summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/rdc
AgeCommit message (Collapse)Author
2016-12-17r6040: move spinlock in r6040_close as SOFTIRQ-unsafe lock order detectedManuel Bessler
'ifconfig eth0 down' makes r6040_close() trigger: INFO: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected Fixed by moving calls to phy_stop(), napi_disable(), netif_stop_queue() to outside of the module's private spin_lock_irq block. Found on a Versalogic Tomcat SBC with a Vortex86 SoC s1660e_5150:~# sudo ifconfig eth0 down [ 61.306415] ====================================================== [ 61.306415] [ INFO: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected ] [ 61.306415] 4.9.0-gb898d2d-manuel #1 Not tainted [ 61.306415] ------------------------------------------------------ [ 61.306415] ifconfig/449 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire: [ 61.306415] (&dev->lock){+.+...}, at: [<c1336276>] phy_stop+0x16/0x80 [ 61.306415] and this task is already holding: [ 61.306415] (&(&lp->lock)->rlock){+.-...}, at: [<d0934c84>] r6040_close+0x24/0x230 [r6040] which would create a new lock dependency: [ 61.306415] (&(&lp->lock)->rlock){+.-...} -> (&dev->lock){+.+...} [ 61.306415] but this new dependency connects a SOFTIRQ-irq-safe lock: [ 61.306415] (&(&lp->lock)->rlock){+.-...} [ 61.306415] ... which became SOFTIRQ-irq-safe at: [ 61.306415] [ 61.306415] [<c1075bc5>] __lock_acquire+0x555/0x1770 [ 61.306415] [ 61.306415] [<c107717c>] lock_acquire+0x7c/0x150 [ 61.306415] [ 61.306415] [<c14bb334>] _raw_spin_lock_irqsave+0x24/0x40 [ 61.306415] [ 61.306415] [<d0934ac0>] r6040_start_xmit+0x30/0x1d0 [r6040] [ 61.306415] [ 61.306415] [<c13a7d4d>] dev_hard_start_xmit+0x9d/0x2d0 [ 61.306415] [ 61.306415] [<c13c8a38>] sch_direct_xmit+0xa8/0x140 [ 61.306415] [ 61.306415] [<c13a8436>] __dev_queue_xmit+0x416/0x780 [ 61.306415] [ 61.306415] [<c13a87aa>] dev_queue_xmit+0xa/0x10 [ 61.306415] [ 61.306415] [<c13b4837>] neigh_resolve_output+0x147/0x220 [ 61.306415] [ 61.306415] [<c144541b>] ip6_finish_output2+0x2fb/0x910 [ 61.306415] [ 61.306415] [<c14494e6>] ip6_finish_output+0xa6/0x1a0 [ 61.306415] [ 61.306415] [<c1449635>] ip6_output+0x55/0x320 [ 61.306415] [ 61.306415] [<c146f4d2>] mld_sendpack+0x352/0x560 [ 61.306415] [ 61.306415] [<c146fe55>] mld_ifc_timer_expire+0x155/0x280 [ 61.306415] [ 61.306415] [<c108b081>] call_timer_fn+0x81/0x270 [ 61.306415] [ 61.306415] [<c108b331>] expire_timers+0xc1/0x180 [ 61.306415] [ 61.306415] [<c108b4f7>] run_timer_softirq+0x77/0x150 [ 61.306415] [ 61.306415] [<c1043d04>] __do_softirq+0xb4/0x3d0 [ 61.306415] [ 61.306415] [<c101a15c>] do_softirq_own_stack+0x1c/0x30 [ 61.306415] [ 61.306415] [<c104416e>] irq_exit+0x8e/0xa0 [ 61.306415] [ 61.306415] [<c1019d31>] do_IRQ+0x51/0x100 [ 61.306415] [ 61.306415] [<c14bc176>] common_interrupt+0x36/0x40 [ 61.306415] [ 61.306415] [<c1134928>] set_root+0x68/0xf0 [ 61.306415] [ 61.306415] [<c1136120>] path_init+0x400/0x640 [ 61.306415] [ 61.306415] [<c11386bf>] path_lookupat+0xf/0xe0 [ 61.306415] [ 61.306415] [<c1139ebc>] filename_lookup+0x6c/0x100 [ 61.306415] [ 61.306415] [<c1139fd5>] user_path_at_empty+0x25/0x30 [ 61.306415] [ 61.306415] [<c11298c6>] SyS_faccessat+0x86/0x1e0 [ 61.306415] [ 61.306415] [<c1129a30>] SyS_access+0x10/0x20 [ 61.306415] [ 61.306415] [<c100179f>] do_int80_syscall_32+0x3f/0x110 [ 61.306415] [ 61.306415] [<c14bba3f>] restore_all+0x0/0x61 [ 61.306415] [ 61.306415] to a SOFTIRQ-irq-unsafe lock: [ 61.306415] (&dev->lock){+.+...} [ 61.306415] ... which became SOFTIRQ-irq-unsafe at: [ 61.306415] ...[ 61.306415] [ 61.306415] [<c1075c0c>] __lock_acquire+0x59c/0x1770 [ 61.306415] [ 61.306415] [<c107717c>] lock_acquire+0x7c/0x150 [ 61.306415] [ 61.306415] [<c14b7add>] mutex_lock_nested+0x2d/0x4a0 [ 61.306415] [ 61.306415] [<c133747d>] phy_probe+0x4d/0xc0 [ 61.306415] [ 61.306415] [<c1338afe>] phy_attach_direct+0xbe/0x190 [ 61.306415] [ 61.306415] [<c1338ca7>] phy_connect_direct+0x17/0x60 [ 61.306415] [ 61.306415] [<c1338d23>] phy_connect+0x33/0x70 [ 61.306415] [ 61.306415] [<d09357a0>] r6040_init_one+0x3a0/0x500 [r6040] [ 61.306415] [ 61.306415] [<c12a78c7>] pci_device_probe+0x77/0xd0 [ 61.306415] [ 61.306415] [<c12f5e15>] driver_probe_device+0x145/0x280 [ 61.306415] [ 61.306415] [<c12f5fd9>] __driver_attach+0x89/0x90 [ 61.306415] [ 61.306415] [<c12f43ef>] bus_for_each_dev+0x4f/0x80 [ 61.306415] [ 61.306415] [<c12f5954>] driver_attach+0x14/0x20 [ 61.306415] [ 61.306415] [<c12f55b7>] bus_add_driver+0x197/0x210 [ 61.306415] [ 