summaryrefslogtreecommitdiff
path: root/kernel/time
AgeCommit message (Collapse)Author
2013-09-18Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fix from Ingo Molnar: "An NTP related lockup fix" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timekeeping: Fix HRTICK related deadlock from ntp lock changes
2013-09-12timekeeping: Fix HRTICK related deadlock from ntp lock changesJohn Stultz
Gerlando Falauto reported that when HRTICK is enabled, it is possible to trigger system deadlocks. These were hard to reproduce, as HRTICK has been broken in the past, but seemed to be connected to the timekeeping_seq lock. Since seqlock/seqcount's aren't supported w/ lockdep, I added some extra spinlock based locking and triggered the following lockdep output: [ 15.849182] ntpd/4062 is trying to acquire lock: [ 15.849765] (&(&pool->lock)->rlock){..-...}, at: [<ffffffff810aa9b5>] __queue_work+0x145/0x480 [ 15.850051] [ 15.850051] but task is already holding lock: [ 15.850051] (timekeeper_lock){-.-.-.}, at: [<ffffffff810df6df>] do_adjtimex+0x7f/0x100 <snip> [ 15.850051] Chain exists of: &(&pool->lock)->rlock --> &p->pi_lock --> timekeeper_lock [ 15.850051] Possible unsafe locking scenario: [ 15.850051] [ 15.850051] CPU0 CPU1 [ 15.850051] ---- ---- [ 15.850051] lock(timekeeper_lock); [ 15.850051] lock(&p->pi_lock); [ 15.850051] lock(timekeeper_lock); [ 15.850051] lock(&(&pool->lock)->rlock); [ 15.850051] [ 15.850051] *** DEADLOCK *** The deadlock was introduced by 06c017fdd4dc48451a ("timekeeping: Hold timekeepering locks in do_adjtimex and hardpps") in 3.10 This patch avoids this deadlock, by moving the call to schedule_delayed_work() outside of the timekeeper lock critical section. Reported-by: Gerlando Falauto <gerlando.falauto@keymile.com> Tested-by: Lin Ming <minggr@gmail.com> Signed-off-by: John Stultz <john.stultz@linaro.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: stable <stable@vger.kernel.org> #3.11, 3.10 Link: http://lkml.kernel.org/r/1378943457-27314-1-git-send-email-john.stultz@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-09-04Merge branch 'timers-nohz-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timers/nohz changes from Ingo Molnar: "It mostly contains fixes and full dynticks off-case optimizations, by Frederic Weisbecker" * 'timers-nohz-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits) nohz: Include local CPU in full dynticks global kick nohz: Optimize full dynticks's sched hooks with static keys nohz: Optimize full dynticks state checks with static keys nohz: Rename a few state variables vtime: Always debug check snapshot source _before_ updating it vtime: Always scale generic vtime accounting results vtime: Optimize full dynticks accounting off case with static keys vtime: Describe overriden functions in dedicated arch headers m68k: hardirq_count() only need preempt_mask.h hardirq: Split preempt count mask definitions context_tracking: Split low level state headers vtime: Fix racy cputime delta update vtime: Remove a few unneeded generic vtime state checks context_tracking: User/kernel broundary cross trace events context_tracking: Optimize context switch off case with static keys context_tracking: Optimize guest APIs off case with static key context_tracking: Optimize main APIs off case with static key context_tracking: Ground setup for static key use context_tracking: Remove full dynticks' hacky dependency on wide context tracking nohz: Only enable context tracking on full dynticks CPUs ...
2013-09-03Merge branch 'rcu/next' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu Pull RCU updates from Paul E. McKenney: " * Update RCU documentation. These were posted to LKML at https://lkml.org/lkml/2013/8/19/611. * Miscellaneous fixes. These were posted to LKML at https://lkml.org/lkml/2013/8/19/619. * Full-system idle detection. This is for use by Frederic Weisbecker's adaptive-ticks mechanism. Its purpose is to allow the timekeeping CPU to shut off its tick when all other CPUs are idle. These were posted to LKML at https://lkml.org/lkml/2013/8/19/648. * Improve rcutorture test coverage. These were posted to LKML at https://lkml.org/lkml/2013/8/19/675. " Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-08-31nohz_full: Add full-system-idle state machinePaul E. McKenney
This commit adds the state machine that takes the per-CPU idle data as input and produces a full-system-idle indication as output. This state machine is driven out of RCU's quiescent-state-forcing mechanism, which invokes rcu_sysidle_check_cpu() to collect per-CPU idle state and then rcu_sysidle_report() to drive the state machine. The full-system-idle state is sampled using rcu_sys_is_idle(), which also drives the state machine if RCU is idle (and does so by forcing RCU to become non-idle). This function returns true if all but the timekeeping CPU (tick_do_timer_cpu) are idle and have been idle long enough to avoid memory contention on the full_sysidle_state state variable. The rcu_sysidle_force_exit() may be called externally to reset the state machine back into non-idle state. For large systems the state machine is driven out of RCU's force-quiescent-state logic, which provides good scalability at the price of millisecond-scale latencies on the transition to full-system-idle state. This is not so good for battery-powered systems, which are usually small enough that they don't need to care about scalability, but which do care deeply about energy efficiency. Small systems therefore drive the state machine directly out of the idle-entry code. The number of CPUs in a "small" system is defined by a new NO_HZ_FULL_SYSIDLE_SMALL Kconfig parameter, which defaults to 8. Note that this is a build-time definition. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> [ paulmck: Use true and false for boolean constants per Lai Jiangshan. ] Reviewed-by: Josh Triplett <josh@joshtriplett.org> [ paulmck: Simplify logic and provide better comments for memory barriers, based on review comments and questions by Lai Jiangshan. ]
