| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the "big" set of USB and Thunderbolt driver changes for
5.18-rc1. For the most part it's been a quiet development cycle for
the USB core, but there are the usual "hot spots" of development
activity.
Included in here are:
- Thunderbolt driver updates:
- fixes for devices without displayport adapters
- lane bonding support and improvements
- other minor changes based on device testing
- dwc3 gadget driver changes.
It seems this driver will never be finished given that the IP core
is showing up in zillions of new devices and each implementation
decides to do something different with it...
- uvc gadget driver updates as more devices start to use and rely on
this hardware as well
- usb_maxpacket() api changes to remove an unneeded and unused
parameter.
- usb-serial driver device id updates and small cleanups
- typec cleanups and fixes based on device testing
- device tree updates for usb properties
- lots of other small fixes and driver updates.
All of these have been in linux-next for weeks with no reported
problems"
* tag 'usb-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (154 commits)
USB: new quirk for Dell Gen 2 devices
usb: dwc3: core: Add error log when core soft reset failed
usb: dwc3: gadget: Move null pinter check to proper place
usb: hub: Simplify error and success path in port_over_current_notify
usb: cdns3: allocate TX FIFO size according to composite EP number
usb: dwc3: Fix ep0 handling when getting reset while doing control transfer
usb: Probe EHCI, OHCI controllers asynchronously
usb: isp1760: Fix out-of-bounds array access
xhci: Don't defer primary roothub registration if there is only one roothub
USB: serial: option: add Quectel BG95 modem
USB: serial: pl2303: fix type detection for odd device
xhci: Allow host runtime PM as default for Intel Alder Lake N xHCI
xhci: Remove quirk for over 10 year old evaluation hardware
xhci: prevent U2 link power state if Intel tier policy prevented U1
xhci: use generic command timer for stop endpoint commands.
usb: host: xhci-plat: omit shared hcd if either root hub has no ports
usb: host: xhci-plat: prepare operation w/o shared hcd
usb: host: xhci-plat: create shared hcd after having added main hcd
xhci: prepare for operation w/o shared hcd
xhci: factor out parts of xhci_gen_setup()
...
|
|
In stk_camera_read_reg() a single byte buffer is alloc-ed and
freed on every function call. Since the size is known,
move the buffer to the struct stk_camera where it will be alloc-ed
and freed once.
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Syzbot reported that -1 is used as array index. The problem was in
missing validation check.
hdw->unit_number is initialized with -1 and then if init table walk fails
this value remains unchanged. Since code blindly uses this member for
array indexing adding sanity check is the easiest fix for that.
hdw->workpoll initialization moved upper to prevent warning in
__flush_work.
Reported-and-tested-by: syzbot+1a247e36149ffd709a9b@syzkaller.appspotmail.com
Fixes: d855497edbfb ("V4L/DVB (4228a): pvrusb2 to kernel 2.6.18")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Don't populate the read-only array table on the stack but
instead make it static const. Also makes the object code a little
smaller.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
This patch aims to add UVC_GUID_FORMAT_H265
High Efficiency Video Coding (HEVC), also known as H.265 and MPEG-H Part 2.
They describe the same video encoding method.
So for handling their behavior is the same.
However, when external camera device describes this encoding method,
some use hevc, some use h265.
There is no uniform specification to describe this encoding method.
So if an external camera device use h265 to describe this encoding method,
driver will not recognize it.
Therefore, this patch is to enable driver to read HEVC/H265
and convert it to V4L2_PIX_FMT_HEVC.
Signed-off-by: James_Lin <Ping-lei.Lin@mediatek.com>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Replace manual decoding of psize in uvc_parse_streaming(), with the code
from uvc_endpoint_max_bpi(). It also handles usb3 devices.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The case USB_SPEED_WIRELESS and the default one were doing the same.
