summaryrefslogtreecommitdiff
path: root/drivers/usb/serial/usb-serial.c
AgeCommit message (Collapse)Author
2017-11-04USB: serial: fix module-license macrosJohan Hovold
Several GPL-2.0 drivers used "GPL" rather than "GPL v2" in their MODULE_LICENSE macros; fix the macros to match the licenses. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-04USB: serial: Remove redundant license textGreg Kroah-Hartman
Now that the SPDX tag is in all USB files, that identifies the license in a specific and legally-defined manner. So the extra GPL text wording can be removed as it is no longer needed at all. This is done on a quest to remove the 700+ different ways that files in the kernel describe the GPL license text. And there's unneeded stuff like the address (sometimes incorrect) for the FSF which is never needed. No copyright headers or other non-license-description text was removed. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-04USB: add SPDX identifiers to all remaining files in drivers/usb/Greg Kroah-Hartman
It's good to have SPDX identifiers in all files to make it easier to audit the kernel tree for correct licenses. Update the drivers/usb/ and include/linux/usb* files with the correct SPDX license identifier based on the license text in the file itself. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This work is based on a script and data from Thomas Gleixner, Philippe Ombredanne, and Kate Stewart. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Philippe Ombredanne <pombredanne@nexb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Acked-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-13USB: serial: drop unused core USB driverJohan Hovold
Drop the usb-serial-core USB driver that was registered at module init but then never used. This was a remnant dating back to 2004 (!) when this struct usb_driver was used for the generic driver; see commit bbc53b7d7322 ("USB: fix bug where removing usb-serial modules or usb serial devices could oops") in the tglx bitkeeper-history archive. Note that every usb-serial driver (including the generic one) registers its own USB (interface) driver along with its usb-serial bus drivers. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2017-06-21USB: serial: propagate late probe errorsJohan Hovold
Propagate errnos for late probe errors (e.g. -ENOMEM on allocation failures) instead of always returning -EIO. Note that some drivers are currently returning -ENODEV from their attach callbacks when a device is not supported, but this has also been mapped to -EIO. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2017-06-21USB: serial: refactor port endpoint setupJohan Hovold
Make the probe callback more readable by refactoring the port endpoint-resource setup by adding four helper functions. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2017-03-31USB: serial: drop obsolete open-race workaroundJohan Hovold
Commit a65a6f14dc24 ("USB: serial: fix race between probe and open") fixed a race between probe and open, which could lead to crashes when a not yet fully initialised port was being opened. This race was later incidentally closed by commit 7e73eca6a7b2 ("TTY: move cdev_add to tty_register_device") which moved character-device registration from tty_register_driver to tty_register_device, which isn't called until the port has been fully set up. Remove the now redundant workaround which had the negative side effect of not allowing a port to be opened immediately after user space had been notified of a new tty device. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2017-03-28USB: serial: move pl2303 hack out of usb-serial coreJohan Hovold
Some pl2303 devices require the use of the interrupt endpoint of an unrelated interface. This has so far been dealt with in usb-serial core, but can now be moved to a driver calc_num_ports callback. Note that we relax the endpoint requirements checked by core and instead verify that we have an interrupt-in endpoint in calc_num_ports for all devices so that the hack can first be applied. Signed-off-by: Johan Hovold <johan@kernel.org>
2017-03-28USB: serial: add calc_num_ports callback to generic driverJohan Hovold
Add a calc_num_ports callback to the generic driver and verify that the device has the required endpoints there instead of in core. Note that the generic driver num_ports field was never used. Signed-off-by: Johan Hovold <johan@kernel.org>
2017-03-28USB: serial: add probe callback to generic driverJohan Hovold
