summaryrefslogtreecommitdiff
path: root/tools/perf/util/symbol.c
AgeCommit message (Collapse)Author
2017-08-11perf record: Fix wrong size in perf_record_mmap for last kernel moduleThomas Richter
During work on perf report for s390 I ran into the following issue: 0 0x318 [0x78]: PERF_RECORD_MMAP -1/0: [0x3ff804d6990(0xfffffc007fb2966f) @ 0]: x /lib/modules/4.12.0perf1+/kernel/drivers/s390/net/qeth_l2.ko This is a PERF_RECORD_MMAP entry of the perf.data file with an invalid module size for qeth_l2.ko (the s390 ethernet device driver). Even a mainframe does not have 0xfffffc007fb2966f bytes of main memory. It turned out that this wrong size is created by the perf record command. What happens is this function call sequence from __cmd_record(): perf_session__new(): perf_session__create_kernel_maps(): machine__create_kernel_maps(): machine__create_modules(): Creates map for all loaded kernel modules. modules__parse(): Reads /proc/modules and extracts module name and load address (1st and last column) machine__create_module(): Called for every module found in /proc/modules. Creates a new map for every module found and enters module name and start address into the map. Since the module end address is unknown it is set to zero. This ends up with a kernel module map list sorted by module start addresses. All module end addresses are zero. Last machine__create_kernel_maps() calls function map_groups__fixup_end(). This function iterates through the maps and assigns each map entry's end address the successor map entry start address. The last entry of the map group has no successor, so ~0 is used as end to consume the remaining memory. Later __cmd_record calls function record__synthesize() which in turn calls perf_event__synthesize_kernel_mmap() and perf_event__synthesize_modules() to create PERF_REPORT_MMAP entries into the perf.data file. On s390 this results in the last module qeth_l2.ko (which has highest start address, see module table: [root@s8360047 perf]# cat /proc/modules qeth_l2 86016 1 - Live 0x000003ff804d6000 qeth 266240 1 qeth_l2, Live 0x000003ff80296000 ccwgroup 24576 1 qeth, Live 0x000003ff80218000 vmur 36864 0 - Live 0x000003ff80182000 qdio 143360 2 qeth_l2,qeth, Live 0x000003ff80002000 [root@s8360047 perf]# ) to be the last entry and its map has an end address of ~0. When the PERF_RECORD_MMAP entry is created for kernel module qeth_l2.ko its start address and length is written. The length is calculated in line: event->mmap.len = pos->end - pos->start; and results in 0xffffffffffffffff - 0x3ff804d6990(*) = 0xfffffc007fb2966f (*) On s390 the module start address is actually determined by a __weak function named arch__fix_module_text_start() in machine__create_module(). I think this improvable. We can use the module size (2nd column of /proc/modules) to get each loaded kernel module size and calculate its end address. Only for map entries which do not have a valid end address (end is still zero) we can use the heuristic we have now, that is use successor start address or ~0. Signed-off-by: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com> Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com> Cc: Zvonko Kosic <zvonko.kosic@de.ibm.com> LPU-Reference: 20170803134902.47207-2-tmricht@linux.vnet.ibm.com Link: http://lkml.kernel.org/n/tip-nmoqij5b5vxx7rq2ckwu8iaj@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-07-18perf buildid-cache: Cache debuginfoKrister Johansen
If a stripped binary is placed in the cache, the user is in a situation where there's a cached elf file present, but it doesn't have any symtab to use for name resolution. Grab the debuginfo for binaries that don't end in .ko. This yields a better chance of resolving symbols from older traces. Signed-off-by: Krister Johansen <kjlx@templeofstupid.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1499305693-1599-7-git-send-email-kjlx@templeofstupid.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-07-18perf buildid-cache: Support binary objects from other namespacesKrister Johansen
Teach buildid-cache how to add, remove, and update binary objects from other mount namespaces. Allow probe events tracing binaries in different namespaces to add their objects to the probe and build-id caches too. As a handy side effect, this also lets us access SDT probes in binaries from alternate mount namespaces. Signed-off-by: Krister Johansen <kjlx@templeofstupid.com> Tested-by: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1499305693-1599-5-git-send-email-kjlx@templeofstupid.com [ Add util/namespaces.c to tools/perf/util/python-ext-sources, to fix the python binding 'perf test' ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-07-18perf maps: Lookup maps in both intitial mountns and inner mountns.Krister Johansen
If a process is in a mountns and has symbols in /tmp/perf-<pid>.map, look first in the namespace using the tgid for the pidns that the process might be in. If the map isn't found there, try looking in the mountns where perf is running, and use the tgid that's appropriate for perf's pid namespace. If all else fails, use the original pid. This allows us to locate a symbol map file in the mount namespace, if it was generated there. However, we also try the tool's /tmp in case it's there instead. Signed-off-by: Krister Johansen <kjlx@templeofstupid.com> Tested-by: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1499305693-1599-3-git-send-email-kjlx@templeofstupid.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-07-18perf symbols: Find symbols in different mount namespaceKrister Johansen
Teach perf how to resolve symbols from binaries that are in a different mount namespace from the tool. This allows perf to generate meaningful stack traces even if the binary resides in a different mount namespace from the tool. Signed-off-by: Krister Johansen <kjlx@templeofstupid.com> Tested-by: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1499305693-1599-2-git-send-email-kjlx@templeofstupid.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-06-08perf symbols: Kill dso__build_id_is_kmod()Namhyung Kim
