summaryrefslogtreecommitdiff
path: root/fs
AgeCommit message (Collapse)Author
2018-01-29xfs: avoid setting XFS_ILOG_CORE if i_version doesn't need incrementingJeff Layton
If XFS_ILOG_CORE is already set then go ahead and increment it. Signed-off-by: Jeff Layton <jlayton@redhat.com> Acked-by: Darrick J. Wong <darrick.wong@oracle.com> Acked-by: Dave Chinner <dchinner@redhat.com>
2018-01-29fs: only set S_VERSION when updating times if necessaryJeff Layton
We only really need to update i_version if someone has queried for it since we last incremented it. By doing that, we can avoid having to update the inode if the times haven't changed. If the times have changed, then we go ahead and forcibly increment the counter, under the assumption that we'll be going to the storage anyway, and the increment itself is relatively cheap. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz>
2018-01-29xfs: convert to new i_version APIJeff Layton
Signed-off-by: Jeff Layton <jlayton@redhat.com> Acked-by: Darrick J. Wong <darrick.wong@oracle.com> Acked-by: Dave Chinner <dchinner@redhat.com>
2018-01-29ufs: use new i_version APIJeff Layton
Signed-off-by: Jeff Layton <jlayton@redhat.com>
2018-01-29ocfs2: convert to new i_version APIJeff Layton
Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz>
2018-01-29nfsd: convert to new i_version APIJeff Layton
Mostly just making sure we use the "get" wrappers so we know when it is being fetched for later use. Signed-off-by: Jeff Layton <jlayton@redhat.com>
2018-01-29nfs: convert to new i_version APIJeff Layton
For NFS, we just use the "raw" API since the i_version is mostly managed by the server. The exception there is when the client holds a write delegation, but we only need to bump it once there anyway to handle CB_GETATTR. Tested-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Jeff Layton <jlayton@redhat.com>
2018-01-29ext4: convert to new i_version APIJeff Layton
Signed-off-by: Jeff Layton <jlayton@redhat.com> Acked-by: Theodore Ts'o <tytso@mit.edu>
2018-01-29ext2: convert to new i_version APIJeff Layton
Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz>
2018-01-29exofs: switch to new i_version APIJeff Layton
Signed-off-by: Jeff Layton <jlayton@redhat.com>
2018-01-29btrfs: convert to new i_version APIJeff Layton
Signed-off-by: Jeff Layton <jlayton@redhat.com> Acked-by: David Sterba <dsterba@suse.com>
2018-01-29afs: convert to new i_version APIJeff Layton
For AFS, it's generally treated as an opaque value, so we use the *_raw variants of the API here. Note that AFS has quite a different definition for this counter. AFS only increments it on changes to the data to the data in regular files and contents of the directories. Inode metadata changes do not result in a version increment. We'll need to reconcile that somehow if we ever want to present this to userspace via statx. Signed-off-by: Jeff Layton <jlayton@redhat.com>
2018-01-29affs: convert to new i_version APIJeff Layton
Signed-off-by: Jeff Layton <jlayton@redhat.com>
2018-01-29fat: convert to new i_version APIJeff Layton
Signed-off-by: Jeff Layton <jlayton@redhat.com>
2018-01-29fs: new API for handling inode->i_versionJeff Layton
Add a documentation blob that explains what the i_version field is, how it is expected to work, and how it is currently implemented by various filesystems. We already have inode_inc_iversion. Add several other functions for manipulating and accessing the i_version counter. For now, the implementation is trivial and basically works the way that all of the open-coded i_version accesses work today. Future patches will convert existing users of i_version to use the new API, and then convert the backend implementation to do things more efficiently. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz>
2018-01-28NFS: Fix a race between mmap() and O_DIRECTTrond Myklebust
When locking the file in order to do O_DIRECT on it, we must unmap any mmapped ranges on the pagecache so that we can flush out the dirty data. Fixes: a5864c999de67 ("NFS: Do not serialise O_DIRECT reads and writes") Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Cc: stable@vger.kernel.org # v4.8+
