summaryrefslogtreecommitdiff
path: root/fs/nfsd
AgeCommit message (Collapse)Author
2018-11-02Merge tag 'xfs-4.20-merge-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds
Pull vfs dedup fixes from Dave Chinner: "This reworks the vfs data cloning infrastructure. We discovered many issues with these interfaces late in the 4.19 cycle - the worst of them (data corruption, setuid stripping) were fixed for XFS in 4.19-rc8, but a larger rework of the infrastructure fixing all the problems was needed. That rework is the contents of this pull request. Rework the vfs_clone_file_range and vfs_dedupe_file_range infrastructure to use a common .remap_file_range method and supply generic bounds and sanity checking functions that are shared with the data write path. The current VFS infrastructure has problems with rlimit, LFS file sizes, file time stamps, maximum filesystem file sizes, stripping setuid bits, etc and so they are addressed in these commits. We also introduce the ability for the ->remap_file_range methods to return short clones so that clones for vfs_copy_file_range() don't get rejected if the entire range can't be cloned. It also allows filesystems to sliently skip deduplication of partial EOF blocks if they are not capable of doing so without requiring errors to be thrown to userspace. Existing filesystems are converted to user the new remap_file_range method, and both XFS and ocfs2 are modified to make use of the new generic checking infrastructure" * tag 'xfs-4.20-merge-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (28 commits) xfs: remove [cm]time update from reflink calls xfs: remove xfs_reflink_remap_range xfs: remove redundant remap partial EOF block checks xfs: support returning partial reflink results xfs: clean up xfs_reflink_remap_blocks call site xfs: fix pagecache truncation prior to reflink ocfs2: remove ocfs2_reflink_remap_range ocfs2: support partial clone range and dedupe range ocfs2: fix pagecache truncation prior to reflink ocfs2: truncate page cache for clone destination file before remapping vfs: clean up generic_remap_file_range_prep return value vfs: hide file range comparison function vfs: enable remap callers that can handle short operations vfs: plumb remap flags through the vfs dedupe functions vfs: plumb remap flags through the vfs clone functions vfs: make remap_file_range functions take and return bytes completed vfs: remap helper should update destination inode metadata vfs: pass remap flags to generic_remap_checks vfs: pass remap flags to generic_remap_file_range_prep vfs: combine the clone and dedupe into a single remap_file_range ...
2018-11-01Merge branch 'work.afs' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull AFS updates from Al Viro: "AFS series, with some iov_iter bits included" * 'work.afs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (26 commits) missing bits of "iov_iter: Separate type from direction and use accessor functions" afs: Probe multiple fileservers simultaneously afs: Fix callback handling afs: Eliminate the address pointer from the address list cursor afs: Allow dumping of server cursor on operation failure afs: Implement YFS support in the fs client afs: Expand data structure fields to support YFS afs: Get the target vnode in afs_rmdir() and get a callback on it afs: Calc callback expiry in op reply delivery afs: Fix FS.FetchStatus delivery from updating wrong vnode afs: Implement the YFS cache manager service afs: Remove callback details from afs_callback_break struct afs: Commit the status on a new file/dir/symlink afs: Increase to 64-bit volume ID and 96-bit vnode ID for YFS afs: Don't invoke the server to read data beyond EOF afs: Add a couple of tracepoints to log I/O errors afs: Handle EIO from delivery function afs: Fix TTL on VL server and address lists afs: Implement VL server rotation afs: Improve FS server rotation error handling ...