61.306415] [<c12f6a21>] driver_register+0x51/0xd0 [ 61.306415] [ 61.306415] [<c12a6955>] __pci_register_driver+0x45/0x50 [ 61.306415] [ 61.306415] [<d0938017>] 0xd0938017 [ 61.306415] [ 61.306415] [<c100043f>] do_one_initcall+0x2f/0x140 [ 61.306415] [ 61.306415] [<c10e48c0>] do_init_module+0x4a/0x19b [ 61.306415] [ 61.306415] [<c10a680e>] load_module+0x1b2e/0x2070 [ 61.306415] [ 61.306415] [<c10a6eb9>] SyS_finit_module+0x69/0x80 [ 61.306415] [ 61.306415] [<c100179f>] do_int80_syscall_32+0x3f/0x110 [ 61.306415] [ 61.306415] [<c14bba3f>] restore_all+0x0/0x61 [ 61.306415] [ 61.306415] other info that might help us debug this: [ 61.306415] [ 61.306415] Possible interrupt unsafe locking scenario: [ 61.306415] [ 61.306415] CPU0 CPU1 [ 61.306415] ---- ---- [ 61.306415] lock(&dev->lock); [ 61.306415] local_irq_disable(); [ 61.306415] lock(&(&lp->lock)->rlock); [ 61.306415] lock(&dev->lock); [ 61.306415] <Interrupt> [ 61.306415] lock(&(&lp->lock)->rlock); [ 61.306415] [ 61.306415] *** DEADLOCK *** [ 61.306415] [ 61.306415] 2 locks held by ifconfig/449: [ 61.306415] #0: (rtnl_mutex){+.+.+.}, at: [<c13b68ef>] rtnl_lock+0xf/0x20 [ 61.306415] #1: (&(&lp->lock)->rlock){+.-...}, at: [<d0934c84>] r6040_close+0x24/0x230 [r6040] [ 61.306415] [ 61.306415] the dependencies between SOFTIRQ-irq-safe lock and the holding lock: [ 61.306415] -> (&(&lp->lock)->rlock){+.-...} ops: 3049 { [ 61.306415] HARDIRQ-ON-W at: [ 61.306415] [ 61.306415] [<c1075be7>] __lock_acquire+0x577/0x1770 [ 61.306415] [ 61.306415] [<c107717c>] lock_acquire+0x7c/0x150 [ 61.306415] [ 61.306415] [<c14bb21b>] _raw_spin_lock+0x1b/0x30 [ 61.306415] [ 61.306415] [<d09343cc>] r6040_poll+0x2c/0x330 [r6040] [ 61.306415] [ 61.306415] [<c13a5577>] net_rx_action+0x197/0x340 [ 61.306415] [ 61.306415] [<c1043d04>] __do_softirq+0xb4/0x3d0 [ 61.306415] [ 61.306415] [<c1044037>] run_ksoftirqd+0x17/0x40 [ 61.306415] [ 61.306415] [<c105fe91>] smpboot_thread_fn+0x141/0x180 [ 61.306415] [ 61.306415] [<c105c84e>] kthread+0xde/0x110 [ 61.306415] [ 61.306415] [<c14bb949>] ret_from_fork+0x19/0x30 [ 61.306415] IN-SOFTIRQ-W at: [ 61.306415] [ 61.306415] [<c1075bc5>] __lock_acquire+0x555/0x1770 [ 61.306415] [ 61.306415] [<c107717c>] lock_acquire+0x7c/0x150 [ 61.306415] [ 61.306415] [<c14bb334>] _raw_spin_lock_irqsave+0x24/0x40 [ 61.306415] [ 61.306415] [<d0934ac0>] r6040_start_xmit+0x30/0x1d0 [r6040] [ 61.306415] [ 61.306415] [<c13a7d4d>] dev_hard_start_xmit+0x9d/0x2d0 [ 61.306415] [ 61.306415] [<c13c8a38>] sch_direct_xmit+0xa8/0x140 [ 61.306415] [ 61.306415] [<c13a8436>] __dev_queue_xmit+0x416/0x780 [ 61.306415] [ 61.306415] [<c13a87aa>] dev_queue_xmit+0xa/0x10 [ 61.306415] [ 61.306415] [<c13b4837>] neigh_resolve_output+0x147/0x220 [ 61.306415] [ 61.306415] [<c144541b>] ip6_finish_output2+0x2fb/0x910 [ 61.306415] [ 61.306415] [<c14494e6>] ip6_finish_output+0xa6/0x1a0 [ 61.306415] [ 61.306415] [<c1449635>] ip6_output+0x55/0x320 [ 61.306415] [ 61.306415] [<c146f4d2>] mld_sendpack+0x352/0x560 [ 61.306415] [ 61.306415] [<c146fe55>] mld_ifc_timer_expire+0x155/0x280 [ 61.306415] [ 61.306415] [<c108b081>] call_timer_fn+0x81/0x270 [ 61.306415] [ 61.306415] [<c108b331>] expire_timers+0xc1/0x180 [ 61.306415] [ 61.306415] [<c108b4f7>] run_timer_softirq+0x77/0x150 [ 61.306415] [ 61.306415] [<c1043d04>] __do_softirq+0xb4/0x3d0 [ 61.306415] [ 61.306415] [<c101a15c>] do_softirq_own_stack+0x1c/0x30 [ 61.306415] [ 61.306415] [<c104416e>] irq_exit+0x8e/0xa0 [ 61.306415] [ 61.306415] [<c1019d31>] do_IRQ+0x51/0x100 [ 61.306415] [ 61.306415] [<c14bc176>] common_interrupt+0x36/0x40 [ 61.306415] [ 61.306415] [<c1134928>] set_root+0x68/0xf0 [ 61.306415] [ 61.306415] [<c1136120>] path_init+0x400/0x640 [ 61.306415] [ 61.306415] [<c11386bf>] path_lookupat+0xf/0xe0 [ 61.306415] [ 61.306415] [<c1139ebc>] filename_lookup+0x6c/0x100 [ 61.306415] [ 61.306415] [<c1139fd5>] user_path_at_empty+0x25/0x30 [ 61.306415] [ 61.306415] [<c11298c6>] SyS_faccessat+0x86/0x1e0 [ 61.306415] [ 61.306415] [<c1129a30>] SyS_access+0x10/0x20 [ 61.306415] [ 61.306415] [<c100179f>] do_int80_syscall_32+0x3f/0x110 [ 61.306415] [ 61.306415] [<c14bba3f>] restore_all+0x0/0x61 [ 61.306415] INITIAL USE at: [ 61.306415] [ 61.306415] [<c107586e>] __lock_acquire+0x1fe/0x1770 [ 61.306415] [ 61.306415] [<c107717c>] lock_acquire+0x7c/0x150 [ 61.306415] [ 61.306415] [<c14bb334>] _raw_spin_lock_irqsave+0x24/0x40 [ 61.306415] [ 61.306415] [<d093474e>] r6040_get_stats+0x1e/0x60 [r6040] [ 61.306415] [ 61.306415] [<c139fb16>] dev_get_stats+0x96/0xc0 [ 