summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-23Merge tag 'staging-4.14-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging and IIO fixes from Greg KH: "Here are a small number of patches to resolve some reported IIO and a staging driver problem. Nothing major here, full details are in the shortlog below. All have been in linux-next with no reported issues" * tag 'staging-4.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: bcm2835-audio: Fix memory corruption iio: adc: at91-sama5d2_adc: fix probe error on missing trigger property iio: adc: dln2-adc: fix build error iio: dummy: events: Add missing break staging: iio: ade7759: fix signed extension bug on shift of a u8 iio: pressure: zpa2326: Remove always-true check which confuses gcc iio: proximity: as3935: noise detection + threshold changes
2017-10-23Merge tag 'char-misc-4.14-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are four small fixes for 4.14-rc6. Three of them are binder driver fixes for reported issues, and the last one is a hyperv driver bugfix. Nothing major, but good fixes to get into 4.14-final. All of these have been in linux-next with no reported issues" * tag 'char-misc-4.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: android: binder: Fix null ptr dereference in debug msg android: binder: Don't get mm from task vmbus: hvsock: add proper sync for vmbus_hvsock_device_unregister() binder: call poll_wait() unconditionally.
2017-10-23Merge tag 'usb-4.14-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/PHY fixes from Greg KH: "Here are a small number of USB and PHY driver fixes for 4.14-rc6 There is the usual musb and xhci fixes in here, as well as some needed phy patches. Also is a nasty regression fix for usbfs that has started to hit a lot of people using virtual machines. All of these have been in linux-next with no reported problems" * tag 'usb-4.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (26 commits) usb: hub: Allow reset retry for USB2 devices on connect bounce USB: core: fix out-of-bounds access bug in usb_get_bos_descriptor() MAINTAINERS: fix git tree url for musb module usb: quirks: add quirk for WORLDE MINI MIDI keyboard usb: musb: sunxi: Explicitly release USB PHY on exit usb: musb: Check for host-mode using is_host_active() on reset interrupt usb: musb: musb_cppi41: Configure the number of channels for DA8xx usb: musb: musb_cppi41: Fix cppi41_set_dma_mode() for DA8xx usb: musb: musb_cppi41: Fix the address of teardown and autoreq registers USB: musb: fix late external abort on suspend USB: musb: fix session-bit runtime-PM quirk usb: cdc_acm: Add quirk for Elatec TWN3 USB: devio: Revert "USB: devio: Don't corrupt user memory" usb: xhci: Handle error condition in xhci_stop_device() usb: xhci: Reset halted endpoint if trb is noop xhci: Cleanup current_cmd in xhci_cleanup_command_queue() xhci: Identify USB 3.1 capable hosts by their port protocol capability USB: serial: metro-usb: add MS7820 device id phy: rockchip-typec: Check for errors from tcphy_phy_init() phy: rockchip-typec: Don't set the aux voltage swing to 400 mV ...
2017-10-22Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fix from Thomas Gleixner: "A single fix to make the cs5535 clock event driver robust agaist spurious interrupts" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clockevents/drivers/cs5535: Improve resilience to spurious interrupts
2017-10-22Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "A set of small fixes mostly in the irq drivers area: - Make the tango irq chip work correctly, which requires a new function in the generiq irq chip implementation - A set of updates to the GIC-V3 ITS driver removing a bogus BUG_ON() and parsing the VCPU table size correctly" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq: generic chip: remove irq_gc_mask_disable_reg_and_ack() irqchip/tango: Use irq_gc_mask_disable_and_ack_set genirq: generic chip: Add irq_gc_mask_disable_and_ack_set() irqchip/gic-v3-its: Add missing changes to support 52bit physical address irqchip/gic-v3-its: Fix the incorrect parsing of VCPU table size irqchip/gic-v3-its: Fix the incorrect BUG_ON in its_init_vpe_domain() DT: arm,gic-v3: Update the ITS size in the examples
