From 2abdf791151ea57f71e67136b4aaef96f534bba6 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Thu, 15 Oct 2009 04:13:18 +0000 Subject: Blackfin: H8606/ip0x: drop redundant SPI ctl_reg settings No need to set MSTR in .ctl_reg as the Blackfin SPI bus driver does this already for all parts. Signed-off-by: Mike Frysinger --- arch/blackfin/mach-bf533/boards/H8606.c | 2 -- arch/blackfin/mach-bf533/boards/ip0x.c | 14 -------------- 2 files changed, 16 deletions(-) (limited to 'arch') diff --git a/arch/blackfin/mach-bf533/boards/H8606.c b/arch/blackfin/mach-bf533/boards/H8606.c index 26a04f078a40..4adceb0bdb6d 100644 --- a/arch/blackfin/mach-bf533/boards/H8606.c +++ b/arch/blackfin/mach-bf533/boards/H8606.c @@ -166,7 +166,6 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { #if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE) /* SPI ADC chip */ static struct bfin5xx_spi_chip spi_adc_chip_info = { - .ctl_reg = 0x1000, .enable_dma = 1, /* use dma transfer with this chip*/ .bits_per_word = 16, }; @@ -174,7 +173,6 @@ static struct bfin5xx_spi_chip spi_adc_chip_info = { #if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) static struct bfin5xx_spi_chip ad1836_spi_chip_info = { - .ctl_reg = 0x1000, .enable_dma = 0, .bits_per_word = 16, }; diff --git a/arch/blackfin/mach-bf533/boards/ip0x.c b/arch/blackfin/mach-bf533/boards/ip0x.c index 644be5e5ab6f..48cfbf816b47 100644 --- a/arch/blackfin/mach-bf533/boards/ip0x.c +++ b/arch/blackfin/mach-bf533/boards/ip0x.c @@ -107,20 +107,6 @@ static struct platform_device dm9000_device2 = { #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE) static struct bfin5xx_spi_chip mmc_spi_chip_info = { -/* - * CPOL (Clock Polarity) - * 0 - Active high SCK - * 1 - Active low SCK - * CPHA (Clock Phase) Selects transfer format and operation mode - * 0 - SCLK toggles from middle of the first data bit, slave select - * pins controlled by hardware. - * 1 - SCLK toggles from beginning of first data bit, slave select - * pins controller by user software. - * .ctl_reg = 0x1c00, * CPOL=1,CPHA=1,Sandisk 1G work - * NO NO .ctl_reg = 0x1800, * CPOL=1,CPHA=0 - * NO NO .ctl_reg = 0x1400, * CPOL=0,CPHA=1 - */ - .ctl_reg = 0x1000, /* CPOL=0,CPHA=0,Sandisk 1G work */ .enable_dma = 0, /* if 1 - block!!! */ .bits_per_word = 8, }; -- cgit v1.2.3