summaryrefslogtreecommitdiff
path: root/tools
AgeCommit message (Collapse)Author
2022-01-20selftests/bpf: convert remaining legacy map definitionsAndrii Nakryiko
Converted few remaining legacy BPF map definition to BTF-defined ones. For the remaining two bpf_map_def-based legacy definitions that we want to keep for testing purposes until libbpf 1.0 release, guard them in pragma to suppres deprecation warnings which will be added in libbpf in the next commit. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20220120060529.1890907-3-andrii@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-01-20selftests/bpf: fail build on compilation warningAndrii Nakryiko
It's very easy to miss compilation warnings without -Werror, which is not set for selftests. libbpf and bpftool are already strict about this, so make selftests/bpf also treat compilation warnings as errors to catch such regressions early. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20220120060529.1890907-2-andrii@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-01-20selftests/bpf: Do not fail build if CONFIG_NF_CONNTRACK=m/nKumar Kartikeya Dwivedi
Some users have complained that selftests fail to build when CONFIG_NF_CONNTRACK=m. It would be useful to allow building as long as it is set to module or built-in, even though in case of building as module, user would need to load it before running the selftest. Note that this also allows building selftest when CONFIG_NF_CONNTRACK is disabled. Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220120164932.2798544-1-memxor@gmail.com
2022-01-20selftests: bpf: Fix bind on used portFelix Maurer
The bind_perm BPF selftest failed when port 111/tcp was already in use during the test. To fix this, the test now runs in its own network name space. To use unshare, it is necessary to reorder the includes. The style of the includes is adapted to be consistent with the other prog_tests. v2: Replace deprecated CHECK macro with ASSERT_OK Fixes: 8259fdeb30326 ("selftests/bpf: Verify that rebinding to port < 1024 from BPF works") Signed-off-by: Felix Maurer <fmaurer@redhat.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/551ee65533bb987a43f93d88eaf2368b416ccd32.1642518457.git.fmaurer@redhat.com
2022-01-20bpf: selftests: Get rid of CHECK macro in xdp_bpf2bpf.cLorenzo Bianconi
Rely on ASSERT* macros and get rid of deprecated CHECK ones in xdp_bpf2bpf bpf selftest. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/df7e5098465016e27d91f2c69a376a35d63a7621.1642679130.git.lorenzo@kernel.org
2022-01-20bpf: selftests: Get rid of CHECK macro in xdp_adjust_tail.cLorenzo Bianconi
Rely on ASSERT* macros and get rid of deprecated CHECK ones in xdp_adjust_tail bpf selftest. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/c0ab002ffa647a20ec9e584214bf0d4373142b54.1642679130.git.lorenzo@kernel.org
2022-01-19selftests/bpf: Update sockopt_sk test to the use bpf_set_retvalYiFei Zhu
The tests would break without this patch, because at one point it calls getsockopt(fd, SOL_TCP, TCP_ZEROCOPY_RECEIVE, &buf, &optlen) This getsockopt receives the kernel-set -EINVAL. Prior to this patch series, the eBPF getsockopt hook's -EPERM would override kernel's -EINVAL, however, after this patch series, return 0's automatic -EPERM will not; the eBPF prog has to explicitly bpf_set_retval(-EPERM) if that is wanted. I also removed the explicit mentions of EPERM in the comments in the prog. Signed-off-by: YiFei Zhu <zhuyifei@google.com> Reviewed-by: Stanislav Fomichev <sdf@google.com> Link: https://lore.kernel.org/r/4f20b77cb46812dbc2bdcd7e3fa87c7573bde55e.1639619851.git.zhuyifei@google.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-01-19selftests/bpf: Test bpf_{get,set}_retval behavior with cgroup/sockoptYiFei Zhu
The tests checks how different ways of interacting with the helpers (getting retval, setting EUNATCH, EISCONN, and legacy reject returning 0 without setting retval), produce different results in both the setsockopt syscall and the retval returned by the helper. A few more tests verify the interaction between the retval of the helper and the retval in getsockopt context. Signed-off-by: YiFei Zhu <zhuyifei@google.com> Reviewed-by: Stanislav Fomichev <sdf@google.com> Link: https://lore.kernel.org/r/43ec60d679ae3f4f6fd2460559c28b63cb93cd12.1639619851.git.zhuyifei@google.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-01-19bpf: Add cgroup helpers bpf_{get,set}_retval to get/set syscall return valueYiFei Zhu
The helpers continue to use int for retval because all the hooks are int-returning rather than long-returning. The return value of bpf_set_retval is int for future-proofing, in case in the future there may be errors trying to set the retval. After the previous patch, if a program rejects a syscall by returning 0, an -EPERM will be generated no matter if the retval is already set to -err. This patch change it being forced only if retval is not -err. This is because we want to support, for example, invoking bpf_set_retval(-EINVAL) and return 0, and have the syscall return value be -EINVAL not -EPERM. For BPF_PROG_CGROUP_INET_EGRESS_RUN_ARRAY, the prior behavior is that, if the return value is NET_XMIT_DROP, the packet is silently dropped. We preserve this behavior for backward compatibility reasons, so even if an errno is set, the errno does not return to caller. However, setting a non-err to retval cannot propagate so this is not allowed and we return a -EFAULT in that case. Signed-off-by: YiFei Zhu <zhuyifei@google.com> Reviewed-by: Stanislav Fomichev <sdf@google.com> Link: https://lore.kernel.org/r/b4013fd5d16bed0b01977c1fafdeae12e1de61fb.1639619851.git.zhuyifei@google.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-01-19libbpf: Improve btf__add_btf() with an additional hashmap for strings.Kui-Feng Lee
