From a6e2f029ae34f41adb6ae3812c32c5d326e1abd2 Mon Sep 17 00:00:00 2001 From: Chris Metcalf Date: Wed, 29 Apr 2015 12:48:40 -0400 Subject: Make asm/word-at-a-time.h available on all architectures Added the x86 implementation of word-at-a-time to the generic version, which previously only supported big-endian. Omitted the x86-specific load_unaligned_zeropad(), which in any case is also not present for the existing BE-only implementation of a word-at-a-time, and is only used under CONFIG_DCACHE_WORD_ACCESS. Added as a "generic-y" to the Kbuilds of all architectures that didn't previously have it. Signed-off-by: Chris Metcalf --- arch/mips/include/asm/Kbuild | 1 + 1 file changed, 1 insertion(+) (limited to 'arch/mips') diff --git a/arch/mips/include/asm/Kbuild b/arch/mips/include/asm/Kbuild index 7fe5c61a3cb8..dee810fa973e 100644 --- a/arch/mips/include/asm/Kbuild +++ b/arch/mips/include/asm/Kbuild @@ -17,4 +17,5 @@ generic-y += serial.h generic-y += trace_clock.h generic-y += ucontext.h generic-y += user.h +generic-y += word-at-a-time.h generic-y += xor.h -- cgit v1.2.3 From 237865f195f6b10e4724ce49eeb3972641da882a Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Tue, 15 Sep 2015 13:18:04 -0500 Subject: PCI: Revert "PCI: Call pci_read_bridge_bases() from core instead of arch code" Revert dff22d2054b5 ("PCI: Call pci_read_bridge_bases() from core instead of arch code"). Reading PCI bridge windows is not arch-specific in itself, but there is PCI core code that doesn't work correctly if we read them too early. For example, Hannes found this case on an ARM Freescale i.mx6 board: pci_bus 0000:00: root bus resource [mem 0x01000000-0x01efffff] pci 0000:00:00.0: PCI bridge to [bus 01-ff] pci 0000:00:00.0: BAR 8: no space for [mem size 0x01000000] (mem window) pci 0000:01:00.0: BAR 2: failed to assign [mem size 0x00200000] pci 0000:01:00.0: BAR 1: failed to assign [mem size 0x00004000] pci 0000:01:00.0: BAR 0: failed to assign [mem size 0x00000100] The 00:00.0 mem window needs to be at least 3MB: the 01:00.0 device needs 0x204100 of space, and mem windows are megabyte-aligned. Bus sizing can increase a bridge window size, but never *decrease* it (see d65245c3297a ("PCI: don't shrink bridge resources")). Prior to dff22d2054b5, ARM didn't read bridge windows at all, so the "original size" was zero, and we assigned a 3MB window. After dff22d2054b5, we read the bridge windows before sizing the bus. The firmware programmed a 16MB window (size 0x01000000) in 00:00.0, and since we never decrease the size, we kept 16MB even though we only needed 3MB. But 16MB doesn't fit in the host bridge aperture, so we failed to assign space for the window and the downstream devices. I think this is a defect in the PCI core: we shouldn't rely on the firmware to assign sensible windows. Ray reported a similar problem, also on ARM, with Broadcom iProc. Issues like this are too hard to fix right now, so revert dff22d2054b5. Reported-by: Hannes Reported-by: Ray Jui Link: http://lkml.kernel.org/r/CAAa04yFQEUJm7Jj1qMT57-LG7ZGtnhNDBe=PpSRa70Mj+XhW-A@mail.gmail.com Link: http://lkml.kernel.org/r/55F75BB8.4070405@broadcom.com Signed-off-by: Bjorn Helgaas Acked-by: Yinghai Lu Acked-by: Lorenzo Pieralisi --- arch/alpha/kernel/pci.c | 7 ++++++- arch/frv/mb93090-mb00/pci-vdk.c | 2 ++ arch/ia64/pci/pci.c | 5 +++-- arch/microblaze/pci/pci-common.c | 9 ++++++++- arch/mips/pci/pci.c | 6 ++++++ arch/mn10300/unit-asb2305/pci.c | 1 + arch/powerpc/kernel/pci-common.c | 8 +++++++- arch/x86/pci/common.c | 1 + arch/xtensa/kernel/pci.c | 4 ++++ drivers/parisc/dino.c | 3 +++ drivers/parisc/lba_pci.c | 1 + drivers/pci/probe.c | 6 ------ 12 files changed, 42 insertions(+), 11 deletions(-) (limited to 'arch/mips') diff --git a/arch/alpha/kernel/pci.c b/arch/alpha/kernel/pci.c index cded02c890aa..5f387ee5b5c5 100644 --- a/arch/alpha/kernel/pci.c +++ b/arch/alpha/kernel/pci.c @@ -242,7 +242,12 @@ pci_restore_srm_config(void) void pcibios_fixup_bus(struct pci_bus *bus) { - struct pci_dev *dev; + struct pci_dev *dev = bus->self; + + if (pci_has_flag(PCI_PROBE_ONLY) && dev && + (dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) { + pci_read_bridge_bases(bus); + } list_for_each_entry(dev, &bus->devices, bus_list) { pdev_save_srm_config(dev); diff --git a/arch/frv/mb93090-mb00/pci-vdk.c b/arch/frv/mb93090-mb00/pci-vdk.c index f9c86c475bbd..f211839e2cae 100644 --- a/arch/frv/mb93090-mb00/pci-vdk.c +++ b/arch/frv/mb93090-mb00/pci-vdk.c @@ -294,6 +294,8 @@ void pcibios_fixup_bus(struct pci_bus *bus) printk("### PCIBIOS_FIXUP_BUS(%d)\n",bus->number); #endif + pci_read_bridge_bases(bus); + if (bus->number == 0) { struct pci_dev *dev; list_for_each_entry(dev, &bus->devices, bus_list) { diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c index d89b6013c941..7cc3be9fa7c6 100644 --- a/arch/ia64/pci/pci.c +++ b/arch/ia64/pci/pci.c @@ -533,9 +533,10 @@ void pcibios_fixup_bus(struct pci_bus *b) { struct pci_dev *dev; - if (b->self) + if (b->self) { + pci_read_bridge_bases(b); pcibios_fixup_bridge_resources(b->self); - + } list_for_each_entry(dev, &b->devices, bus_list) pcibios_fixup_device_resources(dev); platform_pci_fixup_bus(b); diff --git a/arch/microblaze/pci/pci-common.c b/arch/microblaze/pci/pci-common.c index 6b8b75266801..ae838ed5fcf2 100644 --- a/arch/microblaze/pci/pci-common.c +++ b/arch/microblaze/pci/pci-common.c @@ -863,7 +863,14 @@ void pcibios_setup_bus_devices(struct pci_bus *bus) void pcibios_fixup_bus(struct pci_bus *bus) { - /* Fixup the bus */ + /* When called from the generic PCI probe, read PCI<->PCI bridge + * bases. This is -not- called when generating the PCI tree from + * the OF device-tree. + */ + if (bus->self != NULL) + pci_read_bridge_bases(bus); + + /* Now fixup the bus bus */ pcibios_setup_bus_self(bus); /* Now fixup devices on that bus */ diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c index c6996cf67a5c..b8a0bf5766f2 100644 --- a/arch/mips/pci/pci.c +++ b/arch/mips/pci/pci.c @@ -311,6 +311,12 @@ int pcibios_enable_device(struct pci_dev *dev, int mask) void pcibios_fixup_bus(struct pci_bus *bus) { + struct pci_dev *dev = bus->self; + + if (pci_has_flag(PCI_PROBE_ONLY) && dev && + (dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) { + pci_read_bridge_bases(bus); + } } EXPORT_SYMBOL(PCIBIOS_MIN_IO); diff --git a/arch/mn10300/unit-asb2305/pci.c b/arch/mn10300/unit-asb2305/pci.c index deaa893efba5..3dfe2d31c67b 100644 --- a/arch/mn10300/unit-asb2305/pci.c +++ b/arch/mn10300/unit-asb2305/pci.c @@ -324,6 +324,7 @@ void pcibios_fixup_bus(struct pci_bus *bus) struct pci_dev *dev; if (bus->self) { + pci_read_bridge_bases(bus); pcibios_fixup_bridge_resources(bus->self); } diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c index a1d0632d97c6..7587b2ae5f77 100644 --- a/arch/powerpc/kernel/pci-common.c +++ b/arch/powerpc/kernel/pci-common.c @@ -1032,7 +1032,13 @@ void pcibios_set_master(struct pci_dev *dev) void pcibios_fixup_bus(struct pci_bus *bus) { - /* Fixup the bus */ + /* When called from the generic PCI probe, read PCI<->PCI bridge + * bases. This is -not- called when generating the PCI tree from + * the OF device-tree. + */ + pci_read_bridge_bases(bus); + + /* Now fixup the bus bus */ pcibios_setup_bus_self(bus); /* Now fixup devices on that bus */ diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c index 09d3afc0a181..dc78a4a9a466 100644 --- a/arch/x86/pci/common.c +++ b/arch/x86/pci/common.c @@ -166,6 +166,7 @@ void pcibios_fixup_bus(struct pci_bus *b) { struct pci_dev *dev; + pci_read_bridge_bases(b); list_for_each_entry(dev, &b->devices, bus_list) pcibios_fixup_device_resources(dev); } diff --git a/arch/xtensa/kernel/pci.c b/arch/xtensa/kernel/pci.c index d27b4dcf221f..b848cc3dc913 100644 --- a/arch/xtensa/kernel/pci.c +++ b/arch/xtensa/kernel/pci.c @@ -210,6 +210,10 @@ subsys_initcall(pcibios_init); void pcibios_fixup_bus(struct pci_bus *bus) { + if (bus->parent) { + /* This is a subordinate bridge */ + pci_read_bridge_bases(bus); + } } void pcibios_set_master(struct pci_dev *dev) diff --git a/drivers/parisc/dino.c b/drivers/parisc/dino.c index baec33c4e698..a0580afe1713 100644 --- a/drivers/parisc/dino.c +++ b/drivers/parisc/dino.c @@ -560,6 +560,9 @@ dino_fixup_bus(struct pci_bus *bus) } else if (bus->parent) { int i; + pci_read_bridge_bases(bus); + + for(i = PCI_BRIDGE_RESOURCES; i < PCI_NUM_RESOURCES; i++) { if((bus->self->resource[i].flags & (IORESOURCE_IO | IORESOURCE_MEM)) == 0) diff --git a/drivers/parisc/lba_pci.c b/drivers/parisc/lba_pci.c index 7b9e89ba0465..a32c1f6c252c 100644 --- a/drivers/parisc/lba_pci.c +++ b/drivers/parisc/lba_pci.c @@ -693,6 +693,7 @@ lba_fixup_bus(struct pci_bus *bus) if (bus->parent) { int i; /* PCI-PCI Bridge */ + pci_read_bridge_bases(bus); for (i = PCI_BRIDGE_RESOURCES; i < PCI_NUM_RESOURCES; i++) pci_claim_bridge_resource(bus->self, i); } else { diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index 0b2be174d981..c8cc0e62a7b9 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -855,9 +855,6 @@ int pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max, int pass) child->bridge_ctl = bctl; } - /* Read and initialize bridge resources */ - pci_read_bridge_bases(child); - cmax = pci_scan_child_bus(child); if (cmax > subordinate) dev_warn(&dev->dev, "bridge has subordinate %02x but max busn %02x\n", @@ -918,9 +915,6 @@ int pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max, int pass) if (!is_cardbus) { child->bridge_ctl = bctl; - - /* Read and initialize bridge resources */ - pci_read_bridge_bases(child); max = pci_scan_child_bus(child); } else { /* -- cgit v1.2.3 From fc2ca674470bbfe11d72a20a3f19fd3dc43bfca0 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Sun, 30 Aug 2015 21:19:58 -0700 Subject: MIPS: Fix console output for Fulong2e system Commit 3adeb2566b9b ("MIPS: Loongson: Improve LEFI firmware interface") made the number of UARTs dynamic if LEFI_FIRMWARE_INTERFACE is configured. Unfortunately, it did not initialize the number of UARTs if LEFI_FIRMWARE_INTERFACE is not configured. As a result, the Fulong2e system has no console. Fixes: 3adeb2566b9b ("MIPS: Loongson: Improve LEFI firmware interface") Acked-by: Huacai Chen Signed-off-by: Guenter Roeck Tested-by: Markos Chandras Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11076/ Signed-off-by: Ralf Baechle --- arch/mips/loongson64/common/env.