61.306415] [ 61.306415] [<c14b416e>] rtnl_fill_stats+0x36/0xfd [ 61.306415] [ 61.306415] [<c13b7b3c>] rtnl_fill_ifinfo+0x47c/0xce0 [ 61.306415] [ 61.306415] [<c13bc08e>] rtmsg_ifinfo_build_skb+0x4e/0xd0 [ 61.306415] [ 61.306415] [<c13bc120>] rtmsg_ifinfo.part.20+0x10/0x40 [ 61.306415] [ 61.306415] [<c13bc16b>] rtmsg_ifinfo+0x1b/0x20 [ 61.306415] [ 61.306415] [<c13a9d19>] register_netdevice+0x409/0x550 [ 61.306415] [ 61.306415] [<c13a9e72>] register_netdev+0x12/0x20 [ 61.306415] [ 61.306415] [<d09357e8>] r6040_init_one+0x3e8/0x500 [r6040] [ 61.306415] [ 61.306415] [<c12a78c7>] pci_device_probe+0x77/0xd0 [ 61.306415] [ 61.306415] [<c12f5e15>] driver_probe_device+0x145/0x280 [ 61.306415] [ 61.306415] [<c12f5fd9>] __driver_attach+0x89/0x90 [ 61.306415] [ 61.306415] [<c12f43ef>] bus_for_each_dev+0x4f/0x80 [ 61.306415] [ 61.306415] [<c12f5954>] driver_attach+0x14/0x20 [ 61.306415] [ 61.306415] [<c12f55b7>] bus_add_driver+0x197/0x210 [ 61.306415] [ 61.306415] [<c12f6a21>] driver_register+0x51/0xd0 [ 61.306415] [ 61.306415] [<c12a6955>] __pci_register_driver+0x45/0x50 [ 61.306415] [ 61.306415] [<d0938017>] 0xd0938017 [ 61.306415] [ 61.306415] [<c100043f>] do_one_initcall+0x2f/0x140 [ 61.306415] [ 61.306415] [<c10e48c0>] do_init_module+0x4a/0x19b [ 61.306415] [ 61.306415] [<c10a680e>] load_module+0x1b2e/0x2070 [ 61.306415] [ 61.306415] [<c10a6eb9>] SyS_finit_module+0x69/0x80 [ 61.306415] [ 61.306415] [<c100179f>] do_int80_syscall_32+0x3f/0x110 [ 61.306415] [ 61.306415] [<c14bba3f>] restore_all+0x0/0x61 [ 61.306415] } [ 61.306415] ... key at: [<d0936280>] __key.45893+0x0/0xfffff739 [r6040] [ 61.306415] ... acquired at: [ 61.306415] [ 61.306415] [<c1074a32>] check_irq_usage+0x42/0xb0 [ 61.306415] [ 61.306415] [<c107677c>] __lock_acquire+0x110c/0x1770 [ 61.306415] [ 61.306415] [<c107717c>] lock_acquire+0x7c/0x150 [ 61.306415] [ 61.306415] [<c14b7add>] mutex_lock_nested+0x2d/0x4a0 [ 61.306415] [ 61.306415] [<c1336276>] phy_stop+0x16/0x80 [ 61.306415] [ 61.306415] [<d0934ce9>] r6040_close+0x89/0x230 [r6040] [ 61.306415] [ 61.306415] [<c13a0a91>] __dev_close_many+0x61/0xa0 [ 61.306415] [ 61.306415] [<c13a0bbf>] __dev_close+0x1f/0x30 [ 61.306415] [ 61.306415] [<c13a9127>] __dev_change_flags+0x87/0x150 [ 61.306415] [ 61.306415] [<c13a9213>] dev_change_flags+0x23/0x60 [ 61.306415] [ 61.306415] [<c1416238>] devinet_ioctl+0x5f8/0x6f0 [ 61.306415] [ 61.306415] [<c1417f75>] inet_ioctl+0x65/0x90 [ 61.306415] [ 61.306415] [<c1389b54>] sock_ioctl+0x124/0x2b0 [ 61.306415] [ 61.306415] [<c113cf7c>] do_vfs_ioctl+0x7c/0x790 [ 61.306415] [ 61.306415] [<c113d6b8>] SyS_ioctl+0x28/0x50 [ 61.306415] [ 61.306415] [<c100179f>] do_int80_syscall_32+0x3f/0x110 [ 61.306415] [ 61.306415] [<c14bba3f>] restore_all+0x0/0x61 [ 61.306415] [ 61.306415] the dependencies between the lock to be acquired[ 61.306415] and SOFTIRQ-irq-unsafe lock: [ 61.306415] -> (&dev->lock){+.+...} ops: 56 { [ 61.306415] HARDIRQ-ON-W at: [ 61.306415] [ 61.306415] [<c1075be7>] __lock_acquire+0x577/0x1770 [ 61.306415] [ 61.306415] [<c107717c>] lock_acquire+0x7c/0x150 [ 61.306415] [ 61.306415] [<c14b7add>] mutex_lock_nested+0x2d/0x4a0 [ 61.306415] [ 61.306415] [<c133747d>] phy_probe+0x4d/0xc0 [ 61.306415] [ 61.306415] [<c1338afe>] phy_attach_direct+0xbe/0x190 [ 61.306415] [ 61.306415] [<c1338ca7>] phy_connect_direct+0x17/0x60 [ 61.306415] [ 61.306415] [<c1338d23>] phy_connect+0x33/0x70 [ 61.306415] [ 61.306415] [<d09357a0>] r6040_init_one+0x3a0/0x500 [r6040] [ 61.306415] [ 61.306415] [<c12a78c7>] pci_device_probe+0x77/0xd0 [ 61.306415] [ 61.306415] [<c12f5e15>] driver_probe_device+0x145/0x280 [ 61.306415] [ 61.306415] [<c12f5fd9>] __driver_attach+0x89/0x90 [ 61.306415] [ 61.306415] [<c12f43ef>] bus_for_each_dev+0x4f/0x80 [ 61.306415] [ 61.306415] [<c12f5954>] driver_attach+0x14/0x20 [ 61.306415] [ 61.306415] [<c12f55b7>] bus_add_driver+0x197/0x210 [ 61.306415] [ 61.306415] [<c12f6a21>] driver_register+0x51/0xd0 [ 61.306415] [ 61.306415] [<c12a6955>] __pci_register_driver+0x45/0x50 [ 61.306415] [ 61.306415] [<d0938017>] 0xd0938017 [ 61.306415] [ 61.306415] [<c100043f>] do_one_initcall+0x2f/0x140 [ 61.306415] [ 61.306415] [<c10e48c0>] do_init_module+0x4a/0x19b [ 61.306415] [ 61.306415] [<c10a680e>] load_module+0x1b2e/0x2070 [ 61.306415] [ 61.306415] [<c10a6eb9>] SyS_finit_module+0x69/0x80 [ 61.306415] [ 61.306415] [<c100179f>] do_int80_syscall_32+0x3f/0x110 [ 61.306415] [ 61.306415] [<c14bba3f>] restore_all+0x0/0x61 [ 61.306415] SOFTIRQ-ON-W at: [ 61.306415] [ 