From 07134a365f1c4be6e840a00ae452d1593f15c5fc Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Wed, 5 Mar 2014 14:25:50 +0100 Subject: ARM: dts: imx6: add PCIe interrupt mapping properties As defined by the common PCI bindings. Signed-off-by: Lucas Stach Acked-by: Arnd Bergmann Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 55cb926fa3f7..e27408f5371f 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -10,6 +10,8 @@ * http://www.gnu.org/copyleft/gpl.html */ +#include + #include "skeleton.dtsi" / { @@ -138,6 +140,12 @@ 0x82000000 0 0x01000000 0x01000000 0 0x00f00000>; /* non-prefetchable memory */ num-lanes = <1>; interrupts = <0 123 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 2 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 3 &intc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, + <0 0 0 4 &intc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks 189>, <&clks 187>, <&clks 206>, <&clks 144>; clock-names = "pcie_ref_125m", "sata_ref_100m", "lvds_gate", "pcie_axi"; status = "disabled"; -- cgit v1.2.3 From 2b33319003bfd97decd9b4768ecfe70a6dfdba53 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Fri, 28 Mar 2014 02:09:13 -0300 Subject: ARM: dts: imx53-qsb-common: Fix memory region description On mx53qsb there are two DRAM chip selects: CS0 at 0x70000000 CS1 at 0xb0000000 Each bank has a 512MB DRAM, giving a total of 1GB of system DRAM. Fix the memory layout to describe the hardware appropriately. Signed-off-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx53-qsb-common.dtsi | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/imx53-qsb-common.dtsi b/arch/arm/boot/dts/imx53-qsb-common.dtsi index 3f825a6813da..ede04fa4161f 100644 --- a/arch/arm/boot/dts/imx53-qsb-common.dtsi +++ b/arch/arm/boot/dts/imx53-qsb-common.dtsi @@ -14,7 +14,8 @@ / { memory { - reg = <0x70000000 0x40000000>; + reg = <0x70000000 0x20000000>, + <0xb0000000 0x20000000>; }; display0: display@di0 { -- cgit v1.2.3 From 8668d49896cc19354917ff67503e72f3f48ffaaa Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Fri, 28 Mar 2014 02:09:14 -0300 Subject: ARM: dts: imx53-m53evk: Fix memory region description On m53evk there are two DRAM chip selects: CS0 at 0x70000000 CS1 at 0xb0000000 Each bank has a 512MB DRAM, giving a total of 1GB of system DRAM. Fix the memory layout to describe the hardware appropriately. Signed-off-by: Fabio Estevam Acked-by: Marek Vasut Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx53-m53evk.dts | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/imx53-m53evk.dts b/arch/arm/boot/dts/imx53-m53evk.dts index f6d3ac3e5587..7fa2d1b5d60e 100644 --- a/arch/arm/boot/dts/imx53-m53evk.dts +++ b/arch/arm/boot/dts/imx53-m53evk.dts @@ -17,7 +17,8 @@ compatible = "denx,imx53-m53evk", "fsl,imx53"; memory { - reg = <0x70000000 0x20000000>; + reg = <0x70000000 0x20000000>, + <0xb0000000 0x20000000>; }; soc { -- cgit v1.2.3 From 7b6b2f4bf76e72d0599bd0d4ca1c850f8308d50f Mon Sep 17 00:00:00 2001 From: Stefan Agner Date: Wed, 2 Apr 2014 19:05:37 +0200 Subject: ARM: dts: mx5: fix wrong stmpe-ts bindings Fix bindings for STMPE touchscreen controller to match the documented bindings and the actual bindings used by the driver. Signed-off-by: Stefan Agner Reviewed-by: Marek Vasut Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx53-m53evk.dts | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/arch/arm/boot/dts/imx53-m53evk.dts b/arch/arm/boot/dts/imx53-m53evk.dts index 7fa2d1b5d60e..d5d146a8b149 100644 --- a/arch/arm/boot/dts/imx53-m53evk.dts +++ b/arch/arm/boot/dts/imx53-m53evk.dts @@ -194,17 +194,17 @@ irq-trigger = <0x1>; stmpe_touchscreen { - compatible = "stmpe,ts"; + compatible = "st,stmpe-ts"; reg = <0>; - ts,sample-time = <4>; - ts,mod-12b = <1>; - ts,ref-sel = <0>; - ts,adc-freq = <1>; - ts,ave-ctrl = <3>; - ts,touch-det-delay = <3>; - ts,settling = <4>; - ts,fraction-z = <7>; - ts,i-drive = <1>; + st,sample-time = <4>; + st,mod-12b = <1>; + st,ref-sel = <0>; + st,adc-freq = <1>; + st,ave-ctrl = <3>; + st,touch-det-delay = <3>; + st,settling = <4>; + st,fraction-z = <7>; + st,i-drive = <1>; }; }; -- cgit v1.2.3 From 54e8eaeec1227a024373e37315770cc79d69917b Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Fri, 28 Mar 2014 17:25:51 +0100 Subject: ARM: dts: imx: drop invalid size and address cells properties Those two properties should have been set to zero, which is the same as not specifying them. Having address-cells set to 1 causes OF interrupt mapping routines to add 1 to the interrupt-cells property and as result fail because all calculations are off by one. Signed-off-by: Lucas Stach Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl.dtsi | 2 -- arch/arm/boot/dts/imx6sl.dtsi | 2 -- 2 files changed, 4 deletions(-) diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index e27408f5371f..2d04a5185fe9 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -48,8 +48,6 @@ intc: interrupt-controller@00a01000 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; - #address-cells = <1>; - #size-cells = <1>; interrupt-controller; reg = <0x00a01000 0x1000>, <0x00a00100 0x100>; diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index 3cb4941afeef..d92df0ab02e4 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -68,8 +68,6 @@ intc: interrupt-controller@00a01000 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; - #address-cells = <1>; - #size-cells = <1>; interrupt-controller; reg = <0x00a01000 0x1000>, <0x00a00100 0x100>; -- cgit v1.2.3 From c2bece3cb1215bdb68f2345f6a9b5d0b27c8724e Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Fri, 28 Mar 2014 17:52:52 +0100 Subject: ARM: imx6q-clk: parent lvds_gate from lvds_sel Allows fror proper refcounting of the parent clocks when enabling the clock output on CLK1/2 pads. Signed-off-by: Lucas Stach Reviewed-by: Marek Vasut Acked-by: Richard Zhu Signed-off-by: Shawn Guo --- arch/arm/mach-imx/clk-imx6q.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index b0e7f9d2c245..3ed67b592b48 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -208,8 +208,8 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) * the "output_enable" bit as a gate, even though it's really just * enabling clock output. */ - clk[lvds1_gate] = imx_clk_gate("lvds1_gate", "dummy", base + 0x160, 10); - clk[lvds2_gate] = imx_clk_gate("lvds2_gate", "dummy", base + 0x160, 11); + clk[lvds1_gate] = imx_clk_gate("lvds1_gate", "lvds1_sel", base + 0x160, 10); + clk[lvds2_gate] = imx_clk_gate("lvds2_gate", "lvds2_sel", base + 0x160, 11); /* name parent_name reg idx */ clk[pll2_pfd0_352m] = imx_clk_pfd("pll2_pfd0_352m", "pll2_bus", base + 0x100, 0); -- cgit v1.2.3 From 2e3b9650561ae791ca0bd8c5f4868ef4df3cb842 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 6 Apr 2014 23:32:25 +0100 Subject: ARM: dt: microsom: don't set bit 7 for ethernet mux settings Bit 6,7 are marked as reserved for the ethernet RGMII pins, so avoid setting these bits. Signed-off-by: Russell King Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) diff --git a/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi b/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi index a3cb2fff8f61..d16066608e21 100644 --- a/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi +++ b/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi @@ -26,25 +26,25 @@ /* GPIO16 -> AR8035 25MHz */ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0xc0000000 MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x80000000 - MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 - MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 - MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 - MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 - MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 /* AR8035 CLK_25M --> ENET_REF_CLK (V22) */ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x0a0b1 /* AR8035 pin strapping: IO voltage: pull up */ - MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 /* AR8035 pin strapping: PHYADDR#0: pull down */ - MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x130b0 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x13030 /* AR8035 pin strapping: PHYADDR#1: pull down */ - MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x130b0 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x13030 /* AR8035 pin strapping: MODE#1: pull up */ - MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 /* AR8035 pin strapping: MODE#3: pull up */ - MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 /* AR8035 pin strapping: MODE#0: pull down */ - MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x130b0 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x13030 /* * As the RMII pins are also connected to RGMII -- cgit v1.2.3 From 19f7cb6dec7408da8753bf3250098edab60cdbb6 Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Mon, 7 Apr 2014 16:29:24 +0200 Subject: ARM: dts: imx6: edmqmx6: Fix usbotg id pin Signed-off-by: Lucas Stach Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts index a63bbb3d46bb..39ffa766384f 100644 --- a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts +++ b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts @@ -293,7 +293,7 @@ pinctrl_usbotg: usbotggrp { fsl,pins = < - MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 >; }; -- cgit v1.2.3 From 465ca5dc4ad57b40ea632aabb32bf81a66632c4a Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Mon, 7 Apr 2014 16:29:25 +0200 Subject: ARM: dts: imx6: edmqmx6: Do not use the OTG switch as VBUS regulator GPIO7_12 switches the D+/D- USB lines on and off. When we use this as VBUS regulator it means that USB device mode can never work as VBUS is never turned on in Device mode. Signed-off-by: Sascha Hauer Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts index 39ffa766384f..af32944cf9ae 100644 --- a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts +++ b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts @@ -40,13 +40,15 @@ regulator-always-on; }; - reg_usb_otg_vbus: regulator@1 { + reg_usb_otg_switch: regulator@1 { compatible = "regulator-fixed"; reg = <1>; - regulator-name = "usb_otg_vbus"; + regulator-name = "usb_otg_switch"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; gpio = <&gpio7 12 0>; + regulator-boot-on; + regulator-always-on; }; reg_usb_host1: regulator@2 { @@ -348,7 +350,6 @@ }; &usbotg { - vbus-supply = <®_usb_otg_vbus>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usbotg>; disable-over-current; -- cgit v1.2.3 From 8dde78e8d62ac5b5b8c07cd965928536c3556bc0 Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Mon, 7 Apr 2014 16:29:26 +0200 