| Age | Commit message (Collapse) | Author |
|---|
|
I would like to stop exporting OF-specific devm_gpiod_get_from_of_node()
so that gpiolib can be cleaned a bit, so let's switch to the generic
fwnode property API.
While at it, switch the rest of the calls to read properties in
bd9576_wdt_probe() to the generic device property API as well.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220903-gpiod_get_from_of_node-remove-v1-10-b29adfb27a6c@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more hotfixes from Andrew Morton:
"Seventeen hotfixes. Mostly memory management things.
Ten patches are cc:stable, addressing pre-6.0 issues"
* tag 'mm-hotfixes-stable-2022-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
.mailmap: update Luca Ceresoli's e-mail address
mm/mprotect: only reference swap pfn page if type match
squashfs: don't call kmalloc in decompressors
mm/damon/dbgfs: avoid duplicate context directory creation
mailmap: update email address for Colin King
asm-generic: sections: refactor memory_intersects
bootmem: remove the vmemmap pages from kmemleak in put_page_bootmem
ocfs2: fix freeing uninitialized resource on ocfs2_dlm_shutdown
Revert "memcg: cleanup racy sum avoidance code"
mm/zsmalloc: do not attempt to free IS_ERR handle
binder_alloc: add missing mmap_lock calls when using the VMA
mm: re-allow pinning of zero pfns (again)
vmcoreinfo: add kallsyms_num_syms symbol
mailmap: update Guilherme G. Piccoli's email addresses
writeback: avoid use-after-free after removing device
shmem: update folio if shmem_replace_page() updates the page
mm/hugetlb: avoid corrupting page->mapping in hugetlb_mcopy_atomic_pte
|
|
Take the mmap_read_lock() when using the VMA in binder_alloc_print_pages()
and when checking for a VMA in binder_alloc_new_buf_locked().
It is worth noting binder_alloc_new_buf_locked() drops the VMA read lock
after it verifies a VMA exists, but may be taken again deeper in the call
stack, if necessary.
Link: https://lkml.kernel.org/r/20220810160209.1630707-1-Liam.Howlett@oracle.com
Fixes: a43cfc87caaf (android: binder: stop saving a pointer to the VMA)
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reported-by: Ondrej Mosnacek <omosnace@redhat.com>
Reported-by: <syzbot+a7b60a176ec13cafb793@syzkaller.appspotmail.com>
Acked-by: Carlos Llamas <cmllamas@google.com>
Tested-by: Ondrej Mosnacek <omosnace@redhat.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Christian Brauner (Microsoft) <brauner@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hridya Valsaraju <hridya@google.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Martijn Coenen <maco@android.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Todd Kjos <tkjos@android.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: "Arve Hjønnevåg" <arve@android.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fixes from Rafael Wysocki:
"Fix two issues introduced recently and one driver problem leading to a
NULL pointer dereference in some cases.
Specifics:
- Add missing EXPORT_SYMBOL_GPL in the thermal core and add back the
required 'trips' property to the thermal zone DT bindings (Daniel
Lezcano)
- Prevent the int340x_thermal driver from crashing when a package
with a buffer of 0 length is returned by an ACPI control method
evaluated by it (Lee, Chun-Yi)"
* tag 'thermal-6.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal/int340x_thermal: handle data_vault when the value is ZERO_SIZE_PTR
dt-bindings: thermal: Fix missing required property
thermal/core: Add missing EXPORT_SYMBOL_GPL
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Make __resolve_freq() check the presence of the frequency table
instead of checking whether or not the ->target_index() callback is
implemented by the driver, because that need not be the case when
__resolve_freq() is used (Lukasz Luba)"
* tag 'pm-6.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: check only freq_table in __resolve_freq()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix issues introduced by recent changes related to the handling
of ACPI device properties and a coding mistake in the exit path of the
ACPI processor driver.