61.306415] [<c1075c0c>] __lock_acquire+0x59c/0x1770 [ 61.306415] [ 61.306415] [<c107717c>] lock_acquire+0x7c/0x150 [ 61.306415] [ 61.306415] [<c14b7add>] mutex_lock_nested+0x2d/0x4a0 [ 61.306415] [ 61.306415] [<c133747d>] phy_probe+0x4d/0xc0 [ 61.306415] [ 61.306415] [<c1338afe>] phy_attach_direct+0xbe/0x190 [ 61.306415] [ 61.306415] [<c1338ca7>] phy_connect_direct+0x17/0x60 [ 61.306415] [ 61.306415] [<c1338d23>] phy_connect+0x33/0x70 [ 61.306415] [ 61.306415] [<d09357a0>] r6040_init_one+0x3a0/0x500 [r6040] [ 61.306415] [ 61.306415] [<c12a78c7>] pci_device_probe+0x77/0xd0 [ 61.306415] [ 61.306415] [<c12f5e15>] driver_probe_device+0x145/0x280 [ 61.306415] [ 61.306415] [<c12f5fd9>] __driver_attach+0x89/0x90 [ 61.306415] [ 61.306415] [<c12f43ef>] bus_for_each_dev+0x4f/0x80 [ 61.306415] [ 61.306415] [<c12f5954>] driver_attach+0x14/0x20 [ 61.306415] [ 61.306415] [<c12f55b7>] bus_add_driver+0x197/0x210 [ 61.306415] [ 61.306415] [<c12f6a21>] driver_register+0x51/0xd0 [ 61.306415] [ 61.306415] [<c12a6955>] __pci_register_driver+0x45/0x50 [ 61.306415] [ 61.306415] [<d0938017>] 0xd0938017 [ 61.306415] [ 61.306415] [<c100043f>] do_one_initcall+0x2f/0x140 [ 61.306415] [ 61.306415] [<c10e48c0>] do_init_module+0x4a/0x19b [ 61.306415] [ 61.306415] [<c10a680e>] load_module+0x1b2e/0x2070 [ 61.306415] [ 61.306415] [<c10a6eb9>] SyS_finit_module+0x69/0x80 [ 61.306415] [ 61.306415] [<c100179f>] do_int80_syscall_32+0x3f/0x110 [ 61.306415] [ 61.306415] [<c14bba3f>] restore_all+0x0/0x61 [ 61.306415] INITIAL USE at: [ 61.306415] [ 61.306415] [<c107586e>] __lock_acquire+0x1fe/0x1770 [ 61.306415] [ 61.306415] [<c107717c>] lock_acquire+0x7c/0x150 [ 61.306415] [ 61.306415] [<c14b7add>] mutex_lock_nested+0x2d/0x4a0 [ 61.306415] [ 61.306415] [<c133747d>] phy_probe+0x4d/0xc0 [ 61.306415] [ 61.306415] [<c1338afe>] phy_attach_direct+0xbe/0x190 [ 61.306415] [ 61.306415] [<c1338ca7>] phy_connect_direct+0x17/0x60 [ 61.306415] [ 61.306415] [<c1338d23>] phy_connect+0x33/0x70 [ 61.306415] [ 61.306415] [<d09357a0>] r6040_init_one+0x3a0/0x500 [r6040] [ 61.306415] [ 61.306415] [<c12a78c7>] pci_device_probe+0x77/0xd0 [ 61.306415] [ 61.306415] [<c12f5e15>] driver_probe_device+0x145/0x280 [ 61.306415] [ 61.306415] [<c12f5fd9>] __driver_attach+0x89/0x90 [ 61.306415] [ 61.306415] [<c12f43ef>] bus_for_each_dev+0x4f/0x80 [ 61.306415] [ 61.306415] [<c12f5954>] driver_attach+0x14/0x20 [ 61.306415] [ 61.306415] [<c12f55b7>] bus_add_driver+0x197/0x210 [ 61.306415] [ 61.306415] [<c12f6a21>] driver_register+0x51/0xd0 [ 61.306415] [ 61.306415] [<c12a6955>] __pci_register_driver+0x45/0x50 [ 61.306415] [ 61.306415] [<d0938017>] 0xd0938017 [ 61.306415] [ 61.306415] [<c100043f>] do_one_initcall+0x2f/0x140 [ 61.306415] [ 61.306415] [<c10e48c0>] do_init_module+0x4a/0x19b [ 61.306415] [ 61.306415] [<c10a680e>] load_module+0x1b2e/0x2070 [ 61.306415] [ 61.306415] [<c10a6eb9>] SyS_finit_module+0x69/0x80 [ 61.306415] [ 61.306415] [<c100179f>] do_int80_syscall_32+0x3f/0x110 [ 61.306415] [ 61.306415] [<c14bba3f>] restore_all+0x0/0x61 [ 61.306415] } [ 61.306415] ... key at: [<c1f28f39>] __key.43998+0x0/0x8 [ 61.306415] ... acquired at: [ 61.306415] [ 61.306415] [<c1074a32>] check_irq_usage+0x42/0xb0 [ 61.306415] [ 61.306415] [<c107677c>] __lock_acquire+0x110c/0x1770 [ 61.306415] [ 61.306415] [<c107717c>] lock_acquire+0x7c/0x150 [ 61.306415] [ 61.306415] [<c14b7add>] mutex_lock_nested+0x2d/0x4a0 [ 61.306415] [ 61.306415] [<c1336276>] phy_stop+0x16/0x80 [ 61.306415] [ 61.306415] [<d0934ce9>] r6040_close+0x89/0x230 [r6040] [ 61.306415] [ 61.306415] [<c13a0a91>] __dev_close_many+0x61/0xa0 [ 61.306415] [ 61.306415] [<c13a0bbf>] __dev_close+0x1f/0x30 [ 61.306415] [ 61.306415] [<c13a9127>] __dev_change_flags+0x87/0x150 [ 61.306415] [ 61.306415] [<c13a9213>] dev_change_flags+0x23/0x60 [ 61.306415] [ 61.306415] [<c1416238>] devinet_ioctl+0x5f8/0x6f0 [ 61.306415] [ 61.306415] [<c1417f75>] inet_ioctl+0x65/0x90 [ 61.306415] [ 61.306415] [<c1389b54>] sock_ioctl+0x124/0x2b0 [ 61.306415] [ 61.306415] [<c113cf7c>] do_vfs_ioctl+0x7c/0x790 [ 61.306415] [ 61.306415] [<c113d6b8>] SyS_ioctl+0x28/0x50 [ 61.306415] [ 61.306415] [<c100179f>] do_int80_syscall_32+0x3f/0x110 [ 61.306415] [ 61.306415] [<c14bba3f>] restore_all+0x0/0x61 [ 61.306415] [ 61.306415] [ 61.306415] stack backtrace: [ 61.306415] CPU: 0 PID: 449 Comm: ifconfig Not tainted 4.9.0-gb898d2d-manuel #1 [ 61.306415] Call Trace: [ 61.306415] dump_stack+0x16/0x19 [ 61.306415] check_usage+0x3f6/0x550 [ 61.306415] ? check_usage+0x4d/0x550 [ 61.306415] check_irq_usage+0x42/0xb0 [ 61.306415] __lock_acquire+0x110c/0x1770 [ 61.306415] lock_acquire+0x7c/0x150 [ 61.306415] ? phy_stop+0x16/0x80 [ 61.306415] mutex_lock_nested+0x2d/0x4a0 [ 61.306415] ? phy_stop+0x16/0x80 [ 61.306415] ? r6040_close+0x24/0x230 [r6040] [ 61.306415] ? __delay+0x9/0x10 [ 61.306415] phy_stop+0x16/0x80 [ 61.306415] r6040_close+0x89/0x230 [r6040] [ 61.306415] __dev_close_many+0x61/0xa0 [ 61.306415] __dev_close+0x1f/0x30 [ 61.306415] __dev_change_flags+0x87/0x150 [ 61.306415] dev_change_flags+0x23/0x60 [ 61.306415] devinet_ioctl+0x5f8/0x6f0 [ 61.306415] inet_ioctl+0x65/0x90 [ 61.306415] sock_ioctl+0x124/0x2b0 [ 61.306415] ? dlci_ioctl_set+0x30/0x30 [ 61.306415] do_vfs_ioctl+0x7c/0x790 [ 61.306415] ? trace_hardirqs_on+0xb/0x10 [ 61.306415] ? call_rcu_sched+0xd/0x10 [ 61.306415] ? __put_cred+0x32/0x50 [ 61.306415] ? SyS_faccessat+0x178/0x1e0 [ 61.306415] SyS_ioctl+0x28/0x50 [ 61.306415] do_int80_syscall_32+0x3f/0x110 [ 61.306415] entry_INT80_32+0x2f/0x2f [ 61.306415] EIP: 0xb764d364 [ 61.306415] EFLAGS: 00000286 CPU: 0 [ 61.306415] EAX: ffffffda EBX: 00000004 ECX: 00008914 EDX: bfa99d7c [ 61.306415] ESI: bfa99e4c EDI: fffffffe EBP: 00000004 ESP: bfa99d58 [ 61.306415] DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b [ 63.836607] r6040 0000:00:08.0 eth0: Link is Down Signed-off-by: Manuel Bessler <manuel.bessler@sensus.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-13net: deprecate eth_change_mtu, remove usageJarod Wilson
With centralized MTU checking, there's nothing productive done by eth_change_mtu that isn't already done in dev_set_mtu, so mark it as deprecated and remove all usage of it in the kernel. All callers have been audited for calls to alloc_etherdev* or ether_setup directly, which means they all have a valid dev->min_mtu and dev->max_mtu. Now eth_change_mtu prints out a netdev_warn about being deprecated, for the benefit of out-of-tree drivers that might be utilizing it. Of note, dvb_net.c actually had dev->mtu = 4096, while using eth_change_mtu, meaning that if you ever tried changing it's mtu, you couldn't set it above 1500 anymore. It's now getting dev->max_mtu also set to 4096 to remedy that. v2: fix up lantiq_etop, missed breakage due to drive not compiling on x86 CC: netdev@vger.kernel.org Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-18net: r6040: add in missing white space in error message textColin Ian King
A couple of dev_err messages span two lines and the literal string is missing a white space between words. Add the white space and join the two lines into one. Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: FLorian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-05net: r6040: Bump version and dateFlorian Fainelli
Bump version to 0.28 and date to 4th of July 2016. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-05net: r6040: Update my emailFlorian Fainelli
Update my email address in the driver and MAINTAINERS file. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-05net: r6040: Utilize napi_complete_done()Florian Fainelli
We maintain how much work we did in NAPI context, so provide that with napi_complete_done(). Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-05net: r6040: Utilize __napi_schedule_irqoffFlorian Fainelli
We are already in hard IRQ context, so we can use __napi_schedule_irqoff() to save a few operations. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-05net: r6040: Check for skb->xmit_moreFlorian Fainelli
Kick the transmission only if this is the last SKB to transmit or the queue is not already stopped. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-05net: r6040: Reclaim transmitted buffers in NAPIFlorian Fainelli
Instead of taking one interrupt per packet transmitted, re-use the same NAPI context to free transmitted buffers. Since we are no longer in hard IRQ context replace dev_kfree_skb_irq() by dev_kfree_skb(). Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-05net: r6040: Utilize skb_put_padto()Florian Fainelli
Pad the SKB to the minimum length of ETH_ZLEN by using skb_put_padto() and take this operation out of the critical section since there is no need to check any HW resources before doing that. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-05net: r6040: Increase statistics upon transmit completionFlorian Fainelli
r6040_xmit() is increasing transmit statistics during transmission while this may still fail, do this in r6040_tx() where we complete transmitted buffers instead. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-05net: r6040: Utilize phy_print_statusFlorian Fainelli
