summaryrefslogtreecommitdiff
path: root/include/asm-arm/arch-omap
AgeCommit message (Collapse)Author
2006-09-25ARM: OMAP: Sync clocks with linux-omap treeTony Lindgren
Mostly clean up CONFIG_OMAP_RESET_CLOCKS. Also includes a patch from Imre Deak to make McSPI clocks use id. Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25ARM: OMAP: Sync DMA with linux-omap treeTony Lindgren
This patch syncs OMAP DMA code with linux-omap tree. Mostly allow changing DMA callback function and set OMAP2 specific transfer mode. Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25ARM: OMAP: Add enable/disable functions for dmtimerTimo Teras
Add enable/disable functions which effectively control the GPT iclk and fclk. Signed-off-by: Timo Teras <timo.teras@solidboot.com> Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25ARM: OMAP: DMA source and destination addresses are unsignedTony Lindgren
Also export some omap24xx specific DMA functions. Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25ARM: OMAP2: Dynamic allocator for GPMC memory spaceImre Deak
Add support for assigning memory regions dynamically to peripherals attached to GPMC interface. Platform specific code should now call gpmc_cs_request to get a free GPMC memory region instead of using a fixed address. Make the H4 and Apollon platform initialization use the new API. Signed-off-by: Imre Deak <imre.deak@solidboot.com> Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25ARM: OMAP: Add some extra #defines for Amstrad DeltaJonathan McDowell
This patch adds some further #defines regarding GPIOs and latch bits for the Amstrad Delta; the drivers that use them will be submitted at a later date but there's no reason not to have the information already there and available for use. Signed-off-by: Jonathan McDowell <noodles@earth.li> Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25ARM: OMAP: mux: add config for 16xx SPI pinsMark Howell
This patch adds pin mux info for the SPI master/slave interface on OMAP16xx. Data from OMAP 1611/1612 TRM and errata. Works for me on my 1611/H2 with current git kernel. Signed-off-by: Mark Howell <mhowell@northlink.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25ARM: OMAP: Apollon MMC supportKyungmin Park
Apollon board MMC supports on OMAP2 TODO: We have to check MMC on H4 Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-09-25ARM: OMAP: Added OMAP24xx camera IRQ definitionSamuel Ortiz
Signed-off-by: Samuel Ortiz <samuel.ortiz@solidboot.com> Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-08-02[ARM] 3743/1: ARM: OMAP: Fix compile for OMAPTony Lindgren
Patch from Tony Lindgren "clocks" is only needed only for CONFIG_OMAP_RESET_CLOCKS, which turns of all unused clocks in with late_initcall. This is to kill clocks that may have been left on by the bootloader. Having static and non-static declaration of clocks makes omap_h2_1610_defconfig build fail. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-26ARM: OMAP: Multiplexing for 24xx GPMC wait pin monitoringTony Lindgren
Multiplexing for 24xx GPMC wait pin monitoring Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-06-26ARM: OMAP: Update dmtimersTimo Teras
- Initialize timer outside of spinlock to reduce the time the spinlock is held - Do clk_get to the source clocks during initialization to avoid sleeping later - New function to set counter register Signed-off-by: Timo Teras <timo.teras@solidboot.com> Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-06-26ARM: OMAP: Mux updates for external DMA and GPIOTony Lindgren
Mux updates for external DMA and GPIO. GPIO updates by Igor Stoppa. Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-06-26ARM: OMAP: Add OMAP_TAG_CAMERA_SENSORSamuel Ortiz
Add platform config data for camera sensors. Since it includes pointers, it should not be passed from the bootloader. Signed-off-by: Samuel Ortiz <samuel.ortiz@solidboot.com> Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-06-26ARM: OMAP: Add initial 24xx suspend supportTony Lindgren
This patch adds support for omap24xx power domains and allows suspend to work. Please note that for some reason core power domain still does not seem to idle. Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-06-26ARM: OMAP: Add GPMC support for OMAP2Juha Yrjola
Implement basic support for General-Purpose Memory Controller as found on OMAP2420. Dynamic CS address space allocation still needs to be done. Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-06-26ARM: OMAP: Fix DMA channel irq handling for omap24xxTony Lindgren
- DMA CSR register is cleared by reading on omap1, but on omap2 it is cleard by writing to it. - DMA TOUT interrupt does not exist on omap24xx, rename it - Add SECURE and MISALIGNED errors by default for omap24xx - Add defines for external DMA request lines Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-06-26ARM: OMAP: OMAP2 DMA burst supportKyungmin Park
OMAP2 DMA burst setting support Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-06-26ARM: OMAP: Port dmtimers to OMAP2 and implement PWM supportTimo Teras
