summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2016-07-10farsync: fix off-by-one bug in fst_add_oneArnd Bergmann
[ Upstream commit e725a66c0202b5f36c2f9d59d26a65c53bbf21f7 ] gcc-6 finds an out of bounds access in the fst_add_one function when calculating the end of the mmio area: drivers/net/wan/farsync.c: In function 'fst_add_one': drivers/net/wan/farsync.c:418:53: error: index 2 denotes an offset greater than size of 'u8[2][8192] {aka unsigned char[2][8192]}' [-Werror=array-bounds] #define BUF_OFFSET(X) (BFM_BASE + offsetof(struct buf_window, X)) ^ include/linux/compiler-gcc.h:158:21: note: in definition of macro '__compiler_offsetof' __builtin_offsetof(a, b) ^ drivers/net/wan/farsync.c:418:37: note: in expansion of macro 'offsetof' #define BUF_OFFSET(X) (BFM_BASE + offsetof(struct buf_window, X)) ^~~~~~~~ drivers/net/wan/farsync.c:2519:36: note: in expansion of macro 'BUF_OFFSET' + BUF_OFFSET ( txBuffer[i][NUM_TX_BUFFER][0]); ^~~~~~~~~~ The warning is correct, but not critical because this appears to be a write-only variable that is set by each WAN driver but never accessed afterwards. I'm taking the minimal fix here, using the correct pointer by pointing 'mem_end' to the last byte inside of the register area as all other WAN drivers do, rather than the first byte outside of it. An alternative would be to just remove the mem_end member entirely. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-07-10mlx4: add missing braces in verify_qp_parametersArnd Bergmann
[ Upstream commit baefd7015cdb304ce6c94f9679d0486c71954766 ] The implementation of QP paravirtualization back in linux-3.7 included some code that looks very dubious, and gcc-6 has grown smart enough to warn about it: drivers/net/ethernet/mellanox/mlx4/resource_tracker.c: In function 'verify_qp_parameters': drivers/net/ethernet/mellanox/mlx4/resource_tracker.c:3154:5: error: statement is indented as if it were guarded by... [-Werror=misleading-indentation] if (optpar & MLX4_QP_OPTPAR_ALT_ADDR_PATH) { ^~ drivers/net/ethernet/mellanox/mlx4/resource_tracker.c:3144:4: note: ...this 'if' clause, but it is not if (slave != mlx4_master_func_num(dev)) >From looking at the context, I'm reasonably sure that the indentation is correct but that it should have contained curly braces from the start, as the update_gid() function in the same patch correctly does. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 54679e148287 ("mlx4: Implement QP paravirtualization and maintain phys_pkey_cache for smp_snoop") Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-07-10macvtap: always pass ethernet header in linearWillem de Bruijn
[ Upstream commit 8e2ad4113ce4671686740f808ff2795395c39eef ] The stack expects link layer headers in the skb linear section. Macvtap can create skbs with llheader in frags in edge cases: when (IFF_VNET_HDR is off or vnet_hdr.hdr_len < ETH_HLEN) and prepad + len > PAGE_SIZE and vnet_hdr.flags has no or bad csum. Add checks to ensure linear is always at least ETH_HLEN. At this point, len is already ensured to be >= ETH_HLEN. For backwards compatiblity, rounds up short vnet_hdr.hdr_len. This differs from tap and packet, which return an error. Fixes b9fb9ee07e67 ("macvtap: add GSO/csum offload support") Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-07-10qlcnic: Fix mailbox completion handling during spurious interruptRajesh Borundia
[ Upstream commit 819bfe764dceec2f6b4551768453f374b4c60443 ] o While the driver is in the middle of a MB completion processing and it receives a spurious MB interrupt, it is mistaken as a good MB completion interrupt leading to premature completion of the next MB request. Fix the driver to guard against this by checking the current state of MB processing and ignore the spurious interrupt. Also added a stats counter to record this condition. Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-07-10qlcnic: Remove unnecessary usage of atomic_tRajesh Borundia
[ Upstream commit 5bf93251cee1fb66141d1d2eaff86e04a9397bdf ] o atomic_t usage is incorrect as we are not implementing any atomicity. Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-07-10sh_eth: fix RX buffer size alignmentSergei Shtylyov
[ Upstream commit ab8579169b79c062935dade949287113c7c1ba73 ] Both Renesas R-Car and RZ/A1 manuals state that RX buffer length must be a multiple of 32 bytes, while the driver only uses 16 byte granularity... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-07-10sh_eth: fix NULL pointer dereference in sh_eth_ring_format()Sergei Shtylyov
[ Upstream commit c1b7fca65070bfadca94dd53a4e6b71cd4f69715 ] In a low memory situation, if netdev_alloc_skb() fails on a first RX ring loop iteration in sh_eth_ring_format(), 'rxdesc' is still NULL. Avoid kernel oops by adding the 'rxdesc' check after the loop. Reported-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-07-10usbnet: cleanup after bind() in probe()Oliver Neukum
[ Upstream commit 1666984c8625b3db19a9abc298931d35ab7bc64b ] In case bind() works, but a later error forces bailing in probe() in error cases work and a timer may be scheduled. They must be killed. This fixes an error case related to the double free reported in http://www.spinics.net/lists/netdev/msg367669.html and needs to go on top of Linus' fix to cdc-ncm. Signed-off-by: Oliver Neukum <ONeukum@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-07-10cdc_ncm: toggle altsetting to force reset before setupBjørn Mork
