From 2e93cac90c4b063c8732deb727a192dea1119640 Mon Sep 17 00:00:00 2001 From: Rafał Miłecki Date: Fri, 16 May 2014 11:10:29 +0200 Subject: drm/radeon/hdmi: DCE3: clean ACR control MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit What initially seemed to be a typo in fglrx (using register 0x740c instead of 0x74dc) appeared to be a correct behavior. DCE3 has ACR and CRC registers swapped which explains why we needed WREG32(HDMI0_AUDIO_CRC_CONTROL + offset, 0x1000); This has been tested for possible regressions on DCE3 HD3470 (RV620). Signed-off-by: Rafał Miłecki Signed-off-by: Alex Deucher --- drivers/gpu/drm/radeon/r600_hdmi.c | 8 +++++--- drivers/gpu/drm/radeon/r600d.h | 2 ++ 2 files changed, 7 insertions(+), 3 deletions(-) (limited to 'drivers/gpu/drm/radeon') diff --git a/drivers/gpu/drm/radeon/r600_hdmi.c b/drivers/gpu/drm/radeon/r600_hdmi.c index b8b2efac2dbe..a828222e816c 100644 --- a/drivers/gpu/drm/radeon/r600_hdmi.c +++ b/drivers/gpu/drm/radeon/r600_hdmi.c @@ -332,6 +332,7 @@ void r600_hdmi_setmode(struct drm_encoder *encoder, struct drm_display_mode *mod u8 buffer[HDMI_INFOFRAME_HEADER_SIZE + HDMI_AVI_INFOFRAME_SIZE]; struct hdmi_avi_infoframe frame; uint32_t offset; + uint32_t acr_ctl; ssize_t err; if (!dig || !dig->afmt) @@ -351,15 +352,16 @@ void r600_hdmi_setmode(struct drm_encoder *encoder, struct drm_display_mode *mod WREG32(HDMI0_VBI_PACKET_CONTROL + offset, HDMI0_NULL_SEND); /* send null packets when required */ - WREG32(HDMI0_AUDIO_CRC_CONTROL + offset, 0x1000); - WREG32(HDMI0_AUDIO_PACKET_CONTROL + offset, HDMI0_AUDIO_SAMPLE_SEND | /* send audio packets */ HDMI0_AUDIO_DELAY_EN(1) | /* default audio delay */ HDMI0_AUDIO_PACKETS_PER_LINE(3) | /* should be suffient for all audio modes and small enough for all hblanks */ HDMI0_60958_CS_UPDATE); /* allow 60958 channel status fields to be updated */ - WREG32(HDMI0_ACR_PACKET_CONTROL + offset, + /* DCE 3.0 uses register that's normally for CRC_CONTROL */ + acr_ctl = ASIC_IS_DCE3(rdev) ? DCE3_HDMI0_ACR_PACKET_CONTROL : + HDMI0_ACR_PACKET_CONTROL; + WREG32(acr_ctl + offset, HDMI0_ACR_SOURCE | /* select SW CTS value - XXX verify that hw CTS works on all families */ HDMI0_ACR_AUTO_SEND); /* allow hw to sent ACR packets when required */ diff --git a/drivers/gpu/drm/radeon/r600d.h b/drivers/gpu/drm/radeon/r600d.h index 37455f65107f..10380c5322a3 100644 --- a/drivers/gpu/drm/radeon/r600d.h +++ b/drivers/gpu/drm/radeon/r600d.h @@ -1038,6 +1038,7 @@ # define HDMI0_AZ_FORMAT_WTRIG_ACK (1 << 29) #define HDMI0_AUDIO_CRC_CONTROL 0x740c # define HDMI0_AUDIO_CRC_EN (1 << 0) +#define DCE3_HDMI0_ACR_PACKET_CONTROL 0x740c #define HDMI0_VBI_PACKET_CONTROL 0x7410 # define HDMI0_NULL_SEND (1 << 0) # define HDMI0_GC_SEND (1 << 4) @@ -1166,6 +1167,7 @@ # define HDMI0_ACR_48 3 # define HDMI0_ACR_SOURCE (1 << 8) /* 0 - hw; 1 - cts value */ # define HDMI0_ACR_AUTO_SEND (1 << 12) +#define DCE3_HDMI0_AUDIO_CRC_CONTROL 0x74dc #define HDMI0_RAMP_CONTROL0 0x74e0 # define HDMI0_RAMP_MAX_COUNT(x) (((x) & 0xffffff) << 0) #define HDMI0_RAMP_CONTROL1 0x74e4 -- cgit v1.2.3