summaryrefslogtreecommitdiff
path: root/kernel/bpf
AgeCommit message (Collapse)Author
2020-11-06bpf: Update verification logic for LSM programsKP Singh
The current logic checks if the name of the BTF type passed in attach_btf_id starts with "bpf_lsm_", this is not sufficient as it also allows attachment to non-LSM hooks like the very function that performs this check, i.e. bpf_lsm_verify_prog. In order to ensure that this verification logic allows attachment to only LSM hooks, the LSM_HOOK definitions in lsm_hook_defs.h are used to generate a BTF_ID set. Upon verification, the attach_btf_id of the program being attached is checked for presence in this set. Fixes: 9e4e01dfd325 ("bpf: lsm: Implement attach, detach and execution") Signed-off-by: KP Singh <kpsingh@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20201105230651.2621917-1-kpsingh@chromium.org
2020-11-05bpf: Zero-fill re-used per-cpu map elementDavid Verbeiren
Zero-fill element values for all other cpus than current, just as when not using prealloc. This is the only way the bpf program can ensure known initial values for all cpus ('onallcpus' cannot be set when coming from the bpf program). The scenario is: bpf program inserts some elements in a per-cpu map, then deletes some (or userspace does). When later adding new elements using bpf_map_update_elem(), the bpf program can only set the value of the new elements for the current cpu. When prealloc is enabled, previously deleted elements are re-used. Without the fix, values for other cpus remain whatever they were when the re-used entry was previously freed. A selftest is added to validate correct operation in above scenario as well as in case of LRU per-cpu map element re-use. Fixes: 6c9059817432 ("bpf: pre-allocate hash map elements") Signed-off-by: David Verbeiren <david.verbeiren@tessares.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20201104112332.15191-1-david.verbeiren@tessares.net
2020-11-05bpf: BPF_PRELOAD depends on BPF_SYSCALLRandy Dunlap
Fix build error when BPF_SYSCALL is not set/enabled but BPF_PRELOAD is by making BPF_PRELOAD depend on BPF_SYSCALL. ERROR: modpost: "bpf_preload_ops" [kernel/bpf/preload/bpf_preload.ko] undefined! Reported-by: kernel test robot <lkp@intel.com> Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20201105195109.26232-1-rdunlap@infradead.org
2020-10-29bpf: Don't rely on GCC __attribute__((optimize)) to disable GCSEArd Biesheuvel
Commit 3193c0836 ("bpf: Disable GCC -fgcse optimization for ___bpf_prog_run()") introduced a __no_fgcse macro that expands to a function scope __attribute__((optimize("-fno-gcse"))), to disable a GCC specific optimization that was causing trouble on x86 builds, and was not expected to have any positive effect in the first place. However, as the GCC manual documents, __attribute__((optimize)) is not for production use, and results in all other optimization options to be forgotten for the function in question. This can cause all kinds of trouble, but in one particular reported case, it causes -fno-asynchronous-unwind-tables to be disregarded, resulting in .eh_frame info to be emitted for the function. This reverts commit 3193c0836, and instead, it disables the -fgcse optimization for the entire source file, but only when building for X86 using GCC with CONFIG_BPF_JIT_ALWAYS_ON disabled. Note that the original commit states that CONFIG_RETPOLINE=n triggers the issue, whereas CONFIG_RETPOLINE=y performs better without the optimization, so it is kept disabled in both cases. Fixes: 3193c0836f20 ("bpf: Disable GCC -fgcse optimization for ___bpf_prog_run()") Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Link: https://lore.kernel.org/lkml/CAMuHMdUg0WJHEcq6to0-eODpXPOywLot6UD2=GFHpzoj_hCoBQ@mail.gmail.com/ Link: https://lore.kernel.org/bpf/20201028171506.15682-2-ardb@kernel.org
2020-10-23Merge tag 'net-5.10-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Cross-tree/merge window issues: - rtl8150: don't incorrectly assign random MAC addresses; fix late in the 5.9 cycle started depending on a return code from a function which changed with the 5.10 PR from the usb subsystem Current release regressions: - Revert "virtio-net: ethtool configurable RXCSUM", it was causing crashes at probe when control vq was not negotiated/available Previous release regressions: - ixgbe: fix probing of multi-port 10 Gigabit Intel NICs with an MDIO bus, only first device would be probed correctly - nexthop: Fix performance regression in nexthop deletion by effectively switching from recently added synchronize_rcu() to synchronize_rcu_expedited() - netsec: ignore 'phy-mode' device property on ACPI systems; the property is not populated correctly by the firmware, but firmware configures the PHY so just keep boot settings Previous releases - always broken: - tcp: fix to update snd_wl1 in bulk receiver fast path, addressing bulk transfers getting "stuck" - icmp: randomize the global rate limiter to prevent attackers from getting useful signal - r8169: fix operation under forced interrupt threading, make the driver always use hard irqs, even on RT, given the handler is light and only wants to schedule napi (and do so through a _irqoff() variant, preferably) - bpf: Enforce pointer id generation for all may-be-null register type to avoid pointers erroneously getting marked as null-checked - tipc: re-configure queue limit for broadcast link - net/sched: act_tunnel_key: fix OOB write in case of IPv6 ERSPAN tunnels - fix various issues in chelsio inline tls driver Misc: - bpf: improve just-added bpf_redirect_neigh() helper api to support supplying nexthop by the caller - in case BPF program has already done a lookup we can avoid doing another one - remove unnecessary break statements - make MCTCP not select IPV6, but rather depend on it" * tag 'net-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (62 commits) tcp: fix to update snd_wl1 in bulk receiver fast path net: Properly typecast int values to set sk_max_pacing_rate netfilter: nf_fwd_netdev: clear timestamp in forwarding path ibmvnic: save changed mac address to adapter->mac_addr selftests: mptcp: depends on built-in IPv6 Revert "virtio-net: ethtool configurable RXCSUM" rtnetlink: fix data overflow in rtnl_calcit() net: ethernet: mtk-star-emac: select REGMAP_MMIO net: hdlc_raw_eth: Clear the IFF_TX_SKB_SHARING flag after calling ether_setup net: hdlc: In hdlc_rcv, check to make sure dev is an HDLC device bpf, libbpf: Guard bpf inline asm from bpf_tail_call_static bpf, selftests: Extend test_tc_redirect to use modified bpf_redirect_neigh() bpf: Fix bpf_redirect_neigh helper api to support supplying nexthop mptcp: depends on IPV6 but not as a module sfc: move initialisation of efx->filter_sem to efx_init_struct() mpls: load mpls_gso after mpls_iptunnel net/sched: act_tunnel_key: fix OOB write in case of IPv6 ERSPAN tunnels net/sched: act_gate: Unlock ->tcfa_lock in tc_setup_flow_action() net: dsa: bcm_sf2: make const array static, makes object smaller mptcp: MPTCP_IPV6 should depend on IPV6 instead of selecting it ...