[ Upstream commit 48906f62c96cc2cd35753e59310cb70eb08cc6a5 ] Some devices will silently fail setup unless they are reset first. This is necessary even if the data interface is already in altsetting 0, which it will be when the device is probed for the first time. Briefly toggling the altsetting forces a function reset regardless of the initial state. This fixes a setup problem observed on a number of Huawei devices, appearing to operate in NTB-32 mode even if we explicitly set them to NTB-16 mode. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-07-10qmi_wwan: add Sierra Wireless EM74xx device IDBjørn Mork
[ Upstream commit bf13c94ccb33c3182efc92ce4989506a0f541243 ] The MC74xx and EM74xx modules use different IDs by default, according to the Lenovo EM7455 driver for Windows. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-07-10net: qca_spi: clear IFF_TX_SKB_SHARINGStefan Wahren
[ Upstream commit a4690afeb0d2d7ba4d60dfa98a89f3bb1ce60ecd ] ether_setup sets IFF_TX_SKB_SHARING but this is not supported by qca_spi as it modifies the skb on xmit. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Fixes: 291ab06ecf67 (net: qualcomm: new Ethernet over SPI driver for QCA7000) Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-07-10net: qca_spi: Don't clear IFF_BROADCASTStefan Wahren
[ Upstream commit 2b70bad23c89b121a3e4a00f8968d14ebb78887d ] Currently qcaspi_netdev_setup accidentally clears IFF_BROADCAST. So fix this by keeping the flags from ether_setup. Reported-by: Michael Heimpold <michael.heimpold@i2se.com> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Fixes: 291ab06ecf67 (net: qualcomm: new Ethernet over SPI driver for QCA7000) Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-07-10net: jme: fix suspend/resume on JMC260Diego Viola
[ Upstream commit ee50c130c82175eaa0820c96b6d3763928af2241 ] The JMC260 network card fails to suspend/resume because the call to jme_start_irq() was too early, moving the call to jme_start_irq() after the call to jme_reset_link() makes it work. Prior this change suspend/resume would fail unless /sys/power/pm_async=0 was explicitly specified. Relevant bug report: https://bugzilla.kernel.org/show_bug.cgi?id=112351 Signed-off-by: Diego Viola <diego.viola@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-07-10drm/radeon: add a dpm quirk for all R7 370 partsAlex Deucher
[ Upstream commit 0e5585dc870af947fab2af96a88c2d8b4270247c ] Higher mclk values are not stable due to a bug somewhere. Limit them for now. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-07-10drm/radeon: add a dpm quirk for sapphire Dual-X R7 370 2G D5Alex Deucher
[ Upstream commit f971f2263deaa4a441e377b385c11aee0f3b3f9a ] bug: https://bugs.freedesktop.org/show_bug.cgi?id=94692 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-07-10drm/udl: Use unlocked gem unreferencingDaniel Vetter
[ Upstream commit 72b9ff0612ad8fc969b910cd00ac16b57a1a9ba4 ] For drm_gem_object_unreference callers are required to hold dev->struct_mutex, which these paths don't. Enforcing this requirement has become a bit more strict with commit ef4c6270bf2867e2f8032e9614d1a8cfc6c71663 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Thu Oct 15 09:36:25 2015 +0200 drm/gem: Check locking in drm_gem_object_unreference Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-07-10drm: Fix for DP CTS test 4.2.2.5 - I2C DEFER handlingTodd Previte
[ Upstream commit 396aa4451e865d1e36d6d4e0686a9303c038b606 ] For test 4.2.2.5 to pass per the Link CTS Core 1.2 rev1.1 spec, the source device must attempt at least 7 times to read the EDID when it receives an I2C defer. The normal DRM code makes only 7 retries, regardless of whether or not the response is a native defer or an I2C defer. Test 4.2.2.5 fails since there are native defers interspersed with the I2C defers which results in less than 7 EDID read attempts. The solution is to add the numer of defers to the retry counter when an I2C DEFER is returned such that another read attempt will be made. This situation should normally only occur in compliance testing, however, as a worse case real-world scenario, it would result in 13 attempts ( 6 native defers, 7 I2C defers) for a single transaction to complete. The net result is a slightly slower response to an EDID read that shouldn't significantly impact overall performance. V2: - Added a check on the number of I2C Defers to limit the number of times that the retries variable will be decremented. This is to address review feedback regarding possible infinite loops from misbehaving sink devices. V3: - Fixed the limit value to 7 instead of 8 to get the correct retry count. - Combined the increment of the defer count into the if-statement V4: - Removed i915 tag from subject as the patch is not i915-specific V5: - Updated the for-loop to add the number of i2c defers to the retry counter such that the correct number of retry attempts will be made Signed-off-by: Todd Previte <tprevite@gmail.com> Cc: dri-devel@lists.freedesktop.org Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-07-10hwmon: (max1111) Return -ENODEV from max1111_read_channel if not instantiatedGuenter Roeck