2018-01-28fs/cifs/cifsacl.c Fixes typo in a commentAchilles Gaikwad
Signed-off-by: Achilles Gaikwad <achillesgaikwad@gmail.com> Signed-off-by: Steve French <smfrench@gmail.com>
2018-01-28NFS: Remove a redundant call to unmap_mapping_range()Trond Myklebust
We don't need to call unmap_mapping_range() prior to calling nfs_sync_mapping(). Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2018-01-26update internal version number for cifs.koSteve French
To version 2.11 Signed-off-by: Steve French <smfrench@gmail.com>
2018-01-26cifs: add .splice_writeAndrés Souto
add splice_write support in cifs vfs using iter_file_splice_write Signed-off-by: Andrés Souto <kai670@gmail.com> Signed-off-by: Steve French <smfrench@gmail.com>
2018-01-26CIFS: document tcon/ses/server refcount danceAurelien Aptel
Signed-off-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <smfrench@gmail.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
2018-01-26move a few externs to smbdirect.h to eliminate warningSteve French
Quiet minor sparse warnings in new SMB3 rdma patch series ("symbol was not declared ...") by moving these externs to smbdirect.h Signed-off-by: Steve French <smfrench@gmail.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
2018-01-26CIFS: zero sensitive data when freeingAurelien Aptel
also replaces memset()+kfree() by kzfree(). Signed-off-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <smfrench@gmail.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com> Cc: <stable@vger.kernel.org>
2018-01-26Cleanup some minor endian issues in smb3 rdmaSteve French
Minor cleanup of some sparse warnings (including a few misc endian fixes for the new smb3 rdma code) Signed-off-by: Steve French <smfrench@gmail.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
2018-01-26CIFS: dump IPC tcon in debug proc fileAurelien Aptel
dump it as first share with an "IPC: " prefix. Signed-off-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <smfrench@gmail.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
2018-01-26CIFS: use tcon_ipc instead of use_ipc parameter of SMB2_ioctlAurelien Aptel
Since IPC now has a tcon object, the caller can just pass it. This allows domain-based DFS requests to work with smb2+. Link: https://bugzilla.samba.org/show_bug.cgi?id=12917 Fixes: 9d49640a21bf ("CIFS: implement get_dfs_refer for SMB2+") Signed-off-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <smfrench@gmail.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
2018-01-26CIFS: make IPC a regular tconAurelien Aptel
* Remove ses->ipc_tid. * Make IPC$ regular tcon. * Add a direct pointer to it in ses->tcon_ipc. * Distinguish PIPE tcon from IPC tcon by adding a tcon->pipe flag. All IPC tcons are pipes but not all pipes are IPC. * All TreeConnect functions now cannot take a NULL tcon object. The IPC tcon has the same lifetime as the session it belongs to. It is created when the session is created and destroyed when the session is destroyed. Since no mounts directly refer to the IPC tcon, its refcount should always be set to initialisation value (1). Thus we make sure cifs_put_tcon() skips it. If the mount request resulting in a new session being created requires encryption, try to require it too for IPC. * set SERVER_NAME_LENGTH to serverName actual size The maximum length of an ipv6 string representation is defined in INET6_ADDRSTRLEN as 45+1 for null but lets keep what we know works. Signed-off-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Steve French <smfrench@gmail.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
2018-01-25orangefs: fix deadlock; do not write i_size in read_iterMartin Brandenburg
After do_readv_writev, the inode cache is invalidated anyway, so i_size will never be read. It will be fetched from the server which will also know about updates from other machines. Fixes deadlock on 32-bit SMP. See https://marc.info/?l=linux-fsdevel&m=151268557427760&w=2 Signed-off-by: Martin Brandenburg <martin@omnibond.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Mike Marshall <hubcap@omnibond.com> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-01-25jffs2: Fix use-after-free bug in jffs2_iget()'s error handling pathJake Daryll Obina