Add a hashmap to map the string offsets from a source btf to the string offsets from a target btf to reduce overheads. btf__add_btf() calls btf__add_str() to add strings from a source to a target btf. It causes many string comparisons, and it is a major hotspot when adding a big btf. btf__add_str() uses strcmp() to check if a hash entry is the right one. The extra hashmap here compares offsets of strings, that are much cheaper. It remembers the results of btf__add_str() for later uses to reduce the cost. We are parallelizing BTF encoding for pahole by creating separated btf instances for worker threads. These per-thread btf instances will be added to the btf instance of the main thread by calling btf__add_str() to deduplicate and write out. With this patch and -j4, the running time of pahole drops to about 6.0s from 6.6s. The following lines are the summary of 'perf stat' w/o the change. 6.668126396 seconds time elapsed 13.451054000 seconds user 0.715520000 seconds sys The following lines are the summary w/ the change. 5.986973919 seconds time elapsed 12.939903000 seconds user 0.724152000 seconds sys V4 fixes a bug of error checking against the pointer returned by hashmap__new(). [v3] https://lore.kernel.org/bpf/20220118232053.2113139-1-kuifeng@fb.com/ [v2] https://lore.kernel.org/bpf/20220114193713.461349-1-kuifeng@fb.com/ Signed-off-by: Kui-Feng Lee <kuifeng@fb.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220119180214.255634-1-kuifeng@fb.com
2022-01-19uapi/bpf: Add missing description and returns for helper documentationUsama Arif
Both description and returns section will become mandatory for helpers and syscalls in a later commit to generate man pages. This commit also adds in the documentation that BPF_PROG_RUN is an alias for BPF_PROG_TEST_RUN for anyone searching for the syscall in the generated man pages. Signed-off-by: Usama Arif <usama.arif@bytedance.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220119114442.1452088-1-usama.arif@bytedance.com
2022-01-19bpftool: Adding support for BTF program namesRaman Shukhau
`bpftool prog list` and other bpftool subcommands that show BPF program names currently get them from bpf_prog_info.name. That field is limited to 16 (BPF_OBJ_NAME_LEN) chars which leads to truncated names since many progs have much longer names. The idea of this change is to improve all bpftool commands that output prog name so that bpftool uses info from BTF to print program names if available. It tries bpf_prog_info.name first and fall back to btf only if the name is suspected to be truncated (has 15 chars length). Right now `bpftool p show id <id>` returns capped prog name <id>: kprobe name example_cap_cap tag 712e... ... With this change it would return <id>: kprobe name example_cap_capable tag 712e... ... Note, other commands that print prog names (e.g. "bpftool cgroup tree") are also addressed in this change. Signed-off-by: Raman Shukhau <ramasha@fb.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220119100255.1068997-1-ramasha@fb.com
2022-01-18libbpf: Define BTF_KIND_* constants in btf.h to avoid compilation errorsToke Høiland-Jørgensen
The btf.h header included with libbpf contains inline helper functions to check for various BTF kinds. These helpers directly reference the BTF_KIND_* constants defined in the kernel header, and because the header file is included in user applications, this happens in the user application compile units. This presents a problem if a user application is compiled on a system with older kernel headers because the constants are not available. To avoid this, add #defines of the constants directly in btf.h before using them. Since the kernel header moved to an enum for BTF_KIND_*, the #defines can shadow the enum values without any errors, so we only need #ifndef guards for the constants that predates the conversion to enum. We group these so there's only one guard for groups of values that were added together. [0] Closes: https://github.com/libbpf/libbpf/issues/436 Fixes: 223f903e9c83 ("bpf: Rename BTF_KIND_TAG to BTF_KIND_DECL_TAG") Fixes: 5b84bd10363e ("libbpf: Add support for BTF_KIND_TAG") Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Link: https://lore.kernel.org/bpf/20220118141327.34231-1-toke@redhat.com
2022-01-18selftest/bpf: Fix a stale comment.Kuniyuki Iwashima
The commit b8a58aa6fccc ("af_unix: Cut unix_validate_addr() out of unix_mkname().") moved the bound test part into unix_validate_addr(). Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp> Link: https://lore.kernel.org/r/20220113002849.4384-6-kuniyu@amazon.co.jp Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-01-18selftest/bpf: Test batching and bpf_(get|set)sockopt in bpf unix iter.Kuniyuki Iwashima
This patch adds a test for the batching and bpf_(get|set)sockopt in bpf unix iter. It does the following. 1. Creates an abstract UNIX domain socket 2. Call bpf_setsockopt() 3. Call bpf_getsockopt() and save the value 4. Call setsockopt() 5. Call getsockopt() and save the value 6. Compare the saved values Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp> Link: https://lore.kernel.org/r/20220113002849.4384-5-kuniyu@amazon.co.jp Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-01-18selftests/bpf: Add test for race in btf_try_get_moduleKumar Kartikeya Dwivedi
This adds a complete test case to ensure we never take references to modules not in MODULE_STATE_LIVE, which can lead to UAF, and it also ensures we never access btf->kfunc_set_tab in an inconsistent state. The test uses userfaultfd to artificially widen the race. When run on an unpatched kernel, it leads to the following splat: [root@(none) bpf]# ./test_progs -t bpf_mod_race/ksym [ 55.498171] BUG: unable to handle page fault for address: fffffbfff802548b [ 55.499206] #PF: supervisor read access in kernel mode [ 55.499855] #PF: error_code(0x0000) - not-present page [ 55.500555] PGD a4fa9067 P4D a4fa9067 PUD a4fa5067 PMD 1b44067 PTE 0 [ 55.501499] Oops: 0000 [#1] PREEMPT SMP KASAN NOPTI [ 55.502195] CPU: 0 PID: 83 Comm: kworker/0:2 Tainted: G OE 5.16.0-rc4+ #151 [ 55.503388] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ArchLinux 1.15.0-1 04/01/2014 [ 55.504777] Workqueue: events bpf_prog_free_deferred [ 55.505563] RIP: 0010:kasan_check_range+0x184/0x1d0 [ 55.509140] RSP: 0018:ffff88800560fcf0 EFLAGS: 00010282 [ 55.509977] RAX: fffffbfff802548b RBX: fffffbfff802548c RCX: ffffffff9337b6ba [ 55.511096] RDX: fffffbfff802548c RSI: 0000000000000004 RDI: ffffffffc012a458 [ 55.512143] RBP: fffffbfff802548b R08: 0000000000000001 R09: ffffffffc012a45b [ 55.513228] R10: fffffbfff802548b R11: 0000000000000001 R12: ffff888001b5f598 [ 55.514332] R13: ffff888004f49ac8 R14: 0000000000000000 R15: ffff888092449400 [ 55.515418] FS: 0000000000000000(0000) GS:ffff888092400000(0000) knlGS:0000000000000000 [ 55.516705] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 55.517560] CR2: fffffbfff802548b CR3: 0000000007c10006 CR4: 0000000000770ef0 [ 55.518672] PKRU: 55555554 [ 55.519022] Call Trace: [ 55.519483] <TASK> [ 55.519884] module_put.part.0+0x2a/0x180 [ 55.520642] bpf_prog_free_deferred+0x129/0x2e0 [ 55.521478] process_one_work+0x4fa/0x9e0 [ 55.522122] ? pwq_dec_nr_in_flight+0x100/0x100 [ 55.522878] ? rwlock_bug.part.0+0x60/0x60 [ 