Instead of open coding our own version utilize the library provided function. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-28net: ethernet: r6040: use phy_ethtool_{get|set}_link_ksettingsPhilippe Reynes
There are two generics functions phy_ethtool_{get|set}_link_ksettings, so we can use them instead of defining the same code in the driver. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-28net: ethernet: r6040: use phydev from struct net_devicePhilippe Reynes
The private structure contain a pointer to phydev, but the structure net_device already contain such pointer. So we can remove the pointer phydev in the private structure, and update the driver to use the one contained in struct net_device. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07mdio: Move allocation of interrupts into coreAndrew Lunn
Have mdio_alloc() create the array of interrupt numbers, and initialize it to POLLING. This is what most MDIO drivers want, so allowing code to be removed from the drivers. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07phy: Centralise print about attached phyAndrew Lunn
Many Ethernet drivers contain the same netdev_info() print statement about the attached phy. Move it into the phy device code. Additionally add a varargs function which can be used to append additional information. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07phy: add phydev_name() wrapperAndrew Lunn
Add a phydev_name() function, to help with moving some structure members from phy_device. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-23drivers/net: remove all references to obsolete Ethernet-HOWTOPaul Gortmaker
This howto made sense in the 1990s when users had to manually configure ISA cards with jumpers or vendor utilities, but with the implementation of PCI it became increasingly less and less relevant, to the point where it has been well over a decade since I last updated it. And there is no value in anyone else taking over updating it either. However the references to it continue to spread as boiler plate text from one Kconfig file into the next. We are not doing end users any favours by pointing them at this old document, so lets kill it with fire, once and for all, to hopefully stop any further spread. No code is changed in this commit, just Kconfig help text. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-12PCI: Remove DEFINE_PCI_DEVICE_TABLE macro useBenoit Taine
We should prefer `struct pci_device_id` over `DEFINE_PCI_DEVICE_TABLE` to meet kernel coding style guidelines. This issue was reported by checkpatch. A simplified version of the semantic patch that makes this change is as follows (http://coccinelle.lip6.fr/): // <smpl> @@ identifier i; declarer name DEFINE_PCI_DEVICE_TABLE; initializer z; @@ - DEFINE_PCI_DEVICE_TABLE(i) + const struct pci_device_id i[] = z; // </smpl> [bhelgaas: add semantic patch] Signed-off-by: Benoit Taine <benoit.taine@lip6.fr> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-03-28r6040: remove empty MDIO bus reset functionFlorian Fainelli
r6040_mdiobus_reset() does nothing useful and is optional for the MDIO bus code, so let's just remove it. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-16r6040: use ETH_ZLEN instead of MISR for SKB length checkingFlorian Fainelli
Ever since this driver was merged the following code was included: if (skb->len < MISR) skb->len = MISR; MISR is defined to 0x3C which is also equivalent to ETH_ZLEN, but use ETH_ZLEN directly which is exactly what we want to be checking for. Reported-by: Marc Volovic <marcv@ezchip.com> Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-16r6040: add delays in MDIO read/write polling loopsFlorian Fainelli
On newer and faster machines (Vortex X86DX) using the r6040 driver, it was noticed that the driver was returning an error during probing traced down to being the MDIO bus probing and the inability to complete a MDIO read operation in time. It turns out that the MDIO operations on these faster machines usually complete after ~2140 iterations which is bigger than 2048 (MAC_DEF_TIMEOUT) and results in spurious timeouts depending on the system load. Update r6040_phy_read() and r6040_phy_write() to include a 1 micro second delay in each busy-looping iteration of the loop which is a much safer operation than incrementing MAC_DEF_TIMEOUT. Reported-by: Nils Koehler <nils.koehler@ibt-interfaces.de> Reported-by: Daniel Goertzen <daniel.goertzen@gmail.com> Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-16drivers/net: delete non-required instances of include <linux/init.h>Paul Gortmaker