[ Upstream commit 3c2e2266a5bd2d1cef258e6e54dca1d99946379f ] arm:pxa_defconfig can result in the following crash if the max1111 driver is not instantiated. Unhandled fault: page domain fault (0x01b) at 0x00000000 pgd = c0004000 [00000000] *pgd=00000000 Internal error: : 1b [#1] PREEMPT ARM Modules linked in: CPU: 0 PID: 300 Comm: kworker/0:1 Not tainted 4.5.0-01301-g1701f680407c #10 Hardware name: SHARP Akita Workqueue: events sharpsl_charge_toggle task: c390a000 ti: c391e000 task.ti: c391e000 PC is at max1111_read_channel+0x20/0x30 LR is at sharpsl_pm_pxa_read_max1111+0x2c/0x3c pc : [<c03aaab0>] lr : [<c0024b50>] psr: 20000013 ... [<c03aaab0>] (max1111_read_channel) from [<c0024b50>] (sharpsl_pm_pxa_read_max1111+0x2c/0x3c) [<c0024b50>] (sharpsl_pm_pxa_read_max1111) from [<c00262e0>] (spitzpm_read_devdata+0x5c/0xc4) [<c00262e0>] (spitzpm_read_devdata) from [<c0024094>] (sharpsl_check_battery_temp+0x78/0x110) [<c0024094>] (sharpsl_check_battery_temp) from [<c0024f9c>] (sharpsl_charge_toggle+0x48/0x110) [<c0024f9c>] (sharpsl_charge_toggle) from [<c004429c>] (process_one_work+0x14c/0x48c) [<c004429c>] (process_one_work) from [<c0044618>] (worker_thread+0x3c/0x5d4) [<c0044618>] (worker_thread) from [<c004a238>] (kthread+0xd0/0xec) [<c004a238>] (kthread) from [<c000a670>] (ret_from_fork+0x14/0x24) This can occur because the SPI controller driver (SPI_PXA2XX) is built as module and thus not necessarily loaded. While building SPI_PXA2XX into the kernel would make the problem disappear, it appears prudent to ensure that the driver is instantiated before accessing its data structures. Cc: Arnd Bergmann <arnd@arndb.de> Cc: stable@vger.kernel.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-07-10mtip32xx: Fix broken service thread handlingAsai Thambi SP
[ Upstream commit 1b899eb4833d3394f37272d38b4b1a26eac30feb ] commit cfc05bd31384c4898bf2437a4de5557f3cf9803a upstream. Service thread does not detect the need for taskfile error hanlding. Fixed the flag condition to process taskfile error. Signed-off-by: Selvan Mani <smani@micron.com> Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com> Signed-off-by: Jens Axboe <axboe@fb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-07-10mtip32xx: Fix for rmmod crash when drive is in FTL rebuildAsai Thambi SP
[ Upstream commit 59cf70e236c96594d9f1e065755d8fce9df5356b ] When FTL rebuild is in progress, alloc_disk() initializes the disk but device node will be created by add_disk() only after successful completion of FTL rebuild. So, skip deletion of device node in removal path when FTL rebuild is in progress. Signed-off-by: Selvan Mani <smani@micron.com> Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com> Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe <axboe@fb.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-07-108250: use callbacks to access UART_DLL/UART_DLMSebastian Frias
[ Upstream commit 0b41ce991052022c030fd868e03877700220b090 ] Some UART HW has a single register combining UART_DLL/UART_DLM (this was probably forgotten in the change that introduced the callbacks, commit b32b19b8ffc05cbd3bf91c65e205f6a912ca15d9) Fixes: b32b19b8ffc0 ("[SERIAL] 8250: set divisor register correctly ...") Signed-off-by: Sebastian Frias <sf84@laposte.net> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-07-10HID: logitech: fix Dual Action gamepad supportGrazvydas Ignotas
[ Upstream commit 5d74325a2201376a95520a4a38a1ce2c65761c49 ] The patch that added Logitech Dual Action gamepad support forgot to update the special driver list for the device. This caused the logitech driver not to probe unless kernel module load order was favorable. Update the special driver list to fix it. Thanks to Simon Wood for the idea. Cc: Vitaly Katraew <zawullon@gmail.com> Fixes: 56d0c8b7c8fb ("HID: add support for Logitech Dual Action gamepads") Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-07-10tpm: fix the cleanup of struct tpm_chipJarkko Sakkinen
[ Upstream commit 8e0ee3c9faed7ca68807ea45141775856c438ac0 ] If the initialization fails before tpm_chip_register(), put_device() will be not called, which causes release callback not to be called. This patch fixes the issue by adding put_device() to devres list of the parent device. Fixes: 313d21eeab ("tpm: device class for tpm") Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> cc: stable@vger.kernel.org Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-07-10dm snapshot: disallow the COW and origin devices from being identicalDingXiang
[ Upstream commit 4df2bf466a9c9c92f40d27c4aa9120f4e8227bfc ] Otherwise loading a "snapshot" table using the same device for the origin and COW devices, e.g.: echo "0 20971520 snapshot 253:3 253:3 P 8" | dmsetup create snap will trigger: BUG: unable to handle kernel NULL pointer dereference at 0000000000000098 [ 1958.979934] IP: [<ffffffffa040efba>] dm_exception_store_set_chunk_size+0x7a/0x110 [dm_snapshot] [ 1958.989655] PGD 0 [ 1958.991903] Oops: 0000 [#1] SMP ... [ 1959.059647] CPU: 9 PID: 3556 Comm: dmsetup Tainted: G IO 4.5.0-rc5.snitm+ #150 ... [ 1959.083517] task: ffff8800b9660c80 ti: ffff88032a954000 task.ti: ffff88032a954000 [ 1959.091865] RIP: 0010:[<ffffffffa040efba>] [<ffffffffa040efba>] dm_exception_store_set_chunk_size+0x7a/0x110 [dm_snapshot] [ 1959.104295] RSP: 0018:ffff88032a957b30 EFLAGS: 00010246 [ 1959.110219] RAX: 0000000000000000 RBX: 0000000000000008 RCX: 0000000000000001 [ 1959.118180] RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffff880329334a00 [ 1959.126141] RBP: ffff88032a957b50 R08: 0000000000000000 R09: 0000000000000001 [ 1959.134102] R10: 000000000000000a R11: f000000000000000 R12: ffff880330884d80 [ 1959.142061] R13: 0000000000000008 R14: ffffc90001c13088 R15: ffff880330884d80 [ 1959.150021] FS: 00007f8926ba3840(0000) GS:ffff880333440000(0000) knlGS:0000000000000000 [ 1959.159047] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1959.165456] CR2: 0000000000000098 CR3: 000000032f48b000 CR4: 00000000000006e0 [ 1959.173415] Stack: [ 1959.175656] ffffc90001c13040 ffff880329334a00 ffff880330884ed0 ffff88032a957bdc [ 1959.183946] ffff88032a957bb8 ffffffffa040f225 ffff880329334a30 ffff880300000000 [ 1959.192233] ffffffffa04133e0 ffff880329334b30 0000000830884d58 00000000569c58cf [ 1959.200521] Call Trace: [ 1959.203248] [<ffffffffa040f225>] dm_exception_store_create+0x1d5/0x240 [dm_snapshot] [ 1959.211986] [<ffffffffa040d310>] snapshot_ctr+0x140/0x630 [dm_snapshot] [ 1959.219469] [<ffffffffa0005c44>] ? dm_split_args+0x64/0x150 [dm_mod] [ 1959.226656] [<ffffffffa0005ea7>] dm_table_add_target+0x177/0x440 [dm_mod] [ 1959.234328] [<ffffffffa0009203>] table_load+0x143/0x370 [dm_mod] [ 1959.241129] [<ffffffffa00090c0>] ? retrieve_status+0x1b0/0x1b0 [dm_mod] [ 1959.248607] [<ffffffffa0009e35>] ctl_ioctl+0x255/0x4d0 [dm_mod] [ 1959.255307] [<ffffffff813304e2>] ? memzero_explicit+0x12/0x20 [ 1959.261816] [<ffffffffa000a0c3>] dm_ctl_ioctl+0x13/0x20 [dm_mod] [ 1959.268615] [<ffffffff81215eb6>] do_vfs_ioctl+0xa6/0x5c0 [ 1959.274637] [<ffffffff81120d2f>] ? __audit_syscall_entry+0xaf/0x100 [ 1959.281726] [<ffffffff81003176>] ? do_audit_syscall_entry+0x66/0x70 [ 1959.288814] [<ffffffff81216449>] SyS_ioctl+0x79/0x90 [ 1959.294450] [<ffffffff8167e4ae>] entry_SYSCALL_64_fastpath+0x12/0x71 ... [ 1959.323277] RIP [<ffffffffa040efba>] dm_exception_store_set_chunk_size+0x7a/0x110 [dm_snapshot] [ 1959.333090] RSP <ffff88032a957b30> [ 1959.336978] CR2: 0000000000000098 [ 1959.344121] ---[ end trace b049991ccad1169e ]--- Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1195899 Cc: stable@vger.kernel.org Signed-off-by: Ding Xiang <dingxiang@huawei.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-07-10PCI: Allow a NULL "parent" pointer in pci_bus_assign_domain_nr()Krzysztof Hałasa
[ Upstream commit 54c6e2dd00c313d0add58e5befe62fe6f286d03b ] pci_create_root_bus() passes a "parent" pointer to pci_bus_assign_domain_nr(). When CONFIG_PCI_DOMAINS_GENERIC is defined, pci_bus_assign_domain_nr() dereferences that pointer. Many callers of pci_create_root_bus() supply a NULL "parent" pointer, which leads to a NULL pointer dereference error. 7c674700098c ("PCI: Move domain assignment from arm64 to generic code") moved the "parent" dereference from arm64 to generic code. Only arm64 used that code (because only arm64 defined CONFIG_PCI_DOMAINS_GENERIC), and it always supplied a valid "parent" pointer. Other arches supplied NULL "parent" pointers but didn't defined CONFIG_PCI_DOMAINS_GENERIC, so they used a no-op version of pci_bus_assign_domain_nr(). 8c7d14746abc ("ARM/PCI: Move to generic PCI domains") defined CONFIG_PCI_DOMAINS_GENERIC on ARM, and many ARM platforms use pci_common_init(), which supplies a NULL "parent" pointer. These platforms (cns3xxx, dove, footbridge, iop13xx, etc.) crash with a NULL pointer dereference like this while probing PCI: Unable to handle kernel NULL pointer dereference at virtual address 000000a4 PC is at pci_bus_assign_domain_nr+0x10/0x84 LR is at pci_create_root_bus+0x48/0x2e4 Kernel panic - not syncing: Attempted to kill init! [bhelgaas: changelog, add "Reported:" and "Fixes:" tags] Reported: http://forum.doozan.com/read.php?2,17868,22070,quote=1 Fixes: 8c7d14746abc ("ARM/PCI: Move to generic PCI domains") Fixes: 7c674700098c ("PCI: Move domain assignment from arm64 to generic code") Signed-off-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> CC: stable@vger.kernel.org # v4.0+ Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-07-10USB: don't free bandwidth_mutex too earlyAlan Stern
[ Upstream commit ab2a4bf83902c170d29ba130a8abb5f9d90559e1 ] The USB core contains a bug that can show up when a USB-3 host controller is removed. If the primary (USB-2) hcd structure is released before the shared (USB-3) hcd, the core will try to do a double-free of the common bandwidth_mutex. The problem was described in graphical form by Chung-Geol Kim, who first reported it: ================================================= At *remove USB(3.0) Storage sequence <1> --> <5> ((Problem Case)) ================================================= VOLD ------------------------------------|------------ (uevent) ________|_________ |<1> | |dwc3_otg_sm_work | |usb_put_hcd | |peer_hcd(kref=2)| |__________________| ________|_________ |<2> | |New USB BUS #2 | | | |peer_hcd(kref=1) | | | --(Link)-bandXX_mutex| | |__________________| | ___________________ | |<3> | | |dwc3_otg_sm_work | | |usb_put_hcd | | |primary_hcd(kref=1)| | |___________________| | _________|_________ | |<4> | | |New USB BUS #1 | | |hcd_release | | |primary_hcd(kref=0)| | | | | |bandXX_mutex(free) |<- |___________________| (( VOLD )) ______|___________ |<5> | | SCSI | |usb_put_hcd | |peer_hcd(kref=0) | |*hcd_release | |bandXX_mutex(free*)|<- double free |__________________| ================================================= This happens because hcd_release() frees the bandwidth_mutex whenever it sees a primary hcd being released (which is not a very good idea in any case), but in the course of releasing the primary hcd, it changes the pointers in the shared hcd in such a way that the shared hcd will appear to be primary when it gets released. This patch fixes the problem by changing hcd_release() so that it deallocates the bandwidth_mutex only when the _last_ hcd structure referencing it is released. The patch also removes an unnecessary test, so that when an hcd is released, both the shared_hcd and primary_hcd pointers in the hcd's peer will be cleared. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Chung-Geol Kim <chunggeol.kim@samsung.com> Tested-by: Chung-Geol Kim <chunggeol.kim@samsung.com> CC: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-07-10HID: hiddev: validate num_values for HIDIOCGUSAGES, HIDIOCSUSAGES commandsScott Bauer
[ Upstream commit 93a2001bdfd5376c3dc2158653034c20392d15c5 ] This patch validates the num_values parameter from userland during the HIDIOCGUSAGES and HIDIOCSUSAGES commands. Previously, if the report id was set to HID_REPORT_ID_UNKNOWN, we would fail to validate the num_values parameter leading to a heap overflow. Cc: stable@vger.kernel.org Signed-off-by: Scott Bauer <sbauer@plzdonthack.me> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-07-10Input: vmmouse - remove port reservationSinclair Yeh
[ Upstream commit 60842ef8128e7bf58c024814cd0dc14319232b6c ] The VMWare EFI BIOS will expose port 0x5658 as an ACPI resource. This causes the port to be reserved by the APCI module as the system comes up, making it unavailable to be reserved again by other drivers, thus preserving this VMWare port for special use in a VMWare guest. This port is designed to be shared among multiple VMWare services, such as the VMMOUSE. Because of this, VMMOUSE should not try to reserve this port on its own. The VMWare non-EFI BIOS does not do this to preserve compatibility with existing/legacy VMs. It is known that there is small chance a VM may be configured such that these ports get reserved by other non-VMWare devices, and if this ever happens, the result is undefined. Signed-off-by: Sinclair Yeh <syeh@vmware.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Cc: <stable@vger.kernel.org> # 4.1- Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-07-10drm/nouveau: fix for disabled fbdev emulationDmitrii Tcvetkov
[ Upstream commit 52dfcc5ccfbb6697ac3cac7f7ff1e712760e1216 ] Hello, after this commit: commit f045f459d925138fe7d6193a8c86406bda7e49da Author: Ben Skeggs <bskeggs@redhat.com> Date: Thu Jun 2 12:23:31 2016 +1000 drm/nouveau/fbcon: fix out-of-bounds memory accesses kernel started to oops when loading nouveau module when using GTX 780 Ti video adapter. This patch fixes the problem. Bug report: https://bugzilla.kernel.org/show_bug.cgi?id=120591 Signed-off-by: Dmitrii Tcvetkov <demfloro@demfloro.ru> Suggested-by: Ilia Mirkin <imirkin@alum.mit.edu> Fixes: f045f459d925 ("nouveau_fbcon_init()") Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-07-10Input: elantech - add more IC body types to the listDmitry Torokhov
[ Upstream commit 226ba707744a51acb4244724e09caacb1d96aed9 ] The touchpad in HP Pavilion 14-ab057ca reports it's version as 12 and according to Elan both 11 and 12 are valid IC types and should be identified as hw_version 4. Reported-by: Patrick Lessard <Patrick.Lessard@cogeco.com> Tested-by: Patrick Lessard <Patrick.Lessard@cogeco.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-07-10Input: wacom_w8001 - w8001_MAX_LENGTH should be 13Ping Cheng
[ Upstream commit 12afb34400eb2b301f06b2aa3535497d14faee59 ] Somehow the patch that added two-finger touch support forgot to update W8001_MAX_LENGTH from 11 to 13. Signed-off-by: Ping Cheng <pingc@wacom.com> Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-07-10xen/pciback: Fix conf_space read/write overlap check.Andrey Grodzovsky
[ Upstream commit 02ef871ecac290919ea0c783d05da7eedeffc10e ] Current overlap check is evaluating to false a case where a filter field is fully contained (proper subset) of a r/w request. This change applies classical overlap check instead to include all the scenarios. More specifically, for (Hilscher GmbH CIFX 50E-DP(M/S)) device driver the logic is such that the entire confspace is read and written in 4 byte chunks. In this case as an example, CACHE_LINE_SIZE, LATENCY_TIMER and PCI_BIST are arriving together in one call to xen_pcibk_config_write() with offset == 0xc and size == 4. With the exsisting overlap check the LATENCY_TIMER field (offset == 0xd, length == 1) is fully contained in the write request and hence is excluded from write, which is incorrect. Signed-off-by: Andrey Grodzovsky <andrey2805@gmail.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: Jan Beulich <JBeulich@suse.com> Cc: <stable@vger.kernel.org> Signed-off-by: David Vrabel <david.vrabel@citrix.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-07-10can: fix oops caused by wrong rtnl dellink usageOliver Hartkopp
