From f38b0dd63f0d0cca753bf0997eefdfb23dcc9518 Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Wed, 12 Jun 2013 16:04:34 +0300 Subject: CLK: TI: Add DPLL clock support The OMAP clock driver now supports DPLL clock type. This patch also adds support for DT DPLL nodes. Signed-off-by: Tero Kristo Acked-by: Tony Lindgren Signed-off-by: Mike Turquette --- .../devicetree/bindings/clock/ti/dpll.txt | 75 ++++++++++++++++++++++ 1 file changed, 75 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/ti/dpll.txt (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/clock/ti/dpll.txt b/Documentation/devicetree/bindings/clock/ti/dpll.txt new file mode 100644 index 000000000000..30bfdb7c9f18 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/ti/dpll.txt @@ -0,0 +1,75 @@ +Binding for Texas Instruments DPLL clock. + +Binding status: Unstable - ABI compatibility may be broken in the future + +This binding uses the common clock binding[1]. It assumes a +register-mapped DPLL with usually two selectable input clocks +(reference clock and bypass clock), with digital phase locked +loop logic for multiplying the input clock to a desired output +clock. This clock also typically supports different operation +modes (locked, low power stop etc.) This binding has several +sub-types, which effectively result in slightly different setup +for the actual DPLL clock. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt + +Required properties: +- compatible : shall be one of: + "ti,omap3-dpll-clock", + "ti,omap3-dpll-core-clock", + "ti,omap3-dpll-per-clock", + "ti,omap3-dpll-per-j-type-clock", + "ti,omap4-dpll-clock", + "ti,omap4-dpll-x2-clock", + "ti,omap4-dpll-core-clock", + "ti,omap4-dpll-m4xen-clock", + "ti,omap4-dpll-j-type-clock", + "ti,am3-dpll-no-gate-clock", + "ti,am3-dpll-j-type-clock", + "ti,am3-dpll-no-gate-j-type-clock", + "ti,am3-dpll-clock", + "ti,am3-dpll-core-clock", + "ti,am3-dpll-x2-clock", + +- #clock-cells : from common clock binding; shall be set to 0. +- clocks : link phandles of parent clocks, first entry lists reference clock + and second entry bypass clock +- reg : offsets for the register set for controlling the DPLL. + Registers are listed in following order: + "control" - contains the control register base address + "idlest" - contains the idle status register base address + "mult-div1" - contains the multiplier / divider register base address + "autoidle" - contains the autoidle register base address (optional) + ti,am3-* dpll types do not have autoidle register + +Optional properties: +- DPLL mode setting - defining any one or more of the following overrides + default setting. + - ti,low-power-stop : DPLL supports low power stop mode, gating output + - ti,low-power-bypass : DPLL output matches rate of parent bypass clock + - ti,lock : DPLL locks in programmed rate + +Examples: + dpll_core_ck: dpll_core_ck@44e00490 { + #clock-cells = <0>; + compatible = "ti,omap4-dpll-core-clock"; + clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; + reg = <0x490>, <0x45c>, <0x488>, <0x468>; + }; + + dpll2_ck: dpll2_ck@48004004 { + #clock-cells = <0>; + compatible = "ti,omap3-dpll-clock"; + clocks = <&sys_ck>, <&dpll2_fck>; + ti,low-power-stop; + ti,low-power-bypass; + ti,lock; + reg = <0x4>, <0x24>, <0x34>, <0x40>; + }; + + dpll_core_ck: dpll_core_ck@44e00490 { + #clock-cells = <0>; + compatible = "ti,am3-dpll-core-clock"; + clocks = <&sys_clkin_ck>, <&sys_clkin_ck>; + reg = <0x90>, <0x5c>, <0x68>; + }; -- cgit v1.2.3 From b1a07b478b63f0a8f971b3a82ce34a67a9324547 Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Tue, 18 Jun 2013 16:27:57 +0300 Subject: CLK: TI: add autoidle support TI clk driver now routes some of the basic clocks through own registration routine to allow autoidle support. This routine just checks a couple of device node properties and adds autoidle support if required, and just passes the registration forward to basic clocks. Signed-off-by: Tero Kristo Acked-by: Tony Lindgren Signed-off-by: Mike Turquette --- .../devicetree/bindings/clock/ti/autoidle.txt | 39 ++++++ arch/arm/mach-omap2/clock.c | 6 + drivers/clk/ti/Makefile | 2 +- drivers/clk/ti/autoidle.c | 133 +++++++++++++++++++++ include/linux/clk/ti.h | 9 ++ 5 files changed, 188 insertions(+), 1 deletion(-) create mode 100644 Documentation/devicetree/bindings/clock/ti/autoidle.txt create mode 100644 drivers/clk/ti/autoidle.c (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/clock/ti/autoidle.txt b/Documentation/devicetree/bindings/clock/ti/autoidle.txt new file mode 100644 index 000000000000..7c735dde9fe9 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/ti/autoidle.txt @@ -0,0 +1,39 @@ +Binding for Texas Instruments autoidle clock. + +Binding status: Unstable - ABI compatibility may be broken in the future + +This binding uses the common clock binding[1]. It assumes a register mapped +clock which can be put to idle automatically by hardware based on the usage +and a configuration bit setting. Autoidle clock is never an individual +clock, it is always a derivative of some basic clock like a gate, divider, +or fixed-factor. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt + +Required properties: +- reg : offset for the register controlling the autoidle +- ti,autoidle-shift : bit shift of the autoidle enable bit +- ti,invert-autoidle-bit : autoidle is enabled by setting the bit to 0 + +Examples: + dpll_core_m4_ck: dpll_core_m4_ck { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_core_x2_ck>; + ti,max-div = <31>; + ti,autoidle-shift = <8>; + reg = <0x2d38>; + ti,index-starts-at-one; + ti,invert-autoidle-bit; + }; + + dpll_usb_clkdcoldo_ck: dpll_usb_clkdcoldo_ck { + #clock-cells = <0>; + compatible = "ti,fixed-factor-clock"; + clocks = <&dpll_usb_ck>; + ti,clock-div = <1>; + ti,autoidle-shift = <8>; + reg = <0x01b4>; + ti,clock-mult = <1>; + ti,invert-autoidle-bit; + }; diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index c7c5d31e9082..238be3f1ddce 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -520,6 +520,9 @@ int omap2_clk_enable_autoidle_all(void) list_for_each_entry(c, &clk_hw_omap_clocks, node) if (c->ops && c->ops->allow_idle) c->ops->allow_idle(c); + + of_ti_clk_allow_autoidle_all(); + return 0; } @@ -539,6 +542,9 @@ int omap2_clk_disable_autoidle_all(void) list_for_each_entry(c, &clk_hw_omap_clocks, node) if (c->ops && c->ops->deny_idle) c->ops->deny_idle(c); + + of_ti_clk_deny_autoidle_all(); + return 0; } diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile index 3dbb78dc9fca..7fa1a48df4f3 100644 --- a/drivers/clk/ti/Makefile +++ b/drivers/clk/ti/Makefile @@ -1,4 +1,4 @@ ifneq ($(CONFIG_OF),) -obj-y += clk.o +obj-y += clk.o autoidle.o clk-common = dpll.o endif diff --git a/drivers/clk/ti/autoidle.c b/drivers/clk/ti/autoidle.c new file mode 100644 index 000000000000..8912ff80af34 --- /dev/null +++ b/drivers/clk/ti/autoidle.c @@ -0,0 +1,133 @@ +/* + * TI clock autoidle support + * + * Copyright (C) 2013 Texas Instruments, Inc. + * + * Tero Kristo + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include + +struct clk_ti_autoidle { + void __iomem *reg; + u8 shift; + u8 flags; + const char *name; + struct list_head node; +}; + +#define AUTOIDLE_LOW 0x1 + +static LIST_HEAD(autoidle_clks); + +static void ti_allow_autoidle(struct clk_ti_autoidle *clk) +{ + u32 val; + + val = ti_clk_ll_ops->clk_readl(clk->reg); + + if (clk->flags & AUTOIDLE_LOW) + val &= ~(1 << clk->shift); + else + val |= (1 << clk->shift); + + ti_clk_ll_ops->clk_writel(val, clk->reg); +} + +static void ti_deny_autoidle(struct clk_ti_autoidle *clk) +{ + u32 val; + + val = ti_clk_ll_ops->clk_readl(clk->reg); + + if (clk->flags & AUTOIDLE_LOW) + val |= (1 << clk->shift); + else + val &= ~(1 << clk->shift); + + ti_clk_ll_ops->clk_writel(val, clk->reg); +} + +/** + * of_ti_clk_allow_autoidle_all - enable autoidle for all clocks + * + * Enables hardware autoidle for all registered DT clocks, which have + * the feature. + */ +void of_ti_clk_allow_autoidle_all(void) +{ + struct clk_ti_autoidle *c; + + list_for_each_entry(c, &autoidle_clks, node) + ti_allow_autoidle(c); +} + +/** + * of_ti_clk_deny_autoidle_all - disable autoidle for all clocks + * + * Disables hardware autoidle for all registered DT clocks, which have + * the feature. + */ +void of_ti_clk_deny_autoidle_all(void) +{ + struct clk_ti_autoidle *c; + + list_for_each_entry(c, &autoidle_clks, node) + ti_deny_autoidle(c); +} + +/** + * of_ti_clk_autoidle_setup - sets up hardware autoidle for a clock + * @node: pointer to the clock device node + * + * Checks if a clock has hardware autoidle support or not (check + * for presence of 'ti,autoidle-shift' property in the device tree + * node) and sets up the hardware autoidle feature for the clock + * if available. If autoidle is available, the clock is also added + * to the autoidle list for later processing. Returns 0 on success, + * negative error value on failure. + */ +int __init of_ti_clk_autoidle_setup(struct device_node *node) +{ + u32 shift; + struct clk_ti_autoidle *clk; + + /* Check if this clock has autoidle support or not */ + if (of_property_read_u32(node, "ti,autoidle-shift", &shift)) + return 0; + + clk = kzalloc(sizeof(*clk), GFP_KERNEL); + + if (!clk) + return -ENOMEM; + + clk->shift = shift; + clk->name = node->name; + clk->reg = ti_clk_get_reg_addr(node, 0); + + if (!clk->reg) { + kfree(clk); + return -EINVAL; + } + + if (of_property_read_bool(node, "ti,invert-autoidle-bit")) + clk->flags |= AUTOIDLE_LOW; + + list_add(&clk->node, &autoidle_clks); + + return 0; +} diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h index 3f9de3973582..ca38ee3620b1 100644 --- a/include/linux/clk/ti.h +++ b/include/linux/clk/ti.h @@ -242,6 +242,15 @@ void ti_dt_clocks_register(struct ti_dt_clk *oclks); void ti_dt_clk_init_provider(struct device_node *np, int index); int ti_clk_retry_init(struct device_node *node, struct clk_hw *hw, ti_of_clk_init_cb_t func); +int of_ti_clk_autoidle_setup(struct device_node *node); + +#ifdef CONFIG_OF +void of_ti_clk_allow_autoidle_all(void); +void of_ti_clk_deny_autoidle_all(void); +#else +static inline void of_ti_clk_allow_autoidle_all(void) { } +static inline void of_ti_clk_deny_autoidle_all(void) { } +#endif extern const struct clk_hw_omap_ops clkhwops_omap3_dpll; extern const struct clk_hw_omap_ops clkhwops_omap4_dpllmx; -- cgit v1.2.3 From 975e15487d5abfd5f33fea9c1ba0b987604f0d0f Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Mon, 9 Sep 2013 15:46:45 +0300 Subject: clk: ti: add composite clock support This is a multipurpose clock node, which contains support for multiple sub-clocks. Uses basic composite clock type to implement the actual functionality, and TI specific gate, mux and divider clocks. Signed-off-by: Tero Kristo Acked-by: Tony Lindgren Signed-off-by: Mike Turquette --- .../devicetree/bindings/clock/ti/composite.txt | 54 +++++ arch/arm/mach-omap2/clock.h | 3 - drivers/clk/ti/Makefile | 2 +- drivers/clk/ti/composite.c | 269 +++++++++++++++++++++ include/linux/clk/ti.h | 12 + 5 files changed, 336 insertions(+), 4 deletions(-) create mode 100644 Documentation/devicetree/bindings/clock/ti/composite.txt create mode 100644 drivers/clk/ti/composite.c (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/clock/ti/composite.txt b/Documentation/devicetree/bindings/clock/ti/composite.txt new file mode 100644 index 000000000000..5f43c4706b09 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/ti/composite.txt @@ -0,0 +1,54 @@ +Binding for TI composite clock. + +Binding status: Unstable - ABI compatibility may be broken in the future + +This binding uses the common clock binding[1]. It assumes a +register-mapped composite clock with multiple different sub-types; + +a multiplexer clock with multiple input clock signals or parents, one +of which can be selected as output, this behaves exactly as [2] + +an adjustable clock rate divider, this behaves exactly as [3] + +a gating function which can be used to enable and disable the output +clock, this behaves exactly as [4] + +The binding must provide a list of the component clocks that shall be +merged to this clock. The component clocks shall be of one of the +"ti,*composite*-clock" types. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt +[2] Documentation/devicetree/bindings/clock/ti/mux.txt +[3] Documentation/devicetree/bindings/clock/ti/divider.txt +[4] Documentation/devicetree/bindings/clock/ti/gate.txt + +Required properties: +- compatible : shall be: "ti,composite-clock" +- clocks : link phandles of component clocks +- #clock-cells : from common clock binding; shall be set to 0. + +Examples: + +usb_l4_gate_ick: usb_l4_gate_ick { + #clock-cells = <0>; + compatible = "ti,composite-interface-clock"; + clocks = <&l4_ick>; + ti,bit-shift = <5>; + reg = <0x0a10>; +}; + +usb_l4_div_ick: usb_l4_div_ick { + #clock-cells = <0>; + compatible = "ti,composite-divider-clock"; + clocks = <&l4_ick>; + ti,bit-shift = <4>; + ti,max-div = <1>; + reg = <0x0a40>; + ti,index-starts-at-one; +}; + +usb_l4_ick: usb_l4_ick { + #clock-cells = <0>; + compatible = "ti,composite-clock"; + clocks = <&usb_l4_gate_ick>, <&usb_l4_div_ick>; +}; diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h index b345f3ea8617..6bd72b53e4d4 100644 --- a/arch/arm/mach-omap2/clock.h +++ b/arch/arm/mach-omap2/clock.h @@ -240,9 +240,6 @@ extern void omap2_clkt_iclk_deny_idle(struct clk_hw_omap *clk); unsigned long omap2_get_dpll_rate(struct clk_hw_omap *clk); -int omap2_dflt_clk_enable(struct clk_hw *hw); -void omap2_dflt_clk_disable(struct clk_hw *hw); -int omap2_dflt_clk_is_enabled(struct clk_hw *hw); void omap2_clk_dflt_find_companion(struct clk_hw_omap *clk, void __iomem **other_reg, u8 *other_bit); diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile index 7fa1a48df4f3..ac4ea50672ed 100644 --- a/drivers/clk/ti/Makefile +++ b/drivers/clk/ti/Makefile @@ -1,4 +1,4 @@ ifneq ($(CONFIG_OF),) obj-y += clk.o autoidle.o -clk-common = dpll.o +clk-common = dpll.o composite.o endif diff --git a/drivers/clk/ti/composite.c b/drivers/clk/ti/composite.c new file mode 100644 index 000000000000..6539b650cae0 --- /dev/null +++ b/drivers/clk/ti/composite.c @@ -0,0 +1,269 @@ +/* + * TI composite clock support + * + * Copyright (C) 2013 Texas Instruments, Inc. + * + * Tero Kristo + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include + +#undef pr_fmt +#define pr_fmt(fmt) "%s: " fmt, __func__ + +#define to_clk_divider(_hw) container_of(_hw, struct clk_divider, hw) + +static unsigned long ti_composite_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + return clk_divider_ops.recalc_rate(hw, parent_rate); +} + +static long ti_composite_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *prate) +{ + return -EINVAL; +} + +static int ti_composite_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + return -EINVAL; +} + +static const struct clk_ops ti_composite_divider_ops = { + .recalc_rate = &ti_composite_recalc_rate, + .round_rate = &ti_composite_round_rate, + .set_rate = &ti_composite_set_rate, +}; + +static const struct clk_ops ti_composite_gate_ops = { + .enable = &omap2_dflt_clk_enable, + .disable = &omap2_dflt_clk_disable, + .is_enabled = &omap2_dflt_clk_is_enabled, +}; + +struct component_clk { + int num_parents; + const char **parent_names; + struct device_node *node; + int type; + struct clk_hw *hw; + struct list_head link; +}; + +static const char * __initconst component_clk_types[] = { + "gate", "divider", "mux" +}; + +static LIST_HEAD(component_clks); + +static struct device_node *_get_component_node(struct device_node *node, int i) +{ + int rc; + struct of_phandle_args clkspec; + + rc = of_parse_phandle_with_args(node, "clocks", "#clock-cells", i, + &clkspec); + if (rc) + return NULL; + + return clkspec.np; +} + +static struct component_clk *_lookup_component(struct device_node *node) +{ + struct component_clk *comp; + + list_for_each_entry(comp, &component_clks, link) { + if (comp->node == node) + return comp; + } + return NULL; +} + +struct clk_hw_omap_comp { + struct clk_hw hw; + struct device_node *comp_nodes[CLK_COMPONENT_TYPE_MAX]; + struct component_clk *comp_clks[CLK_COMPONENT_TYPE_MAX]; +}; + +static inline struct clk_hw *_get_hw(struct clk_hw_omap_comp *clk, int idx) +{ + if (!clk) + return NULL; + + if (!clk->comp_clks[idx]) + return NULL; + + return clk->comp_clks[idx]->hw; +} + +#define to_clk_hw_comp(_hw) container_of(_hw, struct clk_hw_omap_comp, hw) + +static void __init ti_clk_register_composite(struct clk_hw *hw, + struct device_node *node) +{ + struct clk *clk; + struct clk_hw_omap_comp *cclk = to_clk_hw_comp(hw); + struct component_clk *comp; + int num_parents = 0; + const char **parent_names = NULL; + int i; + + /* Check for presence of each component clock */ + for (i = 0; i < CLK_COMPONENT_TYPE_MAX; i++) { + if (!cclk->comp_nodes[i]) + continue; + + comp = _lookup_component(cclk->comp_nodes[i]); + if (!comp) { + pr_debug("component %s not ready for %s, retry\n", + cclk->comp_nodes[i]->name, node->name); + if (!ti_clk_retry_init(node, hw, + ti_clk_register_composite)) + return; + + goto cleanup; + } + if (cclk->comp_clks[comp->type] != NULL) { + pr_err("duplicate component types for %s (%s)!\n", + node->name, component_clk_types[comp->type]); + goto cleanup; + } + + cclk->comp_clks[comp->type] = comp; + + /* Mark this node as found */ + cclk->comp_nodes[i] = NULL; + } + + /* All components exists, proceed with registration */ + for (i = CLK_COMPONENT_TYPE_MAX - 1; i >= 0; i--) { + comp = cclk->comp_clks[i]; + if (!comp) + continue; + if (comp->num_parents) { + num_parents = comp->num_parents; + parent_names = comp->parent_names; + break; + } + } + + if (!num_parents) { + pr_err("%s: no parents found for %s!\n", __func__, node->name); + goto cleanup; + } + + clk = clk_register_composite(NULL, node->name, + parent_names, num_parents, + _get_hw(cclk, CLK_COMPONENT_TYPE_MUX), + &clk_mux_ops, + _get_hw(cclk, CLK_COMPONENT_TYPE_DIVIDER), + &ti_composite_divider_ops, + _get_hw(cclk, CLK_COMPONENT_TYPE_GATE), + &ti_composite_gate_ops, 0); + + if (!IS_ERR(clk)) + of_clk_add_provider(node, of_clk_src_simple_get, clk); + +cleanup: + /* Free component clock list entries */ + for (i = 0; i < CLK_COMPONENT_TYPE_MAX; i++) { + if (!cclk->comp_clks[i]) + continue; + list_del(&cclk->comp_clks[i]->link); + kfree(cclk->comp_clks[i]); + } + + kfree(cclk); +} + +static void __init of_ti_composite_clk_setup(struct device_node *node) +{ + int num_clks; + int i; + struct clk_hw_omap_comp *cclk; + + /* Number of component clocks to be put inside this clock */ + num_clks = of_clk_get_parent_count(node); + + if (num_clks < 1) { + pr_err("composite clk %s must have component(s)\n", node->name); + return; + } + + cclk = kzalloc(sizeof(*cclk), GFP_KERNEL); + if (!cclk) + return; + + /* Get device node pointers for each component clock */ + for (i = 0; i < num_clks; i++) + cclk->comp_nodes[i] = _get_component_node(node, i); + + ti_clk_register_composite(&cclk->hw, node); +} +CLK_OF_DECLARE(ti_composite_clock, "ti,composite-clock", + of_ti_composite_clk_setup); + +/** + * ti_clk_add_component - add a component clock to the pool + * @node: device node of the component clock + * @hw: hardware clock definition for the component clock + * @type: type of the component clock + * + * Adds a component clock to the list of available components, so that + * it can be registered by a composite clock. + */ +int __init ti_clk_add_component(struct device_node *node, struct clk_hw *hw, + int type) +{ + int num_parents; + const char **parent_names; + struct component_clk *clk; + int i; + + num_parents = of_clk_get_parent_count(node); + + if (num_parents < 1) { + pr_err("component-clock %s must have parent(s)\n", node->name); + return -EINVAL; + } + + parent_names = kzalloc((sizeof(char *) * num_parents), GFP_KERNEL); + if (!parent_names) + return -ENOMEM; + + for (i = 0; i < num_parents; i++) + parent_names[i] = of_clk_get_parent_name(node, i); + + clk = kzalloc(sizeof(*clk), GFP_KERNEL); + if (!clk) { + kfree(parent_names); + return -ENOMEM; + } + + clk->num_parents = num_parents; + clk->parent_names = parent_names; + clk->hw = hw; + clk->node = node; + clk->type = type; + list_add(&clk->link, &component_clks); + + return 0; +} diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h index ca38ee3620b1..c8c591dd3261 100644 --- a/include/linux/clk/ti.h +++ b/include/linux/clk/ti.h @@ -164,6 +164,14 @@ struct clk_hw_omap { /* DPLL Type and DCO Selection Flags */ #define DPLL_J_TYPE 0x1 +/* Composite clock component types */ +enum { + CLK_COMPONENT_TYPE_GATE = 0, + CLK_COMPONENT_TYPE_DIVIDER, + CLK_COMPONENT_TYPE_MUX, + CLK_COMPONENT_TYPE_MAX, +}; + /** * struct ti_dt_clk - OMAP DT clock alias declarations * @lk: clock lookup definition @@ -236,6 +244,9 @@ unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw, unsigned long parent_rate); int omap3_dpll4_set_rate(struct clk_hw *clk, unsigned long rate, unsigned long parent_rate); +int omap2_dflt_clk_enable(struct clk_hw *hw); +void omap2_dflt_clk_disable(struct clk_hw *hw); +int omap2_dflt_clk_is_enabled(struct clk_hw *hw); void __iomem *ti_clk_get_reg_addr(struct device_node *node, int index); void ti_dt_clocks_register(struct ti_dt_clk *oclks); @@ -243,6 +254,7 @@ void ti_dt_clk_init_provider(struct device_node *np, int index); int ti_clk_retry_init(struct device_node *node, struct clk_hw *hw, ti_of_clk_init_cb_t func); int of_ti_clk_autoidle_setup(struct device_node *node); +int ti_clk_add_component(struct device_node *node, struct clk_hw *hw, int type); #ifdef CONFIG_OF void of_ti_clk_allow_autoidle_all(void); -- cgit v1.2.3 From b4761198bfaf29649dc58a48e8b123ea4174ba95 Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Fri, 13 Sep 2013 12:02:15 +0300 Subject: CLK: ti: add support for ti divider-clock This patch adds support for TI divider clock binding, which simply uses the basic clock divider to provide the features needed. Signed-off-by: Tero Kristo Acked-by: Tony Lindgren Signed-off-by: Mike Turquette --- .../devicetree/bindings/clock/ti/divider.txt | 114 +++++ drivers/clk/ti/Makefile | 2 +- drivers/clk/ti/composite.c | 2 +- drivers/clk/ti/divider.c | 487 +++++++++++++++++++++ include/linux/clk/ti.h | 2 + 5 files changed, 605 insertions(+), 2 deletions(-) create mode 100644 Documentation/devicetree/bindings/clock/ti/divider.txt create mode 100644 drivers/clk/ti/divider.c (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/clock/ti/divider.txt b/Documentation/devicetree/bindings/clock/ti/divider.txt new file mode 100644 index 000000000000..35a6f5c7e5c2 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/ti/divider.txt @@ -0,0 +1,114 @@ +Binding for TI divider clock + +Binding status: Unstable - ABI compatibility may be broken in the future + +This binding uses the common clock binding[1]. It assumes a +register-mapped adjustable clock rate divider that does not gate and has +only one input clock or parent. By default the value programmed into +the register is one less than the actual divisor value. E.g: + +register value actual divisor value +0 1 +1 2 +2 3 + +This assumption may be modified by the following optional properties: + +ti,index-starts-at-one - valid divisor values start at 1, not the default +of 0. E.g: +register value actual divisor value +1 1 +2 2 +3 3 + +ti,index-power-of-two - valid divisor values are powers of two. E.g: +register value actual divisor value +0 1 +1 2 +2 4 + +Additionally an array of valid dividers may be supplied like so: + + ti,dividers = <4>, <8>, <0>, <16>; + +Which will map the resulting values to a divisor table by their index: +register value actual divisor value +0 4 +1 8 +2 +3 16 + +Any zero value in this array means the corresponding bit-value is invalid +and must not be used. + +The binding must also provide the register to control the divider and +unless the divider array is provided, min and max dividers. Optionally +the number of bits to shift that mask, if necessary. If the shift value +is missing it is the same as supplying a zero shift. + +This binding can also optionally provide support to the hardware autoidle +feature, see [2]. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt +[2] Documentation/devicetree/bindings/clock/ti/autoidle.txt + +Required properties: +- compatible : shall be "ti,divider-clock" or "ti,composite-divider-clock". +- #clock-cells : from common clock binding; shall be set to 0. +- clocks : link to phandle of parent clock +- reg : offset for register controlling adjustable divider + +Optional properties: +- clock-output-names : from common clock binding. +- ti,dividers : array of integers defining divisors +- ti,bit-shift : number of bits to shift the divider value, defaults to 0 +- ti,min-div : min divisor for dividing the input clock rate, only + needed if the first divisor is offset from the default value (1) +- ti,max-div : max divisor for dividing the input clock rate, only needed + if ti,dividers is not defined. +- ti,index-starts-at-one : valid divisor programming starts at 1, not zero, + only valid if ti,dividers is not defined. +- ti,index-power-of-two : valid divisor programming must be a power of two, + only valid if ti,dividers is not defined. +- ti,autoidle-shift : bit shift of the autoidle enable bit for the clock, + see [2] +- ti,invert-autoidle-bit : autoidle is enabled by setting the bit to 0, + see [2] +- ti,set-rate-parent : clk_set_rate is propagated to parent + +Examples: +dpll_usb_m2_ck: dpll_usb_m2_ck@4a008190 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&dpll_usb_ck>; + ti,max-div = <127>; + reg = <0x190>; + ti,index-starts-at-one; +}; + +aess_fclk: aess_fclk@4a004528 { + #clock-cells = <0>; + compatible = "ti,divider-clock"; + clocks = <&abe_clk>; + ti,bit-shift = <24>; + reg = <0x528>; + ti,max-div = <2>; +}; + +dpll_core_m3x2_div_ck: dpll_core_m3x2_div_ck { + #clock-cells = <0>; + compatible = "ti,composite-divider-clock"; + clocks = <&dpll_core_x2_ck>; + ti,max-div = <31>; + reg = <0x0134>; + ti,index-starts-at-one; +}; + +ssi_ssr_div_fck_3430es2: ssi_ssr_div_fck_3430es2 { + #clock-cells = <0>; + compatible = "ti,composite-divider-clock"; + clocks = <&corex2_fck>; + ti,bit-shift = <8>; + reg = <0x0a40>; + ti,dividers = <0>, <1>, <2>, <3>, <4>, <0>, <6>, <0>, <8>; +}; diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile index ac4ea50672ed..8690b0b442c0 100644 --- a/drivers/clk/ti/Makefile +++ b/drivers/clk/ti/Makefile @@ -1,4 +1,4 @@ ifneq ($(CONFIG_OF),) obj-y += clk.o autoidle.o -clk-common = dpll.o composite.o +clk-common = dpll.o composite.o divider.o endif diff --git a/drivers/clk/ti/composite.c b/drivers/clk/ti/composite.c index 6539b650cae0..ffb8db4829bf 100644 --- a/drivers/clk/ti/composite.c +++ b/drivers/clk/ti/composite.c @@ -31,7 +31,7 @@ static unsigned long ti_composite_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) { - return clk_divider_ops.recalc_rate(hw, parent_rate); + return ti_clk_divider_ops.recalc_rate(hw, parent_rate); } static long ti_composite_round_rate(struct clk_hw *hw, unsigned long rate, diff --git a/drivers/clk/ti/divider.c b/drivers/clk/ti/divider.c new file mode 100644 index 000000000000..a15e445570b2 --- /dev/null +++ b/drivers/clk/ti/divider.c @@ -0,0 +1,487 @@ +/* + * TI Divider Clock + * + * Copyright (C) 2013 Texas Instruments, Inc. + * + * Tero Kristo + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include + +#undef pr_fmt +#define pr_fmt(fmt) "%s: " fmt, __func__ + +#define to_clk_divider(_hw) container_of(_hw, struct clk_divider, hw) + +#define div_mask(d) ((1 << ((d)->width)) - 1) + +static unsigned int _get_table_maxdiv(const struct clk_div_table *table) +{ + unsigned int maxdiv = 0; + const struct clk_div_table *clkt; + + for (clkt = table; clkt->div; clkt++) + if (clkt->div > maxdiv) + maxdiv = clkt->div; + return maxdiv; +} + +static unsigned int _get_maxdiv(struct clk_divider *divider) +{ + if (divider->flags & CLK_DIVIDER_ONE_BASED) + return div_mask(divider); + if (divider->flags & CLK_DIVIDER_POWER_OF_TWO) + return 1 << div_mask(divider); + if (divider->table) + return _get_table_maxdiv(divider->table); + return div_mask(divider) + 1; +} + +static unsigned int _get_table_div(const struct clk_div_table *table, + unsigned int val) +{ + const struct clk_div_table *clkt; + + for (clkt = table; clkt->div; clkt++) + if (clkt->val == val) + return clkt->div; + return 0; +} + +static unsigned int _get_div(struct clk_divider *divider, unsigned int val) +{ + if (divider->flags & CLK_DIVIDER_ONE_BASED) + return val; + if (divider->flags & CLK_DIVIDER_POWER_OF_TWO) + return 1 << val; + if (divider->table) + return _get_table_div(divider->table, val); + return val + 1; +} + +static unsigned int _get_table_val(const struct clk_div_table *table, + unsigned int div) +{ + const struct clk_div_table *clkt; + + for (clkt = table; clkt->div; clkt++) + if (clkt->div == div) + return clkt->val; + return 0; +} + +static unsigned int _get_val(struct clk_divider *divider, u8 div) +{ + if (divider->flags & CLK_DIVIDER_ONE_BASED) + return div; + if (divider->flags & CLK_DIVIDER_POWER_OF_TWO) + return __ffs(div); + if (divider->table) + return _get_table_val(divider->table, div); + return div - 1; +} + +static unsigned long ti_clk_divider_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct clk_divider *divider = to_clk_divider(hw); + unsigned int div, val; + + val = ti_clk_ll_ops->clk_readl(divider->reg) >> divider->shift; + val &= div_mask(divider); + + div = _get_div(divider, val); + if (!div) { + WARN(!(divider->flags & CLK_DIVIDER_ALLOW_ZERO), + "%s: Zero divisor and CLK_DIVIDER_ALLOW_ZERO not set\n", + __clk_get_name(hw->clk)); + return parent_rate; + } + + return parent_rate / div; +} + +/* + * The reverse of DIV_ROUND_UP: The maximum number which + * divided by m is r + */ +#define MULT_ROUND_UP(r, m) ((r) * (m) + (m) - 1) + +static bool _is_valid_table_div(const struct clk_div_table *table, + unsigned int div) +{ + const struct clk_div_table *clkt; + + for (clkt = table; clkt->div; clkt++) + if (clkt->div == div) + return true; + return false; +} + +static bool _is_valid_div(struct clk_divider *divider, unsigned int div) +{ + if (divider->flags & CLK_DIVIDER_POWER_OF_TWO) + return is_power_of_2(div); + if (divider->table) + return _is_valid_table_div(divider->table, div); + return true; +} + +static int ti_clk_divider_bestdiv(struct clk_hw *hw, unsigned long rate, + unsigned long *best_parent_rate) +{ + struct clk_divider *divider = to_clk_divider(hw); + int i, bestdiv = 0; + unsigned long parent_rate, best = 0, now, maxdiv; + unsigned long parent_rate_saved = *best_parent_rate; + + if (!rate) + rate = 1; + + maxdiv = _get_maxdiv(divider); + + if (!(__clk_get_flags(hw->clk) & CLK_SET_RATE_PARENT)) { + parent_rate = *best_parent_rate; + bestdiv = DIV_ROUND_UP(parent_rate, rate); + bestdiv = bestdiv == 0 ? 1 : bestdiv; + bestdiv = bestdiv > maxdiv ? maxdiv : bestdiv; + return bestdiv; + } + + /* + * The maximum divider we can use without overflowing + * unsigned long in rate * i below + */ + maxdiv = min(ULONG_MAX / rate, maxdiv); + + for (i = 1; i <= maxdiv; i++) { + if (!_is_valid_div(divider, i)) + continue; + if (rate * i == parent_rate_saved) { + /* + * It's the most ideal case if the requested rate can be + * divided from parent clock without needing to change + * parent rate, so return the divider immediately. + */ + *best_parent_rate = parent_rate_saved; + return i; + } + parent_rate = __clk_round_rate(__clk_get_parent(hw->clk), + MULT_ROUND_UP(rate, i)); + now = parent_rate / i; + if (now <= rate && now > best) { + bestdiv = i; + best = now; + *best_parent_rate = parent_rate; + } + } + + if (!bestdiv) { + bestdiv = _get_maxdiv(divider); + *best_parent_rate = + __clk_round_rate(__clk_get_parent(hw->clk), 1); + } + + return bestdiv; +} + +static long ti_clk_divider_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *prate) +{ + int div; + div = ti_clk_divider_bestdiv(hw, rate, prate); + + return *prate / div; +} + +static int ti_clk_divider_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct clk_divider *divider = to_clk_divider(hw); + unsigned int div, value; + unsigned long flags = 0; + u32 val; + + div = parent_rate / rate; + value = _get_val(divider, div); + + if (value > div_mask(divider)) + value = div_mask(divider); + + if (divider->lock) + spin_lock_irqsave(divider->lock, flags); + + if (divider->flags & CLK_DIVIDER_HIWORD_MASK) { + val = div_mask(divider) << (divider->shift + 16); + } else { + val = ti_clk_ll_ops->clk_readl(divider->reg); + val &= ~(div_mask(divider) << divider->shift); + } + val |= value << divider->shift; + ti_clk_ll_ops->clk_writel(val, divider->reg); + + if (divider->lock) + spin_unlock_irqrestore(divider->lock, flags); + + return 0; +} + +const struct clk_ops ti_clk_divider_ops = { + .recalc_rate = ti_clk_divider_recalc_rate, + .round_rate = ti_clk_divider_round_rate, + .set_rate = ti_clk_divider_set_rate, +}; + +static struct clk *_register_divider(struct device *dev, const char *name, + const char *parent_name, + unsigned long flags, void __iomem *reg, + u8 shift, u8 width, u8 clk_divider_flags, + const struct clk_div_table *table, + spinlock_t *lock) +{ + struct clk_divider *div; + struct clk *clk; + struct clk_init_data init; + + if (clk_divider_flags & CLK_DIVIDER_HIWORD_MASK) { + if (width + shift > 16) { + pr_warn("divider value exceeds LOWORD field\n"); + return ERR_PTR(-EINVAL); + } + } + + /* allocate the divider */ + div = kzalloc(sizeof(*div), GFP_KERNEL); + if (!div) { + pr_err("%s: could not allocate divider clk\n", __func__); + return ERR_PTR(-ENOMEM); + } + + init.name = name; + init.ops = &ti_clk_divider_ops; + init.flags = flags | CLK_IS_BASIC; + init.parent_names = (parent_name ? &parent_name : NULL); + init.num_parents = (parent_name ? 