summaryrefslogtreecommitdiff
path: root/tools/testing/nvdimm
AgeCommit message (Collapse)Author
2018-04-16tools/testing/nvdimm: enable labels for nfit_test.1 dimmsDan Williams
Enable test cases for the kernel's fallback to label-less mode. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-04-16tools/testing/nvdimm: fix missing newline in nfit_test_dimm 'handle' attributeDan Williams
Sysfs userspace tooling generally expects the kernel to emit a newlines when reading sysfs attributes. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-04-16tools/testing/nvdimm: support nfit_test_dimm attributes under nfit_test.1Dan Williams
The nfit_test.1 bus provides a pmem topology without blk-aperture enabling, so it presents different failure modes for label space handling. Allow custom DSM command error injection. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-04-16tools/testing/nvdimm: allow custom error code injectionDan Williams
Given that libnvdimm driver stack takes specific actions on DIMM command error codes like -EACCES, provide a facility to inject custom failures. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-04-05libnvdimm, testing: update the default smart ctrl_temperatureVishal Verma
The default value for smart ctrl_temperature was the same as the threshold for ctrl_temperature. As a result, any arbitrary smart injection to the nfit_test dimm could cause this alarm to trigger and cause an acpi notification. Drop the default value to below the threshold, so that unrelated injections don't trigger notifications. Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-04-05libnvdimm, testing: Add emulation for smart injection commandsVishal Verma
Add support for the smart injection command in the nvdimm unit test framework. This allows for directly injecting to smart fields and flags that are supported in the injection command. If the injected values are past the threshold, then an acpi notification is also triggered. Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-03-06nfit_test: prevent parsing error of nfit_test.0Ross Zwisler
When you load nfit_test you currently see the following error in dmesg: nfit_test nfit_test.0: found a zero length table '0' parsing nfit This happens because when we parse the nfit_test.0 table via acpi_nfit_init(), we specify a size of nfit_test->nfit_size. For the first pass through nfit_test.0 where (t->setup_hotplug == 0) this is the size of the entire buffer we allocated, including space for the hot plug structures, not the size that we've actually filled in. Fix this by only trying to parse the size of the structures that we've filled in. Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-03-06nfit_test: fix buffer overrun, add sanity checkRoss Zwisler
It turns out that we were overrunning the 'nfit_buf' buffer in nfit_test0_setup() in the (t->setup_hotplug == 1) case because we failed to correctly account for all of the acpi_nfit_memory_map structures. Fix the structure count which will increase the allocation size of 'nfit_buf' in nfit_test0_alloc(). Also add some WARN_ON()s to nfit_test0_setup() and nfit_test1_setup() to catch future issues where the size of the buffer doesn't match the amount of data we're writing. Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-03-06nfit_test: improve structure offset handlingRoss Zwisler
In nfit_test0_setup() and nfit_test1_setup() we keep an 'offset' value which we use to calculate where in our 'nfit_buf' we will place our next structure. The handling of 'offset' and the calculation of the placement of the next structure is a bit inconsistent, though. We don't update 'offset' after we insert each structure, sometimes causing us to update it for multiple structures' sizes at once. When calculating the position of the next structure we aren't always able to just use 'offset', but sometimes have to add in other structure sizes as well. Fix this by updating 'offset' after each structure insertion in a consistent way, allowing us to always calculate the position of the next structure to be inserted by just using 'nfit_buf + offset'. Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-02-03Merge branch 'for-4.16/nfit' into libnvdimm-for-nextRoss Zwisler
2018-02-03Merge branch 'for-4.16/dax' into libnvdimm-for-nextRoss Zwisler
2018-02-01tools/testing/nvdimm: force nfit_test to depend on instrumented modulesDan Williams
