From 8d754544202c0e4ef02e9c1abdf379bcf7ef9384 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Thu, 10 Apr 2014 10:51:11 +0200 Subject: drm: Split out drm_probe_helper.c from drm_crtc_helper.c This is leftover stuff from my previous doc round which I kinda wanted to do but didn't yet due to rebase hell. The modeset helpers and the probing helpers a independent and e.g. i915 uses the probing stuff but has its own modeset infrastructure. It hence makes to split this up. While at it add a DOC: comment for the probing libraray. It would be rather neat to pull some of the DocBook documenting these two helpers into in-line DOC: comments. But unfortunately kerneldoc doesn't support markdown or something similar to make nice-looking documentation, so the current state is better. Signed-off-by: Daniel Vetter Signed-off-by: Dave Airlie --- drivers/gpu/drm/drm_crtc_helper.c | 370 -------------------------------------- 1 file changed, 370 deletions(-) (limited to 'drivers/gpu/drm/drm_crtc_helper.c') diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c index c43825e8f5c1..df281b54db01 100644 --- a/drivers/gpu/drm/drm_crtc_helper.c +++ b/drivers/gpu/drm/drm_crtc_helper.c @@ -72,147 +72,6 @@ void drm_helper_move_panel_connectors_to_head(struct drm_device *dev) } EXPORT_SYMBOL(drm_helper_move_panel_connectors_to_head); -static bool drm_kms_helper_poll = true; -module_param_named(poll, drm_kms_helper_poll, bool, 0600); - -static void drm_mode_validate_flag(struct drm_connector *connector, - int flags) -{ - struct drm_display_mode *mode; - - if (flags == (DRM_MODE_FLAG_DBLSCAN | DRM_MODE_FLAG_INTERLACE | - DRM_MODE_FLAG_3D_MASK)) - return; - - list_for_each_entry(mode, &connector->modes, head) { - if ((mode->flags & DRM_MODE_FLAG_INTERLACE) && - !(flags & DRM_MODE_FLAG_INTERLACE)) - mode->status = MODE_NO_INTERLACE; - if ((mode->flags & DRM_MODE_FLAG_DBLSCAN) && - !(flags & DRM_MODE_FLAG_DBLSCAN)) - mode->status = MODE_NO_DBLESCAN; - if ((mode->flags & DRM_MODE_FLAG_3D_MASK) && - !(flags & DRM_MODE_FLAG_3D_MASK)) - mode->status = MODE_NO_STEREO; - } - - return; -} - -/** - * drm_helper_probe_single_connector_modes - get complete set of display modes - * @connector: connector to probe - * @maxX: max width for modes - * @maxY: max height for modes - * - * Based on the helper callbacks implemented by @connector try to detect all - * valid modes. Modes will first be added to the connector's probed_modes list, - * then culled (based on validity and the @maxX, @maxY parameters) and put into - * the normal modes list. - * - * Intended to be use as a generic implementation of the ->fill_modes() - * @connector vfunc for drivers that use the crtc helpers for output mode - * filtering and detection. - * - * Returns: - * The number of modes found on @connector. - */ -int drm_helper_probe_single_connector_modes(struct drm_connector *connector, - uint32_t maxX, uint32_t maxY) -{ - struct drm_device *dev = connector->dev; - struct drm_display_mode *mode; - struct drm_connector_helper_funcs *connector_funcs = - connector->helper_private; - int count = 0; - int mode_flags = 0; - bool verbose_prune = true; - - WARN_ON(!mutex_is_locked(&dev->mode_config.mutex)); - - DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n", connector->base.id, - drm_get_connector_name(connector)); - /* set all modes to the unverified state */ - list_for_each_entry(mode, &connector->modes, head) - mode->status = MODE_UNVERIFIED; - - if (connector->force) { - if (connector->force == DRM_FORCE_ON) - connector->status = connector_status_connected; - else - connector->status = connector_status_disconnected; - if (connector->funcs->force) - connector->funcs->force(connector); - } else { - connector->status = connector->funcs->detect(connector, true); - } - - /* Re-enable polling in case the global poll config changed. */ - if (drm_kms_helper_poll != dev->mode_config.poll_running) - drm_kms_helper_poll_enable(dev); - - dev->mode_config.poll_running = drm_kms_helper_poll; - - if (connector->status == connector_status_disconnected) { - DRM_DEBUG_KMS("[CONNECTOR:%d:%s] disconnected\n", - connector->base.id, drm_get_connector_name(connector)); - drm_mode_connector_update_edid_property(connector, NULL); - verbose_prune = false; - goto prune; - } - -#ifdef CONFIG_DRM_LOAD_EDID_FIRMWARE - count = drm_load_edid_firmware(connector); - if (count == 0) -#endif - count = (*connector_funcs->get_modes)(connector); - - if (count == 0 && connector->status == connector_status_connected) - count = drm_add_modes_noedid(connector, 1024, 768); - if (count == 0) - goto prune; - - drm_mode_connector_list_update(connector); - - if (maxX && maxY) - drm_mode_validate_size(dev, &connector->modes, maxX, maxY); - - if (connector->interlace_allowed) - mode_flags |= DRM_MODE_FLAG_INTERLACE; - if (connector->doublescan_allowed) - mode_flags |= DRM_MODE_FLAG_DBLSCAN; - if (connector->stereo_allowed) - mode_flags |= DRM_MODE_FLAG_3D_MASK; - drm_mode_validate_flag(connector, mode_flags); - - list_for_each_entry(mode, &connector->modes, head) { - if (mode->status == MODE_OK) - mode->status = connector_funcs->mode_valid(connector, - mode); - } - -prune: - drm_mode_prune_invalid(dev, &connector->modes, verbose_prune); - - if (list_empty(&connector->modes)) - return 0; - - list_for_each_entry(mode, &connector->modes, head) - mode->vrefresh = drm_mode_vrefresh(mode); - - drm_mode_sort(&connector->modes); - - DRM_DEBUG_KMS("[CONNECTOR:%d:%s] probed modes :\n", connector->base.id, - drm_get_connector_name(connector)); - list_for_each_entry(mode, &connector->modes, head) { - drm_mode_set_crtcinfo(mode, CRTC_INTERLACE_HALVE_V); - drm_mode_debug_printmodeline(mode); - } - - return count; -} -EXPORT_SYMBOL(drm_helper_probe_single_connector_modes); - /** * drm_helper_encoder_in_use - check if a given encoder is in use * @encoder: encoder to check @@ -1020,232 +879,3 @@ void drm_helper_resume_force_mode(struct drm_device *dev) drm_modeset_unlock_all(dev); } EXPORT_SYMBOL(drm_helper_resume_force_mode); - -/** - * drm_kms_helper_hotplug_event - fire off KMS hotplug events - * @dev: drm_device whose connector state changed - * - * This function fires off the uevent for userspace and also calls the - * output_poll_changed function, which is most commonly used to inform the fbdev - * emulation code and allow it to update the fbcon output configuration. - * - * Drivers should call this from their hotplug handling code when a change is - * detected. Note that this function does not do any output detection of its - * own, like drm_helper_hpd_irq_event() does - this is assumed to be done by the - * driver already. - * - * This function must be called from process context with no mode - * setting locks held. - */ -void drm_kms_helper_hotplug_event(struct drm_device *dev) -{ - /* send a uevent + call fbdev */ - drm_sysfs_hotplug_event(dev); - if (dev->mode_config.funcs->output_poll_changed) - dev->mode_config.funcs->output_poll_changed(dev); -} -EXPORT_SYMBOL(drm_kms_helper_hotplug_event); - -#define DRM_OUTPUT_POLL_PERIOD (10*HZ) -static void output_poll_execute(struct work_struct *work) -{ - struct delayed_work *delayed_work = to_delayed_work(work); - struct drm_device *dev = container_of(delayed_work, struct drm_device, mode_config.output_poll_work); - struct drm_connector *connector; - enum drm_connector_status old_status; - bool repoll = false, changed = false; - - if (!drm_kms_helper_poll) - return; - - mutex_lock(&dev->mode_config.mutex); - list_for_each_entry(connector, &dev->mode_config.connector_list, head) { - - /* Ignore forced connectors. */ - if (connector->force) - continue; - - /* Ignore HPD capable connectors and connectors where we don't - * want any hotplug detection at all for polling. */ - if (!connector->polled || connector->polled == DRM_CONNECTOR_POLL_HPD) - continue; - - repoll = true; - - old_status = connector->status; - /* if we are connected and don't want to poll for disconnect - skip it */ - if (old_status == connector_status_connected && - !(connector->polled & DRM_CONNECTOR_POLL_DISCONNECT)) - continue; - - connector->status = connector->funcs->detect(connector, false); - if (old_status != connector->status) { - const char *old, *new; - - old = drm_get_connector_status_name(old_status); - new = drm_get_connector_status_name(connector->status); - - DRM_DEBUG_KMS("[CONNECTOR:%d:%s] " - "status updated from %s to %s\n", - connector->base.id, - drm_get_connector_name(connector), - old, new); - - changed = true; - } - } - - mutex_unlock(&dev->mode_config.mutex); - - if (changed) - drm_kms_helper_hotplug_event(dev); - - if (repoll) - schedule_delayed_work(delayed_work, DRM_OUTPUT_POLL_PERIOD); -} - -/** - * drm_kms_helper_poll_disable - disable output polling - * @dev: drm_device - * - * This function disables the output polling work. - * - * Drivers can call this helper from their device suspend implementation. It is - * not an error to call this even when output polling isn't enabled