Add a probe callback to the generic driver and print the only-for-testing message there. This is a first step in getting rid of the CONFIG_USB_SERIAL_GENERIC ifdef from usb-serial core. Signed-off-by: Johan Hovold <johan@kernel.org>
2017-03-28USB: serial: allow subdrivers to modify port-endpoint mappingJohan Hovold
Allow subdrivers to modify the port-endpoint mapping by passing the endpoint descriptors to calc_num_ports. The callback can now also be used to verify that the required endpoints exists and abort probing otherwise. This will allow us to get rid of a few hacks in subdrivers that are already modifying the port-endpoint mapping (or aborting probe due to missing endpoints), but only after the port structures have been setup. Signed-off-by: Johan Hovold <johan@kernel.org>
2017-03-16USB: serial: add endpoint sanity check to coreJohan Hovold
Allow drivers to specify a minimum number of endpoints per type, which USB serial core will verify after subdriver probe has returned (where the current alternate setting may have been changed). Signed-off-by: Johan Hovold <johan@kernel.org>
2017-03-16USB: serial: replace runtime overflow checkJohan Hovold
Since commit 0a8fd1346254 ("USB: fix problems with duplicate endpoint addresses") USB core guarantees that there are no more than 15 endpoint descriptors per type (and altsetting) so the corresponding overflow checks can now be replaced with a compile-time check on the array sizes (and indirectly the maximum number of ports). Signed-off-by: Johan Hovold <johan@kernel.org>
2017-03-16USB: serial: refactor and clean up endpoint handlingJohan Hovold
Refactor and clean up endpoint handling. This specifically moves the endpoint-descriptor arrays of the stack. Note that an err_free_epds label is not yet added to avoid a compilation warning when neither CONFIG_USB_SERIAL_PL2303 or CONFIG_USB_SERIAL_GENERIC is selected. Signed-off-by: Johan Hovold <johan@kernel.org>
2017-03-16USB: serial: clean up endpoint and port-counter typesJohan Hovold
Use unsigned-char type for the endpoint and port counters. Signed-off-by: Johan Hovold <johan@kernel.org>
2017-03-16USB: serial: clean up probe error pathsJohan Hovold
Clean up the probe error paths by adding a couple of new error labels. Signed-off-by: Johan Hovold <johan@kernel.org>
2016-10-21USB: serial: fix potential NULL-dereference at probeJohan Hovold
Make sure we have at least one port before attempting to register a console. Currently, at least one driver binds to a "dummy" interface and requests zero ports for it. Should such an interface also lack endpoints, we get a NULL-deref during probe. Fixes: e5b1e2062e05 ("USB: serial: make minor allocation dynamic") Cc: stable <stable@vger.kernel.org> # 3.11 Signed-off-by: Johan Hovold <johan@kernel.org>
2016-08-08USB: serial: fix memleak in driver-registration error pathAlexey Klimov
udriver struct allocated by kzalloc() will not be freed if usb_register() and next calls fail. This patch fixes this by adding one more step with kfree(udriver) in error path. Signed-off-by: Alexey Klimov <klimov.linux@gmail.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2016-05-20Merge tag 'usb-4.7-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB updates from Greg KH: "Here's the big pull request for USB and PHY drivers for 4.7-rc1 Full details in the shortlog, but it's the normal major gadget driver updates, phy updates, new usbip code, as well as a bit of lots of other stuff. All have been in linux-next with no reported issues" * tag 'usb-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (164 commits) USB: serial: ti_usb_3410_5052: add MOXA UPORT 11x0 support USB: serial: fix minor-number allocation USB: serial: quatech2: fix use-after-free in probe error path USB: serial: mxuport: fix use-after-free in probe error path USB: serial: keyspan: fix debug and error messages USB: serial: keyspan: fix URB unlink USB: serial: keyspan: fix use-after-free in probe error path USB: serial: io_edgeport: fix memory leaks in probe error path USB: serial: io_edgeport: fix memory leaks in attach error path usb: Remove unnecessary space before operator ','. usb: Remove unnecessary space before open square bracket. USB: FHCI: avoid redundant condition usb: host: xhci-rcar: Avoid long wait in xhci_reset() usb/host/fotg210: remove dead code in create_sysfs_files usb: wusbcore: Do not initialise statics to 0. usb: wusbcore: Remove space before ',' and '(' . USB: serial: cp210x: clean up CRTSCTS flag code USB: serial: cp210x: get rid of magic numbers in CRTSCTS flag code USB: serial: cp210x: fix hardware flow-control disable USB: serial: option: add even more ZTE device ids ...
