summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2022-07-25drm/amd/display: Copy crc_skip_count when duplicating CRTC stateLeo Li
[Why] crc_skip_count is used to track how many frames to skip to allow the OTG CRC engine to "warm up" before it outputs correct CRC values. Experimentally, this seems to be 2 frames. When duplicating CRTC states, this value was not copied to the duplicated state. Therefore, when this state is committed, we will needlessly wait 2 frames before outputing CRC values. Even if the CRC engine is already warmed up. [How] Copy the crc_skip_count as part of dm_crtc_duplicate_state. Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Leo Li <sunpeng.li@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-25drm/amd/display: Add debug option for idle optimizations on cursor updatesAlvin Lee
For optimizations and debug purposes we added an option to exit idle operations on cursor updates. Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-25drm/amd/display: Disable MPC split for DCN32/321Alvin Lee
Due to CRB, no need to rely on MPC splitting to maximize use of DET anymore. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-25drm/amd/display: Add missing ODM 2:1 policy logicSamson Tam
Phantom pipes must use the same configuration used in main pipes. This commit add this check. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Samson Tam <Samson.Tam@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-25drm/amd/display: Update DCN32 and DCN321 SR latenciesAlvin Lee
Update worst case SR latencies according to values measured by hardware team. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-25drm/amd/display: Add reinstate dram in the FPO logicRodrigo Siqueira
In order to handle FPO correctly, we need to reinstate the dram values. This function adds the required code to handle the vblank stretch and the dram calculation. Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-25drm/amd/display: Add dc_ctx to link_enc_create() parametersAurabindo Pillai
[Why&How] Preparation to enable run time initialization of register offsets to add dc_context to the link_enc_create callback. This is needed to get the dc_ctx handle where register offset initialization routine is called. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by: Alan Liu <HaoPing.Liu@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-25drm/amd/display: Cache cursor when cursor exceeds 64x64Chris Park
[Why] When Static screen from MALL, the cursor needs to be cached if cursor exceeds 64x64 size. [How] Program the bit that cache cursor in MALL when size of the cursor exceeds 64x64. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Alan Liu <HaoPing.Liu@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Chris Park <chris.park@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-25drm/amd/display: Add support for manual DMUB FAMS triggerAnthony Koo
- Add is_drr parameter to indicate DRR is enabled on the panel to determine whether SubVP MCLK switch logic should be enabled - Add DRR manual trigger in FW (instead of driver) because manual trigger programming triggers DRR update pending and can block SubVP MCLK switches from taking place Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-25drm/amd/display: Fix dpstreamclk programmingMichael Strauss
[WHY] Currently programming incorrect hpo inst as well as selecting incorrect source [HOW] Use hpo inst instead of otg inst to select dpstreamclk inst Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-25drm/amd/display: Add missing AUDIO_DTO_SEL reg fieldMichael Strauss
[WHY] Needed to program audio dto Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-25drm/amd/display: Add OTG/ODM functionsMichael Strauss
[WHY] Required for correct OTG_H_TIMING_CNTL programming Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-25drm/amd/display: Use correct clock source constructor for DCN314Michael Strauss
[WHY] Previously was pointing to DCN3 clock constructor rather than DCN31's Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-25drm/amd/display: Use correct DTO_SRC_SEL for 128b/132b encodingMichael Strauss