2020-10-22Merge branch 'work.set_fs' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull initial set_fs() removal from Al Viro: "Christoph's set_fs base series + fixups" * 'work.set_fs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fs: Allow a NULL pos pointer to __kernel_read fs: Allow a NULL pos pointer to __kernel_write powerpc: remove address space overrides using set_fs() powerpc: use non-set_fs based maccess routines x86: remove address space overrides using set_fs() x86: make TASK_SIZE_MAX usable from assembly code x86: move PAGE_OFFSET, TASK_SIZE & friends to page_{32,64}_types.h lkdtm: remove set_fs-based tests test_bitmap: remove user bitmap tests uaccess: add infrastructure for kernel builds with set_fs() fs: don't allow splice read/write without explicit ops fs: don't allow kernel reads and writes without iter ops sysctl: Convert to iter interfaces proc: add a read_iter method to proc proc_ops proc: cleanup the compat vs no compat file ops proc: remove a level of indentation in proc_get_inode
2020-10-19bpf: Enforce id generation for all may-be-null register typeMartin KaFai Lau
The commit af7ec1383361 ("bpf: Add bpf_skc_to_tcp6_sock() helper") introduces RET_PTR_TO_BTF_ID_OR_NULL and the commit eaa6bcb71ef6 ("bpf: Introduce bpf_per_cpu_ptr()") introduces RET_PTR_TO_MEM_OR_BTF_ID_OR_NULL. Note that for RET_PTR_TO_MEM_OR_BTF_ID_OR_NULL, the reg0->type could become PTR_TO_MEM_OR_NULL which is not covered by BPF_PROBE_MEM. The BPF_REG_0 will then hold a _OR_NULL pointer type. This _OR_NULL pointer type requires the bpf program to explicitly do a NULL check first. After NULL check, the verifier will mark all registers having the same reg->id as safe to use. However, the reg->id is not set for those new _OR_NULL return types. One of the ways that may be wrong is, checking NULL for one btf_id typed pointer will end up validating all other btf_id typed pointers because all of them have id == 0. The later tests will exercise this path. To fix it and also avoid similar issue in the future, this patch moves the id generation logic out of each individual RET type test in check_helper_call(). Instead, it does one reg_type_may_be_null() test and then do the id generation if needed. This patch also adds a WARN_ON_ONCE in mark_ptr_or_null_reg() to catch future breakage. The _OR_NULL pointer usage in the bpf_iter_reg.ctx_arg_info is fine because it just happens that the existing id generation after check_ctx_access() has covered it. It is also using the reg_type_may_be_null() to decide if id generation is needed or not. Fixes: af7ec1383361 ("bpf: Add bpf_skc_to_tcp6_sock() helper") Fixes: eaa6bcb71ef6 ("bpf: Introduce bpf_per_cpu_ptr()") Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20201019194212.1050855-1-kafai@fb.com
2020-10-19bpf: Remove unneeded breakTom Rix
A break is not needed if it is preceded by a return. Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20201019173846.1021-1-trix@redhat.com
2020-10-15Merge tag 'net-next-5.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: - Add redirect_neigh() BPF packet redirect helper, allowing to limit stack traversal in common container configs and improving TCP back-pressure. Daniel reports ~10Gbps => ~15Gbps single stream TCP performance gain. - Expand netlink policy support and improve policy export to user space. (Ge)netlink core performs request validation according to declared policies. Expand the expressiveness of those policies (min/max length and bitmasks). Allow dumping policies for particular commands. This is used for feature discovery by user space (instead of kernel version parsing or trial and error). - Support IGMPv3/MLDv2 multicast listener discovery protocols in bridge. - Allow more than 255 IPv4 multicast interfaces. - Add support for Type of Service (ToS) reflection in SYN/SYN-ACK packets of TCPv6. - In Multi-patch TCP (MPTCP) support concurrent transmission of data on multiple subflows in a load balancing scenario. Enhance advertising addresses via the RM_ADDR/ADD_ADDR options. - Support SMC-Dv2 version of SMC, which enables multi-subnet deployments. - Allow more calls to same peer in RxRPC. - Support two new Controller Area Network (CAN) protocols - CAN-FD and ISO 15765-2:2016. - Add xfrm/IPsec compat layer, solving the 32bit user space on 64bit kernel problem. - Add TC actions for implementing MPLS L2 VPNs. - Improve nexthop code - e.g. handle various corner cases when nexthop objects are removed from groups better, skip unnecessary notifications and make it easier to offload nexthops into HW by converting to a blocking notifier. - Support adding and consuming TCP header options by BPF programs, opening the doors for easy experimental and deployment-specific TCP option use. - Reorganize TCP congestion control (CC) initialization to simplify life of TCP CC implemented in BPF. - Add support for shipping BPF programs with the kernel and loading them early on boot via the User Mode Driver mechanism, hence reusing all the user space infra we have. - Support sleepable BPF programs, initially targeting LSM and tracing. - Add bpf_d_path() helper for returning full path for given 'struct path'. - Make bpf_tail_call compatible with bpf-to-bpf calls. - Allow BPF programs to call map_update_elem on sockmaps. - Add BPF Type Format (BTF) support for type and enum discovery, as well as support for using BTF within the kernel itself (current use is for pretty printing structures). - Support listing and getting information about bpf_links via the bpf syscall. - Enhance kernel interfaces around NIC firmware update. Allow specifying overwrite mask to control if settings etc. are reset during update; report expected max time operation may take to users; support firmware activation without machine reboot incl. limits of how much impact reset may have (e.g. dropping link or not). - Extend ethtool configuration interface to report IEEE-standard counters, to limit the need for per-vendor logic in user space. - Adopt or extend devlink use for debug, monitoring, fw update in many drivers (dsa loop, ice, ionic, sja1105, qed, mlxsw, mv88e6xxx, dpaa2-eth). - In mlxsw expose critical and emergency SFP module temperature alarms. Refactor port buffer handling to make the defaults more suitable and support setting these values explicitly via the DCBNL interface. - Add XDP support for Intel's igb driver. - Support offloading TC flower classification and filtering rules to mscc_ocelot switches. - Add PTP support for Marvell Octeontx2 and PP2.2 hardware, as well as fixed interval period pulse generator and one-step timestamping in dpaa-eth. - Add support for various auth offloads in WiFi APs, e.g. SAE (WPA3) offload. - Add Lynx PHY/PCS MDIO module, and convert various drivers which have this HW to use it. Convert mvpp2 to split PCS. - Support Marvell Prestera 98DX3255 24-port switch ASICs, as well as 7-port Mediatek MT7531 IP. - Add initial support for QCA6390 and IPQ6018 in ath11k WiFi driver, and wcn3680 support in wcn36xx. - Improve performance for packets which don't require much offloads on recent Mellanox NICs by 20% by making multiple packets share a descriptor entry. - Move chelsio inline crypto drivers (for TLS and IPsec) from the crypto subtree to drivers/net. Move MDIO drivers out of the phy directory. - Clean up a lot of W=1 warnings, reportedly the actively developed subsections of networking drivers should now build W=1 warning free. - Make sure drivers don't use in_interrupt() to dynamically adapt their code. Convert tasklets to use new tasklet_setup API (sadly this conversion is not yet complete). * tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2583 commits) Revert "bpfilter: Fix build error with CONFIG_BPFILTER_UMH" net, sockmap: Don't call bpf_prog_put() on NULL pointer bpf, selftest: Fix flaky tcp_hdr_options test when adding addr to lo bpf, sockmap: Add locking annotations to iterator netfilter: nftables: allow re-computing sctp CRC-32C in 'payload' statements net: fix pos incrementment in ipv6_route_seq_next net/smc: fix invalid return code in smcd_new_buf_create() net/smc: fix valid DMBE buffer sizes net/smc: fix use-after-free of delayed events bpfilter: Fix build error with CONFIG_BPFILTER_UMH cxgb4/ch_ipsec: Replace the module name to ch_ipsec from chcr net: sched: Fix suspicious RCU usage while accessing tcf_tunnel_info bpf: Fix register equivalence tracking. rxrpc: Fix loss of final ack on shutdown rxrpc: Fix bundle counting for exclusive connections netfilter: restore NF_INET_NUMHOOKS ibmveth: Identify ingress large send packets. ibmveth: Switch order of ibmveth_helper calls. cxgb4: handle 4-tuple PEDIT to NAT mode translation selftests: Add VRF route leaking tests ...