If jffs2_iget() fails for a newly-allocated inode, jffs2_do_clear_inode() can get called twice in the error handling path, the first call in jffs2_iget() itself and the second through iget_failed(). This can result to a use-after-free error in the second jffs2_do_clear_inode() call, such as shown by the oops below wherein the second jffs2_do_clear_inode() call was trying to free node fragments that were already freed in the first jffs2_do_clear_inode() call. [ 78.178860] jffs2: error: (1904) jffs2_do_read_inode_internal: CRC failed for read_inode of inode 24 at physical location 0x1fc00c [ 78.178914] Unable to handle kernel paging request at virtual address 6b6b6b6b6b6b6b7b [ 78.185871] pgd = ffffffc03a567000 [ 78.188794] [6b6b6b6b6b6b6b7b] *pgd=0000000000000000, *pud=0000000000000000 [ 78.194968] Internal error: Oops: 96000004 [#1] PREEMPT SMP ... [ 78.513147] PC is at rb_first_postorder+0xc/0x28 [ 78.516503] LR is at jffs2_kill_fragtree+0x28/0x90 [jffs2] [ 78.520672] pc : [<ffffff8008323d28>] lr : [<ffffff8000eb1cc8>] pstate: 60000105 [ 78.526757] sp : ffffff800cea38f0 [ 78.528753] x29: ffffff800cea38f0 x28: ffffffc01f3f8e80 [ 78.532754] x27: 0000000000000000 x26: ffffff800cea3c70 [ 78.536756] x25: 00000000dc67c8ae x24: ffffffc033d6945d [ 78.540759] x23: ffffffc036811740 x22: ffffff800891a5b8 [ 78.544760] x21: 0000000000000000 x20: 0000000000000000 [ 78.548762] x19: ffffffc037d48910 x18: ffffff800891a588 [ 78.552764] x17: 0000000000000800 x16: 0000000000000c00 [ 78.556766] x15: 0000000000000010 x14: 6f2065646f6e695f [ 78.560767] x13: 6461657220726f66 x12: 2064656c69616620 [ 78.564769] x11: 435243203a6c616e x10: 7265746e695f6564 [ 78.568771] x9 : 6f6e695f64616572 x8 : ffffffc037974038 [ 78.572774] x7 : bbbbbbbbbbbbbbbb x6 : 0000000000000008 [ 78.576775] x5 : 002f91d85bd44a2f x4 : 0000000000000000 [ 78.580777] x3 : 0000000000000000 x2 : 000000403755e000 [ 78.584779] x1 : 6b6b6b6b6b6b6b6b x0 : 6b6b6b6b6b6b6b6b ... [ 79.038551] [<ffffff8008323d28>] rb_first_postorder+0xc/0x28 [ 79.042962] [<ffffff8000eb5578>] jffs2_do_clear_inode+0x88/0x100 [jffs2] [ 79.048395] [<ffffff8000eb9ddc>] jffs2_evict_inode+0x3c/0x48 [jffs2] [ 79.053443] [<ffffff8008201ca8>] evict+0xb0/0x168 [ 79.056835] [<ffffff8008202650>] iput+0x1c0/0x200 [ 79.060228] [<ffffff800820408c>] iget_failed+0x30/0x3c [ 79.064097] [<ffffff8000eba0c0>] jffs2_iget+0x2d8/0x360 [jffs2] [ 79.068740] [<ffffff8000eb0a60>] jffs2_lookup+0xe8/0x130 [jffs2] [ 79.073434] [<ffffff80081f1a28>] lookup_slow+0x118/0x190 [ 79.077435] [<ffffff80081f4708>] walk_component+0xfc/0x28c [ 79.081610] [<ffffff80081f4dd0>] path_lookupat+0x84/0x108 [ 79.085699] [<ffffff80081f5578>] filename_lookup+0x88/0x100 [ 79.089960] [<ffffff80081f572c>] user_path_at_empty+0x58/0x6c [ 79.094396] [<ffffff80081ebe14>] vfs_statx+0xa4/0x114 [ 79.098138] [<ffffff80081ec44c>] SyS_newfstatat+0x58/0x98 [ 79.102227] [<ffffff800808354c>] __sys_trace_return+0x0/0x4 [ 79.106489] Code: d65f03c0 f9400001 b40000e1 aa0103e0 (f9400821) The jffs2_do_clear_inode() call in jffs2_iget() is unnecessary since iget_failed() will eventually call jffs2_do_clear_inode() if needed, so just remove it. Fixes: 5451f79f5f81 ("iget: stop JFFS2 from using iget() and read_inode()") Reviewed-by: Richard Weinberger <richard@nod.at> Signed-off-by: Jake Daryll Obina <jake.obina@gmail.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-01-25dcache: delete unused d_hash_maskAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-01-25dcache: subtract d_hash_shift from 32 in advanceAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-01-25fs/buffer.c: fold init_buffer() into init_page_buffers()Eric Biggers
Since commit e76004093db1 ("fs/buffer.c: remove unnecessary init operation after allocating buffer_head"), there are no callers of init_buffer() outside of init_page_buffers(). So just fold it into init_page_buffers(). Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-01-25fs: fold __inode_permission() into inode_permission()Eric Biggers