2016-05-10USB: serial: fix minor-number allocationJohan Hovold
Due to a missing upper bound, invalid minor numbers could be assigned to ports. Such devices would later fail to register, but let's catch this early as intended and avoid having devices with only a subset of their ports registered (potentially the empty set). Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-30tty: Replace ASYNC_INITIALIZED bit and update atomicallyPeter Hurley
Replace ASYNC_INITIALIZED bit in the tty_port::flags field with TTY_PORT_INITIALIZED bit in the tty_port::iflags field. Introduce helpers tty_port_set_initialized() and tty_port_initialized() to abstract atomic bit ops. Note: the transforms for test_and_set_bit() and test_and_clear_bit() are unnecessary as the state transitions are already mutually exclusive; the tty lock prevents concurrent open/close/hangup. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-25USB: serial: use IS_ENABLED() instead of checking for FOO || FOO_MODULEJavier Martinez Canillas
The IS_ENABLED() macro checks if a Kconfig symbol has been enabled either built-in or as a module, use that macro instead of open coding the same. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2015-07-09USB: serial: Destroy serial_minors IDR on module exitJohannes Thumshirn
Destroy serial_minors IDR on module exit, reclaiming the allocated memory. This was detected by the following semantic patch (written by Luis Rodriguez <mcgrof@suse.com>) <SmPL> @ defines_module_init @ declarer name module_init, module_exit; declarer name DEFINE_IDR; identifier init; @@ module_init(init); @ defines_module_exit @ identifier exit; @@ module_exit(exit); @ declares_idr depends on defines_module_init && defines_module_exit @ identifier idr; @@ DEFINE_IDR(idr); @ on_exit_calls_destroy depends on declares_idr && defines_module_exit @ identifier declares_idr.idr, defines_module_exit.exit; @@ exit(void) { ... idr_destroy(&idr); ... } @ missing_module_idr_destroy depends on declares_idr && defines_module_exit && !on_exit_calls_destroy @ identifier declares_idr.idr, defines_module_exit.exit; @@ exit(void) { ... +idr_destroy(&idr); } </SmPL> Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Cc: stable <stable@vger.kernel.org> # v3.11 Signed-off-by: Johan Hovold <johan@kernel.org>
2015-02-26USB: serial: fix port attribute-creation raceJohan Hovold
Fix attribute-creation race with userspace by using the port device groups field to create the port attributes. Also use %u when printing the port number, which is unsigned, even though we do not currently support more than 128 ports per device. Reported-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Greg Kroah-Hartman <greg@kroah.com>
2015-02-26Revert "USB: serial: make bulk_out_size a lower limit"Johan Hovold
This reverts commit 5083fd7bdfe6760577235a724cf6dccae13652c2. A bulk-out size smaller than the end-point size is indeed valid. The offending commit broke the usb-debug driver for EHCI debug devices, which use 8-byte buffers. Fixes: 5083fd7bdfe6 ("USB: serial: make bulk_out_size a lower limit") Reported-by: "Li, Elvin" <elvin.li@intel.com> Cc: stable <stable@vger.kernel.org> # v3.15 Signed-off-by: Johan Hovold <johan@kernel.org>
2014-08-27USB: serial: fix potential heap buffer overflowJohan Hovold
Make sure to verify the number of ports requested by subdriver to avoid writing beyond the end of fixed-size array in interface data. The current usb-serial implementation is limited to eight ports per interface but failed to verify that the number of ports requested by a subdriver (which could have been determined from device descriptors) did not exceed this limit. Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-08-27USB: serial: fix potential stack buffer overflowJohan Hovold