Port dmtimer framework to OMAP2. Modify the dmtimers API to support setting of PWM configuration and prescaler. Convert 32 kHz timer and GP timer to use the dmtimer framework. Signed-off-by: Timo Teras <timo.teras@solidboot.com> Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-06-26ARM: OMAP: Add core fsample supportBrian Swetland
This patch adds core support for the TI F-Sample Board (OMAP 850). Signed-off-by: Brian Swetland <swetland@google.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-06-24[ARM] 3631/1: Remove legacy __mem_isa() definitionsAndrew Victor
Patch from Andrew Victor Remove the remaining legacy __mem_isa() definitions for the ARM platforms. Signed-off-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-26Don't include linux/config.h from anywhere else in include/David Woodhouse
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-04-02[ARM] 3433/1: ARM: OMAP: 8/8 Update board filesTony Lindgren
Patch from Tony Lindgren This patch syncs OMAP board support with linux-omap tree. The highlights of the patch are: - Add support for Nokia 770 by Juha Yrjola - Add support for Samsung Apollon by Kyungmin Park - Add support for Amstrad E3 videophone by Jonathan McDowell - Remove board-netstar.c board support as requested by Ladislav Michl - Do platform_device registration in board files by Komal Shah et al. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-02[ARM] 3455/1: ARM: OMAP: 7/8 Misc updates, take 2Tony Lindgren
Patch from Tony Lindgren Update misc OMAP core code from linux-omap tree: - McBSP updates by Samuel Ortiz, Andrzej Zaborowski - Whitespace cleanups by Ladislav Michl - Other fixes by various linux-omap developers Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-02[ARM] 3454/1: ARM: OMAP: 6/8 Update framebuffer low-level init code, take 2Tony Lindgren
Patch from Tony Lindgren Update OMAP framebuffer low-level init code from linux-omap tree by Imre Deak. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-02[ARM] 3430/1: ARM: OMAP: 5/8 Update PMTony Lindgren
Patch from Tony Lindgren Update OMAP PM code from linux-omap tree: - Move PM code from plat-omap to mach-omap1 and mach-omap2 by Tony Lindgren - Add minimal PM support for omap24xx by Tony Lindgren and Richard Woodruff - Misc updates to omap1 PM code by Tuukka Tikkanen et al - Updates to the SRAM code needed for PM and FB by Imre Deak Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-02[ARM] 3428/1: ARM: OMAP: 3/8 Update pin multiplexingTony Lindgren
Patch from Tony Lindgren Update OMAP pin multiplexing code from linux-omap tree. This patch adds new pin configurations by various OMAP developers, and suport for omap730 by Brian Swetland. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-02[ARM] 3427/1: ARM: OMAP: 2/8 Update timersTony Lindgren
Patch from Tony Lindgren Update OMAP timers from linux-omap tree. The highlights of the patch are: - Move timer32k code from mach-omap1 to plat-omap and make it work also on omap24xx by Tony Lindgren - Add support for dmtimer idle check for PM by Tuukka Tikkanen Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-02[ARM] 3426/1: ARM: OMAP: 1/8 Update clock frameworkTony Lindgren
Patch from Tony Lindgren Update OMAP clock framework from linux-omap tree. The highlights of the patch are: - Add support for omap730 clocks by Andrzej Zaborowski - Fix compile warnings by Dirk Behme - Add support for using dev id by Tony Lindgren and Komal Shah - Move memory timings and PRCM into separate files by Tony Lindgren Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-28[ARM] Fix decompressor serial IO to give CRLF not LFCRRussell King
As per the corresponding change to the serial drivers, arrange for ARM decompressors to give CRLF. Move the common putstr code into misc.c such that machines only need to supply "putc" and "flush" functions. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-03-21[ARM] Move HZ definition into KconfigRussell King
Move the HZ definition into Kconfig, and set appropriate defaults for platforms. Remove mostly empty asm/arch/param.h include file. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-08[ARM] 3279/1: OMAP: 1/3 Fix low-level io initTony Lindgren
Patch from Tony Lindgren This patch adds the missing cache flushes to common low-level init that are needed to access the IO region. These flushes are normally done at the end of devicemaps_init(), but we need to detect the OMAP core type early. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-17ARM: OMAP: 1/4 Fix clock framework to use clk_enable/disableTony Lindgren
This patch fixes OMAP clock framework to use clk_enable/disable instead of clk_use/unuse as specified in include/linux/clk.h. Instances of clk_use/unuse are renamed to clk_enable/disable, and references clk_use/unuse are removed. Signed-off-by: Tony Lindgren <tony@atomide.com>
2006-01-07[ARM] Move asm/hardware/clock.h to linux/clk.hRussell King
This is needs to be visible to other architectures using the AMBA bus and peripherals. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-04[ARM] Remove definition of MAX_DMA_CHANNELS to zeroRussell King
Since we now only build arch/arm/kernel/dma.c on machine types which set ISA_DMA_API, we don't need to define MAX_DMA_CHANNELS to 0 to indicate this - this definition becomes superfluous. Remove it. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-04[ARM] Move common definition of MAX_DMA_ADDRESS to asm/dma.hRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-03[ARM] Cleanup ARM includesRussell King