Also, make always use of usb_endpoint_maxp_mult, as it should have a
sane value, even for LOW speed and WIRELESS.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Move all the life cycle of the name to add_mapping. This simplifies
the error handling inside uvc_ioctl_ctrl_map and solves a memory leak
when kemmdup fails.
Also make sure that for custom controls, the user provides a valid name.
Fixes: 07adedb5c606 ("media: uvcvideo: Use control names from framework")
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
probe->dwMaxPayloadTransferSize is a 32bit value, but bandwidth is 16bit. This
may lead to a bit overflow.
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The list iterator will point to a bogus position containing HEAD if
the list is empty or the element is not found in list. This case
should be checked before any use of the iterator, otherwise it will
lead to a invalid memory access. The missing check here is before
"pin = iterm->id;", just add check here to fix the security bug.
In addition, the list iterator value will *always* be set and non-NULL
by list_for_each_entry(), so it is incorrect to assume that the iterator
value will be NULL if the element is not found in list, considering
the (mis)use here: "if (iterm == NULL".
Use a new value 'it' as the list iterator, while use the old value
'iterm' as a dedicated pointer to point to the found element, which
1. can fix this bug, due to 'iterm' is NULL only if it's not found.
2. do not need to change all the uses of 'iterm' after the loop.
3. can also limit the scope of the list iterator 'it' *only inside*
the traversal loop by simply declaring 'it' inside the loop in the
future, as usage of the iterator outside of the list_for_each_entry
is considered harmful. https://lkml.org/lkml/2022/2/17/1032
Fixes: d5e90b7a6cd1c ("[media] uvcvideo: Move to video_ioctl2")
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
As discussed with other developers, the linux-uvc-devel mailing list is
not very useful anymore, and it's better to send people to the general
linux-media mailing list.
Replace/remove the old mailing list address in uvcvideo.rst and
MAINTAINERS.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The third argument of usb_maxpacket(): in_out has been deprecated
because it could be derived from the second argument (e.g. using
usb_pipeout(pipe)).
N.B. function usb_maxpacket() was made variadic to accommodate the
transition from the old prototype with three arguments to the new one
with only two arguments (so that no renaming is needed). The variadic
argument is to be removed once all users of usb_maxpacket() get
migrated.
CC: Sean Young <sean@mess.org>
CC: Mauro Carvalho Chehab <mchehab@kernel.org>
CC: Benjamin Valentin <benpicco@googlemail.com>
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/r/20220317035514.6378-5-mailhol.vincent@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The device number is currently a value that needs to be the same
on two separate tables, but the code doesn't actually enforce it,
leading to errors as boards get added or removed.
Fix it by using an enum.
Link: https://lore.kernel.org/linux-media/028699ec71158dbc49d710a4259eb8cdb7f673cb.1648499509.git.mchehab@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The device number is currently a value that needs to be the same
on two separate tables, but the code doesn't actually enforce it,
leading to errors as boards get added or removed.
Fix it by using an enum.
Link: https://lore.kernel.org/linux-media/f1d4fa4960b709152ae693800c830e19a4bc1f48.1648499509.git.mchehab@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The device number is currently a value that needs to be the same
on two separate tables, but the code doesn't actually enforce it,
leading to errors as boards get added or removed.
Fix it by using an enum.
Link: https://lore.kernel.org/linux-media/a300c26ad4e9bb913e86eeaf0ec7d72b9e7d5d3e.1648499509.git.mchehab@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The device number is currently a value that needs to be the same
on two separate tables, but the code doesn't actually enforce it,
leading to errors as boards get added or removed.
Fix it by using an enum.
Link: https://lore.kernel.org/linux-media/0241bf842bf592dfa01b0ef4916afda396194f98.1648499509.git.mchehab@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The device number is currently a value that needs to be the same
on two separate tables, but the code doesn't actually enforce it,
leading to errors as boards get added or removed.
Fix it by using an enum.