The commit e7ee40475760 ("perf symbols: Fix symbols searching for module in buildid-cache") added the function to check kernel modules reside in the build-id cache. This was because there's no way to identify a DSO which is actually a kernel module. So it searched linkname of the file and find ".ko" suffix. But this does not work for compressed kernel modules and now such DSOs hCcave correct symtab_type now. So no need to check it anymore. This patch essentially reverts the commit. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Wang Nan <wangnan0@huawei.com> Cc: kernel-team@lge.com Link: http://lkml.kernel.org/r/20170608073109.30699-10-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-05-02perf symbols: Allow user probes on versioned symbolsPaul Clarke
Symbol versioning, as in glibc, results in symbols being defined as: <real symbol>@[@]<version> (Note that "@@" identifies a default symbol, if the symbol name is repeated.) perf is currently unable to deal with this, and is unable to create user probes at such symbols: -- $ nm /lib/powerpc64le-linux-gnu/libpthread.so.0 | grep pthread_create 0000000000008d30 t __pthread_create_2_1 0000000000008d30 T pthread_create@@GLIBC_2.17 $ /usr/bin/sudo perf probe -v -x /lib/powerpc64le-linux-gnu/libpthread.so.0 pthread_create probe-definition(0): pthread_create symbol:pthread_create file:(null) line:0 offset:0 return:0 lazy:(null) 0 arguments Open Debuginfo file: /usr/lib/debug/lib/powerpc64le-linux-gnu/libpthread-2.19.so Try to find probe point from debuginfo. Probe point 'pthread_create' not found. Error: Failed to add events. Reason: No such file or directory (Code: -2) -- One is not able to specify the fully versioned symbol, either, due to syntactic conflicts with other uses of "@" by perf: -- $ /usr/bin/sudo perf probe -v -x /lib/powerpc64le-linux-gnu/libpthread.so.0 pthread_create@@GLIBC_2.17 probe-definition(0): pthread_create@@GLIBC_2.17 Semantic error :SRC@SRC is not allowed. 0 arguments Error: Command Parse Error. Reason: Invalid argument (Code: -22) -- This patch ignores versioning for default symbols, thus allowing probes to be created for these symbols: -- $ /usr/bin/sudo ./perf probe -x /lib/powerpc64le-linux-gnu/libpthread.so.0 pthread_create Added new event: probe_libpthread:pthread_create (on pthread_create in /lib/powerpc64le-linux-gnu/libpthread-2.19.so) You can now use it in all perf tools, such as: perf record -e probe_libpthread:pthread_create -aR sleep 1 $ /usr/bin/sudo ./perf record -e probe_libpthread:pthread_create -aR ./test 2 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.052 MB perf.data (2 samples) ] $ /usr/bin/sudo ./perf script test 2915 [000] 19124.260729: probe_libpthread:pthread_create: (3fff99248d38) test 2916 [000] 19124.260962: probe_libpthread:pthread_create: (3fff99248d38) $ /usr/bin/sudo ./perf probe --del=probe_libpthread:pthread_create Removed event: probe_libpthread:pthread_create -- Committer note: Change the variable storing the result of strlen() to 'int', to fix the build on debian:experimental-x-mipsel, fedora:24-x-ARC-uClibc, ubuntu:16.04-x-arm, etc: util/symbol.c: In function 'symbol__match_symbol_name': util/symbol.c:422:11: error: comparison between signed and unsigned integer expressions [-Werror=sign-compare] if (len < versioning - name) ^ Signed-off-by: Paul A. Clarke <pc@us.ibm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: David Ahern <dsahern@gmail.com> Link: http://lkml.kernel.org/r/c2b18d9c-17f8-9285-4868-f58b6359ccac@us.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-05-02perf symbols: Accept symbols starting at address 0Arnaldo Carvalho de Melo
That is the case of _text on s390, and we have some functions that return an address, using address zero to report problems, oops. This would lead the symbol loading routines to not use "_text" as the reference relocation symbol, or the first symbol for the kernel, but use instead "_stext", that is at the same address on x86_64 and others, but not on s390: [acme@localhost perf-4.11.0-rc6]$ head -15 /proc/kallsyms 0000000000000000 T _text 0000000000000418 t iplstart 0000000000000800 T start 000000000000080a t .base 000000000000082e t .sk8x8 0000000000000834 t .gotr 0000000000000842 t .cmd 0000000000000846 t .parm 000000000000084a t .lowcase 0000000000010000 T startup 0000000000010010 T startup_kdump 0000000000010214 t startup_kdump_relocated 0000000000011000 T startup_continue 00000000000112a0 T _ehead 0000000000100000 T _stext [acme@localhost perf-4.11.0-rc6]$ Which in turn would make 'perf test vmlinux' to fail because it wouldn't find the symbols before "_stext" in kallsyms. Fix it by using the return value only for errors and storing the address, when the symbol is successfully found, in a provided pointer arg. Before this patch: After: [acme@localhost perf-4.11.0-rc6]$ tools/perf/perf test -v 1 1: vmlinux symtab matches kallsyms : --- start --- test child forked, pid 40693 Looking at the vmlinux_path (8 entries long) Using /usr/lib/debug/lib/modules/3.10.0-654.el7.s390x/vmlinux for symbols ERR : 0: _text not on kallsyms ERR : 0x418: iplstart not on kallsyms ERR : 0x800: start not on kallsyms ERR : 0x80a: .base not on kallsyms ERR : 0x82e: .sk8x8 not on kallsyms ERR : 0x834: .gotr not on kallsyms ERR : 0x842: .cmd not on kallsyms ERR : 0x846: .parm not on kallsyms ERR : 0x84a: .lowcase not on kallsyms ERR : 0x10000: startup not on kallsyms ERR : 0x10010: startup_kdump not on kallsyms ERR : 0x10214: startup_kdump_relocated not on kallsyms ERR : 0x11000: startup_continue not on kallsyms ERR : 0x112a0: _ehead not on kallsyms <SNIP warnings> test child finished with -1 ---- end ---- vmlinux symtab matches kallsyms: FAILED! [acme@localhost perf-4.11.0-rc6]$ After: [acme@localhost perf-4.11.0-rc6]$ tools/perf/perf test -v 1 1: vmlinux symtab matches kallsyms : --- start --- test child forked, pid 47160 <SNIP warnings> test child finished with 0 ---- end ---- vmlinux symtab matches kallsyms: Ok [acme@localhost perf-4.11.0-rc6]$ Reported-by: Michael Petlan <mpetlan@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-9x9bwgd3btwdk1u51xie93fz@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-19perf tools: Move path related functions to util/path.hArnaldo Carvalho de Melo
Disentangling util.h header mess a bit more. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-aj6je8ly377i4upedmjzdsq6@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-19perf tools: Move sane ctype stuff from util.h to sane_ctype.hArnaldo Carvalho de Melo
More stuff that came from git, out of the hodge-podge that is util.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-e3lana4gctz3ub4hn4y29hkw@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-19perf tools: Add include <linux/kernel.h> where ARRAY_SIZE() is usedArnaldo Carvalho de Melo