2013-08-28timer_list: correct the iterator for timer_listNathan Zimmer
Correct an issue with /proc/timer_list reported by Holger. When reading from the proc file with a sufficiently small buffer, 2k so not really that small, there was one could get hung trying to read the file a chunk at a time. The timer_list_start function failed to account for the possibility that the offset was adjusted outside the timer_list_next. Signed-off-by: Nathan Zimmer <nzimmer@sgi.com> Reported-by: Holger Hans Peter Freyther <holger@freyther.de> Cc: John Stultz <john.stultz@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Berke Durak <berke.durak@xiphos.com> Cc: Jeff Layton <jlayton@redhat.com> Tested-by: Al Viro <viro@zeniv.linux.org.uk> Cc: <stable@vger.kernel.org> # 3.10.x Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-08-19Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fixes from Ingo Molnar: "Three small fixlets" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: nohz: fix compile warning in tick_nohz_init() nohz: Do not warn about unstable tsc unless user uses nohz_full sched_clock: Fix integer overflow
2013-08-18nohz_full: Add Kconfig parameter for scalable detection of all-idle statePaul E. McKenney
At least one CPU must keep the scheduling-clock tick running for timekeeping purposes whenever there is a non-idle CPU. However, with the new nohz_full adaptive-idle machinery, it is difficult to distinguish between all CPUs really being idle as opposed to all non-idle CPUs being in adaptive-ticks mode. This commit therefore adds a Kconfig parameter as a first step towards enabling a scalable detection of full-system idle state. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> [ paulmck: Update help text per Frederic Weisbecker. ] Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2013-08-16nohz: Include local CPU in full dynticks global kickFrederic Weisbecker
tick_nohz_full_kick_all() is useful to notify all full dynticks CPUs that there is a system state change to checkout before re-evaluating the need for the tick. Unfortunately this is implemented using smp_call_function_many() that ignores the local CPU. This CPU also needs to re-evaluate the tick. on_each_cpu_mask() is not useful either because we don't want to re-evaluate the tick state in place but asynchronously from an IPI to avoid messing up with any random locking scenario. So lets call tick_nohz_full_kick() from tick_nohz_full_kick_all() so that the usual irq work takes care of it. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Kevin Hilman <khilman@linaro.org> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1375460996-16329-4-git-send-email-fweisbec@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-08-14Merge branch 'timers/nohz-v3' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks into timers/nohz Pull nohz improvements from Frederic Weisbecker: " It mostly contains fixes and full dynticks off-case optimizations. I believe that distros want to enable this feature so it seems important to optimize the case where the "nohz_full=" parameter is empty. ie: I'm trying to remove any performance regression that comes with NO_HZ_FULL=y when the feature is not used. This patchset improves the current situation a lot (off-case appears to be around 11% faster with hackbench, although I guess it may vary depending on the configuration but it should be significantly faster in any case) now there is still some work to do: I can still observe a remaining loss of 1.6% throughput seen with hackbench compared to CONFIG_NO_HZ_FULL=n. " Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-08-14nohz: Optimize full dynticks's sched hooks with static keysFrederic Weisbecker
Scheduler IPIs and task context switches are serious fast path. Let's try to hide as much as we can the impact of full dynticks APIs' off case that are called on these sites through the use of static keys. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Kevin Hilman <khilman@linaro.org>
2013-08-14nohz: Optimize full dynticks state checks with static keysFrederic Weisbecker
These APIs are frequenctly accessed and priority is given to optimize the full dynticks off-case in order to let distros enable this feature without suffering from significant performance regressions. Let's inline these APIs and optimize them with static keys. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Kevin Hilman <khilman@linaro.org>
2013-08-14nohz: Rename a few state variablesFrederic Weisbecker
Rename the full dynticks's cpumask and cpumask state variables to some more exportable names. These will be used later from global headers to optimize the main full dynticks APIs in conjunction with static keys. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Kevin Hilman <khilman@linaro.org>
2013-08-13context_tracking: Remove full dynticks' hacky dependency on wide context ↵Frederic Weisbecker
tracking Now that the full dynticks subsystem only enables the context tracking on full dynticks CPUs, lets remove the dependency on CONTEXT_TRACKING_FORCE This dependency was a hack to enable the context tracking widely for the full dynticks susbsystem until the latter becomes able to enable it in a more CPU-finegrained fashion. Now CONTEXT_TRACKING_FORCE only stands for testing on archs that work on support for the context tracking while full dynticks can't be used yet due to unmet dependencies. It simulates a system where all CPUs are full dynticks so that RCU user extended quiescent states and dynticks cputime accounting can be tested on the given arch. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Kevin Hilman <khilman@linaro.org>
2013-08-13nohz: Only enable context tracking on full dynticks CPUsFrederic Weisbecker