2017-10-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: "A little more than usual this time around. Been travelling, so that is part of it. Anyways, here are the highlights: 1) Deal with memcontrol races wrt. listener dismantle, from Eric Dumazet. 2) Handle page allocation failures properly in nfp driver, from Jaku Kicinski. 3) Fix memory leaks in macsec, from Sabrina Dubroca. 4) Fix crashes in pppol2tp_session_ioctl(), from Guillaume Nault. 5) Several fixes in bnxt_en driver, including preventing potential NVRAM parameter corruption from Michael Chan. 6) Fix for KRACK attacks in wireless, from Johannes Berg. 7) rtnetlink event generation fixes from Xin Long. 8) Deadlock in mlxsw driver, from Ido Schimmel. 9) Disallow arithmetic operations on context pointers in bpf, from Jakub Kicinski. 10) Missing sock_owned_by_user() check in sctp_icmp_redirect(), from Xin Long. 11) Only TCP is supported for sockmap, make that explicit with a check, from John Fastabend. 12) Fix IP options state races in DCCP and TCP, from Eric Dumazet. 13) Fix panic in packet_getsockopt(), also from Eric Dumazet. 14) Add missing locked in hv_sock layer, from Dexuan Cui. 15) Various aquantia bug fixes, including several statistics handling cures. From Igor Russkikh et al. 16) Fix arithmetic overflow in devmap code, from John Fastabend. 17) Fix busted socket memory accounting when we get a fault in the tcp zero copy paths. From Willem de Bruijn. 18) Don't leave opt->tot_len uninitialized in ipv6, from Eric Dumazet" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (106 commits) stmmac: Don't access tx_q->dirty_tx before netif_tx_lock ipv6: flowlabel: do not leave opt->tot_len with garbage of_mdio: Fix broken PHY IRQ in case of probe deferral textsearch: fix typos in library helpers rxrpc: Don't release call mutex on error pointer net: stmmac: Prevent infinite loop in get_rx_timestamp_status() net: stmmac: Fix stmmac_get_rx_hwtstamp() net: stmmac: Add missing call to dev_kfree_skb() mlxsw: spectrum_router: Configure TIGCR on init mlxsw: reg: Add Tunneling IPinIP General Configuration Register net: ethtool: remove error check for legacy setting transceiver type soreuseport: fix initialization race net: bridge: fix returning of vlan range op errors sock: correct sk_wmem_queued accounting on efault in tcp zerocopy bpf: add test cases to bpf selftests to cover all access tests bpf: fix pattern matches for direct packet access bpf: fix off by one for range markings with L{T, E} patterns bpf: devmap fix arithmetic overflow in bitmap_size calculation net: aquantia: Bad udp rate on default interrupt coalescing net: aquantia: Enable coalescing management via ethtool interface ...
2017-10-22stmmac: Don't access tx_q->dirty_tx before netif_tx_lockBernd Edlinger
This is the possible reason for different hard to reproduce problems on my ARMv7-SMP test system. The symptoms are in recent kernels imprecise external aborts, and in older kernels various kinds of network stalls and unexpected page allocation failures. My testing indicates that the trouble started between v4.5 and v4.6 and prevails up to v4.14. Using the dirty_tx before acquiring the spin lock is clearly wrong and was first introduced with v4.6. Fixes: e3ad57c96715 ("stmmac: review RX/TX ring management") Signed-off-by: Bernd Edlinger <bernd.edlinger@hotmail.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-22of_mdio: Fix broken PHY IRQ in case of probe deferralGeert Uytterhoeven
If an Ethernet PHY is initialized before the interrupt controller it is connected to, a message like the following is printed: irq: no irq domain found for /interrupt-controller@e61c0000 ! However, the actual error is ignored, leading to a non-functional (POLL) PHY interrupt later: Micrel KSZ8041RNLI ee700000.ethernet-ffffffff:01: attached PHY driver [Micrel KSZ8041RNLI] (mii_bus:phy_addr=ee700000.ethernet-ffffffff:01, irq=POLL) Depending on whether the PHY driver will fall back to polling, Ethernet may or may not work. To fix this: 1. Switch of_mdiobus_register_phy() from irq_of_parse_and_map() to of_irq_get(). Unlike the former, the latter returns -EPROBE_DEFER if the interrupt controller is not yet available, so this condition can be detected. Other errors are handled the same as before, i.e. use the passed mdio->irq[addr] as interrupt. 2. Propagate and handle errors from of_mdiobus_register_phy() and of_mdiobus_register_device(). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-22net: stmmac: Prevent infinite loop in get_rx_timestamp_status()Jose Abreu
Prevent infinite loop by correctly setting the loop condition to break when i == 10. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-22net: stmmac: Fix stmmac_get_rx_hwtstamp()Jose Abreu
When using GMAC4 the valid timestamp is from CTX next desc but we are passing the previous desc to get_rx_timestamp_status() callback. Fix this and while at it rework a little bit the function logic. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-22net: stmmac: Add missing call to dev_kfree_skb()Jose Abreu