2020-10-15bpf: Fix register equivalence tracking.Alexei Starovoitov
The 64-bit JEQ/JNE handling in reg_set_min_max() was clearing reg->id in either true or false branch. In the case 'if (reg->id)' check was done on the other branch the counter part register would have reg->id == 0 when called into find_equal_scalars(). In such case the helper would incorrectly identify other registers with id == 0 as equivalent and propagate the state incorrectly. Fix it by preserving ID across reg_set_min_max(). In other words any kind of comparison operator on the scalar register should preserve its ID to recognize: r1 = r2 if (r1 == 20) { #1 here both r1 and r2 == 20 } else if (r2 < 20) { #2 here both r1 and r2 < 20 } The patch is addressing #1 case. The #2 was working correctly already. Fixes: 75748837b7e5 ("bpf: Propagate scalar ranges through register assignments.") Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Tested-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20201014175608.1416-1-alexei.starovoitov@gmail.com
2020-10-14Merge tag 'objtool-core-2020-10-13' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull objtool updates from Ingo Molnar: "Most of the changes are cleanups and reorganization to make the objtool code more arch-agnostic. This is in preparation for non-x86 support. Other changes: - KASAN fixes - Handle unreachable trap after call to noreturn functions better - Ignore unreachable fake jumps - Misc smaller fixes & cleanups" * tag 'objtool-core-2020-10-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits) perf build: Allow nested externs to enable BUILD_BUG() usage objtool: Allow nested externs to enable BUILD_BUG() objtool: Permit __kasan_check_{read,write} under UACCESS objtool: Ignore unreachable trap after call to noreturn functions objtool: Handle calling non-function symbols in other sections objtool: Ignore unreachable fake jumps objtool: Remove useless tests before save_reg() objtool: Decode unwind hint register depending on architecture objtool: Make unwind hint definitions available to other architectures objtool: Only include valid definitions depending on source file type objtool: Rename frame.h -> objtool.h objtool: Refactor jump table code to support other architectures objtool: Make relocation in alternative handling arch dependent objtool: Abstract alternative special case handling objtool: Move macros describing structures to arch-dependent code objtool: Make sync-check consider the target architecture objtool: Group headers to check in a single list objtool: Define 'struct orc_entry' only when needed objtool: Skip ORC entry creation for non-text sections objtool: Move ORC logic out of check() ...
2020-10-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski
Alexei Starovoitov says: ==================== pull-request: bpf-next 2020-10-12 The main changes are: 1) The BPF verifier improvements to track register allocation pattern, from Alexei and Yonghong. 2) libbpf relocation support for different size load/store, from Andrii. 3) bpf_redirect_peer() helper and support for inner map array with different max_entries, from Daniel. 4) BPF support for per-cpu variables, form Hao. 5) sockmap improvements, from John. ==================== Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-11bpf: Allow for map-in-map with dynamic inner array map entriesDaniel Borkmann
Recent work in f4d05259213f ("bpf: Add map_meta_equal map ops") and 134fede4eecf ("bpf: Relax max_entries check for most of the inner map types") added support for dynamic inner max elements for most map-in-map types. Exceptions were maps like array or prog array where the map_gen_lookup() callback uses the maps' max_entries field as a constant when emitting instructions. We recently implemented Maglev consistent hashing into Cilium's load balancer which uses map-in-map with an outer map being hash and inner being array holding the Maglev backend table for each service. This has been designed this way in order to reduce overall memory consumption given the outer hash map allows to avoid preallocating a large, flat memory area for all services. Also, the number of service mappings is not always known a-priori. The use case for dynamic inner array map entries is to further reduce memory overhead, for example, some services might just have a small number of back ends while others could have a large number. Right now the Maglev backend table for small and large number of backends would need to have the same inner array map entries which adds a lot of unneeded overhead. Dynamic inner array map entries can be realized by avoiding the inlined code generation for their lookup. The lookup will still be efficient since it will be calling into array_map_lookup_elem() directly and thus avoiding retpoline. The patch adds a BPF_F_INNER_MAP flag to map creation which therefore skips inline code generation and relaxes array_map_meta_equal() check to ignore both maps' max_entries. This also still allows to have faster lookups for map-in-map when BPF_F_INNER_MAP is not specified and hence dynamic max_entries not needed. Example code generation where inner map is dynamic sized array: # bpftool p d x i 125 int handle__sys_enter(void * ctx): ; int handle__sys_enter(void *ctx) 0: (b4) w1 = 0 ; int key = 0; 1: (63) *(u32 *)(r10 -4) = r1 2: (bf) r2 = r10 ; 3: (07) r2 += -4 ; inner_map = bpf_map_lookup_elem(&outer_arr_dyn, &key); 4: (18) r1 = map[id:468] 6: (07) r1 += 272 7: (61) r0 = *(u32 *)(r2 +0) 8: (35) if r0 >= 0x3 goto pc+5 9: (67) r0 <<= 3 10: (0f) r0 += r1 11: (79) r0 = *(u64 *)(r0 +0) 12: (15) if r0 == 0x0 goto pc+1 13: (05) goto pc+1 14: (b7) r0 = 0 15: (b4) w6 = -1 ; if (!inner_map) 16: (15) if r0 == 0x0 goto pc+6 17: (bf) r2 = r10 ; 18: (07) r2 += -4 ; val = bpf_map_lookup_elem(inner_map, &key); 19: (bf) r1 = r0 | No inlining but instead 20: (85) call array_map_lookup_elem#149280 | call to array_map_lookup_elem() ; return val ? *val : -1; | for inner array lookup. 21: (15) if r0 == 0x0 goto pc+1 ; return val ? *val : -1; 22: (61) r6 = *(u32 *)(r0 +0) ; } 23: (bc) w0 = w6 24: (95) exit Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20201010234006.7075-4-daniel@iogearbox.net
2020-10-09bpf: Track spill/fill of bounded scalars.Yonghong Song
Under register pressure the llvm may spill registers with bounds into the stack. The verifier has to track them through spill/fill otherwise many kinds of bound errors will be seen. The spill/fill of induction variables was already happening. This patch extends this logic from tracking spill/fill of a constant into any bounded register. There is no need to track spill/fill of unbounded, since no new information will be retrieved from the stack during register fill. Though extra stack difference could cause state pruning to be less effective, no adverse affects were seen from this patch on selftests and on cilium programs. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20201009011240.48506-3-alexei.starovoitov@gmail.com
2020-10-09bpf: Propagate scalar ranges through register assignments.Alexei Starovoitov