[WHY] DP DTO isn't used for 128b/132b encoding [HOW] Check current link rate to determine whether using 8b/10b or 128/132b encoding Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-25drm/amd/display: Add pixel rate div calcs and programmingMichael Strauss
[WHY/HOW] Need to calculate and set some pixel rate divisors on correct otg_inst Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-25drm/amd/display: Remove FPU flags from DCN30 MakefileRodrigo Siqueira
At this stage, we must have all the FPU code for DCN30 isolated in the DML folder. Drop FPU flags from Makefile. Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-25drm/amd/display: Create patch bounding box function for isolate FPURodrigo Siqueira
In the DCN30 resource, we have a small patch to the bounding box struct; this patch uses FPU operations. This commit moves that specific part to its function under the DML folder. Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-25drm/amd/display: Move mclk calculation function to DMLRodrigo Siqueira
The function responsible for calculating the MCLK switching has FPU operations. This commit moves it to the dcn30_fpu file. Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-25drm/amd/display: Remove FPU operations from dcn201 resourcesRodrigo Siqueira
We have some FPU operations on the resource part of the DCN201. This commit drops FPU flags and moves any required FPU code to the DML folder. Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-25drm/amd/display: Fallback to SW cursor if SubVP + cursor too bigAlvin Lee
[Description] - For SubVP cursor cannot be cached in MALL, therefore we will switch to SW cursor if the cursor size exceeds what can fit in the local DCN buffers (64x64x4) - Returning false / failure for set_cursor_attributes will fallback to SW cursor Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-25drm/amd/display: Drop unnecessary FPU flags on dcn302 filesRodrigo Siqueira
We already isolated the DCN302 code in the DML folder, but we forgot to drop the FPU flags from the Makefile. This commit drops those flags. Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-25drm/amd/display: Reboot while unplug hdcp enabled dp from mst hubhersen wu
[Why] event_property_update does not check NULL pointer [How] check aconnector->base.state equals NULL Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: hersen wu <hersenxs.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-25drm/amd/display: Reset pipe count when iterating for DET overrideTaimur Hassan
[Why] Coding error in DET allocation was resulting in too few DET segments being allocated, causing underflow. [How] Reset pipe count each time we begin iterating through pipes for a stream. Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-25drm/amd/display: Calculate MALL cache lines based on Mblks requiredAlvin Lee
[Description] - Calculation for NumWays in MALL should be based on number of MBlks Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-25drm/amd/display: Fix two MPO videos in single display ODM combine modeSamson Tam
[Why] In single display ODM combine mode, two MPO videos ( three planes ) are not working [How] When we detect three planes, don't set odm combine 2to1 policy for the MPO planes. Otherwise, we run out of pipes available Add support for two MPO videos in dc_add_plane_to_context(). Don't allow both videos to be on the same side of the display. Add extra check when fetching free pipe for two MPO videos. Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Samson Tam <Samson.Tam@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-25drm/amd/display: Guard against zero memory channelsNicholas Kazlauskas
[Why] If BIOS doesn't specify number of memory channels then bandwidth validation will fail due to insufficient BW in DML. [How] If BIOS is setting zero channels then use the default in the table. If no entry is in the table and no BIOS value is specified then throw an ASSERT for future developers to look into. Reviewed-by: Michael Strauss <Michael.Strauss@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-25drm/amd/display: Updates SubVP and SubVP DRR casesAlvin Lee