When RX HW timestamp is enabled and a frame is discarded we are not freeing the skb but instead only setting to NULL the entry. Add a call to dev_kfree_skb_any() so that skb entry is correctly freed. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-21Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: - joydev now implements a blacklist to avoid creating joystick nodes for accelerometers found in composite devices such as PlaStation controllers - assorted driver fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: ims-psu - check if CDC union descriptor is sane Input: joydev - blacklist ds3/ds4/udraw motion sensors Input: allow matching device IDs on property bits Input: factor out and export input_device_id matching code Input: goodix - poll the 'buffer status' bit before reading data Input: axp20x-pek - fix module not auto-loading for axp221 pek Input: tca8418 - enable interrupt after it has been requested Input: stmfts - fix setting ABS_MT_POSITION_* maximum size Input: ti_am335x_tsc - fix incorrect step config for 5 wire touchscreen Input: synaptics - disable kernel tracking on SMBus devices
2017-10-22mlxsw: spectrum_router: Configure TIGCR on initPetr Machata
Spectrum tunnels do not default to ttl of "inherit" like the Linux ones do. Configure TIGCR on router init so that the TTL of tunnel packets is copied from the overlay packets. Fixes: ee954d1a91b2 ("mlxsw: spectrum_router: Support GRE tunnels") Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-22mlxsw: reg: Add Tunneling IPinIP General Configuration RegisterPetr Machata
The TIGCR register is used for setting up the IPinIP Tunnel configuration. Fixes: ee954d1a91b2 ("mlxsw: spectrum_router: Support GRE tunnels") Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-21Merge tag 'dmaengine-fix-4.14-rc6' of ↵Linus Torvalds
git://git.infradead.org/users/vkoul/slave-dma Pull dmaengine fix from Vinod Koul: "Late fix for altera driver which fixes the locking in driver" * tag 'dmaengine-fix-4.14-rc6' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: altera: Use IRQ-safe spinlock calls in the error paths as well
2017-10-21net: aquantia: Bad udp rate on default interrupt coalescingIgor Russkikh
Default Tx rates cause very long ISR delays on Tx. 0xff is 510us delay, giving only ~ 2000 interrupts per seconds for Tx rings cleanup. With these settings udp tx rate was never higher than ~800Mbps on a single stream. Changing min delay to 0xF makes it way better with ~6Gbps TCP stream performance is almost unaffected by this change, since LSO optimizations play important role. CPU load is affected insignificantly by this change. Signed-off-by: Pavel Belous <pavel.belous@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-21net: aquantia: Enable coalescing management via ethtool interfaceIgor Russkikh
Aquantia NIC allows both TX and RX interrupt throttle rate (ITR) management, but this was used in a very limited way via predefined values. This patch allows to setup ITR default values via module command line arguments and via standard ethtool coalescing settings. Signed-off-by: Pavel Belous <pavel.belous@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-21net: aquantia: mmio unmap was not performed on driver removalIgor Russkikh
That may lead to mmio resource leakage. Signed-off-by: Pavel Belous <pavel.belous@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-21net: aquantia: Limit number of MSIX irqs to the number of cpusIgor Russkikh
There is no much practical use from having MSIX vectors more that number of cpus, thus cap this first with preconfigured limit, then with number of cpus online. Signed-off-by: Pavel Belous <pavel.belous@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-21net: aquantia: Fixed transient link up/down/up notificationIgor Russkikh
When doing ifconfig down/up, driver did not reported carrier_off neither in nic_stop nor in nic_start. That caused link to be visible as "up" during couple of seconds immediately after "ifconfig up". Signed-off-by: Pavel Belous <pavel.belous@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-21net: aquantia: Add queue restarts stats counterIgor Russkikh
Queue stat strings are cleaned up, duplicate stat name strings removed, queue restarts counter added Signed-off-by: Pavel Belous <pavel.belous@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-21net: aquantia: Reset nic statistics on interface up/downIgor Russkikh