[ Upstream commit 25e1ed6e64f52a692ba3191c4fde650aab3ecc07 ] For 'real' hardware CAN devices the netlink interface is used to set CAN specific communication parameters. Real CAN hardware can not be created nor removed with the ip tool ... This patch adds a private dellink function for the CAN device driver interface that does just nothing. It's a follow up to commit 993e6f2fd ("can: fix oops caused by wrong rtnl newlink usage") but for dellink. Reported-by: ajneu <ajneu1@gmail.com> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Cc: <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-07-10can: fix handling of unmodifiable configuration options fixOliver Hartkopp
[ Upstream commit bce271f255dae8335dc4d2ee2c4531e09cc67f5a ] With upstream commit bb208f144cf3f59 (can: fix handling of unmodifiable configuration options) a new can_validate() function was introduced. When invoking 'ip link set can0 type can' without any configuration data can_validate() tries to validate the content without taking into account that there's totally no content. This patch adds a check for missing content. Reported-by: ajneu <ajneu1@gmail.com> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Cc: <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-07-10ubi: Make recover_peb power cut awareRichard Weinberger
[ Upstream commit 972228d87445dc46c0a01f5f3de673ac017626f7 ] recover_peb() was never power cut aware, if a power cut happened right after writing the VID header upon next attach UBI would blindly use the new partial written PEB and all data from the old PEB is lost. In order to make recover_peb() power cut aware, write the new VID with a proper crc and copy_flag set such that the UBI attach process will detect whether the new PEB is completely written or not. We cannot directly use ubi_eba_atomic_leb_change() since we'd have to unlock the LEB which is facing a write error. Cc: stable@vger.kernel.org Reported-by: Jörg Pfähler <pfaehler@isse.de> Reviewed-by: Jörg Pfähler <pfaehler@isse.de> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-07-10pinctrl: single: Fix missing flush of posted write for a wakeirqTony Lindgren
[ Upstream commit 0ac3c0a4025f41748a083bdd4970cb3ede802b15 ] With many repeated suspend resume cycles, the pin specific wakeirq may not always work on omaps. This is because the write to enable the pin interrupt may not have reached the device over the interconnect before suspend happens. Let's fix the issue with a flush of posted write with a readback. Cc: stable@vger.kernel.org Reported-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-07-10pinctrl: imx: Do not treat a PIN without MUX register as an errorAlexander Shiyan
[ Upstream commit ba562d5e54fd3136bfea0457add3675850247774 ] Some PINs do not have a MUX register, it is not an error. It is necessary to allow the continuation of the PINs configuration, otherwise the whole PIN-group will be configured incorrectly. Cc: stable@vger.kernel.org Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-07-10drm: atmel-hlcdc: actually disable scaling when no scaling is requiredBoris Brezillon
[ Upstream commit 1b7e38b92b0bbd363369f5160f13f4d26140972d ] The driver is only enabling scaling, but never disabling it, thus, if you enable the scaling feature once it stays enabled forever. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Reported-by: Alex Vazquez <avazquez.dev@gmail.com> Reviewed-by: Nicolas Ferre <nicolas.ferre@atmel.com> Fixes: 1a396789f65a ("drm: add Atmel HLCDC Display Controller support") Cc: <stable@vger.kernel.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-07-10can: at91_can: RX queue could get stuck at high bus loadWolfgang Grandegger
[ Upstream commit 43200a4480cbbe660309621817f54cbb93907108 ] At high bus load it could happen that "at91_poll()" enters with all RX message boxes filled up. If then at the end the "quota" is exceeded as well, "rx_next" will not be reset to the first RX mailbox and hence the interrupts remain disabled. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Tested-by: Amr Bekhit <amrbekhit@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-07-10can: c_can: Update D_CAN TX and RX functions to 32 bit - fix Altera Cyclone ↵Thor Thayer
access [ Upstream commit 427460c83cdf55069eee49799a0caef7dde8df69 ] When testing CAN write floods on Altera's CycloneV, the first 2 bytes are sometimes 0x00, 0x00 or corrupted instead of the values sent. Also observed bytes 4 & 5 were corrupted in some cases. The D_CAN Data registers are 32 bits and changing from 16 bit writes to 32 bit writes fixes the problem. Testing performed on Altera CycloneV (D_CAN). Requesting tests on other C_CAN & D_CAN platforms. Reported-by: Richard Andrysek <richard.andrysek@gomtec.de> Signed-off-by: Thor Thayer <tthayer@opensource.altera.com> Cc: <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-07-10IB/mlx4: Properly initialize GRH TClass and FlowLabel in AHsJason Gunthorpe
[ Upstream commit 8c5122e45a10a9262f872b53f151a592e870f905 ] When this code was reworked for IBoE support the order of assignments for the sl_tclass_flowlabel got flipped around resulting in TClass & FlowLabel being permanently set to 0 in the packet headers. This breaks IB routers that rely on these headers, but only affects kernel users - libmlx4 does this properly for user space. Cc: stable@vger.kernel.org Fixes: fa417f7b520e ("IB/mlx4: Add support for IBoE") Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-07-10memory: omap-gpmc: Fix omap gpmc EXTRADELAY timingOcquidant, Sebastien