Subject: ARM: dts: imx6: edmqmx6: USB H1 only supports host mode Signed-off-by: Lucas Stach Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts index af32944cf9ae..e7762e456cbe 100644 --- a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts +++ b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts @@ -346,6 +346,7 @@ &usbh1 { vbus-supply = <®_usb_host1>; disable-over-current; + dr_mode = "host"; status = "okay"; }; -- cgit v1.2.3 From 52d13453df9aef536da6b93c7253fd618292a1cf Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Mon, 7 Apr 2014 16:29:27 +0200 Subject: ARM: dts: imx6: edmqmx6: add second STMPE Signed-off-by: Lucas Stach Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts | 38 +++++++++++++++++++++++++-------- 1 file changed, 29 insertions(+), 9 deletions(-) diff --git a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts index e7762e456cbe..e4ae38fd0269 100644 --- a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts +++ b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts @@ -19,7 +19,10 @@ compatible = "dmo,imx6q-edmqmx6", "fsl,imx6q"; aliases { - gpio7 = &stmpe_gpio; + gpio7 = &stmpe_gpio1; + gpio8 = &stmpe_gpio2; + stmpe-i2c0 = &stmpe1; + stmpe-i2c1 = &stmpe2; }; memory { @@ -67,23 +70,23 @@ led-blue { label = "blue"; - gpios = <&stmpe_gpio 8 GPIO_ACTIVE_HIGH>; + gpios = <&stmpe_gpio1 8 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; led-green { label = "green"; - gpios = <&stmpe_gpio 9 GPIO_ACTIVE_HIGH>; + gpios = <&stmpe_gpio1 9 GPIO_ACTIVE_HIGH>; }; led-pink { label = "pink"; - gpios = <&stmpe_gpio 10 GPIO_ACTIVE_HIGH>; + gpios = <&stmpe_gpio1 10 GPIO_ACTIVE_HIGH>; }; led-red { label = "red"; - gpios = <&stmpe_gpio 11 GPIO_ACTIVE_HIGH>; + gpios = <&stmpe_gpio1 11 GPIO_ACTIVE_HIGH>; }; }; }; @@ -101,7 +104,8 @@ clock-frequency = <100000>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2 - &pinctrl_stmpe>; + &pinctrl_stmpe1 + &pinctrl_stmpe2>; status = "okay"; pmic: pfuze100@08 { @@ -207,13 +211,25 @@ }; }; - stmpe: stmpe1601@40 { + stmpe1: stmpe1601@40 { compatible = "st,stmpe1601"; reg = <0x40>; interrupts = <30 0>; interrupt-parent = <&gpio3>; - stmpe_gpio: stmpe_gpio { + stmpe_gpio1: stmpe_gpio { + #gpio-cells = <2>; + compatible = "st,stmpe-gpio"; + }; + }; + + stmpe2: stmpe1601@44 { + compatible = "st,stmpe1601"; + reg = <0x44>; + interrupts = <2 0>; + interrupt-parent = <&gpio5>; + + stmpe_gpio2: stmpe_gpio { #gpio-cells = <2>; compatible = "st,stmpe-gpio"; }; @@ -275,10 +291,14 @@ >; }; - pinctrl_stmpe: stmpegrp { + pinctrl_stmpe1: stmpe1grp { fsl,pins = ; }; + pinctrl_stmpe2: stmpe2grp { + fsl,pins = ; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 -- cgit v1.2.3 From 0c658c48cbe952d2689211a09f456d7319e59b33 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Thu, 10 Apr 2014 15:14:14 +0800 Subject: ARM: dts: imx53-tx53: add IPU DI ports and endpoints MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit With the recent imx-drm device tree binding changes, we need to add IPU DI ports and endpoints for adapting. Signed-off-by: Shawn Guo Acked-by: Lothar Waßmann --- arch/arm/boot/dts/imx53-tx53-x03x.dts | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/imx53-tx53-x03x.dts b/arch/arm/boot/dts/imx53-tx53-x03x.dts index 0217dde3b36b..3b73e81dc3f0 100644 --- a/arch/arm/boot/dts/imx53-tx53-x03x.dts +++ b/arch/arm/boot/dts/imx53-tx53-x03x.dts @@ -25,12 +25,17 @@ soc { display: display@di0 { compatible = "fsl,imx-parallel-display"; - crtcs = <&ipu 0>; interface-pix-fmt = "rgb24"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rgb24_vga1>; status = "okay"; + port { + display0_in: endpoint { + remote-endpoint = <&ipu_di0_disp0>; + }; + }; + display-timings { VGA { clock-frequency = <25200000>; @@ -293,6 +298,10 @@ }; }; +&ipu_di0_disp0 { + remote-endpoint = <&display0_in>; +}; + &kpp { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_kpp>; -- cgit v1.2.3 From 139412290de46a7d4ff3359c8989485840764572 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Thu, 10 Apr 2014 15:22:56 +0800 Subject: ARM: dts: imx6q-gw5xxx: remove dead 'crtcs' property Since commit (655b43c staging: imx-drm-core: Use OF graph to find components and connections between encoder and crtcs), 'crtcs' becomes a dead property. Remove it. Signed-off-by: Shawn Guo Acked-by: Tim Harvey --- arch/arm/boot/dts/imx6q-gw5400-a.dts | 3 --- arch/arm/boot/dts/imx6qdl-gw52xx.dtsi | 3 --- 2 files changed, 6 deletions(-) diff --git a/arch/arm/boot/dts/imx6q-gw5400-a.dts b/arch/arm/boot/dts/imx6q-gw5400-a.dts index 902f98310481..e51bb3f0fd56 100644 --- a/arch/arm/boot/dts/imx6q-gw5400-a.dts +++ b/arch/arm/boot/dts/imx6q-gw5400-a.dts @@ -487,9 +487,6 @@ &ldb { status = "okay"; - lvds-channel@0 { - crtcs = <&ipu1 0>, <&ipu1 1>, <&ipu2 0>, <&ipu2 1>; - }; }; &pcie { diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi index 8e99c9a9bc76..035d3a85c318 100644 --- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi @@ -436,9 +436,6 @@ &ldb { status = "okay"; - lvds-channel@0 { - crtcs = <&ipu1 0>, <&ipu1 1>; - }; }; &pcie { -- cgit v1.2.3 From fa1746ae3829ed8865a10a7fe3946ef91bddd458 Mon Sep 17 00:00:00 2001 From: Lothar Waßmann Date: Thu, 10 Apr 2014 10:03:40 +0200 Subject: ARM: dts: imx53: fix apparent copy/paste error MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The 'remote-endpoint' property should point back to ipu_di1_lvds1 rather than ipu_di0_lvds0. Signed-off-by: Lothar Waßmann Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx53.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index b57ab57740f6..a99b64bfb046 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -430,7 +430,7 @@ port { lvds1_in: endpoint { - remote-endpoint = <&ipu_di0_lvds0>; + remote-endpoint = <&ipu_di1_lvds1>; }; }; }; -- cgit v1.2.3 From 2cd36711e2b9714c0bb500b4060714666f37ca2c Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Fri, 11 Apr 2014 09:09:39 -0300 Subject: ARM: dts: imx6sl-evk: Add an entry for MX6SL_PAD_ECSPI1_SS0__GPIO4_IO11 In case the bootloader has incorrectly configured the ALT mode of MX6SL_PAD_ECSPI1_SS0 pad, we end up with the following probe error: m25p80 spi0.0: found mr25h256, expected m25p32 m25p80 spi0.0: mr25h256 (32 Kbytes) In order to avoid this issue, add an entry for MX6SL_PAD_ECSPI1_SS0 pad, so that kernel configures the ECSPI chip select as GPIO functionality, which results in correct SPI NOR probe. Signed-off-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6sl-evk.dts | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts index 864d8dfb51ca..a8d9a93fab85 100644 --- a/arch/arm/boot/dts/imx6sl-evk.dts +++ b/arch/arm/boot/dts/imx6sl-evk.dts @@ -282,6 +282,7 @@ MX6SL_PAD_ECSPI1_MISO__ECSPI1_MISO 0x100b1 MX6SL_PAD_ECSPI1_MOSI__ECSPI1_MOSI 0x100b1 MX6SL_PAD_ECSPI1_SCLK__ECSPI1_SCLK 0x100b1 + MX6SL_PAD_ECSPI1_SS0__GPIO4_IO11 0x80000000 >; }; -- cgit v1.2.3 From 308965f94d00b670ca3a0f799839a68412da34d9 Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Fri, 11 Apr 2014 16:59:38 +0200 Subject: ARM: dts: vybrid: drop address and size cells from GIC node This is likely a copy-and-paste