Internal statistics system on chip never gets reset until hardware reboot. This is quite inconvenient in terms of ethtool statistics usage. This patch implements incremental statistics update inside of service callback. Upon nic initialization, first request is done to fetch initial stat data, current collected stat data gets cleared. Internal statistics mailbox readout is improved to save space and increase readability Signed-off-by: Pavel Belous <pavel.belous@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-21android: binder: Fix null ptr dereference in debug msgSherry Yang
Don't access next->data in kernel debug message when the next buffer is null. Acked-by: Arve Hjønnevåg <arve@android.com> Signed-off-by: Sherry Yang <sherryy@android.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-21android: binder: Don't get mm from taskSherry Yang
Use binder_alloc struct's mm_struct rather than getting a reference to the mm struct through get_task_mm to avoid a potential deadlock between lru lock, task lock and dentry lock, since a thread can be holding the task lock and the dentry lock while trying to acquire the lru lock. Acked-by: Arve Hjønnevåg <arve@android.com> Signed-off-by: Sherry Yang <sherryy@android.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-21geneve: Fix function matching VNI and tunnel ID on big-endianStefano Brivio
On big-endian machines, functions converting between tunnel ID and VNI use the three LSBs of tunnel ID storage to map VNI. The comparison function eq_tun_id_and_vni(), on the other hand, attempted to map the VNI from the three MSBs. Fix it by using the same check implemented on LE, which maps VNI from the three LSBs of tunnel ID. Fixes: 2e0b26e10352 ("geneve: Optimize geneve device lookup.") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: Jakub Sitnicki <jkbs@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-21Merge tag 'linux-can-fixes-for-4.14-20171019' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2017-10-19 this is a pull request of 11 patches for the upcoming 4.14 release. There are 6 patches by ZHU Yi for the flexcan driver, that work around the CAN error handling state transition problems found in various incarnations of the flexcan IP core. The patch by Colin Ian King fixes a potential NULL pointer deref in the CAN broad cast manager (bcm). One patch by me replaces a direct deref of a RCU protected pointer by rcu_access_pointer. My second patch adds missing OOM error handling in af_can. A patch by Stefan Mätje for the esd_usb2 driver fixes the dlc in received RTR frames. And the last patch is by Wolfgang Grandegger, it fixes a busy loop in the gs_usb driver in case it runs out of TX contexts. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-20Merge tag 'armsoc-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Arnd Bergmann: "Here is another set of bugfixes for ARM SoCs, mostly harmless: - a boot regression fix on ux500 - PCIe interrupts on NXP i.MX7 and on Marvell Armada 7K/8K were wired up wrong, in different ways - Armada XP support for large memory never worked - the socfpga reset controller now builds on 64-bit - minor device tree corrections on gemini, mvebu, r-pi 3, rockchip and at91" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: ux500: Fix regression while init PM domains ARM: dts: fix PCLK name on Gemini and MOXA ART arm64: dts: rockchip: fix typo in iommu nodes arm64: dts: rockchip: correct vqmmc voltage for rk3399 platforms ARM: dts: imx7d: Invert legacy PCI irq mapping bus: mbus: fix window size calculation for 4GB windows ARM: dts: at91: sama5d2: add ADC hw trigger edge type ARM: dts: at91: sama5d2_xplained: enable ADTRG pin ARM: dts: at91: at91-sama5d27_som1: fix PHY ID ARM: dts: bcm283x: Fix console path on RPi3 reset: socfpga: fix for 64-bit compilation ARM: dts: Fix I2C repeated start issue on Armada-38x arm64: dts: marvell: fix interrupt-map property for Armada CP110 PCIe controller arm64: dts: salvator-common: add 12V regulator to backlight ARM: dts: sun6i: Fix endpoint IDs in second display pipeline arm64: allwinner: a64: pine64: Use dcdc1 regulator for mmc0
2017-10-20vmbus: hvsock: add proper sync for vmbus_hvsock_device_unregister()Dexuan Cui
Without the patch, vmbus_hvsock_device_unregister() can destroy the device prematurely when close() is called, and can cause NULl dereferencing or potential data loss (the last portion of the data stream may be dropped prematurely). Signed-off-by: Dexuan Cui <decui@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-20clockevents/drivers/cs5535: Improve resilience to spurious interruptsDavid Kozub