55.523551] worker_thread+0x2eb/0x700 [ 55.524176] ? __kthread_parkme+0xd8/0xf0 [ 55.524853] ? process_one_work+0x9e0/0x9e0 [ 55.525544] kthread+0x23a/0x270 [ 55.526088] ? set_kthread_struct+0x80/0x80 [ 55.526798] ret_from_fork+0x1f/0x30 [ 55.527413] </TASK> [ 55.527813] Modules linked in: bpf_testmod(OE) [last unloaded: bpf_testmod] [ 55.530846] CR2: fffffbfff802548b [ 55.531341] ---[ end trace 1af41803c054ad6d ]--- [ 55.532136] RIP: 0010:kasan_check_range+0x184/0x1d0 [ 55.535887] RSP: 0018:ffff88800560fcf0 EFLAGS: 00010282 [ 55.536711] RAX: fffffbfff802548b RBX: fffffbfff802548c RCX: ffffffff9337b6ba [ 55.537821] RDX: fffffbfff802548c RSI: 0000000000000004 RDI: ffffffffc012a458 [ 55.538899] RBP: fffffbfff802548b R08: 0000000000000001 R09: ffffffffc012a45b [ 55.539928] R10: fffffbfff802548b R11: 0000000000000001 R12: ffff888001b5f598 [ 55.541021] R13: ffff888004f49ac8 R14: 0000000000000000 R15: ffff888092449400 [ 55.542108] FS: 0000000000000000(0000) GS:ffff888092400000(0000) knlGS:0000000000000000 [ 55.543260]CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 55.544136] CR2: fffffbfff802548b CR3: 0000000007c10006 CR4: 0000000000770ef0 [ 55.545317] PKRU: 55555554 [ 55.545671] note: kworker/0:2[83] exited with preempt_count 1 Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Link: https://lore.kernel.org/r/20220114163953.1455836-11-memxor@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-01-18selftests/bpf: Extend kfunc selftestsKumar Kartikeya Dwivedi
Use the prog_test kfuncs to test the referenced PTR_TO_BTF_ID kfunc support, and PTR_TO_CTX, PTR_TO_MEM argument passing support. Also testing the various failure cases for invalid kfunc prototypes. Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Link: https://lore.kernel.org/r/20220114163953.1455836-10-memxor@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-01-18selftests/bpf: Add test_verifier support to fixup kfunc call insnsKumar Kartikeya Dwivedi
This allows us to add tests (esp. negative tests) where we only want to ensure the program doesn't pass through the verifier, and also verify the error. The next commit will add the tests making use of this. Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Link: https://lore.kernel.org/r/20220114163953.1455836-9-memxor@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-01-18selftests/bpf: Add test for unstable CT lookup APIKumar Kartikeya Dwivedi
This tests that we return errors as documented, and also that the kfunc calls work from both XDP and TC hooks. Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Link: https://lore.kernel.org/r/20220114163953.1455836-8-memxor@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-01-18bpf: Remove check_kfunc_call callback and old kfunc BTF ID APIKumar Kartikeya Dwivedi
Completely remove the old code for check_kfunc_call to help it work with modules, and also the callback itself. The previous commit adds infrastructure to register all sets and put them in vmlinux or module BTF, and concatenates all related sets organized by the hook and the type. Once populated, these sets remain immutable for the lifetime of the struct btf. Also, since we don't need the 'owner' module anywhere when doing check_kfunc_call, drop the 'btf_modp' module parameter from find_kfunc_desc_btf. Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Link: https://lore.kernel.org/r/20220114163953.1455836-4-memxor@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-01-14test: selftests: Remove unused various in sockmap_verdict_prog.cMenglong Dong
'lport' and 'rport' in bpf_prog1() of sockmap_verdict_prog.c is not used, just remove them. Signed-off-by: Menglong Dong <imagedong@tencent.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20220113031658.633290-1-imagedong@tencent.com
2022-01-14tools/resolve_btfids: Build with host flagsConnor O'Brien
resolve_btfids is built using $(HOSTCC) and $(HOSTLD) but does not pick up the corresponding flags. As a result, host-specific settings (such as a sysroot specified via HOSTCFLAGS=--sysroot=..., or a linker specified via HOSTLDFLAGS=-fuse-ld=...) will not be respected. Fix this by setting CFLAGS to KBUILD_HOSTCFLAGS and LDFLAGS to KBUILD_HOSTLDFLAGS. Also pass the cflags through to libbpf via EXTRA_CFLAGS to ensure that the host libbpf is built with flags consistent with resolve_btfids. Signed-off-by: Connor O'Brien <connoro@google.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20220112002503.115968-1-connoro@google.com
2022-01-12libbpf: Deprecate bpf_map__def() APIChristy Lee
All fields accessed via bpf_map_def can now be accessed via appropirate getters and setters. Mark bpf_map__def() API as deprecated. Signed-off-by: Christy Lee <christylee@fb.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220108004218.355761-6-christylee@fb.com
2022-01-12selftests/bpf: Stop using bpf_map__def() APIChristy Lee
libbpf bpf_map__def() API is being deprecated, replace selftests/bpf's usage with the appropriate getters and setters. Signed-off-by: Christy Lee <christylee@fb.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220108004218.355761-5-christylee@fb.com
2022-01-12perf: Stop using bpf_map__def() APIChristy Lee
libbpf bpf_map__def() API is being deprecated, replace perf's usage with the appropriate getters and setters. Signed-off-by: Christy Lee <christylee@fb.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220108004218.355761-4-christylee@fb.com
2022-01-12bpftool: Stop using bpf_map__def() APIChristy Lee
libbpf bpf_map__def() API is being deprecated, replace bpftool's usage with the appropriate getters and setters Signed-off-by: Christy Lee <christylee@fb.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220108004218.355761-3-christylee@fb.com
2022-01-12bpftool: Only set obj->skeleton on complete successWei Fu
After `bpftool gen skeleton`, the ${bpf_app}.skel.h will provide that ${bpf_app_name}__open helper to load bpf. If there is some error like ENOMEM, the ${bpf_app_name}__open will rollback(free) the allocated object, including `bpf_object_skeleton`. Since the ${bpf_app_name}__create_skeleton set the obj->skeleton first and not rollback it when error, it will cause double-free in ${bpf_app_name}__destory at ${bpf_app_name}__open. Therefore, we should set the obj->skeleton before return 0; Fixes: 5dc7a8b21144 ("bpftool, selftests/bpf: Embed object file inside skeleton") Signed-off-by: Wei Fu <fuweid89@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220108084008.1053111-1-fuweid89@gmail.com
2022-01-12libbpf: Fix possible NULL pointer dereference when destroying skeletonYafang Shao