[Description] - For any DRR cases in SubVP, don't lock for VSYNC flips - For DCN32/321 use FW to do DRR manual trigger programming - Add bit in SubVP cmd to indicate if the SubVP pipe is DRR Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-25drm/amd/display: Fix OPTC function pointers for DCN314Nicholas Kazlauskas
[Why] Access violation occurs when swapping between HDMI and FRL monitors because we're missing the immediate_disable_crtc callback and it's required for the DCN314 clk manager. [How] Update the table to match the DCN31 optc functions for ones that should be the same: - immediate_disable_crtc - configure_crc Reviewed-by: Michael Strauss <Michael.Strauss@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-25drm/amd/display: Add enable/disable FIFO callbacks to stream setupNicholas Kazlauskas
[Why] We don't write out attributes after disabling and re-enabling the link on some monitors, causing some, but not all, HDMI displays to fail to lightup on DCN314. [How] Firmware used to do this after DIG link setup. Since firmware is no longer doing this to support USB4 and dynamic link remapping we'll need to add this to driver in the equivalent paths. New optional callbacks were created in the stream encoder interface and implementations were added for DCN314. Reviewed-by: Michael Strauss <Michael.Strauss@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-25drm/amd/display: Avoid MPC infinite loopAric Cyr
[why] In some cases MPC tree bottom pipe ends up point to itself. This causes iterating from top to bottom to hang the system in an infinite loop. [how] When looping to next MPC bottom pipe, check that the pointer is not same as current to avoid infinite loop. Reviewed-by: Josip Pavic <Josip.Pavic@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-25drm/amdgpu: enable swiotlb for gmc 11.0Aaron Liu
Enable swiotlb for gmc 11.0. Signed-off-by: Aaron Liu <aaron.liu@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-25drm/amdgpu: enable swiotlb for gmc 10.0 (V2)Aaron Liu
Enable swiotlb for gmc 10.0. v2: include drm_cache.h to use the function ‘drm_need_swiotlb’ Signed-off-by: Aaron Liu <aaron.liu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-25drm/i915/reset: Add additional steps for Wa_22011802037 for execlist backendUmesh Nerlige Ramappa
For execlists backend, current implementation of Wa_22011802037 is to stop the CS before doing a reset of the engine. This WA was further extended to wait for any pending MI FORCE WAKEUPs before issuing a reset. Add the extended steps in the execlist path of reset. In addition, extend the WA to gen11. v2: (Tvrtko) - Clarify comments, commit message, fix typos - Use IS_GRAPHICS_VER for gen 11/12 checks v3: (Daneile) - Drop changes to intel_ring_submission since WA does not apply to it - Log an error if MSG IDLE is not defined for an engine Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Fixes: f6aa0d713c88 ("drm/i915: Add Wa_22011802037 force cs halt") Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: John Harrison <John.C.Harrison@Intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220621192105.2100585-1-umesh.nerlige.ramappa@intel.com (cherry picked from commit 0667429ce68e0b08f9f1fec8fd0b1f57228f605e) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2022-07-25drm/amd: Fix typo 'the the' in commentSlark Xiao
Replace 'the the' with 'the' in the comment. Signed-off-by: Slark Xiao <slark_xiao@163.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-25drm/amd/display: reduce stack for dml32_CalculatePrefetchScheduleAlex Deucher
Move stack variables to dummy structure. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au>
2022-07-25drm/amd/display: reduce stack for ↵Alex Deucher
dml32_CalculateWatermarksMALLUseAndDRAMSpeedChangeSupport Move stack variables to dummy structure. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au>
2022-07-25drm/amd/display: reduce stack for dml32_CalculateVMRowAndSwathAlex Deucher
Move stack variables to dummy structure. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au>
2022-07-25drm/amd/display: reduce stack for dml32_CalculateSwathAndDETConfigurationAlex Deucher