The interrupt handler mfgpt_tick() is not robust versus spurious interrupts which happen before the clock event device is registered and fully initialized. The reason is that the safe guard against spurious interrupts solely checks for the clockevents shutdown state, but lacks a check for detached state. If the interrupt hits while the device is in detached state it passes the safe guard and dereferences the event handler call back which is NULL. Add the missing state check. Fixes: 8f9327cbb6e8 ("clockevents/drivers/cs5535: Migrate to new 'set-state' interface") Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David Kozub <zub@linux.fjfi.cvut.cz> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20171020093103.3317F6004D@linux.fjfi.cvut.cz
2017-10-20Merge tag 'for-linus-4.14c-rc6-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fix from Juergen Gross: "A fix for the Xen pv network drivers (frontend and backend) avoiding the network connection to become unusable due to an illegal MTU" * tag 'for-linus-4.14c-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen-netfront, xen-netback: Use correct minimum MTU values
2017-10-20binder: call poll_wait() unconditionally.Martijn Coenen
Because we're not guaranteed that subsequent calls to poll() will have a poll_table_struct parameter with _qproc set. When _qproc is not set, poll_wait() is a noop, and we won't be woken up correctly. Signed-off-by: Martijn Coenen <maco@android.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-20Merge tag 'mmc-v4.14-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fix from Ulf Hansson: "sdhci-pci: Fix default d3_retune for Intel host controllers" * tag 'mmc-v4.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: sdhci-pci: Fix default d3_retune for Intel host controllers
2017-10-20Merge tag 'drm-fixes-for-v4.14-rc6' of ↵Linus Torvalds
git://people.freedesktop.org/~airlied/linux Pull drm fixes from Dave Airlie: "Standard fixes pull for rc6: one regression fix for amdgpu, a bunch of nouveau fixes that I'd missed a pull req for from Ben last week, some exynos regression fixes, and a few fixes for i915" * tag 'drm-fixes-for-v4.14-rc6' of git://people.freedesktop.org/~airlied/linux: drm/nouveau/fbcon: fix oops without fbdev emulation Revert "drm/amdgpu: discard commands of killed processes" drm/i915: Use a mask when applying WaProgramL3SqcReg1Default drm/i915: Report -EFAULT before pwrite fast path into shmemfs drm/i915/cnl: Fix PLL initialization for HDMI. drm/i915/cnl: Fix PLL mapping. drm/i915: Use bdw_ddi_translations_fdi for Broadwell drm/i915: Fix eviction when the GGTT is idle but full drm/i915/gvt: Fix GPU hang after reusing vGPU instance across different guest OS drm/exynos: Clear drvdata after component unbind drm/exynos: Fix potential NULL pointer dereference in suspend/resume paths drm/nouveau/kms/nv50: fix oops during DP IRQ handling on non-MST boards drm/nouveau/bsp/g92: disable by default drm/nouveau/mmu: flush tlbs before deleting page tables
2017-10-20Merge branch 'i2c/for-current' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "A couple of bugfixes for I2C drivers. Because the changes for the piix4 driver are larger than usual, the patches have been in linux-next for more than a week with no reports coming in. The rest is usual stuff" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: omap: Fix error handling for clk_get() i2c: piix4: Disable completely the IMC during SMBUS_BLOCK_DATA i2c: piix4: Fix SMBus port selection for AMD Family 17h chips i2c: imx: fix misleading bus recovery debug message i2c: imx: use IRQF_SHARED mode to request IRQ i2c: ismt: Separate I2C block read from SMBus block read
2017-10-20dmaengine: altera: Use IRQ-safe spinlock calls in the error paths as wellStefan Roese
The patch edf10919 [dmaengine: altera: fix spinlock usage] missed to change 2 occurrences of spin_unlock_bh() to spin_unlock_irqrestore(). This patch fixes this by moving to the IRQ-safe call in the error paths as well. Fixes: edf10919 (dmaengine: altera: fix spinlock usage) Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Sylvain Lesne <lesne@alse-fr.com> [add fixes tag and fix typo in log] Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-10-19Input: ims-psu - check if CDC union descriptor is saneDmitry Torokhov
Before trying to use CDC union descriptor, try to validate whether that it is sane by checking that intf->altsetting->extra is big enough and that descriptor bLength is not too big and not too small. Reported-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-10-19Input: joydev - blacklist ds3/ds4/udraw motion sensorsRoderick Colenbrander