To pave the way for further cleanups where linux/kernel.h may stop being included in some header. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-qqxan6tfsl6qx3l0v3nwgjvk@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-17perf symbols: Fix symbols__fixup_end heuristic for corner casesDaniel Borkmann
The current symbols__fixup_end() heuristic for the last entry in the rb tree is suboptimal as it leads to not being able to recognize the symbol in the call graph in a couple of corner cases, for example: i) If the symbol has a start address (f.e. exposed via kallsyms) that is at a page boundary, then the roundup(curr->start, 4096) for the last entry will result in curr->start == curr->end with a symbol length of zero. ii) If the symbol has a start address that is shortly before a page boundary, then also here, curr->end - curr->start will just be very few bytes, where it's unrealistic that we could perform a match against. Instead, change the heuristic to roundup(curr->start, 4096) + 4096, so that we can catch such corner cases and have a better chance to find that specific symbol. It's still just best effort as the real end of the symbol is unknown to us (and could even be at a larger offset than the current range), but better than the current situation. Alexei reported that he recently run into case i) with a JITed eBPF program (these are all page aligned) as the last symbol which wasn't properly shown in the call graph (while other eBPF program symbols in the rb tree were displayed correctly). Since this is a generic issue, lets try to improve the heuristic a bit. Reported-and-Tested-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Fixes: 2e538c4a1847 ("perf tools: Improve kernel/modules symbol lookup") Link: http://lkml.kernel.org/r/bb5c80d27743be6f12afc68405f1956a330e1bc9.1489614365.git.daniel@iogearbox.net Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-02-08perf symbols: Take into account symfs setting when reading file build IDVictor Kamensky
After commit 5baecbcd9c9a ("perf symbols: we can now read separate debug-info files based on a build ID") and when --symfs option is used perf failed to pick up symbols for file with the same name between host and sysroot specified by --symfs option. One can see message like this: bin/bash with build id 26f0062cb6950d4d1ab0fd9c43eae8b10ca42062 not found, continuing without symbols It happens because code added by 5baecbcd9c9a opens files directly by dso->long_name without symbol_conf.symfs consideration, which as result picks one from the host. It reads its build ID and later even code finds another proper file in directory pointed by --symfs perf ignores it because build id mismatches. Fix is to use __symbol__join_symfs to adjust file name according to --symfs setting. If no --symfs passed the operation would noop and picks the same host file as before. Also note in latter tree after 5baecbcd9c9a commit additional check for '!dso->has_build_id' was added, so to observe error condition 'perf record' should run with --no-buildid, so perf.data itself would not have build id for target binary in buildid perf section and 'perf report' will pass '!dso->has_build_id' condition. Or target binary should not have build id, but the same binary on host has build id, again '!dso->has_build_id' will pass in this case and incorrect build id could be read if --symfs is used. Signed-off-by: Victor Kamensky <kamensky@cisco.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Chris Phlipot <cphlipot0@gmail.com> Cc: Dima Kogan <dima@secretsauce.net> Cc: He Kuang <hekuang@huawei.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wang Nan <wangnan0@huawei.com> Cc: xe-linux-external@cisco.com Fixes: 5baecbcd9c9a ("perf symbols: we can now read separate debug-info files based on a build ID") Link: http://lkml.kernel.org/r/1486424908-17094-1-git-send-email-kamensky@cisco.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-20perf diff: Do not overwrite valid build idKan Liang
Fixes a perf diff regression issue which was introduced by commit 5baecbcd9c9a ("perf symbols: we can now read separate debug-info files based on a build ID") The binary name could be same when perf diff different binaries. Build id is used to distinguish between them. However, the previous patch assumes the same binary name has same build id. So it overwrites the build id according to the binary name, regardless of whether the build id is set or not. Check the has_build_id in dso__load. If the build id is already set, use it. Before the fix: $ perf diff 1.perf.data 2.perf.data # Event 'cycles' # # Baseline Delta Shared Object Symbol # ........ ....... ................ ............................. # 99.83% -99.80% tchain_edit [.] f2 0.12% +99.81% tchain_edit [.] f3 0.02% -0.01% [ixgbe] [k] ixgbe_read_reg After the fix: $ perf diff 1.perf.data 2.perf.data # Event 'cycles' # # Baseline Delta Shared Object Symbol # ........ ....... ................ ............................. # 99.83% +0.10% tchain_edit [.] f3 0.12% -0.08% tchain_edit [.] f2 Signed-off-by: Kan Liang <kan.liang@intel.com> Cc: Andi Kleen <andi@firstfloor.org> CC: Dima Kogan <dima@secretsauce.net> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Fixes: 5baecbcd9c9a ("perf symbols: we can now read separate debug-info files based on a build ID") Link: http://lkml.kernel.org/r/1481642984-13593-1-git-send-email-kan.liang@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-29perf script: Add option to stop printing callchainDavid Ahern