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch/mips') diff --git a/arch/mips/loongson64/common/env.c b/arch/mips/loongson64/common/env.c index f6c44dd332e2..d6d07ad56180 100644 --- a/arch/mips/loongson64/common/env.c +++ b/arch/mips/loongson64/common/env.c @@ -64,6 +64,9 @@ void __init prom_init_env(void) } if (memsize == 0) memsize = 256; + + loongson_sysconf.nr_uarts = 1; + pr_info("memsize=%u, highmemsize=%u\n", memsize, highmemsize); #else struct boot_params *boot_p; -- cgit v1.2.3 From 88d3426942d748b90b051b7ef2d5d765f5f3054c Mon Sep 17 00:00:00 2001 From: Alexander Sverdlin Date: Thu, 3 Sep 2015 08:36:35 +0200 Subject: MIPS: bootmem: Fix mapstart calculation for contiguous maps Commit a6335fa1 fixed the case with gap between initrd and next usable PFN zone, but broken the case when initrd is combined with usable memory into one region (in add_memory_region()). Restore the fixup initially brought in by f9a7febd. ---- error message ---- Unpacking initramfs... Initramfs unpacking failed: junk in compressed archive BUG: Bad page state in process swapper pfn:00261 page:81004c20 count:0 mapcount:-127 mapping: (null) index:0x2 flags: 0x0() page dumped because: nonzero mapcount CPU: 0 PID: 1 Comm: swapper Not tainted 4.2.0+ #1782 ----------------------- Signed-off-by: Alexander Sverdlin Reported-by: Tony Wu Tested-by: Tony Wu Cc: David Daney Cc: Zubair Lutfullah Kakakhel Cc: Huacai Chen Cc: Joe Perches Cc: Steven J. Hill Cc: Aaro Koskinen Cc: stable@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11086/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/setup.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) (limited to 'arch/mips') diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c index 35b8316002f8..479515109e5b 100644 --- a/arch/mips/kernel/setup.c +++ b/arch/mips/kernel/setup.c @@ -338,7 +338,7 @@ static void __init bootmem_init(void) if (end <= reserved_end) continue; #ifdef CONFIG_BLK_DEV_INITRD - /* mapstart should be after initrd_end */ + /* Skip zones before initrd and initrd itself */ if (initrd_end && end <= (unsigned long)PFN_UP(__pa(initrd_end))) continue; #endif @@ -371,6 +371,14 @@ static void __init bootmem_init(void) max_low_pfn = PFN_DOWN(HIGHMEM_START); } +#ifdef CONFIG_BLK_DEV_INITRD + /* + * mapstart should be after initrd_end + */ + if (initrd_end) + mapstart = max(mapstart, (unsigned long)PFN_UP(__pa(initrd_end))); +#endif + /* * Initialize the boot-time allocator with low memory only. */ -- cgit v1.2.3 From faa9724a674e5e52316bb0d173aed16bd17d536c Mon Sep 17 00:00:00 2001 From: Aurelien Jarno Date: Sat, 5 Sep 2015 18:46:56 +0200 Subject: MIPS: BPF: Avoid unreachable code on little endian On little endian, avoid generating the big endian version of the code by using #else in addition to #ifdef #endif. Also fix one alignment issue wrt delay slot. Signed-off-by: Aurelien Jarno Reviewed-by: Markos Chandras Cc: stable@vger.kernel.org # v4.2+ Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11097/ Signed-off-by: Ralf Baechle --- arch/mips/net/bpf_jit_asm.S | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/net/bpf_jit_asm.S b/arch/mips/net/bpf_jit_asm.S index e92726099be0..4f54cb18f104 100644 --- a/arch/mips/net/bpf_jit_asm.S +++ b/arch/mips/net/bpf_jit_asm.S @@ -151,9 +151,10 @@ NESTED(bpf_slow_path_word, (6 * SZREG), $r_sp) wsbh t0, $r_s0 jr $r_ra rotr $r_A, t0, 16 -#endif +#else jr $r_ra - move $r_A, $r_s0 + move $r_A, $r_s0 +#endif END(bpf_slow_path_word) @@ -162,9 +163,10 @@ NESTED(bpf_slow_path_half, (6 * SZREG), $r_sp) #ifdef CONFIG_CPU_LITTLE_ENDIAN jr $r_ra wsbh $r_A, $r_s0 -#endif +#else jr $r_ra move $r_A, $r_s0 +#endif END(bpf_slow_path_half) -- cgit v1.2.3 From b259e51f2e29390518021f9b8df55a3de42f371b Mon Sep 17 00:00:00 2001 From: Aurelien Jarno Date: Sat, 5 Sep 2015 18:46:57 +0200 Subject: MIPS: BPF: Fix build on pre-R2 little endian CPUs The rotr, seh and wsbh instructions have been introduced with the R2 ISA. Thus the current BPF code fails to build on pre-R2 little endian CPUs: CC arch/mips/net/bpf_jit.o AS arch/mips/net/bpf_jit_asm.o /home/aurel32/linux-4.2/arch/mips/net/bpf_jit_asm.S: Assembler messages: /home/aurel32/linux-4.2/arch/mips/net/bpf_jit_asm.S:67: Error: opcode not supported on this processor: mips32 (mips32) `wsbh $8,$19' /home/aurel32/linux-4.2/arch/mips/net/bpf_jit_asm.S:68: Error: opcode not supported on this processor: mips32 (mips32) `rotr $19,$8,16' /home/aurel32/linux-4.2/arch/mips/net/bpf_jit_asm.S:83: Error: opcode not supported on this processor: mips32 (mips32) `wsbh $8,$19' /home/aurel32/linux-4.2/arch/mips/net/bpf_jit_asm.S:84: Error: opcode not supported on this processor: mips32 (mips32) `seh $19,$8' /home/aurel32/linux-4.2/arch/mips/net/bpf_jit_asm.S:151: Error: opcode not supported on this processor: mips32 (mips32) `wsbh $8,$12' /home/aurel32/linux-4.2/arch/mips/net/bpf_jit_asm.S:153: Error: opcode not supported on this processor: mips32 (mips32) `rotr $19,$8,16' /home/aurel32/linux-4.2/arch/mips/net/bpf_jit_asm.S:164: Error: opcode not supported on this processor: mips32 (mips32) `wsbh $19,$12' /home/aurel32/linux-4.2/scripts/Makefile.build:294: recipe for target 'arch/mips/net/bpf_jit_asm.o' failed Fix that by providing equivalent code for these CPUs. Signed-off-by: Aurelien Jarno Reviewed-by: Markos Chandras Cc: stable@vger.kernel.org # v4.2+ Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11098/ Signed-off-by: Ralf Baechle --- arch/mips/net/bpf_jit_asm.S | 42 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 42 insertions(+) (limited to 'arch/mips') diff --git a/arch/mips/net/bpf_jit_asm.S b/arch/mips/net/bpf_jit_asm.S index 4f54cb18f104..dabf4179cd7e 100644 --- a/arch/mips/net/bpf_jit_asm.S +++ b/arch/mips/net/bpf_jit_asm.S @@ -64,8 +64,20 @@ sk_load_word_positive: PTR_ADDU t1, $r_skb_data, offset lw $r_A, 0(t1) #ifdef CONFIG_CPU_LITTLE_ENDIAN +# if defined(__mips_isa_rev) && (__mips_isa_rev >= 2) wsbh t0, $r_A rotr $r_A, t0, 16 +# else + sll t0, $r_A, 24 + srl t1, $r_A, 24 + srl t2, $r_A, 8 + or t0, t0, t1 + andi t2, t2, 0xff00 + andi t1, $r_A, 0xff00 + or t0, t0, t2 + sll t1, t1, 8 + or $r_A, t0, t1 +# endif #endif jr $r_ra move $r_ret, zero @@ -80,8 +92,16 @@ sk_load_half_positive: PTR_ADDU t1, $r_skb_data, offset lh $r_A, 0(t1) #ifdef CONFIG_CPU_LITTLE_ENDIAN +# if defined(__mips_isa_rev) && (__mips_isa_rev >= 2) wsbh t0, $r_A seh $r_A, t0 +# else + sll t0, $r_A, 24 + andi t1, $r_A, 0xff00 + sra t0, t0, 16 + srl t1, t1, 8 + or $r_A, t0, t1 +# endif #endif jr $r_ra move $r_ret, zero @@ -148,9 +168,22 @@ sk_load_byte_positive: NESTED(bpf_slow_path_word, (6 * SZREG), $r_sp) bpf_slow_path_common(4) #ifdef CONFIG_CPU_LITTLE_ENDIAN +# if defined(__mips_isa_rev) && (__mips_isa_rev >= 2) wsbh t0, $r_s0 jr $r_ra rotr $r_A, t0, 16 +# else + sll t0, $r_s0, 24 + srl t1, $r_s0, 24 + srl t2, $r_s0, 8 + or t0, t0, t1 + andi t2, t2, 0xff00 + andi t1, $r_s0, 0xff00 + or t0, t0, t2 + sll t1, t1, 8 + jr $r_ra + or $r_A, t0, t1 +# endif #else jr $r_ra move $r_A, $r_s0 @@ -161,8 +194,17 @@ NESTED(bpf_slow_path_word, (6 * SZREG), $r_sp) NESTED(bpf_slow_path_half, (6 * SZREG), $r_sp) bpf_slow_path_common(2) #ifdef CONFIG_CPU_LITTLE_ENDIAN +# if defined(__mips_isa_rev) && (__mips_isa_rev >= 2) jr $r_ra wsbh $r_A, $r_s0 +# else + sll t0, $r_s0, 8 + andi t1, $r_s0, 0xff00 + andi t0, t0, 0xff00 + srl t1, t1, 8 + jr $r_ra + or $r_A, t0, t1 +# endif #else jr $r_ra move $r_A, $r_s0 -- cgit v1.2.3 From 84dedd71cf3bc61cc65ca43a48f7252344a1bb68 Mon Sep 17 00:00:00 2001 From: Alexander Couzens Date: Sat, 19 Sep 2015 06:26:19 +0200 Subject: MIPS: ATH79: Set missing irq ack handler for ar7100-misc-intc irq chip The irq ack handler was forgotten while introducing OF support. Only ar71xx and ar933x based devices require it. Signed-off-by: Alexander Couzens Acked-by: Alban Bedel Acked-by: Thomas Gleixner Cc: linux-mips@linux-mips.org Cc: Rob Herring Cc: Pawel Moll Cc: Mark Rutland Cc: Ian Campbell Cc: Kumar Gala Cc: devicetree@vger.kernel.org Cc: Jason Cooper Cc: Marc Zyngier Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11163/ Signed-off-by: Ralf Baechle --- arch/mips/ath79/irq.