Introduce a device table used for blacklisting devices. We currently blacklist the motion sensor subdevice of THQ Udraw and Sony ds3/ds4. Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com> [dtor: siwtched to blacklist built on input_device_id and using input_match_device_id()] Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-10-19Input: allow matching device IDs on property bitsDmitry Torokhov
Let's allow matching input devices on their property bits, both in-kernel and when generating module aliases. Tested-by: Roderick Colenbrander <roderick.colenbrander@sony.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-10-19Input: factor out and export input_device_id matching codeDmitry Torokhov
Factor out and export input_match_device_id() so that modules may use it. It will be needed by joydev to blacklist accelerometers in composite devices. Tested-by: Roderick Colenbrander <roderick.colenbrander@sony.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-10-19Input: goodix - poll the 'buffer status' bit before reading dataPaul Cercueil
The Goodix panel triggers an interrupt on touch events. However, its registers will contain the valid values a short time after the interrupt, and not when it's raised. At that moment, the 'buffer status' bit is set. Previously, if the 'buffer status' bit was not set when the registers were read, the data was discarded and no input event was emitted, causing "finger down" or "finger up" events to be missed sometimes. This went unnoticed until v4.9, as the DesignWare I2C driver commonly used with this driver had enough latency for that bug to never trigger until commit 2702ea7dbec5 ("i2c: designware: wait for disable/enable only if necessary"). Now, in the IRQ handler we will poll (with a timeout) the 'buffer status' bit and process the data of the panel as soon as this bit gets set. Note that the Goodix panel will send a few spurious interrupts after the 'finger up' event, in which the 'buffer status' bit will never be set. Cc: Bastien Nocera <hadess@hadess.net> Cc: russianneuromancer@ya.ru Signed-off-by: Paul Cercueil <paul@crapouillou.net> [hdegoede@redhat.com: Change poll loop to use jiffies, add comment about typical poll time] Signed-off-by: Hans de Goede <hdegoede@redhat.com> [dtor: rearranged control flow a bit to avoid explicit goto and double check] Reviewed-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-10-19Input: axp20x-pek - fix module not auto-loading for axp221 pekHans de Goede
Now that we have a platform_device_id table and multiple supported ids we should be using MODULE_DEVICE_TABLE instead of MODULE_ALIAS. This fixes a regression on Bay and Cherry Trail devices, where the power button is now enumerated as an "axp221-pek" and it was impossible to wakeup these devices from suspend since the module did not load. Fixes: c3cc94470bd3 ("Input: axp20x-pek - add support for AXP221 PEK") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-10-19Input: tca8418 - enable interrupt after it has been requestedDamien Riegel
Currently, enabling keypad interrupts is one of the first operations done on the keypad, even before the interrupt is requested, so there is a small time window where the keypad can fire interrupts but the driver is not yet ready to handle them. It's fine for level interrupts because they will be handled anyway, but not so much for edge ones. This commit modifies and moves the function in charge of configuring the keypad. Enabling interrupts is now the last thing done on the keypad, and after the interrupt has been requested by the driver. Writing to the config register was also used to determine if the device was indeed present on the bus or not, this has been replaced by reading the lock/event count register to keep the same functionality. Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2017-10-19Merge tag 'reset-fixes-for-4.14-2' of git://git.pengutronix.de/git/pza/linux ↵Arnd Bergmann
into fixes Pull "Reset controller fixes for v4.14" from Philipp Zabel: Fix SoCFPGA reset controller for 64-bit systems. This patch removes the assumption that BITS_PER_LONG is 32, which is not the case on Stratix10. * tag 'reset-fixes-for-4.14-2' of git://git.pengutronix.de/git/pza/linux: reset: socfpga: fix for 64-bit compilation
2017-10-19Merge tag 'mvebu-fixes-4.14-2' of git://git.infradead.org/linux-mvebu into fixesArnd Bergmann