When I checked the code in skeleton header file generated with my own bpf prog, I found there may be possible NULL pointer dereference when destroying skeleton. Then I checked the in-tree bpf progs, finding that is a common issue. Let's take the generated samples/bpf/xdp_redirect_cpu.skel.h for example. Below is the generated code in xdp_redirect_cpu__create_skeleton(): xdp_redirect_cpu__create_skeleton struct bpf_object_skeleton *s; s = (struct bpf_object_skeleton *)calloc(1, sizeof(*s)); if (!s) goto error; ... error: bpf_object__destroy_skeleton(s); return -ENOMEM; After goto error, the NULL 's' will be deferenced in bpf_object__destroy_skeleton(). We can simply fix this issue by just adding a NULL check in bpf_object__destroy_skeleton(). Fixes: d66562fba1ce ("libbpf: Add BPF object skeleton support") Signed-off-by: Yafang Shao <laoar.shao@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220108134739.32541-1-laoar.shao@gmail.com
2022-01-12selftests/bpf: Change bpf_prog_attach_xattr() to bpf_prog_attach_opts()Christy Lee
bpf_prog_attach_opts() is being deprecated and renamed to bpf_prog_attach_xattr(). Change all selftests/bpf's uage to the new name. Signed-off-by: Christy Lee <christylee@fb.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220107184604.3668544-3-christylee@fb.com
2022-01-12libbpf: Rename bpf_prog_attach_xattr() to bpf_prog_attach_opts()Christy Lee
All xattr APIs are being dropped, let's converge to the convention used in high-level APIs and rename bpf_prog_attach_xattr to bpf_prog_attach_opts. Signed-off-by: Christy Lee <christylee@fb.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220107184604.3668544-2-christylee@fb.com
2022-01-12bpftool: Fix error check when calling hashmap__new()Mauricio Vásquez
hashmap__new() encodes errors with ERR_PTR(), hence it's not valid to check the returned pointer against NULL and IS_ERR() has to be used instead. libbpf_get_error() can't be used in this case as hashmap__new() is not part of the public libbpf API and it'll continue using ERR_PTR() after libbpf 1.0. Fixes: 8f184732b60b ("bpftool: Switch to libbpf's hashmap for pinned paths of BPF objects") Fixes: 2828d0d75b73 ("bpftool: Switch to libbpf's hashmap for programs/maps in BTF listing") Fixes: d6699f8e0f83 ("bpftool: Switch to libbpf's hashmap for PIDs/names references") Signed-off-by: Mauricio Vásquez <mauricio@kinvolk.io> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Reviewed-by: Quentin Monnet <quentin@isovalent.com> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20220107152620.192327-2-mauricio@kinvolk.io
2022-01-12libbpf: Use IS_ERR_OR_NULL() in hashmap__free()Mauricio Vásquez
hashmap__new() uses ERR_PTR() to return an error so it's better to use IS_ERR_OR_NULL() in order to check the pointer before calling free(). This will prevent freeing an invalid pointer if somebody calls hashmap__free() with the result of a failed hashmap__new() call. Signed-off-by: Mauricio Vásquez <mauricio@kinvolk.io> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20220107152620.192327-1-mauricio@kinvolk.io
2022-01-10Merge tag 'thermal-5.17-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull thermal control updates from Rafael Wysocki: "These add a new driver for Renesas RZ/G2L TSU, update a few existing thermal control drivers and clean up the tmon utility. Specifics: - Add new TSU driver and DT bindings for the Renesas RZ/G2L platform (Biju Das). - Fix missing check when calling reset_control_deassert() in the rz2gl thermal driver (Biju Das). - In preparation for FORTIFY_SOURCE performing compile-time and run-time field bounds checking for memcpy(), avoid intentionally writing across neighboring fields in the int340x thermal control driver (Kees Cook). - Fix RFIM mailbox write commands handling in the int340x thermal control driver (Sumeet Pawnikar). - Fix PM issue occurring in the iMX thermal control driver during suspend/resume by implementing PM runtime support in it (Oleksij Rempel). - Add 'const' annotation to thermal_cooling_ops in the Intel powerclamp driver (Rikard Falkeborn). - Fix missing ADC bit set in the iMX8MP thermal driver to enable the sensor (Paul Gerber). - Drop unused local variable definition from tmon (ran jianping)" * tag 'thermal-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: thermal/drivers/int340x: Fix RFIM mailbox write commands thermal/drivers/rz2gl: Add error check for reset_control_deassert() thermal/drivers/imx8mm: Enable ADC when enabling monitor thermal/drivers: Add TSU driver for RZ/G2L dt-bindings: thermal: Document Renesas RZ/G2L TSU thermal/drivers/intel_powerclamp: Constify static thermal_cooling_device_ops thermal/drivers/imx: Implement runtime PM support thermal: tools: tmon: remove unneeded local variable thermal: int340x: Use struct_group() for memcpy() region
2022-01-10Merge tag '5.17-net-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core ---- - Defer freeing TCP skbs to the BH handler, whenever possible, or at least perform the freeing outside of the socket lock section to decrease cross-CPU allocator work and improve latency. - Add netdevice refcount tracking to locate sources of netdevice and net namespace refcount leaks. - Make Tx watchdog less intrusive - avoid pausing Tx and restarting all queues from a single CPU removing latency spikes. - Various small optimizations throughout the stack from Eric Dumazet. - Make netdev->dev_addr[] constant, force modifications to go via appropriate helpers to allow us to keep addresses in ordered data structures. - Replace unix_table_lock with per-hash locks, improving performance of bind() calls. - Extend skb drop tracepoint with a drop reason. - Allow SO_MARK and SO_PRIORITY setsockopt under CAP_NET_RAW. BPF --- - New helpers: - bpf_find_vma(), find and inspect VMAs for profiling use cases - bpf_loop(), runtime-bounded loop helper trading some execution time for much faster (if at all converging) verification - bpf_strncmp(), improve performance, avoid compiler flakiness - bpf_get_func_arg(), bpf_get_func_ret(), bpf_get_func_arg_cnt() for tracing programs, all inlined by the verifier - Support BPF relocations (CO-RE) in the kernel loader. - Further the support for BTF_TYPE_TAG annotations. - Allow access to local storage in sleepable helpers. - Convert verifier argument types to a composable form with different attributes which can be shared across types (ro, maybe-null). - Prepare libbpf for upcoming v1.0 release by cleaning up APIs, creating new, extensible