Specifics:
- Prevent acpi_thermal_cpufreq_exit() from attempting to remove
the same frequency QoS request multiple times (Riwen Lu)
- Fix type detection for integer ACPI device properties (Stefan
Binding)
- Avoid emitting false-positive warnings when processing ACPI
device properties and drop the useless default case from the
acpi_copy_property_array_uint() macro (Sakari Ailus)"
* tag 'acpi-6.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: property: Remove default association from integer maximum values
ACPI: property: Ignore already existing data node tags
ACPI: property: Fix type detection of unified integer reading functions
ACPI: processor: Remove freq Qos request for all CPUs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- two minor cleanups
- a fix of the xen/privcmd driver avoiding a possible NULL dereference
in an error case
* tag 'for-linus-6.0-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/privcmd: fix error exit of privcmd_ioctl_dm_op()
xen: move from strlcpy with unused retval to strscpy
xen: x86: remove setting the obsolete config XEN_MAX_DOMAIN_MEMORY
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev fixes and updates from Helge Deller:
"Mostly just small patches, with the exception of the bigger indenting
cleanups in the sisfb and radeonfb drivers.
Two patches should be mentioned though: A fix-up for fbdev if the
screen resize fails (by Shigeru Yoshida), and a potential divide by
zero fix in fb_pm2fb (by Letu Ren).
Summary:
Major fixes:
- Revert the changes for fbcon console when vc_resize() fails
[Shigeru Yoshida]
- Avoid a potential divide by zero error in fb_pm2fb [Letu Ren]
Minor fixes:
- Add missing pci_disable_device() in chipsfb_pci_init() [Yang
Yingliang]
- Fix tests for platform_get_irq() failure in omapfb [Yu Zhe]
- Destroy mutex on freeing struct fb_info in fbsysfs [Shigeru
Yoshida]
Cleanups:
- Move fbdev drivers from strlcpy to strscpy [Wolfram Sang]
- Indenting fixes, comment fixes, ... [Jiapeng Chong & Jilin Yuan]"
* tag 'fbdev-for-6.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: fbcon: Properly revert changes when vc_resize() failed
fbdev: Move fbdev drivers from strlcpy to strscpy
fbdev: omap: Remove unnecessary print function dev_err()
fbdev: chipsfb: Add missing pci_disable_device() in chipsfb_pci_init()
fbdev: fbcon: Destroy mutex on freeing struct fb_info
fbdev: radeon: Clean up some inconsistent indenting
fbdev: sisfb: Clean up some inconsistent indenting
fbdev: fb_pm2fb: Avoid potential divide by zero error
fbdev: ssd1307fb: Fix repeated words in comments
fbdev: omapfb: Fix tests for platform_get_irq() failure
|
|
Merge thermal control core fixes for 6.0-rc3:
- Fix missing required property for thermal zone description (Daniel
Lezcano).
- Add missing export symbol for
thermal_zone_device_register_with_trips() (Daniel Lezcano).
* thermal-core:
dt-bindings: thermal: Fix missing required property
thermal/core: Add missing EXPORT_SYMBOL_GPL
|
|
* acpi-processor:
ACPI: processor: Remove freq Qos request for all CPUs
|
|
Pull drm fixes from Dave Airlie:
"Weekly fixes, lots of amdgpu fixes mostly for IP blocks introduced in
6.0-rc1, otherwise vc4, nouveau fixes.
gem:
- Fix handle release leak
nouveau:
- Fix fencing when moving BO
vc4:
- HDMI fixes
amdgpu:
- GFX 11.0 fixes
- PSP XGMI handling fixes
- GFX9 fix for compute-only IPs
- Drop duplicated function call
- Fix warning due to missing header
- NBIO 7.7 fixes
- DCN 3.1.4 fixes
- SDMA 6.0 fixes
- SMU 13.0 fixes
- Arcturus GPUVM page table fix
- MMHUB 1.0 fix
amdkfd:
- GC 10.3.7 fix
radeon:
- Delayed work flush fix"
* tag 'drm-fixes-2022-08-26-1' of git://anongit.freedesktop.org/drm/drm: (21 commits)
drm/amdgpu: mmVM_L2_CNTL3 register not initialized correctly
drm/amdgpu: add MGCG perfmon setting for gfx11
drm/amdkfd: Fix isa version for the GC 10.3.7
drm/amdgpu: Fix page table setup on Arcturus
drm/amd/pm: update SMU 13.0.0 driver_if header
drm/amdgpu: add sdma instance check for gfx11 CGCG
drm/amd/display: enable PCON support for dcn314
drm/amdgpu: enable NBIO IP v7.7.0 Clock Gating
drm/amdgpu: add NBIO IP v7.7.0 Clock Gating support
drm/amdgpu: add TX_POWER_CTRL_1 macro definitions for NBIO IP v7.7.0
nouveau: explicitly wait on the fence in nouveau_bo_move_m2mf
drm/radeon: add a force flush to delay work when radeon
drm/amd/display: Include missing header
drm/amdgpu: Remove the additional kfd pre reset call for sriov
drm/amdgpu: Check num_gfx_rings for gfx v9_0 rb setup.
