summaryrefslogtreecommitdiff
path: root/include/video
AgeCommit message (Collapse)Author
2015-04-20Merge tag 'fbdev-4.1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux Pull fbdev updates from Tomi Valkeinen: "Small fixes and improvements to various fbdev drivers" * tag 'fbdev-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (24 commits) omapdss: extend pm notifier to handle hibernation OMAPDSS: Correct video ports description file path in DT binding doc OMAPDSS: disable VT switch fbdev: sh_mobile_lcdc: Fix destruction of uninitialized mutex video: fbdev: sh_mobile_lcdcfb: Fix ROP3 sysfs attribute parsing fbdev: pm3fb: cleanup some confusing indenting hyperv: hyperv_fb: match wait_for_completion_timeout return type video: fbdev: use msecs_to_jiffies for time conversions fbdev: via/via_clock: fix sparse warning video: fbdev: make of_device_id array const fbdev: sm501fb: use memset_io OMAPDSS: workaround for MFLAG + NV12 issue OMAPDSS: Add support for MFLAG OMAPDSS: setup default fifo thresholds OMAPDSS: DISPC: lock access to DISPC_CONTROL & DISPC_CONFIG OMAPDSS: DISPC: fix div by zero issue in overlay scaling OMAPDSS: DISPC: change sync_pclk_edge default value OMAPDSS: change signal_level & signal_edge enum values OMAPDSS: DISPC: explicit handling for sync and de levels OMAPDSS: DISPC: remove OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES ...
2015-04-13Merge tag 'imx-drm-next-2015-03-31' of ↵Dave Airlie
git://git.pengutronix.de/git/pza/linux into drm-next imx-drm changes to use media bus formats and LDB drm_panel support - Add media bus formats needed by imx-drm - Switch to use media bus formats to describe the pixel format on the internal parallel bus between display interface and encoders - Some preparations for TV Output via TVEv2 on i.MX5 - Add drm_panel support to the i.MX LVDS driver, allow to determine the bus pixel format from the panel descriptor. * tag 'imx-drm-next-2015-03-31' of git://git.pengutronix.de/git/pza/linux: drm/imx: imx-ldb: allow to determine bus format from the connected panel drm/imx: imx-ldb: reset display clock input when disabling LVDS drm/imx: imx-ldb: add drm_panel support drm/imx: consolidate bus format variable names drm/imx: switch to use media bus formats Add RGB666_1X24_CPADHI media bus format Add YUV8_1X24 media bus format Add BGR888_1X24 and GBR888_1X24 media bus formats Add LVDS RGB media bus formats Add RGB444_1X12 and RGB565_1X16 media bus formats drm/imx: ipuv3-crtc: Allow to divide DI clock from TVEv2 drm/imx: Add support for interlaced scanout
2015-04-13drm/exynos: Enable DP clock to fix display on Exynos5250 and otherKrzysztof Kozlowski
After adding display power domain for Exynos5250 in commit 2d2c9a8d0a4f ("ARM: dts: add display power domain for exynos5250") the display on Chromebook Snow and others stopped working after boot. The reason for this suggested Andrzej Hajda: the DP clock was disabled. This clock is required by Display Port and is enabled by bootloader. However when FIMD driver probing was deferred, the display power domain was turned off. This effectively reset the value of DP clock enable register. When exynos-dp is later probed, the clock is not enabled and display is not properly configured: exynos-dp 145b0000.dp-controller: Timeout of video streamclk ok exynos-dp 145b0000.dp-controller: unable to config video Fixes: 2d2c9a8d0a4f ("ARM: dts: add display power domain for exynos5250") Cc: <stable@vger.kernel.org> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reported-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-04-13drm/exynos: fimd: fix alpha setting for XR24 pixel formatGustavo Padovan
XR24 planes were not shown properly, so now set the right registers to correctly enable displaying these planes. It also moves the alpha register settings to fimd_win_set_pixfmt() to keep all pixel format stuff together. v2: remove leftover var alpha Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-03-31drm/imx: consolidate bus format variable namesPhilipp Zabel
This patch consolidates the different interface_pix_fmt, pixel_fmt, pix_fmt, and pixfmt variables to a common name "bus_format" wherever they describe the pixel format on the bus between display controller and encoder hardware. At the same time, it renames imx_drm_panel_format to imx_drm_set_bus_format. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Tested-by: Emil Renner Berthing <kernel@esmil.dk>
2015-02-26OMAPDSS: change signal_level & signal_edge enum valuesTomi Valkeinen
At the moment the enum values for ACTIVE_HIGH and RISING_EDGE are 0, and ACTIVE_LOW and FALLING_EDGE are 1, to match the values programmed to HW. The previous patch removed this dependency. Swap the enum values the other way around. This doesn't change the behavior in any way, but makes it easier to debug as value of '1' means HIGH or RISING. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-02-26OMAPDSS: DISPC: remove OMAPDSS_DRIVE_SIG_OPPOSITE_EDGESTomi Valkeinen