error from the ARM GIC documentation, that has already been fixed. address-cells should have been set to 0, as with the size cells. As having those properties set to 0 is the same thing as not specifying them, drop them completely. Signed-off-by: Lucas Stach Acked-by: Rob Herring Signed-off-by: Shawn Guo --- arch/arm/boot/dts/vf610.dtsi | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/arm/boot/dts/vf610.dtsi b/arch/arm/boot/dts/vf610.dtsi index 804873367669..bb78e901ed5d 100644 --- a/arch/arm/boot/dts/vf610.dtsi +++ b/arch/arm/boot/dts/vf610.dtsi @@ -72,8 +72,6 @@ intc: interrupt-controller@40002000 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; - #address-cells = <1>; - #size-cells = <1>; interrupt-controller; reg = <0x40003000 0x1000>, <0x40002100 0x100>; -- cgit v1.2.3 From 4b2b404309f90e1ba12b0b187ca2490be19a22a6 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Fri, 11 Apr 2014 09:56:46 +0800 Subject: ARM: dts: imx: add required #clock-cells for fixed-clock Per bindings of fixed-clock, #clock-cells is a required property. Let's add it for those fixed rate clocks. Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx25.dtsi | 1 + arch/arm/boot/dts/imx27-apf27.dts | 1 + arch/arm/boot/dts/imx27.dtsi | 1 + arch/arm/boot/dts/imx50.dtsi | 4 ++++ arch/arm/boot/dts/imx51.dtsi | 4 ++++ arch/arm/boot/dts/imx53.dtsi | 4 ++++ arch/arm/boot/dts/imx6qdl.dtsi | 3 +++ arch/arm/boot/dts/imx6sl.dtsi | 2 ++ arch/arm/boot/dts/vf610-twr.dts | 2 ++ arch/arm/boot/dts/vf610.dtsi | 2 ++ 10 files changed, 24 insertions(+) diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi index 32f760e24898..ea323f09dc78 100644 --- a/arch/arm/boot/dts/imx25.dtsi +++ b/arch/arm/boot/dts/imx25.dtsi @@ -56,6 +56,7 @@ osc { compatible = "fsl,imx-osc", "fixed-clock"; + #clock-cells = <0>; clock-frequency = <24000000>; }; }; diff --git a/arch/arm/boot/dts/imx27-apf27.dts b/arch/arm/boot/dts/imx27-apf27.dts index 09f57b39e3ef..73aae4f5e539 100644 --- a/arch/arm/boot/dts/imx27-apf27.dts +++ b/arch/arm/boot/dts/imx27-apf27.dts @@ -29,6 +29,7 @@ osc26m { compatible = "fsl,imx-osc26m", "fixed-clock"; + #clock-cells = <0>; clock-frequency = <0>; }; }; diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi index 6279e0b4f768..137e010eab35 100644 --- a/arch/arm/boot/dts/imx27.dtsi +++ b/arch/arm/boot/dts/imx27.dtsi @@ -48,6 +48,7 @@ osc26m { compatible = "fsl,imx-osc26m", "fixed-clock"; + #clock-cells = <0>; clock-frequency = <26000000>; }; }; diff --git a/arch/arm/boot/dts/imx50.dtsi b/arch/arm/boot/dts/imx50.dtsi index 0c75fe3deb35..9c89d1ca97c2 100644 --- a/arch/arm/boot/dts/imx50.dtsi +++ b/arch/arm/boot/dts/imx50.dtsi @@ -53,21 +53,25 @@ ckil { compatible = "fsl,imx-ckil", "fixed-clock"; + #clock-cells = <0>; clock-frequency = <32768>; }; ckih1 { compatible = "fsl,imx-ckih1", "fixed-clock"; + #clock-cells = <0>; clock-frequency = <22579200>; }; ckih2 { compatible = "fsl,imx-ckih2", "fixed-clock"; + #clock-cells = <0>; clock-frequency = <0>; }; osc { compatible = "fsl,imx-osc", "fixed-clock"; + #clock-cells = <0>; clock-frequency = <24000000>; }; }; diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index 5f8216d08f6b..150bb4e2f744 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -50,21 +50,25 @@ ckil { compatible = "fsl,imx-ckil", "fixed-clock"; + #clock-cells = <0>; clock-frequency = <32768>; }; ckih1 { compatible = "fsl,imx-ckih1", "fixed-clock"; + #clock-cells = <0>; clock-frequency = <0>; }; ckih2 { compatible = "fsl,imx-ckih2", "fixed-clock"; + #clock-cells = <0>; clock-frequency = <0>; }; osc { compatible = "fsl,imx-osc", "fixed-clock"; + #clock-cells = <0>; clock-frequency = <24000000>; }; }; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index a99b64bfb046..9c2bff2252d0 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -70,21 +70,25 @@ ckil { compatible = "fsl,imx-ckil", "fixed-clock"; + #clock-cells = <0>; clock-frequency = <32768>; }; ckih1 { compatible = "fsl,imx-ckih1", "fixed-clock"; + #clock-cells = <0>; clock-frequency = <22579200>; }; ckih2 { compatible = "fsl,imx-ckih2", "fixed-clock"; + #clock-cells = <0>; clock-frequency = <0>; }; osc { compatible = "fsl,imx-osc", "fixed-clock"; + #clock-cells = <0>; clock-frequency = <24000000>; }; }; diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 2d04a5185fe9..eca0971d4db1 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -59,16 +59,19 @@ ckil { compatible = "fsl,imx-ckil", "fixed-clock"; + #clock-cells = <0>; clock-frequency = <32768>; }; ckih1 { compatible = "fsl,imx-ckih1", "fixed-clock"; + #clock-cells = <0>; clock-frequency = <0>; }; osc { compatible = "fsl,imx-osc", "fixed-clock"; + #clock-cells = <0>; clock-frequency = <24000000>; }; }; diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index d92df0ab02e4..d26b099260a3 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -79,11 +79,13 @@ ckil { compatible = "fixed-clock"; + #clock-cells = <0>; clock-frequency = <32768>; }; osc { compatible = "fixed-clock"; + #clock-cells = <0>; clock-frequency = <24000000>; }; }; diff --git a/arch/arm/boot/dts/vf610-twr.dts b/arch/arm/boot/dts/vf610-twr.dts index 7dd1d6ede525..ded361075aab 100644 --- a/arch/arm/boot/dts/vf610-twr.dts +++ b/arch/arm/boot/dts/vf610-twr.dts @@ -25,11 +25,13 @@ clocks { audio_ext { compatible = "fixed-clock"; + #clock-cells = <0>; clock-frequency = <24576000>; }; enet_ext { compatible = "fixed-clock"; + #clock-cells = <0>; clock-frequency = <50000000>; }; }; diff --git a/arch/arm/boot/dts/vf610.dtsi b/arch/arm/boot/dts/vf610.dtsi index bb78e901ed5d..b8ce0aa7b157 100644 --- a/arch/arm/boot/dts/vf610.dtsi +++ b/arch/arm/boot/dts/vf610.dtsi @@ -45,11 +45,13 @@ sxosc { compatible = "fixed-clock"; + #clock-cells = <0>; clock-frequency = <32768>; }; fxosc { compatible = "fixed-clock"; + #clock-cells = <0>; clock-frequency = <24000000>; }; }; -- cgit v1.2.3 From 17b9b3b9e88ac6564689283a08034faf2c048fdb Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Mon, 14 Apr 2014 16:20:39 +0200 Subject: ARM: imx6q: clk: Parent DI clocks to video PLL via di_pre_sel Route the video PLL to the display interface clocks via the di_pre_sel and di_sel muxes by default. Signed-off-by: Sascha Hauer Signed-off-by: Philipp Zabel Tested-by: Russell King Signed-off-by: Shawn Guo --- arch/arm/mach-imx/clk-imx6q.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index 3ed67b592b48..4a6fb65589fa 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -445,6 +445,15 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) clk_set_parent(clk[ldb_di1_sel], clk[pll5_video_div]); } + clk_set_parent(clk[ipu1_di0_pre_sel], clk[pll5_video_div]); + clk_set_parent(clk[ipu1_di1_pre_sel], clk[pll5_video_div]); + clk_set_parent(clk[ipu2_di0_pre_sel], clk[pll5_video_div]); + clk_set_parent(clk[ipu2_di1_pre_sel], clk[pll5_video_div]); + clk_set_parent(clk[ipu1_di0_sel], clk[ipu1_di0_pre]); + clk_set_parent(clk[ipu1_di1_sel], clk[ipu1_di1_pre]); + clk_set_parent(clk[ipu2_di0_sel], clk[ipu2_di0_pre]); + clk_set_parent(clk[ipu2_di1_sel], clk[ipu2_di1_pre]); + /* * The gpmi needs 100MHz frequency in the EDO/Sync mode, * We can not get the 100MHz from the pll2_pfd0_352m. -- cgit v1.2.3 From 4591b13289b54fb5cbce84ee170f7390c576ef8f Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Mon, 14 Apr 2014 16:20:40 +0200 Subject: ARM: i.MX6: ipu_di_sel clocks can set parent rates To obtain exact pixel clocks, allow the DI clock selectors to influence the PLLs that they are derived from. Signed-off-by: Philipp Zabel Tested-by: Russell King Signed-off-by: Shawn Guo --- arch/arm/mach-imx/clk-imx6q.