None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. This covers everything under drivers/net except for wireless, which has been submitted separately. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-22net: r6040: remove unnecessary pci_set_drvdata()Jingoo Han
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-19net: Move MII out from under NET_CORE and hide itBen Hutchings
All drivers that select MII also need to select NET_CORE because MII depends on it. This is a bit ridiculous because NET_CORE is just a menu option that doesn't enable any code by itself. There is also no need for it to be a visible option, since its users all select it. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-09drivers:net: Remove unnecessary OOM messages after netdev_alloc_skbJoe Perches
Emitting netdev_alloc_skb and netdev_alloc_skb_ip_align OOM messages is unnecessary as there is already a dump_stack after allocation failures. Other trivial changes around these removals: Convert a few comparisons of pointer to 0 to !pointer. Change flow to remove unnecessary label. Remove now unused variable. Hoist assignment from if. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-06r6040: check MDIO register busy waiting resultFlorian Fainelli
We are currently busy waiting for MDIO registers to complete their operation but we did not propagate the result back to the caller. Update r6040_phy_{read,write} to report the busy waiting result accordingly. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-04ethernet: Remove unnecessary alloc/OOM messages, alloc cleanupsJoe Perches
alloc failures already get standardized OOM messages and a dump_stack. Convert kzalloc's with multiplies to kcalloc. Convert kmalloc's with multiplies to kmalloc_array. Fix a few whitespace defects. Convert a constant 6 to ETH_ALEN. Use parentheses around sizeof. Convert vmalloc/memset to vzalloc. Remove now unused size variables. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-14net: phy: remove flags argument from phy_{attach, connect, connect_direct}Florian Fainelli
The flags argument of the phy_{attach,connect,connect_direct} functions is then used to assign a struct phy_device dev_flags with its value. All callers but the tg3 driver pass the flag 0, which results in the underlying PHY drivers in drivers/net/phy/ not being able to actually use any of the flags they would set in dev_flags. This patch gets rid of the flags argument, and passes phydev->dev_flags to the internal PHY library call phy_attach_direct() such that drivers which actually modify a phy device dev_flags get the value preserved for use by the underlying phy driver. Acked-by: Kosta Zertsekel <konszert@marvell.com> Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-08remove init of dev->perm_addr in driversJiri Pirko
perm_addr is initialized correctly in register_netdevice() so to init it in drivers is no longer needed. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-06ethtool: fix drvinfo strings set in driversJiri Pirko
Use strlcpy where possible to ensure the string is \0 terminated. Use always sizeof(string) instead of 32, ETHTOOL_BUSINFO_LEN and custom defines. Use snprintf instead of sprint. Remove unnecessary inits of ->fw_version Remove unnecessary inits of drvinfo struct. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-07drivers/net: fix up function prototypes after __dev* removalsGreg Kroah-Hartman
The __dev* removal patches for the network drivers ended up messing up the function prototypes for a bunch of drivers. This patch fixes all of them back up to be properly aligned. Bonus is that this almost removes 100 lines of code, always a nice surprise. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-03r6040: remove __dev* attributesBill Pemberton
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Florian Fainelli <florian@openwrt.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-09r6040: use module_pci_driver macroDevendra Naga
as the manual of module_pci_driver says that it can be used when the init and exit functions of the module does nothing but the pci_register_driver and pci_unregister_driver. use it for rdc's r6040 driver, as the init and exit paths does as above, and also this reduces a little amount of code. Signed-off-by: Devendra Naga <devendra.aaru@gmail.com> Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-07r6040: remove duplicate call to the pci_set_drvdataDevendra Naga