The context tracking subsystem has the ability to selectively enable the tracking on any defined subset of CPU. This means that we can define a CPU range that doesn't run the context tracking and another range that does. Now what we want in practice is to enable the tracking on full dynticks CPUs only. In order to perform this, we just need to pass our full dynticks CPU range selection from the full dynticks subsystem to the context tracking. This way we can spare the overhead of RCU user extended quiescent state and vtime maintainance on the CPUs that are outside the full dynticks range. Just keep in mind the raw context tracking itself is still necessary everywhere. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Kevin Hilman <khilman@linaro.org>
2013-08-12Merge branch 'fortglx/3.11/time' of ↵Ingo Molnar
git://git.linaro.org/people/jstultz/linux into timers/urgent Pull small fix for v3.11 from John Stultz. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-07-29Revert "cpuidle: Quickly notice prediction failure for repeat mode"Rafael J. Wysocki
Revert commit 69a37bea (cpuidle: Quickly notice prediction failure for repeat mode), because it has been identified as the source of a significant performance regression in v3.8 and later as explained by Jeremy Eder: We believe we've identified a particular commit to the cpuidle code that seems to be impacting performance of variety of workloads. The simplest way to reproduce is using netperf TCP_RR test, so we're using that, on a pair of Sandy Bridge based servers. We also have data from a large database setup where performance is also measurably/positively impacted, though that test data isn't easily share-able. Included below are test results from 3 test kernels: kernel reverts ----------------------------------------------------------- 1) vanilla upstream (no reverts) 2) perfteam2 reverts e11538d1f03914eb92af5a1a378375c05ae8520c 3) test reverts 69a37beabf1f0a6705c08e879bdd5d82ff6486c4 e11538d1f03914eb92af5a1a378375c05ae8520c In summary, netperf TCP_RR numbers improve by approximately 4% after reverting 69a37beabf1f0a6705c08e879bdd5d82ff6486c4. When 69a37beabf1f0a6705c08e879bdd5d82ff6486c4 is included, C0 residency never seems to get above 40%. Taking that patch out gets C0 near 100% quite often, and performance increases. The below data are histograms representing the %c0 residency @ 1-second sample rates (using turbostat), while under netperf test. - If you look at the first 4 histograms, you can see %c0 residency almost entirely in the 30,40% bin. - The last pair, which reverts 69a37beabf1f0a6705c08e879bdd5d82ff6486c4, shows %c0 in the 80,90,100% bins. Below each kernel name are netperf TCP_RR trans/s numbers for the particular kernel that can be disclosed publicly, comparing the 3 test kernels. We ran a 4th test with the vanilla kernel where we've also set /dev/cpu_dma_latency=0 to show overall impact boosting single-threaded TCP_RR performance over 11% above baseline. 3.10-rc2 vanilla RX + c0 lock (/dev/cpu_dma_latency=0): TCP_RR trans/s 54323.78 ----------------------------------------------------------- 3.10-rc2 vanilla RX (no reverts) TCP_RR trans/s 48192.47 Receiver %c0 0.0000 - 10.0000 [ 1]: * 10.0000 - 20.0000 [ 0]: 20.0000 - 30.0000 [ 0]: 30.0000 - 40.0000 [ 59]: *********************************************************** 40.0000 - 50.0000 [ 1]: * 50.0000 - 60.0000 [ 0]: 60.0000 - 70.0000 [ 0]: 70.0000 - 80.0000 [ 0]: 80.0000 - 90.0000 [ 0]: 90.0000 - 100.0000 [ 0]: Sender %c0 0.0000 - 10.0000 [ 1]: * 10.0000 - 20.0000 [ 0]: 20.0000 - 30.0000 [ 0]: 30.0000 - 40.0000 [ 11]: *********** 40.0000 - 50.0000 [ 49]: ************************************************* 50.0000 - 60.0000 [ 0]: 60.0000 - 70.0000 [ 0]: 70.0000 - 80.0000 [ 0]: 80.0000 - 90.0000 [ 0]: 90.0000 - 100.0000 [ 0]: ----------------------------------------------------------- 3.10-rc2 perfteam2 RX (reverts commit e11538d1f03914eb92af5a1a378375c05ae8520c) TCP_RR trans/s 49698.69 Receiver %c0 0.0000 - 10.0000 [ 1]: * 10.0000 - 20.0000 [ 1]: * 20.0000 - 30.0000 [ 0]: 30.0000 - 40.0000 [ 59]: *********************************************************** 40.0000 - 50.0000 [ 0]: 50.0000 - 60.0000 [ 0]: 60.0000 - 70.0000 [ 0]: 70.0000 - 80.0000 [ 0]: 80.0000 - 90.0000 [ 0]: 90.0000 - 100.0000 [ 0]: Sender %c0 0.0000 - 10.0000 [ 1]: * 10.0000 - 20.0000 [ 0]: 20.0000 - 30.0000 [ 0]: 30.0000 - 40.0000 [ 2]: ** 40.0000 - 50.0000 [ 58]: ********************************************************** 50.0000 - 60.0000 [ 0]: 60.0000 - 70.0000 [ 0]: 70.0000 - 80.0000 [ 0]: 80.0000 - 90.0000 [ 0]: 90.0000 - 100.0000 [ 0]: ----------------------------------------------------------- 3.10-rc2 test RX (reverts 69a37beabf1f0a6705c08e879bdd5d82ff6486c4 and e11538d1f03914eb92af5a1a378375c05ae8520c) TCP_RR trans/s 47766.95 Receiver %c0 0.0000 - 10.0000 [ 1]: * 10.0000 - 20.0000 [ 1]: * 20.0000 - 30.0000 [ 0]: 30.0000 - 40.0000 [ 27]: *************************** 40.0000 - 50.0000 [ 2]: ** 50.0000 - 60.0000 [ 0]: 60.0000 - 70.0000 [ 2]: ** 70.0000 - 80.0000 [ 0]: 80.0000 - 90.0000 [ 0]: 90.0000 - 100.0000 [ 28]: **************************** Sender: 0.0000 - 10.0000 [ 1]: * 10.0000 - 20.0000 [ 0]: 20.0000 - 30.0000 [ 0]: 30.0000 - 40.0000 [ 11]: *********** 40.0000 - 50.0000 [ 0]: 50.0000 - 60.0000 [ 1]: * 60.0000 - 70.0000 [ 0]: 70.0000 - 80.0000 [ 3]: *** 80.0000 - 90.0000 [ 7]: ******* 90.0000 - 100.0000 [ 38]: ************************************** These results demonstrate gaining back the tendency of the CPU to stay in more responsive, performant C-states (and thus yield measurably better performance), by reverting commit 69a37beabf1f0a6705c08e879bdd5d82ff6486c4. Requested-by: Jeremy Eder <jeder@redhat.com> Tested-by: Len Brown <len.brown@intel.com> Cc: 3.8+ <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-07-24nohz: fix compile warning in tick_nohz_init()Li Zhong
cpu is not used after commit 5b8621a68fdcd2baf1d3b413726f913a5254d46a Signed-off-by: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Kevin Hilman <khilman@linaro.org> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2013-07-24nohz: Do not warn about unstable tsc unless user uses nohz_fullSteven Rostedt