Allow user to specify list of symbols which cause the dump of callchains to stop at that symbol. Committer notes: Testing it: # perf record -ag usleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 1.177 MB perf.data (33 samples) ] # # # Without it: # # perf script swapper 0 [000] 9693.370039: 1 cycles:ppp: 2072ad x86_pmu_enable (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a29d7 perf_pmu_enable.part.90 (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a713a ctx_resched (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a76c1 __perf_event_enable (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a0390 event_function (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a1cff remote_function (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 326978 flush_smp_call_function_queue (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 327413 generic_smp_call_function_single_interrupt (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 249b37 smp_call_function_single_interrupt (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) a04b2c call_function_single_interrupt (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 889427 cpuidle_enter (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 2e534a call_cpuidle (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 2e5730 cpu_startup_entry (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 9f5167 rest_init (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 137ffeb start_kernel ([kernel.vmlinux].init.text) 137f2ca x86_64_start_reservations ([kernel.vmlinux].init.text) 137f419 x86_64_start_kernel ([kernel.vmlinux].init.text) swapper 0 [000] 9693.370044: 1 cycles:ppp: 20ca1b intel_pmu_handle_irq (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 205b0c perf_event_nmi_handler (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 22a14a nmi_handle (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 22a6b3 default_do_nmi (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 22a83c do_nmi (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) a03fb1 end_repeat_nmi (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a29d7 perf_pmu_enable.part.90 (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a713a ctx_resched (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a76c1 __perf_event_enable (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a0390 event_function (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a1cff remote_function (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 326978 flush_smp_call_function_queue (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 327413 generic_smp_call_function_single_interrupt (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 249b37 smp_call_function_single_interrupt (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) a04b2c call_function_single_interrupt (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 889427 cpuidle_enter (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 2e534a call_cpuidle (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 2e5730 cpu_startup_entry (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 9f5167 rest_init (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 137ffeb start_kernel ([kernel.vmlinux].init.text) 137f2ca x86_64_start_reservations ([kernel.vmlinux].init.text) # # # Using it to see just what are the calls from the 'remote_function' function: # # perf script --stop-bt remote_function swapper 0 [000] 9693.370039: 1 cycles:ppp: 2072ad x86_pmu_enable (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a29d7 perf_pmu_enable.part.90 (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a713a ctx_resched (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a76c1 __perf_event_enable (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a0390 event_function (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a1cff remote_function (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) swapper 0 [000] 9693.370044: 1 cycles:ppp: 20ca1b intel_pmu_handle_irq (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 205b0c perf_event_nmi_handler (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 22a14a nmi_handle (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 22a6b3 default_do_nmi (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 22a83c do_nmi (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) a03fb1 end_repeat_nmi (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a29d7 perf_pmu_enable.part.90 (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a713a ctx_resched (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a76c1 __perf_event_enable (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a0390 event_function (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) 3a1cff remote_function (/usr/lib/debug/lib/modules/4.8.8-300.fc25.x86_64/vmlinux) Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1480104021-36275-1-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-11-25perf record: Fix segfault when running with suid and kptr_restrict is 1Wang Nan
Before this patch perf panics if kptr_restrict is set to 1 and perf is owned by root with suid set: $ whoami wangnan $ ls -l ./perf -rwsr-xr-x 1 root root 19781908 Sep 21 19:29 /home/wangnan/perf $ cat /proc/sys/kernel/kptr_restrict 1 $ cat /proc/sys/kernel/perf_event_paranoid -1 $ ./perf record -a Segmentation fault (core dumped) $ The reason is that perf assumes it is allowed to read kptr from /proc/kallsyms when euid is root, but in fact the kernel doesn't allow reading kptr when euid and uid do not match with each other: $ cp /bin/cat . $ sudo chown root:root ./cat $ sudo chmod u+s ./cat $ cat /proc/kallsyms | grep do_fork 0000000000000000 T _do_fork <--- kptr is hidden even euid is root $ sudo cat /proc/kallsyms | grep do_fork ffffffff81080230 T _do_fork See lib/vsprintf.c for kernel side code. This patch fixes this problem by checking both uid and euid. Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexei Starovoitov <ast@fb.com> Cc: He Kuang <hekuang@huawei.com> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/20161115040617.69788-3-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-29perf symbols: Add dso__last_symbol()Adrian Hunter
Add a function to find the last symbol in a DSO. This will be used when parsing address filters to calculate a region that includes the entire DSO. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Link: http://lkml.kernel.org/r/1474641528-18776-7-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-05perf symbols: Remove symbol_filter_t machineryArnaldo Carvalho de Melo
We're not using it anymore, few users were, but we really could do without it, simplify lots of functions by removing it. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-1zng8wdznn00iiz08bb7q3vn@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-05perf symbols: Mark if a symbol is idle in the libraryArnaldo Carvalho de Melo
This was being done just in 'perf top', but grouping idle symbols should be useful in other places as well, so remove one more symbol_filter_t user by moving this to the symbol library. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-5r7xitjkzjr9jak1zy3d8u5l@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-01perf symbols: Fixup symbol sizes before picking best onesArnaldo Carvalho de Melo