Move stack variables to dummy structure. Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au>
2022-07-25drm/amd/display: reduce stack size in dcn32 dml (v2)Alex Deucher
Move additional dummy structures off the stack and into the dummy vars structure. Fixes the following: drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_mode_vba_32.c: In function 'DISPCLKDPPCLKDCFCLKDeepSleepPrefetchParametersWatermarksAndPerformanceCalculation': drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_mode_vba_32.c:1659:1: error: the frame size of 2144 bytes is larger than 2048 bytes [-Werror=frame-larger-than=] 1659 | } | ^ drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_mode_vba_32.c: In function 'dml32_ModeSupportAndSystemConfigurationFull': drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_mode_vba_32.c:3799:1: error: the frame size of 2464 bytes is larger than 2048 bytes [-Werror=frame-larger-than=] 3799 | } // ModeSupportAndSystemConfigurationFull | ^ v2: move more stuff to dummy structure, fix init order (Alex) Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au>
2022-07-25drm/amdkfd: Process notifier release callback don't take mutexPhilip Yang
Move process queues cleanup to deferred work kfd_process_wq_release, to avoid potential deadlock circular locking warning: WARNING: possible circular locking dependency detected the existing dependency chain (in reverse order) is: -> #2 ((work_completion)(&svms->deferred_list_work)){+.+.}-{0:0}: __flush_work+0x343/0x4a0 svm_range_list_lock_and_flush_work+0x39/0xc0 svm_range_set_attr+0xe8/0x1080 [amdgpu] kfd_ioctl+0x19b/0x600 [amdgpu] __x64_sys_ioctl+0x81/0xb0 do_syscall_64+0x34/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #1 (&info->lock#2){+.+.}-{3:3}: __mutex_lock+0xa4/0x940 amdgpu_amdkfd_gpuvm_acquire_process_vm+0x2e3/0x590 kfd_process_device_init_vm+0x61/0x200 [amdgpu] kfd_ioctl_acquire_vm+0x83/0xb0 [amdgpu] kfd_ioctl+0x19b/0x600 [amdgpu] __x64_sys_ioctl+0x81/0xb0 do_syscall_64+0x34/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #0 (&process->mutex){+.+.}-{3:3}: __lock_acquire+0x1365/0x23d0 lock_acquire+0xc9/0x2e0 __mutex_lock+0xa4/0x940 kfd_process_notifier_release+0x96/0xe0 [amdgpu] __mmu_notifier_release+0x94/0x210 exit_mmap+0x35/0x1f0 mmput+0x63/0x120 svm_range_deferred_list_work+0x177/0x2c0 [amdgpu] process_one_work+0x2a4/0x600 worker_thread+0x39/0x3e0 kthread+0x16d/0x1a0 Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock((work_completion)(&svms->deferred_list_work)); lock(&info->lock#2); lock((work_completion)(&svms->deferred_list_work)); lock(&process->mutex); Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-25drm/amdkfd: Correct mmu_notifier_get failure handlingPhilip Yang
If process has signal pending, mmu_notifier_get_locked fails and calls ops->free_notifier, kfd_process_free_notifier will schedule kfd_process_wq_release as process refcount is 1, but process structure is already freed. This use after free bug causes system crash with different backtrace. The fix is to increase process refcount and then decrease the refcount after mmu_notifier_get success. Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-25drm/amd/display: Specify supported modifiers for dcn314Roman Li
Use same modifiers as for AMDGPU_FAMILY_GC_11_0_0 Signed-off-by: Roman Li <roman.li@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-25drm/amd/display: Fix dc_version detect for dcn314Roman Li
[Why] While parsing dc_version redundant check leads to invalid dc_version for dcn314. [How] Remove redundant check Fixes: ee7b62e127c8 ("drm/amd/display: Enable DCN314 in DC") Signed-off-by: Roman Li <roman.li@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-25drm/amd/display: move FPU code from dcn301 clk mgr to DML folderMelissa Wen
The -mno-gnu-attribute option in dcn301 clk mgr makefile hides a soft vs hard fp error for powerpc. After removing this flag, we can see some FPU code remains there: gcc-11.3.0-nolibc/powerpc64-linux/bin/powerpc64-linux-ld: drivers/gpu/drm/amd/amdgpu/../display/dc/dml/display_mode_lib.o uses hard float, drivers/gpu/drm/amd/amdgpu/../display/dc/clk_mgr/dcn301/vg_clk_mgr.o uses soft float Therefore, remove the -mno-gnu-attribute flag for dcn301/powerpc and move FPU-associated code to DML folder. Signed-off-by: Melissa Wen <mwen@igalia.com> Reviewed-by: Maíra Canal <mairacanal@riseup.net> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-25drm/amd/display: move FPU code from dcn30 clk mgr to DML folderMelissa Wen