Make sure to verify the maximum number of endpoints per type to avoid writing beyond the end of a stack-allocated array. The current usb-serial implementation is limited to eight ports per interface but failed to verify that the number of endpoints of a certain type reported by a device did not exceed this limit. Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-27USB: serial: remove overly defensive port testsJohan Hovold
The only way a port pointer may be NULL is if probe() failed, and in that case neither disconnect(), resume(), or reset_resume() will be called. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-24USB: serial: fix sysfs-attribute removal deadlockJohan Hovold
Fix driver new_id sysfs-attribute removal deadlock by making sure to not hold any locks that the attribute operations grab when removing the attribute. Specifically, usb_serial_deregister holds the table mutex when deregistering the driver, which includes removing the new_id attribute. This can lead to a deadlock as writing to new_id increments the attribute's active count before trying to grab the same mutex in usb_serial_probe. The deadlock can easily be triggered by inserting a sleep in usb_serial_deregister and writing the id of an unbound device to new_id during module unload. As the table mutex (in this case) is used to prevent subdriver unload during probe, it should be sufficient to only hold the lock while manipulating the usb-serial driver list during deregister. A racing probe will then either fail to find a matching subdriver or fail to get the corresponding module reference. Since v3.15-rc1 this also triggers the following lockdep warning: ====================================================== [ INFO: possible circular locking dependency detected ] 3.15.0-rc2 #123 Tainted: G W ------------------------------------------------------- modprobe/190 is trying to acquire lock: (s_active#4){++++.+}, at: [<c0167aa0>] kernfs_remove_by_name_ns+0x4c/0x94 but task is already holding lock: (table_lock){+.+.+.}, at: [<bf004d84>] usb_serial_deregister+0x3c/0x78 [usbserial] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (table_lock){+.+.+.}: [<c0075f84>] __lock_acquire+0x1694/0x1ce4 [<c0076de8>] lock_acquire+0xb4/0x154 [<c03af3cc>] _raw_spin_lock+0x4c/0x5c [<c02bbc24>] usb_store_new_id+0x14c/0x1ac [<bf007eb4>] new_id_store+0x68/0x70 [usbserial] [<c025f568>] drv_attr_store+0x30/0x3c [<c01690e0>] sysfs_kf_write+0x5c/0x60 [<c01682c0>] kernfs_fop_write+0xd4/0x194 [<c010881c>] vfs_write+0xbc/0x198 [<c0108e4c>] SyS_write+0x4c/0xa0 [<c000f880>] ret_fast_syscall+0x0/0x48 -> #0 (s_active#4){++++.+}: [<c03a7a28>] print_circular_bug+0x68/0x2f8 [<c0076218>] __lock_acquire+0x1928/0x1ce4 [<c0076de8>] lock_acquire+0xb4/0x154 [<c0166b70>] __kernfs_remove+0x254/0x310 [<c0167aa0>] kernfs_remove_by_name_ns+0x4c/0x94 [<c0169fb8>] remove_files.isra.1+0x48/0x84 [<c016a2fc>] sysfs_remove_group+0x58/0xac [<c016a414>] sysfs_remove_groups+0x34/0x44 [<c02623b8>] driver_remove_groups+0x1c/0x20 [<c0260e9c>] bus_remove_driver+0x3c/0xe4 [<c026235c>] driver_unregister+0x38/0x58 [<bf007fb4>] usb_serial_bus_deregister+0x84/0x88 [usbserial] [<bf004db4>] usb_serial_deregister+0x6c/0x78 [usbserial] [<bf005330>] usb_serial_deregister_drivers+0x2c/0x4c [usbserial] [<bf016618>] usb_serial_module_exit+0x14/0x1c [sierra] [<c009d6cc>] SyS_delete_module+0x184/0x210 [<c000f880>] ret_fast_syscall+0x0/0x48 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(table_lock); lock(s_active#4); lock(table_lock); lock(s_active#4); *** DEADLOCK *** 1 lock held by modprobe/190: #0: (table_lock){+.+.+.