cpuhp_tasks_frozen is true. Thanks to Tommi for providing debug information patiently while I failed to spot the obvious. Fixes: e00ca5df37ad ("hwmon: (coretemp) Convert to hotplug state machine") Reported-by: Tommi Rantala <tt.rantala@gmail.com> Tested-by: Tommi Rantala <tt.rantala@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-04-30hwmon: (twl4030-madc) drop driverSebastian Reichel
This driver is no longer needed: * It has no mainline users * It has no DT support and OMAP is DT only * iio-hwmon can be used for madc, which also works with DT Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-04-24hwmon: (tmp103) Use SIMPLE_DEV_PM_OPS helper macroRahul Bedarkar
Replace ifdefs with SIMPLE_DEV_PM_OPS helper macro. Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com> Acked-by: Heiko Schocher <hs@denx.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-04-21hwmon: (adt7475) set start bit in probeChris Packham
The ADT7475 and ADT7476 have the STRT bit cleared by default[1]. Before any monitoring activities the STRT bit needs to be set. Logically this needs to happen before any of the sensors are read so the probe() function seems the best place for it. [1] - https://www.onsemi.com/pub/Collateral/ADT7475-D.PDF Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-04-21hwmon: (ina209) Handled signed registersJoe Schaack
The shunt voltage and current registers are signed 16-bit values so handle them as such. Signed-off-by: Joe Schaack <jschaack@xes-inc.com> Reviewed-by: Aaron Sierra <asierra@xes-inc.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-04-13hwmon: (lm87) Add OF device ID tableJavier Martinez Canillas
The driver doesn't have a struct of_device_id table but supported devices are registered via Device Trees. This is working on the assumption that a I2C device registered via OF will always match a legacy I2C device ID and that the MODALIAS reported will always be of the form i2c:<device>. But this could change in the future so the correct approach is to have an OF device ID table if the devices are registered via OF. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-04-13hwmon: (lm87) Remove unused I2C devices driver_dataJavier Martinez Canillas
The I2C device ID entries set a .driver_data but this data is never looked up by the driver. So don't set it and also remove the enum. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-04-10drivers: hwmon: Support for ASPEED PWM/Fan tachJaghathiswari Rankappagounder Natarajan
The ASPEED AST2400/2500 PWM controller supports 8 PWM output ports. The ASPEED AST2400/2500 Fan tach controller supports 16 tachometer inputs. The device driver matches on the device tree node. The configuration values are read from the device tree and written to the respective registers. The driver provides a sysfs entries through which the user can configure the duty-cycle value (ranging from 0 to 100 percent) and read the fan tach rpm value. Signed-off-by: Jaghathiswari Rankappagounder Natarajan <jaghu@google.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-04-02hwmon: (lm87) Allow channel data to be set from dts fileMahoda Ratnayaka
Currently there is no method for setting the channel value from the DTS file. When, the driver uses a dts file to initialize the driver platform_data is not set. As a result channel variable may not be set correctly. Without the channel variable set correctly, some of the sensors will not be initialized correctly. For example temp3 sensor sysfs entries. This implements the schema agreed with the device tree binding document. Signed-off-by: Mahoda Ratnayaka <mahoda.ratnayaka@alliedtelesis.co.nz> Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-04-02hwmon: (ads7828) Accept optional parameters from device treeSam Povilus
Adding the ability for the ads7828 and ads7830 to use device tree to get optional parameters instead of using platform devices. This allows people using custom boards to also use the ads7828 in a non-default manner. Signed-off-by: Sam Povilus <kernel.development@povil.us> [groeck: Fixed whitespace errors in ads7828.txt] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-04-02hwmon: (dell-smm) Add Dell XPS 15 9560 into DMI listPali Rohár
It was reported that dell-smm-hwmon is working fine on Dell XPS 15 9560. Link: http://www.spinics.net/lists/platform-driver-x86/msg10751.html Reported-by: Vasile Dumitrescu <vasile.dumitrescu@undeva.eu> Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-04-02hwmon: Constify str parameter of hwmon_ops->read_stringJean Delvare
The read_string callback is supposed to retrieve a pointer to a constant string. Signed-off-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-04-02hwmon: (tmp421) Add OF device ID tableJavier Martinez Canillas
The driver doesn't have a struct of_device_id table but supported devices are registered via Device Trees. This is working on the assumption that a I2C device registered via OF will always match a legacy I2C device ID and that the MODALIAS reported will always be of the form i2c:<device>. But this could change in the future so the correct approach is to have an OF device ID table if the devices are registered via OF. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-04-02hwmon: (tmp103) Add OF device ID tableJavier Martinez Canillas
The driver doesn't have a struct of_device_id table but supported devices are registered via Device Trees. This is working on the assumption that a I2C device registered via OF will always match a legacy I2C device ID and that the MODALIAS reported will always be of the form i2c:<device>. But this could change in the future so the correct approach is to have an OF device ID table if the devices are registered via OF. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-04-02hwmon: (tmp102) Add OF device ID tableJavier Martinez Canillas