1 : 0); + + /* struct clk_divider assignments */ + div->reg = reg; + div->shift = shift; + div->width = width; + div->flags = clk_divider_flags; + div->lock = lock; + div->hw.init = &init; + div->table = table; + + /* register the clock */ + clk = clk_register(dev, &div->hw); + + if (IS_ERR(clk)) + kfree(div); + + return clk; +} + +static struct clk_div_table +__init *ti_clk_get_div_table(struct device_node *node) +{ + struct clk_div_table *table; + const __be32 *divspec; + u32 val; + u32 num_div; + u32 valid_div; + int i; + + divspec = of_get_property(node, "ti,dividers", &num_div); + + if (!divspec) + return NULL; + + num_div /= 4; + + valid_div = 0; + + /* Determine required size for divider table */ + for (i = 0; i < num_div; i++) { + of_property_read_u32_index(node, "ti,dividers", i, &val); + if (val) + valid_div++; + } + + if (!valid_div) { + pr_err("no valid dividers for %s table\n", node->name); + return ERR_PTR(-EINVAL); + } + + table = kzalloc(sizeof(*table) * (valid_div + 1), GFP_KERNEL); + + if (!table) + return ERR_PTR(-ENOMEM); + + valid_div = 0; + + for (i = 0; i < num_div; i++) { + of_property_read_u32_index(node, "ti,dividers", i, &val); + if (val) { + table[valid_div].div = val; + table[valid_div].val = i; + valid_div++; + } + } + + return table; +} + +static int _get_divider_width(struct device_node *node, + const struct clk_div_table *table, + u8 flags) +{ + u32 min_div; + u32 max_div; + u32 val = 0; + u32 div; + + if (!table) { + /* Clk divider table not provided, determine min/max divs */ + if (of_property_read_u32(node, "ti,min-div", &min_div)) + min_div = 1; + + if (of_property_read_u32(node, "ti,max-div", &max_div)) { + pr_err("no max-div for %s!\n", node->name); + return -EINVAL; + } + + /* Determine bit width for the field */ + if (flags & CLK_DIVIDER_ONE_BASED) + val = 1; + + div = min_div; + + while (div < max_div) { + if (flags & CLK_DIVIDER_POWER_OF_TWO) + div <<= 1; + else + div++; + val++; + } + } else { + div = 0; + + while (table[div].div) { + val = table[div].val; + div++; + } + } + + return fls(val); +} + +static int __init ti_clk_divider_populate(struct device_node *node, + void __iomem **reg, const struct clk_div_table **table, + u32 *flags, u8 *div_flags, u8 *width, u8 *shift) +{ + u32 val; + + *reg = ti_clk_get_reg_addr(node, 0); + if (!*reg) + return -EINVAL; + + if (!of_property_read_u32(node, "ti,bit-shift", &val)) + *shift = val; + else + *shift = 0; + + *flags = 0; + *div_flags = 0; + + if (of_property_read_bool(node, "ti,index-starts-at-one")) + *div_flags |= CLK_DIVIDER_ONE_BASED; + + if (of_property_read_bool(node, "ti,index-power-of-two")) + *div_flags |= CLK_DIVIDER_POWER_OF_TWO; + + if (of_property_read_bool(node, "ti,set-rate-parent")) + *flags |= CLK_SET_RATE_PARENT; + + *table = ti_clk_get_div_table(node); + + if (IS_ERR(*table)) + return PTR_ERR(*table); + + *width = _get_divider_width(node, *table, *div_flags); + + return 0; +} + +/** + * of_ti_divider_clk_setup - Setup function for simple div rate clock + * @node: device node for this clock + * + * Sets up a basic divider clock. + */ +static void __init of_ti_divider_clk_setup(struct device_node *node) +{ + struct clk *clk; + const char *parent_name; + void __iomem *reg; + u8 clk_divider_flags = 0; + u8 width = 0; + u8 shift = 0; + const struct clk_div_table *table = NULL; + u32 flags = 0; + + parent_name = of_clk_get_parent_name(node, 0); + + if (ti_clk_divider_populate(node, ®, &table, &flags, + &clk_divider_flags, &width, &shift)) + goto cleanup; + + clk = _register_divider(NULL, node->name, parent_name, flags, reg, + shift, width, clk_divider_flags, table, NULL); + + if (!IS_ERR(clk)) { + of_clk_add_provider(node, of_clk_src_simple_get, clk); + of_ti_clk_autoidle_setup(node); + return; + } + +cleanup: + kfree(table); +} +CLK_OF_DECLARE(divider_clk, "ti,divider-clock", of_ti_divider_clk_setup); + +static void __init of_ti_composite_divider_clk_setup(struct device_node *node) +{ + struct clk_divider *div; + u32 val; + + div = kzalloc(sizeof(*div), GFP_KERNEL); + if (!div) + return; + + if (ti_clk_divider_populate(node, &div->reg, &div->table, &val, + &div->flags, &div->width, &div->shift) < 0) + goto cleanup; + + if (!ti_clk_add_component(node, &div->hw, CLK_COMPONENT_TYPE_DIVIDER)) + return; + +cleanup: + kfree(div->table); + kfree(div); +} +CLK_OF_DECLARE(ti_composite_divider_clk, "ti,composite-divider-clock", + of_ti_composite_divider_clk_setup); diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h index c8c591dd3261..17fb49e4ff5e 100644 --- a/include/linux/clk/ti.h +++ b/include/linux/clk/ti.h @@ -223,6 +223,8 @@ struct ti_clk_ll_ops { extern struct ti_clk_ll_ops *ti_clk_ll_ops; +extern const struct clk_ops ti_clk_divider_ops; + #define to_clk_hw_omap(_hw) container_of(_hw, struct clk_hw_omap, hw) void omap2_init_clk_hw_omap_clocks(struct clk *clk); -- cgit v1.2.3 From 1f847c65fd569c1d822800ba3e7e18c6411a7d50 Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Fri, 13 Sep 2013 14:57:59 +0300 Subject: clk: ti: add support for TI fixed factor clock This behaves exactly in similar manner to basic fixed-factor-clock, but adds a few properties on top for handling clock hardware autoidling. Signed-off-by: Tero Kristo Acked-by: Tony Lindgren Signed-off-by: Mike Turquette --- .../bindings/clock/ti/fixed-factor-clock.txt | 43 ++++++++++++++ drivers/clk/ti/Makefile | 3 +- drivers/clk/ti/fixed-factor.c | 66 ++++++++++++++++++++++ 3 files changed, 111 insertions(+), 1 deletion(-) create mode 100644 Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt create mode 100644 drivers/clk/ti/fixed-factor.c (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt b/Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt new file mode 100644 index 000000000000..662b36d53bf0 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/ti/fixed-factor-clock.txt @@ -0,0 +1,43 @@ +Binding for TI fixed factor rate clock sources. + +Binding status: Unstable - ABI compatibility may be broken in the future + +This binding uses the common clock binding[1], and also uses the autoidle +support from TI autoidle clock [2]. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt +[2] Documentation/devicetree/bindings/clock/ti/autoidle.txt + +Required properties: +- compatible : shall be "ti,fixed-factor-clock". +- #clock-cells : from common clock binding; shall be set to 0. +- ti,clock-div: fixed divider. +- ti,clock-mult: fixed multiplier. +- clocks: parent clock. + +Optional properties: +- ti,autoidle-shift: bit shift of the autoidle enable bit for the clock, + see [2] +- reg: offset for the autoidle register of this clock, see [2] +- ti,invert-autoidle-bit: autoidle is enabled by setting the bit to 0, see [2] +- ti,set-rate-parent: clk_set_rate is propagated to parent + +Example: + clock { + compatible = "ti,fixed-factor-clock"; + clocks = <&parentclk>; + #clock-cells = <0>; + ti,clock-div = <2>; + ti,clock-mult = <1>; + }; + + dpll_usb_clkdcoldo_ck: dpll_usb_clkdcoldo_ck { + #clock-cells = <0>; + compatible = "ti,fixed-factor-clock"; + clocks = <&dpll_usb_ck>; + ti,clock-div = <1>; + ti,autoidle-shift = <8>; + reg = <0x01b4>; + ti,clock-mult = <1>; + ti,invert-autoidle-bit; + }; diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile index 8690b0b442c0..d3586252a391 100644 --- a/drivers/clk/ti/Makefile +++ b/drivers/clk/ti/Makefile @@ -1,4 +1,5 @@ ifneq ($(CONFIG_OF),) obj-y += clk.o autoidle.o -clk-common = dpll.o composite.o divider.o +clk-common = dpll.o composite.o divider.o \ + fixed-factor.o endif diff --git a/drivers/clk/ti/fixed-factor.c b/drivers/clk/ti/fixed-factor.c new file mode 100644 index 000000000000..c2c8a287408c --- /dev/null +++ b/drivers/clk/ti/fixed-factor.c @@ -0,0 +1,66 @@ +/* + * TI Fixed Factor Clock + * + * Copyright (C) 2013 Texas Instruments, Inc. + * + * Tero Kristo + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include + +#undef pr_fmt +#define pr_fmt(fmt) "%s: " fmt, __func__ + +/** + * of_ti_fixed_factor_clk_setup - Setup function for TI fixed factor clock + * @node: device node for this clock + * + * Sets up a simple fixed factor clock based on device tree info. + */ +static void __init of_ti_fixed_factor_clk_setup(struct device_node *node) +{ + struct clk *clk; + const char *clk_name = node->name; + const char *parent_name; + u32 div, mult; + u32 flags = 0; + + if (of_property_read_u32(node, "ti,clock-div", &div)) { + pr_err("%s must have a clock-div property\n", node->name); + return; + } + + if (of_property_read_u32(node, "ti,clock-mult", &mult)) { + pr_err("%s must have a clock-mult property\n", node->name); + return; + } + + if (of_property_read_bool(node, "ti,set-rate-parent")) + flags |= CLK_SET_RATE_PARENT; + + parent_name = of_clk_get_parent_name(node, 0); + + clk = clk_register_fixed_factor(NULL, clk_name, parent_name, flags, + mult, div); + + if (!IS_ERR(clk)) { + of_clk_add_provider(node, of_clk_src_simple_get, clk); + of_ti_clk_autoidle_setup(node); + } +} +CLK_OF_DECLARE(ti_fixed_factor_clk, "ti,fixed-factor-clock", + of_ti_fixed_factor_clk_setup); -- cgit v1.2.3 From f60b1ea5ea7ab1aee34a5ba55520b84b6e6d482e Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Tue, 18 Jun 2013 18:55:59 +0300 Subject: CLK: TI: add support for gate clock This patch adds support for TI specific gate clocks. These behave as basic gate-clock, but have different ops / hw-ops for controlling the actual gate, for example waiting until the clock is ready. Several sub-types are supported: - ti,gate-clock: basic gate clock with default ops/hwops - ti,clkdm-gate-clock: clockdomain level gate control - ti,dss-gate-clock: gate clock with DSS specific hardware handling - ti,am35xx-gate-clock: gate clock with AM35xx specific hardware handling - ti,hsdiv-gate-clock: gate clock with OMAP36xx hardware errata handling Signed-off-by: Tero Kristo Acked-by: Tony Lindgren Signed-off-by: Mike Turquette --- .../devicetree/bindings/clock/ti/gate.txt | 85 +++++++ drivers/clk/ti/Makefile | 2 +- drivers/clk/ti/gate.c | 249 +++++++++++++++++++++ include/linux/clk/ti.h | 6 + 4 files changed, 341 insertions(+), 1 deletion(-) create mode 100644 Documentation/devicetree/bindings/clock/ti/gate.txt create mode 100644 drivers/clk/ti/gate.c (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/clock/ti/gate.txt b/Documentation/devicetree/bindings/clock/ti/gate.txt new file mode 100644 index 000000000000..125281aaa4ca --- /dev/null +++ b/Documentation/devicetree/bindings/clock/ti/gate.txt @@ -0,0 +1,85 @@ +Binding for Texas Instruments gate clock. + +Binding status: Unstable - ABI compatibility may be broken in the future + +This binding uses the common clock binding[1]. This clock is +quite much similar to the basic gate-clock [2], however, +it supports a number of additional features. If no register +is provided for this clock, the code assumes that a clockdomain +will be controlled instead and the corresponding hw-ops for +that is used. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt +[2] Documentation/devicetree/bindings/clock/gate-clock.txt +[3] Documentation/devicetree/bindings/clock/ti/clockdomain.txt + +Required properties: +- compatible : shall be one of: + "ti,gate-clock" - basic gate clock + "ti,wait-gate-clock" - gate clock which waits until clock is active before + returning from clk_enable() + "ti,dss-gate-clock" - gate clock with DSS specific hardware handling + "ti,am35xx-gate-clock" - gate clock with AM35xx specific hardware handling + "ti,clkdm-gate-clock" - clockdomain gate clock, which derives its functional + clock directly from a clockdomain, see [3] how + to map clockdomains properly + "ti,hsdiv-gate-clock" - gate clock with OMAP36xx specific hardware handling, + required for a hardware errata +- #clock-cells : from common clock binding; shall be set to 0 +- clocks : link to phandle of parent clock +- reg : offset for register controlling adjustable gate, not needed for + ti,clkdm-gate-clock type + +Optional properties: +- ti,bit-shift : bit shift for programming the clock gate, invalid for + ti,clkdm-gate-clock type +- ti,set-bit-to-disable : inverts default gate programming. Setting the bit + gates the clock and clearing the bit ungates the clock. + +Examples: + mmchs2_fck: mmchs2_fck@48004a00 { + #clock-cells = <0>; + compatible = "ti,gate-clock"; + clocks = <&core_96m_fck>; + reg = <0x48004a00 0x4>; + ti,bit-shift = <25>; + }; + + uart4_fck_am35xx: uart4_fck_am35xx { + #clock-cells = <0>; + compatible = "ti,wait-gate-clock"; + clocks = <&core_48m_fck>; + reg = <0x0a00>; + ti,bit-shift = <23>; + }; + + dss1_alwon_fck_3430es2: dss1_alwon_fck_3430es2@48004e00 { + #clock-cells = <0>; + compatible = "ti,dss-gate-clock"; + clocks = <&dpll4_m4x2_ck>; + reg = <0x48004e00 0x4>; + ti,bit-shift = <0>; + }; + + emac_ick: emac_ick@4800259c { + #clock-cells = <0>; + compatible = "ti,am35xx-gate-clock"; + clocks = <&ipss_ick>; + reg = <0x4800259c 0x4>; + ti,bit-shift = <1>; + }; + + emu_src_ck: emu_src_ck { + #clock-cells = <0>; + compatible = "ti,clkdm-gate-clock"; + clocks = <&emu_src_mux_ck>; + }; + + dpll4_m2x2_ck: dpll4_m2x2_ck@48004d00 { + #clock-cells = <0>; + compatible = "ti,hsdiv-gate-clock"; + clocks = <&dpll4_m2x2_mul_ck>; + ti,bit-shift = <0x1b>; + reg = <0x48004d00 0x4>; + ti,set-bit-to-disable; + }; diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile index d3586252a391..eaa6dc0aeb75 100644 --- a/drivers/clk/ti/Makefile +++ b/drivers/clk/ti/Makefile @@ -1,5 +1,5 @@ ifneq ($(CONFIG_OF),) obj-y += clk.o autoidle.o -clk-common = dpll.o composite.o divider.o \ +clk-common = dpll.o composite.o divider.o gate.o \ fixed-factor.o endif diff --git a/drivers/clk/ti/gate.c b/drivers/clk/ti/gate.c new file mode 100644 index 000000000000..3e2999d11d15 --- /dev/null +++ b/drivers/clk/ti/gate.c @@ -0,0 +1,249 @@ +/* + * OMAP gate clock support + * + * Copyright (C) 2013 Texas Instruments, Inc. + * + * Tero Kristo + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include + +#define to_clk_divider(_hw) container_of(_hw, struct clk_divider, hw) + +#undef pr_fmt +#define pr_fmt(fmt) "%s: " fmt, __func__ + +static int omap36xx_gate_clk_enable_with_hsdiv_restore(struct clk_hw *clk); + +static const struct clk_ops omap_gate_clkdm_clk_ops = { + .init = &omap2_init_clk_clkdm, + .enable = &omap2_clkops_enable_clkdm, + .disable = &omap2_clkops_disable_clkdm, +}; + +static const struct clk_ops omap_gate_clk_ops = { + .init = &omap2_init_clk_clkdm, + .enable = &omap2_dflt_clk_enable, + .disable = &omap2_dflt_clk_disable, + .is_enabled = &omap2_dflt_clk_is_enabled, +}; + +static const struct clk_ops omap_gate_clk_hsdiv_restore_ops = { + .init = &omap2_init_clk_clkdm, + .enable = &omap36xx_gate_clk_enable_with_hsdiv_restore, + .disable = &omap2_dflt_clk_disable, + .is_enabled = &omap2_dflt_clk_is_enabled, +}; + +/** + * omap36xx_gate_clk_enable_with_hsdiv_restore - enable clocks suffering + * from HSDivider PWRDN problem Implements Errata ID: i556. + * @clk: DPLL output struct clk + * + * 3630 only: dpll3_m3_ck, dpll4_m2_ck, dpll4_m3_ck, dpll4_m4_ck, + * dpll4_m5_ck & dpll4_m6_ck dividers gets loaded with reset + * valueafter their respective PWRDN bits are set. Any dummy write + * (Any other value different from the Read value) to the + * corresponding CM_CLKSEL register will refresh the dividers. + */ +static int omap36xx_gate_clk_enable_with_hsdiv_restore(struct clk_hw *clk) +{ + struct clk_divider *parent; + struct clk_hw *parent_hw; + u32 dummy_v, orig_v; + int ret; + + /* Clear PWRDN bit of HSDIVIDER */ + ret = omap2_dflt_clk_enable(clk); + + /* Parent is the x2 node, get parent of parent for the m2 div */ + parent_hw = __clk_get_hw(__clk_get_parent(__clk_get_parent(clk->clk))); + parent = to_clk_divider(parent_hw); + + /* Restore the dividers */ + if (!ret) { + orig_v = ti_clk_ll_ops->clk_readl(parent->reg); + dummy_v = orig_v; + + /* Write any other value different from the Read value */ + dummy_v ^= (1 << parent->shift); + ti_clk_ll_ops->clk_writel(dummy_v, parent->reg); + + /* Write the original divider */ + ti_clk_ll_ops->clk_writel(orig_v, parent->reg); + } + + return ret; +} + +static void __init _of_ti_gate_clk_setup(struct device_node *node, + const struct clk_ops *ops, + const struct clk_hw_omap_ops *hw_ops) +{ + struct clk *clk; + struct clk_init_data init = { NULL }; + struct clk_hw_omap *clk_hw; + const char *clk_name = node->name; + const char *parent_name; + u32 val; + + clk_hw = kzalloc(sizeof(*clk_hw), GFP_KERNEL); + if (!clk_hw) + return; + + clk_hw->hw.init = &init; + + init.name = clk_name; + init.ops = ops; + + if (ops != &omap_gate_clkdm_clk_ops) { + clk_hw->enable_reg = ti_clk_get_reg_addr(node, 0); + if (!clk_hw->enable_reg) + goto cleanup; + + if (!of_property_read_u32(node, "ti,bit-shift", &val)) + clk_hw->enable_bit = val; + } + + clk_hw->ops = hw_ops; + + clk_hw->flags = MEMMAP_ADDRESSING; + + if (of_clk_get_parent_count(node) != 1) { + pr_err("%s must have 1 parent\n", clk_name); + goto cleanup; + } + + parent_name = of_clk_get_parent_name(node, 0); + init.parent_names = &parent_name; + init.num_parents = 1; + + if (of_property_read_bool(node, "ti,set-rate-parent")) + init.flags |= CLK_SET_RATE_PARENT; + + if (of_property_read_bool(node, "ti,set-bit-to-disable")) + clk_hw->flags |= INVERT_ENABLE; + + clk = clk_register(NULL, &clk_hw->hw); + + if (!IS_ERR(clk)) { + of_clk_add_provider(node, of_clk_src_simple_get, clk); + return; + } + +cleanup: + kfree(clk_hw); +} + +static void __init +_of_ti_composite_gate_clk_setup(struct device_node *node, + const struct clk_hw_omap_ops *hw_ops) +{ + struct clk_hw_omap *gate; + u32 val = 0; + + gate = kzalloc(sizeof(*gate), GFP_KERNEL); + if (!gate) + return; + + gate->enable_reg = ti_clk_get_reg_addr(node, 0); + if (!gate->enable_reg) + goto cleanup; + + of_property_read_u32(node, "ti,bit-shift", &val); + + gate->enable_bit = val; + gate->ops = hw_ops; + gate->flags = MEMMAP_ADDRESSING; + + if (!ti_clk_add_component(node, &gate->hw, CLK_COMPONENT_TYPE_GATE)) + return; + +cleanup: + kfree(gate); +} + +static void __init +of_ti_composite_no_wait_gate_clk_setup(struct device_node *node) +{ + _of_ti_composite_gate_clk_setup(node, NULL); +} +CLK_OF_DECLARE(ti_composite_no_wait_gate_clk, "ti,composite-no-wait-gate-clock", + of_ti_composite_no_wait_gate_clk_setup); + +#ifdef CONFIG_ARCH_OMAP3 +static void __init of_ti_composite_interface_clk_setup(struct device_node *node) +{ + _of_ti_composite_gate_clk_setup(node, &clkhwops_iclk_wait); +} +CLK_OF_DECLARE(ti_composite_interface_clk, "ti,composite-interface-clock", + of_ti_composite_interface_clk_setup); +#endif + +static void __init of_ti_composite_gate_clk_setup(struct device_node *node) +{ + _of_ti_composite_gate_clk_setup(node, &clkhwops_wait); +} +CLK_OF_DECLARE(ti_composite_gate_clk, "ti,composite-gate-clock", + of_ti_composite_gate_clk_setup); + + +static void __init of_ti_clkdm_gate_clk_setup(struct device_node *node) +{ + _of_ti_gate_clk_setup(node, &omap_gate_clkdm_clk_ops, NULL); +} +CLK_OF_DECLARE(ti_clkdm_gate_clk, "ti,clkdm-gate-clock", + of_ti_clkdm_gate_clk_setup); + +static void __init of_ti_hsdiv_gate_clk_setup(struct device_node *node) +{ + _of_ti_gate_clk_setup(node, &omap_gate_clk_hsdiv_restore_ops, + &clkhwops_wait); +} +CLK_OF_DECLARE(ti_hsdiv_gate_clk, "ti,hsdiv-gate-clock", + of_ti_hsdiv_gate_clk_setup); + +static void __init of_ti_gate_clk_setup(struct device_node *node) +{ + _of_ti_gate_clk_setup(node, &omap_gate_clk_ops, NULL); +} +CLK_OF_DECLARE(ti_gate_clk, "ti,gate-clock", of_ti_gate_clk_setup) + +static void __init of_ti_wait_gate_clk_setup(struct device_node *node) +{ + _of_ti_gate_clk_setup(node, &omap_gate_clk_ops, &clkhwops_wait); +} +CLK_OF_DECLARE(ti_wait_gate_clk, "ti,wait-gate-clock", + of_ti_wait_gate_clk_setup); + +#ifdef CONFIG_ARCH_OMAP3 +static void __init of_ti_am35xx_gate_clk_setup(struct device_node *node) +{ + _of_ti_gate_clk_setup(node, &omap_gate_clk_ops, + &clkhwops_am35xx_ipss_module_wait); +} +CLK_OF_DECLARE(ti_am35xx_gate_clk, "ti,am35xx-gate-clock", + of_ti_am35xx_gate_clk_setup); + +static void __init of_ti_dss_gate_clk_setup(struct device_node *node) +{ + _of_ti_gate_clk_setup(node, &omap_gate_clk_ops, + &clkhwops_omap3430es2_dss_usbhost_wait); +} +CLK_OF_DECLARE(ti_dss_gate_clk, "ti,dss-gate-clock", + of_ti_dss_gate_clk_setup); +#endif diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h index 17fb49e4ff5e..d94feb3b5519 100644 --- a/include/linux/clk/ti.h +++ b/include/linux/clk/ti.h @@ -244,6 +244,8 @@ long omap2_dpll_round_rate(struct clk_hw *hw, unsigned long target_rate, void