drm/amdgpu: fix hive reference leak when adding xgmi device
drm/amdgpu: Move psp_xgmi_terminate call from amdgpu_xgmi_remove_device to psp_hw_fini
drm/amdgpu: enable GFXOFF allow control for GC IP v11.0.1
drm/gem: Fix GEM handle release errors
drm/vc4: hdmi: Rework power up
...
|
|
Pull block fixes from Jens Axboe:
- MD pull request via Song:
- Fix for clustered raid (Guoqing Jiang)
- req_op fix (Bart Van Assche)
- Fix race condition in raid recreate (David Sloan)
- loop configuration overflow fix (Siddh)
- Fix missing commit_rqs call for certain conditions (Yu)
* tag 'block-6.0-2022-08-26' of git://git.kernel.dk/linux-block:
md: call __md_stop_writes in md_stop
Revert "md-raid: destroy the bitmap after destroying the thread"
md: Flush workqueue md_rdev_misc_wq in md_alloc()
md/raid10: Fix the data type of an r10_sync_page_io() argument
loop: Check for overflow while configuring loop
blk-mq: fix io hung due to missing commit_rqs
|
|
fbcon_do_set_font() calls vc_resize() when font size is changed.
However, if if vc_resize() failed, current implementation doesn't
revert changes for font size, and this causes inconsistent state.
syzbot reported unable to handle page fault due to this issue [1].
syzbot's repro uses fault injection which cause failure for memory
allocation, so vc_resize() failed.
This patch fixes this issue by properly revert changes for font
related date when vc_resize() failed.
Link: https://syzkaller.appspot.com/bug?id=3443d3a1fa6d964dd7310a0cb1696d165a3e07c4 [1]
Reported-by: syzbot+a168dbeaaa7778273c1b@syzkaller.appspotmail.com
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Signed-off-by: Helge Deller <deller@gmx.de>
CC: stable@vger.kernel.org # 5.15+
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Ten fixes.
Of the three core changes, the two large ones are a complete reversion
of the async rework and an ALUA timing rework (the latter shouldn't
affect non-ALUA paths).
The remaining patches are all small and all but one in drivers"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: sd: Revert "Rework asynchronous resume support"
scsi: core: Fix passthrough retry counter handling
scsi: ufs: core: Reduce the power mode change timeout
scsi: storvsc: Remove WQ_MEM_RECLAIM from storvsc_error_wq
scsi: ufs: host: ufs-exynos: Make fsd_ufs_drvs static
scsi: megaraid_sas: Remove unnecessary kfree()
scsi: megaraid_sas: Fix double kfree()
scsi: ufs: core: Enable link lost interrupt
scsi: core: Allow the ALUA transitioning state enough time
scsi: qla2xxx: Disable ATIO interrupt coalesce for quad port ISP27XX
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.0-2022-08-25:
amdgpu:
- GFX 11.0 fixes
- PSP XGMI handling fixes
- GFX9 fix for compute-only IPs
- Drop duplicated function call
- Fix warning due to missing header
- NBIO 7.7 fixes
- DCN 3.1.4 fixes
- SDMA 6.0 fixes
- SMU 13.0 fixes
- Arcturus GPUVM page table fix
- MMHUB 1.0 fix
amdkfd:
- GC 10.3.7 fix
radeon:
- Delayed work flush fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220825181243.5853-1-alexander.deucher@amd.com
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Short summary of fixes pull:
* gem: Fixes handle release leak
* nouveau: Fix fencing when moving BO
* vc4: HDMI fixes
* Backmerging for v6.0-rc1
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/YwclSWheC+Ai+u+v@linux-uq9g
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from ipsec and netfilter (with one broken Fixes tag).