Since commit 9c630ebefeee ("ovl: simplify permission checking"), overlayfs doesn't call __inode_permission() anymore, which leaves no users other than inode_permission(). So just fold it back into inode_permission(). Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-01-25f2fs: support inode creation timeChao Yu
This patch adds creation time field in inode layout to support showing kstat.btime in ->statx. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-01-25pnfs/blocklayout: Ensure disk address in block device mapBenjamin Coddington
It's possible that the device map is smaller than the offset into the device for the I/O we're adding. Add a check for it and bail out, otherwise we risk botching the bio calculations that follow. Signed-off-by: Benjamin Coddington <bcodding@redhat.com> Signed-off-by: Trond Myklebust <trondmy@gmail.com>
2018-01-25pnfs/blocklayout: pnfs_block_dev_map uses bytes, not sectorsBenjamin Coddington
Fixup the field types to match their use. Signed-off-by: Benjamin Coddington <bcodding@redhat.com> Signed-off-by: Trond Myklebust <trondmy@gmail.com>
2018-01-25f2fs: rebuild sit page from sit info in memYunlei He
This patch rebuild sit page from sit info in mem instead of issue a read io. I test this method and the result is as below: Pre: mmc_perf_test-12061 [001] ...1 976.819992: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = start flush sit mmc_perf_test-12061 [001] ...1 976.856446: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = end flush sit mmc_perf_test-12061 [003] ...1 998.976946: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = start flush sit mmc_perf_test-12061 [003] ...1 999.023269: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = end flush sit mmc_perf_test-12061 [003] ...1 1022.060772: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = start flush sit mmc_perf_test-12061 [003] ...1 1022.111034: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = end flush sit mmc_perf_test-12061 [002] ...1 1070.127643: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = start flush sit mmc_perf_test-12061 [003] ...1 1070.187352: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = end flush sit mmc_perf_test-12061 [003] ...1 1095.942124: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = start flush sit mmc_perf_test-12061 [003] ...1 1095.995975: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = end flush sit mmc_perf_test-12061 [003] ...1 1122.535091: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = start flush sit mmc_perf_test-12061 [003] ...1 1122.586521: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = end flush sit mmc_perf_test-12061 [001] ...1 1147.897487: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = start flush sit mmc_perf_test-12061 [001] ...1 1147.959438: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = end flush sit mmc_perf_test-12061 [003] ...1 1177.926951: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = start flush sit mmc_perf_test-12061 [002] ...1 1177.976823: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = end flush sit mmc_perf_test-12061 [002] ...1 1204.176087: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = start flush sit mmc_perf_test-12061 [002] ...1 1204.239046: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = end flush sit Some sit flush consume more than 50ms. Now: mmc_perf_test-2187 [007] ...1 196.840684: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = start flush sit mmc_perf_test-2187 [007] ...1 196.841258: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = end flush sit mmc_perf_test-2187 [007] ...1 219.430582: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = start flush sit mmc_perf_test-2187 [007] ...1 219.431144: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = end flush sit mmc_perf_test-2187 [002] ...1 243.638678: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = start flush sit mmc_perf_test-2187 [000] ...1 243.638980: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = end flush sit mmc_perf_test-2187 [002] ...1 265.392180: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = start flush sit mmc_perf_test-2187 [002] ...1 265.392245: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = end flush sit mmc_perf_test-2187 [000] ...1 290.309051: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = start flush sit mmc_perf_test-2187 [000] ...1 290.309116: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = end flush sit mmc_perf_test-2187 [003] ...1 317.144209: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = start flush sit mmc_perf_test-2187 [003] ...1 317.145913: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = end flush sit mmc_perf_test-2187 [005] ...1 343.224954: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = start flush sit mmc_perf_test-2187 [005] ...1 343.225574: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = end flush sit mmc_perf_test-2187 [000] ...1 370.239846: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = start flush sit mmc_perf_test-2187 [000] ...1 370.241138: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = end flush sit mmc_perf_test-2187 [001] ...1 397.029043: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = start flush sit mmc_perf_test-2187 [001] ...1 397.030750: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = end flush sit mmc_perf_test-2187 [003] ...1 425.386377: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = start flush sit mmc_perf_test-2187 [003] ...1 425.387735: f2fs_write_checkpoint: dev = (259,44), checkpoint for Sync, state = end flush sit Most sit flush consume no more than 1ms. Signed-off-by: Yunlei He <heyunlei@huawei.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-01-25f2fs: stop issuing discard if fs is readonlyChao Yu
If filesystem is readonly, stop to issue discard in daemon. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-01-25f2fs: clean up duplicated assignment in init_discard_policyChao Yu
Remove duplicated codes of assignment for .max_requests and .io_aware_gran. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-01-25f2fs: use GFP_F2FS_ZERO for cleanupChao Yu
Clean up codes with GFP_F2FS_ZERO, no logic changes. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-01-25GFS2: Fix minor comment typoBob Peterson
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2018-01-25Merge tag 'for-4.15-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fix from David Sterba: "It's been reported recently that readdir can list stale entries under some conditions. Fix it." * tag 'for-4.15-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: Btrfs: fix stale entries in readdir
2018-01-24cifs: remove redundant duplicated assignment of pointer 'node'Colin Ian King
Node is assigned twice to rb_first(root), first during declaration time and second after a taking a spin lock, so we have a duplicated assignment. Remove the first assignment because it is redundant and also not protected by the spin lock. Cleans up clang warning: fs/cifs/connect.c:4435:18: warning: Value stored to 'node' during its initialization is never read Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Steve French <smfrench@gmail.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
2018-01-24CIFS: SMBD: work around gcc -Wmaybe-uninitialized warningArnd Bergmann
GCC versions from 4.9 to 6.3 produce a false-positive warning when dealing with a conditional spin_lock_irqsave(): fs/cifs/smbdirect.c: In function 'smbd_recv_buf': include/linux/spinlock.h:260:3: warning: 'flags' may be used uninitialized in this function [-Wmaybe-uninitialized] This function calls some sleeping interfaces, so it is clear that it does not get called with interrupts disabled and there is no need to save the irq state before taking the spinlock. This lets us remove the variable, which makes the function slightly more efficient and avoids the warning. A further cleanup could do the same change for other functions in this file, but I did not want to take this too far for now. Fixes: ac69f66e54ca ("CIFS: SMBD: Implement function to receive data via RDMA receive") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Steve French <smfrench@gmail.com>
