| Age | Commit message (Collapse) | Author |
|---|
|
Rather than having special case code for opportunistically calling
process_csb() and performing a direct submit while holding the engine
spinlock for submitting the request, simply call the tasklet directly.
This allows us to retain the direct submission path, including the CS
draining to allow fast/immediate submissions, without requiring any
duplicated code paths, and most importantly greatly simplifying the
control flow by removing reentrancy. This will enable us to close a few
races in the virtual engines in the next few patches.
The trickiest part here is to ensure that paired operations (such as
schedule_in/schedule_out) remain under consistent locking domains,
e.g. when pulled outside of the engine->active.lock
v2: Use bh kicking, see commit 3c53776e29f8 ("Mark HI and TASKLET
softirq synchronous").
v3: Update engine-reset to be tasklet aware
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201224135544.1713-1-chris@chris-wilson.co.uk
|
|
As we shrink an object, also see if we can prune the dma-resv of idle
fences it is maintaining a reference to.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201223122051.4624-2-chris@chris-wilson.co.uk
|
|
If we want to reuse a fence that is in active use by the GPU, we have to
wait an uncertain amount of time, but if we reuse an inactive fence, we
can change it right away. Loop through the list of available fences
twice, ignoring any active fences on the first pass.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201223122051.4624-1-chris@chris-wilson.co.uk
|
|
Pull the GT clock information [used to derive CS timestamps and PM
interval] under the GT so that is it local to the users. In doing so, we
consolidate the two references for the same information, of which the
runtime-info took note of a potential clock source override and scaling
factors.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201223122359.22562-2-chris@chris-wilson.co.uk
|
|
We assume that both timestamps are driven off the same clock [reported
to userspace as I915_PARAM_CS_TIMESTAMP_FREQUENCY]. Verify that this is
so by reading the timestamp registers around a busywait (on an otherwise
idle engine so there should be no preemptions).
v2: Icelake (not ehl, nor tgl) seems to be using a fixed 80ns interval
for, and only for, CTX_TIMESTAMP -- or it may be GPU frequency and the
test is always running at maximum frequency?. As far as I can tell, this
isolated change in behaviour is undocumented.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201223122359.22562-1-chris@chris-wilson.co.uk
|
|
We just need the context image from the logical state to force eviction
of many contexts, so simplify by avoiding the GEM context container.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201223154509.14155-1-chris@chris-wilson.co.uk
|
|
The caller determines if the failure is an error or not, so avoid
warning when we will try again and succeed. For example,
<7> [111.319321] [drm:intel_guc_fw_upload [i915]] GuC status 0x20
<3> [111.319340] i915 0000:00:02.0: [drm] *ERROR* GuC load failed: status = 0x00000020
<3> [111.319606] i915 0000:00:02.0: [drm] *ERROR* GuC load failed: status: Reset = 0, BootROM = 0x10, UKernel = 0x00, MIA = 0x00, Auth = 0x00
<7> [111.320045] [drm:__uc_init_hw [i915]] GuC fw load failed: -110; will reset and retry 2 more time(s)
<7> [111.322978] [drm:intel_guc_fw_upload [i915]] GuC status 0x8002f0ec
should not have been reported as a _test_ failure, as the GuC was
successfully loaded on the second attempt and the system remained
operational.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2797
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201214100949.11387-2-chris@chris-wilson.co.uk
|
|
By using the double wide cmpxchg64 on 32bit, we can use the same
algorithm on both 32/64b systems.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201211110310.22740-1-chris@chris-wilson.co.uk
|
|
When waiting for the submit, before checking the status of the request,
kick the tasklet to make sure we are processing the submission. This
speeds up submission if we are using any tasklet suppression for
secondary requests.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201222113536.3775-3-chris@chris-wilson.co.uk
|
|
Make sure that the request has been submitted to HW before we begin our
wait. This reduces our reliance on the semaphore yield interrupt driving
the preemption request.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201222113536.3775-2-chris@chris-wilson.co.uk
|
|
Keep on kicking the timeslice in case on the first retirement, it did
not stay idle. This may happen when using semaphore yields.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201222113536.3775-1-chris@chris-wilson.co.uk
|
|
We assume that the contents of the HWSP are lost across suspend, and so
upon resume we must restore critical values such as the timeline seqno.