}, at: [<bf004d84>] usb_serial_deregister+0x3c/0x78 [usbserial] stack backtrace: CPU: 0 PID: 190 Comm: modprobe Tainted: G W 3.15.0-rc2 #123 [<c0015e10>] (unwind_backtrace) from [<c0013728>] (show_stack+0x20/0x24) [<c0013728>] (show_stack) from [<c03a9a54>] (dump_stack+0x24/0x28) [<c03a9a54>] (dump_stack) from [<c03a7cac>] (print_circular_bug+0x2ec/0x2f8) [<c03a7cac>] (print_circular_bug) from [<c0076218>] (__lock_acquire+0x1928/0x1ce4) [<c0076218>] (__lock_acquire) from [<c0076de8>] (lock_acquire+0xb4/0x154) [<c0076de8>] (lock_acquire) from [<c0166b70>] (__kernfs_remove+0x254/0x310) [<c0166b70>] (__kernfs_remove) from [<c0167aa0>] (kernfs_remove_by_name_ns+0x4c/0x94) [<c0167aa0>] (kernfs_remove_by_name_ns) from [<c0169fb8>] (remove_files.isra.1+0x48/0x84) [<c0169fb8>] (remove_files.isra.1) from [<c016a2fc>] (sysfs_remove_group+0x58/0xac) [<c016a2fc>] (sysfs_remove_group) from [<c016a414>] (sysfs_remove_groups+0x34/0x44) [<c016a414>] (sysfs_remove_groups) from [<c02623b8>] (driver_remove_groups+0x1c/0x20) [<c02623b8>] (driver_remove_groups) from [<c0260e9c>] (bus_remove_driver+0x3c/0xe4) [<c0260e9c>] (bus_remove_driver) from [<c026235c>] (driver_unregister+0x38/0x58) [<c026235c>] (driver_unregister) from [<bf007fb4>] (usb_serial_bus_deregister+0x84/0x88 [usbserial]) [<bf007fb4>] (usb_serial_bus_deregister [usbserial]) from [<bf004db4>] (usb_serial_deregister+0x6c/0x78 [usbserial]) [<bf004db4>] (usb_serial_deregister [usbserial]) from [<bf005330>] (usb_serial_deregister_drivers+0x2c/0x4c [usbserial]) [<bf005330>] (usb_serial_deregister_drivers [usbserial]) from [<bf016618>] (usb_serial_module_exit+0x14/0x1c [sierra]) [<bf016618>] (usb_serial_module_exit [sierra]) from [<c009d6cc>] (SyS_delete_module+0x184/0x210) [<c009d6cc>] (SyS_delete_module) from [<c000f880>] (ret_fast_syscall+0x0/0x48) Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-12USB: serial: add missing newlines to dev_<level> messages.Johan Hovold
Add missing newlines to dev_<level> messages. Also make some messages less verbose where appropriate. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
2014-03-12USB: serial: add missing bracesJohan Hovold
Add missing braces to conditional branches and one loop in usb-serial core and generic implementation. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
2014-03-12USB: serial: make bulk_out_size a lower limitJohan Hovold
Drivers are allowed to override the default bulk-out buffer size (endpoint maximum packet size) in order to increase throughput, but it does not make much sense to allow buffers smaller than the default. Note that this is already how bulk_in_size is defined. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
2014-01-03USB: serial: clean up ioctl debuggingJohan Hovold
Remove redundant ioctl debugging from subdrivers. The ioctl request code has already been logged by usb-serial core. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-23USB: serial: clean up dtr_rtsJohan Hovold
Since commit 957dacae ("TTY: fix DTR not being dropped on hang up") dtr_rts is no longer called for uninitialised ports (e.g. after a disconnect), which removes the need to grab the disconnect mutex. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-17USB: serial: increase the number of devices we supportGreg Kroah-Hartman
We had the limit of 255 USB to serial devices on one system for almost 15 years, with no complaints. But now it's time to move on from these tiny "baby" systems, and bump the number up to 512, which should last us a few more years: "512 is a nice number" -- Tobias Winter Note, this is still a static value, and uses up tty core memory with this many tty devices allocated. Converting the driver to use TTY_DRIVER_DYNAMIC_DEV is the next thing to do in order to remove this limitation. Reported-by: Tobias Winter <tobias@linuxdingsda.de> Tested-by: Tobias Winter <tobias@linuxdingsda.de> Reviewed-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-17USB: serial: make minor allocation dynamicGreg Kroah-Hartman