arch/arm/kernel/entry-armv.S has contained a comment suggesting that asm/hardware.h and asm/arch/irqs.h should be moved into the asm/arch/entry-macro.S include. So move the includes to these two files as required. Add missing includes (asm/hardware.h, asm/io.h) to asm/arch/system.h includes which use those facilities, and remove asm/io.h from kernel/process.c. Remove other unnecessary includes from arch/arm/kernel, arch/arm/mm and arch/arm/mach-footbridge. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-16[ARM] Include asm/hardware.h instead of asm/arch/hardware.hRussell King
Rationalise hardware.h include. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-10[ARM] 3144/1: OMAP 5/5: Update omap H2 defconfigTony Lindgren
Patch from Tony Lindgren This patch updates omap H2 defconfig. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-10[ARM] 3143/1: OMAP 4/5: Update omap include filesTony Lindgren
Patch from Tony Lindgren This patch syncs the mainline kernel with linux-omap tree. This patch contains changes to common header files for omap1xxx and omap24xx by various omap developers, and improved cpu detection by Imre Deak Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-29[ARM] 3060/1: allow constants found in asm/memory.h to be used in asm codeNicolas Pitre
Patch from Nicolas Pitre This patch allows for assorted type of cleanups by letting assembly code use the same set of defines for constant values and avoid duplicated definitions that might not always be in sync, or that might simply be confusing due to the different names for the same thing. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-28[ARM] 1/4: Move include of asm/hardware.h to asm-arm/arch-*/io.hRussell King
Including asm/hardware.h into asm/io.h can cause #define clashes between platform specific definitions and driver local definitions. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-15[ARM] Remove PFN_TO_NID for !DISCONTIGMEMRussell King
Platform classes need not define PFN_TO_NID when DISCONTIGMEM is not selected. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-07[ARM] 2888/1: OMAP 3/4: Update omap include files, take 2Tony Lindgren
Patch from Tony Lindgren This patch syncs the mainline kernel with linux-omap tree. The highlights of the patch are: - Start adding 24xx support by Paul Mundt - Clean-up of cpu detection by Dirk Behme and Tony Lindgren - Add DSP header by Toshihiro Kobayashi - Add support for mtd-xip by Vladimir Barinov - Add various new mux registers - Move OMAP specific serial defines back to serial.h Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-07-10[PATCH] ARM: 2804/1: OMAP update 9/11: Update OMAP arch filesTony Lindgren
Patch from Tony Lindgren This patch by various OMAP developers syncs the OMAP specific arch files with the linux-omap tree. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-07-10[PATCH] ARM: 2802/1: OMAP update 8/11: Update OMAP arch filesTony Lindgren
Patch from Tony Lindgren This patch by various OMAP developers syncs the OMAP specific arch files with the linux-omap tree. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-07-10[PATCH] ARM: 2797/1: OMAP update 1/11: Update include filesTony Lindgren
Patch from Tony Lindgren This patch by various OMAP developers syncs the OMAP specific include files with the linux-omap tree. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-06-27[PATCH] USB: more omap_udc updates (dma and omap1710)David Brownell
More omap_udc updates: * OMAP 1710 updates - new UDC bit for clearing endpoint toggle, affecting CLEAR_HALT - new OTG bits affecting wakeup * Fix the bug Vladimir noted, that IN-DMA transfer code path kicks in for under 1024 bytes (not "up to 1024 bytes") * Handle transceiver setup more intelligently - use transceiver whenever one's available; this can be handy for GPIO based, loopback, or transceiverless configs - cleanup correctly after the "unrecognized HMC" case * DMA performance tweaks - allow burst/pack for memory access - use 16 bit DMA access most of the time on TIPB * Add workarounds for some DMA errata (not observed "in the wild"): - DMA CSAC/CDAC reads returning zero - RX/TX DMA config registers bit 12 always reads as zero (TI patch) * More "sparse" warnings removed, notably "changing" the SETUP packet to return data in USB byteorder (an API change, null effect on OMAP except for these warnings). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-21[PATCH] I2C: add i2c driver for TPS6501xDavid Brownell
This adds an I2C driver for the TPS6501x series of power management chips. It's used on many OMAP based boards, and this driver has been widely used in the Linux-OMAP trees over the last year or so. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-03[PATCH] ARM: cleanup vmalloc start/offset macrosRussell King
VMALLOC_START and VMALLOC_OFFSET are common between all ARM machine classes. Move them into include/asm-arm/pgtable.h, but allow a machine class to override them if required. Signed-off-by: Russell King <rmk@arm.linux.org.uk>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-04 17:51:38 +0000