If the user enables CONFIG_NO_HZ_FULL and runs the kernel on a machine with an unstable TSC, it will produce a WARN_ON dump as well as taint the kernel. This is a bit extreme for a kernel that just enables a feature but doesn't use it. The warning should only happen if the user tries to use the feature by either adding nohz_full to the kernel command line, or by enabling CONFIG_NO_HZ_FULL_ALL that makes nohz used on all CPUs at boot up. Note, this second feature should not (yet) be used by distros or anyone that doesn't care if NO_HZ is used or not. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Kevin Hilman <khilman@linaro.org> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2013-07-22sched_clock: Fix integer overflowBaruch Siach
The expression '(1 << 32)' happens to evaluate as 0 on ARM, but it evaluates as 1 on xtensa and x86_64. This zeros sched_clock_mask, and breaks sched_clock(). Set the type of 1 to 'unsigned long long' to get the value we need. Reported-by: Max Filippov <jcmvbkbc@gmail.com> Tested-by: Max Filippov <jcmvbkbc@gmail.com> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: John Stultz <john.stultz@linaro.org>
2013-07-14kernel: delete __cpuinit usage from all core kernel filesPaul Gortmaker
The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. This removes all the uses of the __cpuinit macros from C files in the core kernel directories (kernel, init, lib, mm, and include) that don't really have a specific maintainer. [1] https://lkml.org/lkml/2013/5/20/589 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-07-12tick: broadcast: Check broadcast mode on CPU hotplugStephen Boyd
On ARM systems the dummy clockevent is registered with the cpu hotplug notifier chain before any other per-cpu clockevent. This has the side-effect of causing the dummy clockevent to be registered first in every hotplug sequence. Because the dummy is first, we'll try to turn the broadcast source on but the code in tick_device_uses_broadcast() assumes the broadcast source is in periodic mode and calls tick_broadcast_start_periodic() unconditionally. On boot this isn't a problem because we typically haven't switched into oneshot mode yet (if at all). During hotplug, if the broadcast source isn't in periodic mode we'll replace the broadcast oneshot handler with the broadcast periodic handler and start emulating oneshot mode when we shouldn't. Due to the way the broadcast oneshot handler programs the next_event it's possible for it to contain KTIME_MAX and cause us to hang the system when the periodic handler tries to program the next tick. Fix this by using the appropriate function to start the broadcast source. Reported-by: Stephen Warren <swarren@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Mark Rutland <Mark.Rutland@arm.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: ARM kernel mailing list <linux-arm-kernel@lists.infradead.org> Cc: John Stultz <john.stultz@linaro.org> Cc: Joseph Lo <josephl@nvidia.com> Link: http://lkml.kernel.org/r/20130711140059.GA27430@codeaurora.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-07-12Merge branch 'linus' into timers/urgentThomas Gleixner
Get upstream changes so we can apply fixes against them Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-07-10Merge branch 'timers/core' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks into timers/urgent Pull nohz updates/fixes from Frederic Weisbecker: ' Note that "watchdog: Boot-disable by default on full dynticks" is a temporary solution to solve the issue with the watchdog that prevents the tick from stopping. This is to make sure that 3.11 doesn't have that problem as several people complained about it. A proper and longer term solution has been proposed by Peterz: http://lkml.kernel.org/r/20130618103632.GO3204@twins.programming.kicks-ass.net ' Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-07-05clocksource: Reselect clocksource when watchdog validated high-res capabilityThomas Gleixner
Up to commit 5d33b883a (clocksource: Always verify highres capability) we had no sanity check when selecting a clocksource, which prevented that a non highres capable clocksource is used when the system already switched to highres/nohz mode. The new sanity check works as Alex and Tim found out. It prevents the TSC from being used. This happens because on x86 the boot process looks like this: tsc_start_freqency_validation(TSC); clocksource_register(HPET); clocksource_done_booting(); clocksource_select() Selects HPET which is valid for high-res switch_to_highres(); clocksource_register(TSC); TSC is not selected, because it is not yet flagged as VALID_HIGH_RES clocksource_watchdog() Validates TSC for highres, but that does not make TSC the current clocksource. Before the sanity check was added, we installed TSC unvalidated which worked most of the time. If the TSC was really detected as unstable, then the unstable logic removed it and installed HPET again. The sanity check is correct and needed. So the watchdog needs to kick a reselection of the clocksource, when it qualifies TSC as a valid high res clocksource. To solve this, we mark the clocksource which got the flag CLOCK_SOURCE_VALID_FOR_HRES set by the watchdog with an new flag CLOCK_SOURCE_RESELECT and trigger the watchdog thread. The watchdog thread evaluates the flag and invokes clocksource_select() when set. To avoid that the clocksource_done_booting() code, which is about to install the first real clocksource anyway, needs to go through clocksource_select and tick_oneshot_notify() pointlessly, split out the clocksource_watchdog_kthread() list walk code and invoke the select/notify only when called from clocksource_watchdog_kthread(). So clocksource_done_booting() can utilize the same splitout code without the select/notify invocation and the clocksource_mutex unlock/relock dance. Reported-and-tested-by: Alex Shi <alex.shi@intel.com> Cc: Hans Peter Anvin <hpa@linux.intel.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Andi Kleen <andi.kleen@intel.com> Tested-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Ingo Molnar <mingo@kernel.org> Cc: Davidlohr Bueso <davidlohr.bueso@hp.com> Cc: John Stultz <john.stultz@linaro.org> Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1307042239150.11637@ionos.tec.linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-07-04Merge branch 'timers/posix-cpu-timers-for-tglx' ofThomas Gleixner