This moves the allocation of minor device numbers from a static array to be dynamic, using the idr interface. This means that you could potentially get "gaps" in a minor number range for a single USB serial device with multiple ports, but all should still work properly. We remove the 'minor' field from the usb_serial structure, as it no longer makes any sense for it (use the field in the usb_serial_port structure if you really want to know this number), and take the fact that we were overloading a number in this field to determine if we had initialized the minor numbers or not, and just use a flag variable instead. Note, we still have the limitation of 255 USB to serial devices in the system, as that is all we are registering with the TTY layer at this point in time. Tested-by: Tobias Winter <tobias@linuxdingsda.de> Reviewed-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-10USB: serial: ports: add minor and port numberGreg Kroah-Hartman
The usb_serial_port structure had the number field, which was the minor number for the port, which almost no one really cared about. They really wanted the number of the port within the device, which you had to subtract from the minor of the parent usb_serial_device structure. To clean this up, provide the real minor number of the port, and the number of the port within the serial device separately, as these numbers might not be related in the future. Bonus is that this cleans up a lot of logic in the drivers, and saves lines overall. Tested-by: Tobias Winter <tobias@linuxdingsda.de> Reviewed-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -- drivers/staging/serqt_usb2/serqt_usb2.c | 21 +++-------- drivers/usb/serial/ark3116.c | 2 - drivers/usb/serial/bus.c | 6 +-- drivers/usb/serial/console.c | 2 - drivers/usb/serial/cp210x.c | 2 - drivers/usb/serial/cypress_m8.c | 4 +- drivers/usb/serial/digi_acceleport.c | 6 --- drivers/usb/serial/f81232.c | 5 +- drivers/usb/serial/garmin_gps.c | 6 +-- drivers/usb/serial/io_edgeport.c | 58 ++++++++++++-------------------- drivers/usb/serial/io_ti.c | 21 ++++------- drivers/usb/serial/keyspan.c | 29 +++++++--------- drivers/usb/serial/metro-usb.c | 4 +- drivers/usb/serial/mos7720.c | 37 +++++++++----------- drivers/usb/serial/mos7840.c | 52 +++++++++------------------- drivers/usb/serial/opticon.c | 2 - drivers/usb/serial/pl2303.c | 2 - drivers/usb/serial/quatech2.c | 7 +-- drivers/usb/serial/sierra.c | 2 - drivers/usb/serial/ti_usb_3410_5052.c | 10 ++--- drivers/usb/serial/usb-serial.c | 7 ++- drivers/usb/serial/usb_wwan.c | 2 - drivers/usb/serial/whiteheat.c | 20 +++++------ include/linux/usb/serial.h | 6 ++- 24 files changed, 133 insertions(+), 180 deletions(-)
2013-06-05USB: serial: fix TIOCMIWAIT return valueJohan Hovold
Fix regression introduced by commit 143d9d9616 ("USB: serial: add tiocmiwait subdriver operation") which made the ioctl operation return ENODEV rather than ENOIOCTLCMD when a subdriver TIOCMIWAIT implementation is missing. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-16USB: serial: clean up chars_in_bufferJohan Hovold
No need to grab disconnect mutex in chars_in_buffer now that no sub-driver is or should be querying hardware buffers anymore. (They should use wait_until_sent.) Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-16USB: serial: add generic wait_until_sent implementationJohan Hovold
Add generic wait_until_sent implementation which polls for empty hardware buffers using the new port-operation tx_empty. The generic implementation will be used for all sub-drivers that implement tx_empty but does not define wait_until_sent. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-16USB: serial: add wait_until_sent operationJohan Hovold