Link: https://lore.kernel.org/linux-media/13bf6aab3909fae5da4c9a24c114b15e76abd146.1648499509.git.mchehab@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The device number is currently a value that needs to be the same
on two separate tables, but the code doesn't actually enforce it,
leading to errors as boards get added or removed.
Fix it by using an enum.
Link: https://lore.kernel.org/linux-media/5fd3c469faa115856f48037019e607edcb41d458.1648499509.git.mchehab@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The device number is currently a value that needs to be the same
on two separate tables, but the code doesn't actually enforce it,
leading to errors as boards get added or removed.
Fix it by using an enum.
Link: https://lore.kernel.org/linux-media/b447d9fd3832da5eff6267e8fe742c431f1133f2.1648499509.git.mchehab@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
In order to make the drivers under dvb-usb more homogeneous,
use the new macro.
Link: https://lore.kernel.org/linux-media/c125c28aeb3d4344b632e1f99d81c433917f2a4c.1648499509.git.mchehab@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The device number is currently a value that needs to be the same
on two separate tables, but the code doesn't actually enforce it,
leading to errors as boards get added or removed.
Fix it by using an enum.
Link: https://lore.kernel.org/linux-media/283a8c6bdf9778f832b4f6acc104c06688281668.1648499509.git.mchehab@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The device number is currently a value that needs to be the same
on two separate tables, but the code doesn't actually enforce it,
leading to errors as boards get added or removed.
Fix it by using an enum.
Link: https://lore.kernel.org/linux-media/08861d80b6706ac1ed04a68959ebb78f27cb028d.1648499509.git.mchehab@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The device number is currently a value that needs to be the same
on two separate tables, but the code doesn't actually enforce it,
leading to errors as boards get added or removed.
Fix it by using an enum.
Link: https://lore.kernel.org/linux-media/58f1a356b7b75bbefef3aa07cd99896c446df32f.1648499509.git.mchehab@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The device number is currently a value that needs to be the same
on two separate tables, but the code doesn't actually enforce it,
leading to errors as boards get added or removed.
Fix it by using an enum.
Link: https://lore.kernel.org/linux-media/c6f6bab97c39561add54f69a75980f4d453f7c17.1648499509.git.mchehab@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The device number is currently a value that needs to be the same
on two separate tables, but the code doesn't actually enforce it,
leading to errors as boards get added or removed.
Fix it by using an enum.
Link: https://lore.kernel.org/linux-media/0d32148747df677f0c930605389c12b190c09bdf.1648499509.git.mchehab@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
In order to make the drivers under dvb-usb more homogeneous,
use the new macro, and rename some PIDs.
Link: https://lore.kernel.org/linux-media/828998ef3f0843bab4e84780e42f8f0802f57be7.1648499509.git.mchehab@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
In order to make the drivers under dvb-usb more homogeneous,
use the new macro.
Link: https://lore.kernel.org/linux-media/6e7183735aacf33fff86bc709a38aafb6b858dff.1648499509.git.mchehab@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The device number is currently a value that needs to be the same
on two separate tables, but the code doesn't actually enforce it,
leading to errors as boards get added or removed.
Fix it by using an enum.
Link: https://lore.kernel.org/linux-media/9fa3d1add4c58e1320dcc18578fda2d0106becda.1648499509.git.mchehab@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
In order to make the drivers under dvb-usb more homogeneous,
use the new macro.
Link: https://lore.kernel.org/linux-media/68de8820a361e61c25bf7402acac71b3770ff906.1648499509.git.mchehab@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
In order to make the drivers under dvb-usb more homogeneous,
use the new macro.
Link: https://lore.kernel.org/linux-media/bd1e61664e234252de3dfac16aab8bfc35b7bcd7.1648499509.git.mchehab@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
In order to make the drivers under dvb-usb more homogeneous,
use the new macro and an enum with the USB model supported by
this driver.