The -mno-gnu-attribute option in clk mgr makefile for dcn30 hides a soft vs hard fp error for powerpc. After removing this flag, we can see some FPU code remains there: gcc-11.3.0-nolibc/powerpc64-linux/bin/powerpc64-linux-ld: drivers/gpu/drm/amd/amdgpu/../display/dc/dml/display_mode_lib.o uses hard float, drivers/gpu/drm/amd/amdgpu/../display/dc/clk_mgr/dcn30/dcn30_clk_mgr.o uses soft float Therefore, remove the -mno-gnu-attribute flag for dcn30/powerpc and move FPU-associated code to DML folder. Signed-off-by: Melissa Wen <mwen@igalia.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-25drm/amd/display: move FPU code on dcn21 clk_mgrMelissa Wen
The -mno-gnu-attribute option in dcn21 clk mgr makefile hides a soft vs hard fp error for powerpc. After removing this flag, we can see some FPU code remains there: /gcc-11.3.0-nolibc/powerpc64-linux/bin/powerpc64-linux-ld: drivers/gpu/drm/amd/amdgpu/../display/dc/dml/display_mode_lib.o uses hard float, drivers/gpu/drm/amd/amdgpu/../display/dc/clk_mgr/dcn21/rn_clk_mgr.o uses soft float Therefore, remove the -mno-gnu-attribute flag for dcn21/powerpc and move FPU-associated code to DML folder. Signed-off-by: Melissa Wen <mwen@igalia.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-25drm/amd/display: remove useless FPU protection wrapper from dcn31_resource fileMelissa Wen
Many lines of code in dcn31_resource_construct are wrapped by DC_FP macro to protect FPU operations; however, there is no FPU in this region. Therefore, just remove the wrapper for clarity. Signed-off-by: Melissa Wen <mwen@igalia.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-25drm/amd/display: fix soft-fp vs hard-fp on DCN 3.1 family for powerpcMelissa Wen
Move remaining FPU code to DML folder that caused compilation error for powerpc. This patch depends on [1] to prevent the error below: /gcc-11.3.0-nolibc/powerpc64-linux/bin/powerpc64-linux-ld: drivers/gpu/drm/amd/amdgpu/../display/dc/dml/display_mode_lib.o uses hard float, drivers/gpu/drm/amd/amdgpu/../display/dc/dcn31/dcn31_resource.o uses soft float /gcc-11.3.0-nolibc/powerpc64-linux/bin/powerpc64-linux-ld: failed to merge target specific data of file drivers/gpu/drm/amd/amdgpu/../display/dc/dcn31/dcn31_resource.o /gcc-11.3.0-nolibc/powerpc64-linux/bin/powerpc64-linux-ld: drivers/gpu/drm/amd/amdgpu/../display/dc/dml/display_mode_lib.o uses hard float, drivers/gpu/drm/amd/amdgpu/../display/dc/dcn315/dcn315_resource.o uses soft float /gcc-11.3.0-nolibc/powerpc64-linux/bin/powerpc64-linux-ld: failed to merge target specific data of file drivers/gpu/drm/amd/amdgpu/../display/dc/dcn315/dcn315_resource.o /gcc-11.3.0-nolibc/powerpc64-linux/bin/powerpc64-linux-ld: drivers/gpu/drm/amd/amdgpu/../display/dc/dml/display_mode_lib.o uses hard float, drivers/gpu/drm/amd/amdgpu/../display/dc/dcn316/dcn316_resource.o uses soft float /gcc-11.3.0-nolibc/powerpc64-linux/bin/powerpc64-linux-ld: failed to merge target specific data of file drivers/gpu/drm/amd/amdgpu/../display/dc/dcn316/dcn316_resource.o [1] https://lore.kernel.org/amd-gfx/20220716195144.342960-1-mwen@igalia.com/ Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Melissa Wen <mwen@igalia.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-25drm/amd/display: 3.2.195Aric Cyr
This version brings along following fixes: - Isolate FPU operation for DCN32/321 under the DML folder - Create a specific file for CRTC and plane based on amdgpu_dm - Fix DSC issues - Update DML logic Acked-by: Alan Liu <HaoPing.Liu@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-07-25drm/amd/display: Drop FPU code from dcn321 resourceRodrigo Siqueira
This commit fully move the missing FPU operations from dcn321 resource to dcn321 fpu. It also remove those FPU flags from the Makefile. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-04-22 16:31:02 +0000