Add wait_until_sent operation which can be used to wait for hardware buffers to drain. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-29Merge tag 'usb-3.10-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB patches from Greg Kroah-Hartman: "Here's the big USB pull request for 3.10-rc1. Lots of USB patches here, the majority being USB gadget changes and USB-serial driver cleanups, the rest being ARM build fixes / cleanups, and individual driver updates. We also finally got some chipidea fixes, which have been delayed for a number of kernel releases, as the maintainer has now reappeared. All of these have been in linux-next for a while" * tag 'usb-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (568 commits) USB: ehci-msm: USB_MSM_OTG needs USB_PHY USB: OHCI: avoid conflicting platform drivers USB: OMAP: ISP1301 needs USB_PHY USB: lpc32xx: ISP1301 needs USB_PHY USB: ftdi_sio: enable two UART ports on ST Microconnect Lite usb: phy: tegra: don't call into tegra-ehci directly usb: phy: phy core cannot yet be a module USB: Fix initconst in ehci driver usb-storage: CY7C68300A chips do not support Cypress ATACB USB: serial: option: Added support Olivetti Olicard 145 USB: ftdi_sio: correct ST Micro Connect Lite PIDs ARM: mxs_defconfig: add CONFIG_USB_PHY ARM: imx_v6_v7_defconfig: add CONFIG_USB_PHY usb: phy: remove exported function from __init section usb: gadget: zero: put function instances on unbind usb: gadget: f_sourcesink.c: correct a copy-paste misnomer usb: gadget: cdc2: fix error return code in cdc_do_config() usb: gadget: multi: fix error return code in rndis_do_config() usb: gadget: f_obex: fix error return code in obex_bind() USB: storage: convert to use module_usb_driver() ...
2013-04-01Merge 3.9-rc5 into tty-nextGreg Kroah-Hartman
We need the fixes here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-28Revert "USB: serial: fix hang when opening port"Greg Kroah-Hartman
This reverts commit eba0e3c3a0ba7b96f01cbe997680f6a4401a0bfc. When merged together (usb-linus and usb-next), this fix isn't needed and causes a build error. Revert the commit to solve the build issue. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Ming Lei <tom.leiming@gmail.com> Cc: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-28Merge branch 'usb-linus' into usb-nextGreg Kroah-Hartman
This lets us fix the build error that happens when these two trees are merged together. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-26USB: serial: fix hang when opening portMing Lei
Johan's 'fix use-after-free in TIOCMIWAIT' patchset[1] introduces one bug which can cause kernel hang when opening port. This patch initialized the 'port->delta_msr_wait' waitqueue head to fix the bug which is introduced in 3.9-rc4. [1], http://marc.info/?l=linux-usb&m=136368139627876&w=2 Cc: stable <stable@vger.kernel.org> Signed-off-by: Ming Lei <tom.leiming@gmail.com> Acked-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-25USB: serial: update copyright informationJohan Hovold
Update copyright information. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-25USB: serial: wake up MSR-wait queue on disconnectJohan Hovold
Make sure processes waiting for modem-status changes are woken up at disconnect. This is needed for custom subdriver TIOCMIWAIT-implementations which do not yet handle hangup. Even though processes on the tty-port wait queue are woken up at hangup the wake-up call in usb-serial disconnect is still needed if a woken-up process may go back to sleep (e.g. due to an incomplete TIOCMIWAIT-implementation). If a disconnect occurs after a hangup, any process waiting for changes will not be woken up a second time by the tty-layer as the port will then have been disassociated from the tty. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-25USB: serial: add tiocmiwait subdriver operationJohan Hovold
Add tiocmiwait operation to struct usb_serial_driver. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-25USB: serial: use urb poison to reliably kill trafficJohan Hovold
Use usb_poison_urb to reliably kill all urbs on disconnect and suspend. This way there will be no question that the urbs cannot be resubmitted by buggy subdrivers. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>