Link: https://lore.kernel.org/linux-media/4b8212adab277a2bf84ab04480eb6fd37edda74f.1648499509.git.mchehab@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The device number is currently a value that needs to be the same
on two separate tables, but the code doesn't actually enforce it,
leading to errors as boards get added or removed.
Fix it by using an enum.
Link: https://lore.kernel.org/linux-media/65b9775c39dcd21e5cb75a86e1e7b99b7d6eefcd.1648499509.git.mchehab@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
In order to make the drivers under dvb-usb more homogeneous,
use the new macro.
Link: https://lore.kernel.org/linux-media/9b1749763465815af92f0a4d8f210fe170c549d5.1648499509.git.mchehab@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
The device number is currently a value that needs to be the same
on two separate tables, but the code doesn't actually enforce it,
leading to errors as boards get added or removed.
Fix it by using an enum.
Link: https://lore.kernel.org/linux-media/dc8f9ec6cc8f2e16967a61752a292c46622c01dc.1648499509.git.mchehab@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
There are two commented entries that are pointing to the wrong
places. Fix them.
Link: https://lore.kernel.org/linux-media/fe9ee24510431e6baad5244d8a27e56ce167fc36.1648499509.git.mchehab@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Almost all drivers based on dvb-usb place their USB IDs
at dvb-usb-ids.h. In order to make it more standard, place
the remaining ones also there.
Link: https://lore.kernel.org/linux-media/7b32d5383169d23082758a7b69edef2f099202f3.1648499509.git.mchehab@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Currently, the idems inside media Kconfig are out of order.
Sort them using the script below:
<script>
use strict;
use warnings;
my %config;
my @source;
my $out;
sub flush_config()
{
if (scalar %config) {
for my $c (sort keys %config) {
$out .= $config{$c} . "\n";
}
%config = ();
}
return if (!scalar @source);
$out .= "\n";
for my $s (sort @source) {
$out .= $s;
}
$out .= "\n";
@source = ();
}
sub sort_kconfig($)
{
my $fname = shift;
my $cur_config = "";
@source = ();
$out = "";
%config = ();
open IN, $fname or die;
while (<IN>) {
if (m/^config\s+(.*)/) {
$cur_config = $1;
$config{$cur_config} .= $_;
} elsif (m/^source\s+(.*)/) {
push @source, $_;
} elsif (m/^\s+/) {
if ($cur_config eq "") {
$out .= $_;
} else {
$config{$cur_config} .= $_;
}
} else {
flush_config();
$cur_config = "";
$out .= $_;
}
}
close IN or die;
flush_config();
$out =~ s/\n\n+/\n\n/g;
$out =~ s/\n+$/\n/;
open OUT, ">$fname";
print OUT $out;
close OUT;
}
for my $fname(@ARGV) {
sort_kconfig $fname
}
</script>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
media Kconfig has two entries associated to V4L API:
VIDEO_DEV and VIDEO_V4L2.
On Kernel 2.6.x, there were two V4L APIs, each one with its own flag.
VIDEO_DEV were meant to:
1) enable Video4Linux and make its Kconfig options to appear;
2) it makes the Kernel build the V4L core.
while VIDEO_V4L2 where used to distinguish between drivers that
implement the newer API and drivers that implemented the former one.
With time, such meaning changed, specially after the removal of
all V4L version 1 drivers.
At the current implementation, VIDEO_DEV only does (1): it enables
the media options related to V4L, that now has:
menu "Video4Linux options"
visible if VIDEO_DEV
source "drivers/media/v4l2-core/Kconfig"
endmenu
but it doesn't affect anymore the V4L core drivers.
The rationale is that the V4L2 core has a "soft" dependency
at the I2C bus, and now requires to select a number of other
Kconfig options:
config VIDEO_V4L2
tristate
depends on (I2C || I2C=n) && VIDEO_DEV
select RATIONAL
select VIDEOBUF2_V4L2 if VIDEOBUF2_CORE
default (I2C || I2C=n) && VIDEO_DEV
In the past, merging them would be tricky, but it seems that it is now
possible to merge those symbols, in order to simplify V4L dependencies.