The libnvdimm unit tests will fail when they are run against the production / in-tree version of libnvdimm.ko or nfit.ko due to symbols not being mocked per nfit_test's expectation. For example, nfit_test expects acpi_evaluate_dsm() to be replaced by __wrap_acpi_evaluate_dsm() to test how acpi_nfit_ctl() responds to different stimuli. Create a test-only symbol name that nfit_test links against to cause module load failures when the wrong module is present. For example, with this change, attempts to use the wrong module will report: nfit_test: Unknown symbol libnvdimm_test (err 0) Reported-by: Dave Jiang <dave.jiang@intel.com> Reported-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-02-01libnvdimm/nfit_test: adding support for unit testing enable LSS statusDave Jiang
Adding support code to simulate the enabling of LSS status in support of the Intel DSM v1.6 Function Index 10: Enable Latch System Shutdown Status. This is only for testing of libndctl support for LSS enable. The actual functionality requires a reboot and therefore is not simulated. The enable value is not recorded in nfit_test since there's no DSM to actually query the current status of the LSS enable. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-02-01libnvdimm/nfit_test: add firmware download emulationDave Jiang
Adding support in nfit_test for DSM v1.6 firmware update sequence. The test will simulate the flashing of firmware to the DIMM. A bogus version string will be returned as the test has no idea how to parse the firmware binary. Any bogus binary can be used to "update" as the actual binary is not copied into the kernel. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Vishal Verma <vishal.l.verma@intel.com> [ vishal: also move smart calls into the nd_cmd_call block ] Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-02-01nfit-test: Add platform cap support from ACPI 6.2a to testDave Jiang
Adding NFIT platform capabilities sub table in nfit_test simulated ACPI NFIT table. Only the first NFIT table is added with the capability sub-table. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
2018-01-08memremap: change devm_memremap_pages interface to use struct dev_pagemapChristoph Hellwig
This new interface is similar to how struct device (and many others) work. The caller initializes a 'struct dev_pagemap' as required and calls 'devm_memremap_pages'. This allows the pagemap structure to be embedded in another structure and thus container_of can be used. In this way application specific members can be stored in a containing struct. This will be used by the P2P infrastructure and HMM could probably be cleaned up to use it as well (instead of having it's own, similar 'hmm_devmem_pages_create' function). Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-12-04tools/testing/nvdimm: smart alarm/threshold controlDan Williams
Allow the smart_threshold values to be changed via the 'set smart threshold command' and trigger notifications when the thresholds are met. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-12-04nfit, libnvdimm: deprecate the generic SMART ioctlDan Williams
The kernel's ND_IOCTL_SMART_THRESHOLD command is based on a payload definition that has become broken / out-of-sync with recent versions of the NVDIMM_FAMILY_INTEL definition. Deprecate the use of the ND_IOCTL_SMART_THRESHOLD command in favor of the ND_CMD_CALL approach taken by NVDIMM_FAMILY_{HPE,MSFT}, where we can manage the per-vendor variance in userspace. In a couple years, when the new scheme is widely deployed in userspace packages, the ND_IOCTL_SMART_THRESHOLD support can be removed. For now we prevent new binaries from compiling against the kernel header definitions, but kernel still compatible with old binaries. The libndctl.h [1] header is now the authoritative interface definition for NVDIMM SMART. [1]: https://github.com/pmem/ndctl Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-11-17Merge tag 'libnvdimm-for-4.