ones where missing and deprecating those to be removed. Protocols --------- - WiFi (mac80211/cfg80211): - notify user space about long "come back in N" AP responses, allow it to react to such temporary rejections - allow non-standard VHT MCS 10/11 rates - use coarse time in airtime fairness code to save CPU cycles - Bluetooth: - rework of HCI command execution serialization to use a common queue and work struct, and improve handling errors reported in the middle of a batch of commands - rework HCI event handling to use skb_pull_data, avoiding packet parsing pitfalls - support AOSP Bluetooth Quality Report - SMC: - support net namespaces, following the RDMA model - improve connection establishment latency by pre-clearing buffers - introduce TCP ULP for automatic redirection to SMC - Multi-Path TCP: - support ioctls: SIOCINQ, OUTQ, and OUTQNSD - support socket options: IP_TOS, IP_FREEBIND, IP_TRANSPARENT, IPV6_FREEBIND, and IPV6_TRANSPARENT, TCP_CORK and TCP_NODELAY - support cmsgs: TCP_INQ - improvements in the data scheduler (assigning data to subflows) - support fastclose option (quick shutdown of the full MPTCP connection, similar to TCP RST in regular TCP) - MCTP (Management Component Transport) over serial, as defined by DMTF spec DSP0253 - "MCTP Serial Transport Binding". Driver API ---------- - Support timestamping on bond interfaces in active/passive mode. - Introduce generic phylink link mode validation for drivers which don't have any quirks and where MAC capability bits fully express what's supported. Allow PCS layer to participate in the validation. Convert a number of drivers. - Add support to set/get size of buffers on the Rx rings and size of the tx copybreak buffer via ethtool. - Support offloading TC actions as first-class citizens rather than only as attributes of filters, improve sharing and device resource utilization. - WiFi (mac80211/cfg80211): - support forwarding offload (ndo_fill_forward_path) - support for background radar detection hardware - SA Query Procedures offload on the AP side New hardware / drivers ---------------------- - tsnep - FPGA based TSN endpoint Ethernet MAC used in PLCs with real-time requirements for isochronous communication with protocols like OPC UA Pub/Sub. - Qualcomm BAM-DMUX WWAN - driver for data channels of modems integrated into many older Qualcomm SoCs, e.g. MSM8916 or MSM8974 (qcom_bam_dmux). - Microchip LAN966x multi-port Gigabit AVB/TSN Ethernet Switch driver with support for bridging, VLANs and multicast forwarding (lan966x). - iwlmei driver for co-operating between Intel's WiFi driver and Intel's Active Management Technology (AMT) devices. - mse102x - Vertexcom MSE102x Homeplug GreenPHY chips - Bluetooth: - MediaTek MT7921 SDIO devices - Foxconn MT7922A - Realtek RTL8852AE Drivers ------- - Significantly improve performance in the datapaths of: lan78xx, ax88179_178a, lantiq_xrx200, bnxt. - Intel Ethernet NICs: - igb: support PTP/time PEROUT and EXTTS SDP functions on 82580/i354/i350 adapters - ixgbevf: new PF -> VF mailbox API which avoids the risk of mailbox corruption with ESXi - iavf: support configuration of VLAN features of finer granularity, stacked tags and filtering - ice: PTP support for new E822 devices with sub-ns precision - ice: support firmware activation without reboot - Mellanox Ethernet NICs (mlx5): - expose control over IRQ coalescing mode (CQE vs EQE) via ethtool - support TC forwarding when tunnel encap and decap happen between two ports of the same NIC - dynamically size and allow disabling various features to save resources for running in embedded / SmartNIC scenarios - Broadcom Ethernet NICs (bnxt): - use page frag allocator to improve Rx performance - expose control over IRQ coalescing mode (CQE vs EQE) via ethtool - Other Ethernet NICs: - amd-xgbe: add Ryzen 6000 (Yellow Carp) Ethernet support - Microsoft cloud/virtual NIC (mana): - add XDP support (PASS, DROP, TX) - Mellanox Ethernet switches (mlxsw): - initial support for Spectrum-4 ASICs - VxLAN with IPv6 underlay - Marvell Ethernet switches (prestera): - support flower flow templates - add basic IP forwarding support - NXP embedded Ethernet switches (ocelot & felix): - support Per-Stream Filtering and Policing (PSFP) - enable cut-through forwarding between ports by default - support FDMA to improve packet Rx/Tx to CPU - Other embedded switches: - hellcreek: improve trapping management (STP and PTP) packets - qca8k: support link aggregation and port mirroring - Qualcomm 802.11ax WiFi (ath11k): - qca6390, wcn6855: enable 802.11 power save mode in station mode - BSS color change support - WCN6855 hw2.1 support - 11d scan offload support - scan MAC address randomization support - full monitor mode, only supported on QCN9074 - qca6390/wcn6855: report signal and tx bitrate - qca6390: rfkill support - qca6390/wcn6855: regdb.bin support - Intel WiFi (iwlwifi): - support SAR GEO Offset Mapping (SGOM) and Time-Aware-SAR (TAS) in cooperation with the BIOS - support for Optimized Connectivity Experience (OCE) scan - support firmware API version 68 - lots of preparatory work for the upcoming Bz device family - MediaTek WiFi (mt76): - Specific Absorption Rate (SAR) support - mt7921: 160 MHz channel support - RealTek WiFi (rtw88): - Specific Absorption Rate (SAR) support - scan offload - Other WiFi NICs - ath10k: support fetching (pre-)calibration data from nvmem - brcmfmac: configure keep-alive packet on suspend - wcn36xx: beacon filter support" * tag '5.17-net-next' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2048 commits) tcp: tcp_send_challenge_ack delete useless param `skb` net/qla3xxx: Remove useless DMA-32 fallback configuration rocker: Remove useless DMA-32 fallback configuration hinic: Remove useless DMA-32 fallback configuration lan743x: Remove useless DMA-32 fallback configuration net: enetc: Remove useless DMA-32 fallback configuration cxgb4vf: Remove useless DMA-32 fallback configuration cxgb4: Remove useless DMA-32 fallback configuration cxgb3: Remove useless DMA-32 fallback configuration bnx2x: Remove useless DMA-32 fallback configuration et131x: Remove useless DMA-32 fallback configuration be2net: Remove useless DMA-32 fallback configuration vmxnet3: Remove useless DMA-32 fallback configuration bna: Simplify DMA setting net: alteon: Simplify DMA setting myri10ge: Simplify DMA setting qlcnic: Simplify DMA setting net: allwinner: Fix print format page_pool: remove spinlock in page_pool_refill_alloc_cache() amt: fix wrong return type of amt_send_membership_update() ...