Let's keep VIDEO_DEV, as this one is used on some make *defconfig
configurations.
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> # for meson-vdec & meson-ge2d
Acked-by: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com>
Acked-by: Łukasz Stelmach <l.stelmach@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Alphabetically sort entries at the Makefiles per group,
in ASCII order, e. g., using the output of:
$ LC_ALL=C sort Makefile |grep obj-y
...
$ LC_ALL=C sort Makefile |grep obj.*CONFIG
...
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
It is hard to keep all those options aligned as newer config
changes get added, and we really don't want to have patches adding
new options also touching already existing entries.
So, drop the extra spaces.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
This is the only tuner driver that has "tuner-" on its name.
Rename it, in order to match all the other tuner drivers.
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Tag branch
* tag 'br-v5.18l' of git://linuxtv.org/hverkuil/media_tree: (39 commits)
media: imx-jpeg: Set V4L2_BUF_FLAG_LAST at eos
media: meson-ir-tx: remove incorrect doc comment
media: vivid: use time_is_after_jiffies() instead of open coding it
media: wl128x: use time_is_before_jiffies() instead of open coding it
media: tda8083: use time_is_after_jiffies() instead of open coding it
media: stv0299: use time_is_before_jiffies() instead of open coding it
media: si21xx: use time_is_before_jiffies() instead of open coding it
media: cedrus: h264: Fix neighbour info buffer size
media: cx88-mpeg: clear interrupt status register before streaming video
media: cedrus: H265: Fix neighbour info buffer size
media: fsl-viu: use GFP_KERNEL
media: cx18: use GFP_KERNEL
drivers: meson: vdec: add VP9 support to GXM
stkwebcam: add new Asus laptop to upside_down table
media: imx-jpeg: fix a bug of accessing array out of bounds
media: sun6i-csi: fix colorspace in sun6i_video_try_fmt()
media: usb: go7007: s2250-board: fix leak in probe()
media: cedrus: Add watchdog for job completion
pixfmt-yuv-planar.rst: fix typo: 'Cr, Cr' -> 'Cr, Cb'
media: imx-jpeg: Remove unnecessary print function dev_err()
...
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
hdpvr_register_videodev is responsible to initialize a worker in
hdpvr_device. However, the worker is only initialized at
hdpvr_start_streaming other than hdpvr_register_videodev.
When hdpvr_probe does not initialize its worker, the hdpvr_disconnect
will encounter one WARN in flush_work.The stack trace is as follows:
hdpvr_disconnect+0xb8/0xf2 drivers/media/usb/hdpvr/hdpvr-core.c:425
usb_unbind_interface+0xbf/0x3a0 drivers/usb/core/driver.c:458
__device_release_driver drivers/base/dd.c:1206 [inline]
device_release_driver_internal+0x22a/0x230 drivers/base/dd.c:1237
bus_remove_device+0x108/0x160 drivers/base/bus.c:529
device_del+0x1fe/0x510 drivers/base/core.c:3592
usb_disable_device+0xd1/0x1d0 drivers/usb/core/message.c:1419
usb_disconnect+0x109/0x330 drivers/usb/core/hub.c:2228
Fix this by moving the initialization of dev->worker to the starting of
hdpvr_register_videodev
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Replace the urb buffers allocation to use the noncontiguous API.
This improves performance on ARM platforms where DMA coherent allocations
produce uncached mappings. Note that the noncontiguous API
requires the driver to handle synchronization.