Current release - new code bugs:
- dsa: don't dereference NULL extack in dsa_slave_changeupper()
- dpaa: fix <1G ethernet on LS1046ARDB
- neigh: don't call kfree_skb() under spin_lock_irqsave()
Previous releases - regressions:
- r8152: fix the RX FIFO settings when suspending
- dsa: microchip: keep compatibility with device tree blobs with no
phy-mode
- Revert "net: macsec: update SCI upon MAC address change."
- Revert "xfrm: update SA curlft.use_time", comply with RFC 2367
Previous releases - always broken:
- netfilter: conntrack: work around exceeded TCP receive window
- ipsec: fix a null pointer dereference of dst->dev on a metadata dst
in xfrm_lookup_with_ifid
- moxa: get rid of asymmetry in DMA mapping/unmapping
- dsa: microchip: make learning configurable and keep it off while
standalone
- ice: xsk: prohibit usage of non-balanced queue id
- rxrpc: fix locking in rxrpc's sendmsg
Misc:
- another chunk of sysctl data race silencing"
* tag 'net-6.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (87 commits)
net: lantiq_xrx200: restore buffer if memory allocation failed
net: lantiq_xrx200: fix lock under memory pressure
net: lantiq_xrx200: confirm skb is allocated before using
net: stmmac: work around sporadic tx issue on link-up
ionic: VF initial random MAC address if no assigned mac
ionic: fix up issues with handling EAGAIN on FW cmds
ionic: clear broken state on generation change
rxrpc: Fix locking in rxrpc's sendmsg
net: ethernet: mtk_eth_soc: fix hw hash reporting for MTK_NETSYS_V2
MAINTAINERS: rectify file entry in BONDING DRIVER
i40e: Fix incorrect address type for IPv6 flow rules
ixgbe: stop resetting SYSTIME in ixgbe_ptp_start_cyclecounter
net: Fix a data-race around sysctl_somaxconn.
net: Fix a data-race around netdev_unregister_timeout_secs.
net: Fix a data-race around gro_normal_batch.
net: Fix data-races around sysctl_devconf_inherit_init_net.
net: Fix data-races around sysctl_fb_tunnels_only_for_init_net.
net: Fix a data-race around netdev_budget_usecs.
net: Fix data-races around sysctl_max_skb_frags.
net: Fix a data-race around netdev_budget.
...
|
|
In a situation where memory allocation fails, an invalid buffer address
is stored. When this descriptor is used again, the system panics in the
build_skb() function when accessing memory.
Fixes: 7ea6cd16f159 ("lantiq: net: fix duplicated skb in rx descriptor ring")
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When the xrx200_hw_receive() function returns -ENOMEM, the NAPI poll
function immediately returns an error.
This is incorrect for two reasons:
* the function terminates without enabling interrupts or scheduling NAPI,
* the error code (-ENOMEM) is returned instead of the number of received
packets.
After the first memory allocation failure occurs, packet reception is
locked due to disabled interrupts from DMA..
Fixes: fe1a56420cf2 ("net: lantiq: Add Lantiq / Intel VRX200 Ethernet driver")
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
xrx200_hw_receive() assumes build_skb() always works and goes straight
to skb_reserve(). However, build_skb() can fail under memory pressure.
Add a check in case build_skb() failed to allocate and return NULL.
Fixes: e015593573b3 ("net: lantiq_xrx200: convert to build_skb")
Reported-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This is a follow-up to the discussion in [0]. It seems to me that
at least the IP version used on Amlogic SoC's sometimes has a problem
if register MAC_CTRL_REG is written whilst the chip is still processing
a previous write. But that's just a guess.
Adding a delay between two writes to this register helps, but we can
also simply omit the offending second write. This patch uses the second
approach and is based on a suggestion from Qi Duan.
Benefit of this approach is that we can save few register writes, also
on not affected chip versions.