DISPC can drive data lines either on rising or falling pixel clock edge, which can be configured by the user. Sync lines can also be driven on rising or falling pixel clock edge, but additionally the HW can be configured to drive the sync lines on opposite clock edge from the data lines. This opposite edge setting does not make any sense, as the same effect can be achieved by just setting the sync lines to be driven on the other edge compared to the data lines. It feels like some kind of backward compatibility option, even if all DSS versions seem to have the same implementation. To simplify the code and configuration of the signals, and to make the dispc timings more compatible with what is used on other platforms, let's just remove the whole opposite-edge support. The drivers that used OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES setting are changed so that they use the opposite setting from the data edge. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-02-26OMAPDSS: fix regression with display sysfs filesTomi Valkeinen
omapdss's sysfs directories for displays used to have 'name' file, giving the name for the display. This file was later renamed to 'display_name' to avoid conflicts with i2c sysfs 'name' file. Looks like at least xserver-xorg-video-omap3 requires the 'name' file to be present. To fix the regression, this patch creates new kobjects for each display, allowing us to create sysfs directories for the displays. This way we have the whole directory for omapdss, and there will be no sysfs file clashes with the underlying display device's sysfs files. We can thus add the 'name' sysfs file back. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Tested-by: NeilBrown <neilb@suse.de>
2015-02-16Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm updates from Dave Airlie: "This is the main drm pull, it has a shared branch with some alsa crossover but everything should be acked by relevant people. New drivers: - ATMEL HLCDC driver - designware HDMI core support (used in multiple SoCs). core: - lots more atomic modesetting work, properties and atomic ioctl (hidden under option) - bridge rework allows support for Samsung exynos chromebooks to work finally. - some more panels supported i915: - atomic plane update support - DSI uses shared DSI infrastructure - Skylake basic support is all merged now - component framework used for i915/snd-hda interactions - write-combine cpu memory mappings - engine init code refactored - full ppgtt enabled where execlists are enabled. - cherryview rps/gpu turbo and pipe CRC support. radeon: - indirect draw support for evergreen/cayman - SMC and manual fan control for SI/CI - Displayport audio support amdkfd: - SDMA usermode queue support - replace suballocator usage with more suitable one - rework for allowing interfacing to more than radeon nouveau: - major renaming in prep for later splitting work - merge arm platform driver into nouveau - GK20A reclocking support msm: - conversion to atomic modesetting - YUV support for mdp4/5 - eDP support - hw cursor for mdp5 tegra: - conversion to atomic modesetting - better suspend/resume support for child devices rcar-du: - interlaced support imx: - move to using dw_hdmi shared support - mode_fixup support sti: - DVO support - HDMI infoframe support exynos: - refactoring and cleanup, removed lots of internal unnecessary abstraction - exynos7 DECON display controller support Along with the usual bunch of fixes, cleanups etc" * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (724 commits) drm/radeon: fix voltage setup on hawaii drm/radeon/dp: Set EDP_CONFIGURATION_SET for bridge chips if necessary drm/radeon: only enable kv/kb dpm interrupts once v3 drm/radeon: workaround for CP HW bug on CIK drm/radeon: Don't try to enable write-combining without PAT drm/radeon: use 0-255 rather than 0-100 for pwm fan range drm/i915: Clamp efficient frequency to valid range drm/i915: Really ignore long HPD pulses on eDP drm/exynos: Add DECON driver drm/i915: Correct the base value while updating LP_OUTPUT_HOLD in MIPI_PORT_CTRL drm/i915: Insert a command barrier on BLT/BSD cache flushes drm/i915: Drop vblank wait from intel_dp_link_down drm/exynos: fix NULL pointer reference drm/exynos: remove exynos_plane_dpms drm/exynos: remove mode property of exynos crtc drm/exynos: Remove exynos_plane_dpms() call with no effect drm/i915: Squelch overzealous uncore reset WARN_ON drm/i915: Take runtime pm reference on hangcheck_info drm/i915: Correct the IOSF Dev_FN field for IOSF transfers drm/exynos: fix DMA_ATTR_NO_KERNEL_MAPPING usage ...