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/ath79/irq.c b/arch/mips/ath79/irq.c index 15ecb4831e12..bf1651cc7e64 100644 --- a/arch/mips/ath79/irq.c +++ b/arch/mips/ath79/irq.c @@ -293,8 +293,16 @@ static int __init ath79_misc_intc_of_init( return 0; } -IRQCHIP_DECLARE(ath79_misc_intc, "qca,ar7100-misc-intc", - ath79_misc_intc_of_init); + +static int __init ar7100_misc_intc_of_init( + struct device_node *node, struct device_node *parent) +{ + ath79_misc_irq_chip.irq_mask_ack = ar71xx_misc_irq_mask; + return ath79_misc_intc_of_init(node, parent); +} + +IRQCHIP_DECLARE(ar7100_misc_intc, "qca,ar7100-misc-intc", + ar7100_misc_intc_of_init); static int __init ar79_cpu_intc_of_init( struct device_node *node, struct device_node *parent) -- cgit v1.2.3 From 19446da415e0f01d56364b700fe984cda78bca50 Mon Sep 17 00:00:00 2001 From: Alexander Couzens Date: Sat, 19 Sep 2015 06:26:20 +0200 Subject: MIPS: ATH79: Add irq chip ar7240-misc-intc The ar7240 misc irq chip use ack handler instead of ack_mask handler. All new ath79 chips use the ar7240 misc irq chip Signed-off-by: Alexander Couzens Acked-by: Alban Bedel Acked-by: Thomas Gleixner Cc: linux-mips@linux-mips.org Cc: Rob Herring Cc: Pawel Moll Cc: Mark Rutland Cc: Ian Campbell Cc: Kumar Gala Cc: devicetree@vger.kernel.org Cc: Jason Cooper Cc: Marc Zyngier Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11164/ Signed-off-by: Ralf Baechle --- .../interrupt-controller/qca,ath79-misc-intc.txt | 20 ++++++++++++++++++-- arch/mips/ath79/irq.c | 10 ++++++++++ 2 files changed, 28 insertions(+), 2 deletions(-) (limited to 'arch/mips') diff --git a/Documentation/devicetree/bindings/interrupt-controller/qca,ath79-misc-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/qca,ath79-misc-intc.txt index 391717a68f3b..ec96b1f01478 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/qca,ath79-misc-intc.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/qca,ath79-misc-intc.txt @@ -4,8 +4,8 @@ The MISC interrupt controller is a secondary controller for lower priority interrupt. Required Properties: -- compatible: has to be "qca,-cpu-intc", "qca,ar7100-misc-intc" - as fallback +- compatible: has to be "qca,-cpu-intc", "qca,ar7100-misc-intc" or + "qca,-cpu-intc", "qca,ar7240-misc-intc" - reg: Base address and size of the controllers memory area - interrupt-parent: phandle of the parent interrupt controller. - interrupts: Interrupt specifier for the controllers interrupt. @@ -13,6 +13,9 @@ Required Properties: - #interrupt-cells : Specifies the number of cells needed to encode interrupt source, should be 1 +Compatible fallback depends on the SoC. Use ar7100 for ar71xx and ar913x, +use ar7240 for all other SoCs. + Please refer to interrupts.txt in this directory for details of the common Interrupt Controllers bindings used by client devices. @@ -28,3 +31,16 @@ Example: interrupt-controller; #interrupt-cells = <1>; }; + +Another example: + + interrupt-controller@18060010 { + compatible = "qca,ar9331-misc-intc", qca,ar7240-misc-intc"; + reg = <0x18060010 0x4>; + + interrupt-parent = <&cpuintc>; + interrupts = <6>; + + interrupt-controller; + #interrupt-cells = <1>; + }; diff --git a/arch/mips/ath79/irq.c b/arch/mips/ath79/irq.c index bf1651cc7e64..eeb3953ed8ac 100644 --- a/arch/mips/ath79/irq.c +++ b/arch/mips/ath79/irq.c @@ -304,6 +304,16 @@ static int __init ar7100_misc_intc_of_init( IRQCHIP_DECLARE(ar7100_misc_intc, "qca,ar7100-misc-intc", ar7100_misc_intc_of_init); +static int __init ar7240_misc_intc_of_init( + struct device_node *node, struct device_node *parent) +{ + ath79_misc_irq_chip.irq_ack = ar724x_misc_irq_ack; + return ath79_misc_intc_of_init(node, parent); +} + +IRQCHIP_DECLARE(ar7240_misc_intc, "qca,ar7240-misc-intc", + ar7240_misc_intc_of_init); + static int __init ar79_cpu_intc_of_init( struct device_node *node, struct device_node *parent) { -- cgit v1.2.3 From 2f6f31363cb7890784458d7805140687b4de5b59 Mon Sep 17 00:00:00 2001 From: James Hogan Date: Thu, 17 Sep 2015 17:49:20 +0100 Subject: MIPS: cpu-features: Add cpu_has_ftlb Add cpu_has_ftlb, which specifies that an FTLB is present in addition to the VTLB, probed based on whether Config.MT == 4 (rather than 1 for standard JTLB). This is necessary since MIPS release 6 removes Config4.MMUExtDef, so the presence of the FTLB fields in Config4 must be determined from Config.MT instead. Signed-off-by: James Hogan Cc: Markos Chandras Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11159/ Signed-off-by: Ralf Baechle --- arch/mips/include/asm/cpu-features.h | 3 +++ arch/mips/include/asm/cpu.h | 1 + arch/mips/include/asm/mipsregs.h | 2 ++ arch/mips/kernel/cpu-probe.c | 8 +++++--- 4 files changed, 11 insertions(+), 3 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/include/asm/cpu-features.h b/arch/mips/include/asm/cpu-features.h index 9801ac982655..fe67f12ac239 100644 --- a/arch/mips/include/asm/cpu-features.h +++ b/arch/mips/include/asm/cpu-features.h @@ -20,6 +20,9 @@ #ifndef cpu_has_tlb #define cpu_has_tlb (cpu_data[0].options & MIPS_CPU_TLB) #endif +#ifndef cpu_has_ftlb +#define cpu_has_ftlb (cpu_data[0].options & MIPS_CPU_FTLB) +#endif #ifndef cpu_has_tlbinv #define cpu_has_tlbinv (cpu_data[0].options & MIPS_CPU_TLBINV) #endif diff --git a/arch/mips/include/asm/cpu.h b/arch/mips/include/asm/cpu.h index cd89e9855775..82ad15f11049 100644 --- a/arch/mips/include/asm/cpu.h +++ b/arch/mips/include/asm/cpu.h @@ -385,6 +385,7 @@ enum cpu_type_enum { #define MIPS_CPU_CDMM 0x4000000000ull /* CPU has Common Device Memory Map */ #define MIPS_CPU_BP_GHIST 0x8000000000ull /* R12K+ Branch Prediction Global History */ #define MIPS_CPU_SP 0x10000000000ull /* Small (1KB) page support */ +#define MIPS_CPU_FTLB 0x20000000000ull /* CPU has Fixed-page-size TLB */ /* * CPU ASE encodings diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h index d3cd8eac81e3..c64781cf649f 100644 --- a/arch/mips/include/asm/mipsregs.h +++ b/arch/mips/include/asm/mipsregs.h @@ -487,6 +487,8 @@ /* Bits specific to the MIPS32/64 PRA. */ #define MIPS_CONF_MT (_ULCAST_(7) << 7) +#define MIPS_CONF_MT_TLB (_ULCAST_(1) << 7) +#define MIPS_CONF_MT_FTLB (_ULCAST_(4) << 7) #define MIPS_CONF_AR (_ULCAST_(7) << 10) #define MIPS_CONF_AT (_ULCAST_(3) << 13) #define MIPS_CONF_M (_ULCAST_(1) << 31) diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c index 571a8e6ea5bd..397551cf2e7b 100644 --- a/arch/mips/kernel/cpu-probe.c +++ b/arch/mips/kernel/cpu-probe.c @@ -410,16 +410,18 @@ static int set_ftlb_enable(struct cpuinfo_mips *c, int enable) static inline unsigned int decode_config0(struct cpuinfo_mips *c) { unsigned int config0; - int isa; + int isa, mt; config0 = read_c0_config(); /* * Look for Standard TLB or Dual VTLB and FTLB */ - if ((((config0 & MIPS_CONF_MT) >> 7) == 1) || - (((config0 & MIPS_CONF_MT) >> 7) == 4)) + mt = config0 & MIPS_CONF_MT; + if (mt == MIPS_CONF_MT_TLB) c->options |= MIPS_CPU_TLB; + else if (mt == MIPS_CONF_MT_FTLB) + c->options |= MIPS_CPU_TLB | MIPS_CPU_FTLB; isa = (config0 & MIPS_CONF_AT) >> 13; switch (isa) { -- cgit v1.2.3 From 43d104db596977a8fddc1e71245859a7fe85a658 Mon Sep 17 00:00:00 2001 From: James Hogan Date: Thu, 17 Sep 2015 17:49:21 +0100 Subject: MIPS: Fix FTLB detection for R6 R6 removed the Config4.MMUExtDef field, with the low 16 bits only allowed to contain FTLB fields, and commit e87569cd6c57 ("MIPS: cpu-probe: Fix VTLB/FTLB configuration for R6") updated the probing of this field to assume an FTLB is always present for R6. However the FTLB may still be absent. The presence of those fields is actually specified by the MMU type in the Config.MT field, so use that (the new cpu_has_ftlb) to determine whether the FTLB is actually present. Fixes: e87569cd6c57 ("MIPS: cpu-probe: Fix VTLB/FTLB configuration for R6") Signed-off-by: James Hogan Cc: Ralf Baechle Cc: Markos Chandras Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11160/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/cpu-probe.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c index 397551cf2e7b..09a51d091941 100644 --- a/arch/mips/kernel/cpu-probe.c +++ b/arch/mips/kernel/cpu-probe.c @@ -561,15 +561,18 @@ static inline unsigned int decode_config4(struct cpuinfo_mips *c) if (cpu_has_tlb) { if (((config4 & MIPS_CONF4_IE) >> 29) == 2) c->options |= MIPS_CPU_TLBINV; + /* - * This is a bit ugly. R6 has dropped that field from - * config4 and the only valid configuration is VTLB+FTLB so - * set a good value for mmuextdef for that case. + * R6 has dropped the MMUExtDef field from config4. + * On R6 the fields always describe the FTLB, and only if it is + * present according to Config.MT. */ - if (cpu_has_mips_r6) + if (!cpu_has_mips_r6) + mmuextdef = config4 & MIPS_CONF4_MMUEXTDEF; + else if (cpu_has_ftlb) mmuextdef = MIPS_CONF4_MMUEXTDEF_VTLBSIZEEXT; else - mmuextdef = config4 & MIPS_CONF4_MMUEXTDEF; + mmuextdef = 0; switch (mmuextdef) { case MIPS_CONF4_MMUEXTDEF_MMUSIZEEXT: -- cgit v1.2.3 From 920552b213e3dc832a874b4e7ba29ecddbab31bc Mon Sep 17 00:00:00 2001 From: David Hildenbrand Date: Fri, 18 Sep 2015 12:34:53 +0200 Subject: KVM: disable halt_poll_ns as default for s390x We observed some performance degradation on s390x with dynamic halt polling. Until we can provide a proper fix, let's enable halt_poll_ns as default only for supported architectures. Architectures are now free to set their own halt_poll_ns default value. Signed-off-by: David Hildenbrand Signed-off-by: Paolo Bonzini --- arch/arm/include/asm/kvm_host.h | 1 + arch/arm64/include/asm/kvm_host.h | 1 + arch/mips/include/asm/kvm_host.h | 1 + arch/powerpc/include/asm/kvm_host.h | 1 + arch/s390/include/asm/kvm_host.h | 1 + arch/x86/include/asm/kvm_host.h | 1 + virt/kvm/kvm_main.c | 4 ++-- 7 files changed, 8 insertions(+), 2 deletions(-) (limited to 'arch/mips') diff --git