2018-10-30Merge tag 'nfsd-4.20' of git://linux-nfs.org/~bfields/linuxLinus Torvalds
Pull nfsd updates from Bruce Fields: "Olga added support for the NFSv4.2 asynchronous copy protocol. We already supported COPY, by copying a limited amount of data and then returning a short result, letting the client resend. The asynchronous protocol should offer better performance at the expense of some complexity. The other highlight is Trond's work to convert the duplicate reply cache to a red-black tree, and to move it and some other server caches to RCU. (Previously these have meant taking global spinlocks on every RPC) Otherwise, some RDMA work and miscellaneous bugfixes" * tag 'nfsd-4.20' of git://linux-nfs.org/~bfields/linux: (30 commits) lockd: fix access beyond unterminated strings in prints nfsd: Fix an Oops in free_session() nfsd: correctly decrement odstate refcount in error path svcrdma: Increase the default connection credit limit svcrdma: Remove try_module_get from backchannel svcrdma: Remove ->release_rqst call in bc reply handler svcrdma: Reduce max_send_sges nfsd: fix fall-through annotations knfsd: Improve lookup performance in the duplicate reply cache using an rbtree knfsd: Further simplify the cache lookup knfsd: Simplify NFS duplicate replay cache knfsd: Remove dead code from nfsd_cache_lookup SUNRPC: Simplify TCP receive code SUNRPC: Replace the cache_detail->hash_lock with a regular spinlock SUNRPC: Remove non-RCU protected lookup NFS: Fix up a typo in nfs_dns_ent_put NFS: Lockless DNS lookups knfsd: Lockless lookup of NFSv4 identities. SUNRPC: Lockless server RPCSEC_GSS context lookup knfsd: Allow lockless lookups of the exports ...
2018-10-30vfs: plumb remap flags through the vfs clone functionsDarrick J. Wong
Plumb a remap_flags argument through the {do,vfs}_clone_file_range functions so that clone can take advantage of it. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2018-10-30vfs: make remap_file_range functions take and return bytes completedDarrick J. Wong
Change the remap_file_range functions to take a number of bytes to operate upon and return the number of bytes they operated on. This is a requirement for allowing fs implementations to return short clone/dedupe results to the user, which will enable us to obey resource limits in a graceful manner. A subsequent patch will enable copy_file_range to signal to the ->clone_file_range implementation that it can handle a short length, which will be returned in the function's return value. For now the short return is not implemented anywhere so the behavior won't change -- either copy_file_range manages to clone the entire range or it tries an alternative. Neither clone ioctl can take advantage of this, alas. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2018-10-29nfsd: correctly decrement odstate refcount in error pathAndrew Elble
alloc_init_deleg() both allocates an nfs4_delegation, and bumps the refcount on odstate. So after this point, we need to put_clnt_odstate() and nfs4_put_stid() to not leave the odstate refcount inappropriately bumped. Signed-off-by: Andrew Elble <aweits@rit.edu> Reviewed-by: Jeff Layton <jlayton@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-10-29nfsd: fix fall-through annotationsGustavo A. R. Silva
Replace "fallthru" with a proper "fall through" annotation. Also, add an annotation were it is expected to fall through. These fixes are part of the ongoing efforts to enabling -Wimplicit-fallthrough Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-10-29knfsd: Improve lookup performance in the duplicate reply cache using an rbtreeTrond Myklebust
Use an rbtree to ensure the lookup/insert of an entry in a DRC bucket is O(log(N)). Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-10-29knfsd: Further simplify the cache lookupTrond Myklebust
Order the structure so that the key can be compared using memcmp(). Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-10-29knfsd: Simplify NFS duplicate replay cacheTrond Myklebust
Simplify the duplicate replay cache by initialising the preallocated cache entry, so that we can use it as a key for the cache lookup. Note that the 99.999% case we want to optimise for is still the one where the lookup fails, and we have to add this entry to the cache, so preinitialising should not cause a performance penalty. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-10-29knfsd: Remove dead code from nfsd_cache_lookupTrond Myklebust
The preallocated cache entry is always set to type RC_NOCACHE, and that type isn't changed until we later call nfsd_cache_update(). Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-10-29knfsd: Lockless lookup of NFSv4 identities.Trond Myklebust
Enable RCU protected lookups of the NFSv4 idmap. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-10-29knfsd: Allow lockless lookups of the exportsTrond Myklebust
Convert structs svc_expkey and svc_export to allow RCU protected lookups. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-10-24iov_iter: Separate type from direction and use accessor functionsDavid Howells