2015-02-11drm/exynos: Add DECON driverAjay Kumar
This patch is based on exynos-drm-next branch of Inki Dae's tree at: git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos.git DECON(Display and Enhancement Controller) is the new IP in exynos7 SOC for generating video signals using pixel data. DECON driver can be used to drive 2 different interfaces on Exynos7: DECON-INT(video controller) and DECON-EXT(Mixer for HDMI) The existing FIMD driver code was used as a template to create DECON driver. Only DECON-INT is supported as of now, and DECON-EXT support will be added later. The current version of the driver supports video mode displays. Changelog v2: - Change config name, DRM_EXYNOS_DECON to DRM_EXYNOS7_DECON. Signed-off-by: Akshu Agrawal <akshua@gmail.com> Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2015-02-04OMAPDSS: add define for DRA7xx HW versionTomi Valkeinen
Add define for DRA7xx DSS version. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2015-01-07gpu: ipu-v3: Use videomode in struct ipu_di_signal_cfgSteve Longerbeam
This patch changes struct ipu_di_signal_cfg to use struct videomode to define video timings and flags. Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2015-01-07gpu: ipu-di: Add ipu_di_adjust_videomode()Jiada Wang
On some monitors, high resolution modes are not working, exhibiting pixel column truncation problems (for example, 1280x1024 displays as 1280x1022). The function ipu_di_adjust_videomode() aims to fix these issues by adjusting a passed videomode to IPU restrictions. The function can be called from the drm_crtc_helper_funcs->mode_fixup() methods. Signed-off-by: Jiada Wang <jiada_wang@mentor.com> Signed-off-by: Deepak Das <deepak_das@mentor.com> Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2014-12-01OMAPDSS: Remove all references to obsolete HDMI audio callbacksJyri Sarha
In new model these callbacks are obsolete since the ASoC component drivers are integrated into the HDMI drivers and no callbacks are needed anymore. Signed-off-by: Jyri Sarha <jsarha@ti.com> Reviewed-by: Mark Brown <broonie@kernel.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-11-12OMAPDSS: DT: Get source endpoint by matching reg-idArchit Taneja
In omapdss_of_find_source_for_first_ep, we retrieve a source endpoint's DT node, and then see what omapdss output has the matching device_node pointer in omap_dss_find_output_by_node. For all DPI and SDI outputs, the device_node pointer is set as the parent's DSS device_node pointer. If the source is one of these outputs, the above method won't work. To get the correct output for ports within DSS(and in other cases in the future, where multiple ports might be under one device), we require additional information which is exclusive to the output port. We create a new field in omap_dss_device called 'port_num', this provides port number of the output port corresponding to this device. When searching for the source endpoint in DT, we extract the 'reg' property from the port corresponding to the endpoint source. From the list of registered outputs, we pick out that output which has both dev->of_node and port_num matching with the device_node pointer and 'reg' of the source endpoint node from DT. For encoder blocks(the ones which have both an input and output port), we need to set the port_num as the 'reg' property for the output port as defined in the DT bindings. We set port_num to 1 in the tfp410 and tpd12s015 encoder drivers. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-10-18Merge tag 'fbdev-3.18' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux Pull fbdev updates from Tomi Valkeinen: - new 6x10 font - various small fixes and cleanups * tag 'fbdev-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (30 commits) fonts: Add 6x10 font videomode: provide dummy inline functions for !CONFIG_OF video/atmel_lcdfb: Introduce regulator support fbdev: sh_mobile_hdmi: Re-init regs before irq re-enable on resume framebuffer: fix screen corruption when copying framebuffer: fix border color arm, fbdev, omap2, LLVMLinux: Remove nested function from omapfb arm, fbdev, omap2, LLVMLinux: Remove nested function from omap2 dss video: fbdev: valkyriefb.c: use container_of to resolve fb_info_valkyrie from fb_info video: fbdev: pxafb.c: use container_of to resolve pxafb_info/layer from fb_info video: fbdev: cyber2000fb.c: use container_of to resolve cfb_info from fb_info video: fbdev: controlfb.c: use container_of to resolve fb_info_control from fb_info video: fbdev: sa1100fb.c: use container_of to resolve sa1100fb_info from fb_info video: fbdev: stifb.c: use container_of to resolve stifb_info from fb_info video: fbdev: sis: sis_main.c: Cleaning up missing null-terminate in conjunction with strncpy video: valkyriefb: Fix unused variable warning in set_valkyrie_clock() video: fbdev: use %*ph specifier to dump small buffers video: mx3fb: always enable BACKLIGHT_LCD_SUPPORT video: fbdev: au1200fb: delete double assignment video: fbdev: sis: delete double assignment ...
2014-10-07videomode: provide dummy inline functions for !CONFIG_OFTomi Valkeinen
If CONFIG_OF is disabled but we build any driver that tries to use of_get_display_timing, we get this link error: ERROR: "of_get_display_timing" [drivers/gpu/drm/rcar-du/rcar-du-drm.ko] undefined! This adds an empty inline function as an alternative, to avoid changing each driver using this function when we want to build them without CONFIG_OF. Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-09-02gpu: ipu-v3: Add ipu_dump()Steve Longerbeam
Adds ipu_dump() which dumps IPU register state to debug. Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2014-09-02gpu: ipu-cpmem: Add ipu_cpmem_dump()Steve Longerbeam
Adds ipu_cpmem_dump() which dumps a channel's cpmem to debug. Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2014-09-02gpu: ipu-cpmem: Add second buffer support to ipu_cpmem_set_image()Steve Longerbeam
Add a second buffer physaddr to struct ipu_image, for double-buffering support. Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2014-09-02gpu: ipu-cpmem: Add ipu_cpmem_set_rotation()Steve Longerbeam
Adds ipu_cpmem_set_rotation(). Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2014-09-02gpu: ipu-cpmem: Add ipu_cpmem_set_axi_id()Steve Longerbeam
Adds ipu_cpmem_set_axi_id() to set which AXI bus master the channel will use to transfer data onto AXI bus. Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2014-09-02gpu: ipu-cpmem: Add ipu_cpmem_set_block_mode()Steve Longerbeam
Adds ipu_cpmem_set_block_mode(). Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2014-09-02gpu: ipu-v3: Add ipu_idmac_lock_enable()Steve Longerbeam
Adds ipu_idmac_lock_enable(), which enables or disables channel burst locking. Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2014-09-02gpu: ipu-v3: Add ipu_idmac_enable_watermark()Steve Longerbeam
Adds the function ipu_idmac_enable_watermark(), which enables or disables watermarking in the IDMAC channel. Enabling watermarking can increase a channel's AXI bus arbitration priority. Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2014-09-02gpu: ipu-v3: Add ipu_stride_to_bytes()Steve Longerbeam
Adds ipu_stride_to_bytes(), which converts a pixel stride to bytes, suitable for passing to cpmem. Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2014-09-02gpu: ipu-v3: Add ipu_idmac_clear_buffer()Steve Longerbeam
Add the reverse of ipu_idmac_select_buffer(), that is, clear a buffer ready status in a channel. Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2014-09-02gpu: ipu-v3: Add ipu_idmac_buffer_is_ready()Steve Longerbeam
Add ipu_idmac_buffer_is_ready(), returns true if the given buffer in the given channel is set ready (owned by IPU), or false if not ready (owned by CPU core). Support has been added for third buffer, there is no support yet for triple-buffering in idmac channels, but this function checks buffer-ready for third buffer in case this support is added later. Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2014-09-02gpu: ipu-v3: Move IDMAC channel names to imx-ipu-v3.hSteve Longerbeam
Move the IDMAC channel names to imx-ipu-v3.h, to make the names available outside IPU. Add a couple new channels in the process (async display BG/FG, channels 24 and 29). Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2014-09-02gpu: ipu-v3: Add helper function checking if pixfmt is planarSteve Longerbeam