a/arch/arm/include/asm/kvm_host.h b/arch/arm/include/asm/kvm_host.h index 3df1e975f72a..c4072d9f32c7 100644 --- a/arch/arm/include/asm/kvm_host.h +++ b/arch/arm/include/asm/kvm_host.h @@ -33,6 +33,7 @@ #define KVM_PRIVATE_MEM_SLOTS 4 #define KVM_COALESCED_MMIO_PAGE_OFFSET 1 #define KVM_HAVE_ONE_REG +#define KVM_HALT_POLL_NS_DEFAULT 500000 #define KVM_VCPU_MAX_FEATURES 2 diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h index 4562459456a6..ed039688c221 100644 --- a/arch/arm64/include/asm/kvm_host.h +++ b/arch/arm64/include/asm/kvm_host.h @@ -33,6 +33,7 @@ #define KVM_USER_MEM_SLOTS 32 #define KVM_PRIVATE_MEM_SLOTS 4 #define KVM_COALESCED_MMIO_PAGE_OFFSET 1 +#define KVM_HALT_POLL_NS_DEFAULT 500000 #include #include diff --git a/arch/mips/include/asm/kvm_host.h b/arch/mips/include/asm/kvm_host.h index 3a54dbca9f7e..5a1a882e0a75 100644 --- a/arch/mips/include/asm/kvm_host.h +++ b/arch/mips/include/asm/kvm_host.h @@ -61,6 +61,7 @@ #define KVM_PRIVATE_MEM_SLOTS 0 #define KVM_COALESCED_MMIO_PAGE_OFFSET 1 +#define KVM_HALT_POLL_NS_DEFAULT 500000 diff --git a/arch/powerpc/include/asm/kvm_host.h b/arch/powerpc/include/asm/kvm_host.h index 195886a583ba..827a38d7a9db 100644 --- a/arch/powerpc/include/asm/kvm_host.h +++ b/arch/powerpc/include/asm/kvm_host.h @@ -44,6 +44,7 @@ #ifdef CONFIG_KVM_MMIO #define KVM_COALESCED_MMIO_PAGE_OFFSET 1 #endif +#define KVM_HALT_POLL_NS_DEFAULT 500000 /* These values are internal and can be increased later */ #define KVM_NR_IRQCHIPS 1 diff --git a/arch/s390/include/asm/kvm_host.h b/arch/s390/include/asm/kvm_host.h index 6ce4a0b7e8da..8ced426091e1 100644 --- a/arch/s390/include/asm/kvm_host.h +++ b/arch/s390/include/asm/kvm_host.h @@ -35,6 +35,7 @@ */ #define KVM_NR_IRQCHIPS 1 #define KVM_IRQCHIP_NUM_PINS 4096 +#define KVM_HALT_POLL_NS_DEFAULT 0 #define SIGP_CTRL_C 0x80 #define SIGP_CTRL_SCN_MASK 0x3f diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h index 349f80a82b82..2beee0382088 100644 --- a/arch/x86/include/asm/kvm_host.h +++ b/arch/x86/include/asm/kvm_host.h @@ -40,6 +40,7 @@ #define KVM_PIO_PAGE_OFFSET 1 #define KVM_COALESCED_MMIO_PAGE_OFFSET 2 +#define KVM_HALT_POLL_NS_DEFAULT 500000 #define KVM_IRQCHIP_NUM_PINS KVM_IOAPIC_NUM_PINS diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c index 04146a2e1d81..8db1d9361993 100644 --- a/virt/kvm/kvm_main.c +++ b/virt/kvm/kvm_main.c @@ -66,8 +66,8 @@ MODULE_AUTHOR("Qumranet"); MODULE_LICENSE("GPL"); -/* halt polling only reduces halt latency by 5-7 us, 500us is enough */ -static unsigned int halt_poll_ns = 500000; +/* Architectures should define their poll value according to the halt latency */ +static unsigned int halt_poll_ns = KVM_HALT_POLL_NS_DEFAULT; module_param(halt_poll_ns, uint, S_IRUGO | S_IWUSR); /* Default doubles per-vcpu halt_poll_ns. */ -- cgit v1.2.3 From 7573b94e08aeb5b814e2f277210bdcdf21a83869 Mon Sep 17 00:00:00 2001 From: Paul Burton Date: Tue, 22 Sep 2015 11:29:09 -0700 Subject: MIPS: CM: Provide a function to map from CPU to VP ID. The VP ID of a given CPU may not match up with the CPU number used by Linux. For example, if the width of the VP part of the VP ID is wider than log2(number of VPs per core) and the system has multiple cores then this will be the case. Alternatively, if a pre-r6 system implements the MT ASE with multiple VPEs per core and Linux is built without support for the MT ASE then the numbers won't match up either. Provide a function to convert from CPU number to VP ID. Signed-off-by: Paul Burton Acked-by: Thomas Gleixner Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: James Hogan Cc: Markos Chandras Patchwork: https://patchwork.linux-mips.org/patch/11211/ Signed-off-by: Ralf Baechle --- arch/mips/include/asm/mips-cm.h | 39 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 39 insertions(+) (limited to 'arch/mips') diff --git a/arch/mips/include/asm/mips-cm.h b/arch/mips/include/asm/mips-cm.h index d75b75e78ebb..1f1927ab4269 100644 --- a/arch/mips/include/asm/mips-cm.h +++ b/arch/mips/include/asm/mips-cm.h @@ -194,6 +194,7 @@ BUILD_CM_RW(reg3_mask, MIPS_CM_GCB_OFS + 0xc8) BUILD_CM_R_(gic_status, MIPS_CM_GCB_OFS + 0xd0) BUILD_CM_R_(cpc_status, MIPS_CM_GCB_OFS + 0xf0) BUILD_CM_RW(l2_config, MIPS_CM_GCB_OFS + 0x130) +BUILD_CM_RW(sys_config2, MIPS_CM_GCB_OFS + 0x150) /* Core Local & Core Other register accessor functions */ BUILD_CM_Cx_RW(reset_release, 0x00) @@ -316,6 +317,10 @@ BUILD_CM_Cx_R_(tcid_8_priority, 0x80) #define CM_GCR_L2_CONFIG_ASSOC_SHF 0 #define CM_GCR_L2_CONFIG_ASSOC_MSK (_ULCAST_(0xff) << 0) +/* GCR_SYS_CONFIG2 register fields */ +#define CM_GCR_SYS_CONFIG2_MAXVPW_SHF 0 +#define CM_GCR_SYS_CONFIG2_MAXVPW_MSK (_ULCAST_(0xf) << 0) + /* GCR_Cx_COHERENCE register fields */ #define CM_GCR_Cx_COHERENCE_COHDOMAINEN_SHF 0 #define CM_GCR_Cx_COHERENCE_COHDOMAINEN_MSK (_ULCAST_(0xff) << 0) @@ -405,4 +410,38 @@ static inline int mips_cm_revision(void) return read_gcr_rev(); } +/** + * mips_cm_max_vp_width() - return the width in bits of VP indices + * + * Return: the width, in bits, of VP indices in fields that combine core & VP + * indices. + */ +static inline unsigned int mips_cm_max_vp_width(void) +{ + extern int smp_num_siblings; + + if (mips_cm_revision() >= CM_REV_CM3) + return read_gcr_sys_config2() & CM_GCR_SYS_CONFIG2_MAXVPW_MSK; + + return smp_num_siblings; +} + +/** + * mips_cm_vp_id() - calculate the hardware VP ID for a CPU + * @cpu: the CPU whose VP ID to calculate + * + * Hardware such as the GIC uses identifiers for VPs which may not match the + * CPU numbers used by Linux. This function calculates the hardware VP + * identifier corresponding to a given CPU. + * + * Return: the VP ID for the CPU. + */ +static inline unsigned int mips_cm_vp_id(unsigned int cpu) +{ + unsigned int core = cpu_data[cpu].core; + unsigned int vp = cpu_vpe_id(&cpu_data[cpu]); + + return (core * mips_cm_max_vp_width()) + vp; +} + #endif /* __MIPS_ASM_MIPS_CM_H__ */ -- cgit v1.2.3 From def3ab5d0a0fe53026c2495b054dcc46cf923dac Mon Sep 17 00:00:00 2001 From: Paul Burton Date: Fri, 25 Sep 2015 08:59:36 -0700 Subject: MIPS: mm: compile maar_init unconditionally maar_init was previously only compiled when CONFIG_NEED_MULTIPLE_NODES was not set, which has been fine since it is only called from the standard implementation of mem_init which has the same condition. In preparation for calling it from the SMP startup code on secondary CPUs, move maar_init outside of the #ifndef such that it is always compiled. Signed-off-by: Paul Burton Cc: Markos Chandras Cc: linux-mips@linux-mips.org Cc: Steven J. Hill Cc: David Hildenbrand Cc: linux-kernel@vger.kernel.org Cc: Ingo Molnar Patchwork: https://patchwork.linux-mips.org/patch/11237/ Signed-off-by: Ralf Baechle --- arch/mips/mm/init.c | 126 ++++++++++++++++++++++++++-------------------------- 1 file changed, 63 insertions(+), 63 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c index 66d0f49c5bec..074ac5459026 100644 --- a/arch/mips/mm/init.c +++ b/arch/mips/mm/init.c @@ -252,6 +252,69 @@ void __init fixrange_init(unsigned long start, unsigned long end, #endif } +unsigned __weak platform_maar_init(unsigned num_pairs) +{ + struct maar_config cfg[BOOT_MEM_MAP_MAX]; + unsigned i, num_configured, num_cfg = 0; + phys_addr_t skip; + + for (i = 0; i < boot_mem_map.nr_map; i++) { + switch (boot_mem_map.map[i].type) { + case BOOT_MEM_RAM: + case BOOT_MEM_INIT_RAM: + break; + default: + continue; + } + + skip = 0x10000 - (boot_mem_map.map[i].addr & 0xffff); + + cfg[num_cfg].lower = boot_mem_map.map[i].addr; + cfg[num_cfg].lower += skip; + + cfg[num_cfg].upper = cfg[num_cfg].lower; + cfg[num_cfg].upper += boot_mem_map.map[i].size - 1; + cfg[num_cfg].upper -= skip; + + cfg[num_cfg].attrs = MIPS_MAAR_S; + num_cfg++; + } + + num_configured = maar_config(cfg, num_cfg, num_pairs); + if (num_configured < num_cfg) + pr_warn("Not enough MAAR pairs (%u) for all bootmem regions (%u)\n", + num_pairs, num_cfg); + + return num_configured; +} + +static void maar_init(void) +{ + unsigned num_maars, used, i; + + if (!cpu_has_maar) + return; + + /* Detect the number of MAARs */ + write_c0_maari(~0); + back_to_back_c0_hazard(); + num_maars = read_c0_maari() + 1; + + /* MAARs should be in pairs */ + WARN_ON(num_maars % 2); + + /* Configure the required MAARs */ + used = platform_maar_init(num_maars / 2); + + /* Disable any further MAARs */ + for (i = (used * 2); i < num_maars; i++) { + write_c0_maari(i); + back_to_back_c0_hazard(); + write_c0_maar(0); + back_to_back_c0_hazard(); + } +} + #ifndef CONFIG_NEED_MULTIPLE_NODES int page_is_ram(unsigned long pagenr) { @@ -334,69 +397,6 @@ static inline void mem_init_free_highmem(void) #endif } -unsigned __weak platform_maar_init(unsigned num_pairs) -{ - struct maar_config cfg[BOOT_MEM_MAP_MAX]; - unsigned i, num_configured, num_cfg = 0; - phys_addr_t skip; - - for (i = 0; i < boot_mem_map.nr_map; i++) { - switch (boot_mem_map.map[i].type) { - case BOOT_MEM_RAM: - case BOOT_MEM_INIT_RAM: - break; - default: - continue; - } - - skip = 0x10000 - (boot_mem_map.map[i].addr & 0xffff); - - cfg[num_cfg].lower = boot_mem_map.map[i].addr; - cfg[num_cfg].lower += skip; - - cfg[num_cfg].upper = cfg[num_cfg].lower; - cfg[num_cfg].upper += boot_mem_map.map[i].size - 1; - cfg[num_cfg].upper -= skip; - - cfg[num_cfg].attrs = MIPS_MAAR_S; - num_cfg++; - } - - num_configured = maar_config(cfg, num_cfg, num_pairs); - if (num_configured < num_cfg) - pr_warn("Not enough MAAR pairs (%u) for all