In the iov_iter struct, separate the iterator type from the iterator direction and use accessor functions to access them in most places. Convert a bunch of places to use switch-statements to access them rather then chains of bitwise-AND statements. This makes it easier to add further iterator types. Also, this can be more efficient as to implement a switch of small contiguous integers, the compiler can use ~50% fewer compare instructions than it has to use bitwise-and instructions. Further, cease passing the iterator type into the iterator setup function. The iterator function can set that itself. Only the direction is required. Signed-off-by: David Howells <dhowells@redhat.com>
2018-09-25nfsd: remove set but not used variable 'dirp'YueHaibing
Fixes gcc '-Wunused-but-set-variable' warning: fs/nfsd/vfs.c: In function 'nfsd_create': fs/nfsd/vfs.c:1279:16: warning: variable 'dirp' set but not used [-Wunused-but-set-variable] Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-09-25NFSD introduce async copy featureOlga Kornievskaia
Upon receiving a request for async copy, create a new kthread. If we get asynchronous request, make sure to copy the needed arguments/state from the stack before starting the copy. Then start the thread and reply back to the client indicating copy is asynchronous. nfsd_copy_file_range() will copy in a loop over the total number of bytes is needed to copy. In case a failure happens in the middle, we ignore the error and return how much we copied so far. Once done creating a workitem for the callback workqueue and send CB_OFFLOAD with the results. The lifetime of the copy stateid is bound to the vfs copy. This way we don't need to keep the nfsd_net structure for the callback. We could keep it around longer so that an OFFLOAD_STATUS that came late would still get results, but clients should be able to deal without that. We handle OFFLOAD_CANCEL by sending a signal to the copy thread and calling kthread_stop. A client should cancel any ongoing copies before calling DESTROY_CLIENT; if not, we return a CLIENT_BUSY error. If the client is destroyed for some other reason (lease expiration, or server shutdown), we must clean up any ongoing copies ourselves. Signed-off-by: Olga Kornievskaia <kolga@netapp.com> [colin.king@canonical.com: fix leak in error case] [bfields@fieldses.org: remove signalling, merge patches] Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-09-25NFSD OFFLOAD_CANCEL xdrOlga Kornievskaia
Signed-off-by: Olga Kornievskaia <kolga@netapp.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-09-25NFSD OFFLOAD_STATUS xdrOlga Kornievskaia
Signed-off-by: Olga Kornievskaia <kolga@netapp.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-09-25NFSD CB_OFFLOAD xdrOlga Kornievskaia
Signed-off-by: Olga Kornievskaia <kolga@netapp.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-09-24vfs: swap names of {do,vfs}_clone_file_range()Amir Goldstein
Commit 031a072a0b8a ("vfs: call vfs_clone_file_range() under freeze protection") created a wrapper do_clone_file_range() around vfs_clone_file_range() moving the freeze protection to former, so overlayfs could call the latter. The more common vfs practice is to call do_xxx helpers from vfs_xxx helpers, where freeze protecction is taken in the vfs_xxx helper, so this anomality could be a source of confusion. It seems that commit 8ede205541ff ("ovl: add reflink/copyfile/dedup support") may have fallen a victim to this confusion - ovl_clone_file_range() calls the vfs_clone_file_range() helper in the hope of getting freeze protection on upper fs, but in fact results in overlayfs allowing to bypass upper fs freeze protection. Swap the names of the two helpers to conform to common vfs practice and call the correct helpers from overlayfs and nfsd. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-08-23Merge tag 'nfsd-4.19-1' of git://linux-nfs.org/~bfields/linuxLinus Torvalds
Pull nfsd updates from Bruce Fields: "Chuck Lever fixed a problem with NFSv4.0 callbacks over GSS from multi-homed servers. The only new feature is a minor bit of protocol (change_attr_type) which the client doesn't even use yet. Other than that, various bugfixes and cleanup" * tag 'nfsd-4.19-1' of git://linux-nfs.org/~bfields/linux: (27 commits) sunrpc: Add comment defining gssd upcall API keywords nfsd: Remove callback_cred nfsd: Use correct credential for NFSv4.0 callback with GSS sunrpc: Extract target name into svc_cred sunrpc: Enable the kernel to specify the hostname part of service principals sunrpc: Don't use stack buffer with scatterlist rpc: remove unneeded variable 'ret' in rdma_listen_handler nfsd: use true and false for boolean values nfsd: constify write_op[] fs/nfsd: Delete invalid assignment statements in nfsd4_decode_exchange_id NFSD: Handle full-length symlinks NFSD: Refactor the generic write vector fill helper svcrdma: Clean up Read chunk path svcrdma: Avoid releasing a page in svc_xprt_release() nfsd: Mark expected switch fall-through sunrpc: remove redundant variables 'checksumlen','blocksize' and 'data' nfsd: fix leaked file lock with nfs exported overlayfs nfsd: don't advertise a SCSI layout for an unsupported request_queue nfsd: fix corrupted reply to badly ordered compound nfsd: clarify check_op_ordering ...