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index 4a6fb65589fa..2b4d6acfa34a 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -258,14 +258,14 @@ static void __init imx6q_clocks_init(struct device_node *ccm_node) clk[ipu2_sel] = imx_clk_mux("ipu2_sel", base + 0x3c, 14, 2, ipu_sels, ARRAY_SIZE(ipu_sels)); clk[ldb_di0_sel] = imx_clk_mux_flags("ldb_di0_sel", base + 0x2c, 9, 3, ldb_di_sels, ARRAY_SIZE(ldb_di_sels), CLK_SET_RATE_PARENT); clk[ldb_di1_sel] = imx_clk_mux_flags("ldb_di1_sel", base + 0x2c, 12, 3, ldb_di_sels, ARRAY_SIZE(ldb_di_sels), CLK_SET_RATE_PARENT); - clk[ipu1_di0_pre_sel] = imx_clk_mux("ipu1_di0_pre_sel", base + 0x34, 6, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels)); - clk[ipu1_di1_pre_sel] = imx_clk_mux("ipu1_di1_pre_sel", base + 0x34, 15, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels)); - clk[ipu2_di0_pre_sel] = imx_clk_mux("ipu2_di0_pre_sel", base + 0x38, 6, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels)); - clk[ipu2_di1_pre_sel] = imx_clk_mux("ipu2_di1_pre_sel", base + 0x38, 15, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels)); - clk[ipu1_di0_sel] = imx_clk_mux("ipu1_di0_sel", base + 0x34, 0, 3, ipu1_di0_sels, ARRAY_SIZE(ipu1_di0_sels)); - clk[ipu1_di1_sel] = imx_clk_mux("ipu1_di1_sel", base + 0x34, 9, 3, ipu1_di1_sels, ARRAY_SIZE(ipu1_di1_sels)); - clk[ipu2_di0_sel] = imx_clk_mux("ipu2_di0_sel", base + 0x38, 0, 3, ipu2_di0_sels, ARRAY_SIZE(ipu2_di0_sels)); - clk[ipu2_di1_sel] = imx_clk_mux("ipu2_di1_sel", base + 0x38, 9, 3, ipu2_di1_sels, ARRAY_SIZE(ipu2_di1_sels)); + clk[ipu1_di0_pre_sel] = imx_clk_mux_flags("ipu1_di0_pre_sel", base + 0x34, 6, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT); + clk[ipu1_di1_pre_sel] = imx_clk_mux_flags("ipu1_di1_pre_sel", base + 0x34, 15, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT); + clk[ipu2_di0_pre_sel] = imx_clk_mux_flags("ipu2_di0_pre_sel", base + 0x38, 6, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT); + clk[ipu2_di1_pre_sel] = imx_clk_mux_flags("ipu2_di1_pre_sel", base + 0x38, 15, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels), CLK_SET_RATE_PARENT); + clk[ipu1_di0_sel] = imx_clk_mux_flags("ipu1_di0_sel", base + 0x34, 0, 3, ipu1_di0_sels, ARRAY_SIZE(ipu1_di0_sels), CLK_SET_RATE_PARENT); + clk[ipu1_di1_sel] = imx_clk_mux_flags("ipu1_di1_sel", base + 0x34, 9, 3, ipu1_di1_sels, ARRAY_SIZE(ipu1_di1_sels), CLK_SET_RATE_PARENT); + clk[ipu2_di0_sel] = imx_clk_mux_flags("ipu2_di0_sel", base + 0x38, 0, 3, ipu2_di0_sels, ARRAY_SIZE(ipu2_di0_sels), CLK_SET_RATE_PARENT); + clk[ipu2_di1_sel] = imx_clk_mux_flags("ipu2_di1_sel", base + 0x38, 9, 3, ipu2_di1_sels, ARRAY_SIZE(ipu2_di1_sels), CLK_SET_RATE_PARENT); clk[hsi_tx_sel] = imx_clk_mux("hsi_tx_sel", base + 0x30, 28, 1, hsi_tx_sels, ARRAY_SIZE(hsi_tx_sels)); clk[pcie_axi_sel] = imx_clk_mux("pcie_axi_sel", base + 0x18, 10, 1, pcie_axi_sels, ARRAY_SIZE(pcie_axi_sels)); clk[ssi1_sel] = imx_clk_fixup_mux("ssi1_sel", base + 0x1c, 10, 2, ssi_sels, ARRAY_SIZE(ssi_sels), imx_cscmr1_fixup); -- cgit v1.2.3