bootmem regions (%u)\n", - num_pairs, num_cfg); - - return num_configured; -} - -static void maar_init(void) -{ - unsigned num_maars, used, i; - - if (!cpu_has_maar) - return; - - /* Detect the number of MAARs */ - write_c0_maari(~0); - back_to_back_c0_hazard(); - num_maars = read_c0_maari() + 1; - - /* MAARs should be in pairs */ - WARN_ON(num_maars % 2); - - /* Configure the required MAARs */ - used = platform_maar_init(num_maars / 2); - - /* Disable any further MAARs */ - for (i = (used * 2); i < num_maars; i++) { - write_c0_maari(i); - back_to_back_c0_hazard(); - write_c0_maar(0); - back_to_back_c0_hazard(); - } -} - void __init mem_init(void) { #ifdef CONFIG_HIGHMEM -- cgit v1.2.3 From 651ca7f4dab77f07fdac9cfb68bcab6bd2b7f827 Mon Sep 17 00:00:00 2001 From: Paul Burton Date: Fri, 25 Sep 2015 08:59:37 -0700 Subject: MIPS: print MAAR configuration during boot Verifying that the MAAR configuration is as expected is useful when debugging the performance of a system. Print out the memory regions configured via MAAR along with their attributes. Signed-off-by: Paul Burton Cc: linux-mips@linux-mips.org Cc: Steven J. Hill Cc: David Hildenbrand Cc: linux-kernel@vger.kernel.org Cc: Peter Zijlstra (Intel) Patchwork: https://patchwork.linux-mips.org/patch/11238/ Signed-off-by: Ralf Baechle --- arch/mips/mm/init.c | 29 +++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+) (limited to 'arch/mips') diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c index 074ac5459026..023c164b9eb6 100644 --- a/arch/mips/mm/init.c +++ b/arch/mips/mm/init.c @@ -291,6 +291,7 @@ unsigned __weak platform_maar_init(unsigned num_pairs) static void maar_init(void) { unsigned num_maars, used, i; + phys_addr_t lower, upper, attr; if (!cpu_has_maar) return; @@ -313,6 +314,34 @@ static void maar_init(void) write_c0_maar(0); back_to_back_c0_hazard(); } + + pr_info("MAAR configuration:\n"); + for (i = 0; i < num_maars; i += 2) { + write_c0_maari(i); + back_to_back_c0_hazard(); + upper = read_c0_maar(); + + write_c0_maari(i + 1); + back_to_back_c0_hazard(); + lower = read_c0_maar(); + + attr = lower & upper; + lower = (lower & MIPS_MAAR_ADDR) << 4; + upper = ((upper & MIPS_MAAR_ADDR) << 4) | 0xffff; + + pr_info(" [%d]: ", i / 2); + if (!(attr & MIPS_MAAR_V)) { + pr_cont("disabled\n"); + continue; + } + + pr_cont("%pa-%pa", &lower, &upper); + + if (attr & MIPS_MAAR_S) + pr_cont(" speculate"); + + pr_cont("\n"); + } } #ifndef CONFIG_NEED_MULTIPLE_NODES -- cgit v1.2.3 From e060f6ed281669b6d2f22d8dafd664b532386918 Mon Sep 17 00:00:00 2001 From: Paul Burton Date: Fri, 25 Sep 2015 08:59:38 -0700 Subject: MIPS: Initialise MAARs on secondary CPUs MAARs should be initialised on each CPU (or rather, core) in the system in order to achieve consistent behaviour & performance. Previously they have only been initialised on the boot CPU which leads to performance problems if tasks are later scheduled on a secondary CPU, particularly if those tasks make use of unaligned vector accesses where some CPUs don't handle any cases in hardware for non-speculative memory regions. Fix this by recording the MAAR configuration from the boot CPU and applying it to secondary CPUs as part of their bringup. Reported-by: Doug Gilmore Signed-off-by: Paul Burton Cc: linux-mips@linux-mips.org Cc: Rusty Russell Cc: Steven J. Hill Cc: Andrew Bresticker Cc: Bjorn Helgaas Cc: David Hildenbrand Cc: linux-kernel@vger.kernel.org Cc: Aaro Koskinen Cc: James Hogan Cc: Ingo Molnar Cc: Markos Chandras Cc: Hemmo Nieminen Cc: Alex Smith Cc: Peter Zijlstra (Intel) Patchwork: https://patchwork.linux-mips.org/patch/11239/ Signed-off-by: Ralf Baechle --- arch/mips/include/asm/maar.h | 9 +++++++++ arch/mips/kernel/smp.c | 2 ++ arch/mips/mm/init.c | 28 +++++++++++++++++++++++++--- 3 files changed, 36 insertions(+), 3 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/include/asm/maar.h b/arch/mips/include/asm/maar.h index b02891f9caaf..21d9607c80d7 100644 --- a/arch/mips/include/asm/maar.h +++ b/arch/mips/include/asm/maar.h @@ -65,6 +65,15 @@ static inline void write_maar_pair(unsigned idx, phys_addr_t lower, back_to_back_c0_hazard(); } +/** + * maar_init() - initialise MAARs + * + * Performs initialisation of MAARs for the current CPU, making use of the + * platforms implementation of platform_maar_init where necessary and + * duplicating the setup it provides on secondary CPUs. + */ +extern void maar_init(void); + /** * struct maar_config - MAAR configuration data * @lower: The lowest address that the MAAR pair will affect. Must be diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c index a31896c33716..bd4385a8e6e8 100644 --- a/arch/mips/kernel/smp.c +++ b/arch/mips/kernel/smp.c @@ -42,6 +42,7 @@ #include #include #include +#include cpumask_t cpu_callin_map; /* Bitmask of started secondaries */ @@ -157,6 +158,7 @@ asmlinkage void start_secondary(void) mips_clockevent_init(); mp_ops->init_secondary(); cpu_report(); + maar_init(); /* * XXX parity protection should be folded in here when it's converted diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c index 023c164b9eb6..8770e619185e 100644 --- a/arch/mips/mm/init.c +++ b/arch/mips/mm/init.c @@ -44,6 +44,7 @@ #include #include #include +#include /* * We have up to 8 empty zeroed pages so we can map one of the right colour @@ -288,10 +289,14 @@ unsigned __weak platform_maar_init(unsigned num_pairs) return num_configured; } -static void maar_init(void) +void maar_init(void) { unsigned num_maars, used, i; phys_addr_t lower, upper, attr; + static struct { + struct maar_config cfgs[3]; + unsigned used; + } recorded = { { { 0 } }, 0 }; if (!cpu_has_maar) return; @@ -304,8 +309,14 @@ static void maar_init(void) /* MAARs should be in pairs */ WARN_ON(num_maars % 2); - /* Configure the required MAARs */ - used = platform_maar_init(num_maars / 2); + /* Set MAARs using values we recorded already */ + if (recorded.used) { + used = maar_config(recorded.cfgs, recorded.used, num_maars / 2); + BUG_ON(used != recorded.used); + } else { + /* Configure the required MAARs */ + used = platform_maar_init(num_maars / 2); + } /* Disable any further MAARs */ for (i = (used * 2); i < num_maars; i++) { @@ -315,6 +326,9 @@ static void maar_init(void) back_to_back_c0_hazard(); } + if (recorded.used) + return; + pr_info("MAAR configuration:\n"); for (i = 0; i < num_maars; i += 2) { write_c0_maari(i); @@ -341,6 +355,14 @@ static void maar_init(void) pr_cont(" speculate"); pr_cont("\n"); + + /* Record the setup for use on secondary CPUs */ + if (used <= ARRAY_SIZE(recorded.cfgs)) { + recorded.cfgs[recorded.used].lower = lower; + recorded.cfgs[recorded.used].upper = upper; + recorded.cfgs[recorded.used].attrs = attr; + recorded.used++; + } } } -- cgit v1.2.3 From 96fc7a9cee671f10e14aaca44833696a71f1ebdb Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 30 Sep 2015 14:24:31 +0200 Subject: MIPS: Wire up userfaultfd and membarrier syscalls. Signed-off-by: Ralf Baechle --- arch/mips/include/uapi/asm/unistd.h | 18 ++++++++++++------ arch/mips/kernel/scall32-o32.S | 2 ++ arch/mips/kernel/scall64-64.S | 2 ++ arch/mips/kernel/scall64-n32.S | 2 ++ arch/mips/kernel/scall64-o32.S | 2 ++ 5 files changed, 20 insertions(+), 6 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/include/uapi/asm/unistd.h b/arch/mips/include/uapi/asm/unistd.h index c03088f9f514..cfabadb135d9 100644 --- a/arch/mips/include/uapi/asm/unistd.h +++ b/arch/mips/include/uapi/asm/unistd.h @@ -377,16 +377,18 @@ #define __NR_memfd_create (__NR_Linux + 354) #define __NR_bpf (__NR_Linux + 355) #define __NR_execveat (__NR_Linux + 356) +#define __NR_userfaultfd (__NR_Linux + 357) +#define __NR_membarrier (__NR_Linux + 358) /* * Offset of the last Linux o32 flavoured syscall */ -#define __NR_Linux_syscalls 356 +#define __NR_Linux_syscalls 358 #endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */ #define __NR_O32_Linux 4000 -#define __NR_O32_Linux_syscalls 356 +#define __NR_O32_Linux_syscalls 358 #if _MIPS_SIM == _MIPS_SIM_ABI64 @@ -711,16 +713,18 @@ #define __NR_memfd_create (__NR_Linux + 314) #define __NR_bpf (__NR_Linux + 315) #define __NR_execveat (__NR_Linux + 316) +#define __NR_userfaultfd (__NR_Linux + 317) +#define __NR_membarrier (__NR_Linux + 318) /* * Offset of the last Linux 64-bit flavoured syscall */ -#define __NR_Linux_syscalls 316 +#define __NR_Linux_syscalls 318 #endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */ #define __NR_64_Linux 5000 -#define __NR_64_Linux_syscalls 316 +#define __NR_64_Linux_syscalls 318 #if _MIPS_SIM == _MIPS_SIM_NABI32 @@ -1049,15 +1053,17 @@ #define __NR_memfd_create (__NR_Linux + 318) #define __NR_bpf (__NR_Linux + 319) #define __NR_execveat (__NR_Linux + 320) +#define __NR_userfaultfd (__NR_Linux + 321) +#define __NR_membarrier (__NR_Linux + 322) /* * Offset of the last N32 flavoured syscall */ -#define __NR_Linux_syscalls 320 +#define __NR_Linux_syscalls 322 #endif /* _MIPS_SIM == _MIPS_SIM_NABI32 */ #define __NR_N32_Linux 6000 -#define __NR_N32_Linux_syscalls 320 +#define __NR_N32_Linux_syscalls 322 #endif /* _UAPI_ASM_UNISTD_H */ diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S index 4cc13508d967..d06e30c1e4cd 100644 --- a/arch/mips/kernel/scall32-o32.S +++ b/arch/mips/kernel/scall32-o32.S @@ -599,3 +599,5 @@ EXPORT(sys_call_table) PTR sys_memfd_create PTR sys_bpf /* 4355 */ PTR sys_execveat + PTR sys_userfaultfd + PTR sys_membarrier diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S index a6f6b762c47a..428c2cd2326c 100644 --- a/arch/mips/kernel/scall64-64.S +++ b/arch/mips/kernel/scall64-64.S @@ -436,4 +436,6 @@ EXPORT(sys_call_table) PTR sys_memfd_create PTR sys_bpf /* 5315 */ PTR sys_execveat + PTR sys_userfaultfd + PTR sys_membarrier .size sys_call_table,.