This commit is similar to this one for the uvc driver:
https://lkml.org/lkml/2021/3/12/1506
Performance tests on rock-pi4 (Arm64) shows about 15x
improvements:
== DMA NONCONTIGUOUS ==
total durations: 20.63678480 sec
urb processing durations: 0.286864889 sec
uS/qty: 286864/2508 avg: 114.379 min: 0.583 max: 155.461 (uS)
FPS: 24.92
lost: 0 done: 500
raw decode speed: 11.603 Gbits/s
bytes 414831228.000
bytes/urb: 165403
== DMA COHERENT ==
total durations: 20.73551767 sec
urb processing durations: 4.541559160 sec
uS/qty: 4541559/2509 avg: 1810.107 min: 0.583 max: 2113.163 (uS)
FPS: 24.90
lost: 0 done: 500
raw decode speed: 730.738 Mbits/s
bytes 414785444.000
bytes/urb: 165319
Performance tests on x86 laptop show no significant
difference:
== DMA NONCONTIGUOUS ==
total durations: 20.220590102 sec
urb processing durations: 0.63021818 sec
uS/qty: 63021/2512 avg: 25.088 min: 0.138 max: 146.750 (uS)
FPS: 24.72
lost: 0 done: 500
raw decode speed: 52.751 Gbits/s
bytes 415421032.000
bytes/urb: 165374
== DMA COHERENT ==
total durations: 20.220475614 sec
urb processing durations: 0.64751972 sec
uS/qty: 64751/2512 avg: 25.777 min: 0.168 max: 132.250 (uS)
FPS: 24.72
lost: 0 done: 500
raw decode speed: 51.927 Gbits/s
bytes 415422794.000
bytes/urb: 165375
[hverkuil: incorporated Ezequiel's suggestions from his review]
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Instead of having two separated arrays, one for the urbs and
one for their buffers, have one array of a struct containing both.
In addition, the array is just 16 pointers, no need to dynamically
allocate it.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
If the callback 'start_streaming' fails, then all
queued buffers in the driver should be returned with
state 'VB2_BUF_STATE_QUEUED'. Currently, they are
returned with 'VB2_BUF_STATE_ERROR' which is wrong.
Fix this. This also fixes the warning:
[ 65.583633] WARNING: CPU: 5 PID: 593 at drivers/media/common/videobuf2/videobuf2-core.c:1612 vb2_start_streaming+0xd4/0x160 [videobuf2_common]
[ 65.585027] Modules linked in: snd_usb_audio snd_hwdep snd_usbmidi_lib snd_rawmidi snd_soc_hdmi_codec dw_hdmi_i2s_audio saa7115 stk1160 videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_common videodev mc crct10dif_ce panfrost snd_soc_simple_card snd_soc_audio_graph_card snd_soc_spdif_tx snd_soc_simple_card_utils gpu_sched phy_rockchip_pcie snd_soc_rockchip_i2s rockchipdrm analogix_dp dw_mipi_dsi dw_hdmi cec drm_kms_helper drm rtc_rk808 rockchip_saradc industrialio_triggered_buffer kfifo_buf rockchip_thermal pcie_rockchip_host ip_tables x_tables ipv6
[ 65.589383] CPU: 5 PID: 593 Comm: v4l2src0:src Tainted: G W 5.16.0-rc4-62408-g32447129cb30-dirty #14
[ 65.590293] Hardware name: Radxa ROCK Pi 4B (DT)
[ 65.590696] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 65.591304] pc : vb2_start_streaming+0xd4/0x160 [videobuf2_common]
[ 65.591850] lr : vb2_start_streaming+0x6c/0x160 [videobuf2_common]
[ 65.592395] sp : ffff800012bc3ad0
[ 65.592685] x29: ffff800012bc3ad0 x28: 0000000000000000 x27: ffff800012bc3cd8
[ 65.593312] x26: 0000000000000000 x25: ffff00000d8a7800 x24: 0000000040045612
[ 65.593938] x23: ffff800011323000 x22: ffff800012bc3cd8 x21: ffff00000908a8b0