[0] https://www.spinics.net/lists/netdev/msg831526.html
Fixes: bfab27a146ed ("stmmac: add the experimental PCI support")
Suggested-by: Qi Duan <qi.duan@amlogic.com>
Suggested-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/e99857ce-bd90-5093-ca8c-8cd480b5a0a2@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-08-24 (ixgbe, i40e)
This series contains updates to ixgbe and i40e drivers.
Jake stops incorrect resetting of SYSTIME registers when starting
cyclecounter for ixgbe.
Sylwester corrects a check on source IP address when validating destination
for i40e.
* '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
i40e: Fix incorrect address type for IPv6 flow rules
ixgbe: stop resetting SYSTIME in ixgbe_ptp_start_cyclecounter
====================
Link: https://lore.kernel.org/r/20220824193748.874343-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Assign a random mac address to the VF interface station
address if it boots with a zero mac address in order to match
similar behavior seen in other VF drivers. Handle the errors
where the older firmware does not allow the VF to set its own
station address.
Newer firmware will allow the VF to set the station mac address
if it hasn't already been set administratively through the PF.
Setting it will also be allowed if the VF has trust.
Fixes: fbb39807e9ae ("ionic: support sr-iov operations")
Signed-off-by: R Mohamed Shah <mohamed@pensando.io>
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In looping on FW update tests we occasionally see the
FW_ACTIVATE_STATUS command fail while it is in its EAGAIN loop
waiting for the FW activate step to finsh inside the FW. The
firmware is complaining that the done bit is set when a new
dev_cmd is going to be processed.
Doing a clean on the cmd registers and doorbell before exiting
the wait-for-done and cleaning the done bit before the sleep
prevents this from occurring.
Fixes: fbfb8031533c ("ionic: Add hardware init and device commands")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There is a case found in heavy testing where a link flap happens just
before a firmware Recovery event and the driver gets stuck in the
BROKEN state. This comes from the driver getting interrupted by a FW
generation change when coming back up from the link flap, and the call
to ionic_start_queues() in ionic_link_status_check() fails. This can be
addressed by having the fw_up code clear the BROKEN bit if seen, rather
than waiting for a user to manually force the interface down and then
back up.
Fixes: 9e8eaf8427b6 ("ionic: stop watchdog when in broken state")
Signed-off-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The mmVM_L2_CNTL3 register is not assigned an initial value
Signed-off-by: Qu Huang <jinsdb@126.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Enable GFX11 MGCG perfmon setting.
V2: set rlc to saft mode before setting.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Correct the isa version for handling KFD test.
Fixes: 7c4f4f197e0c ("drm/amdkfd: Add GC 10.3.6 and 10.3.7 KFD definitions")
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
When translate_further is enabled, page table depth needs to
be updated. This was missing on Arcturus MMHUB init. This was
causing address translations to fail for SDMA user-mode queues.
Fixes: 352e683b72e7 ("drm/amdgpu: Enable translate_further to extend UTCL2 reach")
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
To fit the latest 78.53 PMFW.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
For some ASICs, like GFX IP v11.0.1, only have one SDMA instance,
so not need to configure SDMA1_RLC_CGCG_CTRL for this case.
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
DCN314 supports PCON.
[How]
Explicitly enable it in dcn314 resources.
Signed-off-by: Roman Li <roman.li@amd.com>
Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Enable AMD_CG_SUPPORT_BIF_MGCG and AMD_CG_SUPPORT_BIF_LS support.
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add BIF Clock Gating MGCG and LS support for NBIO IP v7.7.0.
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add the BIF0_PCIE_TX_POWER_CTRL_1 register offset and mask macro
definitions for AMD_CG_SUPPORT_BIF_LS.
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The error exit of privcmd_ioctl_dm_op() is calling unlock_pages()
potentially with pages being NULL, leading to a NULL dereference.
Additionally lock_pages() doesn't check for pin_user_pages_fast()
having been completely successful, resulting in potentially not
locking all pages into memory. This could result in sporadic failures
when using the related memory in user mode.