The llvm register allocator may use two different registers representing the same virtual register. In such case the following pattern can be observed: 1047: (bf) r9 = r6 1048: (a5) if r6 < 0x1000 goto pc+1 1050: ... 1051: (a5) if r9 < 0x2 goto pc+66 1052: ... 1053: (bf) r2 = r9 /* r2 needs to have upper and lower bounds */ This is normal behavior of greedy register allocator. The slides 137+ explain why regalloc introduces such register copy: http://llvm.org/devmtg/2018-04/slides/Yatsina-LLVM%20Greedy%20Register%20Allocator.pdf There is no way to tell llvm 'not to do this'. Hence the verifier has to recognize such patterns. In order to track this information without backtracking allocate ID for scalars in a similar way as it's done for find_good_pkt_pointers(). When the verifier encounters r9 = r6 assignment it will assign the same ID to both registers. Later if either register range is narrowed via conditional jump propagate the register state into the other register. Clear register ID in adjust_reg_min_max_vals() for any alu instruction. The register ID is ignored for scalars in regsafe() and doesn't affect state pruning. mark_reg_unknown() clears the ID. It's used to process call, endian and other instructions. Hence ID is explicitly cleared only in adjust_reg_min_max_vals() and in 32-bit mov. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20201009011240.48506-2-alexei.starovoitov@gmail.com
2020-10-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Small conflict around locking in rxrpc_process_event() - channel_lock moved to bundle in next, while state lock needs _bh() from net. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-08bpf: Fix scalar32_min_max_or bounds trackingDaniel Borkmann
Simon reported an issue with the current scalar32_min_max_or() implementation. That is, compared to the other 32 bit subreg tracking functions, the code in scalar32_min_max_or() stands out that it's using the 64 bit registers instead of 32 bit ones. This leads to bounds tracking issues, for example: [...] 8: R0=map_value(id=0,off=0,ks=4,vs=48,imm=0) R10=fp0 fp-8=mmmmmmmm 8: (79) r1 = *(u64 *)(r0 +0) R0=map_value(id=0,off=0,ks=4,vs=48,imm=0) R10=fp0 fp-8=mmmmmmmm 9: R0=map_value(id=0,off=0,ks=4,vs=48,imm=0) R1_w=inv(id=0) R10=fp0 fp-8=mmmmmmmm 9: (b7) r0 = 1 10: R0_w=inv1 R1_w=inv(id=0) R10=fp0 fp-8=mmmmmmmm 10: (18) r2 = 0x600000002 12: R0_w=inv1 R1_w=inv(id=0) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm 12: (ad) if r1 < r2 goto pc+1 R0_w=inv1 R1_w=inv(id=0,umin_value=25769803778) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm 13: R0_w=inv1 R1_w=inv(id=0,umin_value=25769803778) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm 13: (95) exit 14: R0_w=inv1 R1_w=inv(id=0,umax_value=25769803777,var_off=(0x0; 0x7ffffffff)) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm 14: (25) if r1 > 0x0 goto pc+1 R0_w=inv1 R1_w=inv(id=0,umax_value=0,var_off=(0x0; 0x7fffffff),u32_max_value=2147483647) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm 15: R0_w=inv1 R1_w=inv(id=0,umax_value=0,var_off=(0x0; 0x7fffffff),u32_max_value=2147483647) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm 15: (95) exit 16: R0_w=inv1 R1_w=inv(id=0,umin_value=1,umax_value=25769803777,var_off=(0x0; 0x77fffffff),u32_max_value=2147483647) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm 16: (47) r1 |= 0 17: R0_w=inv1 R1_w=inv(id=0,umin_value=1,umax_value=32212254719,var_off=(0x1; 0x700000000),s32_max_value=1,u32_max_value=1) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm [...] The bound tests on the map value force the upper unsigned bound to be 25769803777 in 64 bit (0b11000000000000000000000000000000001) and then lower one to be 1. By using OR they are truncated and thus result in the range [1,1] for the 32 bit reg tracker. This is incorrect given the only thing we know is that the value must be positive and thus 2147483647 (0b1111111111111111111111111111111) at max for the subregs. Fix it by using the {u,s}32_{min,max}_value vars instead. This also makes sense, for example, for the case where we update dst_reg->s32_{min,max}_value in the else branch we need to use the newly computed dst_reg->u32_{min,max}_value as we know that these are positive. Previously, in the else branch the 64 bit values of umin_value=1 and umax_value=32212254719 were used and latter got truncated to be 1 as upper bound there. After the fix the subreg range is now correct: [...] 8: R0=map_value(id=0,off=0,ks=4,vs=48,imm=0) R10=fp0 fp-8=mmmmmmmm 8: (79) r1 = *(u64 *)(r0 +0) R0=map_value(id=0,off=0,ks=4,vs=48,imm=0) R10=fp0 fp-8=mmmmmmmm 9: R0=map_value(id=0,off=0,ks=4,vs=48,imm=0) R1_w=inv(id=0) R10=fp0 fp-8=mmmmmmmm 9: (b7) r0 = 1 10: R0_w=inv1 R1_w=inv(id=0) R10=fp0 fp-8=mmmmmmmm 10: (18) r2 = 0x600000002 12: R0_w=inv1 R1_w=inv(id=0) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm 12: (ad) if r1 < r2 goto pc+1 R0_w=inv1 R1_w=inv(id=0,umin_value=25769803778) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm 13: R0_w=inv1 R1_w=inv(id=0,umin_value=25769803778) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm 13: (95) exit 14: R0_w=inv1 R1_w=inv(id=0,umax_value=25769803777,var_off=(0x0; 0x7ffffffff)) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm 14: (25) if r1 > 0x0 goto pc+1 R0_w=inv1 R1_w=inv(id=0,umax_value=0,var_off=(0x0; 0x7fffffff),u32_max_value=2147483647) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm 15: R0_w=inv1 R1_w=inv(id=0,umax_value=0,var_off=(0x0; 0x7fffffff),u32_max_value=2147483647) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm 15: (95) exit 16: R0_w=inv1 R1_w=inv(id=0,umin_value=1,umax_value=25769803777,var_off=(0x0; 0x77fffffff),u32_max_value=2147483647) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm 16: (47) r1 |= 0 17: R0_w=inv1 R1_w=inv(id=0,umin_value=1,umax_value=32212254719,var_off=(0x0; 0x77fffffff),u32_max_value=2147483647) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm [...] Fixes: 3f50f132d840 ("bpf: Verifier, do explicit ALU32 bounds tracking") Reported-by: Simon Scannell <scannell.smn@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org>
2020-10-07kernel/bpf/verifier: Fix build when NET is not enabledRandy Dunlap
Fix build errors in kernel/bpf/verifier.c when CONFIG_NET is not enabled. ../kernel/bpf/verifier.c:3995:13: error: ‘btf_sock_ids’ undeclared here (not in a function); did you mean ‘bpf_sock_ops’? .btf_id = &btf_sock_ids[BTF_SOCK_TYPE_SOCK_COMMON], ../kernel/bpf/verifier.c:3995:26: error: ‘BTF_SOCK_TYPE_SOCK_COMMON’ undeclared here (not in a function); did you mean ‘PTR_TO_SOCK_COMMON’? .btf_id = &btf_sock_ids[BTF_SOCK_TYPE_SOCK_COMMON], Fixes: 1df8f55a37bd ("bpf: Enable bpf_skc_to_* sock casting helper to networking prog type") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20201007021613.13646-1-rdunlap@infradead.org
2020-10-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Rejecting non-native endian BTF overlapped with the addition of support for it. The rest were more simple overlapping changes, except the renesas ravb binding update, which had to follow a file move as well as a YAML conversion. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-06bpf: Use raw_spin_trylock() for pcpu_freelist_push/pop in NMISong Liu