Pull "mvebu fixes for 4.14 (part 2)" from Gregory CLEMENT Two device tree related fixes: - One on Armada 38x using a other compatible string for I2C in order to cover an errata. - One for Armada 7K/8K fixing a typo on interrupt-map property for PCIe leading to fail PME and AER root port service initialization And the last one for the mbus fixing the window size calculation when it exceed 32bits * tag 'mvebu-fixes-4.14-2' of git://git.infradead.org/linux-mvebu: bus: mbus: fix window size calculation for 4GB windows ARM: dts: Fix I2C repeated start issue on Armada-38x arm64: dts: marvell: fix interrupt-map property for Armada CP110 PCIe controller
2017-10-19net: ena: fix wrong max Tx/Rx queues on ethtoolNetanel Belgazal
ethtool ena_get_channels() expose the max number of queues as the max number of queues ENA supports (128 queues) and not the actual number of created queues. Signed-off-by: Netanel Belgazal <netanel@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-19net: ena: fix rare kernel crash when bar memory remap failsNetanel Belgazal
This failure is rare and only found on testing where deliberately fail devm_ioremap() [ 451.170464] ena 0000:04:00.0: failed to remap regs bar 451.170549] Workqueue: pciehp-1 pciehp_power_thread [ 451.170551] task: ffff88085a5f2d00 task.stack: ffffc9000756c000 [ 451.170552] RIP: 0010:devm_iounmap+0x2d/0x40 [ 451.170553] RSP: 0018:ffffc9000756fac0 EFLAGS: 00010282 [ 451.170554] RAX: 00000000fffffffe RBX: 0000000000000000 RCX: 0000000000000000 [ 451.170555] RDX: ffffffff813a7e00 RSI: 0000000000000282 RDI: 0000000000000282 [ 451.170556] RBP: ffffc9000756fac8 R08: 00000000fffffffe R09: 00000000000009b7 [ 451.170557] R10: 0000000000000005 R11: 00000000000009b6 R12: ffff880856c9d0a0 [ 451.170558] R13: ffffc9000f5c90c0 R14: ffff880856c9d0a0 R15: 0000000000000028 [ 451.170559] FS: 0000000000000000(0000) GS:ffff88085f400000(0000) knlGS:0000000000000000 [ 451.170560] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 451.170561] CR2: 00007f169038b000 CR3: 0000000001c09000 CR4: 00000000003406f0 [ 451.170562] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 451.170562] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 451.170563] Call Trace: [ 451.170572] ena_release_bars.isra.48+0x34/0x60 [ena] [ 451.170574] ena_probe+0x144/0xd90 [ena] [ 451.170579] ? ida_simple_get+0x98/0x100 [ 451.170585] ? kernfs_next_descendant_post+0x40/0x50 [ 451.170591] local_pci_probe+0x45/0xa0 [ 451.170592] pci_device_probe+0x157/0x180 [ 451.170599] driver_probe_device+0x2a8/0x460 [ 451.170600] __device_attach_driver+0x7e/0xe0 [ 451.170602] ? driver_allows_async_probing+0x30/0x30 [ 451.170603] bus_for_each_drv+0x68/0xb0 [ 451.170605] __device_attach+0xdd/0x160 [ 451.170607] device_attach+0x10/0x20 [ 451.170610] pci_bus_add_device+0x4f/0xa0 [ 451.170611] pci_bus_add_devices+0x39/0x70 [ 451.170613] pciehp_configure_device+0x96/0x120 [ 451.170614] pciehp_enable_slot+0x1b3/0x290 [ 451.170616] pciehp_power_thread+0x3b/0xb0 [ 451.170622] process_one_work+0x149/0x360 [ 451.170623] worker_thread+0x4d/0x3c0 [ 451.170626] kthread+0x109/0x140 [ 451.170627] ? rescuer_thread+0x380/0x380 [ 451.170628] ? kthread_park+0x60/0x60 [ 451.170632] ret_from_fork+0x25/0x30 Signed-off-by: Netanel Belgazal <netanel@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-19net: ena: reduce the severity of some printoutsNetanel Belgazal
Decrease log level of checksum errors as these messages can be triggered remotely by bad packets. Signed-off-by: Netanel Belgazal <netanel@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-19can: gs_usb: fix busy loop if no more TX context is availableWolfgang Grandegger
If sending messages with no cable connected, it quickly happens that there is no more TX context available. Then "gs_can_start_xmit()" returns with "NETDEV_TX_BUSY" and the upper layer does retry immediately keeping the CPU busy. To fix that issue, I moved "atomic_dec(&dev->active_tx_urbs)" from "gs_usb_xmit_callback()" to the TX done handling in "gs_usb_receive_bulk_callback()". Renaming "active_tx_urbs" to "active_tx_contexts" and moving it into "gs_[alloc|free]_tx_context()" would also make sense. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-10-19can: esd_usb2: Fix can_dlc value for received RTR, framesStefan Mätje
The dlc member of the struct rx_msg contains also the ESD_RTR flag to mark received RTR frames. Without the fix the can_dlc value for received RTR frames would always be set to 8 by get_can_dlc() instead of the received value. Fixes: 96d8e90382dc ("can: Add driver for esd CAN-USB/2 device") Signed-off-by: Stefan Mätje <stefan.maetje@esd.eu> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>