When we call symbol__fixup_duplicate() we use algorithms to pick the "best" symbols for cases where there are various functions/aliases to an address, and those check zero size symbols, which, before calling symbol__fixup_end() are _all_ symbols in a just parsed kallsyms file. So first fixup the end, then fixup the duplicates. Found while trying to figure out why 'perf test vmlinux' failed, see the output of 'perf test -v vmlinux' to see cases where the symbols picked as best for vmlinux don't match the ones picked for kallsyms. Cc: Anton Blanchard <anton@samba.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Fixes: 694bf407b061 ("perf symbols: Add some heuristics for choosing the best duplicate symbol") Link: http://lkml.kernel.org/n/tip-rxqvdgr0mqjdxee0kf8i2ufn@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-09-01perf symbols: Check symbol_conf.allow_aliases for kallsyms loading tooArnaldo Carvalho de Melo
We can allow aliases to be kept, but we were checking this just when loading vmlinux files, be consistent, do it for any symbol table loading code that calls symbol__fixup_duplicate() by making this function check .allow_aliases instead. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Fixes: 680d926a8cb0 ("perf symbols: Allow symbol alias when loading map for symbol name") Link: http://lkml.kernel.org/n/tip-z0avp0s6cfjckc4xj3pdfjdz@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-08-30perf annotate: Initialize the priv are in symbol__new()Arnaldo Carvalho de Melo
We need to initializa some fields (right now just a mutex) when we allocate the per symbol annotation struct, so do it at the symbol constructor instead of (ab)using the filter mechanism for that. This way we remove one of the few cases we have for that symbol filter, which will eventually led to removing it. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-cvz34avlz1lez888lob95390@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-28perf symbols: Use proper dso name for is_regular_fileJiri Olsa
Marc reported use of uninitialized memory: > In commit "403567217d3f perf symbols: Do not read symbols/data from > device files" a check to uninitialzied memory was added. This leads to > the following valgrind output: > > ==24515== Syscall param stat(file_name) points to uninitialised byte(s) > ==24515== at 0x75B26D5: _xstat (in /lib/x86_64-linux-gnu/libc-2.22.so) > ==24515== by 0x4E548D: stat (stat.h:454) > ==24515== by 0x4E548D: is_regular_file (util.c:687) > ==24515== by 0x4A5BEE: dso__load (symbol.c:1435) > ==24515== by 0x4BB1AE: map__load (map.c:289) > ==24515== by 0x4BB1AE: map__find_symbol (map.c:333) > ==24515== by 0x4835B3: thread__find_addr_location (event.c:1300) > ==24515== by 0x4B5342: add_callchain_ip (machine.c:1652) > ==24515== by 0x4B5342: thread__resolve_callchain_sample (machine.c:1906) > ==24515== by 0x4B9E7D: thread__resolve_callchain (machine.c:1958) > ==24515== by 0x441B3E: process_event (builtin-script.c:795) > ==24515== by 0x441B3E: process_sample_event (builtin-script.c:920) > ==24515== by 0x4BEE29: perf_evlist__deliver_sample (session.c:1192) > ==24515== by 0x4BEE29: machines__deliver_event (session.c:1229) > ==24515== by 0x4BF770: perf_session__deliver_event (session.c:1286) > ==24515== by 0x4BF770: ordered_events__deliver_event (session.c:114) > ==24515== by 0x4C1D17: __ordered_events__flush (ordered-events.c:207) > ==24515== by 0x4C1D17: ordered_events__flush.part.3 (ordered-events.c:274) > ==24515== by 0x4BF44C: perf_session__process_user_event (session.c:1325) > ==24515== by 0x4BF44C: perf_session__process_event (session.c:1451) > ==24515== Address 0x807c6a0 is 0 bytes inside a block of size 4,096 alloc'd > ==24515== at 0x4C29C0F: malloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so) > ==24515== by 0x4A5BCB: dso__load (symbol.c:1421) > ==24515== by 0x4BB1AE: map__load (map.c:289) > ==24515== by 0x4BB1AE: map__find_symbol (map.c:333) > ==24515== by 0x4835B3: thread__find_addr_location (event.c:1300) > ==24515== by 0x4B5342: add_callchain_ip (machine.c:1652) > ==24515== by 0x4B5342: thread__resolve_callchain_sample (machine.c:1906) > ==24515== by 0x4B9E7D: thread__resolve_callchain (machine.c:1958) > ==24515== by 0x441B3E: process_event (builtin-script.c:795) > ==24515== by 0x441B3E: process_sample_event (builtin-script.c:920) > ==24515== by 0x4BEE29: perf_evlist__deliver_sample (session.c:1192) > ==24515== by 0x4BEE29: machines__deliver_event (session.c:1229) > ==24515== by 0x4BF770: perf_session__deliver_event (session.c:1286) > ==24515== by 0x4BF770: ordered_events__deliver_event (session.c:114) > ==24515== by 0x4C1D17: __ordered_events__flush (ordered-events.c:207) > ==24515== by 0x4C1D17: ordered_events__flush.part.3 (ordered-events.c:274) > ==24515== by 0x4BF44C: perf_session__process_user_event (session.c:1325) > ==24515== by 0x4BF44C: perf_session__process_event (session.c:1451) > ==24515== by 0x4C0EAC: __perf_session__process_events (session.c:1804) > ==24515== by 0x4C0EAC: perf_session__process_events (session.c:1858) The reason was a typo that passed global 'name' variable as the is_regular_file argument instead dso->long_name. Reported-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Wang Nan <wangnan0@huawei.com> Fixes: 403567217d3f ("perf symbols: Do not read symbols/data from device files") Link: http://lkml.kernel.org/r/1466772025-17471-2-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-23perf tools: Rename strlist_for_each() macros to for_each_entry()Arnaldo Carvalho de Melo
To match the semantics for list.h in the kernel, that are the interface we use in them. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Milian Wolff <milian.wolff@kdab.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Taeung Song <treeze.taeung@gmail.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-0b5i2ki9c3di6706fxpticsb@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-05-30perf buildid-cache: Use path/to/bin/buildid/elf instead of path/to/bin/buildidMasami Hiramatsu
Use path/to/bin/buildid/elf instead of path/to/bin/buildid to store corresponding elf binary. This also stores vdso in buildid/vdso, kallsyms in buildid/kallsyms. Note that the existing caches are not updated until user adds or updates the cache. Anyway, if there is the old style build-id cache it falls back to use it. (IOW, it is backward compatible) Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Hemant Kumar <hemant@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20160528151537.16098.85815.stgit@devbox Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-05-30perf symbols: Cleanup the code flow of dso__find_kallsymsMasami Hiramatsu