Add simple helper function returning true if passed pixel format is one of supported planar ones. Signed-off-by: Dmitry Eremin-Solenikov <dmitry_eremin@mentor.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2014-09-02gpu: ipu-v3: Add rotation mode conversion utilitiesSteve Longerbeam
Add two functions: - ipu_degrees_to_rot_mode(): converts a degrees, hflip, and vflip setting to an IPU rotation mode. - ipu_rot_mode_to_degrees(): converts an IPU rotation mode with given hflip and vflip settings to degrees. Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2014-09-02gpu: ipu-v3: Add ipu_mbus_code_to_colorspace()Steve Longerbeam
Add ipu_mbus_code_to_colorspace() to find ipu_color_space from a media bus pixel format code. Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2014-09-02gpu: ipu-v3: smfc: Add ipu_smfc_set_watermark()Steve Longerbeam
Adds ipu_smfc_set_watermark() which programs a channel's SMFC FIFO levels at which the watermark signal is set and cleared. Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2014-09-02gpu: ipu-v3: smfc: Convert to per-channelSteve Longerbeam
Convert the smfc object to be specific to a single smfc channel. Add ipu_smfc_{get|put} to retrieve and release a single smfc channel for exclusive use, and add use counter to ipu_smfc_{enable|disable}. Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2014-09-02gpu: ipu-v3: Add Image Converter unitSteve Longerbeam
Adds the Image Converter (IC) unit. Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> Condensed the three CSC setup functions into a single one that uses static tables to set up the CSC task parameters. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2014-09-02gpu: ipu-v3: Add Camera Sensor Interface unitSteve Longerbeam
Adds the Camera Sensor Interface (CSI) unit required for video capture. Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> Removed the unused clk_get_rate in ipu_csi_init_interface and the ipu_csi_ccir_err_detection_enable/disable functions. Checkpatch cleanup. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2014-08-18gpu: ipu-v3: Add functions to set CSI/IC source muxesSteve Longerbeam
Adds two new functions, ipu_set_csi_src_mux() and ipu_set_ic_src_mux(), that select the inputs to the CSI and IC respectively. Both muxes are programmed in the IPU_CONF register. Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2014-08-18gpu: ipu-v3: Add ipu-cpmem unitSteve Longerbeam
Move channel parameter memory setup functions and macros into a new submodule ipu-cpmem. In the process, cleanup arguments to the functions to take a channel pointer instead of a pointer into cpmem for that channel. That allows the structure of the parameter memory to be private to ipu-cpmem.c. Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2014-08-08Merge tag 'fbdev-3.17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux Pull fbdev updates from Tomi Valkeinen: - much better HDMI infoframe support for OMAP - Cirrus Logic CLPS711X framebuffer driver - DT support for PL11x CLCD driver - various small fixes * tag 'fbdev-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (35 commits) OMAPDSS: DSI: fix depopulating dsi peripherals video: hyperv: hyperv_fb: refresh the VM screen by force on VM panic video: ARM CLCD: Fix DT-related build problems drivers: video: fbdev: atmel_lcdfb.c: Add ability to inverted backlight PWM. video: ARM CLCD: Add DT support drm/omap: Add infoframe & dvi/hdmi mode support OMAPDSS: HDMI: remove the unused code OMAPDSS: HDMI5: add support to set infoframe & HDMI mode OMAPDSS: HDMI4: add support to set infoframe & HDMI mode OMAPDSS: HDMI: add infoframe and hdmi_dvi_mode fields OMAPDSS: add hdmi ops to hdmi-connector and tpd12s015 OMAPDSS: add hdmi ops to hdmi_ops and omap_dss_driver OMAPDSS: HDMI: remove custom avi infoframe OMAPDSS: HDMI5: use common AVI infoframe support OMAPDSS: HDMI4: use common AVI infoframe support OMAPDSS: Kconfig: select HDMI OMAPDSS: HDMI: fix name conflict OMAPDSS: DISPC: clean up dispc_mgr_timings_ok OMAPDSS: DISPC: reject interlace for lcd out OMAPDSS: DISPC: fix debugfs reg dump ...