or arlready - * disabled. - */ -void drm_kms_helper_poll_disable(struct drm_device *dev) -{ - if (!dev->mode_config.poll_enabled) - return; - cancel_delayed_work_sync(&dev->mode_config.output_poll_work); -} -EXPORT_SYMBOL(drm_kms_helper_poll_disable); - -/** - * drm_kms_helper_poll_enable - re-enable output polling. - * @dev: drm_device - * - * This function re-enables the output polling work. - * - * Drivers can call this helper from their device resume implementation. It is - * an error to call this when the output polling support has not yet been set - * up. - */ -void drm_kms_helper_poll_enable(struct drm_device *dev) -{ - bool poll = false; - struct drm_connector *connector; - - if (!dev->mode_config.poll_enabled || !drm_kms_helper_poll) - return; - - list_for_each_entry(connector, &dev->mode_config.connector_list, head) { - if (connector->polled & (DRM_CONNECTOR_POLL_CONNECT | - DRM_CONNECTOR_POLL_DISCONNECT)) - poll = true; - } - - if (poll) - schedule_delayed_work(&dev->mode_config.output_poll_work, DRM_OUTPUT_POLL_PERIOD); -} -EXPORT_SYMBOL(drm_kms_helper_poll_enable); - -/** - * drm_kms_helper_poll_init - initialize and enable output polling - * @dev: drm_device - * - * This function intializes and then also enables output polling support for - * @dev. Drivers which do not have reliable hotplug support in hardware can use - * this helper infrastructure to regularly poll such connectors for changes in - * their connection state. - * - * Drivers can control which connectors are polled by setting the - * DRM_CONNECTOR_POLL_CONNECT and DRM_CONNECTOR_POLL_DISCONNECT flags. On - * connectors where probing live outputs can result in visual distortion drivers - * should not set the DRM_CONNECTOR_POLL_DISCONNECT flag to avoid this. - * Connectors which have no flag or only DRM_CONNECTOR_POLL_HPD set are - * completely ignored by the polling logic. - * - * Note that a connector can be both polled and probed from the hotplug handler, - * in case the hotplug interrupt is known to be unreliable. - */ -void drm_kms_helper_poll_init(struct drm_device *dev) -{ - INIT_DELAYED_WORK(&dev->mode_config.output_poll_work, output_poll_execute); - dev->mode_config.poll_enabled = true; - - drm_kms_helper_poll_enable(dev); -} -EXPORT_SYMBOL(drm_kms_helper_poll_init); - -/** - * drm_kms_helper_poll_fini - disable output polling and clean it up - * @dev: drm_device - */ -void drm_kms_helper_poll_fini(struct drm_device *dev) -{ - drm_kms_helper_poll_disable(dev); -} -EXPORT_SYMBOL(drm_kms_helper_poll_fini); - -/** - * drm_helper_hpd_irq_event - hotplug processing - * @dev: drm_device - * - * Drivers can use this helper function to run a detect cycle on all connectors - * which have the DRM_CONNECTOR_POLL_HPD flag set in their &polled member. All - * other connectors are ignored, which is useful to avoid reprobing fixed - * panels. - * - * This helper function is useful for drivers which can't or don't track hotplug - * interrupts for each connector. - * - * Drivers which support hotplug interrupts for each connector individually and - * which have a more fine-grained detect logic should bypass this code and - * directly call drm_kms_helper_hotplug_event() in case the connector state - * changed. - * - * This function must be called from process context with no mode - * setting locks held. - * - * Note that a connector can be both polled and probed from the hotplug handler, - * in case the hotplug interrupt is known to be unreliable. - */ -bool drm_helper_hpd_irq_event(struct drm_device *dev) -{ - struct drm_connector *connector; - enum drm_connector_status old_status; - bool changed = false; - - if (!dev->mode_config.poll_enabled) - return false; - - mutex_lock(&dev->mode_config.mutex); - list_for_each_entry(connector, &dev->mode_config.connector_list, head) { - - /* Only handle HPD capable connectors. */ - if (!(connector->polled & DRM_CONNECTOR_POLL_HPD)) - continue; - - old_status = connector->status; - - connector->status = connector->funcs->detect(connector, false); - DRM_DEBUG_KMS("[CONNECTOR:%d:%s] status updated from %s to %s\n", - connector->base.id, - drm_get_connector_name(connector), - drm_get_connector_status_name(old_status), - drm_get_connector_status_name(connector->status)); - if (old_status != connector->status) - changed = true; - } - - mutex_unlock(&dev->mode_config.mutex); - - if (changed) - drm_kms_helper_hotplug_event(dev); - - return changed; -} -EXPORT_SYMBOL(drm_helper_hpd_irq_event); -- cgit v1.2.3