-sys_call_table diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S index 4b2010654c46..3868cf4c83df 100644 --- a/arch/mips/kernel/scall64-n32.S +++ b/arch/mips/kernel/scall64-n32.S @@ -429,4 +429,6 @@ EXPORT(sysn32_call_table) PTR sys_memfd_create PTR sys_bpf PTR compat_sys_execveat /* 6320 */ + PTR sys_userfaultfd + PTR sys_membarrier .size sysn32_call_table,.-sysn32_call_table diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S index f543ff4feef9..6622980d82ea 100644 --- a/arch/mips/kernel/scall64-o32.S +++ b/arch/mips/kernel/scall64-o32.S @@ -584,4 +584,6 @@ EXPORT(sys32_call_table) PTR sys_memfd_create PTR sys_bpf /* 4355 */ PTR compat_sys_execveat + PTR sys_userfaultfd + PTR sys_membarrier .size sys32_call_table,.-sys32_call_table -- cgit v1.2.3 From 53960059d56ecef67d4ddd546731623641a3d2d1 Mon Sep 17 00:00:00 2001 From: James Hogan Date: Fri, 27 Mar 2015 08:33:43 +0000 Subject: MIPS: dma-default: Fix 32-bit fall back to GFP_DMA If there is a DMA zone (usually 24bit = 16MB I believe), but no DMA32 zone, as is the case for some 32-bit kernels, then massage_gfp_flags() will cause DMA memory allocated for devices with a 32..63-bit coherent_dma_mask to fall back to using __GFP_DMA, even though there may only be 32-bits of physical address available anyway. Correct that case to compare against a mask the size of phys_addr_t instead of always using a 64-bit mask. Signed-off-by: James Hogan Fixes: a2e715a86c6d ("MIPS: DMA: Fix computation of DMA flags from device's coherent_dma_mask.") Cc: Ralf Baechle Cc: linux-mips@linux-mips.org Cc: # 2.6.36+ Patchwork: https://patchwork.linux-mips.org/patch/9610/ Signed-off-by: Ralf Baechle --- arch/mips/mm/dma-default.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/mips') diff --git a/arch/mips/mm/dma-default.c b/arch/mips/mm/dma-default.c index a914dc1cb6d1..d8117be729a2 100644 --- a/arch/mips/mm/dma-default.c +++ b/arch/mips/mm/dma-default.c @@ -100,7 +100,7 @@ static gfp_t massage_gfp_flags(const struct device *dev, gfp_t gfp) else #endif #if defined(CONFIG_ZONE_DMA) && !defined(CONFIG_ZONE_DMA32) - if (dev->coherent_dma_mask < DMA_BIT_MASK(64)) + if (dev->coherent_dma_mask < DMA_BIT_MASK(sizeof(phys_addr_t) * 8)) dma_flag = __GFP_DMA; else #endif -- cgit v1.2.3 From 1e5fb282f8eda889776ee83f9214d5df9edaa26d Mon Sep 17 00:00:00 2001 From: Paul Burton Date: Wed, 5 Aug 2015 15:42:36 -0700 Subject: MIPS: CPS: Stop dangling delay slot from has_mt. The has_mt macro ended with a branch, leaving its callers with a delay slot that would be executed if Config3.MT is not set. However it would not be executed if Config3 (or earlier Config registers) don't exist which makes it somewhat inconsistent at best. Fill the delay slot in the macro & fix the mips_cps_boot_vpes caller appropriately. Signed-off-by: Paul Burton Cc: Markos Chandras Cc: James Hogan Cc: # 3.16+ Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10865/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/cps-vec.S | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/kernel/cps-vec.S b/arch/mips/kernel/cps-vec.S index 9f71c06aebf6..fa159aab252c 100644 --- a/arch/mips/kernel/cps-vec.S +++ b/arch/mips/kernel/cps-vec.S @@ -39,6 +39,7 @@ mfc0 \dest, CP0_CONFIG, 3 andi \dest, \dest, MIPS_CONF3_MT beqz \dest, \nomt + nop .endm .section .text.cps-vec @@ -226,7 +227,6 @@ LEAF(mips_cps_core_init) #ifdef CONFIG_MIPS_MT /* Check that the core implements the MT ASE */ has_mt t0, 3f - nop .set push .set mips64r2 @@ -310,8 +310,8 @@ LEAF(mips_cps_boot_vpes) PTR_ADDU t0, t0, t1 /* Calculate this VPEs ID. If the core doesn't support MT use 0 */ + li t9, 0 has_mt ta2, 1f - li t9, 0 /* Find the number of VPEs present in the core */ mfc0 t1, CP0_MVPCONF0 -- cgit v1.2.3 From a5b0f6db0e6cf6224e50f6585e9c8f0c2d38a8f8 Mon Sep 17 00:00:00 2001 From: Paul Burton Date: Wed, 5 Aug 2015 15:42:37 -0700 Subject: MIPS: CPS: Don't include MT code in non-MT kernels. The MT-specific code in mips_cps_boot_vpes can safely be omitted from kernels which don't support MT, with the default VPE==0 case being used as it would be after the has_mt (Config3.MT) check failed at runtime. Discarding the code entirely will save us a few bytes & allow cleaner handling of MT ASE instructions by later patches. Signed-off-by: Paul Burton Cc: Markos Chandras Cc: James Hogan Cc: # 3.16+ Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10866/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/cps-vec.S | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch/mips') diff --git a/arch/mips/kernel/cps-vec.S b/arch/mips/kernel/cps-vec.S index fa159aab252c..57642f56dffb 100644 --- a/arch/mips/kernel/cps-vec.S +++ b/arch/mips/kernel/cps-vec.S @@ -311,6 +311,7 @@ LEAF(mips_cps_boot_vpes) /* Calculate this VPEs ID. If the core doesn't support MT use 0 */ li t9, 0 +#ifdef CONFIG_MIPS_MT has_mt ta2, 1f /* Find the number of VPEs present in the core */ @@ -330,6 +331,7 @@ LEAF(mips_cps_boot_vpes) /* Retrieve the VPE ID from EBase.CPUNum */ mfc0 t9, $15, 1 and t9, t9, t1 +#endif 1: /* Calculate a pointer to this VPEs struct vpe_boot_config */ li t1, VPEBOOTCFG_SIZE -- cgit v1.2.3 From 7a63076d9a31a6c2073da45021eeb4f89d2a8b56 Mon Sep 17 00:00:00 2001 From: Paul Burton Date: Wed, 5 Aug 2015 15:42:38 -0700 Subject: MIPS: CPS: #ifdef on CONFIG_MIPS_MT_SMP rather than CONFIG_MIPS_MT The CONFIG_MIPS_MT symbol can be selected by CONFIG_MIPS_VPE_LOADER in addition to CONFIG_MIPS_MT_SMP. We only want MT code in the CPS SMP boot vector if we're using MT for SMP. Thus switch the config symbol we ifdef against to CONFIG_MIPS_MT_SMP. Signed-off-by: Paul Burton Cc: Markos Chandras Cc: James Hogan Cc: # 3.16+ Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/10867/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/cps-vec.S | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/kernel/cps-vec.S b/arch/mips/kernel/cps-vec.S index 57642f56dffb..209ded16806b 100644 --- a/arch/mips/kernel/cps-vec.S +++ b/arch/mips/kernel/cps-vec.S @@ -224,7 +224,7 @@ LEAF(excep_ejtag) END(excep_ejtag) LEAF(mips_cps_core_init) -#ifdef CONFIG_MIPS_MT +#ifdef CONFIG_MIPS_MT_SMP /* Check that the core implements the MT ASE */ has_mt t0, 3f @@ -311,7 +311,7 @@ LEAF(mips_cps_boot_vpes) /* Calculate this VPEs ID. If the core doesn't support MT use 0 */ li t9, 0 -#ifdef CONFIG_MIPS_MT +#ifdef CONFIG_MIPS_MT_SMP has_mt ta2, 1f /* Find the number of VPEs present in the core */ @@ -339,7 +339,7 @@ LEAF(mips_cps_boot_vpes) PTR_L ta3, COREBOOTCFG_VPECONFIG(t0) PTR_ADDU v0, v0, ta3 -#ifdef CONFIG_MIPS_MT +#ifdef CONFIG_MIPS_MT_SMP /* If the core doesn't support MT then return */ bnez ta2, 1f @@ -453,7 +453,7 @@ LEAF(mips_cps_boot_vpes) 2: .set pop -#endif /* CONFIG_MIPS_MT */ +#endif /* CONFIG_MIPS_MT_SMP */ /* Return */ jr ra -- cgit v1.2.3 From 5b235dc2647e4977b17b5c41d959d0f455831c3f Mon Sep 17 00:00:00 2001 From: Alban Bedel Date: Fri, 4 Sep 2015 14:29:16 +0200 Subject: MIPS: Fix the build on jz4740 after removing the custom gpio.h Somehow the wrong version of the patch to remove the use of custom gpio.h on mips has been merged. This patch add the missing fixes for a build error on jz4740 because linux/gpio.h doesn't provide any machine specfics definitions anymore. Signed-off-by: Alban Bedel Cc: Paul Burton Cc: Lars-Peter Clausen Cc: Brian Norris Cc: Thomas Gleixner Cc: Linus Walleij Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11089/ Signed-off-by: Ralf Baechle --- arch/mips/jz4740/board-qi_lb60.c | 1 + arch/mips/jz4740/gpio.c | 1 + 2 files changed, 2 insertions(+) (limited to 'arch/mips') diff --git a/arch/mips/jz4740/board-qi_lb60.c b/arch/mips/jz4740/board-qi_lb60.c index 4e62bf85d0b0..459cb017306c 100644 --- a/arch/mips/jz4740/board-qi_lb60.c +++ b/arch/mips/jz4740/board-qi_lb60.c @@ -26,6 +26,7 @@ #include #include +#include #include #include #include diff --git a/arch/mips/jz4740/gpio.c b/arch/mips/jz4740/gpio.c index a74e181058b0..8c6d76c9b2d6 100644 --- a/arch/mips/jz4740/gpio.c +++ b/arch/mips/jz4740/gpio.c @@ -28,6 +28,7 @@ #include #include +#include #define JZ4740_GPIO_BASE_A (32*0) #define JZ4740_GPIO_BASE_B (32*1) -- cgit v1.2.3 From 1e16a8f11669c98a0adf5fb5f8522aebc1f69f71 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Thu, 1 Oct 2015 15:45:44 +0200 Subject: MIPS: BPF: Do all exports of symbols with FEXPORT(). FEXPORT also marks the symbol as code using .type symbol, @function. Without objdump -d will output only a hexdump for code following the affected symbols. Signed-off-by: Ralf Baechle --- arch/mips/net/bpf_jit_asm.S | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/net/bpf_jit_asm.S b/arch/mips/net/bpf_jit_asm.S index dabf4179cd7e..eabb5e0889ee 100644 --- a/arch/mips/net/bpf_jit_asm.S +++ b/arch/mips/net/bpf_jit_asm.S @@ -57,8 +57,7 @@ LEAF(sk_load_word) is_offset_negative(word) - .globl sk_load_word_positive -sk_load_word_positive: +FEXPORT(sk_load_word_positive) is_offset_in_header(4, word) /* Offset within header boundaries */ PTR_ADDU t1, $r_skb_data, offset @@ -85,8 +84,7 @@ sk_load_word_positive: LEAF(sk_load_half) is_offset_negative(half) - .globl sk_load_half_positive -sk_load_half_positive: +FEXPORT(sk_load_half_positive) is_offset_in_header(2, half) /* Offset within header boundaries */ PTR_ADDU t1, $r_skb_data, offset @@ -109,8 +107,7 @@ sk_load_half_positive: LEAF(sk_load_byte) is_offset_negative(byte) - .globl sk_load_byte_positive -sk_load_byte_positive: +FEXPORT(sk_load_byte_positive) is_offset_in_header(1, byte) /* Offset within header boundaries */ PTR_ADDU t1, $r_skb_data, offset -- cgit v1.2.3 From 0c5d187828588dd1b36cb93b4481a8db467ef3e8 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Fri, 2 Oct 2015 09:48:57 +0200 Subject: MIPS: BPF: Fix load delay slots. The entire bpf_jit_asm.S is written in noreorder mode because "we know better" according to a comment. This also prevented the assembler from throwing in the required NOPs for MIPS I processors which have no load-use interlock, thus the load's consumer might end up using the old value of the register from prior to the load. Fixed by putting the assembler in reorder mode for just the affected load instructions. This is not enough for gas to actually try to be clever by looking at the next instruction and inserting a nop only when needed but as the comment said "we know better", so getting gas to unconditionally emit a NOP is just right in this case and prevents adding further ifdefery. Signed-off-by: Ralf Baechle --- arch/mips/net/bpf_jit_asm.S | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch/mips') diff --git a/arch/mips/net/bpf_jit_asm.S b/arch/mips/net/bpf_jit_asm.S index eabb5e0889ee..5d2e0c8d29c0 100644 --- a/arch/mips/net/bpf_jit_asm.S +++ b/arch/mips/net/bpf_jit_asm.S @@ -61,7 +61,9 @@ FEXPORT(sk_load_word_positive) is_offset_in_header(4, word) /* Offset within header boundaries */ PTR_ADDU t1, $r_skb_data, offset + .set reorder lw $r_A, 0(t1) + .set noreorder #ifdef CONFIG_CPU_LITTLE_ENDIAN # if defined(__mips_isa_rev) && (__mips_isa_rev >= 2) wsbh t0, $r_A @@ -88,7 +90,9 @@ FEXPORT(sk_load_half_positive) is_offset_in_header(2, half) /* Offset within header boundaries */ PTR_ADDU t1, $r_skb_data, offset + .set reorder lh $r_A, 0(t1) + .set noreorder #ifdef CONFIG_CPU_LITTLE_ENDIAN # if defined(__mips_isa_rev) && (__mips_isa_rev >= 2) wsbh t0, $r_A -- cgit v1.2.3 From 0fa24340f7c88d2814547d8d24d5e3a1803009cc Mon Sep 17 00:00:00 2001 From: Paul Burton Date: Mon, 21 Sep 2015 10:07:41 -0700 Subject: MIPS: Fix octeon FP context switch handling Commit 1a3d59579b9f ("MIPS: Tidy up FPU context switching") removed FP context saving from the asm-written resume function in favour of reusing existing code to perform the same task. However it only removed the FP context saving code from the r4k_switch.S implementation of resume. Octeon uses its own implementation in octeon_switch.S, so remove FP context saving there too in order to prevent attempting to save context twice. That formerly led to an exception from the second save as follows because the FPU had already been disabled by the first save: do_cpu invoked from kernel context![#1]: CPU: 0 PID: 2 Comm: kthreadd Not tainted 4.3.0-rc2-dirty #2 task: 800000041f84a008 ti: 800000041f864000 task.ti: 800000041f864000 $ 0 : 0000000000000000 0000000010008ce1 0000000000100000 ffffffffbfffffff $ 4 : 800000041f84a008 800000041f84ac08 800000041f84c000 0000000000000004 $ 8 : 0000000000000001 0000000000000000 0000000000000000 0000000000000001 $12 : 0000000010008ce3 0000000000119c60 0000000000000036 800000041f864000 $16 : 800000041f84ac08 800000000792ce80 800000041f84a008 ffffffff81758b00 $20 : 0000000000000000 ffffffff8175ae50 0000000000000000 ffffffff8176c740 $24 : 0000000000000006 ffffffff81170300 $28 : 800000041f864000 800000041f867d90 0000000000000000 ffffffff815f3fa0 Hi : 0000000000fa8257 Lo : ffffffffe15cfc00 epc : ffffffff8112821c resume+0x9c/0x200 ra : ffffffff815f3fa0 __schedule+0x3f0/0x7d8 Status: 10008ce2 KX SX UX KERNEL EXL Cause : 1080002c (ExcCode 0b) PrId : 000d0601 (Cavium Octeon+) Modules linked in: Process kthreadd (pid: 2, threadinfo=800000041f864000, task=800000041f84a008, tls=0000000000000000) Stack : ffffffff81604218 ffffffff815f7e08 800000041f84a008 ffffffff811681b0 800000041f84a008 ffffffff817e9878 0000000000000000 ffffffff81770000 ffffffff81768340 ffffffff81161398 0000000000000001 0000000000000000 0000000000000000 ffffffff815f4424 0000000000000000 ffffffff81161d68 ffffffff81161be8 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 ffffffff8111e16c 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 ... Call Trace: [] resume+0x9c/0x200 [] __schedule+0x3f0/0x7d8 [] schedule+0x34/0x98 [] kthreadd+0x180/0x198 [] ret_from_kernel_thread+0x14/0x1c Tested using cavium_octeon_defconfig on an EdgeRouter Lite. Fixes: 1a3d59579b9f ("MIPS: Tidy up FPU context switching") Reported-by: Aaro Koskinen Signed-off-by: Paul Burton Cc: linux-mips@linux-mips.org Cc: Aleksey Makarov Cc: linux-kernel@vger.kernel.org Cc: Chandrakala Chavva Cc: David Daney Cc: Leonid Rosenboim Patchwork: https://patchwork.linux-mips.org/patch/11166/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/octeon_switch.S | 26 +------------------------- 1 file changed, 1 insertion(+), 25 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/kernel/octeon_switch.S b/arch/mips/kernel/octeon_switch.S index 423ae83af1fb..3375745b9198 100644 --- a/arch/mips/kernel/octeon_switch.S +++ b/arch/mips/kernel/octeon_switch.S @@ -18,7 +18,7 @@ .set pop /* * task_struct *resume(task_struct *prev, task_struct *next, - * struct thread_info *next_ti, int usedfpu) + * struct thread_info *next_ti) */ .align 7 LEAF(resume) @@ -28,30 +28,6 @@ cpu_save_nonscratch a0 LONG_S ra, THREAD_REG31(a0) - /* - * check if we need to save FPU registers - */ - .set push - .set noreorder - beqz a3, 1f - PTR_L t3, TASK_THREAD_INFO(a0) - .set pop - - /* - * clear saved user stack CU1 bit - */ - LONG_L t0, ST_OFF(t3) - li t1, ~ST0_CU1 - and t0, t0, t1 - LONG_S t0, ST_OFF(t3) - - .set push - .set arch=mips64r2 - fpu_save_double a0 t0 t1 # c0_status passed in t0 - # clobbers t1 - .set pop -1: - #if CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE > 0 /* Check if we need to store CVMSEG state */ dmfc0 t0, $11,7 /* CvmMemCtl */ -- cgit v1.2.3 From 085c2f25d36ef4a69bb1dab933daee0692426f15 Mon Sep 17 00:00:00 2001 From: Paul Burton Date: Mon, 21 Sep 2015 10:07:42 -0700 Subject: MIPS: Fix R2300 FP context switch handling Commit 1a3d59579b9f ("MIPS: Tidy up FPU context switching") removed FP context saving from the asm-written resume function in favour of reusing existing code to perform the same task. However it only removed the FP context saving code from the r4k_switch.S implementation of resume. Remove it from the r2300_switch.S implementation too in order to prevent attempting to save the FP context twice, which would likely lead to an exception from the second save because the FPU had already been disabled by the first save. This patch has only been build tested, using rbtx49xx_defconfig. Fixes: 1a3d59579b9f ("MIPS: Tidy up FPU context switching") Signed-off-by: Paul Burton Cc: linux-mips@linux-mips.org Cc: Maciej W. Rozycki Cc: linux-kernel@vger.kernel.org Cc: Manuel Lauss Patchwork: https://patchwork.linux-mips.org/patch/11167/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/r2300_switch.S | 28 +--------------------------- 1 file changed, 1 insertion(+), 27 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/kernel/r2300_switch.S b/arch/mips/kernel/r2300_switch.S index 5087a4b72e6b..ac27ef7d4d0e 100644 --- a/arch/mips/kernel/r2300_switch.S +++ b/arch/mips/kernel/r2300_switch.S @@ -30,19 +30,9 @@ */ #define ST_OFF (_THREAD_SIZE - 32 - PT_SIZE + PT_STATUS) -/* - * FPU context is saved iff the process has used it's FPU in the current - * time slice as indicated by TIF_USEDFPU. In any case, the CU1 bit for user - * space STATUS register should be 0, so that a process *always* starts its - * userland with FPU disabled after each context switch. - * - * FPU will be enabled as soon as the process accesses FPU again, through - * do_cpu() trap. - */ - /* * task_struct *resume(task_struct *prev, task_struct *next, - * struct thread_info *next_ti, int usedfpu) + * struct thread_info *next_ti) */ LEAF(resume) mfc0 t1, CP0_STATUS @@ -50,22 +40,6 @@ LEAF(resume) cpu_save_nonscratch a0 sw ra, THREAD_REG31(a0) - beqz a3, 1f - - PTR_L t3, TASK_THREAD_INFO(a0) - - /* - * clear saved user stack CU1 bit - */ - lw t0, ST_OFF(t3) - li t1, ~ST0_CU1 - and t0, t0, t1 - sw t0, ST_OFF(t3) - - fpu_save_single a0, t0 # clobbers t0 - -1: - #if defined(CONFIG_CC_STACKPROTECTOR) && !defined(CONFIG_SMP) PTR_LA t8, __stack_chk_guard LONG_L t9, TASK_STACK_CANARY(a1) -- cgit v1.2.3 From 66803dd9198cb57a4b7ed4a6846a63ab1d59a2e0 Mon Sep 17 00:00:00 2001 From: Matt Bennett Date: Wed, 30 Sep 2015 17:40:42 +1300 Subject: MIPS: Octeon: Fix kernel panic on startup from memory corruption During development it was found that a number of builds would panic during the kernel init process, more specifically in 'delayed_fput()'. The panic showed the kernel trying to access a memory address of '0xb7fdc00' while traversing the 'delayed_fput_list' structure. Comparing this memory address to the value of the pointer used on builds that did not panic confirmed that the pointer on crashing builds must have been corrupted at some stage earlier in the init process. By traversing the list earlier and earlier in the code it was found that 'plat_mem_setup()' was responsible for corrupting the list. Specifically the line: memory = cvmx_bootmem_phy_alloc(mem_alloc_size, __pa_symbol(&__init_end), -1, 0x100000, CVMX_BOOTMEM_FLAG_NO_LOCKING); Which would eventually call: cvmx_bootmem_phy_set_size(new_ent_addr, cvmx_bootmem_phy_get_size (ent_addr) - (desired_min_addr - ent_addr)); Where 'new_ent_addr'=0x4800000 (the address of 'delayed_fput_list') and the second argument (size)=0xb7fdc00 (the address causing the kernel panic). The job of this part of 'plat_mem_setup()' is to allocate chunks of memory for the kernel to use. At the start of each chunk of memory the size of the chunk is written, hence the value 0xb7fdc00 is written onto memory at 0x4800000, therefore the kernel panics when it goes back to access 'delayed_fput_list' later on in the initialisation process. On builds that were not crashing it was found that the compiler had placed 'delayed_fput_list' at 0x4800008, meaning it wasn't corrupted (but something else in memory was overwritten). As can be seen in the first function call above the code begins to allocate chunks of memory beginning from the symbol '__init_end'. The MIPS linker script (vmlinux.lds.S) however defines the .bss section to begin after '__init_end'. Therefore memory within the .bss section is allocated to the kernel to use (System.map shows 'delayed_fput_list' and other kernel structures to be in .bss). To stop the kernel panic (and the .bss section being corrupted) memory should begin being allocated from the symbol '_end'. Signed-off-by: Matt Bennett Acked-by: David Daney Cc: linux-mips@linux-mips.org Cc: aleksey.makarov@auriga.com Patchwork: https://patchwork.linux-mips.org/patch/11251/ Signed-off-by: Ralf Baechle --- arch/mips/cavium-octeon/setup.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch/mips') diff --git a/arch/mips/cavium-octeon/setup.c b/arch/mips/cavium-octeon/setup.c index 89a628455bc2..bd634259eab9 100644 --- a/arch/mips/cavium-octeon/setup.c +++ b/arch/mips/cavium-octeon/setup.c @@ -933,7 +933,7 @@ void __init plat_mem_setup(void) while ((boot_mem_map.nr_map < BOOT_MEM_MAP_MAX) && (total < MAX_MEMORY)) { memory = cvmx_bootmem_phy_alloc(mem_alloc_size, - __pa_symbol(&__init_end), -1, + __pa_symbol(&_end), -1, 0x100000, CVMX_BOOTMEM_FLAG_NO_LOCKING); if (memory >= 0) { -- cgit v1.2.3 From d218af78492a36a4ae607c08fedfb59258440314 Mon Sep 17 00:00:00 2001 From: Markos Chandras Date: Fri, 25 Sep 2015 08:17:42 +0100 Subject: MIPS: scall: Always run the seccomp syscall filters The MIPS syscall handler code used to return -ENOSYS on invalid syscalls. Whilst this is expected, it caused problems for seccomp filters because the said filters never had the change to run since the code returned -ENOSYS before triggering them. This caused problems on the chromium testsuite for filters looking for invalid syscalls. This has now changed and the seccomp filters are always run even if the syscall is invalid. We return -ENOSYS once we return from the seccomp filters. Moreover, similar codepaths have been merged in the process which simplifies somewhat the overall syscall code. Signed-off-by: Markos Chandras Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11236/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/scall32-o32.S | 39 ++++++++++++++++----------------------- arch/mips/kernel/scall64-64.S | 38 ++++++++++++++++---------------------- arch/mips/kernel/scall64-n32.S | 19 +++++-------------- arch/mips/kernel/scall64-o32.S | 19 +++++-------------- 4 files changed, 42 insertions(+), 73 deletions(-) (limited to 'arch/mips') diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S index d06e30c1e4cd..65a74e4f0f45 100644 --- a/arch/mips/kernel/scall32-o32.S +++ b/arch/mips/kernel/scall32-o32.S @@ -36,16 +36,8 @@ NESTED(handle_sys, PT_SIZE, sp) lw t1, PT_EPC(sp) # skip syscall on return subu v0, v0, __NR_O32_Linux # check syscall number - sltiu t0, v0, __NR_O32_Linux_syscalls + 1 addiu t1, 4 # skip to next instruction sw t1, PT_EPC(sp) - beqz t0, illegal_syscall - - sll t0, v0, 2 - la t1, sys_call_table - addu t1, t0 - lw t2, (t1) # syscall routine - beqz t2, illegal_syscall sw a3, PT_R26(sp) # save a3 for syscall restarting @@ -96,6 +88,16 @@ loads_done: li t1, _TIF_WORK_SYSCALL_ENTRY and t0, t1 bnez t0, syscall_trace_entry # -> yes +syscall_common: + sltiu t0, v0, __NR_O32_Linux_syscalls + 1 + beqz t0, illegal_syscall + + sll t0, v0, 2 + la t1, sys_call_table + addu t1, t0 + lw t2, (t1) # syscall routine + + beqz t2, illegal_syscall jalr t2 # Do The Real Thing (TM) @@ -116,7 +118,7 @@ o32_syscall_exit: syscall_trace_entry: SAVE_STATIC - move s0, t2 + move s0, v0 move a0, sp /* @@ -129,27 +131,18 @@ syscall_trace_entry: 1: jal syscall_trace_enter - bltz v0, 2f # seccomp failed? Skip syscall + bltz v0, 1f # seccomp failed? Skip syscall + + move v0, s0 # restore syscall - move t0, s0 RESTORE_STATIC lw a0, PT_R4(sp) # Restore argument registers lw a1, PT_R5(sp) lw a2, PT_R6(sp) lw a3, PT_R7(sp) - jalr t0 - - li t0, -EMAXERRNO - 1 # error? - sltu t0, t0, v0 - sw t0, PT_R7(sp) # set error flag - beqz t0, 1f - - lw t1, PT_R2(sp) # syscall number - negu v0 # error - sw t1, PT_R0(sp) # save it for syscall restarting -1: sw v0, PT_R2(sp) # result + j syscall_common -2: j syscall_exit +1: j syscall_exit /* ------------------------------------------------------------------------ */ diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S index 428c2cd2326c..e732981cf99f 100644 --- a/arch/mips/kernel/scall64-64.S +++ b/arch/mips/kernel/scall64-64.S @@ -39,18 +39,11 @@ NESTED(handle_sys64, PT_SIZE, sp) .set at #endif - dsubu t0, v0, __NR_64_Linux # check syscall number - sltiu t0, t0, __NR_64_Linux_syscalls + 1 #if !defined(CONFIG_MIPS32_O32) && !defined(CONFIG_MIPS32_N32) ld t1, PT_EPC(sp) # skip syscall on return daddiu t1, 4 # skip to next instruction sd t1, PT_EPC(sp) #endif - beqz t0, illegal_syscall - - dsll t0, v0, 3 # offset into table - ld t2, (sys_call_table - (__NR_64_Linux * 8))(t0) - # syscall routine sd a3, PT_R26(sp) # save a3 for syscall restarting @@ -59,6 +52,17 @@ NESTED(handle_sys64, PT_SIZE, sp) and t0, t1, t0 bnez t0, syscall_trace_entry +syscall_common: + dsubu t2, v0, __NR_64_Linux + sltiu t0, t2, __NR_64_Linux_syscalls + 1 + beqz t0, illegal_syscall + + dsll t0, t2, 3 # offset into table + dla t2, sys_call_table + daddu t0, t2, t0 + ld t2, (t0) # syscall routine + beqz t2, illegal_syscall + jalr t2 # Do The Real Thing (TM) li t0, -EMAXERRNO - 1 # error? @@ -78,14 +82,14 @@ n64_syscall_exit: syscall_trace_entry: SAVE_STATIC - move s0, t2 + move s0, v0 move a0, sp move a1, v0 jal syscall_trace_enter - bltz v0, 2f # seccomp failed? Skip syscall + bltz v0, 1f # seccomp failed? Skip syscall - move t0, s0 + move v0, s0 RESTORE_STATIC ld a0, PT_R4(sp) # Restore argument registers ld a1, PT_R5(sp) @@ -93,19 +97,9 @@ syscall_trace_entry: ld a3, PT_R7(sp) ld a4, PT_R8(sp) ld a5, PT_R9(sp) - jalr t0 - - li t0, -EMAXERRNO - 1 # error? - sltu t0, t0, v0 - sd t0, PT_R7(sp) # set error flag - beqz t0, 1f - - ld t1, PT_R2(sp) # syscall number - dnegu v0 # error - sd t1, PT_R0(sp) # save it for syscall restarting -1: sd v0, PT_R2(sp) # result + j syscall_common -2: j syscall_exit +1: j syscall_exit illegal_syscall: /* This also isn't a 64-bit syscall, throw an error. */ diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S index 3868cf4c83df..c79484397584 100644 --- a/arch/mips/kernel/scall64-n32.S +++ b/arch/mips/kernel/scall64-n32.S @@ -52,6 +52,7 @@ NESTED(handle_sysn32, PT_SIZE, sp) and t0, t1, t0 bnez t0, n32_syscall_trace_entry +syscall_common: jalr t2 # Do The Real Thing (TM) li t0, -EMAXERRNO - 1 # error? @@ -75,9 +76,9 @@ n32_syscall_trace_entry: move a1, v0 jal syscall_trace_enter - bltz v0, 2f # seccomp failed? Skip syscall + bltz v0, 1f # seccomp failed? Skip syscall - move t0, s0 + move t2, s0 RESTORE_STATIC ld a0, PT_R4(sp) # Restore argument registers ld a1, PT_R5(sp) @@ -85,19 +86,9 @@ n32_syscall_trace_entry: ld a3, PT_R7(sp) ld a4, PT_R8(sp) ld a5, PT_R9(sp) - jalr t0 + j syscall_common - li t0, -EMAXERRNO - 1 # error? - sltu t0, t0, v0 - sd t0, PT_R7(sp) # set error flag - beqz t0, 1f - - ld t1, PT_R2(sp) # syscall number - dnegu v0 # error - sd t1, PT_R0(sp) # save it for syscall restarting -1: sd v0, PT_R2(sp) # result - -2: j syscall_exit +1: j syscall_exit not_n32_scall: /* This is not an n32 compatibility syscall, pass it on to diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S index 6622980d82ea..6369cfd390c6 100644 --- a/arch/mips/kernel/scall64-o32.S +++ b/arch/mips/kernel/scall64-o32.S @@ -87,6 +87,7 @@ loads_done: and t0, t1, t0 bnez t0, trace_a_syscall +syscall_common: jalr t2 # Do The Real Thing (TM) li t0, -EMAXERRNO - 1 # error? @@ -130,9 +131,9 @@ trace_a_syscall: 1: jal syscall_trace_enter - bltz v0, 2f # seccomp failed? Skip syscall + bltz v0, 1f # seccomp failed? Skip syscall - move t0, s0 + move t2, s0 RESTORE_STATIC ld a0, PT_R4(sp) # Restore argument registers ld a1, PT_R5(sp) @@ -142,19 +143,9 @@ trace_a_syscall: ld a5, PT_R9(sp) ld a6, PT_R10(sp) ld a7, PT_R11(sp) # For indirect syscalls - jalr t0 + j syscall_common - li t0, -EMAXERRNO - 1 # error? - sltu t0, t0, v0 - sd t0, PT_R7(sp) # set error flag - beqz t0, 1f - - ld t1, PT_R2(sp) # syscall number - dnegu v0 # error - sd t1, PT_R0(sp) # save it for syscall restarting -1: sd v0, PT_R2(sp) # result - -2: j syscall_exit +1: j syscall_exit /* ------------------------------------------------------------------------ */ -- cgit v1.2.3