2022-01-10Merge tag 'linux-kselftest-kunit-5.17-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull KUnit updates from Shuah Khan: "This consists of several fixes and enhancements. A few highlights: - Option --kconfig_add option allows easily tweaking kunitconfigs - make build subcommand can reconfigure if needed - doesn't error on tests without test plans - doesn't crash if no parameters are generated - defaults --jobs to # of cups - reports test parameter results as (K)TAP subtests" * tag 'linux-kselftest-kunit-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: kunit: tool: Default --jobs to number of CPUs kunit: tool: fix newly introduced typechecker errors kunit: tool: make `build` subcommand also reconfigure if needed kunit: tool: delete kunit_parser.TestResult type kunit: tool: use dataclass instead of collections.namedtuple kunit: tool: suggest using decode_stacktrace.sh on kernel crash kunit: tool: reconfigure when the used kunitconfig changes kunit: tool: revamp message for invalid kunitconfig kunit: tool: add --kconfig_add to allow easily tweaking kunitconfigs kunit: tool: move Kconfig read_from_file/parse_from_string to package-level kunit: tool: print parsed test results fully incrementally kunit: Report test parameter results as (K)TAP subtests kunit: Don't crash if no parameters are generated kunit: tool: Report an error if any test has no subtests kunit: tool: Do not error on tests without test plans kunit: add run_checks.py script to validate kunit changes Documentation: kunit: remove claims that kunit is a mocking framework kunit: tool: fix --json output for skipped tests
2022-01-10Merge tag 'linux-kselftest-next-5.17-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull Kselftest update from Shuah Khan: "Fixes to build errors, false negatives, and several code cleanups, including the ARRAY_SIZE cleanup that removes 25+ duplicates ARRAY_SIZE defines from individual tests" * tag 'linux-kselftest-next-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests/vm: remove ARRAY_SIZE define from individual tests selftests/timens: remove ARRAY_SIZE define from individual tests selftests/sparc64: remove ARRAY_SIZE define from adi-test selftests/seccomp: remove ARRAY_SIZE define from seccomp_benchmark selftests/rseq: remove ARRAY_SIZE define from individual tests selftests/net: remove ARRAY_SIZE define from individual tests selftests/landlock: remove ARRAY_SIZE define from common.h selftests/ir: remove ARRAY_SIZE define from ir_loopback.c selftests/core: remove ARRAY_SIZE define from close_range_test.c selftests/cgroup: remove ARRAY_SIZE define from cgroup_util.h selftests/arm64: remove ARRAY_SIZE define from vec-syscfg.c tools: fix ARRAY_SIZE defines in tools and selftests hdrs selftests: cgroup: build error multiple outpt files selftests/move_mount_set_group remove unneeded conversion to bool selftests/mount: remove unneeded conversion to bool selftests: harness: avoid false negatives if test has no ASSERTs selftests/ftrace: make kprobe profile testcase description unique selftests: clone3: clone3: add case CLONE3_ARGS_NO_TEST selftests: timers: Remove unneeded semicolon kselftests: timers:Remove unneeded semicolon
2022-01-10Merge tag 'seccomp-v5.17-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull seccomp updates from Kees Cook: "The core seccomp code hasn't changed for this cycle, but the selftests were improved while helping to debug the recent signal handling refactoring work Eric did. Summary: - Improve seccomp selftests in support of signal handler refactoring (Kees Cook)" * tag 'seccomp-v5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: selftests/seccomp: Report event mismatches more clearly selftests/seccomp: Stop USER_NOTIF test if kcmp() fails
2022-01-10Merge tag 'x86_sgx_for_v5.17_rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 SGX updates from Borislav Petkov: - Add support for handling hw errors in SGX pages: poisoning, recovering from poison memory and error injection into SGX pages - A bunch of changes to the SGX selftests to simplify and allow of SGX features testing without the need of a whole SGX software stack - Add a sysfs attribute which is supposed to show the amount of SGX memory in a NUMA node, similar to what /proc/meminfo is to normal memory - The usual bunch of fixes and cleanups too * tag 'x86_sgx_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits) x86/sgx: Fix NULL pointer dereference on non-SGX systems selftests/sgx: Fix corrupted cpuid macro invocation x86/sgx: Add an attribute for the amount of SGX memory in a NUMA node x86/sgx: Fix minor documentation issues selftests/sgx: Add test for multiple TCS entry selftests/sgx: Enable multiple thread support selftests/sgx: Add page permission and exception test selftests/sgx: Rename test properties in preparation for more enclave tests selftests/sgx: Provide per-op parameter structs for the test enclave selftests/sgx: Add a new kselftest: Unclobbered_vdso_oversubscribed selftests/sgx: Move setup_test_encl() to each TEST_F() selftests/sgx: Encpsulate the test enclave creation selftests/sgx: Dump segments and /proc/self/maps only on failure selftests/sgx: Create a heap for the test enclave selftests/sgx: Make data measurement for an enclave segment optional selftests/sgx: Assign source for each segment selftests/sgx: Fix a benign linker warning x86/sgx: Add check for SGX pages to ghes_do_memory_failure() x86/sgx: Add hook to error injection address validation x86/sgx: Hook arch_memory_failure() into mainline code ...