[ Upstream commit 8f50b8e57442d28e41bb736c173d8a2490549a82 ] In the omap gpmc driver it can be noticed that GPMC_CONFIG4_OEEXTRADELAY is overwritten by the WEEXTRADELAY value from the device tree and GPMC_CONFIG4_WEEXTRADELAY is not updated by the value from the device tree. As a consequence, the memory accesses cannot be configured properly when the extra delay are needed for OE and WE. Fix the update of GPMC_CONFIG4_WEEXTRADELAY with the value from the device tree file and prevents GPMC_CONFIG4_OEXTRADELAY being overwritten by the WEXTRADELAY value from the device tree. Cc: stable@vger.kernel.org Signed-off-by: Ocquidant, Sebastien <sebastienocquidant@eaton.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-07-10base: make module_create_drivers_dir race-freeJiri Slaby
[ Upstream commit 7e1b1fc4dabd6ec8e28baa0708866e13fa93c9b3 ] Modules which register drivers via standard path (driver_register) in parallel can cause a warning: WARNING: CPU: 2 PID: 3492 at ../fs/sysfs/dir.c:31 sysfs_warn_dup+0x62/0x80 sysfs: cannot create duplicate filename '/module/saa7146/drivers' Modules linked in: hexium_gemini(+) mxb(+) ... ... Call Trace: ... [<ffffffff812e63a2>] sysfs_warn_dup+0x62/0x80 [<ffffffff812e6487>] sysfs_create_dir_ns+0x77/0x90 [<ffffffff8140f2c4>] kobject_add_internal+0xb4/0x340 [<ffffffff8140f5b8>] kobject_add+0x68/0xb0 [<ffffffff8140f631>] kobject_create_and_add+0x31/0x70 [<ffffffff8157a703>] module_add_driver+0xc3/0xd0 [<ffffffff8155e5d4>] bus_add_driver+0x154/0x280 [<ffffffff815604c0>] driver_register+0x60/0xe0 [<ffffffff8145bed0>] __pci_register_driver+0x60/0x70 [<ffffffffa0273e14>] saa7146_register_extension+0x64/0x90 [saa7146] [<ffffffffa0033011>] hexium_init_module+0x11/0x1000 [hexium_gemini] ... As can be (mostly) seen, driver_register causes this call sequence: -> bus_add_driver -> module_add_driver -> module_create_drivers_dir The last one creates "drivers" directory in /sys/module/<...>. When this is done in parallel, the directory is attempted to be created twice at the same time. This can be easily reproduced by loading mxb and hexium_gemini in parallel: while :; do modprobe mxb & modprobe hexium_gemini wait rmmod mxb hexium_gemini saa7146_vv saa7146 done saa7146 calls pci_register_driver for both mxb and hexium_gemini, which means /sys/module/saa7146/drivers is to be created for both of them. Fix this by a new mutex in module_create_drivers_dir which makes the test-and-create "drivers" dir atomic. I inverted the condition and removed 'return' to avoid multiple unlocks or a goto. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Fixes: fe480a2675ed (Modules: only add drivers/ direcory if needed) Cc: v2.6.21+ <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-07-10drm/dp/mst: Always clear proposed vcpi table for port.Andrey Grodzovsky
[ Upstream commit fd2d2bac6e79b0be91ab86a6075a0c46ffda658a ] Not clearing mst manager's proposed vcpis table for destroyed connectors when the manager is stopped leaves it pointing to unrefernced memory, this causes pagefault when the manager is restarted when plugging back a branch. Fixes: 91a25e463130 ("drm/dp/mst: deallocate payload on port destruction") Signed-off-by: Andrey Grodzovsky <Andrey.Grodzovsky@amd.com> Reviewed-by: Lyude <cpaul@redhat.com> Cc: stable@vger.kernel.org Cc: Mykola Lysenko <Mykola.Lysenko@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-07-10drm/i915/ilk: Don't disable SSC source if it's in useLyude
[ Upstream commit 476490a945e1f0f6bd58e303058d2d8ca93a974c ] Thanks to Ville Syrjälä for pointing me towards the cause of this issue. Unfortunately one of the sideaffects of having the refclk for a DPLL set to SSC is that as long as it's set to SSC, the GPU will prevent us from powering down any of the pipes or transcoders using it. A couple of BIOSes enable SSC in both PCH_DREF_CONTROL and in the DPLL configurations. This causes issues on the first modeset, since we don't expect SSC to be left on and as a result, can't successfully power down the pipes or the transcoders using it. Here's an example from this Dell OptiPlex 990: [drm:intel_modeset_init] SSC enabled by BIOS, overriding VBT which says disabled [drm:intel_modeset_init] 2 display pipes available. [drm:intel_update_cdclk] Current CD clock rate: 400000 kHz [drm:intel_update_max_cdclk] Max CD clock rate: 400000 kHz [drm:intel_update_max_cdclk] Max dotclock rate: 360000 kHz vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [drm:intel_crt_reset] crt adpa set to 0xf40000 [drm:intel_dp_init_connector] Adding DP connector on port C [drm:intel_dp_aux_init] registering DPDDC-C bus for card0-DP-1 [drm:ironlake_init_pch_refclk] has_panel 0 has_lvds 0 has_ck505 0 [drm:ironlake_init_pch_refclk] Disabling SSC entirely … later we try committing the first modeset … [drm:intel_dump_pipe_config] [CRTC:26][modeset] config ffff88041b02e800 for pipe A [drm:intel_dump_pipe_config] cpu_transcoder: A … [drm:intel_dump_pipe_config] dpll_hw_state: dpll: 0xc4016001, dpll_md: 0x0, fp0: 0x20e08, fp1: 0x30d07 [drm:intel_dump_pipe_config] planes on this crtc [drm:intel_dump_pipe_config] STANDARD PLANE:23 plane: 0.0 idx: 0 enabled [drm:intel_dump_pipe_config] FB:42, fb = 800x600 format = 0x34325258 [drm:intel_dump_pipe_config] scaler:0 src (0, 0) 800x600 dst (0, 0) 800x600 [drm:intel_dump_pipe_config] CURSOR PLANE:25 plane: 0.1 idx: 1 disabled, scaler_id = 0 [drm:intel_dump_pipe_config] STANDARD PLANE:27 plane: 0.1 idx: 2 disabled, scaler_id = 0 [drm:intel_get_shared_dpll] CRTC:26 