2014-08-08Merge tag 'cleanup-for-3.17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanups from Olof Johansson: "This merge window brings a good size of cleanups on various platforms. Among the bigger ones: - Removal of Samsung s5pc100 and s5p64xx platforms. Both of these have lacked active support for quite a while, and after asking around nobody showed interest in keeping them around. If needed, they could be resurrected in the future but it's more likely that we would prefer reintroduction of them as DT and multiplatform-enabled platforms instead. - OMAP4 controller code register define diet. They defined a lot of registers that were never actually used, etc. - Move of some of the Tegra platform code (PMC, APBIO, fuse, powergate) to drivers/soc so it can be shared with 64-bit code. This also converts them over to traditional driver models where possible. - Removal of legacy gpio-samsung driver, since the last users have been removed (moved to pinctrl) Plus a bunch of smaller changes for various platforms that sort of dissapear in the diffstat for the above. clps711x cleanups, shmobile header file refactoring/moves for multiplatform friendliness, some misc cleanups, etc" * tag 'cleanup-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (117 commits) drivers: CCI: Correct use of ! and & video: clcd-versatile: Depend on ARM video: fix up versatile CLCD helper move MAINTAINERS: Add sdhci-st file to ARCH/STI architecture ARM: EXYNOS: Fix build breakge with PM_SLEEP=n MAINTAINERS: Remove Kirkwood ARM: tegra: Convert PMC to a driver soc/tegra: fuse: Set up in early initcall ARM: tegra: Always lock the CPU reset vector ARM: tegra: Setup CPU hotplug in a pure initcall soc/tegra: Implement runtime check for Tegra SoCs soc/tegra: fuse: fix dummy functions soc/tegra: fuse: move APB DMA into Tegra20 fuse driver soc/tegra: Add efuse and apbmisc bindings soc/tegra: Add efuse driver for Tegra ARM: tegra: move fuse exports to soc/tegra/fuse.h ARM: tegra: export apb dma readl/writel ARM: tegra: Use a function to get the chip ID ARM: tegra: Sort includes alphabetically ARM: tegra: Move includes to include/soc/tegra ...