2022-01-10Merge tag 'arm64-upstream' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Catalin Marinas: - KCSAN enabled for arm64. - Additional kselftests to exercise the syscall ABI w.r.t. SVE/FPSIMD. - Some more SVE clean-ups and refactoring in preparation for SME support (scalable matrix extensions). - BTI clean-ups (SYM_FUNC macros etc.) - arm64 atomics clean-up and codegen improvements. - HWCAPs for FEAT_AFP (alternate floating point behaviour) and FEAT_RPRESS (increased precision of reciprocal estimate and reciprocal square root estimate). - Use SHA3 instructions to speed-up XOR. - arm64 unwind code refactoring/unification. - Avoid DC (data cache maintenance) instructions when DCZID_EL0.DZP == 1 (potentially set by a hypervisor; user-space already does this). - Perf updates for arm64: support for CI-700, HiSilicon PCIe PMU, Marvell CN10K LLC-TAD PMU, miscellaneous clean-ups. - Other fixes and clean-ups; highlights: fix the handling of erratum 1418040, correct the calculation of the nomap region boundaries, introduce io_stop_wc() mapped to the new DGH instruction (data gathering hint). * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (81 commits) arm64: Use correct method to calculate nomap region boundaries arm64: Drop outdated links in comments arm64: perf: Don't register user access sysctl handler multiple times drivers: perf: marvell_cn10k: fix an IS_ERR() vs NULL check perf/smmuv3: Fix unused variable warning when CONFIG_OF=n arm64: errata: Fix exec handling in erratum 1418040 workaround arm64: Unhash early pointer print plus improve comment asm-generic: introduce io_stop_wc() and add implementation for ARM64 arm64: Ensure that the 'bti' macro is defined where linkage.h is included arm64: remove __dma_*_area() aliases docs/arm64: delete a space from tagged-address-abi arm64: Enable KCSAN kselftest/arm64: Add pidbench for floating point syscall cases arm64/fp: Add comments documenting the usage of state restore functions kselftest/arm64: Add a test program to exercise the syscall ABI kselftest/arm64: Allow signal tests to trigger from a function kselftest/arm64: Parameterise ptrace vector length information arm64/sve: Minor clarification of ABI documentation arm64/sve: Generalise vector length configuration prctl() for SME arm64/sve: Make sysctl interface for SVE reusable by SME ...
2022-01-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Merge in fixes directly in prep for the 5.17 merge window. No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextJakub Kicinski
Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following patchset contains Netfilter updates for net-next. This includes one patch to update ovs and act_ct to use nf_ct_put() instead of nf_conntrack_put(). 1) Add netns_tracker to nfnetlink_log and masquerade, from Eric Dumazet. 2) Remove redundant rcu read-size lock in nf_tables packet path. 3) Replace BUG() by WARN_ON_ONCE() in nft_payload. 4) Consolidate rule verdict tracing. 5) Replace WARN_ON() by WARN_ON_ONCE() in nf_tables core. 6) Make counter support built-in in nf_tables. 7) Add new field to conntrack object to identify locally generated traffic, from Florian Westphal. 8) Prevent NAT from shadowing well-known ports, from Florian Westphal. 9) Merge nf_flow_table_{ipv4,ipv6} into nf_flow_table_inet, also from Florian. 10) Remove redundant pointer in nft_pipapo AVX2 support, from Colin Ian King. 11) Replace opencoded max() in conntrack, from Jiapeng Chong. 12) Update conntrack to use refcount_t API, from Florian Westphal. 13) Move ip_ct_attach indirection into the nf_ct_hook structure. 14) Constify several pointer object in the netfilter codebase, from Florian Westphal. 15) Tree-wide replacement of nf_conntrack_put() by nf_ct_put(), also from Florian. 16) Fix egress splat due to incorrect rcu notation, from Florian. 17) Move stateful fields of connlimit, last, quota, numgen and limit out of the expression data area. 18) Build a blob to represent the ruleset in nf_tables, this is a requirement of the new register tracking infrastructure. 19) Add NFT_REG32_NUM to define the maximum number of 32-bit registers. 20) Add register tracking infrastructure to skip redundant store-to-register operations, this includes support for payload, meta and bitwise expresssions. * git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next: (32 commits) netfilter: nft_meta: cancel register tracking after meta update netfilter: nft_payload: cancel register tracking after payload update netfilter: nft_bitwise: track register operations netfilter: nft_meta: track register operations netfilter: nft_payload: track register operations netfilter: nf_tables: add register tracking infrastructure netfilter: nf_tables: add NFT_REG32_NUM netfilter: nf_tables: add rule blob layout netfilter: nft_limit: move stateful fields out of expression data netfilter: nft_limit: rename stateful structure netfilter: nft_numgen: move stateful fields out of expression data netfilter: nft_quota: move stateful fields out of expression data netfilter: nft_last: move stateful fields out of expression data netfilter: nft_connlimit: move stateful fields out of expression data netfilter: egress: avoid a lockdep splat net: prefer nf_ct_put instead of nf_conntrack_put netfilter: conntrack: avoid useless indirection during conntrack destruction netfilter: make function op structures const netfilter: core: move ip_ct_attach indirection to struct nf_ct_hook netfilter: conntrack: convert to refcount_t api ... ==================== Link: https://lore.kernel.org/r/20220109231640.104123-1-pablo@netfilter.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-09Merge tag 'perf-tools-fixes-for-v5.16-2022-01-09' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - Revert "libtraceevent: Increase libtraceevent logging when verbose", breaks the build with libtraceevent-1.3.0, i.e. when building with 'LIBTRACEEVENT_DYNAMIC=1'. - Avoid early exit in 'perf trace' due to running SIGCHLD handler before it makes sense to. It can happen when using a BPF source code event that have to be first built into an object file. * tag 'perf-tools-fixes-for-v5.16-2022-01-09' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: Revert "libtraceevent: Increase libtraceevent logging when verbose" perf trace: Avoid early exit due to running SIGCHLD handler before it makes sense to
2022-01-07selftests: mptcp: more stable join tests-casesPaolo Abeni
MPTCP join self-tests are a bit fragile as they reply on delays instead of events to catch-up with the expected sockets states. Replace the delay with state checking where possible and reduce the number of sleeps in the most complex scenarios. This will both reduce the tests run-time and will improve stability. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-07Revert "libtraceevent: Increase libtraceevent logging when verbose"Arnaldo Carvalho de Melo