Keep track of every timeline allocated that uses the HWSP as its storage
and so we can then reset all seqno values by walking that list.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201222104242.10993-1-chris@chris-wilson.co.uk
|
|
Primarily used by selftests, but also by runtime debugging of engine
w/a, is a routine to create a temporarily bound buffer for readback.
Almagamate the duplicated routines into one.
Suggested-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201219020343.22681-2-chris@chris-wilson.co.uk
|
|
Split the definition, construction and updating of the Logical Ring
Context from the execlist submission interface. The LRC is used by the
HW, irrespective of our different submission backends.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201219020343.22681-1-chris@chris-wilson.co.uk
|
|
tasklet_kill() ensures that we _yield_ the processor until a remote
tasklet is completed. However, this leads to a starvation condition as
being at the bottom of the scheduler's runqueue means that anything else
is able to run, including all hogs keeping the tasklet occupied.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201220134858.10510-1-chris@chris-wilson.co.uk
|
|
Since we allow removing the timeline map at runtime, there is a risk
that rq->hwsp points into a stale page. To control that risk, we hold
the RCU read lock while reading *rq->hwsp, but we missed a couple of
important barriers. First, the unpinning / removal of the timeline map
must be after all RCU readers into that map are complete, i.e. after an
rcu barrier (in this case courtesy of call_rcu()). Secondly, we must
make sure that the rq->hwsp we are about to dereference under the RCU
lock is valid. In this case, we make the rq->hwsp pointer safe during
i915_request_retire() and so we know that rq->hwsp may become invalid
only after the request has been signaled. Therefore is the request is
not yet signaled when we acquire rq->hwsp under the RCU, we know that
rq->hwsp will remain valid for the duration of the RCU read lock.
This is a very small window that may lead to either considering the
request not completed (causing a delay until the request is checked
again, any wait for the request is not affected) or dereferencing an
invalid pointer.
Fixes: 3adac4689f58 ("drm/i915: Introduce concept of per-timeline (context) HWSP")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: <stable@vger.kernel.org> # v5.1+
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201218122421.18344-1-chris@chris-wilson.co.uk
|
|
Add bound checks for TGL REV ID array. Since, there might
be a possibility of using older kernels on latest platform
revisions, resulting in out of bounds access for rev ID array.
In this scenario, use the latest rev ID available and apply
those WAs.
Also, modify GT macros for TGL rev ID to reuse tgl_revids_get().
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201203072359.156682-2-aditya.swarup@intel.com
|
|
Fix TGL REVID macros to fetch correct display/gt stepping based
on SOC rev id from INTEL_REVID() macro. Previously, we were just
returning the first element of the revid array instead of using
the correct index based on SOC rev id.
Fixes: c33298cb34f5 ("drm/i915/tgl: Fix stepping WA matching")
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201203072359.156682-1-aditya.swarup@intel.com
|
|
Since we wake the GT up before executing a request, and go to sleep as
soon as it is retired, the GT wake time not only represents how long the
device is powered up, but also provides a summary, albeit an overestimate,
of the device runtime (i.e. the rc0 time to compare against rc6 time).
v2: s/busy/awake/
v3: software-gt-awake-time and I915_PMU_SOFTWARE_GT_AWAKE_TIME
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215154456.13954-1-chris@chris-wilson.co.uk
|
|
Matthew Brost pointed out that the while-loop on a shared breadcrumb was
inherently fraught with danger as it competed with the other users of
the breadcrumbs. However, in order to completely drain the re-arming irq
worker, the while-loop is a necessity, despite my optimism that we could
force cancellation with a couple of irq_work invocations.
Given that we can't merely drop the while-loop, use an activity counter on
the breadcrumbs to detect when we are parking the breadcrumbs for the
last time.