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm and dax updates from Dan Williams: "Save for a few late fixes, all of these commits have shipped in -next releases since before the merge window opened, and 0day has given a build success notification. The ext4 touches came from Jan, and the xfs touches have Darrick's reviewed-by. An xfstest for the MAP_SYNC feature has been through a few round of reviews and is on track to be merged. - Introduce MAP_SYNC and MAP_SHARED_VALIDATE, a mechanism to enable 'userspace flush' of persistent memory updates via filesystem-dax mappings. It arranges for any filesystem metadata updates that may be required to satisfy a write fault to also be flushed ("on disk") before the kernel returns to userspace from the fault handler. Effectively every write-fault that dirties metadata completes an fsync() before returning from the fault handler. The new MAP_SHARED_VALIDATE mapping type guarantees that the MAP_SYNC flag is validated as supported by the filesystem's ->mmap() file operation. - Add support for the standard ACPI 6.2 label access methods that replace the NVDIMM_FAMILY_INTEL (vendor specific) label methods. This enables interoperability with environments that only implement the standardized methods. - Add support for the ACPI 6.2 NVDIMM media error injection methods. - Add support for the NVDIMM_FAMILY_INTEL v1.6 DIMM commands for latch last shutdown status, firmware update, SMART error injection, and SMART alarm threshold control. - Cleanup physical address information disclosures to be root-only. - Fix revalidation of the DIMM "locked label area" status to support dynamic unlock of the label area. - Expand unit test infrastructure to mock the ACPI 6.2 Translate SPA (system-physical-address) command and error injection commands. Acknowledgements that came after the commits were pushed to -next: - 957ac8c421ad ("dax: fix PMD faults on zero-length files"): Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com> - a39e596baa07 ("xfs: support for synchronous DAX faults") and 7b565c9f965b ("xfs: Implement xfs_filemap_pfn_mkwrite() using __xfs_filemap_fault()") Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>" * tag 'libnvdimm-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (49 commits) acpi, nfit: add 'Enable Latch System Shutdown Status' command support dax: fix general protection fault in dax_alloc_inode dax: fix PMD faults on zero-length files dax: stop requiring a live device for dax_flush() brd: remove dax support dax: quiet bdev_dax_supported() fs, dax: unify IOMAP_F_DIRTY read vs write handling policy in the dax core tools/testing/nvdimm: unit test clear-error commands acpi, nfit: validate commands against the device type tools/testing/nvdimm: stricter bounds checking for error injection commands xfs: support for synchronous DAX faults xfs: Implement xfs_filemap_pfn_mkwrite() using __xfs_filemap_fault() ext4: Support for synchronous DAX faults ext4: Simplify error handling in ext4_dax_huge_fault() dax: Implement dax_finish_sync_fault() dax, iomap: Add support for synchronous faults mm: Define MAP_SYNC and VM_SYNC flags dax: Allow tuning whether dax_insert_mapping_entry() dirties entry dax: Allow dax_iomap_fault() to return pfn dax: Fix comment describing dax_iomap_fault() ...
2017-11-13tools/testing/nvdimm: unit test clear-error commandsDan Williams
Validate command parsing in acpi_nfit_ctl for the clear error command. This tests for a crash condition introduced by commit 4b27db7e26cd "acpi, nfit: add support for the _LSI, _LSR, and _LSW label methods". Cc: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-11-08tools/testing/nvdimm: stricter bounds checking for error injection commandsVishal Verma
Ensure that the in/out sizes passed in the nd_cmd_package are sane for the fixed output size commands (i.e. inject error and clear injected error). Reported-by: Dariusz Dokupil <dariusz.dokupil@intel.com> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-11-02nfit_test: when clearing poison, also remove badrange entriesVishal Verma
The injected badrange entries can only be cleared from the kernel's accounting by writing to the affected blocks, so when such a write sends the clear errror DSM to nfit_test, also clear the ranges from nfit_test's badrange list. This lets an 'ARS Inject error status' DSM to return the correct status, omitting the cleared ranges. Cc: Dave Jiang <dave.jiang@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-11-02nfit_test: add error injection DSMsDave Jiang
Add nfit_test emulation for the new ACPI 6.2 error injectino DSMs. This will allow unit tests to selectively inject the errors they wish to test for. Signed-off-by: Dave Jiang <dave.jiang@intel.com> [vishal: Move injection functions to ND_CMD_CALL] [vishal: Add support for the notification option] [vishal: move an nfit_test private definition into a local header] Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-11-02libnvdimm: move poison list functions to a new 'badrange' fileDave Jiang