2018-01-24cifs: Fix autonegotiate security settings mismatchDaniel N Pettersson
Autonegotiation gives a security settings mismatch error if the SMB server selects an SMBv3 dialect that isn't SMB3.02. The exact error is "protocol revalidation - security settings mismatch". This can be tested using Samba v4.2 or by setting the global Samba setting max protocol = SMB3_00. The check that fails in smb3_validate_negotiate is the dialect verification of the negotiate info response. This is because it tries to verify against the protocol_id in the global smbdefault_values. The protocol_id in smbdefault_values is SMB3.02. In SMB2_negotiate the protocol_id in smbdefault_values isn't updated, it is global so it probably shouldn't be, but server->dialect is. This patch changes the check in smb3_validate_negotiate to use server->dialect instead of server->vals->protocol_id. The patch works with autonegotiate and when using a specific version in the vers mount option. Signed-off-by: Daniel N Pettersson <danielnp@axis.com> Signed-off-by: Steve French <smfrench@gmail.com> CC: Stable <stable@vger.kernel.org>
2018-01-24CIFS: SMBD: _smbd_get_connection() can be statickbuild test robot
Fixes: 07495ff5d9bc ("CIFS: SMBD: Establish SMB Direct connection") Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Steve French <smfrench@gmail.com> Acked-by: Long Li <longli@microsoft.com>
2018-01-24CIFS: SMBD: Disable signing on SMB direct transportLong Li
Currently the CIFS SMB Direct implementation (experimental) doesn't properly support signing. Disable it when SMB Direct is in use for transport. Signing will be enabled in future after it is implemented. Signed-off-by: Long Li <longli@microsoft.com> Signed-off-by: Steve French <smfrench@gmail.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
2018-01-24CIFS: SMBD: Add SMB Direct debug countersLong Li
For debugging and troubleshooting, export SMBDirect debug counters to /proc/fs/cifs/DebugData. Signed-off-by: Long Li <longli@microsoft.com> Signed-off-by: Steve French <smfrench@gmail.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
2018-01-24CIFS: SMBD: Upper layer performs SMB read via RDMA write through memory ↵Long Li
registration If I/O size is larger than rdma_readwrite_threshold, use RDMA write for SMB read by specifying channel SMB2_CHANNEL_RDMA_V1 or SMB2_CHANNEL_RDMA_V1_INVALIDATE in the SMB packet, depending on SMB dialect used. Append a smbd_buffer_descriptor_v1 to the end of the SMB packet and fill in other values to indicate this SMB read uses RDMA write. There is no need to read from the transport for incoming payload. At the time SMB read response comes back, the data is already transferred and placed in the pages by RDMA hardware. When SMB read is finished, deregister the memory regions if RDMA write is used for this SMB read. smbd_deregister_mr may need to do local invalidation and sleep, if server remote invalidation is not used. There are situations where the MID may not be created on I/O failure, under which memory region is deregistered when read data context is released. Signed-off-by: Long Li <longli@microsoft.com> Signed-off-by: Steve French <smfrench@gmail.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
2018-01-24CIFS: SMBD: Read correct returned data length for RDMA write (SMB read) I/OLong Li
This patch is for preparing upper layer doing SMB read via RDMA write. When RDMA write is used for SMB read, the returned data length is in DataRemaining in the response packet. Reading it properly by adding a parameter to specifiy where the returned data length is. Add the defition for memory registration to wdata and return the correct length based on if RDMA write is used. Signed-off-by: Long Li <longli@microsoft.com> Signed-off-by: Steve French <smfrench@gmail.com> Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-04-11 18:26:27 +0000