2018-08-22nfsd: Remove callback_credChuck Lever
Clean up: The global callback_cred is no longer used, so it can be removed. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-08-22nfsd: Use correct credential for NFSv4.0 callback with GSSChuck Lever
I've had trouble when operating a multi-homed Linux NFS server with Kerberos using NFSv4.0. Lately, I've seen my clients reporting this (and then hanging): May 9 11:43:26 manet kernel: NFS: NFSv4 callback contains invalid cred The client-side commit f11b2a1cfbf5 ("nfs4: copy acceptor name from context to nfs_client") appears to be related, but I suspect this problem has been going on for some time before that. RFC 7530 Section 3.3.3 says: > For Kerberos V5, nfs/hostname would be a server principal in the > Kerberos Key Distribution Center database. This is the same > principal the client acquired a GSS-API context for when it issued > the SETCLIENTID operation ... In other words, an NFSv4.0 client expects that the server will use the same GSS principal for callback that the client used to establish its lease. For example, if the client used the service principal "nfs@server.domain" to establish its lease, the server is required to use "nfs@server.domain" when performing NFSv4.0 callback operations. The Linux NFS server currently does not. It uses a common service principal for all callback connections. Sometimes this works as expected, and other times -- for example, when the server is accessible via multiple hostnames -- it won't work at all. This patch scrapes the target name from the client credential, and uses that for the NFSv4.0 callback credential. That should be correct much more often. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-08-22sunrpc: Extract target name into svc_credChuck Lever
NFSv4.0 callback needs to know the GSS target name the client used when it established its lease. That information is available from the GSS context created by gssproxy. Make it available in each svc_cred. Note this will also give us access to the real target service principal name (which is typically "nfs", but spec does not require that). Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-08-09nfsd: use true and false for boolean valuesGustavo A. R. Silva
Return statements in functions returning bool should use true or false instead of an integer value. This issue was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-08-09nfsd: constify write_op[]Eric Biggers
write_op[] is never modified, so make it 'const'. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-08-09fs/nfsd: Delete invalid assignment statements in nfsd4_decode_exchange_idnixiaoming
READ_BUF(8); dummy = be32_to_cpup(p++); dummy = be32_to_cpup(p++); ... READ_BUF(4); dummy = be32_to_cpup(p++); Assigning value to "dummy" here, but that stored value is overwritten before it can be used. At the same time READ_BUF() will re-update the pointer p. delete invalid assignment statements Signed-off-by: nixiaoming <nixiaoming@huawei.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <trondmy@hammerspace.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-08-09NFSD: Handle full-length symlinksChuck Lever
I've given up on the idea of zero-copy handling of SYMLINK on the server side. This is because the Linux VFS symlink API requires the symlink pathname to be in a NUL-terminated kmalloc'd buffer. The NUL-termination is going to be problematic (watching out for landing on a page boundary and dealing with a 4096-byte pathname). I don't believe that SYMLINK creation is on a performance path or is requested frequently enough that it will cause noticeable CPU cache pollution due to data copies. There will be two places where a transport callout will be necessary to fill in the rqstp: one will be in the svc_fill_symlink_pathname() helper that is used by NFSv2 and NFSv3, and the other will be in nfsd4_decode_create(). Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-08-09NFSD: Refactor the generic write vector fill helperChuck Lever
fill_in_write_vector() is nearly the same logic as svc_fill_write_vector(), but there are a few differences so that the former can handle multiple WRITE payloads in a single COMPOUND. svc_fill_write_vector() can be adjusted so that it can be used in the NFSv4 WRITE code path too. Instead of assuming the pages are coming from rq_args.pages, have the caller pass in the page list. The immediate benefit is a reduction of code duplication. It also prevents the NFSv4 WRITE decoder from passing an empty vector element when the transport has provided the payload in the xdr_buf's page array. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-08-09nfsd: Mark expected switch fall-throughGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Warning level 2 was used: -Wimplicit-fallthrough=2 Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-08-09nfsd: fix leaked file lock with nfs exported overlayfsAmir Goldstein