2014-08-03drm/exynos: fimd: support LCD I80 interfaceYoungJun Cho
To support MIPI command mode based I80 interface panel, FIMD should do followings: - Sets LCD I80 interface timings configuration. - Uses "lcd_sys" as an IRQ resource and sets relevant IRQ configuration. - Sets LCD block configuration for I80 interface. - Sets ideal(pixel) clock is 2 times faster than the original one to generate frame done IRQ prior to the next TE signal. - Implements trigger feature that transfers image data if there is page flip request, and implements TE handler to call trigger function. Signed-off-by: YoungJun Cho <yj44.cho@samsung.com> Acked-by: Inki Dae <inki.dae@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-07-13video: fbdev: s3c-fb: remove s5pc100 related fimd and fb codesKukjin Kim
This patch removes fimd and fb codes for s5pc100 SoC. Acked-by: Jingoo Han <jg1.han@samsung.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-07-04OMAPDSS: add hdmi ops to hdmi_ops and omap_dss_driverTomi Valkeinen
Add two new ops for HDMI: set_infoframe() and set_hdmi_mode(). The first one can be used to specify the infoframe that should be sent to the HDMI monitor, and the second one is used to enable HDMI mode (versus DVI mode). Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-06-12Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm updates from Dave Airlie: "This is the main drm merge window pull request, changes all over the place, mostly normal levels of churn. Highlights: Core drm: More cleanups, fix race on connector/encoder naming, docs updates, object locking rework in prep for atomic modeset i915: mipi DSI support, valleyview power fixes, cursor size fixes, execlist refactoring, vblank improvements, userptr support, OOM handling improvements radeon: GPUVM tuning and large page size support, gart fixes, deep color HDMI support, HDMI audio cleanups nouveau: - displayport rework should fix lots of issues - initial gk20a support - gk110b support - gk208 fixes exynos: probe order fixes, HDMI changes, IPP consolidation msm: debugfs updates, misc fixes ast: ast2400 support, sync with UMS driver tegra: cleanups, hdmi + hw cursor for Tegra 124. panel: fixes existing panels add some new ones. ipuv3: moved from staging to drivers/gpu" * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (761 commits) drm/nouveau/disp/dp: fix tmds passthrough on dp connector drm/nouveau/dp: probe dpcd to determine connectedness drm/nv50-: trigger update after all connectors disabled drm/nv50-: prepare for attaching a SOR to multiple heads drm/gf119-/disp: fix debug output on update failure drm/nouveau/disp/dp: make use of postcursor when its available drm/g94-/disp/dp: take max pullup value across all lanes drm/nouveau/bios/dp: parse lane postcursor data drm/nouveau/dp: fix support for dpms drm/nouveau: register a drm_dp_aux channel for each dp connector drm/g94-/disp: add method to power-off dp lanes drm/nouveau/disp/dp: maintain link in response to hpd signal drm/g94-/disp: bash and wait for something after changing lane power regs drm/nouveau/disp/dp: split link config/power into two steps drm/nv50/disp: train PIOR-attached DP from second supervisor drm/nouveau/disp/dp: make use of existing output data for link training drm/gf119/disp: start removing direct vbios parsing from supervisor drm/nv50/disp: start removing direct vbios parsing from supervisor drm/nouveau/disp/dp: maintain receiver caps in response to hpd signal drm/nouveau/disp/dp: create subclass for dp outputs ...
2014-06-04gpu: ipu-v3: Register the CSI modulesPhilipp Zabel
This patch registers the two CSI platform devices per IPU. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2014-06-04gpu: ipu-v3: Add CSI and SMFC module enable wrappersPhilipp Zabel
IPU_CONF_..._EN bits are implementation details, not to be made public. Add wrappers around ipu_module_enable/disable, so the CSI V4L2 driver can enable/disable the CSI and SMFC modules. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2014-06-04gpu: ipu-v3: Add ipu_idmac_get_current_buffer functionPhilipp Zabel
This function returns the currently active buffer (0 or 1) of a double buffered IDMAC channel. It is to be used by the CSI driver. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2014-06-04gpu: ipu-v3: Add SMFC codePhilipp Zabel
The Sensor Multi Fifo Controller (SMFC) is used as a buffer between the two CSIs (writing simultaneously) and up to four IDMAC channels. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2014-06-04gpu: ipu-v3: Move i.MX IPUv3 core driver out of stagingPhilipp Zabel
The i.MX Image Processing Unit (IPU) contains a number of image processing blocks that sit right in the middle between DRM and V4L2. Some of the modules, such as Display Controller, Processor, and Interface (DC, DP, DI) or CMOS Sensor Interface (CSI) and their FIFOs could be assigned to either framework, but others, such as the dma controller (IDMAC) and image converter (IC) can be used by both. The IPUv3 core driver provides an internal API to access the modules, to be used by both DRM and V4L2 IPUv3 drivers. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-09OMAPDSS: Add DSS features for AM43xxSathya Prakash M R
Add DSS features for AM43xx. Signed-off-by: Sathya Prakash M R <sathyap@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>