Fix all of that by calling unlock_pages() always with the real number
of pinned pages, which will be zero in case pages being NULL, and by
checking the number of pages pinned by pin_user_pages_fast() matching
the expected number of pages.
Cc: <stable@vger.kernel.org>
Fixes: ab520be8cd5d ("xen/privcmd: Add IOCTL_PRIVCMD_DM_OP")
Reported-by: Rustam Subkhankulov <subkhankulov@ispras.ru>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Link: https://lore.kernel.org/r/20220825141918.3581-1-jgross@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.
Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Link: https://lore.kernel.org/r/20220818210122.7613-1-wsa+renesas@sang-engineering.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Remove the default association from integer maximum value checks. It is
not necessary and has caused a bug in other associations being unnoticed.
Fixes: 923044133367 ("ACPI: property: Unify integer value reading functions")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ACPI node pointers are attached to data node handles, in order to resolve
string references to them. _DSD guide allows the same node to be reached
from multiple parent nodes, leading the node enumeration algorithm to each
such nodes more than once. As attached data already already exists,
attaching data with the same tag will fail. Address this problem by
ignoring nodes that have been already tagged.
Fixes: 1d52f10917a7 ("ACPI: property: Tie data nodes to acpi handles")
Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The current code expects the type of the value to be an integer type,
instead the value passed to the macro is a pointer.
Ensure the size comparison uses the correct pointer type to choose the
max value, instead of using the integer type.
Fixes: 923044133367 ("ACPI: property: Unify integer value reading functions")
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: John Garry <john.garry@huawei.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Properly report hw rx hash for mt7986 chipset accroding to the new dma
descriptor layout.
Fixes: 197c9e9b17b11 ("net: ethernet: mtk_eth_soc: introduce support for mt7986 chipset")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/091394ea4e705fbb35f828011d98d0ba33808f69.1661257293.git.lorenzo@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.
Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The print function dev_err() is redundant because platform_get_irq()
already prints an error.
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=1957
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Add missing pci_disable_device() in error path in chipsfb_pci_init().
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
It's needed to destroy bl_curve_mutex on freeing struct fb_info since
the mutex is embedded in the structure and initialized when it's
allocated.
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
No functional modification involved.
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=1932
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
No functional modification involved.
drivers/video/fbdev/sis/sis_main.c:6165 sisfb_probe() warn: inconsistent indenting.
drivers/video/fbdev/sis/sis_main.c:4266 sisfb_post_300_rwtest() warn: inconsistent indenting.
drivers/video/fbdev/sis/sis_main.c:2388 SISDoSense() warn: inconsistent indenting.
drivers/video/fbdev/sis/sis_main.c:2531 SiS_Sense30x() warn: inconsistent indenting.
drivers/video/fbdev/sis/sis_main.c:2382 SISDoSense() warn: inconsistent indenting.
drivers/video/fbdev/sis/sis_main.c:2250 sisfb_sense_crt1() warn: inconsistent indenting.
drivers/video/fbdev/sis/sis_main.c:672 sisfb_validate_mode() warn: inconsistent indenting.
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=1934
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
In `do_fb_ioctl()` of fbmem.c, if cmd is FBIOPUT_VSCREENINFO, var will be
copied from user, then go through `fb_set_var()` and
`info->fbops->fb_check_var()` which could may be `pm2fb_check_var()`.
Along the path, `var->pixclock` won't be modified. This function checks
whether reciprocal of `var->pixclock` is too high. If `var->pixclock` is
zero, there will be a divide by zero error. So, it is necessary to check
whether denominator is zero to avoid crash. As this bug is found by
Syzkaller, logs are listed below.
divide error in pm2fb_check_var
Call Trace:
<TASK>
fb_set_var+0x367/0xeb0 drivers/video/fbdev/core/fbmem.c:1015
do_fb_ioctl+0x234/0x670 drivers/video/fbdev/core/fbmem.c:1110
fb_ioctl+0xdd/0x130 drivers/video/fbdev/core/fbmem.c:1189
Reported-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Letu Ren <fantasquex@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Delete the redundant word 'set'.
Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The platform_get_irq() returns negative error codes. It can't actually
return zero.
Signed-off-by: Yu Zhe <yuzhe@nfschina.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