Based on a patch by Matthew Brost.
Reported-by: Matthew Brost <matthew.brost@intel.com>
Suggested-by: Matthew Brost <matthew.brost@intel.com>
Fixes: 9d5612ca165a ("drm/i915/gt: Defer enabling the breadcrumb interrupt to after submission")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201217091524.10258-1-chris@chris-wilson.co.uk
|
|
Use the wait_queue_entry.flags to denote the special fence behaviour
(flattening continuations along fence chains, and for propagating
errors) rather than trying to detect ordinary waiters by their
functions.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201216165850.25030-1-chris@chris-wilson.co.uk
|
|
Reduce the pollution of intel_engine.h by moving gen8_emit_pipe_control
and friends to gen8_engine_cs.h
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201216135452.6063-1-chris@chris-wilson.co.uk
|
|
The free_list and worker was introduced in commit 5f09a9c8ab6b ("drm/i915:
Allow contexts to be unreferenced locklessly"), but subsequently made
redundant by the removal of the last sleeping lock in commit 2935ed5339c4
("drm/i915: Remove logical HW ID"). As we can now free the GEM context
immediately from any context, remove the deferral of the free_list
v2: Lift removing the context from the global list into close().
Suggested-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201215152138.8158-1-chris@chris-wilson.co.uk
|
|
When inserting a VMA, we restrict the placement to the low 4G unless the
caller opts into using the full range. This was done to allow usersapce
the opportunity to transition slowly from a 32b address space, and to
avoid breaking inherent 32b assumptions of some commands.
However, for insert we limited ourselves to 4G-4K, but on verification
we allowed the full 4G. This causes some attempts to bind a new buffer
to sporadically fail with -ENOSPC, but at other times be bound
successfully.
commit 48ea1e32c39d ("drm/i915/gen9: Set PIN_ZONE_4G end to 4GB - 1
page") suggests that there is a genuine problem with stateless addressing
that cannot utilize the last page in 4G and so we purposefully excluded
it. This means that the quick pin pass may cause us to utilize a buggy
placement.
Reported-by: CQ Tang <cq.tang@intel.com>
Testcase: igt/gem_exec_params/larger-than-life-batch
Fixes: 48ea1e32c39d ("drm/i915/gen9: Set PIN_ZONE_4G end to 4GB - 1 page")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: CQ Tang <cq.tang@intel.com>
Reviewed-by: CQ Tang <cq.tang@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Cc: <stable@vger.kernel.org> # v4.5+
Link: https://patchwork.freedesktop.org/patch/msgid/20201216092951.7124-1-chris@chris-wilson.co.uk
|
|
Chris spotted that since 16ffe73c186b ("drm/i915/pmu: Use GT parked for
estimating RC6 while asleep") we don't rely on runtime pm internals when
estimating RC6 while asleep. We can remove the ifdef code to simplify and
at the same time wake up the device less when querying RC6 if CONFIG_PM is
not compiled in.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
References: 16ffe73c186b ("drm/i915/pmu: Use GT parked for estimating RC6 while asleep")
Reported-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20201214094349.3563876-3-tvrtko.ursulin@linux.intel.com
|
|
RC6 is a hardware counter and as such estimating it using the raw clock
during runtime suspend is more appropriate.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
References: 34f439278cef ("perf: Add per event clockid support")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20201214094349.3563876-2-tvrtko.ursulin@linux.intel.com
|
|
Chris found a CI report which points out calling intel_runtime_pm_get from
inside i915_pmu_enable hook is not allowed since it can be invoked from
hard irq context. This is something we knew but forgot, so lets fix it
once again.