The driver doesn't have a struct of_device_id table but supported devices are registered via Device Trees. This is working on the assumption that a I2C device registered via OF will always match a legacy I2C device ID and that the MODALIAS reported will always be of the form i2c:<device>. But this could change in the future so the correct approach is to have an OF device ID table if the devices are registered via OF. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-04-02hwmon: (stts751) Add OF device ID tableJavier Martinez Canillas
The driver doesn't have a struct of_device_id table but supported devices are registered via Device Trees. This is working on the assumption that a I2C device registered via OF will always match a legacy I2C device ID and that the MODALIAS reported will always be of the form i2c:<device>. But this could change in the future so the correct approach is to have an OF device ID table if the devices are registered via OF. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-04-02hwmon: (ucd9200) Add OF device ID tableJavier Martinez Canillas
The driver doesn't have a struct of_device_id table but supported devices are registered via Device Trees. This is working on the assumption that a I2C device registered via OF will always match a legacy I2C device ID and that the MODALIAS reported will always be of the form i2c:<device>. But this could change in the future so the correct approach is to have an OF device ID table if the devices are registered via OF. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-04-02hwmon: (ucd9000) Add OF device ID tableJavier Martinez Canillas
The driver doesn't have a struct of_device_id table but supported devices are registered via Device Trees. This is working on the assumption that a I2C device registered via OF will always match a legacy I2C device ID and that the MODALIAS reported will always be of the form i2c:<device>. But this could change in the future so the correct approach is to have an OF device ID table if the devices are registered via OF. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-04-02hwmon: (max6697) Add OF device ID tableJavier Martinez Canillas
The driver doesn't have a struct of_device_id table but supported devices are registered via Device Trees. This is working on the assumption that a I2C device registered via OF will always match a legacy I2C device ID and that the MODALIAS reported will always be of the form i2c:<device>. But this could change in the future so the correct approach is to have an OF device ID table if the devices are registered via OF. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-04-02hwmon: (lm95245) Add OF device ID tableJavier Martinez Canillas
The driver doesn't have a struct of_device_id table but supported devices are registered via Device Trees. This is working on the assumption that a I2C device registered via OF will always match a legacy I2C device ID and that the MODALIAS reported will always be of the form i2c:<device>. But this could change in the future so the correct approach is to have an OF device ID table if the devices are registered via OF. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-04-02hwmon: (lm90) Add OF device ID tableJavier Martinez Canillas
The driver doesn't have a struct of_device_id table but supported devices are registered via Device Trees. This is working on the assumption that a I2C device registered via OF will always match a legacy I2C device ID and that the MODALIAS reported will always be of the form i2c:<device>. But this could change in the future so the correct approach is to have an OF device ID table if the devices are registered via OF. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-04-02hwmon: (lm85) Add OF device ID tableJavier Martinez Canillas
The driver doesn't have a struct of_device_id table but supported devices are registered via Device Trees. This is working on the assumption that a I2C device registered via OF will always match a legacy I2C device ID and that the MODALIAS reported will always be of the form i2c:<device>. But this could change in the future so the correct approach is to have an OF device ID table if the devices are registered via OF. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-04-02hwmon: (lm75) Add OF device ID tableJavier Martinez Canillas
The driver doesn't have a struct of_device_id table but supported devices are registered via Device Trees. This is working on the assumption that a I2C device registered via OF will always match a legacy I2C device ID and that the MODALIAS reported will always be of the form i2c:<device>. But this could change in the future so the correct approach is to have an OF device ID table if the devices are registered via OF. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-04-02hwmon: (lm63) Add OF device ID tableJavier Martinez Canillas
The driver doesn't have a struct of_device_id table but supported devices are registered via Device Trees. This is working on the assumption that a I2C device registered via OF will always match a legacy I2C device ID and that the MODALIAS reported will always be of the form i2c:<device>. But this could change in the future so the correct approach is to have an OF device ID table if the devices are registered via OF. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>