omap2_init_clk_clkdm(struct clk_hw *clk); unsigned long omap3_clkoutx2_recalc(struct clk_hw *hw, unsigned long parent_rate); +int omap2_clkops_enable_clkdm(struct clk_hw *hw); +void omap2_clkops_disable_clkdm(struct clk_hw *hw); int omap3_dpll4_set_rate(struct clk_hw *clk, unsigned long rate, unsigned long parent_rate); int omap2_dflt_clk_enable(struct clk_hw *hw); @@ -268,5 +270,9 @@ static inline void of_ti_clk_deny_autoidle_all(void) { } extern const struct clk_hw_omap_ops clkhwops_omap3_dpll; extern const struct clk_hw_omap_ops clkhwops_omap4_dpllmx; +extern const struct clk_hw_omap_ops clkhwops_wait; +extern const struct clk_hw_omap_ops clkhwops_omap3430es2_dss_usbhost_wait; +extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait; +extern const struct clk_hw_omap_ops clkhwops_iclk_wait; #endif -- cgit v1.2.3 From 3cd4a596224565cff00b69a02d4b5fa7432ea6d3 Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Wed, 21 Aug 2013 19:39:15 +0300 Subject: CLK: TI: add support for clockdomain binding Some OMAP clocks require knowledge about their parent clockdomain for book keeping purposes. This patch creates a new DT binding for TI clockdomains, which act as a collection of device clocks. Clockdomain itself is rather misleading name for the hardware functionality, as at least on OMAP4 / OMAP5 / DRA7 the clockdomains can be collections of either clocks and/or IP blocks, thus idle-domain or such might be more appropriate. For most cases on these SoCs, the kernel doesn't even need the information and the mappings can be ignored. Signed-off-by: Tero Kristo Acked-by: Tony Lindgren Signed-off-by: Mike Turquette --- .../devicetree/bindings/clock/ti/clockdomain.txt | 24 ++++++++ drivers/clk/ti/Makefile | 2 +- drivers/clk/ti/clockdomain.c | 70 ++++++++++++++++++++++ include/linux/clk/ti.h | 1 + 4 files changed, 96 insertions(+), 1 deletion(-) create mode 100644 Documentation/devicetree/bindings/clock/ti/clockdomain.txt create mode 100644 drivers/clk/ti/clockdomain.c (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/clock/ti/clockdomain.txt b/Documentation/devicetree/bindings/clock/ti/clockdomain.txt new file mode 100644 index 000000000000..cb76b3f2b341 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/ti/clockdomain.txt @@ -0,0 +1,24 @@ +Binding for Texas Instruments clockdomain. + +Binding status: Unstable - ABI compatibility may be broken in the future + +This binding uses the common clock binding[1] in consumer role. +Every clock on TI SoC belongs to one clockdomain, but software +only needs this information for specific clocks which require +their parent clockdomain to be controlled when the clock is +enabled/disabled. This binding doesn't define a new clock +binding type, it is used to group existing clock nodes under +hardware hierarchy. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt + +Required properties: +- compatible : shall be "ti,clockdomain" +- #clock-cells : from common clock binding; shall be set to 0. +- clocks : link phandles of clocks within this domain + +Examples: + dss_clkdm: dss_clkdm { + compatible = "ti,clockdomain"; + clocks = <&dss1_alwon_fck_3430es2>, <&dss_ick_3430es2>; + }; diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile index eaa6dc0aeb75..ae7cd1e91cd2 100644 --- a/drivers/clk/ti/Makefile +++ b/drivers/clk/ti/Makefile @@ -1,5 +1,5 @@ ifneq ($(CONFIG_OF),) -obj-y += clk.o autoidle.o +obj-y += clk.o autoidle.o clockdomain.o clk-common = dpll.o composite.o divider.o gate.o \ fixed-factor.o endif diff --git a/drivers/clk/ti/clockdomain.c b/drivers/clk/ti/clockdomain.c new file mode 100644 index 000000000000..f1e0038d76ac --- /dev/null +++ b/drivers/clk/ti/clockdomain.c @@ -0,0 +1,70 @@ +/* + * OMAP clockdomain support + * + * Copyright (C) 2013 Texas Instruments, Inc. + * + * Tero Kristo + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include + +#undef pr_fmt +#define pr_fmt(fmt) "%s: " fmt, __func__ + +static void __init of_ti_clockdomain_setup(struct device_node *node) +{ + struct clk *clk; + struct clk_hw *clk_hw; + const char *clkdm_name = node->name; + int i; + int num_clks; + + num_clks = of_count_phandle_with_args(node, "clocks", "#clock-cells"); + + for (i = 0; i < num_clks; i++) { + clk = of_clk_get(node, i); + if (__clk_get_flags(clk) & CLK_IS_BASIC) { + pr_warn("can't setup clkdm for basic clk %s\n", + __clk_get_name(clk)); + continue; + } + clk_hw = __clk_get_hw(clk); + to_clk_hw_omap(clk_hw)->clkdm_name = clkdm_name; + omap2_init_clk_clkdm(clk_hw); + } +} + +static struct of_device_id ti_clkdm_match_table[] __initdata = { + { .compatible = "ti,clockdomain" }, + { } +}; + +/** + * ti_dt_clockdomains_setup - setup device tree clockdomains + * + * Initializes clockdomain nodes for a SoC. This parses through all the + * nodes with compatible = "ti,clockdomain", and add the clockdomain + * info for all the clocks listed under these. This function shall be + * called after rest of the DT clock init has completed and all + * clock nodes have been registered. + */ +void __init ti_dt_clockdomains_setup(void) +{ + struct device_node *np; + for_each_matching_node(np, ti_clkdm_match_table) { + of_ti_clockdomain_setup(np); + } +} diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h index d94feb3b5519..a3f89a60de07 100644 --- a/include/linux/clk/ti.h +++ b/include/linux/clk/ti.h @@ -255,6 +255,7 @@ int omap2_dflt_clk_is_enabled(struct clk_hw *hw); void __iomem *ti_clk_get_reg_addr(struct device_node *node, int index); void ti_dt_clocks_register(struct ti_dt_clk *oclks); void ti_dt_clk_init_provider(struct device_node *np, int index); +void ti_dt_clockdomains_setup(void); int ti_clk_retry_init(struct device_node *node, struct clk_hw *hw, ti_of_clk_init_cb_t func); int of_ti_clk_autoidle_setup(struct device_node *node); -- cgit v1.2.3 From 6a369c584fbe98264458b9442e780f8078f2f7ad Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Fri, 13 Sep 2013 20:22:27 +0300 Subject: clk: ti: add support for basic mux clock ti,mux-clock provides now a binding for basic mux support. This is just using the basic clock type. Signed-off-by: Tero Kristo Acked-by: Tony Lindgren Signed-off-by: Mike Turquette --- Documentation/devicetree/bindings/clock/ti/mux.txt | 76 +++++++ drivers/clk/ti/Makefile | 2 +- drivers/clk/ti/composite.c | 2 +- drivers/clk/ti/mux.c | 246 +++++++++++++++++++++ include/linux/clk/ti.h | 1 + 5 files changed, 325 insertions(+), 2 deletions(-) create mode 100644 Documentation/devicetree/bindings/clock/ti/mux.txt create mode 100644 drivers/clk/ti/mux.c (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/clock/ti/mux.txt b/Documentation/devicetree/bindings/clock/ti/mux.txt new file mode 100644 index 000000000000..2d0d170f8001 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/ti/mux.txt @@ -0,0 +1,76 @@ +Binding for TI mux clock. + +Binding status: Unstable - ABI compatibility may be broken in the future + +This binding uses the common clock binding[1]. It assumes a +register-mapped multiplexer with multiple input clock signals or +parents, one of which can be selected as output. This clock does not +gate or adjust the parent rate via a divider or multiplier. + +By default the "clocks" property lists the parents in the same order +as they are programmed into the regster. E.g: + + clocks = <&foo_clock>, <&bar_clock>, <&baz_clock>; + +results in programming the register as follows: + +register value selected parent clock +0 foo_clock +1 bar_clock +2 baz_clock + +Some clock controller IPs do not allow a value of zero to be programmed +into the register, instead indexing begins at 1. The optional property +"index-starts-at-one" modified the scheme as follows: + +register value selected clock parent +1 foo_clock +2 bar_clock +3 baz_clock + +The binding must provide the register to control the mux. Optionally +the number of bits to shift the control field in the register can be +supplied. If the shift value is missing it is the same as supplying +a zero shift. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt + +Required properties: +- compatible : shall be "ti,mux-clock" or "ti,composite-mux-clock". +- #clock-cells : from common clock binding; shall be set to 0. +- clocks : link phandles of parent clocks +- reg : register offset for register controlling adjustable mux + +Optional properties: +- ti,bit-shift : number of bits to shift the bit-mask, defaults to + 0 if not present +- ti,index-starts-at-one : valid input select programming starts at 1, not + zero +- ti,set-rate-parent : clk_set_rate is propagated to parent clock, + not supported by the composite-mux-clock subtype + +Examples: + +sys_clkin_ck: sys_clkin_ck@4a306110 { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&virt_12000000_ck>, <&virt_13000000_ck>, <&virt_16800000_ck>, <&virt_19200000_ck>, <&virt_26000000_ck>, <&virt_27000000_ck>, <&virt_38400000_ck>; + reg = <0x0110>; + ti,index-starts-at-one; +}; + +abe_dpll_bypass_clk_mux_ck: abe_dpll_bypass_clk_mux_ck@4a306108 { + #clock-cells = <0>; + compatible = "ti,mux-clock"; + clocks = <&sys_clkin_ck>, <&sys_32k_ck>; + ti,bit-shift = <24>; + reg = <0x0108>; +}; + +mcbsp5_mux_fck: mcbsp5_mux_fck { + #clock-cells = <0>; + compatible = "ti,composite-mux-clock"; + clocks = <&core_96m_fck>, <&mcbsp_clks>; + ti,bit-shift = <4>; + reg = <0x02d8>; +}; diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile index ae7cd1e91cd2..d98a47fb13a4 100644 --- a/drivers/clk/ti/Makefile +++ b/drivers/clk/ti/Makefile @@ -1,5 +1,5 @@ ifneq ($(CONFIG_OF),) obj-y += clk.o autoidle.o clockdomain.o clk-common = dpll.o composite.o divider.o gate.o \ - fixed-factor.o + fixed-factor.o mux.o endif diff --git a/drivers/clk/ti/composite.c b/drivers/clk/ti/composite.c index ffb8db4829bf..19d8980ba458 100644 --- a/drivers/clk/ti/composite.c +++ b/drivers/clk/ti/composite.c @@ -173,7 +173,7 @@ static void __init ti_clk_register_composite(struct clk_hw *hw, clk = clk_register_composite(NULL, node->name, parent_names, num_parents, _get_hw(cclk, CLK_COMPONENT_TYPE_MUX), - &clk_mux_ops, + &ti_clk_mux_ops, _get_hw(cclk, CLK_COMPONENT_TYPE_DIVIDER), &ti_composite_divider_ops, _get_hw(cclk, CLK_COMPONENT_TYPE_GATE), diff --git a/drivers/clk/ti/mux.c b/drivers/clk/ti/mux.c new file mode 100644 index 000000000000..0197a478720c --- /dev/null +++ b/drivers/clk/ti/mux.c @@ -0,0 +1,246 @@ +/* + * TI Multiplexer Clock + * + * Copyright (C) 2013 Texas Instruments, Inc. + * + * Tero Kristo + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include + +#undef pr_fmt +#define pr_fmt(fmt) "%s: " fmt, __func__ + +#define to_clk_mux(_hw) container_of(_hw, struct clk_mux, hw) + +static u8 ti_clk_mux_get_parent(struct clk_hw *hw) +{ + struct clk_mux *mux = to_clk_mux(hw); + int num_parents = __clk_get_num_parents(hw->clk); + u32 val; + + /* + * FIXME need a mux-specific flag to determine if val is bitwise or + * numeric. e.g. sys_clkin_ck's clksel field