allocated PCH DPLL A [drm:intel_get_shared_dpll] using PCH DPLL A for pipe A [drm:ilk_audio_codec_disable] Disable audio codec on port C, pipe A [drm:intel_disable_pipe] disabling pipe A ------------[ cut here ]------------ WARNING: CPU: 1 PID: 130 at drivers/gpu/drm/i915/intel_display.c:1146 intel_disable_pipe+0x297/0x2d0 [i915] pipe_off wait timed out … ---[ end trace 94fc8aa03ae139e8 ]--- [drm:intel_dp_link_down] [drm:ironlake_crtc_disable [i915]] *ERROR* failed to disable transcoder A Later modesets succeed since they reset the DPLL's configuration anyway, but this is enough to get stuck with a big fat warning in dmesg. A better solution would be to add refcounts for the SSC source, but for now leaving the source clock on should suffice. Changes since v4: - Fix calculation of final for systems with LVDS panels (fixes BUG() on CI test suite) Changes since v3: - Move temp variable into loop - Move checks for using_ssc_source to after we've figured out has_ck505 - Add using_ssc_source to debug output Changes since v2: - Fix debug output for when we disable the CPU source Changes since v1: - Leave the SSC source clock on instead of just shutting it off on all of the DPLL configurations. Cc: stable@vger.kernel.org Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Lyude <cpaul@redhat.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1465916649-10228-1-git-send-email-cpaul@redhat.com Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-07-10power_supply: power_supply_read_temp only if use_cnt > 0Rhyland Klein
[ Upstream commit 5bc28b93a36e3cb3acc2870fb75cb6ffb182fece ] Change power_supply_read_temp() to use power_supply_get_property() so that it will check the use_cnt and ensure it is > 0. The use_cnt will be incremented at the end of __power_supply_register, so this will block to case where get_property can be called before the supply is fully registered. This fixes the issue show in the stack below: [ 1.452598] power_supply_read_temp+0x78/0x80 [ 1.458680] thermal_zone_get_temp+0x5c/0x11c [ 1.464765] thermal_zone_device_update+0x34/0xb4 [ 1.471195] thermal_zone_device_register+0x87c/0x8cc [ 1.477974] __power_supply_register+0x364/0x424 [ 1.484317] power_supply_register_no_ws+0x10/0x18 [ 1.490833] bq27xxx_battery_setup+0x10c/0x164 [ 1.497003] bq27xxx_battery_i2c_probe+0xd0/0x1b0 [ 1.503435] i2c_device_probe+0x174/0x240 [ 1.509172] driver_probe_device+0x1fc/0x29c [ 1.515167] __driver_attach+0xa4/0xa8 [ 1.520643] bus_for_each_dev+0x58/0x98 [ 1.526204] driver_attach+0x20/0x28 [ 1.531505] bus_add_driver+0x1c8/0x22c [ 1.537067] driver_register+0x68/0x108 [ 1.542630] i2c_register_driver+0x38/0x7c [ 1.548457] bq27xxx_battery_i2c_driver_init+0x18/0x20 [ 1.555321] do_one_initcall+0x38/0x12c [ 1.560886] kernel_init_freeable+0x148/0x1ec [ 1.566972] kernel_init+0x10/0xfc [ 1.572101] ret_from_fork+0x10/0x40 Also make the same change to ps_get_max_charge_cntl_limit() and ps_get_cur_chrage_cntl_limit() to be safe. Lastly, change the return value of power_supply_get_property() to -EAGAIN from -ENODEV if use_cnt <= 0. Fixes: 297d716f6260 ("power_supply: Change ownership from driver to core") Cc: stable@vger.kernel.org Signed-off-by: Rhyland Klein <rklein@nvidia.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Sebastian Reichel <sre@kernel.org> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-07-10spi: sunxi: fix transfer timeoutMichal Suchanek
[ Upstream commit 719bd6542044efd9b338a53dba1bef45f40ca169 ] The trasfer timeout is fixed at 1000 ms. Reading a 4Mbyte flash over 1MHz SPI bus takes way longer than that. Calculate the timeout from the actual time the transfer is supposed to take and multiply by 2 for good measure. Signed-off-by: Michal Suchanek <hramrach@gmail.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-07-10spi: sun4i: fix FIFO limitMichal Suchanek
[ Upstream commit 6d9fe44bd73d567d04d3a68a2d2fa521ab9532f2 ] When testing SPI without DMA I noticed that filling the FIFO on the spi controller causes timeout. Always leave room for one byte in the FIFO. Signed-off-by: Michal Suchanek <hramrach@gmail.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-07-10usb: common: otg-fsm: add license to usb-otg-fsmOscar
[ Upstream commit ea1d39a31d3b1b6060b6e83e5a29c069a124c68a ] Fix warning about tainted kernel because usb-otg-fsm has no license. WARNING: with this patch usb-otg-fsm module can be loaded but then the kernel will hang. Tested with a udoo quad board. Cc: <stable@vger.kernel.org> #v4.1+ Signed-off-by: Oscar <oscar@naiandei.net> Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
2016-07-10drm/radeon: fix asic initialization for virtualized environmentsAlex Deucher
[ Upstream commit 05082b8bbd1a0ffc74235449c4b8930a8c240f85 ] When executing in a PCI passthrough based virtuzliation environment, the hypervisor will usually attempt to send a PCIe bus reset signal to the ASIC when the VM reboots. In this scenario, the card is not correctly initialized, but we still consider it to be posted. Therefore, in a passthrough based environemnt we should always post the card to guarantee it is in a good state for driver initialization. Ported from amdgpu commit: amdgpu: fix asic initialization for virtualized environments Cc: Andres Rodriguez <andres.rodriguez@amd.com> Cc: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-02-05 12:01:32 +0000