Recent improvements in LOCKDEP highlighted a potential A-A deadlock with pcpu_freelist in NMI: ./tools/testing/selftests/bpf/test_progs -t stacktrace_build_id_nmi [ 18.984807] ================================ [ 18.984807] WARNING: inconsistent lock state [ 18.984808] 5.9.0-rc6-01771-g1466de1330e1 #2967 Not tainted [ 18.984809] -------------------------------- [ 18.984809] inconsistent {INITIAL USE} -> {IN-NMI} usage. [ 18.984810] test_progs/1990 [HC2[2]:SC0[0]:HE0:SE1] takes: [ 18.984810] ffffe8ffffc219c0 (&head->lock){....}-{2:2}, at: __pcpu_freelist_pop+0xe3/0x180 [ 18.984813] {INITIAL USE} state was registered at: [ 18.984814] lock_acquire+0x175/0x7c0 [ 18.984814] _raw_spin_lock+0x2c/0x40 [ 18.984815] __pcpu_freelist_pop+0xe3/0x180 [ 18.984815] pcpu_freelist_pop+0x31/0x40 [ 18.984816] htab_map_alloc+0xbbf/0xf40 [ 18.984816] __do_sys_bpf+0x5aa/0x3ed0 [ 18.984817] do_syscall_64+0x2d/0x40 [ 18.984818] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 18.984818] irq event stamp: 12 [...] [ 18.984822] other info that might help us debug this: [ 18.984823] Possible unsafe locking scenario: [ 18.984823] [ 18.984824] CPU0 [ 18.984824] ---- [ 18.984824] lock(&head->lock); [ 18.984826] <Interrupt> [ 18.984826] lock(&head->lock); [ 18.984827] [ 18.984828] *** DEADLOCK *** [ 18.984828] [ 18.984829] 2 locks held by test_progs/1990: [...] [ 18.984838] <NMI> [ 18.984838] dump_stack+0x9a/0xd0 [ 18.984839] lock_acquire+0x5c9/0x7c0 [ 18.984839] ? lock_release+0x6f0/0x6f0 [ 18.984840] ? __pcpu_freelist_pop+0xe3/0x180 [ 18.984840] _raw_spin_lock+0x2c/0x40 [ 18.984841] ? __pcpu_freelist_pop+0xe3/0x180 [ 18.984841] __pcpu_freelist_pop+0xe3/0x180 [ 18.984842] pcpu_freelist_pop+0x17/0x40 [ 18.984842] ? lock_release+0x6f0/0x6f0 [ 18.984843] __bpf_get_stackid+0x534/0xaf0 [ 18.984843] bpf_prog_1fd9e30e1438d3c5_oncpu+0x73/0x350 [ 18.984844] bpf_overflow_handler+0x12f/0x3f0 This is because pcpu_freelist_head.lock is accessed in both NMI and non-NMI context. Fix this issue by using raw_spin_trylock() in NMI. Since NMI interrupts non-NMI context, when NMI context tries to lock the raw_spinlock, non-NMI context of the same CPU may already have locked a lock and is blocked from unlocking the lock. For a system with N CPUs, there could be N NMIs at the same time, and they may block N non-NMI raw_spinlocks. This is tricky for pcpu_freelist_push(), where unlike _pop(), failing _push() means leaking memory. This issue is more likely to trigger in non-SMP system. Fix this issue with an extra list, pcpu_freelist.extralist. The extralist is primarily used to take _push() when raw_spin_trylock() failed on all the per CPU lists. It should be empty most of the time. The following table summarizes the behavior of pcpu_freelist in NMI and non-NMI: non-NMI pop(): use _lock(); check per CPU lists first; if all per CPU lists are empty, check extralist; if extralist is empty, return NULL. non-NMI push(): use _lock(); only push to per CPU lists. NMI pop(): use _trylock(); check per CPU lists first; if all per CPU lists are locked or empty, check extralist; if extralist is locked or empty, return NULL. NMI push(): use _trylock(); check per CPU lists first; if all per CPU lists are locked; try push to extralist; if extralist is also locked, keep trying on per CPU lists. Reported-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20201005165838.3735218-1-songliubraving@fb.com
2020-10-05bpf, verifier: Use fallthrough pseudo-keywordGustavo A. R. Silva
Replace /* fallthrough */ comments with the new pseudo-keyword macro fallthrough [1]. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20201002234217.GA12280@embeddedor
2020-10-02bpf: Deref map in BPF_PROG_BIND_MAP when it's already usedStanislav Fomichev
We are missing a deref for the case when we are doing BPF_PROG_BIND_MAP on a map that's being already held by the program. There is 'if (ret) bpf_map_put(map)' below which doesn't trigger because we don't consider this an error. Let's add missing bpf_map_put() for this specific condition. Fixes: ef15314aa5de ("bpf: Add BPF_PROG_BIND_MAP syscall") Reported-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20201003002544.3601440-1-sdf@google.com
2020-10-02bpf: Introducte bpf_this_cpu_ptr()Hao Luo
Add bpf_this_cpu_ptr() to help access percpu var on this cpu. This helper always returns a valid pointer, therefore no need to check returned value for NULL. Also note that all programs run with preemption disabled, which means that the returned pointer is stable during all the execution of the program. Signed-off-by: Hao Luo <haoluo@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200929235049.2533242-6-haoluo@google.com
2020-10-02bpf: Introduce bpf_per_cpu_ptr()Hao Luo
Add bpf_per_cpu_ptr() to help bpf programs access percpu vars. bpf_per_cpu_ptr() has the same semantic as per_cpu_ptr() in the kernel except that it may return NULL. This happens when the cpu parameter is out of range. So the caller must check the returned value. Signed-off-by: Hao Luo <haoluo@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200929235049.2533242-5-haoluo@google.com
2020-10-02bpf: Introduce pseudo_btf_idHao Luo
Pseudo_btf_id is a type of ld_imm insn that associates a btf_id to a ksym so that further dereferences on the ksym can use the BTF info to validate accesses. Internally, when seeing a pseudo_btf_id ld insn, the verifier reads the btf_id stored in the insn[0]'s imm field and marks the dst_reg as PTR_TO_BTF_ID. The btf_id points to a VAR_KIND, which is encoded in btf_vminux by pahole. If the VAR is not of a struct type, the dst reg will be marked as PTR_TO_MEM instead of PTR_TO_BTF_ID and the mem_size is resolved to the size of the VAR's type. >From the VAR btf_id, the verifier can also read the address of the ksym's corresponding kernel var from kallsyms and use that to fill dst_reg. Therefore, the proper functionality of pseudo_btf_id depends on (1) kallsyms and (2) the encoding of kernel global VARs in pahole, which should be available since pahole v1.18. Signed-off-by: Hao Luo <haoluo@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200929235049.2533242-2-haoluo@google.com
2020-09-30bpf: Introduce BPF_F_PRESERVE_ELEMS for perf event arraySong Liu
Currently, perf event in perf event array is removed from the array when the map fd used to add the event is closed. This behavior makes it difficult to the share perf events with perf event array. Introduce perf event map that keeps the perf event open with a new flag BPF_F_PRESERVE_ELEMS. With this flag set, perf events in the array are not removed when the original map fd is closed. Instead, the perf event will stay in the map until 1) it is explicitly removed from the array; or 2) the array is freed. Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200930224927.1936644-2-songliubraving@fb.com
2020-09-30bpf, net: Rework cookie generator as per-cpu oneDaniel Borkmann