Cleanup the code flow of dso__find_kallsyms() to remove redundant checking code and add some comment for readability. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Hemant Kumar <hemant@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20160528151522.16098.43446.stgit@devbox Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-05-30perf symbols: Introduce filename__readable to check readabilityMasami Hiramatsu
Introduce filename__readable to check readability by opening the file directly. Since the access(R_OK) just checks the readability based on real UID/GID, it is ignored that the effective UID/GID and capabilities for some special file (e.g. /proc/kcore). filename__readable() directly opens given file with O_RDONLY so that the kernel checks it by effective UID/GID and capabilities. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Hemant Kumar <hemant@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20160528151513.16098.97576.stgit@devbox Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-05-27perf symbols: Check kptr_restrict for rootWang Nan
If kptr_restrict is set to 2, even root is not allowed to see pointers. This patch checks kptr_restrict even if euid == 0. For root, report error if kptr_restrict is 2. Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1464081688-167940-1-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-05-20perf tools: Set buildid dir under symfs when --symfs is providedHe Kuang
This patch moves the reference of buildid dir to 'symfs/.debug' and skips the local buildid dir when '--symfs' is given, so that every single file opened by perf is relative to symfs directory now. Signed-off-by: He Kuang <hekuang@huawei.com> Acked-by: David Ahern <dsahern@gmail.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ekaterina Tumanova <tumanova@linux.vnet.ibm.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1463658462-85131-2-git-send-email-hekuang@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-05-16perf symbols: Introduce DSO__NAME_KALLSYMS and DSO__NAME_KCOREMasami Hiramatsu
Instead of using a raw string, use DSO__NAME_KALLSYMS and DSO__NAME_KCORE macros for kallsyms and kcore. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Hemant Kumar <hemant@linux.vnet.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20160515031935.4017.50971.stgit@devbox Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-05-11perf symbols: Use lsdir() for the search in kcore cache directoryMasami Hiramatsu
Use lsdir() to search in kcore cache directory. This also avoids checking hidden dot directory entries, because kcore cache directories must always have the name from timestamps when taking the kcore snapshots, and it never start with dot. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Hemant Kumar <hemant@linux.vnet.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20160511135208.23943.68071.stgit@devbox Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-05-11perf tools: Use SBUILD_ID_SIZE where applicableMasami Hiramatsu
Use the existing SBUILD_ID_SIZE macro instead of the equivalent BUILD_ID_SIZE * 2 + 1 expression for allocating a buffer for build-id strings. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Hemant Kumar <hemant@linux.vnet.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20160511135159.23943.57120.stgit@devbox Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-05-11perf symbols: Add dso__insert_symbol functionChris Phlipot
The current method for inserting symbols is to use the symbols__insert() function. However symbols__insert() does not update the dso symbol cache. This causes problems in the following scenario: 1. symbol not found at addr using dso__find_symbol 2. symbol inserted at addr using the existing symbols__insert function 3. symbol still not found at addr using dso__find_symbol() because cache isn't updated. This is undesired behavior. The undesired behavior in (3) is addressed by creating a new function, dso__insert_symbol() to both insert the symbol and update the symbol cache if necessary. If dso__insert_symbol() is used in (2) instead of symbols__insert(), then the undesired behavior in (3) is avoided. Signed-off-by: Chris Phlipot <cphlipot0@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1462937209-6032-2-git-send-email-cphlipot0@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-05-09perf symbols: Fix handling of zero-length symbols.Chris Phlipot
This change introduces a fix to symbols__find, so that it is able to find symbols of length zero (where start == end). The current code has the following problem: - The current implementation of symbols__find is unable to find any symbols of length zero. - The db-export framework explicitly creates zero length symbols at locations where no symbol currently exists. The combination of the two above behaviors results in behavior similar to the example below. 1. addr_location is created for a sample, but symbol is unable to be resolved. 2. db export creates an "unknown" symbol of length zero at that address and inserts it into the dso. 3. A new sample comes in at the same address, but symbol__find is unable to find the zero length symbol, so it is still unresolved. 4. db export sees the symbol is unresolved, and allocated a duplicate symbol, even though it already did this in step 2. This behavior continues every time an address without symbol information is seen, which causes a very large number of these symbols to be allocated. The effect of this fix can be observed by looking at the contents of an exported database before/after the fix (generated with scripts/python/export-to-postgresql.py) Ex. BEFORE THE CHANGE: example_db=# select count(*) from symbols; count -------- 900213 (1 row) example_db=# select count(*) from symbols where symbols.name='unknown'; count -------- 897355 (1 row) example_db=# select count(*) from symbols where symbols.name!='unknown'; count ------- 2858 (1 row) AFTER THE CHANGE: example_db=# select count(*) from symbols; count ------- 25217 (1 row) example_db=# select count(*) from symbols where name='unknown'; count ------- 22359 (1 row) example_db=# select count(*) from symbols where name!='unknown'; count ------- 2858 (1 row) Signed-off-by: Chris Phlipot <cphlipot0@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1462612620-25008-1-git-send-email-cphlipot0@gmail.com [ Moved the test to later in the rb_tree tests, as this not the likely case ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-04-19perf symbols: Allow loading kallsyms without considering kcore filesArnaldo Carvalho de Melo