nfsd and lockd call vfs_lock_file() to lock/unlock the inode returned by locks_inode(file). Many places in nfsd/lockd code use the inode returned by file_inode(file) for lock manipulation. With Overlayfs, file_inode() (the underlying inode) is not the same object as locks_inode() (the overlay inode). This can result in "Leaked POSIX lock" messages and eventually to a kernel crash as reported by Eddie Horng: https://marc.info/?l=linux-unionfs&m=153086643202072&w=2 Fix all the call sites in nfsd/lockd that should use locks_inode(). This is a correctness bug that manifested when overlayfs gained NFS export support in v4.16. Reported-by: Eddie Horng <eddiehorng.tw@gmail.com> Tested-by: Eddie Horng <eddiehorng.tw@gmail.com> Cc: Jeff Layton <jlayton@kernel.org> Fixes: 8383f1748829 ("ovl: wire up NFS export operations") Cc: stable@vger.kernel.org Signed-off-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-07-12IMA: don't propagate opened through the entire thingAl Viro
just check ->f_mode in ima_appraise_measurement() Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-06-19nfsd: don't advertise a SCSI layout for an unsupported request_queueBenjamin Coddington
Commit 30181faae37f ("nfsd: Check queue type before submitting a SCSI request") did the work of ensuring that we don't send SCSI requests to a request queue that won't support them, but that check is in the GETDEVICEINFO path. Let's not set the SCSI layout in fs_layout_type in the first place, and then we'll have less clients sending GETDEVICEINFO for non-SCSI request queues and less unnecessary WARN_ONs. While we're in here, remove some outdated comments that refer to "overwriting" layout seletion because commit 8a4c3926889e ("nfsd: allow nfsd to advertise multiple layout types") changed things to no longer overwrite the layout type. Signed-off-by: Benjamin Coddington <bcodding@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-06-17nfsd: fix corrupted reply to badly ordered compoundJ. Bruce Fields
We're encoding a single op in the reply but leaving the number of ops zero, so the reply makes no sense. Somewhat academic as this isn't a case any real client will hit, though in theory perhaps that could change in a future protocol extension. Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-06-17nfsd: clarify check_op_orderingJ. Bruce Fields
Document a couple things that confused me on a recent reading. Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-06-17nfsd: update obselete comment referencing the BKLJ. Bruce Fields
It's inode->i_lock that's now taken in setlease and break_lease, instead of the big kernel lock. Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-06-17nfsd4: cleanup sessionid in nfsd4_destroy_sessionJ. Bruce Fields
The name of this variable doesn't fit the type. And we only ever use one field of it. Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-06-17nfsd4: less confusing nfsd4_compound_in_sessionJ. Bruce Fields
Make the function prototype match the name a little better. Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-06-17nfsd4: support change_attr_type attributeJ. Bruce Fields
The change attribute is what is used by clients to revalidate their caches. Our server may use i_version or ctime for that purpose. Those choices behave slightly differently, and it may be useful to the client to know which we're using. This attribute tells the client that. The Linux client doesn't yet use this attribute yet, though. Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-06-17nfsd: fix NFSv4 time_delta attributeJ. Bruce Fields
Currently we return the worst-case value of 1 second in the time delta attribute. That's not terribly useful. Instead, return a value calculated from the time granularity supported by the filesystem and the system clock. Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-06-17nfsd4: return default lease periodJ. Bruce Fields
I don't have a good rationale for the lease period, but 90 seconds seems long, and as long as we're allowing the server to extend the grace period up to double the lease period, let's half the default to 45. Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-06-17nfsd4: extend reclaim period for reclaiming clientsJ. Bruce Fields