With its use in BPF, the cookie generator can be called very frequently in particular when used out of cgroup v2 hooks (e.g. connect / sendmsg) and attached to the root cgroup, for example, when used in v1/v2 mixed environments. In particular, when there's a high churn on sockets in the system there can be many parallel requests to the bpf_get_socket_cookie() and bpf_get_netns_cookie() helpers which then cause contention on the atomic counter. As similarly done in f991bd2e1421 ("fs: introduce a per-cpu last_ino allocator"), add a small helper library that both can use for the 64 bit counters. Given this can be called from different contexts, we also need to deal with potential nested calls even though in practice they are considered extremely rare. One idea as suggested by Eric Dumazet was to use a reverse counter for this situation since we don't expect 64 bit overflows anyways; that way, we can avoid bigger gaps in the 64 bit counter space compared to just batch-wise increase. Even on machines with small number of cores (e.g. 4) the cookie generation shrinks from min/max/med/avg (ns) of 22/50/40/38.9 down to 10/35/14/17.3 when run in parallel from multiple CPUs. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Link: https://lore.kernel.org/bpf/8a80b8d27d3c49f9a14e1d5213c19d8be87d1dc8.1601477936.git.daniel@iogearbox.net
2020-09-29bpf: Fix context type resolving for extension programsToke Høiland-Jørgensen
Eelco reported we can't properly access arguments if the tracing program is attached to extension program. Having following program: SEC("classifier/test_pkt_md_access") int test_pkt_md_access(struct __sk_buff *skb) with its extension: SEC("freplace/test_pkt_md_access") int test_pkt_md_access_new(struct __sk_buff *skb) and tracing that extension with: SEC("fentry/test_pkt_md_access_new") int BPF_PROG(fentry, struct sk_buff *skb) It's not possible to access skb argument in the fentry program, with following error from verifier: ; int BPF_PROG(fentry, struct sk_buff *skb) 0: (79) r1 = *(u64 *)(r1 +0) invalid bpf_context access off=0 size=8 The problem is that btf_ctx_access gets the context type for the traced program, which is in this case the extension. But when we trace extension program, we want to get the context type of the program that the extension is attached to, so we can access the argument properly in the trace program. This version of the patch is tweaked slightly from Jiri's original one, since the refactoring in the previous patches means we have to get the target prog type from the new variable in prog->aux instead of directly from the target prog. Reported-by: Eelco Chaudron <echaudro@redhat.com> Suggested-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/160138355278.48470.17057040257274725638.stgit@toke.dk
2020-09-29bpf: Support attaching freplace programs to multiple attach pointsToke Høiland-Jørgensen
This enables support for attaching freplace programs to multiple attach points. It does this by amending the UAPI for bpf_link_Create with a target btf ID that can be used to supply the new attachment point along with the target program fd. The target must be compatible with the target that was supplied at program load time. The implementation reuses the checks that were factored out of check_attach_btf_id() to ensure compatibility between the BTF types of the old and new attachment. If these match, a new bpf_tracing_link will be created for the new attach target, allowing multiple attachments to co-exist simultaneously. The code could theoretically support multiple-attach of other types of tracing programs as well, but since I don't have a use case for any of those, there is no API support for doing so. Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/160138355169.48470.17165680973640685368.stgit@toke.dk
2020-09-29bpf: Move prog->aux->linked_prog and trampoline into bpf_link on attachToke Høiland-Jørgensen
In preparation for allowing multiple attachments of freplace programs, move the references to the target program and trampoline into the bpf_tracing_link structure when that is created. To do this atomically, introduce a new mutex in prog->aux to protect writing to the two pointers to target prog and trampoline, and rename the members to make it clear that they are related. With this change, it is no longer possible to attach the same tracing program multiple times (detaching in-between), since the reference from the tracing program to the target disappears on the first attach. However, since the next patch will let the caller supply an attach target, that will also make it possible to attach to the same place multiple times. Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/160138355059.48470.2503076992210324984.stgit@toke.dk
2020-09-29bpf/preload: Make sure Makefile cleans up after itself, and add .gitignoreToke Høiland-Jørgensen
The Makefile in bpf/preload builds a local copy of libbpf, but does not properly clean up after itself. This can lead to subsequent compilation failures, since the feature detection cache is kept around which can lead subsequent detection to fail. Fix this by properly setting clean-files, and while we're at it, also add a .gitignore for the directory to ignore the build artifacts. Fixes: d71fa5c9763c ("bpf: Add kernel module with user mode driver that populates bpffs.") Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200927193005.8459-1-toke@redhat.com
2020-09-28bpf: Add bpf_seq_printf_btf helperAlan Maguire
A helper is added to allow seq file writing of kernel data structures using vmlinux BTF. Its signature is long bpf_seq_printf_btf(struct seq_file *m, struct btf_ptr *ptr, u32 btf_ptr_size, u64 flags); Flags and struct btf_ptr definitions/use are identical to the bpf_snprintf_btf helper, and the helper returns 0 on success or a negative error value. Suggested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com> Signed-off-by: Alan Maguire <alan.maguire@oracle.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/1601292670-1616-8-git-send-email-alan.maguire@oracle.com
2020-09-28bpf: Bump iter seq size to support BTF representation of large data structuresAlan Maguire
BPF iter size is limited to PAGE_SIZE; if we wish to display BTF-based representations of larger kernel data structures such as task_struct, this will be insufficient. Suggested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com> Signed-off-by: Alan Maguire <alan.maguire@oracle.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/1601292670-1616-6-git-send-email-alan.maguire@oracle.com
2020-09-28bpf: Add bpf_snprintf_btf helperAlan Maguire
A helper is added to support tracing kernel type information in BPF using the BPF Type Format (BTF). Its signature is long bpf_snprintf_btf(char *str, u32 str_size, struct btf_ptr *ptr, u32 btf_ptr_size, u64 flags); struct btf_ptr * specifies - a pointer to the data to be traced - the BTF id of the type of data pointed to - a flags field is provided for future use; these flags are not to be confused with the BTF_F_* flags below that control how the btf_ptr is displayed; the flags member of the struct btf_ptr may be used to disambiguate types in kernel versus module BTF, etc; the main distinction is the flags relate to the type and information needed in identifying it; not how it is displayed. For example a BPF program with a struct sk_buff *skb could do the following: static struct btf_ptr b = { }; b.ptr = skb; b.type_id = __builtin_btf_type_id(struct sk_buff, 1); bpf_snprintf_btf(str, sizeof(str), &b, sizeof(b), 0, 0); Default output looks like this: (struct sk_buff){ .transport_header = (__u16)65535, .mac_header = (__u16)65535, .end = (sk_buff_data_t)192, .head = (unsigned char *)0x000000007524fd8b, .data = (unsigned char *)0x000000007524fd8b, .truesize = (unsigned int)768, .users = (refcount_t){ .refs = (atomic_t){ .counter = (int)1, }, }, } Flags modifying display are as follows: - BTF_F_COMPACT: no formatting around type information - BTF_F_NONAME: no struct/union member names/types - BTF_F_PTR_RAW: show raw (unobfuscated) pointer values; equivalent to %px. - BTF_F_ZERO: show zero-valued struct/union members; they are not displayed by default Signed-off-by: Alan Maguire <alan.maguire@oracle.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/1601292670-1616-4-git-send-email-alan.maguire@oracle.com