nfit_test needs to use the poison list manipulation code as well. Make it more generic and in the process rename poison to badrange, and move all the related helpers to a new file. Signed-off-by: Dave Jiang <dave.jiang@intel.com> [vishal: Add badrange.o to nfit_test's Kbuild] [vishal: add a missed include in bus.c for the new badrange functions] [vishal: rename all instances of 'be' to 'bre'] Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-07acpi nfit: nfit_test supports translate SPAYasunori Goto
To test ndctl list which use interface of Translate SPA, nfit_test needs to emulates it. This test module searches region which includes SPA and returns 1 dimm handle which is last one. Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com> Reviewed-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-09-28nfit_test Make private definitions to command emulationYasunori Goto
Move private definitions to command emulation. These definitions were originally defined at include/uapi/linux/ndctl.h, but they are used at only nfit_test emulation now. Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com> Reviewed-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-09-18tools/testing/nvdimm: disable labels for nfit_test.1Dan Williams
Improve coverage of NVDIMM-N test scenarios by providing a test bus incapable of label operations. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-08-31libnvdimm, nd_blk: remove mmio_flush_range()Robin Murphy
mmio_flush_range() suffers from a lack of clearly-defined semantics, and is somewhat ambiguous to port to other architectures where the scope of the writeback implied by "flush" and ordering might matter, but MMIO would tend to imply non-cacheable anyway. Per the rationale in 67a3e8fe9015 ("nd_blk: change aperture mapping from WC to WB"), the only existing use is actually to invalidate clean cache lines for ARCH_MEMREMAP_PMEM type mappings *without* writeback. Since the recent cleanup of the pmem API, that also now happens to be the exact purpose of arch_invalidate_pmem(), which would be a far more well-defined tool for the job. Rather than risk potentially inconsistent implementations of mmio_flush_range() for the sake of one callsite, streamline things by removing it entirely and instead move the ARCH_MEMREMAP_PMEM related definitions up to the libnvdimm level, so they can be shared by NFIT as well. This allows NFIT to be enabled for arm64. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-06-15tools/testing/nvdimm: fix nfit_test buffer overflowYasunori Goto
The root cause of panic is the num_pm of nfit_test1 is wrong. Though 1 is specified for num_pm at nfit_test_init(), it must be 2, because nfit_test1->spa_set[] array has 2 elements. Since the array is smaller than expected, the driver breaks other area. (it is often the link list of devres). As a result, panic occurs like the following example. CPU: 4 PID: 2233 Comm: lt-libndctl Tainted: G O 4.12.0-rc1+ #12 RIP: 0010:__list_del_entry_valid+0x6c/0xa0 Call Trace: release_nodes+0x76/0x260 devres_release_all+0x3c/0x50 device_release_driver_internal+0x159/0x200 device_release_driver+0x12/0x20 bus_remove_device+0xfd/0x170 device_del+0x1e8/0x330 platform_device_del+0x28/0x90 platform_device_unregister+0x12/0x30 nfit_test_exit+0x2a/0x93b [nfit_test] Cc: <stable@vger.kernel.org> Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-06-07ACPI: Switch to use generic guid_t in acpi_evaluate_dsm()Andy Shevchenko
acpi_evaluate_dsm() and friends take a pointer to a raw buffer of 16 bytes. Instead we convert them to use guid_t type. At the same time we convert current users. acpi_str_to_uuid() becomes useless after the conversion and it's safe to get rid of it. Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Borislav Petkov <bp@suse.de> Acked-by: Dan Williams <dan.j.williams@intel.com> Cc: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Cc: Ben Skeggs <bskeggs@redhat.com> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Joerg Roedel <jroedel@suse.de> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Yisen Zhuang <yisen.zhuang@huawei.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-05-04Merge branch 'for-4.12/dax' into libnvdimm-for-nextDan Williams
2017-04-19pmem: add dax_operations supportDan Williams
Setup a dax_device to have the same lifetime as the pmem block device and add a ->direct_access() method that is equivalent to pmem_direct_access(). Once fs/dax.c has been converted to use dax_operations the old pmem_direct_access() will be removed. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-04-18acpi, nfit: fix module unload vs workqueue shutdown raceDan Williams