We do this by syncing the internal book keeping with hardware rc6 counter
on driver load.
v2:
* Always sync on parking and fully sync on init.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: f4e9894b6952 ("drm/i915/pmu: Correct the rc6 offset upon enabling")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20201214094349.3563876-1-tvrtko.ursulin@linux.intel.com
|
|
The workarounds are tied to the GT and we should derive the tests local
to the GT.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201210080240.24529-2-chris@chris-wilson.co.uk
|
|
When we reset the legacy ring context, due to potential corruption over
suspend/resume, remove the valid bit so that we avoid loading garbage.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201210080240.24529-1-chris@chris-wilson.co.uk
|
|
The above workaround was added as an engine workaround not a GT
workaround. Moved it to the correct location.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20201210170615.3107266-1-lucas.demarchi@intel.com
|
|
These functions are independent from the backend used and can therefore
be split out of the exelists submission file, so they can be re-used by
the upcoming GuC submission backend.
Based on a patch by Chris Wilson.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201209233618.4287-3-chris@chris-wilson.co.uk
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
We want to separate the utility functions for controlling the logical
ring context from the execlists submission mechanism (which is an
overgrown scheduler).
This is similar to Daniele's work to split up the files, but being
selfish I wanted to base it after my own changes to intel_lrc.c petered
out.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201209233618.4287-2-chris@chris-wilson.co.uk
|
|
Cleanup intel_lrc.h by moving some of the residual common register
definitions into intel_lrc_reg.h, prior to rebranding and splitting off
the submission backends.
v2: keep the SCHEDULE enum in the old file, since it is specific to the
gvt usage of the execlists submission backend (John)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> #v2
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201209233618.4287-1-chris@chris-wilson.co.uk
|
|
Now that the only user of the uninterruptible wait was eliminated,
remove the support.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201209164008.5487-3-chris@chris-wilson.co.uk
|
|
Tigerlake is plagued by spontaneous DMAR faults [reason 7, next page
table ptr is invalid] which lead to GPU hangs. These faults occur when
an iommu map is immediately reused. Adding further clflushes and
barriers around either the GTT PTE or iommu PTE updates do not prevent
the faults. So far the only effect has been from inducing a delay
between reuse of the iommu on the GPU, and applying the delay at the
iommu map allows for the smallest stable delay.
Note that such a delay is hideous and clearly does not fix the root cause,
and so should only be a bandaid until a complete solution is found. The
delay was determined by running igt/gem_exec_fence/parallel in a loop for
a few hours (unpatched MTBF is about 10s).
We have also seen such DMAR fault [reason 7] errors on other platforms,
notably gen9-gen11, but so far it has only been trivially and
consistently reproduced on Tigerlake.
v2: Leave a tell-tale to know when we apply the vt'd quirk, and as a
reminder to remove it again. Hopefully.
Testcase: igt/gem_exec_fence/parallel
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201209164008.5487-2-chris@chris-wilson.co.uk
|
|
A call to wait for the GT to idle from inside the put_pages fallback is
prone to cause an uninterruptible livelock. As it does not provide
adequate serialisation with new requests, simply fallback to a trivial
sleep.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201209164008.5487-1-chris@chris-wilson.co.uk
|
|
Document what a masked register is according to bspec so we avoid
developers using the wrong functions to implement WAs.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20201209045246.2905675-3-lucas.demarchi@intel.com
|
|
The use of "masked" in this function is due to its history. Once upon a
time it received a mask and a value as parameter. Since
commit eeec73f8a4a4 ("drm/i915/gt: Skip rmw for masked registers")
that is not true anymore and now there is a clear and a set parameter.
Depending on the case, that can still be thought as a mask and value,
but there are some subtle differences: what we clear doesn't need to be
the same bits we are setting, particularly when we are using masked
registers.
The fact that we also have "masked registers", i.e. registers whose mask
is stored in the upper 16 bits of the register, makes it even more
confusing, because "masked" in wa_write_masked_or() has little to do
with masked registers, but rather refers to the old mask parameter the
function received (that can also, but not exclusively, be used to write
to masked register).
Avoid the ambiguity and misnomer by renaming it to something else,
hopefully less confusing: wa_write_clr_set(), to designate that we are
doing both clr and set operations in the register.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20201209045246.2905675-2-lucas.demarchi@intel.com
|
|
When using masked registers, there is nothing to clear since a masked
register has the mask in the upper 16b: we can just write to the
location we want and use the mask to control what bits we are writing
to.