2020-09-28bpf: Move to generic BTF show support, apply it to seq files/stringsAlan Maguire
generalize the "seq_show" seq file support in btf.c to support a generic show callback of which we support two instances; the current seq file show, and a show with snprintf() behaviour which instead writes the type data to a supplied string. Both classes of show function call btf_type_show() with different targets; the seq file or the string to be written. In the string case we need to track additional data - length left in string to write and length to return that we would have written (a la snprintf). By default show will display type information, field members and their types and values etc, and the information is indented based upon structure depth. Zeroed fields are omitted. Show however supports flags which modify its behaviour: BTF_SHOW_COMPACT - suppress newline/indent. BTF_SHOW_NONAME - suppress show of type and member names. BTF_SHOW_PTR_RAW - do not obfuscate pointer values. BTF_SHOW_UNSAFE - do not copy data to safe buffer before display. BTF_SHOW_ZERO - show zeroed values (by default they are not shown). Signed-off-by: Alan Maguire <alan.maguire@oracle.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/1601292670-1616-3-git-send-email-alan.maguire@oracle.com
2020-09-28bpf: Provide function to get vmlinux BTF informationAlan Maguire
It will be used later for BPF structure display support Signed-off-by: Alan Maguire <alan.maguire@oracle.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/1601292670-1616-2-git-send-email-alan.maguire@oracle.com
2020-09-28bpf: verifier: refactor check_attach_btf_id()Toke Høiland-Jørgensen
The check_attach_btf_id() function really does three things: 1. It performs a bunch of checks on the program to ensure that the attachment is valid. 2. It stores a bunch of state about the attachment being requested in the verifier environment and struct bpf_prog objects. 3. It allocates a trampoline for the attachment. This patch splits out (1.) and (3.) into separate functions which will perform the checks, but return the computed values instead of directly modifying the environment. This is done in preparation for reusing the checks when the actual attachment is happening, which will allow tracing programs to have multiple (compatible) attachments. This also fixes a bug where a bunch of checks were skipped if a trampoline already existed for the tracing target. Fixes: 6ba43b761c41 ("bpf: Attachment verification for BPF_MODIFY_RETURN") Fixes: 1e6c62a88215 ("bpf: Introduce sleepable BPF programs") Acked-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2020-09-28bpf: change logging calls from verbose() to bpf_log() and use log pointerToke Høiland-Jørgensen
In preparation for moving code around, change a bunch of references to env->log (and the verbose() logging helper) to use bpf_log() and a direct pointer to struct bpf_verifier_log. While we're touching the function signature, mark the 'prog' argument to bpf_check_type_match() as const. Also enhance the bpf_verifier_log_needed() check to handle NULL pointers for the log struct so we can re-use the code with logging disabled. Acked-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2020-09-28bpf: disallow attaching modify_return tracing functions to other BPF programsToke Høiland-Jørgensen
From the checks and commit messages for modify_return, it seems it was never the intention that it should be possible to attach a tracing program with expected_attach_type == BPF_MODIFY_RETURN to another BPF program. However, check_attach_modify_return() will only look at the function name, so if the target function starts with "security_", the attach will be allowed even for bpf2bpf attachment. Fix this oversight by also blocking the modification if a target program is supplied. Fixes: 18644cec714a ("bpf: Fix use-after-free in fmod_ret check") Fixes: 6ba43b761c41 ("bpf: Attachment verification for BPF_MODIFY_RETURN") Acked-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2020-09-28bpf: sockmap: Enable map_update_elem from bpf_iterLorenz Bauer
Allow passing a pointer to a BTF struct sock_common* when updating a sockmap or sockhash. Since BTF pointers can fault and therefore be NULL at runtime we need to add an additional !sk check to sock_map_update_elem. Since we may be passed a request or timewait socket we also need to check sk_fullsock. Doing this allows calling map_update_elem on sockmap from bpf_iter context, which uses BTF pointers. Signed-off-by: Lorenz Bauer <lmb@cloudflare.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200928090805.23343-2-lmb@cloudflare.com
2020-09-28bpf, cpumap: Remove rcpu pointer from cpu_map_build_skb signatureLorenzo Bianconi
Get rid of bpf_cpu_map_entry pointer in cpu_map_build_skb routine signature since it is no longer needed. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/33cb9b7dc447de3ea6fd6ce713ac41bca8794423.1601292015.git.lorenzo@kernel.org
2020-09-28bpf: Enable BPF_PROG_TEST_RUN for raw_tracepointSong Liu
Add .test_run for raw_tracepoint. Also, introduce a new feature that runs the target program on a specific CPU. This is achieved by a new flag in bpf_attr.test, BPF_F_TEST_RUN_ON_CPU. When this flag is set, the program is triggered on cpu with id bpf_attr.test.cpu. This feature is needed for BPF programs that handle perf_event and other percpu resources, as the program can access these resource locally. Signed-off-by: Song Liu <songliubraving@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200925205432.1777-2-songliubraving@fb.com
2020-09-25bpf, verifier: Remove redundant var_off.value ops in scalar known reg casesJohn Fastabend
In BPF_AND and BPF_OR alu cases we have this pattern when the src and dst tnum is a constant. 1 dst_reg->var_off = tnum_[op](dst_reg->var_off, src_reg.var_off) 2 scalar32_min_max_[op] 3 if (known) return 4 scalar_min_max_[op] 5 if (known) 6 __mark_reg_known(dst_reg, dst_reg->var_off.value [op] src_reg.var_off.value) The result is in 1 we calculate the var_off value and store it in the dst_reg. Then in 6 we duplicate this logic doing the op again on the value. The duplication comes from the the tnum_[op] handlers because they have already done the value calcuation. For example this is tnum_and(). struct tnum tnum_and(struct tnum a, struct tnum b) { u64 alpha, beta, v; alpha = a.value | a.mask; beta = b.value | b.mask; v = a.value & b.value; return TNUM(v, alpha & beta & ~v); } So lets remove the redundant op calculation. Its confusing for readers and unnecessary. Its also not harmful because those ops have the property, r1 & r1 = r1 and r1 | r1 = r1. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2020-09-25bpf: Change bpf_sk_storage_*() to accept ARG_PTR_TO_BTF_ID_SOCK_COMMONMartin KaFai Lau