is 3 bits wide, but ranges + * from 0x1 to 0x7 (index starts at one) + * OTOH, pmd_trace_clk_mux_ck uses a separate bit for each clock, so + * val = 0x4 really means "bit 2, index starts at bit 0" + */ + val = ti_clk_ll_ops->clk_readl(mux->reg) >> mux->shift; + val &= mux->mask; + + if (mux->table) { + int i; + + for (i = 0; i < num_parents; i++) + if (mux->table[i] == val) + return i; + return -EINVAL; + } + + if (val && (mux->flags & CLK_MUX_INDEX_BIT)) + val = ffs(val) - 1; + + if (val && (mux->flags & CLK_MUX_INDEX_ONE)) + val--; + + if (val >= num_parents) + return -EINVAL; + + return val; +} + +static int ti_clk_mux_set_parent(struct clk_hw *hw, u8 index) +{ + struct clk_mux *mux = to_clk_mux(hw); + u32 val; + unsigned long flags = 0; + + if (mux->table) { + index = mux->table[index]; + } else { + if (mux->flags & CLK_MUX_INDEX_BIT) + index = (1 << ffs(index)); + + if (mux->flags & CLK_MUX_INDEX_ONE) + index++; + } + + if (mux->lock) + spin_lock_irqsave(mux->lock, flags); + + if (mux->flags & CLK_MUX_HIWORD_MASK) { + val = mux->mask << (mux->shift + 16); + } else { + val = ti_clk_ll_ops->clk_readl(mux->reg); + val &= ~(mux->mask << mux->shift); + } + val |= index << mux->shift; + ti_clk_ll_ops->clk_writel(val, mux->reg); + + if (mux->lock) + spin_unlock_irqrestore(mux->lock, flags); + + return 0; +} + +const struct clk_ops ti_clk_mux_ops = { + .get_parent = ti_clk_mux_get_parent, + .set_parent = ti_clk_mux_set_parent, + .determine_rate = __clk_mux_determine_rate, +}; + +static struct clk *_register_mux(struct device *dev, const char *name, + const char **parent_names, u8 num_parents, + unsigned long flags, void __iomem *reg, + u8 shift, u32 mask, u8 clk_mux_flags, + u32 *table, spinlock_t *lock) +{ + struct clk_mux *mux; + struct clk *clk; + struct clk_init_data init; + + /* allocate the mux */ + mux = kzalloc(sizeof(*mux), GFP_KERNEL); + if (!mux) { + pr_err("%s: could not allocate mux clk\n", __func__); + return ERR_PTR(-ENOMEM); + } + + init.name = name; + init.ops = &ti_clk_mux_ops; + init.flags = flags | CLK_IS_BASIC; + init.parent_names = parent_names; + init.num_parents = num_parents; + + /* struct clk_mux assignments */ + mux->reg = reg; + mux->shift = shift; + mux->mask = mask; + mux->flags = clk_mux_flags; + mux->lock = lock; + mux->table = table; + mux->hw.init = &init; + + clk = clk_register(dev, &mux->hw); + + if (IS_ERR(clk)) + kfree(mux); + + return clk; +} + +/** + * of_mux_clk_setup - Setup function for simple mux rate clock + * @node: DT node for the clock + * + * Sets up a basic clock multiplexer. + */ +static void of_mux_clk_setup(struct device_node *node) +{ + struct clk *clk; + void __iomem *reg; + int num_parents; + const char **parent_names; + int i; + u8 clk_mux_flags = 0; + u32 mask = 0; + u32 shift = 0; + u32 flags = 0; + + num_parents = of_clk_get_parent_count(node); + if (num_parents < 2) { + pr_err("mux-clock %s must have parents\n", node->name); + return; + } + parent_names = kzalloc((sizeof(char *) * num_parents), GFP_KERNEL); + if (!parent_names) + goto cleanup; + + for (i = 0; i < num_parents; i++) + parent_names[i] = of_clk_get_parent_name(node, i); + + reg = ti_clk_get_reg_addr(node, 0); + + if (!reg) + goto cleanup; + + of_property_read_u32(node, "ti,bit-shift", &shift); + + if (of_property_read_bool(node, "ti,index-starts-at-one")) + clk_mux_flags |= CLK_MUX_INDEX_ONE; + + if (of_property_read_bool(node, "ti,set-rate-parent")) + flags |= CLK_SET_RATE_PARENT; + + /* Generate bit-mask based on parent info */ + mask = num_parents; + if (!(clk_mux_flags & CLK_MUX_INDEX_ONE)) + mask--; + + mask = (1 << fls(mask)) - 1; + + clk = _register_mux(NULL, node->name, parent_names, num_parents, flags, + reg, shift, mask, clk_mux_flags, NULL, NULL); + + if (!IS_ERR(clk)) + of_clk_add_provider(node, of_clk_src_simple_get, clk); + +cleanup: + kfree(parent_names); +} +CLK_OF_DECLARE(mux_clk, "ti,mux-clock", of_mux_clk_setup); + +static void __init of_ti_composite_mux_clk_setup(struct device_node *node) +{ + struct clk_mux *mux; + int num_parents; + u32 val; + + mux = kzalloc(sizeof(*mux), GFP_KERNEL); + if (!mux) + return; + + mux->reg = ti_clk_get_reg_addr(node, 0); + + if (!mux->reg) + goto cleanup; + + if (!of_property_read_u32(node, "ti,bit-shift", &val)) + mux->shift = val; + + if (of_property_read_bool(node, "ti,index-starts-at-one")) + mux->flags |= CLK_MUX_INDEX_ONE; + + num_parents = of_clk_get_parent_count(node); + + if (num_parents < 2) { + pr_err("%s must have parents\n", node->name); + goto cleanup; + } + + mux->mask = num_parents - 1; + mux->mask = (1 << fls(mux->mask)) - 1; + + if (!ti_clk_add_component(node, &mux->hw, CLK_COMPONENT_TYPE_MUX)) + return; + +cleanup: + kfree(mux); +} +CLK_OF_DECLARE(ti_composite_mux_clk_setup, "ti,composite-mux-clock", + of_ti_composite_mux_clk_setup); diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h index a3f89a60de07..6e205b140071 100644 --- a/include/linux/clk/ti.h +++ b/include/linux/clk/ti.h @@ -224,6 +224,7 @@ struct ti_clk_ll_ops { extern struct ti_clk_ll_ops *ti_clk_ll_ops; extern const struct clk_ops ti_clk_divider_ops; +extern const struct clk_ops ti_clk_mux_ops; #define to_clk_hw_omap(_hw) container_of(_hw, struct clk_hw_omap, hw) -- cgit v1.2.3 From 3cf467a9969db8297dcf783c5b09b0df8fda863b Mon Sep 17 00:00:00 2001 From: J Keerthy Date: Tue, 23 Jul 2013 12:05:37 +0530 Subject: CLK: TI: DRA7: Add APLL support The patch adds support for DRA7 PCIe APLL. The APLL sources the optional functional clocks for PCIe module. APLL stands for Analog PLL. This is different when comapred with DPLL meaning Digital PLL, the phase detection is done using an analog circuit. Signed-off-by: J Keerthy Signed-off-by: Tero Kristo Acked-by: Tony Lindgren Signed-off-by: Mike Turquette --- .../devicetree/bindings/clock/ti/apll.txt | 31 +++ drivers/clk/ti/Makefile | 2 +- drivers/clk/ti/apll.c | 223 +++++++++++++++++++++ 3 files changed, 255 insertions(+), 1 deletion(-) create mode 100644 Documentation/devicetree/bindings/clock/ti/apll.txt create mode 100644 drivers/clk/ti/apll.c (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/clock/ti/apll.txt b/Documentation/devicetree/bindings/clock/ti/apll.txt new file mode 100644 index 000000000000..7faf5a68b3be --- /dev/null +++ b/Documentation/devicetree/bindings/clock/ti/apll.txt @@ -0,0 +1,31 @@ +Binding for Texas Instruments APLL clock. + +Binding status: Unstable - ABI compatibility may be broken in the future + +This binding uses the common clock binding[1]. It assumes a +register-mapped APLL with usually two selectable input clocks +(reference clock and bypass clock), with analog phase locked +loop logic for multiplying the input clock to a desired output +clock. This clock also typically supports different operation +modes (locked, low power stop etc.) APLL mostly behaves like +a subtype of a DPLL [2], although a simplified one at that. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt +[2] Documentation/devicetree/bindings/clock/ti/dpll.txt + +Required properties: +- compatible : shall be "ti,dra7-apll-clock" +- #clock-cells : from common clock binding; shall be set to 0. +- clocks : link phandles of parent clocks (clk-ref and clk-bypass) +- reg : address and length of the register set for controlling the APLL. + It contains the information of registers in the following order: + "control" - contains the control register base address + "idlest" - contains the idlest register base address + +Examples: + apll_pcie_ck: apll_pcie_ck@4a008200 { + #clock-cells = <0>; + clocks = <&apll_pcie_in_clk_mux>, <&dpll_pcie_ref_ck>; + reg = <0x4a00821c 0x4>, <0x4a008220 0x4>; + compatible = "ti,dra7-apll-clock"; + }; diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile index 4a8f846740cb..26e994ac3557 100644 --- a/drivers/clk/ti/Makefile +++ b/drivers/clk/ti/Makefile @@ -1,7 +1,7 @@ ifneq ($(CONFIG_OF),) obj-y += clk.o autoidle.o clockdomain.o clk-common = dpll.o composite.o divider.o gate.o \ - fixed-factor.o mux.o + fixed-factor.o mux.o apll.o obj-$(CONFIG_ARCH_OMAP4) += $(clk-common) clk-44xx.o obj-$(CONFIG_SOC_OMAP5) += $(clk-common) clk-54xx.o endif diff --git a/drivers/clk/ti/apll.c b/drivers/clk/ti/apll.c new file mode 100644 index 000000000000..b986f61f5a77 --- /dev/null +++ b/drivers/clk/ti/apll.c @@ -0,0 +1,223 @@ +/* + * OMAP APLL clock support + * + * Copyright (C) 2013 Texas Instruments, Inc. + * + * J Keerthy + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define APLL_FORCE_LOCK 0x1 +#define APLL_AUTO_IDLE 0x2 +#define MAX_APLL_WAIT_TRIES 1000000 + +#undef pr_fmt +#define pr_fmt(fmt) "%s: " fmt, __func__ + +static int dra7_apll_enable(struct clk_hw *hw) +{ + struct clk_hw_omap *clk = to_clk_hw_omap(hw); + int r = 0, i = 0; + struct dpll_data *ad; + const char *clk_name; + u8 state = 1; + u32 v; + + ad = clk->dpll_data; + if (!ad) + return -EINVAL; + + clk_name = __clk_get_name(clk->hw.clk); + + state <<= __ffs(ad->idlest_mask); + + /* Check is already locked */ + v = ti_clk_ll_ops->clk_readl(ad->idlest_reg); + + if ((v & ad->idlest_mask) == state) + return r; + + v = ti_clk_ll_ops->clk_readl(ad->control_reg); + v &= ~ad->enable_mask; + v |= APLL_FORCE_LOCK << __ffs(ad->enable_mask); + ti_clk_ll_ops->clk_writel(v, ad->control_reg); + + state <<= __ffs(ad->idlest_mask); + + while (1) { + v = ti_clk_ll_ops->clk_readl(ad->idlest_reg); + if ((v & ad->idlest_mask) == state) + break; + if (i > MAX_APLL_WAIT_TRIES) + break; + i++; + udelay(1); + } + + if (i == MAX_APLL_WAIT_TRIES) { + pr_warn("clock: %s failed transition to '%s'\n", + clk_name, (state) ? "locked" : "bypassed"); + } else { + pr_debug("clock: %s transition to '%s' in %d loops\n", + clk_name, (state) ? "locked" : "bypassed", i); + + r = 0; + } + + return r; +} + +static void dra7_apll_disable(struct clk_hw *hw) +{ + struct clk_hw_omap *clk = to_clk_hw_omap(hw); + struct dpll_data *ad; + u8 state = 1; + u32 v; + + ad = clk->dpll_data; + + state <<= __ffs(ad->idlest_mask); + + v = ti_clk_ll_ops->clk_readl(ad->control_reg); + v &= ~ad->enable_mask; + v |= APLL_AUTO_IDLE << __ffs(ad->enable_mask); + ti_clk_ll_ops->clk_writel(v, ad->control_reg); +} + +static int dra7_apll_is_enabled(struct clk_hw *hw) +{ + struct clk_hw_omap *clk = to_clk_hw_omap(hw); + struct dpll_data *ad; + u32 v; + + ad = clk->dpll_data; + + v = ti_clk_ll_ops->clk_readl(ad->control_reg); + v &= ad->enable_mask; + + v >>= __ffs(ad->enable_mask); + + return v == APLL_AUTO_IDLE ? 