If the client is only renewing state a little sooner than once a lease period, then it might not discover the server has restarted till close to the end of the grace period, and might run out of time to do the actual reclaim. Extend the grace period by a second each time we notice there are clients still trying to reclaim, up to a limit of another whole lease period. Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-06-15Merge tag 'vfs-timespec64' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground Pull inode timestamps conversion to timespec64 from Arnd Bergmann: "This is a late set of changes from Deepa Dinamani doing an automated treewide conversion of the inode and iattr structures from 'timespec' to 'timespec64', to push the conversion from the VFS layer into the individual file systems. As Deepa writes: 'The series aims to switch vfs timestamps to use struct timespec64. Currently vfs uses struct timespec, which is not y2038 safe. The series involves the following: 1. Add vfs helper functions for supporting struct timepec64 timestamps. 2. Cast prints of vfs timestamps to avoid warnings after the switch. 3. Simplify code using vfs timestamps so that the actual replacement becomes easy. 4. Convert vfs timestamps to use struct timespec64 using a script. This is a flag day patch. Next steps: 1. Convert APIs that can handle timespec64, instead of converting timestamps at the boundaries. 2. Update internal data structures to avoid timestamp conversions' Thomas Gleixner adds: 'I think there is no point to drag that out for the next merge window. The whole thing needs to be done in one go for the core changes which means that you're going to play that catchup game forever. Let's get over with it towards the end of the merge window'" * tag 'vfs-timespec64' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground: pstore: Remove bogus format string definition vfs: change inode times to use struct timespec64 pstore: Convert internal records to timespec64 udf: Simplify calls to udf_disk_stamp_to_time fs: nfs: get rid of memcpys for inode times ceph: make inode time prints to be long long lustre: Use long long type to print inode time fs: add timespec64_truncate()
2018-06-14Merge branch 'vfs_timespec64' of https://github.com/deepa-hub/vfs into ↵Arnd Bergmann
vfs-timespec64 Pull the timespec64 conversion from Deepa Dinamani: "The series aims to switch vfs timestamps to use struct timespec64. Currently vfs uses struct timespec, which is not y2038 safe. The flag patch applies cleanly. I've not seen the timestamps update logic change often. The series applies cleanly on 4.17-rc6 and linux-next tip (top commit: next-20180517). I'm not sure how to merge this kind of a series with a flag patch. We are targeting 4.18 for this. Let me know if you have other suggestions. The series involves the following: 1. Add vfs helper functions for supporting struct timepec64 timestamps. 2. Cast prints of vfs timestamps to avoid warnings after the switch. 3. Simplify code using vfs timestamps so that the actual replacement becomes easy. 4. Convert vfs timestamps to use struct timespec64 using a script. This is a flag day patch. I've tried to keep the conversions with the script simple, to aid in the reviews. I've kept all the internal filesystem data structures and function signatures the same. Next steps: 1. Convert APIs that can handle timespec64, instead of converting timestamps at the boundaries. 2. Update internal data structures to avoid timestamp conversions." I've pulled it into a branch based on top of the NFS changes that are now in mainline, so I could resolve the non-obvious conflict between the two while merging. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2018-06-12Merge tag 'overflow-v4.18-rc1-part2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull more overflow updates from Kees Cook: "The rest of the overflow changes for v4.18-rc1. This includes the explicit overflow fixes from Silvio, further struct_size() conversions from Matthew, and a bug fix from Dan. But the bulk of it is the treewide conversions to use either the 2-factor argument allocators (e.g. kmalloc(a * b, ...) into kmalloc_array(a, b, ...) or the array_size() macros (e.g. vmalloc(a * b) into vmalloc(array_size(a, b)). Coccinelle was fighting me on several fronts, so I've done a bunch of manual whitespace updates in the patches as well. Summary: - Error path bug fix for overflow tests (Dan) - Additional struct_size() conversions (Matthew, Kees) - Explicitly reported overflow fixes (Silvio, Kees) - Add missing kvcalloc() function (Kees) - Treewide conversions of allocators to use either 2-factor argument variant when available, or array_size() and array3_size() as needed (Kees)" * tag 'overflow-v4.18-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (26 commits) treewide: Use array_size in f2fs_kvzalloc() treewide: Use array_size() in f2fs_kzalloc() treewide: Use array_size() in f2fs_kmalloc() treewide: Use array_size() in sock_kmalloc() treewide: Use array_size() in kvzalloc_node() treewide: Use array_size() in vzalloc_node() treewide: Use array_size() in vzalloc() treewide: Use array_size() in vmalloc() treewide: devm_kzalloc() -> devm_kcalloc() treewide: devm_kmalloc() -> devm_kmalloc_array() treewide: kvzalloc() -> kvcalloc() treewide: kvmalloc() -> kvmalloc_array() treewide: kzalloc_node() -> kcalloc_node() treewide: kzalloc() -> kcalloc() treewide: kmalloc() -> kmalloc_array() mm: Introduce kvcalloc() video: uvesafb: Fix integer overflow in allocation UBIFS: Fix potential integer overflow in allocation leds: Use struct_size() in allocation Convert intel uncore to struct_size ...