The workqueue may still be running when the devres callbacks start firing to deallocate an acpi_nfit_desc instance. Stop and flush the workqueue before letting any other devres de-allocations proceed. Reported-by: Linda Knippers <linda.knippers@hpe.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-04-18tools/testing/nvdimm: fix nfit_test shutdown crashDan Williams
Keep the nfit_test instances alive until after nfit_test_teardown(), as we may be doing resource lookups until the final un-registrations have completed. This fixes crashes of the form. BUG: unable to handle kernel NULL pointer dereference at 0000000000000038 IP: __release_resource+0x12/0x90 Call Trace: remove_resource+0x23/0x40 __wrap_remove_resource+0x29/0x30 [nfit_test_iomap] acpi_nfit_remove_resource+0xe/0x10 [nfit] devm_action_release+0xf/0x20 release_nodes+0x16d/0x2b0 devres_release_all+0x3c/0x60 device_release+0x21/0x90 kobject_release+0x6a/0x170 kobject_put+0x2f/0x60 put_device+0x17/0x20 platform_device_unregister+0x20/0x30 nfit_test_exit+0x36/0x960 [nfit_test] Reported-by: Linda Knippers <linda.knippers@hpe.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-04-17tools/testing/nvdimm: test acpi 6.1 health state flagsDan Williams
Add a simulated dimm with an ACPI_NFIT_MEM_MAP_FAILED indication, and set the ACPI_NFIT_MEM_HEALTH_ENABLED flag on all the dimms where nfit_test simulates health events, but spread it out over several redundant memdev entries to test that the nfit driver coalesces all the flags. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-04-12dax: refactor dax-fs into a generic provider of 'struct dax_device' instancesDan Williams
We want dax capable drivers to be able to publish a set of dax operations [1]. However, we do not want to further abuse block_devices to advertise these operations. Instead we will attach these operations to a dax device and add a lookup mechanism to go from block device path to a dax device. A dax capable driver like pmem or brd is responsible for registering a dax device, alongside a block device, and then a dax capable filesystem is responsible for retrieving the dax device by path name if it wants to call dax_operations. For now, we refactor the dax pseudo-fs to be a generic facility, rather than an implementation detail, of the device-dax use case. Where a "dax device" is just an inode + dax infrastructure, and "Device DAX" is a mapping service layered on top of that base 'struct dax_device'. "Filesystem DAX" is then a mapping service that layers a filesystem on top of that same base device. Filesystem DAX is associated with a block_device for now, but perhaps directly to a dax device in the future, or for new pmem-only filesystems. [1]: https://lkml.org/lkml/2017/1/19/880 Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-04-12device-dax, tools/testing/nvdimm: enable device-dax with mock resourcesDave Jiang
Provide a replacement pgoff_to_phys() that translates an nfit_test resource (allocated by vmalloc()) to a pfn. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-03-01tools/testing/nvdimm: make iset cookie predictableDan Williams
For testing changes to the iset cookie algorithm we need a value that is constant from run-to-run. Stop including dynamic data in the emulated region_offset values. Also, pick values that sort in a different order depending on whether the comparison is a memcmp() of two 8-byte arrays or subtraction of two 64-bit values. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-12-17Merge branch 'for-4.10/libnvdimm' into libnvdimm-for-nextDan Williams
2016-12-06tools/testing/nvdimm: unit test acpi_nfit_ctl()Dan Williams
A recent flurry of bug discoveries in the nfit driver's DSM marshalling routine has highlighted the fact that we do not have unit test coverage for this routine. Add a self-test of acpi_nfit_ctl() routine before probing the "nfit_test.0" device. This mocks stimulus to acpi_nfit_ctl() and if any of the tests fail "nfit_test.0" will be unavailable causing the rest of the tests to not run / fail. This unit test will also be a place to land reproductions of quirky BIOS behavior discovered in the field and ensure the kernel does not regress against implementations it has seen in practice. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-10-19tools/testing/nvdimm: dynamic label supportDan Williams