git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks into timers/core Frederic sayed: "Most of these patches have been hanging around for several month now, in -mmotm for a significant chunk. They already missed a few releases." Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-07-02tick: Sanitize broadcast control logicThomas Gleixner
The recent implementation of a generic dummy timer resulted in a different registration order of per cpu local timers which made the broadcast control logic go belly up. If the dummy timer is the first clock event device which is registered for a CPU, then it is installed, the broadcast timer is initialized and the CPU is marked as broadcast target. If a real clock event device is installed after that, we can fail to take the CPU out of the broadcast mask. In the worst case we end up with two periodic timer events firing for the same CPU. One from the per cpu hardware device and one from the broadcast. Now the problem is that we have no way to distinguish whether the system is in a state which makes broadcasting necessary or the broadcast bit was set due to the nonfunctional dummy timer installment. To solve this we need to keep track of the system state seperately and provide a more detailed decision logic whether we keep the CPU in broadcast mode or not. The old decision logic only clears the broadcast mode, if the newly installed clock event device is not affected by power states. The new logic clears the broadcast mode if one of the following is true: - The new device is not affected by power states. - The system is not in a power state affected mode - The system has switched to oneshot mode. The oneshot broadcast is controlled from the deep idle state. The CPU is not in idle at this point, so it's safe to remove it from the mask. If we clear the broadcast bit for the CPU when a new device is installed, we also shutdown the broadcast device when this was the last CPU in the broadcast mask. If the broadcast bit is kept, then we leave the new device in shutdown state and rely on the broadcast to deliver the timer interrupts via the broadcast ipis. Reported-and-tested-by: Stehle Vincent-B46079 <B46079@freescale.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Cc: John Stultz <john.stultz@linaro.org>, Cc: Mark Rutland <mark.rutland@arm.com> Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1307012153060.4013@ionos.tec.linutronix.de Cc: stable@vger.kernel.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-07-02tick: Prevent uncontrolled switch to oneshot modeThomas Gleixner
When the system switches from periodic to oneshot mode, the broadcast logic causes a possibility that a CPU which has not yet switched to oneshot mode puts its own clock event device into oneshot mode without updating the state and the timer handler. CPU0 CPU1 per cpu tickdev is in periodic mode and switched to broadcast Switch to oneshot mode tick_broadcast_switch_to_oneshot() cpumask_copy(tick_oneshot_broacast_mask, tick_broadcast_mask); broadcast device mode = oneshot Timer interrupt irq_enter() tick_check_oneshot_broadcast() dev->set_mode(ONESHOT); tick_handle_periodic() if (dev->mode == ONESHOT) dev->next_event += period; FAIL. We fail, because dev->next_event contains KTIME_MAX, if the device was in periodic mode before the uncontrolled switch to oneshot happened. We must copy the broadcast bits over to the oneshot mask, because otherwise a CPU which relies on the broadcast would not been woken up anymore after the broadcast device switched to oneshot mode. So we need to verify in tick_check_oneshot_broadcast() whether the CPU has already switched to oneshot mode. If not, leave the device untouched and let the CPU switch controlled into oneshot mode. This is a long standing bug, which was never noticed, because the main user of the broadcast x86 cannot run into that scenario, AFAICT. The nonarchitected timer mess of ARM creates a gazillion of differently broken abominations which trigger the shortcomings of that broadcast code, which better had never been necessary in the first place. Reported-and-tested-by: Stehle Vincent-B46079 <B46079@freescale.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Cc: John Stultz <john.stultz@linaro.org>, Cc: Mark Rutland <mark.rutland@arm.com> Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1307012153060.4013@ionos.tec.linutronix.de Cc: stable@vger.kernel.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-07-02tick: Make oneshot broadcast robust vs. CPU offliningThomas Gleixner
In periodic mode we remove offline cpus from the broadcast propagation mask. In oneshot mode we fail to do so. This was not a problem so far, but the recent changes to the broadcast propagation introduced a constellation which can result in a NULL pointer dereference. What happens is: CPU0 CPU1 idle() arch_idle() tick_broadcast_oneshot_control(OFF); set cpu1 in tick_broadcast_force_mask if (cpu_offline()) arch_cpu_dead() cpu_dead_cleanup(cpu1) cpu1 tickdevice pointer = NULL broadcast interrupt dereference cpu1 tickdevice pointer -> OOPS We dereference the pointer because cpu1 is still set in tick_broadcast_force_mask and tick_do_broadcast() expects a valid cpumask and therefor lacks any further checks. Remove the cpu from the tick_broadcast_force_mask before we set the tick device pointer to NULL. Also add a sanity check to the oneshot broadcast function, so we can detect such issues w/o crashing the machine. Reported-by: Prarit Bhargava <prarit@redhat.com> Cc: athorlton@sgi.com Cc: CAI Qian <caiqian@redhat.com> Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1306261303260.4013@ionos.tec.linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-06-28timekeeping: Indicate that clock was set in the pvclock gtod notifierDavid Vrabel