This patch changes the bpf_sk_storage_*() to take ARG_PTR_TO_BTF_ID_SOCK_COMMON such that they will work with the pointer returned by the bpf_skc_to_*() helpers also. A micro benchmark has been done on a "cgroup_skb/egress" bpf program which does a bpf_sk_storage_get(). It was driven by netperf doing a 4096 connected UDP_STREAM test with 64bytes packet. The stats from "kernel.bpf_stats_enabled" shows no meaningful difference. The sk_storage_get_btf_proto, sk_storage_delete_btf_proto, btf_sk_storage_get_proto, and btf_sk_storage_delete_proto are no longer needed, so they are removed. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Lorenz Bauer <lmb@cloudflare.com> Link: https://lore.kernel.org/bpf/20200925000402.3856307-1-kafai@fb.com
2020-09-25bpf: Enable bpf_skc_to_* sock casting helper to networking prog typeMartin KaFai Lau
There is a constant need to add more fields into the bpf_tcp_sock for the bpf programs running at tc, sock_ops...etc. A current workaround could be to use bpf_probe_read_kernel(). However, other than making another helper call for reading each field and missing CO-RE, it is also not as intuitive to use as directly reading "tp->lsndtime" for example. While already having perfmon cap to do bpf_probe_read_kernel(), it will be much easier if the bpf prog can directly read from the tcp_sock. This patch tries to do that by using the existing casting-helpers bpf_skc_to_*() whose func_proto returns a btf_id. For example, the func_proto of bpf_skc_to_tcp_sock returns the btf_id of the kernel "struct tcp_sock". These helpers are also added to is_ptr_cast_function(). It ensures the returning reg (BPF_REF_0) will also carries the ref_obj_id. That will keep the ref-tracking works properly. The bpf_skc_to_* helpers are made available to most of the bpf prog types in filter.c. The bpf_skc_to_* helpers will be limited by perfmon cap. This patch adds a ARG_PTR_TO_BTF_ID_SOCK_COMMON. The helper accepting this arg can accept a btf-id-ptr (PTR_TO_BTF_ID + &btf_sock_ids[BTF_SOCK_TYPE_SOCK_COMMON]) or a legacy-ctx-convert-skc-ptr (PTR_TO_SOCK_COMMON). The bpf_skc_to_*() helpers are changed to take ARG_PTR_TO_BTF_ID_SOCK_COMMON such that they will accept pointer obtained from skb->sk. Instead of specifying both arg_type and arg_btf_id in the same func_proto which is how the current ARG_PTR_TO_BTF_ID does, the arg_btf_id of the new ARG_PTR_TO_BTF_ID_SOCK_COMMON is specified in the compatible_reg_types[] in verifier.c. The reason is the arg_btf_id is always the same. Discussion in this thread: https://lore.kernel.org/bpf/20200922070422.1917351-1-kafai@fb.com/ The ARG_PTR_TO_BTF_ID_ part gives a clear expectation that the helper is expecting a PTR_TO_BTF_ID which could be NULL. This is the same behavior as the existing helper taking ARG_PTR_TO_BTF_ID. The _SOCK_COMMON part means the helper is also expecting the legacy SOCK_COMMON pointer. By excluding the _OR_NULL part, the bpf prog cannot call helper with a literal NULL which doesn't make sense in most cases. e.g. bpf_skc_to_tcp_sock(NULL) will be rejected. All PTR_TO_*_OR_NULL reg has to do a NULL check first before passing into the helper or else the bpf prog will be rejected. This behavior is nothing new and consistent with the current expectation during bpf-prog-load. [ ARG_PTR_TO_BTF_ID_SOCK_COMMON will be used to replace ARG_PTR_TO_SOCK* of other existing helpers later such that those existing helpers can take the PTR_TO_BTF_ID returned by the bpf_skc_to_*() helpers. The only special case is bpf_sk_lookup_assign() which can accept a literal NULL ptr. It has to be handled specially in another follow up patch if there is a need (e.g. by renaming ARG_PTR_TO_SOCKET_OR_NULL to ARG_PTR_TO_BTF_ID_SOCK_COMMON_OR_NULL). ] [ When converting the older helpers that take ARG_PTR_TO_SOCK* in the later patch, if the kernel does not support BTF, ARG_PTR_TO_BTF_ID_SOCK_COMMON will behave like ARG_PTR_TO_SOCK_COMMON because no reg->type could have PTR_TO_BTF_ID in this case. It is not a concern for the newer-btf-only helper like the bpf_skc_to_*() here though because these helpers must require BTF vmlinux to begin with. ] Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20200925000350.3855720-1-kafai@fb.com
2020-09-25bpf: Move the PTR_TO_BTF_ID check to check_reg_type()Martin KaFai Lau
check_reg_type() checks whether a reg can be used as an arg of a func_proto. For PTR_TO_BTF_ID, the check is actually not completely done until the reg->btf_id is pointing to a kernel struct that is acceptable by the func_proto. Thus, this patch moves the btf_id check into check_reg_type(). "arg_type" and "arg_btf_id" are passed to check_reg_type() instead of "compatible". The compatible_reg_types[] usage is localized in check_reg_type() now. The "if (!btf_id) verbose(...); " is also removed since it won't happen. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Lorenz Bauer <lmb@cloudflare.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20200925000344.3854828-1-kafai@fb.com
2020-09-23Revert "bpf: Fix potential call bpf_link_free() in atomic context"Alexei Starovoitov
This reverts commit 31f23a6a181c81543b10a1a9056b0e6c7ef1c747. This change made many selftests/bpf flaky: flow_dissector, sk_lookup, sk_assign and others. There was no issue in the code. Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2020-09-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller
Alexei Starovoitov says: ==================== pull-request: bpf-next 2020-09-23 The following pull-request contains BPF updates for your *net-next* tree. We've added 95 non-merge commits during the last 22 day(s) which contain a total of 124 files changed, 4211 insertions(+), 2040 deletions(-). The main changes are: 1) Full multi function support in libbpf, from Andrii. 2) Refactoring of function argument checks, from Lorenz. 3) Make bpf_tail_call compatible with functions (subprograms), from Maciej. 4) Program metadata support, from YiFei. 5) bpf iterator optimizations, from Yonghong. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-23bpf: Explicitly size compatible_reg_typesLorenz Bauer
Arrays with designated initializers have an implicit length of the highest initialized value plus one. I used this to ensure that newly added entries in enum bpf_reg_type get a NULL entry in compatible_reg_types. This is difficult to understand since it requires knowledge of the peculiarities of designated initializers. Use __BPF_ARG_TYPE_MAX to size the array instead. Suggested-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Lorenz Bauer <lmb@cloudflare.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20200923160156.80814-1-lmb@cloudflare.com
2020-09-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Two minor conflicts: 1) net/ipv4/route.c, adding a new local variable while moving another local variable and removing it's initial assignment. 2) drivers/net/dsa/microchip/ksz9477.c, overlapping changes. One pretty prints the port mode differently, whilst another changes the driver to try and obtain the port mode from the port node rather than the switch node. Signed-off-by: David S. Miller <davem@davemloft.net>