pci_set_drvdata is called twice at the remove path of driver, call it once. Signed-off-by: Devendra Naga <devendra.aaru@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-29r6040: Do a Proper deinit at errorpath and also when driver unloads (calling ↵Devendra Naga
r6040_remove_one) so if mdiobus_alloc fails, the errorpath doesnt do a netif_napi_del and also doesn't set the priv data of the driver to NULL. at the driver unload stage the driver doesn't remove the NAPI context, and doesnt' set the priv data to NULL, and also doesn't call the pci_iounmap. Signed-off-by: Devendra Naga <devendra.aaru@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-29r6040: disable pci device if the subsequent calls (after pci_enable_device) ↵Devendra Naga
fails the calls after the pci_enable_device may fail, and will error out with out disabling it. disable the device at error paths. Signed-off-by: Devendra Naga <devendra.aaru@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-12r6040: update copyright from 2007 to nowFlorian Fainelli
Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-12r6040: define and use bits of register PHY_CCFlorian Fainelli
Define and use the bits of the PHY_CC (status change configuration) register. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-12r6040: define and use MTPR transmit enable bitFlorian Fainelli
Define MTPR bit 0 of the register and use it where it is appropriate. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-12r6040: define and use MLSR register bitsFlorian Fainelli
Define the MLSR (MAC Last Status Register bits) for: - tx fifo under-run - tx exceed collision - tx late collision Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-12r6040: fix typo on stats update in tx pathFlorian Fainelli
We are currently updating the rx fifo error counter in the tx path while it should have been the tx fifo error counter, fix that. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-12r6040: add a MAC operation timeout defineFlorian Fainelli
2048 is the usual value for busy-waiting on a register r/w, define it as MAC_DEF_TIMEOUT and use it where it is appropriate. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-12r6040: remove unused variable mcr1 from private structureFlorian Fainelli
Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-12r6040: consolidate MAC reset to its own functionFlorian Fainelli
The reset of the MAC is currently done identically from two places and one place is not waiting for the MAC_SM bit to be set after reset. Everytime the MAC is software resetted a state machine is also needed so consolidate the reset to its own function. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-04r6040: Support the get_ts_info ethtool method.Richard Cochran
Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-15net: replace random_ether_addr() with eth_hw_addr_random()Danny Kukawka
Replace usage of random_ether_addr() with eth_hw_addr_random() to set addr_assign_type correctly to NET_ADDR_RANDOM. Change the trivial cases. v2: adapt to renamed eth_hw_addr_random() Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-31drivers/net: Remove alloc_etherdev error messagesJoe Perches
alloc_etherdev has a generic OOM/unable to alloc message. Remove the duplicative messages after alloc_etherdev calls. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-07r6040: fix typo in use of MCR0 register bitsCesar Eduardo Barros
Commit 4e16d6ebd65b4f2c4e3f780b4c5704beef64019c (r6040: define more MCR0 register bits) added #define values for MCR0 register bits and converted uses of hardcoded magic values to uses of these defines. However, one of the conversions looks suspicious: #define MCR0 0x00 /* Control register 0 */ +#define MCR0_RCVEN 0x0002 /* Receive enable */ +#define MCR0_XMTEN 0x1000 /* Transmission enable */ /* Init RDC private data */ - lp->mcr0 = 0x1002; + lp->mcr0 = MCR0_XMTEN | MCR0; I believe what was meant here was MCR0_XMTEN | MCR0_RCVEN, which makes sense and matches the original values. Signed-off-by: Cesar Eduardo Barros <cesarb@cesarb.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-04r6040: place comments before codeFlorian Fainelli
checkpatch.pl complained about the line exceding 80 columns, and the comment was actually on the same line as the code, fix that. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-12 13:44:20 +0000