Before the support for using /proc/kcore was introduced, the kallsyms routines used /proc/modules and the first 'perf test' entry expected finding maps for each module in the system, which is not the case with the kcore code. Provide a way to ignore kcore files so that the test can have its expectations met. Improving the test to cover kcore files as well needs to be done. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-ek5urnu103dlhfk4l6pcw041@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-04-14perf symbols: Move fprintf routines to separate object fileArnaldo Carvalho de Melo
To disentangle symbol printing from all the code related to symbol tables, resolution of addresses to symbols, etc. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-eik9g3hbtdc7ddv57f1d4v3p@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-04-11perf evsel: Allow unresolved symbol names to be printed as addressesArnaldo Carvalho de Melo
The fprintf_sym() and fprintf_callchain() methods now allow users to change the existing behaviour of showing "[unknown]" as the name of unresolved symbols to instead show "[0x123456]", i.e. its address. The current patch doesn't change tools to use this facility, the results from 'perf trace' and 'perf script' cotinue like: 70.109 ( 0.001 ms): qemu-system-x8/10153 poll(ufds: 0x7f2d93ffe870, nfds: 1) = 0 Timeout [unknown] (/usr/lib64/libc-2.22.so) [unknown] (/usr/lib64/libspice-server.so.1.10.0) [unknown] (/usr/lib64/libspice-server.so.1.10.0) [unknown] (/usr/lib64/libspice-server.so.1.10.0) start_thread+0xca (/usr/lib64/libpthread-2.22.so) __clone+0x6d (/usr/lib64/libc-2.22.so) The next patch will make 'perf trace' use the new formatting. Suggested-by: Milian Wolff <milian.wolff@kdab.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-fja1ods5vqpg42mdz09xcz3r@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-02-12perf symbols: Fix symbols searching for module in buildid-cacheWang Nan
Before this patch, if a sample is triggered inside a module not in /lib/modules/`uname -r`/, even if the module is in buildid-cache, 'perf report' will still be unable to find the correct symbol. For example: # rm -rf ~/.debug/ # perf buildid-cache -a ./mymodule.ko # perf probe -m ./mymodule.ko -a get_mymodule_val Added new event: probe:get_mymodule_val (on get_mymodule_val in mymodule) You can now use it in all perf tools, such as: perf record -e probe:get_mymodule_val -aR sleep 1 # perf record -e probe:get_mymodule_val cat /proc/mymodule mymodule:3 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.011 MB perf.data (1 samples) ] # perf report --stdio [SNIP] # # Overhead Command Shared Object Symbol # ........ ....... ................ ...................... # 100.00% cat [mymodule] [k] 0x0000000000000001 # perf report -vvvv --stdio dso__load_sym: adjusting symbol: st_value: 0 sh_addr: 0 sh_offset: 0x70 symbol__new: get_mymodule_val 0x70-0x8a [SNIP] This is caused by dso__load() -> dso__load_sym(). In dso__load(), kmod is true only when its file is found in some well know directories. All files loaded from buildid-cache are treated as user programs. Following dso__load_sym() set map->pgoff incorrectly. This patch gives kernel modules in buildid-cache a chance to adjust value of kmod. After dso__load() get the type of symbols, if it is buildid, check the last 3 chars of original filename against '.ko', and adjust the value of kmod if the file is a kernel module. Signed-off-by: Wang Nan <wangnan0@huawei.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Cody P Schafer <dev@codyps.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kirill Smelkov <kirr@nexedi.com> Cc: Li Zefan <lizefan@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1454680939-24963-3-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-26perf symbols: Do not read symbols/data from device filesJiri Olsa
With mem sampling we could get data source within mapped device file. Processing such sample would block during report phase on trying to read the device file. Chacking for device files and skip the processing if it's detected. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1453290995-18485-2-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-15perf symbols: Fix reading of build-id from vDSOBen Hutchings
We need to use the long name (the filename) when reading the build-id from a DSO. Using the short name doesn't work for (at least) vDSOs. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20160113172301.GT28542@decadent.org.uk Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-01-08perf report: Change default to use event group viewNamhyung Kim
The event group view feature is to see related events together. To use the group view, events should be recorded as a group with a dedicated syntax of surrounding events by braces (-e '{ evt1, evt2, ... }'). Also 'perf report' also requires the --group option to enable it. However it's almost always beneficial to use the group view to see the group events as it's more expressive. And I think it's more natural to see events together if they are recorded as a group. Thus this patch changes the default value to enable it. If users don't want to see like it and keep the original behavior, they can set the report.group config variable to false and/or use --no-group option in the 'perf report' command line. Requested-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Cc: Taeung Song <treeze.taeung@gmail.com> Link: http://lkml.kernel.org/r/1448807057-3506-1-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-26perf symbols: Add the path to vmlinux.debugEkaterina Tumanova
Currently when debuginfo is separated to vmlinux.debug, it's contents get ignored. Let's change that and add it to the vmlinux_path list. Signed-off-by: Ekaterina Tumanova <tumanova@linux.vnet.ibm.com> Acked-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1448469166-61363-3-git-send-email-tumanova@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-26perf symbols: Refactor vmlinux_path__init() to ease path additionsEkaterina Tumanova