0 : 1; +} + +static u8 dra7_init_apll_parent(struct clk_hw *hw) +{ + return 0; +} + +static const struct clk_ops apll_ck_ops = { + .enable = &dra7_apll_enable, + .disable = &dra7_apll_disable, + .is_enabled = &dra7_apll_is_enabled, + .get_parent = &dra7_init_apll_parent, +}; + +static void __init omap_clk_register_apll(struct clk_hw *hw, + struct device_node *node) +{ + struct clk_hw_omap *clk_hw = to_clk_hw_omap(hw); + struct dpll_data *ad = clk_hw->dpll_data; + struct clk *clk; + + ad->clk_ref = of_clk_get(node, 0); + ad->clk_bypass = of_clk_get(node, 1); + + if (IS_ERR(ad->clk_ref) || IS_ERR(ad->clk_bypass)) { + pr_debug("clk-ref or clk-bypass for %s not ready, retry\n", + node->name); + if (!ti_clk_retry_init(node, hw, omap_clk_register_apll)) + return; + + goto cleanup; + } + + clk = clk_register(NULL, &clk_hw->hw); + if (!IS_ERR(clk)) { + of_clk_add_provider(node, of_clk_src_simple_get, clk); + kfree(clk_hw->hw.init->parent_names); + kfree(clk_hw->hw.init); + return; + } + +cleanup: + kfree(clk_hw->dpll_data); + kfree(clk_hw->hw.init->parent_names); + kfree(clk_hw->hw.init); + kfree(clk_hw); +} + +static void __init of_dra7_apll_setup(struct device_node *node) +{ + struct dpll_data *ad = NULL; + struct clk_hw_omap *clk_hw = NULL; + struct clk_init_data *init = NULL; + const char **parent_names = NULL; + int i; + + ad = kzalloc(sizeof(*ad), GFP_KERNEL); + clk_hw = kzalloc(sizeof(*clk_hw), GFP_KERNEL); + init = kzalloc(sizeof(*init), GFP_KERNEL); + if (!ad || !clk_hw || !init) + goto cleanup; + + clk_hw->dpll_data = ad; + clk_hw->hw.init = init; + clk_hw->flags = MEMMAP_ADDRESSING; + + init->name = node->name; + init->ops = &apll_ck_ops; + + init->num_parents = of_clk_get_parent_count(node); + if (init->num_parents < 1) { + pr_err("dra7 apll %s must have parent(s)\n", node->name); + goto cleanup; + } + + parent_names = kzalloc(sizeof(char *) * init->num_parents, GFP_KERNEL); + if (!parent_names) + goto cleanup; + + for (i = 0; i < init->num_parents; i++) + parent_names[i] = of_clk_get_parent_name(node, i); + + init->parent_names = parent_names; + + ad->control_reg = ti_clk_get_reg_addr(node, 0); + ad->idlest_reg = ti_clk_get_reg_addr(node, 1); + + if (!ad->control_reg || !ad->idlest_reg) + goto cleanup; + + ad->idlest_mask = 0x1; + ad->enable_mask = 0x3; + + omap_clk_register_apll(&clk_hw->hw, node); + return; + +cleanup: + kfree(parent_names); + kfree(ad); + kfree(clk_hw); + kfree(init); +} +CLK_OF_DECLARE(dra7_apll_clock, "ti,dra7-apll-clock", of_dra7_apll_setup); -- cgit v1.2.3 From 24582b3407775d57f06becfccd8cd202bc01eda6 Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Mon, 15 Jul 2013 13:14:20 +0300 Subject: CLK: TI: add interface clock support for OMAP3 OMAP3 has interface clocks in addition to functional clocks, which require special handling for the autoidle and idle status register offsets mainly. Signed-off-by: Tero Kristo Acked-by: Tony Lindgren Signed-off-by: Mike Turquette --- .../devicetree/bindings/clock/ti/interface.txt | 54 +++++++++ arch/arm/mach-omap2/clock.h | 5 - drivers/clk/ti/Makefile | 1 + drivers/clk/ti/interface.c | 125 +++++++++++++++++++++ include/linux/clk/ti.h | 5 + 5 files changed, 185 insertions(+), 5 deletions(-) create mode 100644 Documentation/devicetree/bindings/clock/ti/interface.txt create mode 100644 drivers/clk/ti/interface.c (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/clock/ti/interface.txt b/Documentation/devicetree/bindings/clock/ti/interface.txt new file mode 100644 index 000000000000..064e8caccac3 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/ti/interface.txt @@ -0,0 +1,54 @@ +Binding for Texas Instruments interface clock. + +Binding status: Unstable - ABI compatibility may be broken in the future + +This binding uses the common clock binding[1]. This clock is +quite much similar to the basic gate-clock [2], however, +it supports a number of additional features, including +companion clock finding (match corresponding functional gate +clock) and hardware autoidle enable / disable. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt +[2] Documentation/devicetree/bindings/clock/gate-clock.txt + +Required properties: +- compatible : shall be one of: + "ti,omap3-interface-clock" - basic OMAP3 interface clock + "ti,omap3-no-wait-interface-clock" - interface clock which has no hardware + capability for waiting clock to be ready + "ti,omap3-hsotgusb-interface-clock" - interface clock with USB specific HW + handling + "ti,omap3-dss-interface-clock" - interface clock with DSS specific HW handling + "ti,omap3-ssi-interface-clock" - interface clock with SSI specific HW handling + "ti,am35xx-interface-clock" - interface clock with AM35xx specific HW handling +- #clock-cells : from common clock binding; shall be set to 0 +- clocks : link to phandle of parent clock +- reg : base address for the control register + +Optional properties: +- ti,bit-shift : bit shift for the bit enabling/disabling the clock (default 0) + +Examples: + aes1_ick: aes1_ick@48004a14 { + #clock-cells = <0>; + compatible = "ti,omap3-interface-clock"; + clocks = <&security_l4_ick2>; + reg = <0x48004a14 0x4>; + ti,bit-shift = <3>; + }; + + cam_ick: cam_ick@48004f10 { + #clock-cells = <0>; + compatible = "ti,omap3-no-wait-interface-clock"; + clocks = <&l4_ick>; + reg = <0x48004f10 0x4>; + ti,bit-shift = <0>; + }; + + ssi_ick_3430es2: ssi_ick_3430es2@48004a10 { + #clock-cells = <0>; + compatible = "ti,omap3-ssi-interface-clock"; + clocks = <&ssi_l4_ick>; + reg = <0x48004a10 0x4>; + ti,bit-shift = <0>; + }; diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h index 1da9dc32fa4e..cbe5ff770ec4 100644 --- a/arch/arm/mach-omap2/clock.h +++ b/arch/arm/mach-omap2/clock.h @@ -270,15 +270,10 @@ extern struct clk dummy_ck; extern const struct clk_hw_omap_ops clkhwops_iclk_wait; extern const struct clk_hw_omap_ops clkhwops_wait; -extern const struct clk_hw_omap_ops clkhwops_iclk; extern const struct clk_hw_omap_ops clkhwops_omap3430es2_ssi_wait; -extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_ssi_wait; extern const struct clk_hw_omap_ops clkhwops_omap3430es2_dss_usbhost_wait; -extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_dss_usbhost_wait; -extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_hsotgusb_wait; extern const struct clk_hw_omap_ops clkhwops_omap3430es2_hsotgusb_wait; extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait; -extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_wait; extern const struct clk_hw_omap_ops clkhwops_apll54; extern const struct clk_hw_omap_ops clkhwops_apll96; extern const struct clk_hw_omap_ops clkhwops_omap2xxx_dpll; diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile index 51b00f80cc14..fff97f6aa8cb 100644 --- a/drivers/clk/ti/Makefile +++ b/drivers/clk/ti/Makefile @@ -3,6 +3,7 @@ obj-y += clk.o autoidle.o clockdomain.o clk-common = dpll.o composite.o divider.o gate.o \ fixed-factor.o mux.o apll.o obj-$(CONFIG_SOC_AM33XX) += $(clk-common) clk-33xx.o +obj-$(CONFIG_ARCH_OMAP3) += $(clk-common) interface.o obj-$(CONFIG_ARCH_OMAP4) += $(clk-common) clk-44xx.o obj-$(CONFIG_SOC_OMAP5) += $(clk-common) clk-54xx.o obj-$(CONFIG_SOC_DRA7XX) += $(clk-common) clk-7xx.o diff --git a/drivers/clk/ti/interface.c b/drivers/clk/ti/interface.c new file mode 100644 index 000000000000..320a2b168bb2 --- /dev/null +++ b/drivers/clk/ti/interface.c @@ -0,0 +1,125 @@ +/* + * OMAP interface clock support + * + * Copyright (C) 2013 Texas Instruments, Inc. + * + * Tero Kristo + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include + +#undef pr_fmt +#define pr_fmt(fmt) "%s: " fmt, __func__ + +static const struct clk_ops ti_interface_clk_ops = { + .init = &omap2_init_clk_clkdm, + .enable = &omap2_dflt_clk_enable, + .disable = &omap2_dflt_clk_disable, + .is_enabled = &omap2_dflt_clk_is_enabled, +}; + +static void __init _of_ti_interface_clk_setup(struct device_node *node, + const struct clk_hw_omap_ops *ops) +{ + struct clk *clk; + struct clk_init_data init = { NULL }; + struct clk_hw_omap *clk_hw; + const char *parent_name; + u32 val; + + clk_hw = kzalloc(sizeof(*clk_hw), GFP_KERNEL); + if (!clk_hw) + return; + + clk_hw->hw.init = &init; + clk_hw->ops = ops; + clk_hw->flags = MEMMAP_ADDRESSING; + + clk_hw->enable_reg = ti_clk_get_reg_addr(node, 0); + if (!clk_hw->enable_reg) + goto cleanup; + + if (!of_property_read_u32(node, "ti,bit-shift", &val)) + clk_hw->enable_bit = val; + + init.name = node->name; + init.ops = &ti_interface_clk_ops; + init.flags = 0; + + parent_name = of_clk_get_parent_name(node, 0); + if (!parent_name) { + pr_err("%s must have a parent\n", node->name); + goto cleanup; + } + + init.num_parents = 1; + init.parent_names = &parent_name; + + clk = clk_register(NULL, &clk_hw->hw); + + if (!IS_ERR(clk)) { + of_clk_add_provider(node, of_clk_src_simple_get, clk); + omap2_init_clk_hw_omap_clocks(clk); + return; + } + +cleanup: + kfree(clk_hw); +} + +static void __init of_ti_interface_clk_setup(struct device_node *node) +{ + _of_ti_interface_clk_setup(node, &clkhwops_iclk_wait); +} +CLK_OF_DECLARE(ti_interface_clk, "ti,omap3-interface-clock", + of_ti_interface_clk_setup); + +static void __init of_ti_no_wait_interface_clk_setup(struct device_node *node) +{ + _of_ti_interface_clk_setup(node, &clkhwops_iclk); +} +CLK_OF_DECLARE(ti_no_wait_interface_clk, "ti,omap3-no-wait-interface-clock", + of_ti_no_wait_interface_clk_setup); + +static void __init of_ti_hsotgusb_interface_clk_setup(struct device_node *node) +{ + _of_ti_interface_clk_setup(node, + &clkhwops_omap3430es2_iclk_hsotgusb_wait); +} +CLK_OF_DECLARE(ti_hsotgusb_interface_clk, "ti,omap3-hsotgusb-interface-clock", + of_ti_hsotgusb_interface_clk_setup); + +static void __init of_ti_dss_interface_clk_setup(struct device_node *node) +{ + _of_ti_interface_clk_setup(node, + &clkhwops_omap3430es2_iclk_dss_usbhost_wait); +} +CLK_OF_DECLARE(ti_dss_interface_clk, "ti,omap3-dss-interface-clock", + of_ti_dss_interface_clk_setup); + +static void __init of_ti_ssi_interface_clk_setup(struct device_node *node) +{ + _of_ti_interface_clk_setup(node, &clkhwops_omap3430es2_iclk_ssi_wait); +} +CLK_OF_DECLARE(ti_ssi_interface_clk, "ti,omap3-ssi-interface-clock", + of_ti_ssi_interface_clk_setup); + +static void __init of_ti_am35xx_interface_clk_setup(struct device_node *node) +{ + _of_ti_interface_clk_setup(node, &clkhwops_am35xx_ipss_wait); +} +CLK_OF_DECLARE(ti_am35xx_interface_clk, "ti,am35xx-interface-clock", + of_ti_am35xx_interface_clk_setup); diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h index 0e7c8d956f2b..17c034ea03ad 100644 --- a/include/linux/clk/ti.h +++ b/include/linux/clk/ti.h @@ -282,6 +282,11 @@ extern const struct clk_hw_omap_ops clkhwops_omap4_dpllmx; extern const struct clk_hw_omap_ops clkhwops_wait; extern const struct clk_hw_omap_ops clkhwops_omap3430es2_dss_usbhost_wait; extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_module_wait; +extern const struct clk_hw_omap_ops clkhwops_am35xx_ipss_wait; +extern const struct clk_hw_omap_ops clkhwops_iclk; extern const struct clk_hw_omap_ops clkhwops_iclk_wait; +extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_ssi_wait; +extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_dss_usbhost_wait; +extern const struct clk_hw_omap_ops clkhwops_omap3430es2_iclk_hsotgusb_wait; #endif -- cgit v1.2.3