Update nfit_test infrastructure to enable labels for the dimm on the nfit_test.1 bus. This bus has a pmem region without aliased blk space, so it is a candidate for dynamically enabling label support by writing a namespace index block. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-10-11Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge more updates from Andrew Morton: - a few block updates that fell in my lap - lib/ updates - checkpatch - autofs - ipc - a ton of misc other things * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (100 commits) mm: split gfp_mask and mapping flags into separate fields fs: use mapping_set_error instead of opencoded set_bit treewide: remove redundant #include <linux/kconfig.h> hung_task: allow hung_task_panic when hung_task_warnings is 0 kthread: add kerneldoc for kthread_create() kthread: better support freezable kthread workers kthread: allow to modify delayed kthread work kthread: allow to cancel kthread work kthread: initial support for delayed kthread work kthread: detect when a kthread work is used by more workers kthread: add kthread_destroy_worker() kthread: add kthread_create_worker*() kthread: allow to call __kthread_create_on_node() with va_list args kthread/smpboot: do not park in kthread_create_on_cpu() kthread: kthread worker API cleanup kthread: rename probe_kthread_data() to kthread_probe_data() scripts/tags.sh: enable code completion in VIM mm: kmemleak: avoid using __va() on addresses that don't have a lowmem mapping kdump, vmcoreinfo: report memory sections virtual addresses ipc/sem.c: add cond_resched in exit_sme ...
2016-10-11treewide: remove redundant #include <linux/kconfig.h>Masahiro Yamada
Kernel source files need not include <linux/kconfig.h> explicitly because the top Makefile forces to include it with: -include $(srctree)/include/linux/kconfig.h This commit removes explicit includes except the following: * arch/s390/include/asm/facilities_src.h * tools/testing/radix-tree/linux/kernel.h These two are used for host programs. Link: http://lkml.kernel.org/r/1473656164-11929-1-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-07Merge branch 'for-4.9/libnvdimm' into libnvdimm-for-nextDan Williams
2016-10-07tools/testing/nvdimm: support for sub-dividing a pmem regionDan Williams
Update nfit_test to handle multiple sub-allocations within a given pmem region. The mock resource now tracks and un-tracks sub-ranges as they are requested and released (either explicitly or via devm callback). Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-09-21tools/testing/nvdimm: test get_config_size DSM failuresDan Williams
Add an nfit_test specific attribute for gating whether a get_config_size DSM, or any DSM for that matter, succeeds or fails. The get_config_size DSM is initial motivation since that is the first command libnvdimm core issues to determine the state of the namespace label area. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-09-19tools/testing/nvdimm: fix allocation range for mock flush hint tablesDan Williams
Commit 480b6837aa57 "nvdimm: fix PHYS_PFN/PFN_PHYS mixup" identified that we were passing an invalid address to devm_nvdimm_ioremap(). With that fixed it exposed a bug in the memory reservation size for flush hint tables. Since we map a full page we need to mock a full page of memory to back the flush hint table entries. Cc: Oliver O'Halloran <oohall@gmail.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-09-01tools/testing/nvdimm: unit test for acpi_nvdimm_notify()Dan Williams
Trigger an nmemX/nfit/flags attribute to fire an event whenever a smart-threshold DSM is received. Reviewed-by: Vishal Verma <vishal.l.verma@intel.com> Acked-by: Rafael J. Wysocki <rafael@kernel.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-08-23tools/testing/nvdimm: unit test for acpi_nfit_notify()Dan Williams
We have had a couple bugs in this implementation in the past and before we add another ->notify() implementation for nvdimm devices, lets allow this routine to be exercised via nfit_test. Rewrite acpi_nfit_notify() in terms of a generic struct device and acpi_handle parameter, and then implement a mock acpi_evaluate_object() that returns a _FIT payload. Cc: Vishal Verma <vishal.l.verma@intel.com> Reviewed-by: Vishal Verma <vishal.l.verma@intel.com> Acked-by: Rafael J. Wysocki <rafael@kernel.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>