Refactor vmlinux_path__init() to ease subsequent additions of new vmlinux locations. Signed-off-by: Ekaterina Tumanova <tumanova@linux.vnet.ibm.com> Acked-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1448469166-61363-2-git-send-email-tumanova@linux.vnet.ibm.com [ Rename vmlinux_path__update() to vmlinux_path__add() ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-12perf symbols: Allow forcing reading of non-root owned files by rootArnaldo Carvalho de Melo
When the root user tries to read a file owned by some other user we get: # ls -la perf.data -rw-------. 1 acme acme 20032 Nov 12 15:50 perf.data # perf report File perf.data not owned by current user or root (use -f to override) # perf report -f | grep -v ^# | head -2 30.96% ls [kernel.vmlinux] [k] do_set_pte 28.24% ls libc-2.20.so [.] intel_check_word # That wasn't happening when the symbol code tried to read a JIT map, where the same check was done but no forcing was possible, fix it. Reported-by: Brendan Gregg <brendan.d.gregg@gmail.com> Tested-by: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://permalink.gmane.org/gmane.linux.kernel.perf.user/2380 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-11-12perf symbols: Rebuild rbtree when adjusting symbols for kcoreAdrian Hunter
Normally symbols are read from the DSO and adjusted, if need be, so that the symbol start matches the file offset in the DSO file (we want the file offset because that is what we know from MMAP events). That is done by dso__load_sym() which inserts the symbols *after* adjusting them. In the case of kcore, the symbols have been read from kallsyms and the symbol start is the memory address. The symbols have to be adjusted to match the kcore file offsets. dso__split_kallsyms_for_kcore() does that, but now the adjustment is being done *after* the symbols have been inserted. It appears dso__split_kallsyms_for_kcore() was assuming that changing the symbol start would not change the order in the rbtree - which is, of course, not guaranteed. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Wang Nan <wangnan0@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/563CB241.2090701@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-28perf symbols: Fix endless loop in dso__split_kallsyms_for_kcoreJiri Olsa
Currently we split symbols based on the map comparison, but symbols are stored within dso objects and maps could point into same dso objects (kernel maps). Hence we could end up changing rbtree we are currently iterating and mess it up. It's easily reproduced on s390x by running: $ perf record -a -- sleep 3 $ perf buildid-list -i perf.data --with-hits The fix is to compare dso objects instead. Reported-by: Michael Petlan <mpetlan@redhat.com> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Kan Liang <kan.liang@intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20151026135130.GA26003@krava.brq.redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-28perf symbols: we can now read separate debug-info files based on a build IDDima Kogan
Recent GDB (at least on a vanilla Debian box) looks for debug information in /usr/lib/debug/.build-id/nn/nnnnnnn where nn/nnnnnn is the build-id of the stripped ELF binary. This is documented here: https://sourceware.org/gdb/onlinedocs/gdb/Separate-Debug-Files.html This was not working in perf because we didn't read the build id until AFTER we searched for the separate debug information file. This patch reads the build ID and THEN does the search. Signed-off-by: Dima Kogan <dima@secretsauce.net> Link: http://lkml.kernel.org/r/87si6pfwz4.fsf@secretsauce.net Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-12perf symbols: Try the .debug/ DSO cache as a last resortArnaldo Carvalho de Melo
Not as the first attempt at finding a vmlinux for the running kernel, this way we get a more informative filename to present in tools, it will check that the build-id is the same as the one previously loaded in the DSO in dso->build_id, reading from /sys/kernel/notes, for instance. E.g. in the annotation TUI, going from 'perf top', for the scsi_sg_alloc kernel function, in the first line: Before: scsi_sg_alloc /root/.debug/.build-id/28/2777c262e6b3c0451375163c9a81c893218ab1 After: scsi_sg_alloc /lib/modules/4.3.0-rc1+/build/vmlinux And: # ls -la /root/.debug/.build-id/28/2777c262e6b3c0451375163c9a81c893218ab1 lrwxrwxrwx. 1 root root 81 Sep 22 16:11 /root/.debug/.build-id/28/2777c262e6b3c0451375163c9a81c893218ab1 -> ../../home/git/build/v4.3.0-rc1+/vmlinux/282777c262e6b3c0451375163c9a81c893218ab1 # file ~/.debug/home/git/build/v4.3.0-rc1+/vmlinux/282777c262e6b3c0451375163c9a81c893218ab1 /root/.debug/home/git/build/v4.3.0-rc1+/vmlinux/282777c262e6b3c0451375163c9a81c893218ab1: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), statically linked, BuildID[sha1]=282777c262e6b3c0451375163c9a81c893218ab1, not stripped # The same as: # file /lib/modules/4.3.0-rc1+/build/vmlinux /lib/modules/4.3.0-rc1+/build/vmlinux: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), statically linked, BuildID[sha1]=282777c262e6b3c0451375163c9a81c893218ab1, not stripped Furthermore: # sha256sum /lib/modules/4.3.0-rc1+/build/vmlinux e7a789bbdc61029ec09140c228e1dd651271f38ef0b8416c0b7d5ff727b98be2 /lib/modules/4.3.0-rc1+/build/vmlinux # sha256sum ~/.debug/home/git/build/v4.3.0-rc1+/vmlinux/282777c262e6b3c0451375163c9a81c893218ab1 e7a789bbdc61029ec09140c228e1dd651271f38ef0b8416c0b7d5ff727b98be2 /root/.debug/home/git/build/v4.3.0-rc1+/vmlinux/282777c262e6b3c0451375163c9a81c893218ab1 [root@zoo new]# Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-9y42ikzq3jisiddoi6f07n8z@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-09-30tools lib symbol: Rename kallsyms2elf_type to kallsyms2elf_bindingArnaldo Carvalho de Melo
It is about binding, not type, we have just a letter in kallsyms that should map both for the ELF type (STT_FUNC, etc) and to the ELF symbol binding (STB_WEAK, STB_GLOBAL, etc), so rename it now before introducing kallsyms2_elf_type() Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-uu5vj343ms1q2wm55690on6v@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-08-28perf tools: Rename perf_session_env to perf_envKan Liang
As it is not necessarily tied to a perf.data file and needs using in places where a perf_session is not required. Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Kan Liang <kan.liang@intel.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1440755289-30939-4-git-send-email-kan.liang@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>