This reverts commit 08efcb4a638d260ef7fcbae64ecf7ceceb3f1841. This breaks the build as it will prefer using libbpf-devel header files, even when not using LIBBPF_DYNAMIC=1, breaking the build. This was detected on OpenSuSE Tumbleweed with libtraceevent-devel 1.3.0, as described by Jiri Slaby: ======================================================================= It breaks build with LIBTRACEEVENT_DYNAMIC and version 1.3.0: > util/debug.c: In function ‘perf_debug_option’: > util/debug.c:243:17: error: implicit declaration of function ‘tep_set_loglevel’ [-Werror=implicit-function-declaration] > 243 | tep_set_loglevel(TEP_LOG_INFO); > | ^~~~~~~~~~~~~~~~ > util/debug.c:243:34: error: ‘TEP_LOG_INFO’ undeclared (first use in this function); did you mean ‘TEP_PRINT_INFO’? > 243 | tep_set_loglevel(TEP_LOG_INFO); > | ^~~~~~~~~~~~ > | TEP_PRINT_INFO > util/debug.c:243:34: note: each undeclared identifier is reported only once for each function it appears in > util/debug.c:245:34: error: ‘TEP_LOG_DEBUG’ undeclared (first use in this function) > 245 | tep_set_loglevel(TEP_LOG_DEBUG); > | ^~~~~~~~~~~~~ > util/debug.c:247:34: error: ‘TEP_LOG_ALL’ undeclared (first use in this function) > 247 | tep_set_loglevel(TEP_LOG_ALL); > | ^~~~~~~~~~~ It is because the gcc's command line looks like: gcc ... -I/home/abuild/rpmbuild/BUILD/tools/lib/ ... -DLIBTRACEEVENT_VERSION=65790 ... ======================================================================= The proper way to fix this is more involved and so not suitable for this late in the 5.16-rc stage. Reported-by: Jiri Slaby <jirislaby@kernel.org> Link: https://lore.kernel.org/lkml/bc2b0786-8965-1bcd-2316-9d9bb37b9c31@kernel.org Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Song Liu <songliubraving@fb.com> Cc: Steven Rostedt <rostedt@goodmis.org> Link: https://lore.kernel.org/lkml/YddGjjmlMZzxUZbN@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-01-07perf trace: Avoid early exit due to running SIGCHLD handler before it makes ↵Jiri Olsa
sense to When running 'perf trace' with an BPF object like: # perf trace -e openat,tools/perf/examples/bpf/hello.c the event parsing eventually calls llvm__get_kbuild_opts() that runs a script and that ends up with SIGCHLD delivered to the 'perf trace' handler, which assumes the workload process is done and quits 'perf trace'. Move the SIGCHLD handler setup directly to trace__run(), where the event is parsed and the object is already compiled. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Christy Lee <christyc.y.lee@gmail.com> Cc: Ian Rogers <irogers@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20220106222030.227499-1-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-01-07selftests: mptcp: add tests for subflow creation failurePaolo Abeni
Verify that, when multiple endpoints are available, subflows creation proceed even when the first additional subflow creation fails - due to packet drop on the relevant link Co-developed-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-07mptcp: keep track of local endpoint still available for each mskPaolo Abeni
Include into the path manager status a bitmap tracking the list of local endpoints still available - not yet used - for the relevant mptcp socket. Keep such map updated at endpoint creation/deletion time, so that we can easily skip already used endpoint at local address selection time. The endpoint used by the initial subflow is lazyly accounted at subflow creation time: the usage bitmap is be up2date before endpoint selection and we avoid such unneeded task in some relevant scenarios - e.g. busy servers accepting incoming subflows but not creating any additional ones nor annuncing additional addresses. Overall this allows for fair local endpoints usage in case of subflow failure. As a side effect, this patch also enforces that each endpoint is used at most once for each mptcp connection. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-07selftests: mptcp: add disconnect testsPaolo Abeni
Performs several disconnect/reconnect on the same socket, ensuring the overall transfer is succesful. The new test leverages ioctl(SIOCOUTQ) to ensure all the pending data is acked before disconnecting. Additionally order alphabetically the test program arguments list for better maintainability. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfJakub Kicinski
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Refcount leak in ipt_CLUSTERIP rule loading path, from Xin Xiong. 2) Use socat in netfilter selftests, from Hangbin Liu. 3) Skip layer checksum 4 update for IP fragments. 4) Missing allocation of pcpu scratch maps on clone in nft_set_pipapo, from Florian Westphal. * git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf: netfilter: nft_set_pipapo: allocate pcpu scratch maps on clone netfilter: nft_payload: do not update layer 4 checksum when mangling fragments selftests: netfilter: switch to socat for tests using -q option netfilter: ipt_CLUSTERIP: fix refcount leak in clusterip_tg_check() ==================== Link: https://lore.kernel.org/r/20220106215139.170824-1-pablo@netfilter.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-06Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski
Alexei Starovoitov says: ==================== pull-request: bpf-next 2022-01-06 We've added 41 non-merge commits during the last 2 day(s) which contain a total of 36 files changed, 1214 insertions(+), 368 deletions(-). The main changes are: 1) Various fixes in the verifier, from Kris and Daniel. 2) Fixes in sockmap, from John. 3) bpf_getsockopt fix, from Kuniyuki. 4) INET_POST_BIND fix, from Menglong. 5) arm64 JIT fix for bpf pseudo funcs, from Hou. 6) BPF ISA doc improvements, from Christoph. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (41 commits) bpf: selftests: Add bind retry for post_bind{4, 6} bpf: selftests: Use C99 initializers in test_sock.c net: bpf: Handle return value of BPF_CGROUP_RUN_PROG_INET{4,6}_POST_BIND() bpf/selftests: Test bpf_d_path on rdonly_mem. libbpf: Add documentation for bpf_map batch operations selftests/bpf: Don't rely on preserving volatile in PT_REGS macros in loop3 xdp: Add xdp_do_redirect_frame() for pre-computed xdp_frames xdp: Move conversion to xdp_frame out of map functions page_pool: Store the XDP mem id page_pool: Add callback to init pages when they are allocated xdp: Allow registering memory model without rxq reference samples/bpf: xdpsock: Add timestamp for Tx-only operation samples/bpf: xdpsock: Add time-out for cleaning Tx samples/bpf: xdpsock: Add sched policy and priority support samples/bpf: xdpsock: Add cyclic TX operation capability samples/bpf: xdpsock: Add clockid selection support samples/bpf: xdpsock: Add Dest and Src MAC setting for Tx-only operation samples/bpf: xdpsock: Add VLAN support for Tx-only operation libbpf 1.0: Deprecate bpf_object__find_map_by_offset() API libbpf 1.0: Deprecate bpf_map__is_offload_neutral() ... ==================== Link: https://lore.kernel.org/r/20220107013626.53943-1-alexei.starovoitov@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-04-04 17:26:55 +0000