If the clock was set (stepped), set the action parameter to functions in the pvclock gtod notifier chain to non-zero. This allows the callee to only do work if the clock was stepped. This will be used on Xen as the synchronization of the Xen wallclock to the control domain's (dom0) system time will be done with this notifier and updating on every timer tick is unnecessary and too expensive. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: John Stultz <john.stultz@linaro.org> Cc: <xen-devel@lists.xen.org> Link: http://lkml.kernel.org/r/1372329348-20841-4-git-send-email-david.vrabel@citrix.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-06-28timekeeping: Pass flags instead of multiple bools to timekeeping_update()David Vrabel
Instead of passing multiple bools to timekeeping_updated(), define flags and use a single 'action' parameter. It is then more obvious what each timekeeping_update() call does. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: John Stultz <john.stultz@linaro.org> Cc: <xen-devel@lists.xen.org> Link: http://lkml.kernel.org/r/1372329348-20841-3-git-send-email-david.vrabel@citrix.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-06-24clockevents: Prefer CPU local devices over global devicesStephen Boyd
On an SMP system with only one global clockevent and a dummy clockevent per CPU we run into problems. We want the dummy clockevents to be registered as the per CPU tick devices, but we can only achieve that if we register the dummy clockevents before the global clockevent or if we artificially inflate the rating of the dummy clockevents to be higher than the rating of the global clockevent. Failure to do so leads to boot hangs when the dummy timers are registered on all other CPUs besides the CPU that accepted the global clockevent as its tick device and there is no broadcast timer to poke the dummy devices. If we're registering multiple clockevents and one clockevent is global and the other is local to a particular CPU we should choose to use the local clockevent regardless of the rating of the device. This way, if the clockevent is a dummy it will take the tick device duty as long as there isn't a higher rated tick device and any global clockevent will be bumped out into broadcast mode, fixing the problem described above. Reported-and-tested-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Tested-by: soren.brinkmann@xilinx.com Cc: John Stultz <john.stultz@linaro.org> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Cc: John Stultz <john.stultz@linaro.org> Link: http://lkml.kernel.org/r/20130613183950.GA32061@codeaurora.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-06-21tick: Fix tick_broadcast_pending_mask not clearedDaniel Lezcano
The recent modification in the cpuidle framework consolidated the timer broadcast code across the different drivers by setting a new flag in the idle state. It tells the cpuidle core code to enter/exit the broadcast mode for the cpu when entering a deep idle state. The broadcast timer enter/exit is no longer handled by the back-end driver. This change made the local interrupt to be enabled *before* calling CLOCK_EVENT_NOTIFY_EXIT. On a tegra114, a four cores system, when the flag has been introduced in the driver, the following warning appeared: WARNING: at kernel/time/tick-broadcast.c:578 tick_broadcast_oneshot_control CPU: 2 PID: 0 Comm: swapper/2 Not tainted 3.10.0-rc3-next-20130529+ #15 [<c00667f8>] (tick_broadcast_oneshot_control+0x1a4/0x1d0) from [<c0065cd0>] (tick_notify+0x240/0x40c) [<c0065cd0>] (tick_notify+0x240/0x40c) from [<c0044724>] (notifier_call_chain+0x44/0x84) [<c0044724>] (notifier_call_chain+0x44/0x84) from [<c0044828>] (raw_notifier_call_chain+0x18/0x20) [<c0044828>] (raw_notifier_call_chain+0x18/0x20) from [<c00650cc>] (clockevents_notify+0x28/0x170) [<c00650cc>] (clockevents_notify+0x28/0x170) from [<c033f1f0>] (cpuidle_idle_call+0x11c/0x168) [<c033f1f0>] (cpuidle_idle_call+0x11c/0x168) from [<c000ea94>] (arch_cpu_idle+0x8/0x38) [<c000ea94>] (arch_cpu_idle+0x8/0x38) from [<c005ea80>] (cpu_startup_entry+0x60/0x134) [<c005ea80>] (cpu_startup_entry+0x60/0x134) from [<804fe9a4>] (0x804fe9a4) I don't have the hardware, so I wasn't able to reproduce the warning but after looking a while at the code, I deduced the following: 1. the CPU2 enters a deep idle state and sets the broadcast timer 2. the timer expires, the tick_handle_oneshot_broadcast function is called, setting the tick_broadcast_pending_mask and waking up the idle cpu CPU2 3. the CPU2 exits idle handles the interrupt and then invokes tick_broadcast_oneshot_control with CLOCK_EVENT_NOTIFY_EXIT which runs the following code: [...] if (dev->next_event.tv64 == KTIME_MAX) goto out; if (cpumask_test_and_clear_cpu(cpu, tick_broadcast_pending_mask)) goto out; [...] So if there is no next event scheduled for CPU2, we fulfil the first condition and jump out without clearing the tick_broadcast_pending_mask. 4. CPU2 goes to deep idle again and calls tick_broadcast_oneshot_control with CLOCK_NOTIFY_EVENT_ENTER but with the tick_broadcast_pending_mask set for CPU2, triggering the warning. The issue only surfaced due to the modifications of the cpuidle framework, which resulted in interrupts being enabled before the call to the clockevents code. If the call happens before interrupts have been enabled, the warning cannot trigger, because there is still the event pending which caused the broadcast timer expiry. Move the check for the next event below the check for the pending bit, so the pending bit gets cleared whether an event is scheduled on the cpu or not. [ tglx: Massaged changelog ] Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Reported-and-tested-by: Joseph Lo <josephl@nvidia.com> Cc: Stephen Warren <swarren@nvidia.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linaro-kernel@lists.linaro.org Link: http://lkml.kernel.org/r/1371485735-31249-1-git-send-email-daniel.lezcano@linaro.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-06-20nohz: Remove obsolete check for full dynticks CPUs to be RCU nocbsFrederic Weisbecker