However that doesn't mean we don't want to read back the register and
check the value actually matched what we wanted to write, i.e. that
the WA stick. That should be an explicit opt-out for registers that are
either write-only or that are affected by hardware misbehavior.
Moreover both wa_masked_en() and wa_masked_dis() check the WA stick, so
skipping the check just because the field is more than 1 bit is
surprising and error-prone.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20201209045246.2905675-1-lucas.demarchi@intel.com
|
|
Closed vma are protected by the GT wakeref held as we lookup the vma, so
we know that the vma will not be freed as we process it for the execbuf.
Instead we expect to catch the closed status of the context, and simply
allow the close-race on an individual vma to be washed away.
Longer term, the GT wakeref protection will be removed by explicit
vma.kref tracking.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2245
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201207193824.18114-1-chris@chris-wilson.co.uk
|
|
When we fail to find a single block large enough to require splitting,
report the largest block we did find.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201207130346.11849-1-chris@chris-wilson.co.uk
|
|
Currently the check that the unsigned size_t variable i is >= 0
is always true because the unsigned variable will never be negative,
causing the loop to run forever. Fix this by changing the
pre-decrement check to a zero check on i followed by a decrement of i.
Addresses-Coverity: ("Unsigned compared against 0")
Fixes: bfed6708d6c9 ("drm/i915: use vmap in shmem_pin_map")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20201002170354.94627-1-colin.king@canonical.com
|
|
Remove the last macro and implement it as a function like the rest of
the operations that don't assume there is a `wal` list, but rather
receive it as argument.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20201205092542.2325477-4-lucas.demarchi@intel.com
|
|
Just ommitting the list it's operating on doesn't save much typing
and adds another way to do the same thing. Just replace it with
wa_masked_dis().
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20201205092542.2325477-3-lucas.demarchi@intel.com
|
|
Just ommitting the list it's operating on doesn't save much typing and
adds another way to do the same thing. Just replace it with
wa_masked_en().
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20201205092542.2325477-2-lucas.demarchi@intel.com
|
|
Set GS Timer to 224 to prevent a HS/DS hang.
Bspec: 53508
v2: reword commit message and add comment explaining why read
verification is ignored (Chris)
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Swathi Dhanavanthri <swathi.dhanavanthri@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20201205092542.2325477-1-lucas.demarchi@intel.com
|
|
Across a reset, we stop the engine but not the timers. This leaves a
window where the timers have inconsistent state with the engine, but
should only result in a spurious timeout. As we cancel the outstanding
events, also cancel their timers.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201204151234.19729-4-chris@chris-wilson.co.uk
|
|
The GT and engine reset failures are completely invisible when looking at
a trace for a bug, but are vital to understanding the incomplete flow.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201204151234.19729-3-chris@chris-wilson.co.uk
|
|
We currently presume that the engine reset is successful, cancelling the
expired preemption timer in the process. However, engine resets can
fail, leaving the timeout still pending and we will then respond to the
timeout again next time the tasklet fires. What we want is for the
failed engine reset to be promoted to a full device reset, which is
kicked by the heartbeat once the engine stops processing events.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1168
Fixes: 3a7a92aba8fb ("drm/i915/execlists: Force preemption")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: <stable@vger.kernel.org> # v5.5+
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201204151234.19729-2-chris@chris-wilson.co.uk
|
|
Before reseting the engine, we suspend the execution of the guilty
request, so that we can continue execution with a new context while we
slowly compress the captured error state for the guilty context. However,
if the reset fails, we will promptly attempt to reset the same request
again, and discover the ongoing capture. Ignore the second attempt to
suspend and capture the same request.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1168
Fixes: 32ff621fd744 ("drm/i915/gt: Allow temporary suspension of inflight requests")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: <stable@vger.kernel.org> # v5.7+
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201204151234.19729-1-chris@chris-wilson.co.uk
|