[ 65.594562] x20: ffff00000908a8c8 x19: 00000000fffffff4 x18: ffffffffffffffff
[ 65.595188] x17: 000000040044ffff x16: 00400034b5503510 x15: ffff800011323f78
[ 65.595813] x14: ffff000013163886 x13: ffff000013163885 x12: 00000000000002ce
[ 65.596439] x11: 0000000000000028 x10: 0000000000000001 x9 : 0000000000000228
[ 65.597064] x8 : 0101010101010101 x7 : 7f7f7f7f7f7f7f7f x6 : fefefeff726c5e78
[ 65.597690] x5 : ffff800012bc3990 x4 : 0000000000000000 x3 : ffff000009a34880
[ 65.598315] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff000007cd99f0
[ 65.598940] Call trace:
[ 65.599155] vb2_start_streaming+0xd4/0x160 [videobuf2_common]
[ 65.599672] vb2_core_streamon+0x17c/0x1a8 [videobuf2_common]
[ 65.600179] vb2_streamon+0x54/0x88 [videobuf2_v4l2]
[ 65.600619] vb2_ioctl_streamon+0x54/0x60 [videobuf2_v4l2]
[ 65.601103] v4l_streamon+0x3c/0x50 [videodev]
[ 65.601521] __video_do_ioctl+0x1a4/0x428 [videodev]
[ 65.601977] video_usercopy+0x320/0x828 [videodev]
[ 65.602419] video_ioctl2+0x3c/0x58 [videodev]
[ 65.602830] v4l2_ioctl+0x60/0x90 [videodev]
[ 65.603227] __arm64_sys_ioctl+0xa8/0xe0
[ 65.603576] invoke_syscall+0x54/0x118
[ 65.603911] el0_svc_common.constprop.3+0x84/0x100
[ 65.604332] do_el0_svc+0x34/0xa0
[ 65.604625] el0_svc+0x1c/0x50
[ 65.604897] el0t_64_sync_handler+0x88/0xb0
[ 65.605264] el0t_64_sync+0x16c/0x170
[ 65.605587] ---[ end trace 578e0ba07742170d ]---
Fixes: 8ac456495a33d ("[media] stk1160: Stop device and unqueue buffers when start_streaming() fails")
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
In case we fail to allocate a transfer_buffer then we
break the buffers creation loop and update the number of
buffers to the number of successfully allocated which should
be 'i' and not 'i - 1' nor 'i + 1'
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
This reverts commit 2c98b8a3458df03abdc6945bbef67ef91d181938.
Reverted patch causes problems with Hauppauge WinTV dualHD as Maximilian
reported [1]. Since quick solution didn't come up let's just revert it
to make this device work with upstream kernels.
Link: https://lore.kernel.org/all/6a72a37b-e972-187d-0322-16336e12bdc5@elbmurf.de/ [1]
Reported-by: Maximilian Böhm <maximilian.boehm@elbmurf.de>
Tested-by: Maximilian Böhm <maximilian.boehm@elbmurf.de>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Handle 0x0001, DMI type 1, 27 bytes
System Information
Manufacturer: ASUSTeK Computer Inc.
Product Name: A6JC
Version: 1.0
Serial Number: XXXXXXXXXXXXXXXXX
UUID: XXXXXXXXXXXXXXXXX
Wake-up Type: Power Switch
SKU Number: To Be Filled By O.E.M.
Family: To Be Filled By O.E.M.
Handle 0x0002, DMI type 2, 15 bytes
Base Board Information
Manufacturer: ASUSTeK Computer Inc.
Product Name: A6JC
Version: 1.0
Serial Number: XXXXXXXXXXXXXXXXX
Asset Tag: To Be Filled By O.E.M.
Features:
Board is a hosting board
Board is replaceable
Location In Chassis: To Be Filled By O.E.M.
Chassis Handle: 0x0003
Type: Motherboard
Contained Object Handles: 0
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: MEDIA ML <linux-media@vger.kernel.org>
Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Call i2c_unregister_device(audio) on this error path.
Fixes: d3b2ccd9e307 ("[media] s2250: convert to the control framework")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