Building full dynticks now implies that all CPUs are forced into RCU nocb mode through CONFIG_RCU_NOCB_CPU_ALL. The dynamic check has become useless. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Borislav Petkov <bp@alien8.de>
2013-06-20nohz: Warn if the machine can not perform nohz_fullSteven Rostedt
If the user configures NO_HZ_FULL and defines nohz_full=XXX on the kernel command line, or enables NO_HZ_FULL_ALL, but nohz fails due to the machine having a unstable clock, warn about it. We do not want users thinking that they are getting the benefit of nohz when their machine can not support it. Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2013-06-17ARM: sched_clock: Load cycle count after epoch stabilizesStephen Boyd
There is a small race between when the cycle count is read from the hardware and when the epoch stabilizes. Consider this scenario: CPU0 CPU1 ---- ---- cyc = read_sched_clock() cyc_to_sched_clock() update_sched_clock() ... cd.epoch_cyc = cyc; epoch_cyc = cd.epoch_cyc; ... epoch_ns + cyc_to_ns((cyc - epoch_cyc) The cyc on cpu0 was read before the epoch changed. But we calculate the nanoseconds based on the new epoch by subtracting the new epoch from the old cycle count. Since epoch is most likely larger than the old cycle count we calculate a large number that will be converted to nanoseconds and added to epoch_ns, causing time to jump forward too much. Fix this problem by reading the hardware after the epoch has stabilized. Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: John Stultz <john.stultz@linaro.org>
2013-06-12sched_clock: Make ARM's sched_clock generic for all architecturesStephen Boyd
Nothing about the sched_clock implementation in the ARM port is specific to the architecture. Generalize the code so that other architectures can use it by selecting GENERIC_SCHED_CLOCK. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> [jstultz: Merge minor collisions with other patches in my tree] Signed-off-by: John Stultz <john.stultz@linaro.org>
2013-06-12alarmtimer: Export symbols of functions declared in linux/alarmtimer.hMarcus Gelderie
Export symbols so they can be used by drivers/staging/android/alarm-dev.c if it is built as a module. So far alarm-dev is built-in but module support is planned (see drivers/staging/android/TODO). Signed-off-by: Marcus Gelderie <redmnic@gmail.com> [jstultz: tweaked commit message, also export newly added functions] Signed-off-by: John Stultz <john.stultz@linaro.org>
2013-05-31tick: Remove useless timekeeping duty attribution to broadcast sourceJiri Bohac
Since 7300711e ("clockevents: broadcast fixup possible waiters"), the timekeeping duty is assigned to the CPU that handles the tick broadcast clock device by the time it is set in one shot mode. This is an issue in full dynticks mode where the timekeeping duty must stay handled by the boot CPU for now. Otherwise it prevents secondary CPUs from offlining and this breaks suspend/shutdown/reboot/... As it appears there is no reason for this timekeeping duty to be moved to the broadcast CPU, besides nothing prevent it from being later re-assigned to another target, let's simply remove it. Signed-off-by: Jiri Bohac <jbohac@suse.cz> Reported-by: Steven Rostedt <rostedt@goodmis.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-05-31nohz: Fix notifier return val that enforce timekeepingLi Zhong
In tick_nohz_cpu_down_callback() if the cpu is the one handling timekeeping, we must return something that stops the CPU_DOWN_PREPARE notifiers and then start notify CPU_DOWN_FAILED on the already called notifier call backs. However traditional errno values are not handled by the notifier unless these are encapsulated using errno_to_notifier(). Hence the current -EINVAL is misinterpreted and converted to junk after notifier_to_errno(), leaving the notifier subsystem to random behaviour such as eventually allowing the cpu to go down. Fix this by using the standard NOTIFY_BAD instead. Signed-off-by: Li Zhong <zhong@linux.vnet.ibm.com> Reviewed-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-05-29power: Add option to log time spent in suspendColin Cross
Below is a patch from android kernel that maintains a histogram of suspend times. Please review and provide feedback. Statistices on the time spent in suspend are kept in /sys/kernel/debug/sleep_time. Cc: Android Kernel Team <kernel-team@android.com> Cc: Colin Cross <ccross@android.com> Cc: Todd Poynor <toddpoynor@google.com> Cc: San Mehat <san@google.com> Cc: Benoit Goby <benoit@android.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Colin Cross <ccross@android.com> Signed-off-by: Todd Poynor <toddpoynor@google.com> [zoran.markovic@linaro.org: Re-formatted suspend time table to better fit expected values. Moved accounting of suspend time into timekeeping core. Removed CONFIG_SUSPEND_TIME flag and made the feature conditional on CONFIG_DEBUG_FS. Changed the file name to sleep_time to better fit terminology in timekeeping core. Changed seq_printf to seq_puts. Tweaked commit message] Signed-off-by: Zoran Markovic <zoran.markovic@linaro.org> Signed-off-by: John Stultz <john.stultz@linaro.org>
2013-05-29alarmtimer: Add functions for timerfd supportTodd Poynor