2018-06-12treewide: Use array_size() in vzalloc()Kees Cook
The vzalloc() function has no 2-factor argument form, so multiplication factors need to be wrapped in array_size(). This patch replaces cases of: vzalloc(a * b) with: vzalloc(array_size(a, b)) as well as handling cases of: vzalloc(a * b * c) with: vzalloc(array3_size(a, b, c)) This does, however, attempt to ignore constant size factors like: vzalloc(4 * 1024) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( vzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | vzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( vzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(u8) * COUNT + COUNT , ...) | vzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | vzalloc( - sizeof(char) * COUNT + COUNT , ...) | vzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( vzalloc( - sizeof(TYPE) * (COUNT_ID) + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT_ID + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT_CONST + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vzalloc( - sizeof(THING) * (COUNT_ID) + array_size(COUNT_ID, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT_ID + array_size(COUNT_ID, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT_CONST + array_size(COUNT_CONST, sizeof(THING)) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ vzalloc( - SIZE * COUNT + array_size(COUNT, SIZE) , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( vzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( vzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | vzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( vzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( vzalloc(C1 * C2 * C3, ...) | vzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants. @@ expression E1, E2; constant C1, C2; @@ ( vzalloc(C1 * C2, ...) | vzalloc( - E1 * E2 + array_size(E1, E2) , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12treewide: kmalloc() -> kmalloc_array()Kees Cook
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12Merge tag 'nfsd-4.18' of git://linux-nfs.org/~bfields/linuxLinus Torvalds
Pull nfsd updates from Bruce Fields: "A relatively quiet cycle for nfsd. The largest piece is an RDMA update from Chuck Lever with new trace points, miscellaneous cleanups, and streamlining of the send and receive paths. Other than that, some miscellaneous bugfixes" * tag 'nfsd-4.18' of git://linux-nfs.org/~bfields/linux: (26 commits) nfsd: fix error handling in nfs4_set_delegation() nfsd: fix potential use-after-free in nfsd4_decode_getdeviceinfo Fix 16-byte memory leak in gssp_accept_sec_context_upcall svcrdma: Fix incorrect return value/type in svc_rdma_post_recvs svcrdma: Remove unused svc_rdma_op_ctxt svcrdma: Persistently allocate and DMA-map Send buffers svcrdma: Simplify svc_rdma_send() svcrdma: Remove post_send_wr svcrdma: Don't overrun the SGE array in svc_rdma_send_ctxt svcrdma: Introduce svc_rdma_send_ctxt svcrdma: Clean up Send SGE accounting svcrdma: Refactor svc_rdma_dma_map_buf svcrdma: Allocate recv_ctxt's on CPU handling Receives svcrdma: Persistently allocate and DMA-map Receive buffers svcrdma: Preserve Receive buffer until svc_rdma_sendto svcrdma: Simplify svc_rdma_recv_ctxt_put svcrdma: Remove sc_rq_depth svcrdma: Introduce svc_rdma_recv_ctxt svcrdma: Trace key RDMA API events svcrdma: Trace key RPC/RDMA protocol events ...
2018-06-08nfsd: fix error handling in nfs4_set_delegation()Andrew Elble
I noticed a memory corruption crash in nfsd in 4.17-rc1. This patch corrects the issue. Fix to return error if the delegation couldn't be hashed or there was a recall in progress. Use the existing error path instead of destroy_delegation() for readability. Signed-off-by: Andrew Elble <aweits@rit.edu> Fixes: 353601e7d323c ("nfsd: create a separate lease for each delegation") Signed-off-by: J. Bruce Fields <bfields@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-06 15:14:01 +0000