Add functions needed for hooking up alarmtimer to timerfd: * alarm_restart: Similar to hrtimer_restart, restart an alarmtimer after the expires time has already been updated (as with alarm_forward). * alarm_forward_now: Similar to hrtimer_forward_now, move the expires time forward to an interval from the current time of the associated clock. * alarm_start_relative: Start an alarmtimer with an expires time relative to the current time of the associated clock. * alarm_expires_remaining: Similar to hrtimer_expires_remaining, return the amount of time remaining until alarm expiry. Signed-off-by: Todd Poynor <toddpoynor@google.com> Signed-off-by: John Stultz <john.stultz@linaro.org>
2013-05-29Merge branch 'fortglx/3.10/time' of ↵Thomas Gleixner
git://git.linaro.org/people/jstultz/linux into timers/urgent
2013-05-28timekeeping: Correct run-time detection of persistent_clock.Zoran Markovic
Since commit 31ade30692dc9680bfc95700d794818fa3f754ac, timekeeping_init() checks for presence of persistent clock by attempting to read a non-zero time value. This is an issue on platforms where persistent_clock (instead is implemented as a free-running counter (instead of an RTC) starting from zero on each boot and running during suspend. Examples are some ARM platforms (e.g. PandaBoard). An attempt to read such a clock during timekeeping_init() may return zero value and falsely declare persistent clock as missing. Additionally, in the above case suspend times may be accounted twice (once from timekeeping_resume() and once from rtc_resume()), resulting in a gradual drift of system time. This patch does a run-time correction of the issue by doing the same check during timekeeping_suspend(). A better long-term solution would have to return error when trying to read non-existing clock and zero when trying to read an uninitialized clock, but that would require changing all persistent_clock implementations. This patch addresses the immediate breakage, for now. Cc: John Stultz <john.stultz@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Feng Tang <feng.tang@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Zoran Markovic <zoran.markovic@linaro.org> [jstultz: Tweaked commit message and subject] Signed-off-by: John Stultz <john.stultz@linaro.org>
2013-05-28ntp: Remove unused variable flags in __hardppsGeert Uytterhoeven
kernel/time/ntp.c: In function ‘__hardpps’: kernel/time/ntp.c:877: warning: unused variable ‘flags’ commit a076b2146fabb0894cae5e0189a8ba3f1502d737 ("ntp: Remove ntp_lock, using the timekeeping locks to protect ntp state") removed its users, but not the actual variable. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: John Stultz <john.stultz@linaro.org>
2013-05-28clocksource: Implement clocksource_select_fallback() for ↵Thomas Gleixner
CONFIG_ARCH_USES_GETTIMEOFFSET=y commit 7eaeb34305 (clocksource: Provide unbind interface in sysfs) implemented clocksource_select_fallback() which is not defined for CONFIG_ARCH_USES_GETTIMEOFFSET=y. Add an empty inline function for that. Reported-by: Ingo Molnar <mingo@kernel.org> Reported-by: fengguang.wu@intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-05-28tick: Cure broadcast false positive pending bit warningThomas Gleixner
commit 26517f3e (tick: Avoid programming the local cpu timer if broadcast pending) added a warning if the cpu enters broadcast mode again while the pending bit is still set. Meelis reported that the warning triggers. There are two corner cases which have been not considered: 1) cpuidle calls clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER) twice. That can result in the following scenario CPU0 CPU1 cpuidle_idle_call() clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER) set cpu in tick_broadcast_oneshot_mask broadcast interrupt event expired for cpu1 set pending bit acpi_idle_enter_simple() clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER) WARN_ON(pending bit) Move the WARN_ON into the section where we enter broadcast mode so it wont provide false positives on the second call. 2) safe_halt() enables interrupts, so a broadcast interrupt can be delivered befor the broadcast mode is disabled. That sets the pending bit for the CPU which receives the broadcast interrupt. Though the interrupt is delivered right away from the broadcast handler and leaves the pending bit stale. Clear the pending bit for the current cpu in the broadcast handler. Reported-and-tested-by: Meelis Roos <mroos@linux.ee> Cc: Len Brown <lenb@kernel.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Rafael J. Wysocki <rjw@sisk.pl> Link: http://lkml.kernel.org/r/alpine.LFD.2.02.1305271841130.4220@ionos Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-05-28clockevents: Define CS_NAME_LEN unconditionallyThomas Gleixner
Unbreak architectures which do not use clockevents, but require to build some of the core timekeeping infrastructure Reported-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-05-16clockevents: Implement unbind functionalityThomas Gleixner
Provide a sysfs interface to allow unbinding of clockevent devices. The device is unbound if it is unused or if there is a replacement device available. Unbinding of broadcast devices is not supported as we don't want to foster that nonsense. If no replacement device is available the unbind returns -EBUSY. Unbind is available from the kernel and through sysfs, which is necessary to drop the module refcount. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: John Stultz <john.stultz@linaro.org> Cc: Magnus Damm <magnus.damm@gmail.com> Link: http://lkml.kernel.org/r/20130425143436.499216659@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-05-16clockevents: Split out selection logicThomas Gleixner
Split out the clockevent device selection logic. Preparatory patch to allow unbinding active clockevent devices. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: John Stultz <john.stultz@linaro.org> Cc: Magnus Damm <magnus.damm@gmail.com> Link: http://lkml.kernel.org/r/20130425143436.431796247@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>